XC7Z020-L1CLG400I - 667MHz Zynq SoC FPGA | AMD
MPN: XC7Z020-L1CLG400I ✓ פעילXC7Z020-L1CLG400I סקירה
A Zynq-7000 SoC is a system-on-chip platform that integrates a hard processor subsystem with programmable FPGA logic. The ARM Cortex-A9 processor subsystem handles operating-system and application software, while the Artix-7 fabric accelerates parallel data processing, control logic, interfaces, and other time-critical functions. This combination reduces component count and simplifies communication between software and programmable hardware compared with separate processor and FPGA designs.
Key features include a dual ARM Cortex-A9 MPCore processor, CoreSight debugging, 85K logic cells, and a 667 MHz operating frequency. The L1 speed grade and industrial temperature suffix identify this as a low-power industrial-grade configuration. The CLG400 package provides 400 physical balls in a 17 x 17 mm CSPBGA footprint, allowing a large number of I/O and power connections on a compact board.
The device supports the Zynq-7000 family architecture, including programmable logic resources, hard processor functionality, dedicated memory interfaces, and integrated debug capabilities. This makes it suitable for designs requiring both sequential control and parallel hardware processing. The exact I/O count, memory capacity, power ratings, and detailed timing limits are not stated in the distributor summaries and should be taken from the AMD Zynq-7000 data sheet.
Typical applications include industrial automation, embedded control, communications equipment, test and measurement systems, image-processing front ends, and general-purpose embedded platforms. In these systems, the processor can run control software or an operating system while FPGA logic handles deterministic interfaces, signal conditioning, protocol conversion, or parallel data acquisition.
The 400-ball CSPBGA package requires careful PCB layout, including controlled-impedance routing, multiple power rails, adequate decoupling, and thermal management. Use the AMD Zynq-7000 package pinout files and the corresponding device data sheet when assigning power, ground, configuration, clock, and I/O balls; do not infer ball assignments from a generic BGA drawing.
This page organizes the verified product identity, package information, technical distinctions, drop-in alternatives, application context, and engineering guidance for engineers evaluating the XC7Z020-L1CLG400I. The most important selection checks are processor and FPGA resource compatibility, industrial temperature requirements, speed grade, package footprint, power sequencing, and toolchain support for the deployed Zynq design.
חלופות תחליף ישיר עבור XC7Z020-L1CLG400I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC7Z020-L1CLG400I (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Mounting Type, Package Dimensions, Processor Core, Temperature Grade.
XC7Z020-1CLG400I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7Z020-2CLG400I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7Z020-1CLG400C
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7Z010-L1CLG400I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XA7Z010-1CLG400I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC7Z020-L1CLG400I דירוגים מרביים ומאפיינים חשמליים
| Device Type | Zynq-7000 SoC FPGA |
| Processor | Dual ARM Cortex-A9 MPCore |
| Processor Maximum Frequency | 667 MHz |
| FPGA Family | Artix-7 |
| Logic Cells | 85K |
| Debug Support | CoreSight |
| מארז | 400-CSPBGA (17 x 17 mm) |
| Package Pin or Ball Count | 400 balls |
| סוג הרכבה | Surface Mount |
| Temperature Grade | Industrial |
| Speed Grade | L1 |
מדריך תצורת פינים של XC7Z020-L1CLG400I 400 balls
תצורת פינים עבור XC7Z020-L1CLG400I (מארזת 400 balls). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC7Z020-L1CLG400I.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC7Z020-L1CLG400I מתאים עבור 6 יישוםs: Industrial Automation Controller, Communications Gateway, Test and Measurement System, Image Processing Front End, Industrial Sensor Hub, Secure Embedded Platform.
Industrial Automation Controller
The AMD XC7Z020-L1CLG400I fits industrial automation controllers because it combines a dual ARM Cortex-A9 processor running at up to 667 MHz with an 85K-logic-cell Artix-7 fabric. Software can manage communications, configuration, and supervisory functions, while programmable logic handles deterministic machine timing and parallel I/O. The 400-CSPBGA package supplies a concentrated connection set for complex controllers, while the L1 low-power designation makes it a sensible starting point for power-constrained embedded equipment. Confirm the exact operating-temperature range, supply rails, power budget, and industrial qualification requirements in the AMD Zynq-7000 documentation before production release.
מומלץ
Communications Gateway
The XC7Z020-L1CLG400I is suitable for communications gateways that need protocol handling, network services, and hardware-accelerated datapaths in one package. The ARM Cortex-A9 subsystem can run networking or control software, while the Artix-7 fabric can implement parallel packet handling, custom serializers, or low-latency interface logic. Its 667 MHz processor performance and 85K logic cells provide a useful balance for edge gateways that must fit a compact board. Use the CLG400 package files to assign high-speed I/O, power, clocks, and configuration signals, and validate signal integrity with the complete PCB stack-up.
מומלץ
Test and Measurement System
The AMD XC7Z020-L1CLG400I can implement a mixed-signal test instrument by using the FPGA fabric for acquisition logic, timing control, and stimulus generation while the ARM subsystem handles instrument control, data preparation, and user-facing software. The 85K logic cells make the device relevant for moderate parallel-channel systems, while the processor simplifies control-flow and data-transfer tasks. The L1 low-power speed designation can benefit portable or rack-mounted systems, but total thermal design must include processor, FPGA, memory, and I/O activity. Derive power and junction-temperature limits from AMD data rather than estimating them from the 667 MHz frequency.
מומלץ
Image Processing Front End
The XC7Z020-L1CLG400I can serve as an image-processing front end when a design combines sensor-interface timing with higher-level processing. The Artix-7 fabric can implement parallel pixel pipelines, lookup tables, thresholding, or compression stages, while the dual ARM Cortex-A9 subsystem manages configuration and application-level tasks. This division supports streaming architectures that would otherwise require a separate processor and FPGA. The device's 667 MHz CPU rating and 85K logic-cell count should be matched to the actual channel count, pixel rate, and memory bandwidth. Validate memory interfaces and high-speed I/O against the exact package and timing constraints.
מומלץ
Industrial Sensor Hub
The XC7Z020-L1CLG400I is appropriate for an industrial sensor hub that must collect multiple inputs, perform local filtering, and present processed data through an embedded protocol stack. The FPGA fabric can implement sensor timing, digital filtering, diagnostics, and data packing, while the ARM Cortex-A9 processors handle configuration, logging, and network communication. The CLG400 package provides many package balls for power, clock, control, and mixed I/O assignments, and the L1 low-power grade is relevant where cooling or battery capacity is constrained. Confirm that every required interface and voltage rail is present in the exact CLG400 package and that the industrial temperature requirements are met.
מומלץ
Secure Embedded Platform
The XC7Z020-L1CLG400I can support secure embedded platforms where Linux-capable processor software must coexist with protected programmable logic and custom peripherals. The ARM subsystem can manage authentication, policy, and application services, while isolated FPGA logic can implement hardware-assisted security, secure I/O, or fixed-function data paths. CoreSight debug capability assists development and diagnostics, although production security still requires appropriate debug-access controls, boot protection, and key-management design. Because the verified information does not state the device's specific security features, use the AMD Zynq-7000 data sheet and device security documentation before making a compliance claim.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC7Z020-L1CLG400I — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC7Z020-1CLG400I | XC7Z020-2CLG400I | XC7Z020-1CLG400C | XC7Z010-L1CLG400I | XC7Z010-1CLG400I |
|---|---|---|---|---|---|---|
| Package | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Type | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA |
| Processor | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Speed Grade | L1 | -1 | -2 | -1 | L1 | -1 |
| Temperature Grade | Industrial | Industrial | Industrial | Commercial | Industrial | Industrial |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
מבדילים עיקריים
- Low-power L1 speed designation (לעומתXC7Z020-1CLG400I)
- Industrial temperature suffix (לעומתXC7Z020-1CLG400C)
- Full XC7Z020 resource class (לעומתXC7Z010-L1CLG400I)
הערות תכנון
Treat the CLG400 device as a complex BGA rather than a conventional peripheral. Use AMD's CLG400 package data to place all power, ground, configuration, clock, and I/O balls, and follow the recommended stack-up, via, solder-mask, and land-pattern guidance for the assembly process. Maintain continuous return paths beneath high-speed nets and avoid splits that disrupt power or ground planes. The 17 x 17 mm package can create a demanding escape-routing problem around the perimeter, so complete escape routing before committing to component placement.
Separate the processor, FPGA core, I/O, and auxiliary supply requirements using the AMD recommended power architecture. Place required bulk and high-frequency decoupling capacitors at the associated supply balls, with the shortest practical connection from each capacitor to its device-side ground or supply via. Validate every rail's sequencing, voltage tolerance, startup behavior, and load-current margin against the exact XC7Z020 speed grade. Do not reuse the XC7Z010 power budget for the XC7Z020, because resource utilization and current requirements differ.
Estimate thermal performance across the full product envelope, including maximum processor utilization, FPGA activity, memory traffic, and sustained I/O loading. The L1 low-power designation should be considered during part selection, but it does not remove the need for a junction-temperature check. Use the manufacturer's power data and thermal model, provide adequate copper and thermal vias under the package, and evaluate the assembled board in its enclosure. Validate the highest expected ambient temperature rather than relying on a typical laboratory condition.
Do not treat a matching CLG400 package as proof that every XC7Z020 speed grade is interchangeable. The L1 and -1 suffixes can change timing and power characteristics, while the C and I suffixes change temperature coverage. Check the design's timing closure, clock constraints, processor power settings, thermal budget, and industrial-temperature requirements. When moving from XC7Z020 to XC7Z010, also confirm that the reduced logic and memory resources do not exceed the application's utilization targets.
מידע על תאימות
The verified product information identifies an industrial temperature suffix and Zynq-7000 device class but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm the declarations for the exact MPN with AMD before making a compliance claim.