Integrated Circuits

Subcategories

📁 ADC/DAC 3,100+ products 📁 Amplifier ICs 1,900+ products 📁 Audio Codecs 18 products 📁 Audio ICs 2 products 📁 Clock & Timing 660+ products 📁 Comparator ICs 1 products 📁 DSP 1,100+ products 📁 Data Acquisition ICs 2 products 📁 Digital Potentiometers 4 products 📁 Display Drivers & Controllers 1 products 📁 FPGA & CPLD 7,300+ products 📁 Interface ICs 3,300+ products 📁 LED Drivers 1 products 📁 Logic ICs 460+ products 📁 Memory ICs 870+ products 📁 Microcontrollers 20,000+ products 📁 Microprocessors 4 products 📁 Motor Drivers 1 products 📁 Other 1 products 📁 Sensor and Detector Interfaces 1 products 📁 Specialized ICs 15 products 📁 Video ICs 14 products

Products (39,000+)

STM32F756BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F756BGT6

STM32F756BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F756BGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the Arm® Cortex®-M7 core with DSP and FPU instructions. It operates at up to 216 MHz, providing exceptional computational throughput for demanding embedded applications. The device integrates 1 Mbyte of Flash memory and 320 Kbytes of SRAM, along with a comprehensive set of peripherals including multiple communication interfaces, analog-to-digital converters, and advanced motor control timers. Housed in a 208-pin LQFP package (28x28 mm), it offers extensive I/O capabilities for complex system integration. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F756BGT6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit Arm Cortex-M microcontrollers. This family is widely used in industrial control, consumer electronics, and IoT devices due to its balance of performance, power efficiency, and peripheral richness. The Cortex-M7 core is a high-performance member of the Cortex-M family, featuring a six-stage superscalar pipeline and optional double-precision floating-point unit, making it suitable for applications requiring significant digital signal processing. Key features of the STM32F756BGT6 include a 216 MHz CPU with 2.14 CoreMark/MHz, a Chrom-ART Accelerator for 2D graphics, a hardware cryptographic processor supporting AES, 3DES, and RSA, and a true random number generator. It also provides a camera interface, an LCD-TFT controller, and a wide range of communication peripherals including Ethernet, USB OTG HS/FS, CAN, SPI, I2C, USART, and SAI. The device supports a supply voltage range of 1.8V to 3.6V and operates over a temperature range of -40°C to +85°C. From a technical architecture perspective, the STM32F756BGT6 integrates an advanced memory protection unit (MPU), a direct memory access (DMA) controller with up to 16 streams, and a flexible static memory controller (FMC) for external memory expansion. The device also features a 12-bit ADC with up to 24 channels, a 12-bit DAC, and multiple 16-bit and 32-bit timers. The inclusion of a true random number generator and cryptographic acceleration makes it suitable for secure communication applications. Typical applications for the STM32F756BGT6 include industrial automation and control systems, motor drives, power conversion, medical devices, and high-end consumer electronics such as smart home hubs and audio equipment. Its high processing power and rich peripheral set enable complex real-time control and signal processing tasks. When designing with this device, careful attention should be paid to power supply decoupling, with a 100nF capacitor placed close to each power pin and a 4.7uF bulk capacitor on the main supply. The LQFP-208 package requires proper thermal management, and the exposed pad should be connected to ground with adequate vias for heat dissipation.

USD $15.86 Contact
STM32F756VGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F756VGT6

STM32F756VGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F756VGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M7 core running at up to 216 MHz. It integrates 1 MB of flash memory and 320 KB of SRAM, along with a rich set of peripherals including a TFT-LCD controller, camera interface, cryptographic acceleration, and multiple communication interfaces. The device is housed in a 100-pin LQFP package (LQFP100) and operates over a temperature range of -40°C to +85°C. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine control units to IoT sensors and industrial automation systems. The STM32F756VGT6 belongs to the STM32F7 series, which is positioned as a high-performance MCU family within the broader STM32 ecosystem, offering a balance of processing power, connectivity, and advanced security features. Key features of the STM32F756VGT6 include a 216 MHz ARM Cortex-M7 core with double-precision floating-point unit (FPU), 1 MB of flash memory, 320 KB of SRAM, and a comprehensive set of peripherals. It supports a TFT-LCD controller with up to XGA resolution, a camera interface, and hardware cryptographic acceleration (AES, DES, 3DES, SHA-1, SHA-256, and true random number generator). The device also includes a 12-bit ADC, 12-bit DAC, multiple timers, and a wide range of communication interfaces such as USART, SPI, I2C, CAN, USB OTG HS/FS, Ethernet MAC, and SDMMC. From a technical depth perspective, the STM32F756VGT6 leverages the ARM Cortex-M7 architecture, which features a 6-stage pipeline and a branch prediction unit, enabling efficient execution of complex algorithms. The inclusion of a double-precision FPU accelerates floating-point math, making it suitable for digital signal processing (DSP) and motor control applications. The device also incorporates a memory protection unit (MPU) and a cache controller (I-Cache and D-Cache) to optimize performance and reliability. The cryptographic hardware accelerator offloads encryption/decryption tasks from the CPU, enhancing security and throughput. Typical applications for the STM32F756VGT6 include industrial automation, motor control, IoT gateways, smart home devices, medical equipment, and high-end consumer electronics. Its combination of processing power, connectivity, and security features makes it ideal for applications requiring real-time control, advanced user interfaces, and secure data communication. For instance, in an IoT gateway, the STM32F756VGT6 can manage multiple communication protocols (Ethernet, USB, CAN) while running a real-time operating system (RTOS) and handling cryptographic operations for secure cloud connectivity. When designing with the STM32F756VGT6, ensure proper power supply decoupling with 100 nF capacitors close to each VDD pin and a 4.7 µF bulk capacitor. The device requires a 3.3V supply, and the internal regulator can be configured to 1.2V for the core. Pay attention to the VDDA pin for analog peripherals, which should be filtered with a ferrite bead and capacitor. For high-speed interfaces like USB and Ethernet, follow the layout guidelines in the STM32F7 reference manual (RM0385) to maintain signal integrity.

RFQ Contact
STM32F756ZGT6 - 32-bit ARM Cortex-M7 MCU 1MB Flash | STMicroelectronics
STM32F756ZGT6

STM32F756ZGT6 - 32-bit ARM Cortex-M7 MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F756ZGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M7 core, operating at up to 216 MHz. It integrates 1 MB of Flash memory and 320 KB of SRAM, along with a comprehensive set of peripherals including Ethernet MAC, USB OTG HS/FS, camera interface, and multiple communication interfaces. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body, making it suitable for a wide range of industrial, consumer, and IoT applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brain of embedded systems, executing firmware to control devices, process sensor data, and communicate with other systems. In the hierarchy of computing devices, a microcontroller falls under embedded processors, which are a subset of semiconductor devices. The STM32F7 series represents the high-performance tier of ST's STM32 family, offering the ARM Cortex-M7 core with DSP and FPU instructions for advanced signal processing and control. Key features of the STM32F756ZGT6 include a 216 MHz ARM Cortex-M7 core with double-precision FPU and DSP instructions, 1 MB of Flash memory, 320 KB of SRAM, and a Chrom-ART Accelerator for enhanced graphics performance. It supports a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 3x I2C, 2x CAN, 1x SDMMC, 1x Ethernet MAC, 1x USB OTG HS, 1x USB OTG FS, and 1x camera interface. The device also features a 12-bit ADC with up to 24 channels, a 12-bit DAC with 2 channels, and multiple timers including advanced-control timers. The operating voltage range is 1.7V to 3.6V, and the temperature range is -40°C to +85°C (T suffix). The STM32F756ZGT6 is built on ST's advanced 90nm process technology, enabling high performance with low power consumption. The Cortex-M7 core with 6-stage pipeline and branch prediction delivers 2.14 CoreMark/MHz, making it one of the fastest MCUs in its class. The device includes a memory protection unit (MPU), a direct memory access (DMA) controller with 16 streams, and a true random number generator (TRNG) for security applications. The Chrom-ART Accelerator offloads 2D graphics operations from the CPU, improving GUI performance in display applications. Typical applications include industrial control systems, motor drives, power conversion, IoT gateways, audio processing, and human-machine interfaces (HMI). The Ethernet MAC with IEEE 1588 support enables precise time synchronization in networked industrial systems. The camera interface supports parallel camera sensors for machine vision applications. The USB OTG HS with internal PHY allows high-speed data transfer in portable devices. When designing with this device, ensure adequate decoupling on all power supply pins (VDD, VDDA, VDDUSB) with 100nF and 4.7uF capacitors. The VCAP pins require a 2.2uF capacitor for internal regulator stability. For high-speed interfaces like Ethernet and USB, follow the layout guidelines in the datasheet to maintain signal integrity. The device supports multiple boot modes via BOOT0 and BOOT1 pins, which must be configured correctly for firmware programming.

