Products (44,000+)

XC3S1000-4FT256I - 1M Gate Spartan-3 FPGA | AMD
XC3S1000-4FT256I

XC3S1000-4FT256I - 1M Gate Spartan-3 FPGA | AMD

The AMD XC3S1000-4FT256I is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 1,920 logic array blocks, and 173 user I/Os. The device operates from a 1.2 V core supply and has a 630 MHz performance rating. It is packaged in a 256-ball fine-pitch ball grid array designated FT256. A field-programmable gate array, or FPGA, is a programmable digital logic device within the broader semiconductor and configurable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel processing, control, interface, and signal-processing logic in a reconfigurable device. The Spartan-3 architecture combines logic cells, dedicated block RAM, digital signal processing resources, and programmable I/O within one integrated circuit. The XC3S1000-4FT256I provides 432 kbit of embedded memory according to the manufacturer family documentation. Its -4 speed designation identifies the device performance class, while the I suffix identifies the industrial-temperature ordering option. A 256-ball FTBGA package supports dense PCB routing and is suitable for compact control, communications, instrumentation, and embedded-processing systems where many external signals must terminate on a programmable device. Within the Spartan-3 family, this device provides 173 user I/Os and up to 630 MHz device performance. The programmable architecture permits design changes without changing the PCB, while dedicated block RAM supports buffering, packet storage, and moderate-width data paths. The 1.2 V core operating point reduces core power relative to earlier-generation programmable devices, although total board power still depends on I/O activity, configuration resources, and the selected design. Typical uses include industrial automation, embedded control, data acquisition, communications interfaces, and low-cost digital signal processing. The combination of 17,280 logic elements and 173 I/Os allows one device to consolidate several discrete logic functions. Designs requiring more memory, higher I/O density, or a newer migration path should be evaluated against larger Spartan-3 variants or later AMD FPGA families before PCB release. The FT256 package requires careful power, ground, and signal-integrity planning. Follow the Spartan-3 family datasheet for decoupling, configuration, clocking, and package-ball guidance, and validate every board with the completed design rather than relying only on theoretical resource counts. Confirm that the assembled board, manufacturing process, and operating environment remain compatible with the industrial-grade ordering option.

RFQ Contact
XC3S1000-5FG320C - 1M-Gate Spartan-3 FPGA | Xilinx
XC3S1000-5FG320C

XC3S1000-5FG320C - 1M-Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-5FG320C is a 1-million-system-gate Spartan-3 field-programmable gate array with 17,280 logic cells, 221 I/O, and 442,368 bits of block RAM. It operates from a 1.2 V core supply, uses 90 nm FPGA technology, and is packaged in a 320-pin fine-pitch ball grid array for surface mounting. An FPGA is a semiconductor whose digital logic, interconnect, memory, and I/O behavior are configured through a programmable bitstream. Within the product hierarchy, the XC3S1000 belongs to the Spartan-3 FPGA family, joining programmable logic devices and field-programmable gate arrays within the broader integrated-circuit and semiconductor categories. This makes it appropriate when a design needs hardware parallelism, reconfigurable interfaces, or dedicated logic rather than a software-controlled processor. The device provides 725 MHz maximum performance and 17,280 configurable logic cells. Its 442,368 bits of block RAM support buffering, data storage, and parallel processing, while 221 I/O pins provide extensive connectivity for external memories, control signals, communications, and mixed-signal interfaces. The 320-FBGA package supports compact, high-density PCB layouts but requires careful escape routing and fine-pitch assembly capability. The XC3S1000 architecture is designed for implementation of parallel data paths, protocol bridges, control logic, embedded memory structures, and general-purpose programmable logic. Performance depends on clocking, routing, resource utilization, and the selected FPGA design. A bitstream generated for the correct device, package, speed grade, and configuration settings is essential for reliable operation. Typical applications include industrial automation controllers, networking and communications equipment, test and measurement systems, embedded video processing, sensor acquisition, and legacy interface conversion. The large I/O count and on-chip RAM make the device useful where several external interfaces and parallel data operations must coexist on one device. Design planning should account for the fine-pitch BGA footprint, power decoupling, clock jitter, I/O standards, configuration memory, and thermal performance. PCB signal-integrity analysis is particularly important for high-speed interfaces, while careful bank and voltage planning prevents incompatible I/O standards from being assigned to the same power domain. This page combines the device specifications with application guidance, engineering design notes, and pin-compatible Spartan-3 alternatives. It also highlights where speed grade, temperature grade, and device revision choices affect replacement decisions without overlooking the constraints of an existing 320-ball PCB layout.

RFQ Contact
XC3S1000-5FG456C - 1M Spartan-3 FPGA, 456-BBGA | AMD
XC3S1000-5FG456C

XC3S1000-5FG456C - 1M Spartan-3 FPGA, 456-BBGA | AMD

The AMD XC3S1000-5FG456C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 333 I/O interfaces, and a 1.2 V supply in a 456-ball FBGA package. It is a 90 nm programmable logic device built for cost-sensitive embedded systems requiring substantial logic, memory, and parallel I/O capacity. The -5 speed grade and FG456 package identify this configuration as the commercial-temperature, 456-ball member of the Spartan-3 family. An FPGA is a programmable semiconductor whose internal logic, routing, and I/O resources are configured after manufacture. Within the product hierarchy, this device is a field-programmable gate array, part of the broader class of programmable logic devices and integrated circuits. This architecture allows one board design to support multiple hardware functions, shorten development cycles, and support field upgrades through a programmable configuration bitstream. The XC3S1000-5FG456C provides 17,280 logic elements distributed across 1,920 configurable logic blocks, with 7,680 adaptive logic modules and 432 embedded-memory bits identified for this device. Its 333 user I/O interfaces support communication with external processors, memory, converters, and industrial peripherals. A listed maximum clock frequency of 725 MHz describes a headline device capability; actual system performance still depends on the selected design, speed grade, clocking scheme, and timing constraints. The device uses a low 1.2 V operating supply and 90 nm process technology. These characteristics place it in the Spartan-3 generation, which combined a large gate count with a cost-oriented architecture for volume embedded applications. Its ball-grid package concentrates a high pin count into a compact 23 mm by 23 mm square footprint while supporting a 1.00 mm terminal pitch. Typical applications include industrial control, data acquisition, communications infrastructure, embedded instrumentation, video processing, and legacy platform control. The large I/O count is especially useful when a design must bridge multiple buses, capture parallel sensor data, or connect directly to high-speed external logic without requiring another programmable device. For a new PCB layout, use the manufacturer pinout and package-mechanical guidance for the exact FG456 ball map. Existing designs should be checked for voltage, temperature, timing, configuration-interface, and pinout compatibility before substituting any speed- or temperature-grade variant. Configuration storage, clocking, decoupling, and signal-integrity requirements must also follow the Spartan-3 design guidance.

RFQ Contact
XC3S1000-5FG676C - 1M Gate 676-BGA Spartan-3 FPGA | AMD
XC3S1000-5FG676C

XC3S1000-5FG676C - 1M Gate 676-BGA Spartan-3 FPGA | AMD

AMD XC3S1000-5FG676C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, and 391 user I/Os, packaged in a 676-ball fine-pitch BGA. It operates from a 1.2 V core supply and is manufactured using 90 nm CMOS technology. The device combines programmable logic, dedicated block RAM, and a broad user-I/O interface in a 27 mm by 27 mm surface-mount package. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and interconnect resources are configured after manufacture. In the broader hierarchy, an FPGA belongs to programmable logic devices, alongside complex programmable logic devices, and operates as a configurable element within an embedded control or signal-processing system. This flexibility allows one physical device to implement multiple hardware functions and supports product revisions without changing the printed circuit board. The Spartan-3 architecture provides 442,368 total RAM bits alongside 17,280 logic cells. Its 391 user I/Os support integration with external memory, converters, clocks, communications links, and control peripherals. The -5 speed designation identifies the device's performance grade, while the C suffix denotes the commercial temperature grade associated with an operating range of 0°C to 85°C. The 676-ball FBGA package supports dense board routing while requiring careful escape routing and multilayer PCB construction. Technical complexity increases with the number of available logic and I/O resources. Designers must account for clock-domain constraints, supported I/O standards, memory bandwidth, pin placement, and the finite routing capacity of the selected FPGA. Configuration data controls the implemented circuit, so the bitstream, configuration interface, clock source, startup behavior, and reset strategy should be validated as one complete design rather than treated as isolated device features. Typical uses include industrial automation, communications equipment, embedded video control, test and measurement, and general-purpose digital signal processing. In an industrial controller, the FPGA can combine parallel interface logic, protocol conversion, and deterministic sampling in one device. In communications equipment, the same programmable fabric can adapt to different framing and signaling requirements while providing 442,368 RAM bits for buffering or packet processing. PCB implementation is the principal practical consideration for this 676-ball package. Use a board stackup that supports the required escape-routing density, place decoupling close to every supply ball, and follow the manufacturer's ball-map and layout guidance for power, ground, and configuration pins. Confirm the selected footprint and pin assignments against the package drawing before releasing the design. This product page combines the device specifications, same-footprint replacement options, engineering guidance, application fit, and package-related constraints into a practical engineering reference. It also distinguishes exact published attributes from parameters that still require confirmation before schematic or PCB sign-off.

RFQ Contact
XC3S1000-5FT256C - 1M Gate Spartan-3 FPGA | Xilinx
XC3S1000-5FT256C

XC3S1000-5FT256C - 1M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-5FT256C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 442,368 RAM bits, and 173 user I/O in a 256-ball FTFBGA package. Its core supply operates from 1.14 V to 1.26 V, while the -5 speed designation identifies the device’s performance grade. A field-programmable gate array is a semiconductor whose digital logic, memory blocks, and I/O paths are configured after fabrication. The Spartan-3 FPGA family occupies the hierarchy FPGA, programmable logic device, configurable logic, and semiconductor. This makes the XC3S1000-5FT256C suitable for designs requiring parallel logic, embedded block RAM, programmable interfaces, and field-updatable configurations. Key features include 17,280 logic cells, 442,368 total RAM bits, 1,000,000 system gates, and 173 user I/O. The -5 suffix denotes a specific speed grade, while the FT256C package designation identifies a 256-ball fine-pitch plastic ball-grid-array configuration. These resources support concurrent control logic, data buffering, interface bridging, and protocol-specific state machines without relying on multiple discrete programmable devices. The device is based on the Spartan-3 FPGA architecture and provides 1,920 slices as reported by the product listing. Distributed RAM and dedicated block RAM make it useful for small embedded memories, data pipelines, lookup tables, and temporary packet storage. Its 173 available I/O provide broad connectivity for external memory, clocks, serial links, and control signals, although each interface must still be assigned within the device’s supported electrical and timing constraints. Typical uses include industrial control, telecommunications equipment, data-acquisition systems, embedded instrumentation, and legacy network-interface designs. Its 1M-gate architecture can consolidate parallel control and datapath functions into one package, while the substantial I/O count supports board-level integration with processors, memory devices, transceivers, and custom interface logic. Design planning must account for the FTFBGA package’s fine pitch, differential-pair routing, via-in-pad and solder-mask requirements, and the very large exposed BGA footprint. Signal integrity, decoupling, configuration-memory implementation, and bank-specific I/O constraints should be reviewed against the manufacturer’s Spartan-3 design guidance before schematic or layout signoff. This product record combines the exact XC3S1000-5FT256C package and resource details with practical implementation guidance, speed-grade alternatives, and parameter-by-parameter comparison information. It is intended to help engineers identify a configuration-compatible Spartan-3 option and plan the PCB, toolchain, and interface requirements for a maintainable FPGA platform.

