DSP
Products (962)
DSPIC33EP256GP504T-E/PT - 16-bit DSC 60 MIPS AEC-Q100 | Microchip
The Microchip Technology DSPIC33EP256GP504T-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP general purpose family, delivering 60 MIPS core performance with 256 KB (85.5K x 24) of FLASH program memory, 32 KB of RAM, and an extended operating temperature range of -40C to +125C in a 44-pin TQFP (10x10 mm) package. It is AEC-Q100 qualified for automotive applications. A digital signal controller combines the computational architecture of a microcontroller with DSP-grade multiply-accumulate hardware. In the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs, offering deterministic control loops, rich peripherals, and single-cycle MAC operations. The dsPIC33EP family is Microchip's 16-bit DSC platform for real-time control, motor drives, and digital power conversion. Key features of the DSPIC33EP256GP504 include the 16-bit dsPIC33E CPU core running at up to 70 MIPS family-class performance (this -E/PT variant is specified at 60 MIPS per distributor listings), a high-performance 12-bit ADC module with up to 4 Msps sampling capability, enhanced CAN 2.0B communication, a Charge Time Measurement Unit (CTMU) for capacitive touch and time measurement, a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing, and high-speed PWM outputs suited to motor control and digital power topologies. Architecturally, the device pairs a 24-bit instruction word pipeline with two 40-bit accumulators and hardware DSP multiply-accumulate instructions, allowing deterministic execution of control algorithms such as field-oriented control (FOC), PI regulation, and power-factor-correction loops. The 256 KB FLASH supports self-programming, and the 32 KB RAM provides headroom for buffering, communication stacks, and algorithm state. Operating from a 3.3V supply, the family datasheet DS70000657J covers the dsPIC33EPXXXGP50X group. Typical applications include automotive body and powertrain auxiliary control, brushless DC and PMSM motor drives, digital power supplies and LED drivers, industrial automation nodes with CAN connectivity, and sensor signal conditioning using the CTMU and 12-bit ADC. Design consideration: this T suffix denotes tape-and-reel packaging for automated assembly, and the E temperature code supports -40C to +125C operation; verify maximum current budget against ambient temperature derating on the 3.3V rail. This page adds value beyond the manufacturer datasheet by consolidating drop-in same-footprint alternatives, pricing tiers, AEO-optimized engineering FAQs, and practical design notes synthesized from distributor and manufacturer sources.
DSPIC33EP256GP504T-I/PT - 16-bit 70 MIPS DSC 256KB Flash TQFP-44 | Microchip
The Microchip Technology DSPIC33EP256GP504T-I/PT is a 16-bit dsPIC33EP general-purpose digital signal controller (DSC) delivering up to 70 MIPS performance, 256 KB (85.5K x 24) of FLASH program memory and 32 KB of RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package operating from a 3.3 V supply over the industrial -40C to +85C temperature range. A digital signal controller combines the deterministic control of a microcontroller with the math acceleration of a DSP. In the power-management hierarchy, the dsPIC33E family sits above entry-level PIC16/PIC18 MCUs and below 32-bit application processors, targeting real-time embedded control loops where fast multiply-accumulate operations, precise analog sampling and deterministic interrupts are required in a single chip. Key features of the DSPIC33EP256GP504 include the highest-speed 70 MIPS dsPIC33E core with excellent code density, superior ADC performance, enhanced CAN communication, a Charge Time Measurement Unit (CTMU), integrated operational amplifiers and a Peripheral Trigger Generator (PTG) that automates ADC/DSP task sequencing without CPU intervention. Distributor listings also characterize the device as a 60 MHz-clock 44-pin part with OpAmps, comparators, PTG and CAN, confirming the rich mixed-signal peripheral set. Architecturally, the 16-bit pipeline executes DSP instructions such as MAC and dual-fetch operations while retaining C-friendly MCU peripherals, allowing a single designer to close motor-control or power-conversion loops at kilohertz-to-hundreds-of-kilohertz rates with hardware PWM and the CTMU for precise capacitive timing. Typical applications include digital power supplies and power-factor-correction converters, brushless DC and PMSM motor control, CAN-based industrial and automotive body nodes, and general-purpose sensing systems that exploit the on-chip op amps and comparators to reduce external component count. Design consideration: keep the 3.3 V supply decoupled with low-ESR ceramics at every VDD/VSS pair and verify that the 70 MIPS core clock configuration (PLL settings from the 60 MHz-class clock source listed by distributors) matches your crystal choice before committing the PCB. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
DSPIC33EP256GP506-E/MR - 16-bit 60MIPS DSC, 256KB Flash | Microchip
The Microchip Technology DSPIC33EP256GP506-E/MR is a 16-bit dsPIC33EP Digital Signal Controller (DSC) delivering up to 60 MIPS (85.5K x 24 instruction words) from 256KB of Flash program memory with 32KB of RAM, housed in a 64-pin VQFN (9x9 mm) package rated for -40C to +125C automotive environments. A Digital Signal Controller combines the periphery of a microcontroller (GPIO, timers, UART, SPI, I2C, CAN) with DSP-class math capability (single-cycle MAC, DSP instruction set, dual operand fetch) in a single chip. Within the power-management hierarchy of embedded systems, a DSC sits above a general-purpose MCU and below a full DSP-plus-MCU two-chip solution, making it well suited for control loops that need both fast math and rich peripherals. Key features include the 16-bit dsPIC33E CPU running at 60 MIPS, 256KB Flash, 32KB RAM, integrated CAN 2.0B for automotive and industrial networks, on-chip operational amplifiers and analog comparators, and the Peripheral Trigger Generator (PTG) for autonomous peripheral coordination. The -E temperature grade qualifies the part for -40C to +125C operation, and DigiKey lists the family line under AEC-Q100 automotive categories. Architecturally, the dsPIC33EP core uses an enhanced Harvard pipeline with a 17-bit x 17-bit hardware multiplier and 40-bit accumulator, enabling efficient filter and transform algorithms such as FOC motor control loops and digital power compensation. Typical applications include automotive body and powertrain-adjacent control nodes, industrial motor drives, digital power supplies, and CAN-networked sensor fusion modules. Design consideration: provide clean 3.3V rail decoupling at all VDD/VSS pin pairs and use the hardware CAN module with an external transceiver; watch Flash endurance and erase limits in data-logging designs. This page synthesizes distributor pricing context, drop-in alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.