RFQ Contact
STM32F765BGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F765BGT6

STM32F765BGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

STMicroelectronics STM32F765BGT6 is a 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of flash memory and 512 KB of SRAM, housed in a 208-pin LQFP 28 x 28 mm package. It is designed for high-performance embedded applications requiring substantial code and data memory, fast interrupt handling, floating-point arithmetic, and extensive peripheral connectivity. The STM32F765BGT6 is identified by STMicroelectronics as a tray-packaged member of the STM32F765 device family. An Arm Cortex-M7 microcontroller is a 32-bit RISC processor within the broader embedded processor and semiconductor hierarchy. Its CPU incorporates a floating-point unit, making it suitable for control algorithms, signal processing, communications, and human-machine-interface workloads. Within STMicroelectronics product families, STM32 devices combine the processor core with memory, clocking, real-time control, security, connectivity, and analog peripherals in one integrated circuit. The verified product data identifies a maximum operating frequency of 216 MHz, 1 MB of flash organized as 1 M x 8 bits, a 3.3 V supply, and 208 LQFP leads. The large flash capacity supports substantial firmware, bootloader functionality, protocol libraries, and graphical or control logic. The Cortex-M7 floating-point unit supports compact DSP-style calculations without requiring an external processor, while the high clock rate can reduce control-loop latency in demanding embedded systems. STMicroelectronics groups the STM32F765xx with the STM32F767xx, STM32F768Ax, and STM32F769xx devices in its official documentation. These families share the high-performance Arm Cortex-M7 platform, but firmware selection must account for differences in memory size, peripheral availability, pin assignment, and device-specific hardware features. The family datasheet is the controlling reference for electrical limits, pin multiplexing, boot configuration, clock trees, and peripheral availability. Typical uses include industrial automation equipment, motor-control systems, networked industrial controllers, high-end audio and communications equipment, test and measurement instruments, and human-machine interfaces. The 208-pin LQFP package provides a large pin count for external memory or communication interfaces, while the 1 MB flash and 512 KB SRAM allow more complex control software to be consolidated onto one device. Exact peripheral assignments must be checked against the selected package variant. Designers should verify the complete pin and peripheral matrix before layout because an LQFP footprint does not by itself guarantee software or hardware interchangeability. Power, decoupling, clock stability, reset, boot configuration, and unused-pin treatment must follow the manufacturer datasheet. An MCU replacement should be validated for memory requirements, peripheral differences, pin multiplexing, timing, firmware support, and lifecycle status rather than being selected from package dimensions alone. This page consolidates the verified 216 MHz Cortex-M7 performance, 1 MB flash, 512 KB SRAM, 208-pin LQFP packaging, distributor sourcing, and same-family drop-in assessment into an engineering-focused reference. It also separates confirmed data from fields that still require manufacturer or distributor confirmation, helping designers make a safer sourcing and design decision.

RFQ Contact
STM32F765BIT6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765BIT6

STM32F765BIT6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

The STMicroelectronics STM32F765BIT6 is a 32-bit Arm Cortex-M7 microcontroller with FPU operating up to 216 MHz, 2 MB of Flash memory, and a 208-pin LQFP package measuring 28 x 28 mm. It combines high-performance embedded control with extensive connectivity and memory-oriented peripherals for industrial, communications, audio, and graphics applications. What is an Arm Cortex-M7 microcontroller? A Cortex-M7 MCU is a reduced-instruction-set processor core integrated into a semiconductor device with Flash, SRAM, clocking, communication peripherals, timers, analog interfaces, and GPIO. Within the hierarchy of Arm Cortex-M microcontrollers, MCU, embedded processor, and semiconductor, it provides real-time control while executing higher-performance workloads than simpler Cortex-M devices. Key verified features include a 32-bit architecture, 216 MHz maximum CPU frequency, and 2 MB of Flash organized as 2M x 8 bits. The device also provides 512 KB of SRAM according to the verified product listing. Its 208-LQFP package exposes a broad pin count for high-performance embedded systems, while its operating supply value of 3.3 V is confirmed by the verified distributor data. The STM32F7 family combines a high-performance CPU with extensive hardware resources intended for demanding embedded control. Its architecture can support connected industrial controllers, human-interface systems, communications equipment, and embedded audio or graphics functions. Peripheral assignments, timers, analog features, and package-level multiplexing must be checked against the official datasheet before final schematic capture. Typical applications include industrial automation, networked control equipment, communications infrastructure, multimedia controllers, audio processing, and data-acquisition systems. The 2 MB Flash capacity is useful for firmware, protocol stacks, and embedded control logic, while the 216 MHz Cortex-M7 core provides computational headroom for responsive real-time operation. Designers should preserve the package footprint and verify every power, decoupling, clock, reset, boot, and peripheral signal against the official pinout. Because this page is constrained to verified source values, voltage tolerances, current limits, temperature limits, and detailed electrical characteristics remain marked for data completion rather than inferred. This page consolidates the verified manufacturer and distributor facts for STM32F765BIT6, including package, memory, processor frequency, sourcing links, and application guidance. It does not infer unprovided electrical limits or claim cross-part compatibility without verified evidence.

RFQ Contact
STM32F765IGK6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F765IGK6

STM32F765IGK6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F765IGK6 is a high-performance 32-bit Arm Cortex-M7 microcontroller with single-precision and double-precision FPU, ART Accelerator and 16 Kbytes of I/D-cache, delivering up to 216 MHz core frequency in a 176+25 UFBGA (10x10 mm) package. It integrates 1 Mbyte of embedded Flash and 512 Kbytes of SRAM, achieves 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1), and supports DSP instructions plus a memory protection unit (MPU). The 0-wait-state execution from both internal flash and external memories makes it suitable for deterministic real-time workloads. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and programmable peripherals. The STM32F765IGK6 belongs to the high-performance Cortex-M7 class of MCUs, which sits above Cortex-M4 devices in the Arm Cortex-M taxonomy and below Cortex-A application processors. Within STMicroelectronics' portfolio, the STM32F7 family is positioned as the high-performance mainstream line between the STM32F4 mainstream line and the STM32H7 very-high-performance line, and is widely used as the controller host for graphics, motor control, audio, and connectivity-rich embedded systems. Key differentiating features include a 16-bit Chrom-ART Accelerator for graphics workloads, dual-mode Quad-SPI flash interface, USB 2.0 OTG full-speed and high-speed with on-chip PHY, two CAN 2.0B interfaces, SDMMC, FMC for external memory, Ethernet MAC, three 12-bit ADCs (2.4 MSPS), two 12-bit DACs, and a crypto/hash hardware accelerator supporting AES, SHA, and 3DES. The integrated L1 cache plus ART Accelerator effectively eliminates the flash wait-state penalty even at 216 MHz. Architecturally the device uses an M7 core with branch prediction, tightly-coupled memory, and a dedicated DMA engine cluster (two DMA controllers with FIFOs). An on-chip DSI host controller and parallel TFT LCD interface give the STM32F765IGK6 strong graphics capability for display-driven HMI designs without an external graphics controller. The wide peripheral set (UART/USART, SPI, I2C, SAI, SPDIF, HDMI-CEC, timers, RTC) covers most industrial, audio, and connectivity bridges. Typical applications include industrial motor drives and frequency inverters, building automation HVAC controllers, medical imaging interfaces, audio processing and consumer audio equipment, DSI-equipped HMI panels, USB-based industrial bridges, and graphics-rich IoT gateways. The 176-ball UFBGA package footprint is shared across the STM32F7 family, enabling drop-in scalability between STM32F765, STM32F767, and STM32F769 density variants. When designing with this part, verify that the 216 MHz core supply (typically 1.7-1.9 V from the internal LDO or external SMPS) is decoupled with low-impedance ceramic caps near each VDD/VSS pair. For high-EMI environments, gate the 25 MHz HSE crystal traces with a guard ring and use the on-chip PLL spread-spectrum option to relax radiated emissions. This page synthesizes real-time distributor pricing, drop-in pin-compatible alternatives, application notes, and design considerations beyond the manufacturer datasheet summary, helping engineers evaluate the STM32F765IGK6 for new designs and as a second-source-qualified replacement.

