Zilog

Z86E2116PSC - 8-Bit 16MHz OTP Microcontroller | Zilog

MPN: Z86E2116PSC ✗ জীবনকালের সমাপ্তি
40-DIP Package 16 MHz Speed 8 KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

Z86E2116PSC সারাংশ

Zilog Z86E2116PSC is an 8-bit CMOS Z8 microcontroller with a 16 MHz operating frequency, 8 KB one-time-programmable memory, 236 bytes of RAM, and a 40-pin through-hole DIP package. The device provides 32 I/O lines, two 8-bit timers, and a UART communication interface for compact embedded-control designs.

A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripheral functions on one device. The Z86E2116PSC belongs to the Z8 family and operates as an embedded controller within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Its one-time-programmable architecture is intended for products where firmware is finalized during manufacturing and field programming is unnecessary.

The principal features include an 8-bit CPU operating at 12 MHz or 16 MHz, 8 KB of ROM or program memory, 236 bytes of RAM, 32 I/O pins, two 8-bit timer/counter blocks, and UART communications. These resources allow a designer to combine serial data handling, timed control functions, and discrete digital input and output within one integrated circuit.

The Z86E2116PSC is identified as a CMOS Z8 OTP microcontroller. Its 40-DIP construction supports conventional through-hole PCB assembly and prototyping, while the 0°C to 70°C operating range places it in the commercial temperature class. The 236-byte RAM and 32 available I/O lines provide practical working space for compact appliance controls, industrial automation equipment, and embedded peripheral controllers.

Typical uses include keypad and user-interface controllers, small motor-control boards, instrumentation peripherals, serial interface adapters, and simple industrial automation modules. The UART is particularly useful for connecting the controller to sensors, displays, data converters, or host systems, while the two timers support periodic measurement, timing, and output-control tasks.

PCB design should follow the manufacturer's 40-pin pin-description table and recommended decoupling guidance. Because the program memory is one-time programmable, firmware validation and device programming must be completed before the MCU enters the finished assembly. Prototype builds should also account for the through-hole footprint and commercial temperature limits rather than treating it as a modern fine-pitch surface-mount design.

This page combines the verified device identity, package information, memory configuration, timing characteristics, and interface details with practical application guidance. It also separates confirmed specifications from missing electrical and pin-level parameters so engineers can obtain the manufacturer datasheet before finalizing a high-voltage, timing-critical, or production-programming design.

এর জন্য ড্রপ-ইন বিকল্প Z86E2116PSC — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible Z86E2116PSC (একই form factor এবং footprint) — পার্থক্য রয়েছে Maximum Clock Frequency, Program Memory Organization, Program Memory Type.

Zilog
Maximum Clock Frequency: 12 MHz
Program Memory Organization: 8K x 8 bits
Program Memory Type: One-time programmable (OTP)
এর সাথে তুলনা করুন Z86E2116PSC →

Z86E2116PEC

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 40-DIP
Extended-temperature 40-DIP grade versus the 0°C to 70°C Z86E2116PSC; core speed, RAM, I/O count, and UART/USART remain equivalent.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

Z86E2114PSC

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 40-DIP
OTP program memory is 4 KB versus 8 KB (-50%); the 16 MHz operating class, 236-byte RAM, 32 I/O pins, and UART/USART remain compatible.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

Z86E2115PSC

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 40-DIP
OTP program memory is 6 KB versus 8 KB (-25%); the 40-DIP footprint, 16 MHz operating class, 236-byte RAM, 32 I/O pins, and UART/USART remain compatible.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

Z86E2112PSC

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Zilog
📦 40-DIP
8-bit CISC microcontroller · CISC · 12 MHz · One-time programmable (OTP) · 8 KB · 8K x 8 bits · 5 V · UART

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

Z86E2117PSC

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 40-DIP
Z86E2117-family device retains the 40-DIP footprint, 16 MHz operating class, 236-byte RAM, 32 I/O pins, and UART/USART, with program-memory capacity requiring firmware-size verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

Z86E2116PSC সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Device Type 8-bit CMOS microcontroller
Architecture Z8 core
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 16 MHz
Available Clock Speeds 12 MHz, 16 MHz
Program Memory 8 KB
Program Memory Organization 8K x 8
Program Memory Type One-time programmable
RAM 236 bytes
I/O Lines 32
Timers 2 x 8-bit
Communication Interface UART
প্যাকেজ 40-DIP
মাউন্টিং টাইপ Through-hole
অপারেটিং তাপমাত্রা 0°C to +70°C
Process Technology CMOS

Z86E2116PSC 40-dip পিন কনফিগারেশন গাইড

Z86E2116PSC (40-dip প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

Z86E2116PSC-এর জন্য 40-dip প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি Z86E2116PSC.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

Z86E2116PSC এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Small Industrial Automation Controller, UART-Based Serial Interface Adapter, Keypad and User-Interface Controller, Simple Motor and Timing Control, Instrumentation Data-Acquisition Front End, Appliance and Embedded Peripheral Control.

