Z86E2116PSC - 8-Bit 16MHz OTP Microcontroller | Zilog
Référence : Z86E2116PSC ✗ Fin de vieZ86E2116PSC Présentation
A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripheral functions on one device. The Z86E2116PSC belongs to the Z8 family and operates as an embedded controller within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Its one-time-programmable architecture is intended for products where firmware is finalized during manufacturing and field programming is unnecessary.
The principal features include an 8-bit CPU operating at 12 MHz or 16 MHz, 8 KB of ROM or program memory, 236 bytes of RAM, 32 I/O pins, two 8-bit timer/counter blocks, and UART communications. These resources allow a designer to combine serial data handling, timed control functions, and discrete digital input and output within one integrated circuit.
The Z86E2116PSC is identified as a CMOS Z8 OTP microcontroller. Its 40-DIP construction supports conventional through-hole PCB assembly and prototyping, while the 0°C to 70°C operating range places it in the commercial temperature class. The 236-byte RAM and 32 available I/O lines provide practical working space for compact appliance controls, industrial automation equipment, and embedded peripheral controllers.
Typical uses include keypad and user-interface controllers, small motor-control boards, instrumentation peripherals, serial interface adapters, and simple industrial automation modules. The UART is particularly useful for connecting the controller to sensors, displays, data converters, or host systems, while the two timers support periodic measurement, timing, and output-control tasks.
PCB design should follow the manufacturer's 40-pin pin-description table and recommended decoupling guidance. Because the program memory is one-time programmable, firmware validation and device programming must be completed before the MCU enters the finished assembly. Prototype builds should also account for the through-hole footprint and commercial temperature limits rather than treating it as a modern fine-pitch surface-mount design.
This page combines the verified device identity, package information, memory configuration, timing characteristics, and interface details with practical application guidance. It also separates confirmed specifications from missing electrical and pin-level parameters so engineers can obtain the manufacturer datasheet before finalizing a high-voltage, timing-critical, or production-programming design.
Alternatives de remplacement direct pour Z86E2116PSC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec Z86E2116PSC (même facteur de forme et même empreinte) — différant par Maximum Clock Frequency, Program Memory Organization, Program Memory Type.
Z86E2116PEC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
Z86E2114PSC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
Z86E2115PSC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
Z86E2112PSC
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →Z86E2117PSC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
Z86E2116PSC Valeurs maximales et caractéristiques électriques
| Device Type | 8-bit CMOS microcontroller |
| Architecture | Z8 core |
| Fréquence d'horloge maximale | 16 MHz |
| Available Clock Speeds | 12 MHz, 16 MHz |
| Program Memory | 8 KB |
| Program Memory Organization | 8K x 8 |
| Program Memory Type | One-time programmable |
| RAM | 236 bytes |
| I/O Lines | 32 |
| Timers | 2 x 8-bit |
| Communication Interface | UART |
| Boîtier | 40-DIP |
| Type de montage | Through-hole |
| Température de fonctionnement | 0°C to +70°C |
| Process Technology | CMOS |
Guide de configuration des broches du Z86E2116PSC 40-dip
Configuration des broches du Z86E2116PSC (boîtier 40-dip). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour Z86E2116PSC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
Z86E2116PSC convient pour 6 applications: Small Industrial Automation Controller, UART-Based Serial Interface Adapter, Keypad and User-Interface Controller, Simple Motor and Timing Control, Instrumentation Data-Acquisition Front End, Appliance and Embedded Peripheral Control.
Small Industrial Automation Controller
The Z86E2116PSC fits a compact automation controller because its 8-bit Z8 core, 32 I/O lines, and two 8-bit timers can operate sensors, discrete actuators, and periodic control functions from one device. The UART can connect the controller to a host, operator interface, or remote supervisory system. Its confirmed 0°C to +70°C range suits commercial industrial environments, but the obsolete lifecycle status requires stock and longevity confirmation before production use.
Recommandé
UART-Based Serial Interface Adapter
The Z86E2116PSC can serve as a dedicated serial interface adapter when a product needs one UART and several digital control lines rather than a large processor. Its 16 MHz maximum clock supports responsive protocol handling, while 236 bytes of RAM accommodates packet buffers and state variables. The 32 I/O lines can also carry modem-control signals or discrete status indicators, making the OTP architecture suitable for production-programmed equipment.
Recommandé
Keypad and User-Interface Controller
The Z86E2116PSC is appropriate for a keypad or compact user-interface module because the 32 I/O lines can scan switches and drive indicators while the two timers support debouncing and periodic display updates. The 8 KB OTP program area can hold the complete user-interface routine, and the UART allows a main controller to receive commands or status. Firmware must be fully tested before OTP programming because field updates are not available.
Recommandé
Simple Motor and Timing Control
The two 8-bit timers in the Z86E2116PSC can support basic timing, counting, pulse generation, and periodic service tasks in a small motor or actuator controller. Its 32 I/O lines provide interface capacity for sensors, limit switches, drivers, and status lamps. Because the OTP program is permanent, deploy the device only after validating timing behavior and using conservative outputs with suitable protection for inductive or noisy loads.
Recommandé
Instrumentation Data-Acquisition Front End
The Z86E2116PSC can collect discrete sensor inputs, perform timing and counting operations, and forward summarized measurements through its UART. Its 16 MHz Z8 core provides sufficient throughput for compact instrumentation that does not require high-resolution conversion or intensive signal processing. The 236-byte RAM supports short acquisition and buffering tasks, while the two timers can establish sampling intervals and timeout behavior for reliable data transfer.
Recommandé
Appliance and Embedded Peripheral Control
The Z86E2116PSC offers enough program memory, RAM, timers, UART capability, and I/O for appliance subcontrollers that coordinate buttons, indicators, sensors, and communication links. Its through-hole 40-DIP package is convenient for legacy-style control boards and straightforward prototyping. The commercial 0°C to +70°C range and OTP architecture fit mass-produced products, although obsolete lifecycle status makes procurement continuity a central design constraint.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour Z86E2116PSC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Zilog |
| Package | 40-DIP |
| Mounting Type | Through-hole |
| Architecture | Z8 8-bit core |
| Maximum Clock Frequency | 16 MHz |
| Program Memory | 8 KB OTP |
| RAM | 236 bytes |
| I/O Lines | 32 |
| Timers | 2 x 8-bit |
| Communication Interface | UART |
| Operating Temperature | 0°C to +70°C |
| Lifecycle Status | Obsolete |
Principaux différenciateurs
- Z8-specific 8-bit embedded-control architecture (vs No verified drop-in alternative)
- Integrated legacy peripheral set (vs No verified drop-in alternative)
- Permanent OTP programming model (vs Modern flash-based microcontrollers)
Notes de conception
Treat program development, validation, and production programming as a single controlled process. The 8 KB program memory is one-time programmable, so a firmware defect cannot be corrected by rewriting the MCU. Use a known-good development setup, compare programmed contents against the released firmware image, and define a manufacturer-supported programming and marking procedure before committing devices to a production line.
Design the PCB from the manufacturer's 40-pin DIP land pattern and pin-description table rather than from the package drawing alone. Preserve the through-hole lead spacing and pin-1 orientation, then verify every power, ground, oscillator, reset, I/O, timer, and UART connection against the datasheet. The confirmed summaries do not specify individual pin assignments, so an inferred 40-pin layout should not be released for fabrication.
Confirm the allowed supply-voltage range, absolute maximum ratings, input thresholds, output-drive capability, and current consumption before connecting external signals. The 16 MHz clock and 32 I/O lines do not establish the electrical limits of the device. Apply the manufacturer input thresholds when checking sensor compatibility and ensure any external interface cannot exceed the confirmed or verified logic voltage limits.
Place the required clock and bypass components close to their associated device pins according to the Zilog layout guidance. Keep the 40-DIP footprint accessible for programming and inspection, and route sensitive or long external connections away from the oscillator and switching nodes. If the UART connects to a cable or isolated environment, include the appropriate protection network rather than relying on the microcontroller's I/O pins alone.
Informations de conformité
No explicit compliance declarations were established for this legacy Zilog device. The commercial 0°C to +70°C operating range does not by itself indicate AEC-Q100 qualification.