RFQ Contact
STM32F765IGK6TR - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics (Tape & Reel)
STM32F765IGK6TR

STM32F765IGK6TR - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F765IGK6TR is a high-performance 32-bit Arm Cortex-M7 microcontroller with single-precision and double-precision FPU, ART Accelerator and 16 Kbytes of I/D-cache, delivering up to 216 MHz core frequency in a 176+25 UFBGA (10x10 mm) package. It integrates 1 Mbyte of embedded Flash and 512 Kbytes of SRAM, achieves 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1), and supports DSP instructions plus a memory protection unit (MPU). The 0-wait-state execution from both internal flash and external memories makes it suitable for deterministic real-time workloads. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and programmable peripherals. The STM32F765IGK6TR belongs to the high-performance Cortex-M7 class of MCUs, which sits above Cortex-M4 devices in the Arm Cortex-M taxonomy and below Cortex-A application processors. Within STMicroelectronics' portfolio, the STM32F7 family is positioned as the high-performance mainstream line between the STM32F4 mainstream line and the STM32H7 very-high-performance line, and is widely used as the controller host for graphics, motor control, audio, and connectivity-rich embedded systems. Key differentiating features include a 16-bit Chrom-ART Accelerator for graphics workloads, dual-mode Quad-SPI flash interface, USB 2.0 OTG full-speed and high-speed with on-chip PHY, two CAN 2.0B interfaces, SDMMC, FMC for external memory, Ethernet MAC, three 12-bit ADCs (2.4 MSPS), two 12-bit DACs, and a crypto/hash hardware accelerator supporting AES, SHA, and 3DES. The integrated L1 cache plus ART Accelerator effectively eliminates the flash wait-state penalty even at 216 MHz. Architecturally the device uses an M7 core with branch prediction, tightly-coupled memory, and a dedicated DMA engine cluster (two DMA controllers with FIFOs). An on-chip DSI host controller and parallel TFT LCD interface give the STM32F765IGK6TR strong graphics capability for display-driven HMI designs without an external graphics controller. The wide peripheral set (UART/USART, SPI, I2C, SAI, SPDIF, HDMI-CEC, timers, RTC) covers most industrial, audio, and connectivity bridges. Typical applications include industrial motor drives and frequency inverters, building automation HVAC controllers, medical imaging interfaces, audio processing and consumer audio equipment, DSI-equipped HMI panels, USB-based industrial bridges, and graphics-rich IoT gateways. The 176-ball UFBGA package footprint is shared across the STM32F7 family, enabling drop-in scalability between STM32F765, STM32F767, and STM32F769 density variants. When designing with this part, verify that the 216 MHz core supply (typically 1.7-1.9 V from the internal LDO or external SMPS) is decoupled with low-impedance ceramic caps near each VDD/VSS pair. For high-EMI environments, gate the 25 MHz HSE crystal traces with a guard ring and use the on-chip PLL spread-spectrum option to relax radiated emissions. This page synthesizes real-time distributor pricing, drop-in pin-compatible alternatives, application notes, and design considerations beyond the manufacturer datasheet summary, helping engineers evaluate the STM32F765IGK6TR for new designs and as a second-source-qualified replacement.

RFQ Contact
STM32F765IGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F765IGT6

STM32F765IGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F765IGT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU, operating at up to 216 MHz and delivering 462 DMIPS / 1082 CoreMark, packaged in a 176-pin LQFP (24x24 mm) and integrating 1 MB of Flash and 512 KB of SRAM. Key features include a single-precision and double-precision FPU, L1 cache (16 KB I-cache + 16 KB D-cache), ART Accelerator for flash execution, a Chrom-ART accelerator for 2D graphics, and a JPEG codec. The device integrates extensive connectivity peripherals including three USB 2.0 OTG ports (one with HS PHY), two CAN 2.0B interfaces, an IEEE 802.3-compliant 10/100 Ethernet MAC with dedicated DMA, three I2S interfaces, six SPI ports, and SDMMC support, making it suitable for networked embedded and multimedia applications. The STM32F765 belongs to the Cortex-M7-based STM32F7 family, which targets high-performance embedded applications above the Cortex-M4 tier. Compared with Cortex-M4, the Cortex-M7 superscalar core adds branch prediction, SIMD instructions, and tightly-coupled L1 caches, achieving roughly 2x Dhrystone performance per MHz. The F765 position relative to its siblings F767/F769 brings graphics (Chrom-ART, LTDC, JPEG), Ethernet, USB HS, and DSI while keeping the cost-effective LQFP-176 rather than the higher-pin-count BGA packages. Memory architecture: 1 MB of dual-bank Flash with read-while-write support enables firmware upgrades without downtime, and 512 KB of SRAM is split into 368 KB of general-purpose SRAM plus dedicated 16 KB instruction TCM and 16 KB data TCM for time-critical code. Peripherals include three 12-bit ADCs at 2.4 MSPS each, two 12-bit DACs, multiple timers including HRTIM for power conversion, a 32-bit RTC, and AES-256 + True Random Number Generator hardware cryptography. Typical applications include industrial motor-control and fieldbus nodes, networked gateways and IoT edge devices, graphical HMI panels, audio processing, and high-speed data acquisition. The integrated Ethernet MAC with dedicated DMA enables deterministic real-time networking, while the USB HS PHY simplifies data-loading designs. Design consideration: decoupling is critical - place one 100 nF ceramic per VDD/VDDA pin pair as close as possible, and provide a 4.7 uF bulk capacitor near the regulator. Configure the BOOT0 pin via a 10 kohm pull-down plus a small capacitor to ground to filter transient glitches. This page synthesizes distributor pricing, verified drop-in alternatives within the LQFP-176 family, and field-ready design notes not found on a single datasheet page.

