Z86E2116PSC - 8-Bit 16MHz OTP Microcontroller | Zilog
MPN: Z86E2116PSC ✗ 停產Z86E2116PSC 概覽
A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripheral functions on one device. The Z86E2116PSC belongs to the Z8 family and operates as an embedded controller within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Its one-time-programmable architecture is intended for products where firmware is finalized during manufacturing and field programming is unnecessary.
The principal features include an 8-bit CPU operating at 12 MHz or 16 MHz, 8 KB of ROM or program memory, 236 bytes of RAM, 32 I/O pins, two 8-bit timer/counter blocks, and UART communications. These resources allow a designer to combine serial data handling, timed control functions, and discrete digital input and output within one integrated circuit.
The Z86E2116PSC is identified as a CMOS Z8 OTP microcontroller. Its 40-DIP construction supports conventional through-hole PCB assembly and prototyping, while the 0°C to 70°C operating range places it in the commercial temperature class. The 236-byte RAM and 32 available I/O lines provide practical working space for compact appliance controls, industrial automation equipment, and embedded peripheral controllers.
Typical uses include keypad and user-interface controllers, small motor-control boards, instrumentation peripherals, serial interface adapters, and simple industrial automation modules. The UART is particularly useful for connecting the controller to sensors, displays, data converters, or host systems, while the two timers support periodic measurement, timing, and output-control tasks.
PCB design should follow the manufacturer's 40-pin pin-description table and recommended decoupling guidance. Because the program memory is one-time programmable, firmware validation and device programming must be completed before the MCU enters the finished assembly. Prototype builds should also account for the through-hole footprint and commercial temperature limits rather than treating it as a modern fine-pitch surface-mount design.
This page combines the verified device identity, package information, memory configuration, timing characteristics, and interface details with practical application guidance. It also separates confirmed specifications from missing electrical and pin-level parameters so engineers can obtain the manufacturer datasheet before finalizing a high-voltage, timing-critical, or production-programming design.
直接替換替代品,適用於 Z86E2116PSC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: Z86E2116PSC (相同外形與佔位) — 差異在於 Maximum Clock Frequency, Program Memory Organization, Program Memory Type.
Z86E2116PEC
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
Z86E2114PSC
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
Z86E2115PSC
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
Z86E2112PSC
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →Z86E2117PSC
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
Z86E2116PSC 最大額定值與電氣特性
| Device Type | 8-bit CMOS microcontroller |
| Architecture | Z8 core |
| 最大時脈頻率 | 16 MHz |
| Available Clock Speeds | 12 MHz, 16 MHz |
| Program Memory | 8 KB |
| Program Memory Organization | 8K x 8 |
| Program Memory Type | One-time programmable |
| RAM | 236 bytes |
| I/O Lines | 32 |
| Timers | 2 x 8-bit |
| Communication Interface | UART |
| 封裝 | 40-DIP |
| 安裝類型 | Through-hole |
| 工作溫度 | 0°C to +70°C |
| Process Technology | CMOS |
Z86E2116PSC 40-dip 腳位配置指南
Z86E2116PSC(40-dip 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: Z86E2116PSC.
請參閱 資料表 以查看完整腳位配置。
典型應用
Z86E2116PSC 適用於 6 應用s: Small Industrial Automation Controller, UART-Based Serial Interface Adapter, Keypad and User-Interface Controller, Simple Motor and Timing Control, Instrumentation Data-Acquisition Front End, Appliance and Embedded Peripheral Control.
Small Industrial Automation Controller
The Z86E2116PSC fits a compact automation controller because its 8-bit Z8 core, 32 I/O lines, and two 8-bit timers can operate sensors, discrete actuators, and periodic control functions from one device. The UART can connect the controller to a host, operator interface, or remote supervisory system. Its confirmed 0°C to +70°C range suits commercial industrial environments, but the obsolete lifecycle status requires stock and longevity confirmation before production use.
推薦
UART-Based Serial Interface Adapter
The Z86E2116PSC can serve as a dedicated serial interface adapter when a product needs one UART and several digital control lines rather than a large processor. Its 16 MHz maximum clock supports responsive protocol handling, while 236 bytes of RAM accommodates packet buffers and state variables. The 32 I/O lines can also carry modem-control signals or discrete status indicators, making the OTP architecture suitable for production-programmed equipment.