DSPIC33EP256GP506-I/PT - 16-bit DSC 70MIPS 256KB Flash TQFP-64 | Microchip
The Microchip Technology DSPIC33EP256GP506-I/PT is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS at 3.6V, with 256 KB of flash program memory, 32 KB of RAM, and 53 general-purpose I/O pins, housed in a 64-pin TQFP (10x10 mm) package. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP core. In the power-management hierarchy, a DSC sits above general-purpose MCUs and below application processors, making it the preferred choice for closed-loop control systems such as digital power converters and motor drives where fast multiply-accumulate operations and precise PWM generation are mandatory. Key features of the DSPIC33EP256GP506 include the dsPIC33E CPU core with DSP engine, dual ECAN modules, three I2C peripherals, up to three SPI and four UART ports, a 10/12-bit ADC with high-speed conversion capability, and Peripheral Pin Select (PPS) that remaps digital peripherals onto flexible RPn pins. Industrial-grade operation spans -40C to +85C (the -I temperature suffix). Architecturally, the device executes from flash at up to 70 MIPS using a pipelined 16-bit core with hardware DSP instructions, barrel shifter, and 40-bit accumulators. Working in the low-voltage 1.8V-to-3.6V range, the core integrates a fast RC oscillator, PLL, and watchdog for clock resilience, and supports in-circuit programming/debugging via ICSP with PICkit and ICD tools. Typical applications include switch-mode power supplies and digital lighting (using the complementary MC-series high-speed PWM parts), sensorless BLDC/PMSM motor control, industrial automation gateways leveraging dual CAN buses, and general-purpose embedded control requiring DSP filtering. Design consideration: budget decoupling (0.1 uF per VDD pin plus bulk capacitance) and honor the datasheet power-up sequence; PPS mapping must be configured in firmware before peripherals are enabled. This page synthesizes distributor stock data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
DSPIC33EP256MC202-H/SO - 16-bit 70 MIPS DSC 256KB Flash | Microchip
The Microchip Technology DSPIC33EP256MC202-H/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance with 256 KB of Flash program memory and 32 KB of SRAM in a 28-pin SOIC package rated for -40C to +125C operation. A digital signal controller combines the computational throughput of a DSP engine with the deterministic control and peripheral integration of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and application-specific DSPs, making it the natural choice for closed-loop control systems such as field-oriented motor control, digital power conversion, and sensor fusion where both fast math and flexible I/O are required. Key features of the dsPIC33EP256MC202 include the 70 MIPS dsPIC33E core with DSP multiply-accumulate instructions, high-speed PWM modules purpose-built for motor control, a 12-bit ADC configurable at 10-bit 1.1 Msps or 12-bit 500 ksps with multiple sample-and-hold circuits, and up to three op-amp/comparator peripherals with direct ADC connections. These analog and control blocks reduce external component count and loop latency in precision drive applications. Architecturally, the device belongs to the dsPIC33EPXXXMC20X family documented in the Microchip family data sheet (DS70000657), with 85.5K x 24 Flash words, flexible peripheral pin select (PPS) for RP-pin remapping, and multiple PGEC/PGED pairs supporting In-Circuit Serial Programming (ICSP) debugging with tools such as NSDSP and MPLAB ICD. The -H suffix denotes the -40C to +125C temperature range variant. Typical applications include brushless DC and PMSM motor drives, digital SMPS and power-factor-correction converters, and industrial automation sensors. The 70 MIPS core executes field-oriented control inner loops comfortably, while the high-resolution PWM supports dead-time-critical topologies. A key design consideration: use any PGEC/PGED pair as a matched pair for ICSP, and connect all VDD/VSS pins as specified in the family data sheet. This page synthesizes distributor pricing, drop-in alternatives, pinout, and practical design notes not found in the manufacturer datasheet alone.
DSPIC33EP256MC202-H/SP - 70MIPS 16-bit DSC 256KB Flash | Microchip
The Microchip Technology DSPIC33EP256MC202-H/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance from a 256 KB (256K x 16) flash program memory, 32 KB SRAM, and a 3.3 V supply, housed in a 28-pin SPDIP through-hole package. A digital signal controller combines the computational horsepower of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits above a general-purpose MCU and below a full application processor: the dsPIC33E core is a Harvard-architecture, 16-bit pipelined engine with DSP multiply-accumulate (MAC) instructions, making it a natural single-chip choice for closed-loop control systems where sensors are sampled, control algorithms execute, and power stages are driven without external signal-processing ICs. Key features of the dsPIC33EP256MC202 include the 70 MIPS dsPIC DSC core with integrated DSP engine, high-speed PWM peripherals tailored for motor control, advanced analog peripherals, and the 256 KB self-programmable flash that gives ample headroom for field-updatable firmware. The MC (motor control) variant is specifically architected for precision motor control, providing the peripheral set Microchip positions for sensorless BLDC, PMSM, and ACIM drives. Technically, the dsPIC33EP core executes most instructions in a single cycle and includes hardware division, 17-bit x 17-bit single-cycle MAC, and dual address generation units for DSP kernels such as FIR filters, PID loops, and Clarke/Park transforms. Code and data buses are separate (Harvard architecture), enabling simultaneous instruction fetch and operand access, which is what allows the 16-bit core to reach 70 MIPS at modest clock frequencies and low power. Typical applications include brushless DC and permanent-magnet synchronous motor drives, digital power supplies (PFC, LLC), solar inverters, and industrial sensing and control nodes that previously required a separate MCU plus DSP. When designing with this device, connect all VDD/VSS pairs, fit the internal regulator VCAP capacitor per the datasheet, and use any PGECx/PGEDx pair consistently for ICSP programming, as both members of the pair must be wired to the programmer. This page synthesizes distributor pricing context, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.
DSPIC33EP256MC202-I/MM - 70 MIPS 16-bit DSC QFN-28 | Microchip
The Microchip Technology DSPIC33EP256MC202-I/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring a 70 MIPS dsPIC DSC core, 256 KB (85.5K x 24) of FLASH program memory, and 32 KB of SRAM, housed in a 28-pin QFN-S (6x6 mm) surface-mount package. A digital signal controller combines the computational power of a digital signal processor with the deterministic control architecture of a microcontroller. Within the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs, making it the standard choice for closed-loop power conversion and motion systems where fast math execution and rich analog peripherals must coexist on one chip. Key features include high-speed motor-control PWM peripherals with complementary outputs and dead-time control, on-chip op-amps for current-sense amplification, and advanced analog with multiple 10-bit/12-bit ADC converters supporting simultaneous sampling. DMA channels offload the CPU during high-rate ADC conversions, and the 70 MIPS core executes DSP multiply-accumulate instructions in a single cycle, which is essential for field-oriented control (FOC) and digital filtering. The dsPIC33EP architecture uses an enhanced modified Harvard pipeline with a 60 MHz internal clock rate (Mouser lists 60 MHz operating frequency), 3.0 V to 3.6 V supply operation, and an industrial temperature range of -40C to +85C for the -I suffix. Programming and debugging are handled through ICSP using any PGECx/PGEDx pair, with full support for the MPLAB X IDE and MPLAB ICD/REAL ICE toolchains. Typical applications include precision motor control (BLDC, PMSM, FOC), digital power supplies (LLC, PFC, buck), solar micro-inverters, battery chargers, and industrial sensing nodes that combine control loops with analog measurement. Design consideration: place the VCAP stabilization capacitor exactly as specified in the Microchip datasheet DS70000657J, and connect all VDD/VSS pairs; the regulator output capacitor is critical for startup reliability. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.
DSPIC33EP256MC202-I/SO - 16-bit 70 MIPS DSC 256KB Flash | Microchip
The Microchip Technology DSPIC33EP256MC202-I/SO is a 16-bit Digital Signal Controller (DSC) delivering up to 70 MIPS from its dsPIC33E core, with 256KB (85.5K x 24) of Flash program memory and 32KB of SRAM, housed in a 28-pin SOIC (SO) package rated for industrial temperatures (-40C to +85C). A Digital Signal Controller combines the deterministic control architecture of a microcontroller with the math acceleration of a DSP engine. Within Microchip's product hierarchy, the dsPIC33EP family sits between 16-bit PIC24 microcontrollers and dedicated DSPs, integrating a high-speed PWM module, QEI quadrature encoder interface, analog comparators, and op-amps on a single chip. This makes the category the workhorse of precision embedded motor control and power conversion. Key differentiating features of this part include the 70 MIPS core with DSP multiply-accumulate instructions, a dedicated Motor Control PWM (MCPWM) module for complementary outputs with dead-time insertion, an integrated quadrature encoder interface for closed-loop servo feedback, and on-chip analog blocks that reduce external component count. The EP generation is fabricated on a 90nm flash process supporting 3V to 3.6V operation, with internal PLL options allowing clock multiplication from an external crystal or internal FRC oscillator up to 60 MHz (70 MIPS rated). Multiple interrupt priority levels, DMA support, and two PGEC/PGED in-circuit serial programming pairs simplify real-time firmware design and ICSP/ICD debugging via standard Microchip tools such as PICkit and ICD hardware. Typical applications include brushless DC and PMSM motor drives, digital power supplies (PFC, LLC), solar inverters, industrial automation sensors, and automotive subsystems (an extended-temperature E/ variant exists for that market). The high DSP throughput suits control loops running at 20-50 kHz PWM frequencies. Design consideration: the dsPIC33EP requires a VCAP/VDDCORE capacitor on its dedicated core-regulator pin; omitting or misplacing this low-ESR 10uF-class capacitor is the most common bring-up failure. All VDD/VSS pairs must be decoupled. This page synthesizes distributor pricing context, pin-compatible drop-in alternatives across the dsPIC33EP256MC202 family, and practical design notes not found in the manufacturer datasheet alone.
DSPIC33EP256MC206T-E/PT - 16-bit 60 MIPS DSC | Microchip
The Microchip Technology DSPIC33EP256MC206T-E/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS performance with 256 KB (85.5K x 24) of FLASH program memory and 32 KB of RAM, housed in a 64-pin TQFP (10x10 mm) package with extended -40C to +125C temperature rating and AEC-Q100 automotive qualification. A digital signal controller combines the computational power of a DSP with the peripheral integration and ease of use of a microcontroller, sitting in the system hierarchy between general-purpose MCUs and dedicated DSP processors. The dsPIC33E family belongs to Microchip's 16-bit embedded control portfolio and is targeted specifically at precision digital power conversion and motor control, where fast multiply-accumulate operations and specialized PWM hardware are mandatory. Key features include dedicated Motor Control PWM (MCPWM) modules with complementary outputs and dead-time control, quadrature encoder interface (QEI) inputs for rotor position feedback, three integrated operational amplifiers, four analog comparators, and a configurable logic element block (PTG). Four direct memory access (DMA) channels offload the CPU, and five timers support complex sequencing tasks. Architecturally, the device executes the dsPIC33E enhanced instruction set with hardware DSP multiply, multiply-accumulate, and modulo addressing, allowing FOC (field-oriented control) loops to run efficiently at 60 MHz. Program memory is organized as 85.5K x 24-bit instruction words, and core power is supplied through an internal regulator requiring only a VCAP capacitor. Typical applications include brushless DC and PMSM motor drives, digital power supplies, solar inverters, and automotive auxiliary motor controllers, where the MCPWM, QEI, and on-chip analog reduce external component count. Design consideration: the 3.3V supply must be decoupled at every VDD pin and the VCAP pin requires the datasheet-specified low-ESR capacitor for stable core regulation; the /PT tape-and-reel suffix is for automated assembly. This page synthesizes distributor stock data, drop-in same-footprint alternatives, and application-specific design guidance not found in the manufacturer datasheet alone.