🏭

Small Industrial Automation Controller

The Z86E2116PSC fits a compact automation controller because its 8-bit Z8 core, 32 I/O lines, and two 8-bit timers can operate sensors, discrete actuators, and periodic control functions from one device. The UART can connect the controller to a host, operator interface, or remote supervisory system. Its confirmed 0°C to +70°C range suits commercial industrial environments, but the obsolete lifecycle status requires stock and longevity confirmation before production use.

🌐

UART-Based Serial Interface Adapter

The Z86E2116PSC can serve as a dedicated serial interface adapter when a product needs one UART and several digital control lines rather than a large processor. Its 16 MHz maximum clock supports responsive protocol handling, while 236 bytes of RAM accommodates packet buffers and state variables. The 32 I/O lines can also carry modem-control signals or discrete status indicators, making the OTP architecture suitable for production-programmed equipment.

🧩

Keypad and User-Interface Controller

The Z86E2116PSC is appropriate for a keypad or compact user-interface module because the 32 I/O lines can scan switches and drive indicators while the two timers support debouncing and periodic display updates. The 8 KB OTP program area can hold the complete user-interface routine, and the UART allows a main controller to receive commands or status. Firmware must be fully tested before OTP programming because field updates are not available.

🔧

Simple Motor and Timing Control

The two 8-bit timers in the Z86E2116PSC can support basic timing, counting, pulse generation, and periodic service tasks in a small motor or actuator controller. Its 32 I/O lines provide interface capacity for sensors, limit switches, drivers, and status lamps. Because the OTP program is permanent, deploy the device only after validating timing behavior and using conservative outputs with suitable protection for inductive or noisy loads.

📟

Instrumentation Data-Acquisition Front End

The Z86E2116PSC can collect discrete sensor inputs, perform timing and counting operations, and forward summarized measurements through its UART. Its 16 MHz Z8 core provides sufficient throughput for compact instrumentation that does not require high-resolution conversion or intensive signal processing. The 236-byte RAM supports short acquisition and buffering tasks, while the two timers can establish sampling intervals and timeout behavior for reliable data transfer.

⚡

Appliance and Embedded Peripheral Control

The Z86E2116PSC offers enough program memory, RAM, timers, UART capability, and I/O for appliance subcontrollers that coordinate buttons, indicators, sensors, and communication links. Its through-hole 40-DIP package is convenient for legacy-style control boards and straightforward prototyping. The commercial 0°C to +70°C range and OTP architecture fit mass-produced products, although obsolete lifecycle status makes procurement continuity a central design constraint.