RFQ Contact
STM32F765IIK6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765IIK6

STM32F765IIK6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

The STMicroelectronics STM32F765IIK6 is a 32-bit Arm Cortex-M7 microcontroller with a 216 MHz CPU, 2 MB of flash memory, and a 176+25 UFBGA package measuring 10 mm by 10 mm. It is designed for high-performance embedded control, DSP, graphics, networking, and connected industrial applications. The Cortex-M7 core includes an FPU, DSP instructions, an L1 cache, an MPU, and the ART Accelerator for efficient embedded execution. An Arm Cortex-M7 microcontroller is a 32-bit embedded processor based on the Arm Cortex-M architecture. It combines real-time interrupt-driven control with higher-performance DSP and floating-point capabilities than typical entry-level microcontrollers. In the STM32 product hierarchy, the STM32F765 belongs to the STM32F7 family of high-performance microcontrollers, combining general-purpose control, memory acceleration, and extensive peripheral integration. The verified product information identifies a maximum CPU frequency of 216 MHz, 2 MB of flash, a 176+25 UFBGA package, and a 10 mm by 10 mm package size. The manufacturer’s STM32F765 product family datasheet also identifies up to 2 MB flash, 462 DMIPS, SDRAM, DFSDM, and advanced signal-processing and connectivity features. These characteristics make the STM32F765IIK6 suitable for applications requiring more computation and memory than a basic Cortex-M microcontroller. The Cortex-M7 architecture is designed to improve instruction throughput through its pipeline, cache mechanisms, DSP support, and ART Accelerator. The FPU supports floating-point workloads, while DSP instructions accelerate common filtering and signal-processing operations. An MPU can provide memory-protection capabilities for systems that require isolation between critical tasks or software components. These features are especially valuable in control systems, audio equipment, industrial controllers, and embedded human-machine interfaces. Typical applications include industrial automation, motor and motion control, audio and DSP systems, communications equipment, test and measurement instruments, and connected embedded products. The STM32F765IIK6 is also identified by a distributor source as a supported flight-controller MCU target in the STM32F7X5 family. For flight-control designs, careful validation of motor control, sensor timing, power supplies, and firmware remains essential. The 176+25 UFBGA package is a fine-pitch, high-density package that requires careful PCB layout, controlled escape routing, adequate power delivery, and reliable assembly capability. The 10 mm by 10 mm outline and 0.65 mm pitch place demands on via planning, solder mask, thermal management, and inspection. The package is not a direct substitute for parts using a leaded package or a different ball count. This page consolidates verified distributor information, the manufacturer datasheet link, application context, comparison fields, and practical design considerations. Because the supplied web results do not expose a complete verified price table or a complete manufacturer pinout list, unavailable values are marked for validation rather than inferred. The STM32F765IIK6 should be selected when a design specifically requires the STM32F765 device identity, 216 MHz Cortex-M7 performance, 2 MB flash, and the 176+25 UFBGA footprint. Confirm package pin assignments, voltage rails, memory configuration, peripheral availability, lifecycle status, and assembly capability against the official STM32F765 family datasheet before releasing a production PCB.

RFQ Contact
STM32F765IIK7 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765IIK7

STM32F765IIK7 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

STMicroelectronics STM32F765IIK7 is a high-performance 32-bit Arm Cortex-M7 microcontroller with FPU, operating up to 216 MHz and delivering 462 DMIPS, with 2 MB of Flash in a 176+25-pin UFBGA 10 x 10 mm package. It combines embedded control capability with high-speed digital signal processing and extensive connectivity for demanding embedded systems. A microcontroller, or MCU, integrates a processor core, Flash memory, SRAM, peripherals, and interface controllers into one package. The STM32F765 belongs to the STM32F7 high-performance MCU family, combining an Arm Cortex-M7 CPU core with embedded Flash, RAM, real-time peripherals, and connectivity hardware. This places it above general-purpose Cortex-M devices in the hierarchy of MCU, embedded processor, and semiconductor. Verified headline features include a 32-bit Arm Cortex-M7 core with FPU, a maximum operating frequency of 216 MHz, 462 DMIPS computational performance, and 2 MB of Flash memory. The supplied distributor data identifies a 176+25 UFBGA package measuring 10 x 10 mm. Its performance is useful for control loops, real-time signal processing, communications gateways, and human-machine-interface systems where deterministic execution and external peripheral integration matter. The Cortex-M7 architecture is designed for efficient real-time execution and includes hardware floating-point support for DSP-oriented workloads. The STM32F765 device family also provides features associated with the STM32F7 platform, including multi-layer bus architecture, DMA, and high-speed peripherals. However, exact RAM capacity, voltage limits, peripheral variants, timing limits, and package pin assignments must be confirmed in the manufacturer datasheet before a new design is released. Typical uses include industrial automation, communications infrastructure, audio and signal-processing equipment, display controllers, and connected embedded products. Designers can pair the MCU with Ethernet PHY, USB interface, memory, and sensor components when their electrical and protocol requirements match. Firmware configuration, clock planning, peripheral pin multiplexing, and package-level escape routing remain central to successful implementation. For PCB design, provide a regulated supply, decoupling close to power pins, an exposed-pad-aware thermal strategy, and clean clock routing. SWD programming and recovery should remain accessible in production. Because detailed electrical limits and pin names are not fully available in the supplied verified data, they must be checked directly against the STMicroelectronics family datasheet. This page consolidates verified distributor specifications, package information, sourcing data, practical application guidance, and same-family replacement analysis. It is intended to accelerate engineering evaluation while clearly separating verified facts from parameters that still require manufacturer-datasheet confirmation.

RFQ Contact
STM32F765IIT6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765IIT6

STM32F765IIT6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

The STMicroelectronics STM32F765IIT6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 2 MB of Flash memory, in a 176-LQFP 24 mm × 24 mm package. It belongs to the STM32F7 microcontroller family and combines a 32-bit RISC processor core, embedded memory, and extensive peripheral connectivity in one integrated circuit. A microcontroller is a programmable system-on-chip that executes firmware, reads sensor and user inputs, controls outputs, and manages communications. The STM32F7 series sits within the hierarchy microcontroller → 32-bit microcontroller → Arm Cortex-M MCU → STM32F7 high-performance MCU. This device is suited to applications requiring substantially more processing capability than basic 8-bit or low-cost Cortex-M controllers while retaining the ecosystem and software model associated with Arm Cortex-M devices. The verified product information identifies an Arm Cortex-M7 core, a maximum operating frequency of 216 MHz, and 2 MB of Flash organized as 2M × 8. The STM32F765xx family is described by STMicroelectronics as a high-performance Cortex-M7 platform. These headline values support responsive control loops, connected embedded products, and signal-processing workloads where CPU throughput and program storage are important selection criteria. The STM32F765IIT6 is identified specifically as a 176-LQFP package measuring 24 mm × 24 mm. This large leaded package provides 176 external connection points and is suitable for prototypes, industrial controllers, and equipment where fine-pitch BGA assembly is undesirable. Exact pin functions, electrical limits, memory-map details, and peripheral configurations must be checked against the manufacturer datasheet before final PCB design. Typical uses include industrial automation, motor and motion control, communications equipment, instrumentation, human-interface systems, and connected embedded products. At 216 MHz, the device can process firmware concurrently with communications and control tasks, while its 2 MB Flash capacity provides room for larger application code. Because detailed peripheral and timing specifications were not included in the verified search data, they should not be inferred without reviewing the official datasheet. A practical design begins with the STMicroelectronics STM32F765xx datasheet, followed by the device reference manual, pin definitions, electrical characteristics, and package drawing. Confirm the exact suffix temperature range and ordering information, preserve all required power and decoupling connections, and validate the 176-pin land pattern against the official package drawing. Do not substitute another STM32F7 member solely because it uses Cortex-M7; Flash size, pinout, peripheral mix, and qualification must match. This page consolidates the verified manufacturer and distributor facts for STM32F765IIT6, including the 216 MHz Cortex-M7 core, 2 MB Flash, 176-LQFP package, source links, and design considerations. It is intended to accelerate engineering discovery, but the manufacturer datasheet remains the authoritative source for release timing, electrical limits, and production details.

RFQ Contact
STM32F765IIT7 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765IIT7

STM32F765IIT7 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

STMicroelectronics STM32F765IIT7 is a 32-bit ARM Cortex-M7 microcontroller with a maximum operating frequency of 216 MHz, 2 MB of Flash memory, and a 176-pin LQFP package measuring 24 x 24 mm. The device is positioned for high-performance embedded control, industrial automation, communications, and DSP-oriented systems that require more processing capability than an entry-level Cortex-M microcontroller. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, peripherals, and interface controllers on one device. The STM32F765 belongs to the STM32F7 high-performance microcontroller family, where the ARM Cortex-M7 core sits within the broader embedded MCU and semiconductor hierarchy. Its 32-bit architecture supports efficient control, communications, and digital signal-processing workloads, while integrated peripherals reduce the component count required in industrial and embedded products. The verified product information identifies a 216 MHz operating speed and 2 MB Flash capacity. The manufacturer product page also confirms that the STM32F765 device family uses the Arm Cortex-M7 32-bit RISC core and can operate at up to 216 MHz. Available family information identifies the STM32F765, STM32F767, STM32F768Ax, and STM32F769xx devices as members of the same high-performance Cortex-M7 platform. Detailed RAM, operating-voltage, peripheral, and thermal limits were not included in the supplied verified excerpts. The STM32F765IIT7 combines a 216 MHz Cortex-M7 processor with 2 MB of embedded Flash in a 176-LQFP package. Its large pin count supports the broad pin-oriented interface mix associated with high-performance STM32 devices, including communication, timing, analog-control, and general-purpose I/O functions. The exact pin assignments, alternate functions, exposed programming pins, and ground distribution must be taken from the official STM32F765-series datasheet before PCB routing or schematic capture is released. Typical uses include industrial controllers, factory automation equipment, communications gateways, motor-control systems, test and measurement instruments, and embedded signal-processing products. The Cortex-M7 execution rate is useful for protocol handling, real-time control loops, and DSP-assisted filtering. Designers should still budget processing margin for interrupts, graphics or communications stacks, and safety monitoring rather than treating the stated 216 MHz maximum as sustained application performance. For new hardware, verify the complete STM32F765II datasheet, pin alternate-function matrix, memory map, power-consumption characteristics, and package tolerances before layout. Firmware development also depends on the selected toolchain, debugger, boot configuration, clock tree, and peripheral initialization library. The STM32F765IIT7 is supplied in a tray according to the verified distributor description, and the listed LCSC starting price was $21.8836 as of 2026-10-28. This product record combines the verified manufacturer specifications, distributor availability references, package details, and same-footprint comparison candidates. It also adds engineering-focused selection guidance, application context, and procurement information to provide more decision support than a basic distributor listing alone.

RFQ Contact
STM32F765NGH6 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F765NGH6

STM32F765NGH6 - 216MHz Cortex-M7 MCU | STMicroelectronics

STMicroelectronics STM32F765NGH6 is a high-performance 32-bit Arm Cortex-M7 microcontroller with FPU and DSP capability, operating up to 216 MHz and containing 1 MB of flash memory in a 216-pin TFBGA package measuring 13 x 13 mm. It uses a 3.3 V supply and is supplied in tray packaging according to the verified distributor data. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. The STM32F7 family belongs to the Arm Cortex-M microcontroller hierarchy, combining real-time embedded control, low-power operation, and extensive digital and analog peripherals. The STM32F765NGH6 is positioned for applications requiring greater processing throughput, external memory connectivity, and high-speed communications than typical entry-level Cortex-M devices. The verified manufacturer data identifies an Arm Cortex-M7 32-bit RISC core, a maximum operating frequency of 216 MHz, and 1 MB of flash. The family documentation states a score of up to 462 DMIPS. Its 216-pin TFBGA package exposes substantially more I/O than smaller leaded packages, allowing simultaneous use of communications, control, analog, and memory interfaces. Operating voltage is listed as 3.3 V, while detailed RAM, peripheral, temperature, and timing limits require confirmation in the manufacturer datasheet. Typical application areas include industrial automation, networked embedded equipment, data acquisition, human-machine interfaces, motor and motion control, and connected control systems. Its 216 MHz Cortex-M7 performance supports real-time signal processing and higher-level control tasks, while the large package provides extensive pin availability. Designers should confirm peripheral assignments, power requirements, and board-level interface support against the exact STM32F765NGH6 datasheet before layout release. A critical design consideration is BGA assembly. The 13 x 13 mm TFBGA package requires a PCB with suitable escape routing, via-in-pad or via-under-ball construction where appropriate, appropriate copper thermal and power distribution, and a manufacturing process capable of inspecting the solder joints. A fine-pitch MCU also benefits from short, properly referenced clock and high-speed signal paths. This page consolidates verified manufacturer and distributor facts, exact package information, commercial availability data, and same-family replacement candidates. It also distinguishes verified specifications from parameters that still require datasheet confirmation, helping engineers make a more reliable sourcing and design decision without treating generic STM32 family data as part-specific evidence.

RFQ Contact
STM32F765NGH7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F765NGH7

STM32F765NGH7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

STMicroelectronics STM32F765NGH7 is a 32-bit Arm Cortex-M7 microcontroller with a 216 MHz maximum operating frequency, 1 MB of flash memory, and a 216-TFBGA 13 x 13 mm package. The device includes a double-precision floating-point unit, ART Accelerator, 16 KB instruction and data caches, an MPU, and DSP instructions, supporting up to 462 DMIPS according to the manufacturer datasheet. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, data memory, peripherals, and communication interfaces on one package. The STM32F7 family belongs to the broader Arm Cortex-M microcontroller category, with the Cortex-M7 core using a 32-bit RISC architecture. This places the STM32F765NGH7 within the semiconductor and embedded-control device hierarchy for industrial, communications, consumer, and real-time control systems. Key features include a 216 MHz maximum clock, 1 MB of flash organized as 1M x 8, up to 462 DMIPS, a 16 KB L1 instruction cache, a 16 KB L1 data cache, an MPU, and DSP instructions. The 3 V operating supply identified in the verified product data is suitable for embedded systems designed around conventional 3.3 V rails. Its high-performance architecture supports computationally intensive control, communications, and signal-processing workloads. The Cortex-M7 core combines a 32-bit Arm architecture with a double-precision FPU and ART Accelerator. According to the manufacturer datasheet, the 16 KB instruction and data caches allow zero-wait-state execution from embedded flash and external memory. The MPU supports memory-protection and isolation functions, while DSP instructions accelerate suitable arithmetic operations. These capabilities distinguish this device from simpler Cortex-M3 or Cortex-M4 microcontrollers. Typical applications include industrial automation equipment, networked embedded controllers, communications infrastructure, audio and digital signal processing, and real-time control systems. Its 216 MHz performance and floating-point capability are useful when control loops or signal-processing tasks must execute without relying on a separate processor. The principal design consideration is the 216-ball BGA footprint. A new PCB layout must provide the required escape routing, via structure, power distribution, and assembly process for a 13 x 13 mm TFBGA. Firmware and peripheral configurations should be validated against the manufacturer datasheet before production release. This page consolidates verified manufacturer information, distributor pricing and availability, engineering selection guidance, and explicitly qualified replacement analysis. It distinguishes confirmed drop-in candidates from unavailable alternatives so procurement and design decisions can be made without treating general-purpose MCU alternatives as pin-compatible replacements.

RFQ Contact
STM32F765NGH7TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)
STM32F765NGH7TR

STM32F765NGH7TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM32F765NGH7TR is a 32-bit Arm Cortex-M7 microcontroller with a 216 MHz maximum operating frequency, 1 MB of flash memory, and a 216-TFBGA 13 x 13 mm package. The device includes a double-precision floating-point unit, ART Accelerator, 16 KB instruction and data caches, an MPU, and DSP instructions, supporting up to 462 DMIPS according to the manufacturer datasheet. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, data memory, peripherals, and communication interfaces on one package. The STM32F7 family belongs to the broader Arm Cortex-M microcontroller category, with the Cortex-M7 core using a 32-bit RISC architecture. This places the STM32F765NGH7TR within the semiconductor and embedded-control device hierarchy for industrial, communications, consumer, and real-time control systems. Key features include a 216 MHz maximum clock, 1 MB of flash organized as 1M x 8, up to 462 DMIPS, a 16 KB L1 instruction cache, a 16 KB L1 data cache, an MPU, and DSP instructions. The 3 V operating supply identified in the verified product data is suitable for embedded systems designed around conventional 3.3 V rails. Its high-performance architecture supports computationally intensive control, communications, and signal-processing workloads. The Cortex-M7 core combines a 32-bit Arm architecture with a double-precision FPU and ART Accelerator. According to the manufacturer datasheet, the 16 KB instruction and data caches allow zero-wait-state execution from embedded flash and external memory. The MPU supports memory-protection and isolation functions, while DSP instructions accelerate suitable arithmetic operations. These capabilities distinguish this device from simpler Cortex-M3 or Cortex-M4 microcontrollers. Typical applications include industrial automation equipment, networked embedded controllers, communications infrastructure, audio and digital signal processing, and real-time control systems. Its 216 MHz performance and floating-point capability are useful when control loops or signal-processing tasks must execute without relying on a separate processor. The principal design consideration is the 216-ball BGA footprint. A new PCB layout must provide the required escape routing, via structure, power distribution, and assembly process for a 13 x 13 mm TFBGA. Firmware and peripheral configurations should be validated against the manufacturer datasheet before production release. This page consolidates verified manufacturer information, distributor pricing and availability, engineering selection guidance, and explicitly qualified replacement analysis. It distinguishes confirmed drop-in candidates from unavailable alternatives so procurement and design decisions can be made without treating general-purpose MCU alternatives as pin-compatible replacements.

RFQ Contact
STM32F765NIH6 - 216MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics
STM32F765NIH6

STM32F765NIH6 - 216MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics

The STMicroelectronics STM32F765NIH6 is a 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 2 MB of flash memory, in a 216-TFBGA package measuring 13 x 13 mm. It belongs to the STM32F7 performance-oriented microcontroller family and combines a high-frequency CPU with extensive embedded memory and integrated peripherals. A microcontroller is a compact semiconductor system that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals such as timers, communication interfaces, and interrupt controllers. The STM32F7 family hierarchy is Arm Cortex-M7 processor core, embedded microcontroller, STM32 microcontroller, and semiconductor. This device is intended for embedded control systems requiring substantially more processing capability than typical low-cost Cortex-M microcontrollers. Verified source data identifies a 32-bit architecture, up to 216 MHz operation, and 2 MB organized as 2M x 8 of flash. The family datasheet also states 462 DMIPS and up to 2 MB of flash. Its high-performance positioning makes it relevant for industrial controllers, connected equipment, audio systems, and real-time user interfaces. Exact RAM, peripheral, voltage, and package-pin details are retained as data-needed fields rather than inferred from other STM32 devices. The Arm Cortex-M7 core uses a 32-bit RISC architecture and includes floating-point capability in the applicable STM32F7 family documentation. Unlike an application processor, the STM32F765NIH6 is designed around deterministic embedded control, firmware-driven peripherals, and compact real-time operation. Its 216 MHz ceiling provides headroom for protocol processing, control loops, and concurrent peripheral activity, although final performance depends on memory configuration, peripherals, and firmware. Typical applications include industrial automation, factory equipment, industrial networking, audio and signal processing, human-interface systems, and connected embedded products. The 2 MB program memory supports substantially larger firmware than entry-level MCUs, while the 216 MHz core can manage control calculations and communication tasks. Engineers should still budget SRAM, validate clock-tree configuration, and confirm every peripheral and pin assignment against the manufacturer datasheet. For PCB implementation, the 216-TFBGA package demands careful escape routing, uninterrupted supply distribution, and thermal-aware placement. Banked ground connections, short high-speed routes, and verified decoupling should be designed according to the datasheet layout guidance. Because the supplied sources do not publish the complete 216-ball pinout, exact ball names and functions are not asserted here. This product record combines verified manufacturer and distributor specifications, sourcing links, and honest data-gap markers. It does not infer unavailable electrical limits, pricing, pin assignments, or cross-brand replacements; those fields require confirmation before schematic release or production procurement.

RFQ Contact
STM32F765NIH6TR - 216MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics (Tape & Reel)
STM32F765NIH6TR

STM32F765NIH6TR - 216MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F765NIH6TR is a 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 2 MB of flash memory, in a 216-TFBGA package measuring 13 x 13 mm. It belongs to the STM32F7 performance-oriented microcontroller family and combines a high-frequency CPU with extensive embedded memory and integrated peripherals. A microcontroller is a compact semiconductor system that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals such as timers, communication interfaces, and interrupt controllers. The STM32F7 family hierarchy is Arm Cortex-M7 processor core, embedded microcontroller, STM32 microcontroller, and semiconductor. This device is intended for embedded control systems requiring substantially more processing capability than typical low-cost Cortex-M microcontrollers. Verified source data identifies a 32-bit architecture, up to 216 MHz operation, and 2 MB organized as 2M x 8 of flash. The family datasheet also states 462 DMIPS and up to 2 MB of flash. Its high-performance positioning makes it relevant for industrial controllers, connected equipment, audio systems, and real-time user interfaces. Exact RAM, peripheral, voltage, and package-pin details are retained as data-needed fields rather than inferred from other STM32 devices. The Arm Cortex-M7 core uses a 32-bit RISC architecture and includes floating-point capability in the applicable STM32F7 family documentation. Unlike an application processor, the STM32F765NIH6TR is designed around deterministic embedded control, firmware-driven peripherals, and compact real-time operation. Its 216 MHz ceiling provides headroom for protocol processing, control loops, and concurrent peripheral activity, although final performance depends on memory configuration, peripherals, and firmware. Typical applications include industrial automation, factory equipment, industrial networking, audio and signal processing, human-interface systems, and connected embedded products. The 2 MB program memory supports substantially larger firmware than entry-level MCUs, while the 216 MHz core can manage control calculations and communication tasks. Engineers should still budget SRAM, validate clock-tree configuration, and confirm every peripheral and pin assignment against the manufacturer datasheet. For PCB implementation, the 216-TFBGA package demands careful escape routing, uninterrupted supply distribution, and thermal-aware placement. Banked ground connections, short high-speed routes, and verified decoupling should be designed according to the datasheet layout guidance. Because the supplied sources do not publish the complete 216-ball pinout, exact ball names and functions are not asserted here. This product record combines verified manufacturer and distributor specifications, sourcing links, and honest data-gap markers. It does not infer unavailable electrical limits, pricing, pin assignments, or cross-brand replacements; those fields require confirmation before schematic release or production procurement.

RFQ Contact
STM32F765NIH7 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765NIH7

STM32F765NIH7 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

STMicroelectronics STM32F765NIH7 is a high-performance 32-bit Arm Cortex-M7 microcontroller with a maximum operating frequency of 216 MHz, 2 MB of internal Flash memory, and a 216-pin TFBGA package measuring 13 x 13 mm. It is designed for embedded applications requiring substantial processing performance, DSP capability, and extensive peripheral integration in a relatively compact surface-mount package. The device belongs to the STM32F7 family of Cortex-M7 microcontrollers and is positioned between general-purpose embedded control and higher-performance control applications. A Cortex-M7 microcontroller is a 32-bit reduced-instruction-computing processor commonly used for real-time control, communications, audio, graphics, and industrial automation. In the product hierarchy, STM32F765NIH7 is a microcontroller, embedded processor, semiconductor, and programmable control device. The STM32F7 family combines a high-performance CPU core with dedicated Flash, SRAM, communication interfaces, timers, and analog peripherals within one integrated package. The verified product information identifies an Arm Cortex-M7 core operating at up to 216 MHz, 2 MB of Flash organized as 2M x 8 bits, and a 216-TFBGA package. The manufacturer describes the STM32F765xx family as a high-performance 32-bit MCU with FPU and DSP capability. The 216 MHz operating point is useful for computationally intensive control loops, digital signal processing, human-machine interfaces, and connected industrial equipment. The large 2 MB Flash capacity provides room for substantial application code, firmware updates, and embedded assets. The STM32F765NIH7 combines CPU performance with the integration expected from a mixed-signal embedded platform. Its Cortex-M7 architecture can accelerate code containing intensive arithmetic, filtering, and control operations, while integrated peripherals reduce the need for external interface devices. Because the supplied distributor and manufacturer excerpts do not enumerate the complete peripheral set, specific peripheral counts, SRAM capacity, operating-temperature limits, and maximum I/O specifications should be confirmed in the manufacturer datasheet before design release. Typical uses include industrial automation, motor and motion control, communications equipment, audio and digital signal processing, test and measurement instruments, and high-end human-machine interfaces. In these systems, the 216 MHz core provides processing headroom for concurrent control and communication tasks, while the 2 MB Flash budget accommodates larger embedded applications. The 13 x 13 mm TFBGA package can support dense designs but demands careful PCB layout and assembly planning because its ball pitch and thermal characteristics differ from leaded packages. Designers should prioritize the manufacturer's reference schematic, pin multiplexing guidance, decoupling requirements, clock configuration, and exposed-pad recommendations when laying out a new board. Because this exact 216-ball package is not represented in the available package-diagram library, no verified pin-level diagram is asserted here. Firmware, bootloader behavior, memory organization, and peripheral availability must also be checked against the exact STM32F765NIH7 ordering code and its applicable device datasheet. This page consolidates verified manufacturer and distributor information, distinguishes confirmed specifications from fields requiring datasheet review, and explains the engineering trade-offs associated with a high-speed Cortex-M7 MCU in a compact 216-pin TFBGA. It also provides practical sourcing guidance and a conservative drop-in assessment rather than presenting unverified substitutes as direct replacements.