DSPIC33EP256MC206T-I/PT - 16-Bit 70 MIPS DSC 256KB | Microchip
The Microchip Technology DSPIC33EP256MC206T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring a 70 MIPS dsPIC DSC core, 256KB (85.5K x 24) FLASH program memory, and 32KB RAM, housed in a 64-pin TQFP (10x10 mm) package operating from a 3.3V supply. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral integration and deterministic control behavior of a microcontroller. Within the power-management hierarchy of an embedded system, the DSC sits at the supervisory and control layer, directly driving power conversion and motor-control stages. The dsPIC33EP family belongs to Microchip's broader 16-bit embedded control portfolio, which spans PIC24 microcontrollers and dsPIC digital signal controllers sharing a common core and development ecosystem. Key differentiating features include the 70 MIPS modified Harvard DSP core with single-cycle MAC and 40-bit accumulator, integrated high-speed PWM modules for motor control, quadrature encoder interface (QEI) inputs for position feedback, on-chip operational amplifiers and comparators for current-sense signal chains, and industrial temperature coverage from -40C to +85C denoted by the -I suffix. Architecturally, the dsPIC33EP core uses a pipelined 16-bit instruction set with DSP engine extensions, enabling precision and energy-efficient motor control designs as described by Microchip. The MCPWM peripheral set generates complementary, dead-time-inserted PWM outputs essential for driving three-phase inverter bridges, while the QEI hardware decodes encoder signals without CPU overhead. Fast ADCs synchronized to the PWM cycle complete the closed-loop control datapath. Typical applications include brushless DC and permanent-magnet synchronous motor drives, power factor correction and solar inverter control, and digital power supplies such as LLC and half-bridge converters. Integrated op-amps reduce external component count in current-sensing front ends. A key design consideration: connect all VDD and VSS pin pairs, as omitting any supply pin can cause programming to fail; the VCAP pin requires a low-ESR capacitor for the internal 2.5V regulator per Microchip guidance. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found on the manufacturer product page alone.
DSPIC33EP256MC502-E/MM - 60MIPS 16-bit DSC 256KB Flash | Microchip
The Microchip Technology DSPIC33EP256MC502-E/MM is a 16-bit digital signal controller (DSC) delivering 60 MIPS performance from 256KB (85.5K x 24) of Flash program memory and 32KB of RAM, housed in a 28-pin QFN-S (6x6 mm) package with extended temperature operation from -40C to +125C. A digital signal controller combines the computational throughput of a DSP engine with the deterministic control architecture and peripheral set of a microcontroller. Within the power management hierarchy, the dsPIC33E family sits between general-purpose MCUs and dedicated DSPs, making it the de-facto standard for embedded motor control and digitally controlled power conversion where single-cycle multiply-accumulate (MAC) instructions and fast interrupt response are required. Key features include the 16-bit dsPIC33E core running at 60 MIPS, 256KB Flash with self-programming support, MCPWM (motor control PWM) peripherals with complementary outputs and dead-time insertion, quadrature encoder interface (QEI) inputs, integrated operational amplifiers, analog comparators, CAN 2.0B for industrial networking, and a reconfigurable peripheral generator (PTG). The -E suffix denotes extended temperature grade (-40C to +125C), enabling enclosed motor-drive environments. Architecturally, the dsPIC33EP core pairs a 16-bit modified Harvard pipeline with a dedicated DSP multiply-accumulate unit, dual operand fetch, and modulo/bit-reversed addressing for FFT-class algorithms. High-speed ADC sampling synchronized to PWM triggers minimizes control-loop latency in field-oriented control (FOC) implementations, while hardware DMA offloads the CPU during high-rate data movement. Typical applications include brushless DC and PMSM motor drives, digital power supplies (LLC, PFC, buck converters), solar inverters, and industrial automation nodes using CAN connectivity. The rich analog front-end (op amps, comparators) reduces external component count in current-sense chains. When designing, budget the 28-pin I/O carefully: pin-multiplexed RPn remappable pins let you route PWM, UART, SPI, and I2C to available pads, but plan them in firmware before PCB layout to avoid conflicts. Verify peripheral assignments against the family reference manual. This page synthesizes distributor pricing context, same-footprint drop-in alternatives within the dsPIC33EP family, and practical design notes not consolidated in the manufacturer datasheet.
DSPIC33EP256MC502-E/SO - 16-bit 60 MIPS DSC 256KB Flash | Microchip
The Microchip Technology DSPIC33EP256MC502-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance with 256KB (85.5K x 24) of Flash program memory, 32KB of SRAM, and high-speed PWM with advanced analog integration, housed in a 28-pin SOIC (wide 7.50 mm) package rated from -40C to +125C. A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a DSP. Within the power management hierarchy of embedded systems, a DSC such as the dsPIC33EP256MC502 sits between a general-purpose MCU and a dedicated DSP, providing deterministic single-cycle MAC (multiply-accumulate) instructions plus the peripherals needed for closed-loop control. Key features include the 16-bit dsPIC DSC core with DSP engine, up to 70 MIPS capability in the family (60 MHz operation for this part), high-resolution PWM modules suited to motor control, integrated operational amplifiers and high-speed 10/12-bit ADCs, plus standard serial interfaces (UART, SPI, I2C). The E-grade temperature rating of -40C to +125C and AEC-Q100 qualification reported by distributors make it suitable for harsh automotive and industrial environments. Architecturally, the device uses an enhanced Harvard pipeline with 24-bit instruction words, hardware looping and bit-reversed addressing for FFT-class algorithms, and multiple interrupt vector tables for deterministic real-time response. Flash self-programming supports field firmware updates. Typical applications include precision motor control (BLDC, PMSM, ACIM with field-oriented control), digital power supplies and inverters, and sensor signal conditioning where the on-chip op amps and ADC close analog loops without external components. Design consideration: the VCAP/VDDCORE pin requires an external low-ESR capacitor (per the manufacturer datasheet) for the internal core regulator; omitting it prevents reliable startup. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.
DSPIC33EP256MC504-E/MV - 16-bit 60 MIPS DSC 256KB | Microchip
The Microchip Technology DSPIC33EP256MC504-E/MV is a 16-bit digital signal controller (DSC) delivering up to 60 MIPS from 256KB (85.5K x 24) of Flash program memory and 32KB of RAM, housed in a 48-pin UQFN (6x6 mm) package with extended temperature range of -40C to +125C. A digital signal controller combines the computational architecture of a microcontroller with the math-acceleration of a digital signal processor. In the power-management IC hierarchy, a DSC such as the dsPIC33EP family sits at the center of embedded motor control systems, executing a real-time control loop (PID, field-oriented control) alongside general firmware tasks. The dsPIC33EP family is Microchip's 16-bit flash-based DSC line, part of the broader 16-bit MCU portfolio. Key features include DSP engine instructions (MAC, DSP multiply-accumulate), a high-speed PWM module with complementary outputs and dead-time control, dual CAN 2.0B modules, Peripheral Trigger Generator (PTG), 4 DMA channels, and 5 timers. On-chip analog integration includes high-speed ADC, comparators, and op amps per the family datasheet title: '16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, Op Amps and Advanced Analog.' Architecturally, the dsPIC core uses a modified Harvard pipeline with separate program and data buses, allowing single-cycle instruction execution at 60 MIPS and deterministic interrupt latency essential for tight current-loop control in motor drives and digital power conversion. Typical applications include brushless DC (BLDC) and PMSM motor control, digital power supplies (PFC, LLC), automotive and industrial sensor interfaces with CAN connectivity, and embedded control systems requiring the extended -40C to +125C temperature range of the E-suffix grade. Design consideration: use the internal voltage regulator output capacitor (VCAP) per datasheet recommendations and ensure the 3.0V-3.6V supply rail is well decoupled at each VDD pin for clean ADC and PWM performance. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
DSPIC33EP256MC506-H/PT - 16-bit 60 MIPS DSC, 256KB Flash | Microchip
The Microchip Technology DSPIC33EP256MC506-H/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP256MC506 family, delivering 60 MIPS performance at a 60 MHz clock, with 256KB of Flash program memory and 32KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. It integrates on-chip operational amplifiers, a high-speed motor control PWM, 10-bit/12-bit ADCs, comparators, quadrature encoder interface, DMA and a watchdog timer, making it a single-chip solution for embedded digital signal control. A digital signal controller combines the compute throughput of a digital signal processor with the deterministic control peripherals of a microcontroller, sitting in the product hierarchy between general-purpose 16-bit MCUs (such as the PIC24 family) and full DSPs. Within power management and motion systems, a DSC executes sensorless or sensored control loops, power conversion algorithms, and digital filtering in a single closed loop, which is why the dsPIC33E family is a de facto standard in motor drive and digital power designs. Key features of the DSPIC33EP256MC506 include its 16-bit dsPIC DSC core with DSP instruction support, up to 256KB of self-programmable Flash and 32KB of SRAM, multiple high-resolution PWM modules for complementary or independent motor control outputs, an integrated analog front end (ADCs, comparators, and on-chip op amps that reduce external BOM cost), four DMA channels for low-CPU-overhead data movement, and five timers. The part operates from a 3.0V to 3.6V supply with a 3.3V nominal rail. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with hardware DSP multiply-accumulate, allowing loop rates sufficient for field-oriented control (FOC) of PMSM/BLDC motors and digital power topologies such as LLC or totem-pole PFC. The on-chip op amps can be used as current-sense amplifiers feeding the ADC, shortening the control loop latency versus external signal conditioning. Typical applications include precision motor control (BLDC, PMSM, ACIM drives), switch-mode power supplies and digital power, industrial automation, and embedded sensing systems. The 64-pin TQFP provides enough I/O for three-phase inverters with encoder or resolver feedback, and the device is supported by Microchip MCLV-2/MCHV-2 development boards via the MA330031 PIM. Design consideration: verify the operating temperature grade for the -H suffix against the latest Microchip datasheet, and budget the 3.0V-3.6V supply rail early in the design, since the core PLL and ADC accuracy depend on a clean 3.3V rail with adequate decoupling on all VDD/VSS pairs of the 64-pin TQFP. This page synthesizes distributor data, pin-compatible same-family drop-in alternatives, FAQs, and practical design notes not found in the manufacturer datasheet, as of 2026-09-24.
DSPIC33EP256MU806T-I/MR - 60 MIPS DSC, 256KB Flash, USB | Microchip
The Microchip DSPIC33EP256MU806T-I/MR is a 16-bit digital signal controller (DSC) delivering 60 MIPS performance (70 MIPS family maximum) with 256KB (85.5K x 24) of Flash program memory, 28KB of RAM, and integrated full-speed USB, housed in a 64-pin VQFN (9x9 mm, MR) package with exposed pad. A digital signal controller combines the computational core of a microcontroller with the DSP capability of a digital signal processor. In the embedded systems hierarchy, the dsPIC33EP family sits above general-purpose PIC16/PIC18 MCUs and below full DSP chips, offering a 16-bit modified Harvard architecture with DSP instruction extensions, hardware multiply-accumulate (MAC), and division support in a single-chip solution. This makes DSCs the workhorse of precision motor control, digital power conversion, and sensor-processing systems. Key features include dual CAN 2.0B modules (ECAN), full-speed USB 2.0 with OTG support, three I2C and two SPI and four UART modules, an 11-channel high-speed 16-bit PWM with 1.04 ns resolution for motor control, up to 27 general-purpose timers across multiple 16/32-bit blocks, and a 10-bit, 1.1 Msps ADC. The device operates from a single 3.0V to 3.6V supply and integrates 51 general-purpose I/O lines. The dsPIC33EP core uses a pipelined 16-bit architecture with X and Y data memory buses enabling simultaneous fetch of two operands for DSP MAC instructions, plus a hardware barrel shifter and modulo/bit-reversed addressing for FFT algorithms. The programmable PLL allows a 60 MIPS execution rate from an external crystal, and the flexible clock tree supports run-time switching for power-sensitive designs. Typical applications include dual-motor control (dual PMSM/BLDC), digital power supplies with USB-connected supervision, industrial gateways bridging CAN and USB, and audio or sensor signal processing. The industrial -40C to +85C temperature grade (I suffix) suits harsh environments. Design consideration: the dsPIC33EP core requires an external low-ESR VCAP/VDDCORE capacitor for stable 1.8V core regulation - follow the Microchip reference schematic exactly, as incorrect VCAP selection is the most common bring-up failure. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the standard manufacturer datasheet.
DSPIC33EP256MU810T-E/PT - 60 MIPS 16-bit DSC | Microchip
The Microchip Technology DSPIC33EP256MU810T-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP MU family, delivering 60 MIPS performance at 60 MHz with 256 KB of Flash program memory, an integrated 32-channel 10/12-bit ADC, and USB OTG connectivity, all housed in a 100-pin TQFP (12x12 mm) surface-mount package and qualified to AEC-Q100 for automotive use. A digital signal controller combines the compute architecture of a microcontroller with the DSP engine of a digital signal processor. In the power-management hierarchy, the dsPIC33EP family sits between general-purpose MCUs and dedicated DSPs, pairing a 16-bit dsPIC RISC core with DSP multiply-accumulate instructions, DMA channels, and high-speed PWM peripherals. This makes DSCs the standard choice for closed-loop control systems that require both fast arithmetic and rich peripheral integration on one chip. Key differentiating features include the 60 MIPS dsPIC core with nanoWatt XLP low-power modes, 256 KB of self-programmable Flash, on-chip peripherals spanning CAN 2.0B, I2C, SPI, UART/USART, IrDA, and USB OTG, plus a flexible 32-channel analog-to-digital converter selectable between 10-bit and 12-bit resolution. 51 general-purpose I/O pins and multiple general-purpose timers support complex sequencing and measurement tasks. Architecturally, the dsPIC33EP core integrates a 16-bit ALU with DSP multiply-accumulate, barrel shifter, and modulo and bit-reversed addressing for FFT-type workloads. DMA offloads data movement between peripherals and RAM, allowing the ADC and PWM modules to run deterministic control loops without CPU intervention - critical for field-oriented motor control and digital power conversion. Operating supply is 3 V to 3.6 V, with the -E/PT suffix indicating the -40C to +125C extended automotive temperature range. Typical applications include precision brushless and PMSM motor control, digital power supplies and solar inverters, automotive body and powertrain modules exploiting the AEC-Q100 qualification, and embedded systems requiring USB device connectivity with real-time DSP processing. Design consideration: the 3.0-3.6 V supply range means 5 V systems require a regulator, and the 100-pin TQFP demands careful decoupling of every VDD/VSS pair plus a solid ground plane for analog ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EP 100-pin family, and practical design notes not found in the manufacturer datasheet.
DSPIC33EP256MU810T-I/PF - 60 MIPS DSC, 256KB Flash | Microchip
The Microchip Technology DSPIC33EP256MU810T-I/PF is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS performance with 256KB (85.5K x 24) of Flash program memory and 28KB of SRAM, housed in a 100-pin TQFP (14x14 mm) package rated for industrial temperatures (-40C to +85C). A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP. Within the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EP sits above a basic 8-bit MCU but below a full DSP-plus-MCU two-chip solution, providing a single-chip signal chain. The dsPIC33E family integrates a high-performance DSP engine with enhanced on-chip peripherals targeted at precision control applications. Key features of this device include the 60 MIPS dsPIC33EP core, 256KB of self-programmable Flash, and on-chip peripherals highlighted by Microchip for the family: high-speed PWM modules, USB connectivity, and advanced analog converters with up to 32 channels supporting 10-bit or 12-bit resolution. Multiple DMA channels offload data movement, and general-purpose timers support complex sequencing without CPU intervention. Architecturally, the dsPIC33EP core executes an enhanced 16-bit instruction set with DSP multiply-accumulate instructions, enabling single-cycle MAC operations for filtering and control loops. The wide 100-pin TQFP exposes 51 I/O ports worth of general-purpose connectivity, giving designers pin-count headroom for motor-control bridges, communication buses, and human-interface signals on a single controller. Typical applications include precision motor control (BLDC, PMSM, stepper), digital power supplies and lighting, USB-connected industrial instruments, and embedded control systems requiring DSP-grade filtering. The high-speed PWM makes it particularly well matched to three-phase inverter stages. Design consideration: the device operates from a 3.0V to 3.6V supply, so level-shift appropriately when interfacing with 5V logic, and follow Microchip decoupling guidance with low-ESR ceramics at each VDD/VSS pair. This page synthesizes distributor pricing, drop-in alternatives across the dsPIC33EP family, and practical design notes not found in the manufacturer datasheet alone.
DSPIC33EP256MU810T-I/PT - 60 MIPS DSC 256KB USB | Microchip
The Microchip Technology DSPIC33EP256MU810T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP 33EP (MU) family, delivering 60 MIPS performance with 256KB (85.5K x 24) FLASH program memory and 28KB RAM, housed in a 100-pin TQFP (12x12 mm, PT) surface-mount package with integrated USB. A digital signal controller combines the compute architecture of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power-management and embedded-control hierarchy, the DSC sits above a general-purpose MCU in DSP throughput, making the dsPIC33 family a standard choice for precision motor control, digital power conversion, and sensing systems that require multiply-accumulate (MAC) performance on a 16-bit core. Key features of this part include the 60 MHz/60 MIPS dsPIC33E core, 256KB of self-programmable Flash, 28KB of SRAM, an integrated USB interface, ECAN, I2C, SPI and UART/USART serial connectivity (including IrDA support per distributor listings), and high-speed PWM peripherals targeted at digital power and motor-drive topologies. Technically, the dsPIC33EP core executes DSP instructions with single-cycle MAC and supports C compilation through Microchip MPLAB X IDE and the XC16 compiler. The MU sub-family is the USB-enabled branch of the 33EP line, and the datasheet family description also cites advanced analog integration and up to 512KB Flash and 52KB SRAM across the family roadmap. Typical applications include brushless DC and PMSM motor control, digital SMPS and LED drivers, USB-connected industrial sensors and instruments, and automotive-adjacent control nodes (the E-temperature variant DSPIC33EP256MU810T-E/PT is AEC-Q100 qualified per Microchip USA). A key design consideration: this is the I-grade (-40C to +85C) tape-and-reel variant in the 12x12 mm 100-TQFP; if your application requires 125C operation or automotive qualification, select the E/PT variant instead, which shares the same footprint. This page synthesizes distributor pricing tiers, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.