What is the Z86E2116PSC?
The Z86E2116PSC is a Zilog Z8-family 8-bit CMOS microcontroller designed for embedded control applications. According to the Zilog product information, it operates at up to 16 MHz, provides 8 KB of one-time-programmable memory, includes 236 bytes of RAM, and is packaged in a 40-pin through-hole DIP. Its combination of UART communication, two 8-bit timers, and 32 I/O lines makes it suitable for compact control and peripheral-controller designs.
How much memory does the Z86E2116PSC have?
The Z86E2116PSC has 8 KB of one-time-programmable program memory, organized as 8K x 8, and 236 bytes of RAM. The Zilog datasheet information identifies the program memory as OTP, meaning the application firmware can be permanently programmed during production but cannot ordinarily be rewritten afterward. This makes thorough firmware validation essential before programming devices used in volume manufacturing.
What clock speed does the Z86E2116PSC use?
The Z86E2116PSC supports operation at 12 MHz or 16 MHz, with 16 MHz identified as its maximum frequency. According to the Zilog datasheet, the device uses an 8-bit Z8 processor architecture. Designers should use the manufacturer timing specifications when selecting oscillator components, setting bus timing, or calculating timeout intervals, because the confirmed data does not identify the permitted crystal or oscillator configurations.
What package and mounting style does Z86E2116PSC use?
The Z86E2116PSC is supplied in a 40-DIP package designed for through-hole mounting. The confirmed product information identifies both the 40-pin package and its through-hole construction, while another Zilog listing describes the device as a 40-DIP part. Use the manufacturer's pin-description table and land pattern when creating the PCB because individual signal assignments are not established by the product summary.
Where can I download the Z86E2116PSC datasheet PDF?
The Z86E2116PSC datasheet can be reached through the Zilog datasheet links listed on this page, including the DigiKey product entry and the DigChip specification page. According to the Zilog documentation, the principal device characteristics include a 16 MHz maximum clock, 8 KB of OTP memory, 236 bytes of RAM, 32 I/O lines, two 8-bit timers, and a UART. Confirm all pin, electrical, and timing details against the manufacturer document before layout release.
Where is the Z86E2116PSC pinout located?
The Z86E2116PSC pinout is located in the pin-description table of the Zilog datasheet and its associated product documentation. The confirmed package is a 40-pin DIP, but the individual pin numbers and signal names are not reproduced in the product summary. Use that table to assign power, oscillator, reset, I/O, timer, and UART connections rather than inferring a pinout from the 40-pin package outline.
Which peripherals are integrated into the Z86E2116PSC?
The Z86E2116PSC integrates 32 I/O lines, two 8-bit timer/counter blocks, and a UART communication interface. According to the Zilog datasheet information, these peripherals support digital control, periodic timing or counting, and serial data exchange. The 236-byte RAM provides working storage for the 8-bit core, while the 8 KB OTP area holds the permanent application program.
Is Z86E2116PSC suitable for industrial control applications?
The Z86E2116PSC can suit industrial automation and compact embedded-control applications that remain within its 0°C to +70°C commercial temperature range. Its 32 I/O lines support discrete sensors and actuators, its two timers support periodic tasks, and its UART provides a path to host systems or other controllers. For wider-temperature, safety-critical, or long-life industrial programs, verify the obsolete lifecycle position and consider a currently supported controller.
What is the best drop-in replacement for Z86E2116PSC?
The best drop-in replacement must use the same 40-DIP footprint, preserve pin-to-pin signal assignments, and match the 8-bit architecture, memory needs, timing, and peripheral resources. No uniquely verified same-package substitute was identified for the Z86E2116PSC, so a replacement should not be selected from a generic cross-reference listing alone. Treat the Zilog datasheet and PCB footprint as the acceptance criteria during any substitution review.
Can another Zilog microcontroller replace the Z86E2116PSC?
Another Zilog microcontroller can replace the Z86E2116PSC only if it provides a verified 40-DIP, pin-to-pin-compatible implementation with compatible power, oscillator, reset, I/O, timer, and UART connections. No candidate meeting those conditions was confirmed, and a related family member with a different package or suffix would not be a drop-in replacement. A redesign is more likely than a direct substitution for this legacy OTP device.
What can replace Z86E2116PSC in a legacy design?
A practical replacement for Z86E2116PSC may require a modern 8-bit MCU with equivalent I/O and peripheral functions plus a PCB adaptation if no pin-compatible 40-DIP part is found. Because the target uses one-time-programmable memory, a replacement using flash can simplify firmware updates, but firmware, clocking, interrupt, timer, and UART behavior must be migrated rather than assumed to match. Request a quote on this page for sourcing support and confirm availability before committing to a design.
When should I choose Z86E2116PSC instead of a modern microcontroller?
Choose the Z86E2116PSC only when maintaining an existing 40-DIP design, reproducing a proven legacy product, or matching an OTP-based manufacturing process is more important than obtaining current lifecycle support or flash-based firmware updates. Its 16 MHz Z8 core, 8 KB OTP memory, 236-byte RAM, UART, timers, and 32 I/O lines cover many embedded-control tasks, but an obsolete status and restricted temperature range limit new-design flexibility.
Is Z86E2116PSC suitable for a battery-powered device?
The Z86E2116PSC may be considered for a battery-powered device only after its supply-voltage range, active and standby current, oscillator start-up behavior, and peripheral leakage have been verified from the Zilog datasheet. Those electrical parameters are not confirmed here, so battery-life calculations cannot be completed responsibly. The device's 8-bit architecture and 16 MHz maximum clock can suit efficient control tasks, but low-power suitability depends on the specific operating mode and load.
Is Z86E2116PSC in stock and what is its lead time?
Current stock, order quantity, and manufacturer lead time for the Z86E2116PSC must be confirmed through the Request a Quote form on this page. The device is associated with an obsolete product listing, so production continuity should be checked carefully before a new build is scheduled. The visible product records do not establish a reliable quantity break, a stable allocation, or a guaranteed delivery window.
Where can I buy Z86E2116PSC online?
Use the Request a Quote form on this page to request the Z86E2116PSC with the required quantity, package, and production schedule. Because this is an older Zilog OTP microcontroller, buyers should request current availability, traceability, and lifecycle status rather than rely on a generic stock figure. Firmware programming and inspection requirements should also be agreed before placing a production order.
What is the price of Z86E2116PSC?
The current price of Z86E2116PSC is obtained through the Request a Quote form on this page. No qualifying exact-MPN quantity-break table was established, so no static unit price or price tier is published. For an obsolete-device quotation, include your annual and per-order quantities, required date code, inspection level, and programming requirements so the supplier can confirm the appropriate supply channel.
What are the key specifications of Z86E2116PSC engineers should know?
The key Z86E2116PSC specifications are an 8-bit Z8 core, 12 MHz or 16 MHz operation, 8 KB of one-time-programmable program memory, 236 bytes of RAM, 32 I/O lines, two 8-bit timers, a UART, and a 40-pin through-hole DIP package. According to the Zilog datasheet information, its commercial operating range is 0°C to +70°C. Supply voltage, absolute maximum ratings, and detailed pin functions must be confirmed before design release.
Is Z86E2116PSC the same as Z86E2116VEC or Z86E2116VSC?
The Z86E2116PSC should not be assumed to be interchangeable with Z86E2116VEC or Z86E2116VSC solely because their base numbers are related. Package, temperature, and ordering suffixes can change mechanical fit, electrical limits, or qualification, and the confirmed Z86E2116PSC configuration is a 40-DIP commercial-temperature device. Compare each pin, package drawing, supply range, and operating-temperature limit before treating another suffix as equivalent.
What programming method does Z86E2116PSC use?
The Z86E2116PSC uses one-time-programmable program memory for its 8 KB application program area. According to the Zilog device information, the program is stored as 8K x 8 OTP rather than rewritable flash. A production design should therefore include firmware verification and one-time programming steps that prevent defective firmware from entering the assembled product, while prototype programming requires a separate compatible programming process.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা Z86E2116PSC — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the Z86E2116PSC when reproducing or maintaining a proven legacy design that already depends on its 40-DIP footprint, Z8 firmware, OTP programming flow, and 16 MHz timing assumptions. Its 8 KB program memory, 236-byte RAM, 32 I/O lines, two timers, and UART are sufficient for compact control, timing, and serial-interface tasks. Do not choose it for a new design when current lifecycle availability, field firmware updates, wider temperature support, or a modern development ecosystem is important. No drop-in substitute was confirmed, so a migration to another MCU may require a PCB redesign and firmware port. Before ordering, verify supply voltage, pinout, oscillator configuration, programming procedure, and availability directly from the Zilog datasheet.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Brand Zilog
Package 40-DIP
Mounting Type Through-hole
Architecture Z8 8-bit core
Maximum Clock Frequency 16 MHz
Program Memory 8 KB OTP
RAM 236 bytes
I/O Lines 32
Timers 2 x 8-bit
Communication Interface UART
Operating Temperature 0°C to +70°C
Lifecycle Status Obsolete