推薦
Keypad and User-Interface Controller
The Z86E2116PSC is appropriate for a keypad or compact user-interface module because the 32 I/O lines can scan switches and drive indicators while the two timers support debouncing and periodic display updates. The 8 KB OTP program area can hold the complete user-interface routine, and the UART allows a main controller to receive commands or status. Firmware must be fully tested before OTP programming because field updates are not available.
推薦
Simple Motor and Timing Control
The two 8-bit timers in the Z86E2116PSC can support basic timing, counting, pulse generation, and periodic service tasks in a small motor or actuator controller. Its 32 I/O lines provide interface capacity for sensors, limit switches, drivers, and status lamps. Because the OTP program is permanent, deploy the device only after validating timing behavior and using conservative outputs with suitable protection for inductive or noisy loads.
推薦
Instrumentation Data-Acquisition Front End
The Z86E2116PSC can collect discrete sensor inputs, perform timing and counting operations, and forward summarized measurements through its UART. Its 16 MHz Z8 core provides sufficient throughput for compact instrumentation that does not require high-resolution conversion or intensive signal processing. The 236-byte RAM supports short acquisition and buffering tasks, while the two timers can establish sampling intervals and timeout behavior for reliable data transfer.
推薦
Appliance and Embedded Peripheral Control
The Z86E2116PSC offers enough program memory, RAM, timers, UART capability, and I/O for appliance subcontrollers that coordinate buttons, indicators, sensors, and communication links. Its through-hole 40-DIP package is convenient for legacy-style control boards and straightforward prototyping. The commercial 0°C to +70°C range and OTP architecture fit mass-produced products, although obsolete lifecycle status makes procurement continuity a central design constraint.
推薦
推薦產品摘要
工程參考資料,適用於 Z86E2116PSC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Zilog |
| Package | 40-DIP |
| Mounting Type | Through-hole |
| Architecture | Z8 8-bit core |
| Maximum Clock Frequency | 16 MHz |
| Program Memory | 8 KB OTP |
| RAM | 236 bytes |
| I/O Lines | 32 |
| Timers | 2 x 8-bit |
| Communication Interface | UART |
| Operating Temperature | 0°C to +70°C |
| Lifecycle Status | Obsolete |
主要差異化特點
- Z8-specific 8-bit embedded-control architecture (對比No verified drop-in alternative)
- Integrated legacy peripheral set (對比No verified drop-in alternative)
- Permanent OTP programming model (對比Modern flash-based microcontrollers)
設計說明
Treat program development, validation, and production programming as a single controlled process. The 8 KB program memory is one-time programmable, so a firmware defect cannot be corrected by rewriting the MCU. Use a known-good development setup, compare programmed contents against the released firmware image, and define a manufacturer-supported programming and marking procedure before committing devices to a production line.
Design the PCB from the manufacturer's 40-pin DIP land pattern and pin-description table rather than from the package drawing alone. Preserve the through-hole lead spacing and pin-1 orientation, then verify every power, ground, oscillator, reset, I/O, timer, and UART connection against the datasheet. The confirmed summaries do not specify individual pin assignments, so an inferred 40-pin layout should not be released for fabrication.
Confirm the allowed supply-voltage range, absolute maximum ratings, input thresholds, output-drive capability, and current consumption before connecting external signals. The 16 MHz clock and 32 I/O lines do not establish the electrical limits of the device. Apply the manufacturer input thresholds when checking sensor compatibility and ensure any external interface cannot exceed the confirmed or verified logic voltage limits.
Place the required clock and bypass components close to their associated device pins according to the Zilog layout guidance. Keep the 40-DIP footprint accessible for programming and inspection, and route sensitive or long external connections away from the oscillator and switching nodes. If the UART connects to a cable or isolated environment, include the appropriate protection network rather than relying on the microcontroller's I/O pins alone.
合規資訊
No explicit compliance declarations were established for this legacy Zilog device. The commercial 0°C to +70°C operating range does not by itself indicate AEC-Q100 qualification.