DSPIC33EP256MU814-E/PH - 256KB 60MHz DSC USB 144-TQFP | Microchip
The Microchip Technology DSPIC33EP256MU814-E/PH is a 16-bit digital signal controller (DSC) combining a 60 MHz dsPIC33E CPU core (up to 70 MIPS) with 256 KB of Flash program memory, 28 KB of RAM, USB, dual CAN and high-speed PWM peripherals, housed in a 144-pin TQFP (16x16 mm, 0.4 mm pitch) package rated from -40C to +125C. A digital signal controller is a hybrid class of processor that merges the computational power of a digital signal processor (DSP) with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs for math-intensive control loops and below full DSP-plus-MCU two-chip solutions, offering a single-chip path for motor control, digital power conversion and industrial sensing. Key features of the MU814 variant include 85.5K x 24-bit Flash words, USB 2.0 full-speed device support, dual CAN 2.0B modules, multiple UART/SPI/I2C ports, a 16-bit sigma-delta-free high-speed ADC subsystem, and the motor-control PWM with dead-time insertion that defines the dsPIC33E motor-control family. Barrel shifter and DSP multiply-accumulate instructions accelerate filters and transforms. Architecturally, the dsPIC33E core executes an enhanced 16-bit instruction set with hardware DSP engine (17x17 multiplier, dual 40-bit accumulators), zero-overhead DO and REPEAT loops, and a programmable PLL clock system that derives the 60 MHz device operation from a low-frequency crystal. Extended-temperature qualification (the -E suffix) and AEC-Q100 automotive usage reported by distributors make it suitable for harsh environments. Typical applications include dual-axis brushless DC and PMSM motor drives, digital power supplies and inverters, automotive body and powertrain auxiliary systems, and industrial automation nodes that need both USB connectivity and deterministic control loops. Design consideration: the device operates at 3.0 V to 3.6 V, so level shifting is required for 5 V peripherals; budget the 144-pin TQFP thermal and layout footprint early, and follow the Microchip reference manual clock-routing guidance for USB and CAN coexistence. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-24.
DSPIC33EP256MU814-I/PH - 16-bit DSC, 256KB Flash, 144-TQFP | Microchip
The Microchip Technology DSPIC33EP256MU814-I/PH is a 16-bit digital signal controller (DSC) from the dsPIC33EP motor-control family, offering 256KB of flash program memory, 28KB of RAM, operation up to 60 MIPS (70 MIPS-class dsPIC33E core), and integrated USB, dual CAN, and high-speed PWM peripherals in a 144-pin TQFP (PH) package. According to the Microchip product page, the dsPIC33E motor control family features an enhanced dsPIC DSC core with integrated DSP engine and on-chip peripherals for high-performance, precision motor control systems. A digital signal controller combines the computation architecture of a microcontroller with the multiply-accumulate hardware of a digital signal processor. In the semiconductor hierarchy, a DSC sits between a general-purpose MCU (such as the PIC24) and a dedicated DSP, making it well suited to closed-loop control loops that also require fast signal processing. The dsPIC33EP family is Microchip's 16-bit DSC generation built on an enhanced core with DSP instructions, barrel shifter, and 24-bit instruction word architecture. Key differentiating features of the MU814 variant include 85.5K x 24 instructions of flash (256KB), 28KB of SRAM, USB On-The-Go connectivity, dual CAN 2.0B modules for industrial networks, and high-speed PWM modules purpose-built for dual motor control - the datasheet title explicitly identifies this family as 'DSC with Dual Motor Control, Dual CAN, USB'. Peripherals for motor control include complementary PWM outputs, dead-time insertion, and ADCs timed to the PWM for field-oriented control (FOC). The device operates from a 3.0V to 3.6V supply and, in the -I temperature grade, from -40C to +85C. The E (extended) temperature grade variant covers -40C to +125C. The 144-pin TQFP provides up to 120 general-purpose I/O, giving enough pins to drive dual motors with encoder, Hall, or resolver feedback while simultaneously interfacing CAN, USB, and UART peripherals. Typical applications include dual-axis industrial servo drives, BLDC and PMSM motor control with field-oriented control, digital power supplies and inverters, automotive-adjacent industrial systems, and consumer appliances requiring high-performance signal processing and control. A key design consideration: this device is reportedly more sensitive to cross-talk between the PGEC/PGED in-circuit programming lines than other PIC devices, so keep ICSP traces short and isolated. Pricing starts around $12.48 at LCSC as of 2026-09-24. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing unique selection guidance for engineers and buyers.
DSPIC33EP32GP502-E/SP - 16-Bit 60MIPS DSC 32KB Flash | Microchip
The Microchip Technology DSPIC33EP32GP502-E/SP is a 16-bit Digital Signal Controller (DSC) delivering up to 60 MIPS core performance with 32KB (10.7K x 24) of Flash program memory and 4KB of RAM, housed in a 28-pin SPDIP (dip-28) package with extended temperature range. A Digital Signal Controller combines the computational architecture of a digital signal processor (hardware multiply-accumulate, DSP instruction set) with the peripheral integration and control-oriented design of a microcontroller. In the power-management hierarchy, the dsPIC33E family sits between general-purpose 16-bit MCUs (such as PIC24) and dedicated DSPs, offering single-cycle MAC, high-speed PWM, and advanced analog peripherals on one chip - ideal for real-time closed-loop control. Key features include the 16-bit dsPIC33E CPU core running at 60 MIPS, 32KB self-programmable Flash with ECC option, 4KB SRAM, CAN 2.0B communication, a Peripheral Trigger Generator (PTG), comparators, CTMU capacitive touch/timing module, and high-speed PWM outputs. According to Microchip product documentation, the GP (general purpose) subfamily integrates advanced analog such as op amps in larger pin-count members of the same die family. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator), two address generation units, and deterministic interrupt latency - the traits that make it preferred over ARM Cortex-M0+ parts for time-critical control loops at this price point. Typical applications include brushless DC and PMSM motor control using the high-speed PWM, switch-mode power supplies and digital power conversion, industrial sensing and precision measurement with the CTMU and comparators, and CAN-enabled embedded control nodes in industrial and vehicle systems. Design consideration: the E-suffix grade covers -40C to +125C, but derate flash endurance and electrical timing at the top of that range, and always decouple all VDD/VSS pin pairs with 100nF ceramics placed at the pins. This page synthesizes distributor pricing, pin-compatible dsPIC33EP drop-in variants, and practical design notes beyond what the standard Microchip datasheet page presents.