মূল পার্থক্যসমূহ

  • Z8-specific 8-bit embedded-control architecture (বনামNo verified drop-in alternative)
  • Integrated legacy peripheral set (বনামNo verified drop-in alternative)
  • Permanent OTP programming model (বনামModern flash-based microcontrollers)

ডিজাইন নোট

Treat program development, validation, and production programming as a single controlled process. The 8 KB program memory is one-time programmable, so a firmware defect cannot be corrected by rewriting the MCU. Use a known-good development setup, compare programmed contents against the released firmware image, and define a manufacturer-supported programming and marking procedure before committing devices to a production line.

Design the PCB from the manufacturer's 40-pin DIP land pattern and pin-description table rather than from the package drawing alone. Preserve the through-hole lead spacing and pin-1 orientation, then verify every power, ground, oscillator, reset, I/O, timer, and UART connection against the datasheet. The confirmed summaries do not specify individual pin assignments, so an inferred 40-pin layout should not be released for fabrication.

Confirm the allowed supply-voltage range, absolute maximum ratings, input thresholds, output-drive capability, and current consumption before connecting external signals. The 16 MHz clock and 32 I/O lines do not establish the electrical limits of the device. Apply the manufacturer input thresholds when checking sensor compatibility and ensure any external interface cannot exceed the confirmed or verified logic voltage limits.

Place the required clock and bypass components close to their associated device pins according to the Zilog layout guidance. Keep the 40-DIP footprint accessible for programming and inspection, and route sensitive or long external connections away from the oscillator and switching nodes. If the UART connects to a cable or isolated environment, include the appropriate protection network rather than relying on the microcontroller's I/O pins alone.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit compliance declarations were established for this legacy Zilog device. The commercial 0°C to +70°C operating range does not by itself indicate AEC-Q100 qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-11 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

Z86E2116PSC datasheet Z86E2116PSC pinout Z86E2116PSC datasheet pdf Z86E2116PSC specifications Z86E2116PSC equivalent Z86E2116PSC replacement Z86E2116PSC cross reference Z86E2116PSC 40-DIP pinout Z86E2116PSC 16MHz microcontroller Zilog Z86E2116PSC Z86E2116PSC price Z86E2116PSC stock Z86E2116PSC application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Zilog Z86E2116PSC Z8 core Z8 microcontroller 8-bit microcontroller CMOS microcontroller one-time programmable memory OTP 8 KB program memory 236-byte RAM 16 MHz UART 8-bit timer 32 I/O lines 40-DIP through-hole mounting 0°C to +70°C embedded control industrial automation serial interface instrumentation RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন