AMD

XC7Z020-L1CLG400I - 667MHz Zynq SoC FPGA | AMD

料号: XC7Z020-L1CLG400I ✓ 量产中
400-CSPBGA (17 x 17 mm) Package 667 MHz Speed
最小起订量: 1 |

XC7Z020-L1CLG400I 概述

The AMD XC7Z020-L1CLG400I is a Zynq-7000 SoC FPGA combining a dual-core ARM Cortex-A9 MPCore processor with CoreSight debug support and an Artix-7 FPGA fabric. The device provides 85K logic cells, operates at up to 667 MHz, and is packaged in a 400-pin CSPBGA measuring 17 x 17 mm. It is designed for embedded systems that combine hardware acceleration, processor-based control, and programmable logic in one device.

A Zynq-7000 SoC is a system-on-chip platform that integrates a hard processor subsystem with programmable FPGA logic. The ARM Cortex-A9 processor subsystem handles operating-system and application software, while the Artix-7 fabric accelerates parallel data processing, control logic, interfaces, and other time-critical functions. This combination reduces component count and simplifies communication between software and programmable hardware compared with separate processor and FPGA designs.

Key features include a dual ARM Cortex-A9 MPCore processor, CoreSight debugging, 85K logic cells, and a 667 MHz operating frequency. The L1 speed grade and industrial temperature suffix identify this as a low-power industrial-grade configuration. The CLG400 package provides 400 physical balls in a 17 x 17 mm CSPBGA footprint, allowing a large number of I/O and power connections on a compact board.

The device supports the Zynq-7000 family architecture, including programmable logic resources, hard processor functionality, dedicated memory interfaces, and integrated debug capabilities. This makes it suitable for designs requiring both sequential control and parallel hardware processing. The exact I/O count, memory capacity, power ratings, and detailed timing limits are not stated in the distributor summaries and should be taken from the AMD Zynq-7000 data sheet.

Typical applications include industrial automation, embedded control, communications equipment, test and measurement systems, image-processing front ends, and general-purpose embedded platforms. In these systems, the processor can run control software or an operating system while FPGA logic handles deterministic interfaces, signal conditioning, protocol conversion, or parallel data acquisition.

The 400-ball CSPBGA package requires careful PCB layout, including controlled-impedance routing, multiple power rails, adequate decoupling, and thermal management. Use the AMD Zynq-7000 package pinout files and the corresponding device data sheet when assigning power, ground, configuration, clock, and I/O balls; do not infer ball assignments from a generic BGA drawing.

This page organizes the verified product identity, package information, technical distinctions, drop-in alternatives, application context, and engineering guidance for engineers evaluating the XC7Z020-L1CLG400I. The most important selection checks are processor and FPGA resource compatibility, industrial temperature requirements, speed grade, package footprint, power sequencing, and toolchain support for the deployed Zynq design.

直接替换替代料: XC7Z020-L1CLG400I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: XC7Z020-L1CLG400I (相同外形与封装尺寸) ——差异在于 Device Type, Mounting Type, Package Dimensions, Processor Core, Temperature Grade.

AMD
Device Type: Zynq-7000 ARM Cortex-A9 and Artix-7 FPGA system-on-chip
Mounting Type: Surface mount chip-scale BGA
Package Dimensions: 17 mm x 17 mm
对比 XC7Z020-L1CLG400I →
AMD
Device Type: Zynq-7000 system-on-chip with Artix-7 FPGA logic
Package Dimensions: 17 x 17 mm
Processor Core: Dual Arm Cortex-A9 MPCore
对比 XC7Z020-L1CLG400I →
AMD
Device Type: Zynq-7000 Artix-7 FPGA system on chip
Package Dimensions: 17 mm x 17 mm
Processor Core: Dual ARM Cortex-A9 MPCore
对比 XC7Z020-L1CLG400I →

XC7Z020-1CLG400I

✅ 直接替换
AMD
📦 400-CSPBGA (17 x 17 mm)
Zynq-7000 system-on-chip with Artix-7 FPGA logic · Dual Arm Cortex-A9 MPCore · 667 MHz · 85K logic cells · CoreSight · 400-CSPBGA · 17 x 17 mm · 400 pins

联系询价

查看数据手册 →

XC7Z020-2CLG400I

✅ 直接替换
AMD
📦 400-CSPBGA (17 x 17 mm)
Zynq-7000 Artix-7 FPGA system on chip · Dual ARM Cortex-A9 MPCore · 766 MHz · 85K logic cells · CoreSight · Artix-7 · Zynq-7000 · Zynq-7000 SoC with ARM Cortex-A9 MPCore and programmable FPGA logic

联系询价

查看数据手册 →

XC7Z020-1CLG400C

✅ 直接替换
AMD
📦 400-CSPBGA (17 x 17 mm)
Zynq-7000 ARM Cortex-A9 and Artix-7 FPGA system-on-chip · Dual ARM Cortex-A9 MPCore with CoreSight · 667 MHz · 85K logic cells · Artix-7 · 400-CSPBGA · 17 mm x 17 mm · 400 balls

联系询价

查看数据手册 →

XC7Z010-L1CLG400I

✅ 直接替换
AMD
📦 400-CSPBGA (17 x 17 mm)
Zynq-7000 programmable system on chip · Dual-core ARM Cortex-A9 MPCore · 667 MHz · Artix-7 · 28K logic cells · 256 KB · CoreSight · 400-CSPBGA

联系询价

查看数据手册 →

XC7Z010-1CLG400I

✅ 直接替换
📦 400-CSPBGA (17 x 17 mm)
兼容规格

联系询价

XA7Z010-1CLG400I

✅ 直接替换
📦 400-CSPBGA (17 x 17 mm)
Same CLG400 package family, but XA7Z010 has reduced XC7Z020 resources and a -1 speed grade; FPGA, timing, memory, and power constraints require revalidation

📋 参考替代料(不在目录中)

XC7Z020-L1CLG400I 最大额定值与电气特性

Device Type Zynq-7000 SoC FPGA
Processor Dual ARM Cortex-A9 MPCore
Processor Maximum Frequency 667 MHz
FPGA Family Artix-7
Logic Cells 85K
Debug Support CoreSight
封装 400-CSPBGA (17 x 17 mm)
Package Pin or Ball Count 400 balls
安装类型 Surface Mount
Temperature Grade Industrial
Speed Grade L1

XC7Z020-L1CLG400I 400 balls 引脚配置指南

XC7Z020-L1CLG400I(400 balls 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XC7Z020-L1CLG400I 的 400 balls 封装引脚图

暂无详细引脚数据: XC7Z020-L1CLG400I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XC7Z020-L1CLG400I 适用于 6 应用s: Industrial Automation Controller, Communications Gateway, Test and Measurement System, Image Processing Front End, Industrial Sensor Hub, Secure Embedded Platform.

🏭

Industrial Automation Controller

The AMD XC7Z020-L1CLG400I fits industrial automation controllers because it combines a dual ARM Cortex-A9 processor running at up to 667 MHz with an 85K-logic-cell Artix-7 fabric. Software can manage communications, configuration, and supervisory functions, while programmable logic handles deterministic machine timing and parallel I/O. The 400-CSPBGA package supplies a concentrated connection set for complex controllers, while the L1 low-power designation makes it a sensible starting point for power-constrained embedded equipment. Confirm the exact operating-temperature range, supply rails, power budget, and industrial qualification requirements in the AMD Zynq-7000 documentation before production release.

🌐

Communications Gateway

The XC7Z020-L1CLG400I is suitable for communications gateways that need protocol handling, network services, and hardware-accelerated datapaths in one package. The ARM Cortex-A9 subsystem can run networking or control software, while the Artix-7 fabric can implement parallel packet handling, custom serializers, or low-latency interface logic. Its 667 MHz processor performance and 85K logic cells provide a useful balance for edge gateways that must fit a compact board. Use the CLG400 package files to assign high-speed I/O, power, clocks, and configuration signals, and validate signal integrity with the complete PCB stack-up.

🔧

Test and Measurement System

The AMD XC7Z020-L1CLG400I can implement a mixed-signal test instrument by using the FPGA fabric for acquisition logic, timing control, and stimulus generation while the ARM subsystem handles instrument control, data preparation, and user-facing software. The 85K logic cells make the device relevant for moderate parallel-channel systems, while the processor simplifies control-flow and data-transfer tasks. The L1 low-power speed designation can benefit portable or rack-mounted systems, but total thermal design must include processor, FPGA, memory, and I/O activity. Derive power and junction-temperature limits from AMD data rather than estimating them from the 667 MHz frequency.

📷

Image Processing Front End

The XC7Z020-L1CLG400I can serve as an image-processing front end when a design combines sensor-interface timing with higher-level processing. The Artix-7 fabric can implement parallel pixel pipelines, lookup tables, thresholding, or compression stages, while the dual ARM Cortex-A9 subsystem manages configuration and application-level tasks. This division supports streaming architectures that would otherwise require a separate processor and FPGA. The device's 667 MHz CPU rating and 85K logic-cell count should be matched to the actual channel count, pixel rate, and memory bandwidth. Validate memory interfaces and high-speed I/O against the exact package and timing constraints.

🧩

Industrial Sensor Hub

The XC7Z020-L1CLG400I is appropriate for an industrial sensor hub that must collect multiple inputs, perform local filtering, and present processed data through an embedded protocol stack. The FPGA fabric can implement sensor timing, digital filtering, diagnostics, and data packing, while the ARM Cortex-A9 processors handle configuration, logging, and network communication. The CLG400 package provides many package balls for power, clock, control, and mixed I/O assignments, and the L1 low-power grade is relevant where cooling or battery capacity is constrained. Confirm that every required interface and voltage rail is present in the exact CLG400 package and that the industrial temperature requirements are met.

🔐

Secure Embedded Platform

The XC7Z020-L1CLG400I can support secure embedded platforms where Linux-capable processor software must coexist with protected programmable logic and custom peripherals. The ARM subsystem can manage authentication, policy, and application services, while isolated FPGA logic can implement hardware-assisted security, secure I/O, or fixed-function data paths. CoreSight debug capability assists development and diagnostics, although production security still requires appropriate debug-access controls, boot protection, and key-management design. Because the verified information does not state the device's specific security features, use the AMD Zynq-7000 data sheet and device security documentation before making a compliance claim.

What is the AMD XC7Z020-L1CLG400I?
The AMD XC7Z020-L1CLG400I is a Zynq-7000 SoC FPGA with a dual-core ARM Cortex-A9 MPCore processor, CoreSight debug support, 85K Artix-7 logic cells, and a maximum processor frequency of 667 MHz. The device is packaged in a 400-CSPBGA package measuring 17 x 17 mm. Its combination of a hard processor subsystem and programmable FPGA fabric supports embedded software, hardware acceleration, control logic, and parallel data processing in one device.
What is the XC7Z020-L1CLG400I used for?
The XC7Z020-L1CLG400I is used in embedded designs that need processor-based control together with programmable hardware. Typical uses include industrial automation, communications equipment, test and measurement, image-processing interfaces, and high-speed data acquisition. The ARM Cortex-A9 subsystem can run application software while the 85K-logic-cell Artix-7 fabric handles deterministic control, protocol conversion, parallel processing, and custom I/O functions.
What is the difference between XC7Z020-L1CLG400I and XC7Z020-1CLG400I?
The XC7Z020-L1CLG400I uses the L1 speed-grade designation, while XC7Z020-1CLG400I uses the -1 speed grade. AMD support discussions identify the L1 variant as a low-power version, while the distributor listing identifies the -1 device as a 667 MHz dual Cortex-A9 Zynq SoC with 85K logic cells. Both use the CLG400 package, but final timing, power, and qualification decisions should be checked against the AMD device documentation.
Is XC7Z020-L1CLG400I compatible with XC7Z020-1CLG400I?
XC7Z020-1CLG400I is a close same-package alternative because it uses the same XC7Z020 device family and CLG400 400-ball package. It is not necessarily a temperature-grade or power-equivalent replacement for every design: the XC7Z020-L1CLG400I carries the L1 low-power speed designation and industrial suffix. Verify operating-temperature limits, timing constraints, power budgets, and the generated bitstream configuration before substituting it in production equipment.
What is the best drop-in replacement for XC7Z020-L1CLG400I?
The closest package-compatible replacement identified for the XC7Z020-L1CLG400I is the AMD XC7Z020-1CLG400I, which uses the same CLG400 package and XC7Z020 platform. The replacement still requires validation because speed-grade and temperature behavior can differ. For commercial-temperature applications, XC7Z020-1CLG400C is another same-package option, but it is not suitable where the original industrial-temperature requirements must be preserved.
Can XC7Z010-L1CLG400I replace XC7Z020-L1CLG400I?
XC7Z010-L1CLG400I can be considered for some CLG400 board-level migrations because it uses the same package family and is identified in cross-reference results, but it is not an equivalent XC7Z020 resource match. The XC7Z010 has fewer logic resources and less memory than the XC7Z020, so the FPGA project, timing constraints, memory interfaces, and software image must be revalidated. A direct drop-in decision requires a complete design audit rather than package appearance alone.
Where can I download the XC7Z020-L1CLG400I datasheet?
The manufacturer datasheet is available through the AMD documentation URL for the Zynq-7000 SoC family, while the distributor search results also include a dedicated datasheet page for XC7Z020-L1CLG400I. The AMD document is the preferred source for DC and AC switching characteristics. Use the package pinout files published by AMD for the CLG400 package and match the exact device variant before assigning connections.
Where can I find the XC7Z020-L1CLG400I pinout?
The XC7Z020-L1CLG400I pinout is maintained in AMD's Zynq-7000 package device pinout files, which include ASCII and CSV package files. The CLG400 package contains 400 balls, so a complete design must use the package file rather than a partial connector or symbol. Confirm ball numbers, power and ground assignments, configuration pins, clock pins, and I/O banks against the exact XC7Z020 device and its speed-grade suffix.
Is XC7Z020-L1CLG400I suitable for industrial equipment?
The XC7Z020-L1CLG400I is identified by the industrial-grade I suffix and the L1 speed designation, making it the appropriate starting point for industrial equipment when the complete operating-temperature and reliability requirements are satisfied. The distributor listing does not provide the numeric temperature limits, so consult the AMD Zynq-7000 data sheet for the exact range, as well as any system-level environmental, shock, vibration, and EMC requirements.
How much power does XC7Z020-L1CLG400I consume?
The verified distributor summaries do not state a numeric power-consumption value for the XC7Z020-L1CLG400I, so the device power must be obtained from the AMD Zynq-7000 data sheet and the relevant operating conditions. Do not use the processor's 667 MHz frequency alone to estimate consumption. Actual system power depends on enabled FPGA resources, I/O activity, processor utilization, memory activity, voltage settings, temperature, and the power-management state configured in the design.
Does XC7Z020-L1CLG400I support CoreSight debugging?
Yes. The product listing identifies the XC7Z020-L1CLG400I as a dual ARM Cortex-A9 MPCore system-on-chip with CoreSight support. CoreSight provides dedicated debug and trace capabilities for the processor subsystem, which can assist software development, fault diagnosis, and hardware-assisted validation. The exact debug interfaces, trace resources, and access requirements should be checked in the AMD device documentation and the system debug design.
How does XC7Z020-L1CLG400I compare with XC7Z020-1CLG400I for power consumption?
The XC7Z020-L1CLG400I is the low-power L1-speed designation, while XC7Z020-1CLG400I is the -1-speed version. AMD support material explicitly notes the L1 designation as a low-power version, making the L1 part the more relevant starting point when lower power is a primary requirement. A precise power comparison still requires operating-point data because FPGA utilization, I/O activity, processor load, and memory traffic strongly affect total consumption.
Which AMD tools support XC7Z020-L1CLG400I?
The XC7Z020-L1CLG400I is a Zynq-7000 device and is supported by the AMD/Xilinx FPGA and embedded-design tool flow used for Artix-7 Zynq devices. The practical toolchain includes device-aware synthesis and implementation, hardware or software development tools, and programming support for the selected board platform. Confirm the installed tool version, device support, operating-system environment, and license requirements for the exact package and design constraints.
Is the XC7Z020-L1CLG400I RoHS compliant?
The verified product information does not explicitly state the RoHS status for the XC7Z020-L1CLG400I, so its compliance status is unknown until confirmed in AMD product documentation or the current product declaration. For regulated equipment, request the applicable RoHS and REACH material declarations for the exact manufacturer part number. Compliance should be verified at the finished-product level as well, since assembly materials and external components affect the final declaration.
Where can I buy XC7Z020-L1CLG400I online?
The XC7Z020-L1CLG400I can be requested through the Request a Quote form on this page. The form is the appropriate channel for current stock, quantity breaks, lead time, and order handling for the exact 400-CSPBGA industrial-grade part. Because availability and pricing can change by quantity and market conditions, request the current quotation directly rather than relying on a stale historical price or an unverified inventory statement.
What is the price of XC7Z020-L1CLG400I?
The current price of the XC7Z020-L1CLG400I is not displayed as a fixed product-page value because pricing changes with quantity, availability, and sourcing conditions. Use the Request a Quote form on this page to obtain the current unit price and volume breaks for the exact MPN. Confirm that the quotation corresponds to the 400-CSPBGA package, L1 speed grade, and industrial-temperature suffix, because related XC7Z020 order codes can have different commercial or speed-grade specifications.
What is the lead time for XC7Z020-L1CLG400I?
The verified product information does not provide a guaranteed lead time for the XC7Z020-L1CLG400I. Request the current lead time and available quantity through the Request a Quote form on this page, including the production quantity and target delivery date. For new industrial or medical equipment, plan additional schedule margin for programming-file validation, PCB assembly, system bring-up, and any required regulatory or customer qualification activities.

工程参考数据: XC7Z020-L1CLG400I ——对比、设计指导和合规信息。

选型指南

Choose the XC7Z020-L1CLG400I when the design needs the full XC7Z020 platform, including 85K logic cells, a dual ARM Cortex-A9 subsystem at up to 667 MHz, and an industrial-grade CLG400 package. It is especially relevant when the L1 low-power speed grade is preferred for power-constrained embedded equipment. XC7Z020-1CLG400I is the closest same-package option when the -1 speed grade better satisfies timing requirements, but power and timing must be compared. XC7Z020-2CLG400I may suit designs needing a higher performance grade, although it is not a power-equivalent choice. XC7Z020-1CLG400C is appropriate only when commercial temperature coverage is acceptable. Consider XC7Z010-L1CLG400I only for resource-reduced migrations after validating FPGA utilization, memory capacity, timing, power, and software compatibility.

与替代料对比

参数 本产品 XC7Z020-1CLG400I XC7Z020-2CLG400I XC7Z020-1CLG400C XC7Z010-L1CLG400I XC7Z010-1CLG400I
Package 400-CSPBGA (17 x 17 mm) 400-CSPBGA (17 x 17 mm) 400-CSPBGA (17 x 17 mm) 400-CSPBGA (17 x 17 mm) 400-CSPBGA (17 x 17 mm) 400-CSPBGA (17 x 17 mm)
Brand AMD AMD AMD AMD AMD AMD
Device Type Zynq-7000 SoC FPGA Zynq-7000 SoC FPGA Zynq-7000 SoC FPGA Zynq-7000 SoC FPGA Zynq-7000 SoC FPGA Zynq-7000 SoC FPGA
Processor Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore
Speed Grade L1 -1 -2 -1 L1 -1
Temperature Grade Industrial Industrial Industrial Commercial Industrial Industrial
FPGA Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7

关键差异点

  • Low-power L1 speed designation (对比 XC7Z020-1CLG400I)
  • Industrial temperature suffix (对比 XC7Z020-1CLG400C)
  • Full XC7Z020 resource class (对比 XC7Z010-L1CLG400I)

设计说明

Treat the CLG400 device as a complex BGA rather than a conventional peripheral. Use AMD's CLG400 package data to place all power, ground, configuration, clock, and I/O balls, and follow the recommended stack-up, via, solder-mask, and land-pattern guidance for the assembly process. Maintain continuous return paths beneath high-speed nets and avoid splits that disrupt power or ground planes. The 17 x 17 mm package can create a demanding escape-routing problem around the perimeter, so complete escape routing before committing to component placement.

Separate the processor, FPGA core, I/O, and auxiliary supply requirements using the AMD recommended power architecture. Place required bulk and high-frequency decoupling capacitors at the associated supply balls, with the shortest practical connection from each capacitor to its device-side ground or supply via. Validate every rail's sequencing, voltage tolerance, startup behavior, and load-current margin against the exact XC7Z020 speed grade. Do not reuse the XC7Z010 power budget for the XC7Z020, because resource utilization and current requirements differ.

Estimate thermal performance across the full product envelope, including maximum processor utilization, FPGA activity, memory traffic, and sustained I/O loading. The L1 low-power designation should be considered during part selection, but it does not remove the need for a junction-temperature check. Use the manufacturer's power data and thermal model, provide adequate copper and thermal vias under the package, and evaluate the assembled board in its enclosure. Validate the highest expected ambient temperature rather than relying on a typical laboratory condition.

Do not treat a matching CLG400 package as proof that every XC7Z020 speed grade is interchangeable. The L1 and -1 suffixes can change timing and power characteristics, while the C and I suffixes change temperature coverage. Check the design's timing closure, clock constraints, processor power settings, thermal budget, and industrial-temperature requirements. When moving from XC7Z020 to XC7Z010, also confirm that the reduced logic and memory resources do not exceed the application's utilization targets.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The verified product information identifies an industrial temperature suffix and Zynq-7000 device class but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm the declarations for the exact MPN with AMD before making a compliance claim.

相关搜索

xc7z020 l1clg400i xc7z020 datasheet xc7z020 2clg400i datasheet xc7z020 1clg400i datasheet xc7z020 1clg400c xc7z020 1clg400i XC7Z020-L1CLG400I datasheet XC7Z020-L1CLG400I pinout XC7Z020-L1CLG400I replacement XC7Z020-L1CLG400I equivalent XC7Z020-L1CLG400I price XC7Z020-L1CLG400I stock AMD XC7Z020-L1CLG400I XC7Z020-L1CLG400I application circuit XC7Z020-L1CLG400I footprint

相关元器件 & 术语

AMD XC7Z020-L1CLG400I XC7Z020-1CLG400I XC7Z020-2CLG400I XC7Z020-1CLG400C XC7Z010-L1CLG400I XC7Z010-1CLG400I XA7Z010-1CLG400I Zynq-7000 Artix-7 ARM Cortex-A9 MPCore CoreSight system-on-chip SoC FPGA programmable logic embedded processor 85K logic cells 667 MHz 400-CSPBGA CLG400 package BGA surface mount industrial temperature grade L1 speed grade
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情