DSPIC33EP32GP502-H/SO - 16-bit DSC 32KB Flash 60MHz | Microchip
The Microchip Technology DSPIC33EP32GP502-H/SO is a 16-bit digital signal controller (DSC) featuring 32 KB of flash memory, 4 KB of RAM, and a 60 MHz core (approximately 20 MIPS of DSP performance within the dsPIC33E family), housed in a 28-pin SOIC package with 7.50 mm body width. A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and ease of use of a microcontroller. In the product hierarchy, the dsPIC33EP32GP502 sits within the dsPIC33EP general purpose family, under 16-bit Microcontrollers and Digital Signal Controllers, under Microchip's embedded processor portfolio. DSCs are used where math-heavy control loops (PID, filters, transforms) must run alongside general-purpose I/O and communication tasks. Key features of this part include 32 KB of self-programmable flash, 4 KB of SRAM, up to 60 MHz internal operation, high-speed PWM outputs suited for power conversion, on-chip analog integration including comparators, and a CAN 2.0B controller for automotive and industrial networking. The AiPCBA summary also lists two op amps, three comparators, a Peripheral Trigger Generator (PTG) and a Charge Time Measurement Unit (CTMU), which reduce external component count in analog sensing designs. Architecture-wise, the dsPIC33E core uses a 16-bit modified Harvard pipeline with DSP multiply-accumulate instructions, enabling efficient FIR/IIR filtering and motor control mathematics in single cycles. The family is described by Microchip as offering the highest-speed 70 MIPS class core with excellent code density, and the 32GP502 variant targets general purpose embedded control with advanced analog. Typical applications include digital power supplies and LED drivers using the high-speed PWM, sensor signal conditioning leveraging the on-chip op amps, comparators and CTMU, and industrial automation nodes using CAN 2.0B and standard serial peripherals. The 28-SOIC package suits through-hole-style or robust surface-mount industrial boards. Design consideration: verify the exact VDD range, peripheral pin mapping, and the meaning of the -H temperature/order-code suffix in the official Microchip datasheet before committing the PCB, since pinout multiplexing on 28-pin parts requires careful peripheral selection. This page synthesizes distributor listing data, datasheet-derived specifications, drop-in alternatives, and practical design notes not found on the manufacturer's product page alone.
DSPIC33EP32GP502-I/SO - 16-Bit DSC 60MIPS 32KB Flash | Microchip
The Microchip Technology DSPIC33EP32GP502-I/SO is a 16-bit digital signal controller (DSC) delivering 60 MIPS performance, 32KB (10.7K x 24) of Flash program memory, and 4KB of RAM, housed in a 28-pin SOIC package rated for -40C to +85C operation. A digital signal controller combines the computational strengths of a digital signal processor (DSP) - single-cycle MAC, hardware divide, DSP instruction extensions - with the peripheral integration and ease of use of a microcontroller (MCU). DSCs occupy the middle of the embedded hierarchy between general-purpose MCUs and dedicated DSP ICs, making them a natural choice for real-time control loops and signal conditioning where deterministic interrupt latency matters more than raw throughput. The dsPIC33EP32GP502 belongs to Microchip's dsPIC33EP general purpose (GP) family, which integrates CAN 2.0B communication, two on-chip operational amplifiers, three analog comparators, a Peripheral Trigger Generator (PTG), and a Charge Time Measurement Unit (CTMU). The 60 MIPS core executes from zero-wait-state Flash at 3.0V to 3.6V, and the high-speed PWM module with advanced analog peripherals supports precision mixed-signal designs. Architecturally, the device uses a modified Harvard, 16-bit RISC core with a 24-bit instruction word, hardware DSP engine (40-bit wide accumulator, single-cycle MAC), and multiple interrupt vectors that keep latency deterministic. A 10-bit ADC with up to 10 channels plus the CTMU enable capacitive and resistive measurement, while the dual op amps offload external analog signal conditioning. Typical applications include industrial motor control and power conversion, CAN-based automotive and industrial networking nodes, digital power supplies requiring high-speed PWM, and sensor systems leveraging the op amps and CTMU for direct analog front-end duties. Design consideration: the 60 MIPS core is clocked from an external crystal or internal FRC with the on-chip PLL; budget PCB space for a primary oscillator and follow Microchip AN1078-type guidance for analog grounding when using the op amps and CTMU simultaneously. This page synthesizes distributor pricing, same-family drop-in alternatives, pinout data, and practical design notes not found in the manufacturer product page, providing information gain over standard distributor listings.
DSPIC33EP32GP502T-E/MM - 16-bit 60MIPS DSC 32KB | Microchip
The Microchip Technology DSPIC33EP32GP502T-E/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP general purpose family, delivering up to 60 MIPS core performance, 32KB (10.7K x 24) of FLASH program memory, and a 28-pin VQFN (MM, QFN-S 6x6) package with exposed pad, rated for the extended -40C to +125C temperature range. A digital signal controller combines the control peripherals and ease of use of a microcontroller with the math throughput of a DSP core. In the power-management hierarchy, the dsPIC33E sits above basic 8-bit MCUs and below application processors, occupying the embedded control tier where deterministic interrupt latency and fast multiply-accumulate operations matter most. Key features include a 16-bit dsPIC33E core executing up to 60 MIPS, a 6-channel 10-bit or 12-bit ADC, multiple high-speed PWM modules suited to power conversion, 4-channel DMA, and on-chip POR, watchdog timer, and Brown-out Detect/Reset. These peripherals make the part well suited to closed-loop digital power and sensing systems without external analog components. Architecturally, the dsPIC33EP core uses an enhanced Harvard structure with a 24-bit instruction word and DSP engine supporting single-cycle MAC operations. The code-dense instruction set and Hardware Barrel Shifter reduce cycle counts in filtering and control algorithms compared with generic MCUs. Typical applications include digital power supplies, motor control, industrial automation, automotive subsystems (the device is AEC-Q100 listed per distributor data), and sensor signal conditioning. Design consideration: at 60 MIPS the core is sensitive to supply ripple, so use a solid 3.3V rail with 0.1uF decoupling on every VDD pin plus bulk capacitance near the exposed pad. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.