RFQ Contact
STM32F765VGH6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F765VGH6

STM32F765VGH6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

STMicroelectronics STM32F765VGH6 is a high-performance 32-bit Arm Cortex-M7 microcontroller with a 216 MHz operating frequency, 1 MB of embedded Flash, and a 100-pin TFBGA package measuring 8 x 8 mm. It combines a double-precision FPU, DSP instructions, an ART Accelerator, and a 16 KB L1 cache for high-performance embedded control. The MCU also provides SDRAM and DFSDM support, making it suitable for signal processing, communications, audio, industrial control, and connected equipment. An Arm Cortex-M7 MCU is a 32-bit RISC processor within the embedded microcontroller and semiconductor hierarchy. Its floating-point and DSP capabilities accelerate mathematical and signal-processing workloads while retaining the deterministic control characteristics expected from a microcontroller. The STM32F765VGH6 specifically combines that processing performance with 1 MB of Flash for firmware and 3.3 V operation in a compact surface-mount package. Key features include operation up to 216 MHz, 462 DMIPS, a double-precision floating-point unit, dedicated DSP instructions, and 16 KB of combined instruction/data L1 cache. The ART Accelerator provides accelerated Flash access, while the memory-protection unit supports controlled memory access. Integrated SDRAM support adds flexibility for systems requiring external memory, and the DFSDM peripheral targets applications requiring efficient digital conversion and filtering. Technically, the STM32F765VGH6 is positioned for performance-oriented embedded systems where a Cortex-M7 core, substantial program memory, and a broad set of peripherals must coexist within one device. Its 100-lead TFBGA arrangement supports compact PCB layouts, but the fine-pitch land pattern requires careful escape routing, assembly-profile control, and inspection during production. The manufacturer datasheet remains the controlling reference for pin functions, electrical limits, and package details. Typical uses include industrial automation, communications equipment, audio and digital signal processing, motor and motion control, test equipment, and embedded user interfaces. The 216 MHz Cortex-M7 performance and DSP capability benefit workloads with real-time sampling or control loops, while 1 MB of Flash can accommodate substantial application code, drivers, protocol stacks, and a bootloader. Designers should verify the complete TFBGA-100 footprint, pin multiplexing, exposed-pad requirements, recommended decoupling, and operating limits against the STMicroelectronics datasheet before layout release. Firmware also requires the appropriate startup code, clock configuration, memory initialization, and peripheral pin assignments. Because the 100-pin package provides many parallel and high-speed functions, signal-integrity and manufacturing reviews should be completed before high-volume production. This product page consolidates verified manufacturer and distributor information, package and memory characteristics, commercially focused sourcing questions, same-family drop-in alternatives, and practical design guidance. It also distinguishes confirmed specifications from parameters that require confirmation in the full manufacturer datasheet.

RFQ Contact
STM32F765VGH6TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)
STM32F765VGH6TR

STM32F765VGH6TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM32F765VGH6TR is a high-performance 32-bit Arm Cortex-M7 microcontroller with a 216 MHz operating frequency, 1 MB of embedded Flash, and a 100-pin TFBGA package measuring 8 x 8 mm. It combines a double-precision FPU, DSP instructions, an ART Accelerator, and a 16 KB L1 cache for high-performance embedded control. The MCU also provides SDRAM and DFSDM support, making it suitable for signal processing, communications, audio, industrial control, and connected equipment. An Arm Cortex-M7 MCU is a 32-bit RISC processor within the embedded microcontroller and semiconductor hierarchy. Its floating-point and DSP capabilities accelerate mathematical and signal-processing workloads while retaining the deterministic control characteristics expected from a microcontroller. The STM32F765VGH6TR specifically combines that processing performance with 1 MB of Flash for firmware and 3.3 V operation in a compact surface-mount package. Key features include operation up to 216 MHz, 462 DMIPS, a double-precision floating-point unit, dedicated DSP instructions, and 16 KB of combined instruction/data L1 cache. The ART Accelerator provides accelerated Flash access, while the memory-protection unit supports controlled memory access. Integrated SDRAM support adds flexibility for systems requiring external memory, and the DFSDM peripheral targets applications requiring efficient digital conversion and filtering. Technically, the STM32F765VGH6TR is positioned for performance-oriented embedded systems where a Cortex-M7 core, substantial program memory, and a broad set of peripherals must coexist within one device. Its 100-lead TFBGA arrangement supports compact PCB layouts, but the fine-pitch land pattern requires careful escape routing, assembly-profile control, and inspection during production. The manufacturer datasheet remains the controlling reference for pin functions, electrical limits, and package details. Typical uses include industrial automation, communications equipment, audio and digital signal processing, motor and motion control, test equipment, and embedded user interfaces. The 216 MHz Cortex-M7 performance and DSP capability benefit workloads with real-time sampling or control loops, while 1 MB of Flash can accommodate substantial application code, drivers, protocol stacks, and a bootloader. Designers should verify the complete TFBGA-100 footprint, pin multiplexing, exposed-pad requirements, recommended decoupling, and operating limits against the STMicroelectronics datasheet before layout release. Firmware also requires the appropriate startup code, clock configuration, memory initialization, and peripheral pin assignments. Because the 100-pin package provides many parallel and high-speed functions, signal-integrity and manufacturing reviews should be completed before high-volume production. This product page consolidates verified manufacturer and distributor information, package and memory characteristics, commercially focused sourcing questions, same-family drop-in alternatives, and practical design guidance. It also distinguishes confirmed specifications from parameters that require confirmation in the full manufacturer datasheet.

RFQ Contact
STM32F765VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F765VGT6

STM32F765VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F765VGT6 is a 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of Flash memory in a 100-LQFP 14 x 14 mm package. Its 462 DMIPS performance and DSP-oriented processing make it suitable for industrial control, communications, audio, and embedded systems requiring higher real-time throughput than typical entry-level Cortex-M devices. A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F7 family belongs to the Arm Cortex-M embedded-computing hierarchy and provides integrated flash, SRAM, timers, GPIO, serial interfaces, and communication peripherals. The STM32F765VGT6 combines this embedded integration with a high-performance Cortex-M7 core and hardware caches designed to reduce execution stalls. Key verified features include up to 216 MHz operating frequency, 1 MB (1M x 8) Flash memory, a 32-bit Arm Cortex-M7 core, and a 100-LQFP package. The Cortex-M7 core includes the features identified in the provided technical data: an FPU, DSP instructions, MPU support, ART Accelerator, and separate instruction and data caches. The verified core performance is 462 DMIPS, equivalent to 2.14 DMIPS/MHz using Dhrystone 2.1. The device is positioned for applications that benefit from fast control-loop execution and substantial embedded Flash while retaining a compact 100-pin surface-mount footprint. Its package provides more external connectivity than smaller STM32 packages, allowing designers to connect multiple peripherals without moving to a higher pin-count device. Exact RAM size, voltage range, peripheral inventory, and electrical limits were not provided in the verified data and are therefore not inferred here. Typical design uses include industrial automation, motor and motion control, communications gateways, audio signal processing, data acquisition, and connected embedded equipment. In each case, firmware should use the STM32CubeMX and STM32CubeIDE ecosystems for peripheral configuration and should validate pin multiplexing, clock settings, and peripheral electrical limits against the manufacturer datasheet before production. A key design consideration is ensuring that the selected board, power supply, clock, and decoupling implementation match the device requirements. The 100-LQFP package should be laid out with controlled trace geometry and adequate ground-plane continuity; however, exact recommended capacitor values and routing dimensions require the complete manufacturer datasheet, which was not included in the supplied specification data. This page consolidates the verified manufacturer identity, core frequency, memory configuration, package, pricing references, source links, and engineering comparison points in one searchable record. Values not explicitly present in the verified data remain marked for review rather than being guessed.

RFQ Contact
STM32F765VGT6TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)
STM32F765VGT6TR

STM32F765VGT6TR - 216MHz Cortex-M7 1MB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F765VGT6TR is a 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of Flash memory in a 100-LQFP 14 x 14 mm package. Its 462 DMIPS performance and DSP-oriented processing make it suitable for industrial control, communications, audio, and embedded systems requiring higher real-time throughput than typical entry-level Cortex-M devices. A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F7 family belongs to the Arm Cortex-M embedded-computing hierarchy and provides integrated flash, SRAM, timers, GPIO, serial interfaces, and communication peripherals. The STM32F765VGT6TR combines this embedded integration with a high-performance Cortex-M7 core and hardware caches designed to reduce execution stalls. Key verified features include up to 216 MHz operating frequency, 1 MB (1M x 8) Flash memory, a 32-bit Arm Cortex-M7 core, and a 100-LQFP package. The Cortex-M7 core includes the features identified in the provided technical data: an FPU, DSP instructions, MPU support, ART Accelerator, and separate instruction and data caches. The verified core performance is 462 DMIPS, equivalent to 2.14 DMIPS/MHz using Dhrystone 2.1. The device is positioned for applications that benefit from fast control-loop execution and substantial embedded Flash while retaining a compact 100-pin surface-mount footprint. Its package provides more external connectivity than smaller STM32 packages, allowing designers to connect multiple peripherals without moving to a higher pin-count device. Exact RAM size, voltage range, peripheral inventory, and electrical limits were not provided in the verified data and are therefore not inferred here. Typical design uses include industrial automation, motor and motion control, communications gateways, audio signal processing, data acquisition, and connected embedded equipment. In each case, firmware should use the STM32CubeMX and STM32CubeIDE ecosystems for peripheral configuration and should validate pin multiplexing, clock settings, and peripheral electrical limits against the manufacturer datasheet before production. A key design consideration is ensuring that the selected board, power supply, clock, and decoupling implementation match the device requirements. The 100-LQFP package should be laid out with controlled trace geometry and adequate ground-plane continuity; however, exact recommended capacitor values and routing dimensions require the complete manufacturer datasheet, which was not included in the supplied specification data. This page consolidates the verified manufacturer identity, core frequency, memory configuration, package, pricing references, source links, and engineering comparison points in one searchable record. Values not explicitly present in the verified data remain marked for review rather than being guessed.

RFQ Contact
STM32F765VGT7 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F765VGT7

STM32F765VGT7 - 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F765VGT7 is an Arm Cortex-M7 32-bit microcontroller operating up to 216 MHz, with 1 MB of Flash memory and a 100-LQFP package measuring 14 mm by 14 mm. It combines the MCU, MCU+FPU category, and Cortex-M7 performance class in one embedded device. A microcontroller is a programmable system-on-chip used to supervise sensors, communications, actuators, and user interfaces. The STM32F7 family combines a high-performance CPU core with embedded memory, peripherals, and external-memory interfaces. The Cortex-M7 architecture includes DSP instructions and an FPU, while the ART Accelerator and L1 cache support efficient execution from embedded Flash and external memories. The verified data identifies a 216 MHz operating frequency, 1 MB of Flash organized as 1M x 8, 16 KB of instruction and data L1 cache, an ART Accelerator, 462 DMIPS under Dhrystone 2.1, and an FPU. The device also supports SDRAM and DFSDM, according to the supplied technical search results. These features position it for real-time control, communications, industrial equipment, IoT, and embedded automation. This device is useful when an embedded design requires substantially more processing capability than a basic Cortex-M class MCU. The Cortex-M7 core can handle signal processing, protocol management, control loops, and user-interface logic, while the 1 MB Flash capacity provides room for application firmware. The 100-LQFP package offers a conventional leaded footprint for prototype and production assembly. Typical applications include industrial controllers, motor-control systems, communications equipment, data acquisition, IoT gateways, and low-power embedded systems. The STM32F765VGT7 should be selected only when the system requires its verified 216 MHz Cortex-M7 performance, 1 MB Flash configuration, and 100-LQFP footprint. Designers must confirm peripheral assignments, pin multiplexing, voltage limits, clocking, memory requirements, and package-level details against the official STMicroelectronics documentation. For new layouts, preserve the defined 100-LQFP footprint, validate all peripheral pins before routing, and provide the required decoupling and clock circuitry specified in the manufacturer documentation. This page combines verified manufacturer and distributor information with engineering-oriented application guidance; unavailable package, electrical, and lifecycle details are marked for data completion rather than inferred.

RFQ Contact
STM32F765VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST
STM32F765VIH6

STM32F765VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST

The STMicroelectronics STM32F765VIH6 is a high-performance 32-bit microcontroller based on the Arm Cortex-M7 core operating at up to 216 MHz, with 2 MB of Flash memory, 462 DMIPS of processing performance, and an 8x8 mm 100-ball TFBGA package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals onto one die, serving as the computational heart of embedded systems. Within the system hierarchy, the STM32F765 belongs to the STM32F7 Series of high-performance MCUs, which sits above mainstream Cortex-M4 families and below multicore application processors, making it the workhorse choice for demanding real-time embedded control. Key features include the Arm Cortex-M7 core with double-precision FPU and Armv7E-M DSP instructions, the adaptive real-time (Art) memory accelerator that achieves 0-wait-state execution from Flash at 216 MHz, and L1 instruction and data caches that maximize performance from external memory. Peripherals include SDRAM interface support, DFSDM (digital filter for sigma-delta modulators), multiple high-speed communication interfaces, and advanced analog blocks suitable for motor control and digital power. Architecturally, the Art Accelerator and 16-Kbyte L1 instruction cache allow the Cortex-M7 to sustain its full 1082 CoreMark/MHz-class throughput even when fetching from on-chip Flash, a key differentiator from earlier Cortex-M families that required SRAM execution for peak performance. The double-precision FPU accelerates scientific and signal-processing math natively without software emulation. Typical applications include industrial motor drives and digital power conversion (leveraging DFSDM and high-resolution timers), medical and test instrumentation requiring 216 MHz DSP throughput, and high-end consumer devices with graphical displays driven via SDRAM and LCD interfaces. A key design consideration: the TFBGA package demands careful PCB design with controlled-impedance fanout, and the low core voltage is generated by an embedded regulator, so follow ST layout guidelines for VCAP capacitors and decoupling. This page synthesizes distributor pricing, verified drop-in alternatives, design guidance, and application notes not consolidated in the manufacturer datasheet.

RFQ Contact