RFQ Contact
XC3S100E-4TQ144I - 2,160-Cell Spartan-3E FPGA | Xilinx
XC3S100E-4TQ144I

XC3S100E-4TQ144I - 2,160-Cell Spartan-3E FPGA | Xilinx

The Xilinx XC3S100E-4TQ144I is a Spartan-3E field-programmable gate array with 2,160 logic cells, 240 logic blocks, 73,728 RAM bits, and 108 user I/O pins. It operates from a nominal 1.2 V core supply, supports a 1.14 V to 1.26 V voltage range, and is packaged in a 144-pin TQFP. The -4 speed grade supports operation up to 572 MHz. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O behavior can be configured after manufacture. The XC3S100E belongs to the Spartan-3E FPGA family, which sits within the broader hierarchy of FPGA, programmable logic, digital semiconductor, and embedded-electronics components. This makes it suitable for designs requiring parallel logic, control, data acquisition, interface bridging, or programmable signal processing. The device provides 50,000 system gates and 2,160 logic cells, providing a practical capacity for control logic, protocol interfaces, state machines, and small embedded signal-processing functions. Its 73,728 RAM bits can support data buffering, packet storage, lookup tables, and configuration or working memory. The 108 user I/O pins give a system designer substantial connectivity for buses, counters, serial links, and external data acquisition devices. The XC3S100E-4TQ144I uses a 1.2 V CMOS core and is specified for an industrial temperature range of -40°C to +100°C. The -4 designation identifies its performance grade, while the 144-pin TQFP package provides a conventional leaded surface-mount format with exposed thermal and thermal-pad considerations that must be handled according to the package drawing. Its 90 nm Spartan-3E process generation emphasizes low-cost programmable logic rather than the very high performance of larger modern FPGA families. Typical applications include industrial control and automation, data-acquisition front ends, communications protocol converters, embedded test equipment, instrumentation, and compact embedded-processing subsystems. The device can implement parallel-to-serial conversion, FIFO-based data movement, state-machine control, and custom peripheral functions while allowing firmware or logic revisions without changing the PCB. When assigning this FPGA, verify the exact pin assignments, bank supply requirements, configuration interface, clock topology, and I/O standards against the Spartan-3E family data sheet. The industrial temperature grade makes the part appropriate for temperature-challenged equipment, but the legacy 90 nm process and 2,160-cell limit should be considered against system timing, memory, and current design requirements. This product record combines manufacturer-family technical data with practical distinctions between temperature-grade, lead-free, and extended-temperature ordering variants. It also documents drop-in footprint considerations, configuration and design guidance, and application-specific fit so engineers can evaluate the XC3S100E-4TQ144I against other 144-pin Spartan-3E devices before committing to a design.

RFQ Contact
XC3S100E-5TQ144C - Spartan-3E 100K FPGA | AMD
XC3S100E-5TQ144C

XC3S100E-5TQ144C - Spartan-3E 100K FPGA | AMD

The AMD XC3S100E-5TQ144C is a Spartan-3E field-programmable gate array with 2,160 logic cells, 108 user I/O pins, and 73,728 RAM bits in a 144-pin TQFP package. The -5 speed grade operates with a 1.14 V to 1.26 V core supply and is positioned for designs requiring up to 657 MHz device performance. A field-programmable gate array is a configurable digital semiconductor whose logic, memory, and I/O can be programmed after fabrication. The FPGA hierarchy extends from configurable logic blocks and look-up tables through the Spartan-3E family to the broader FPGA and programmable-logic-device categories. This flexibility allows one physical package to support multiple interfaces, control functions, and signal-processing implementations. Key device resources include 2,160 logic cells, 240 logic array blocks, 108 user I/O pins, and 73,728 RAM bits. The 144-lead surface-mount package provides substantially more I/O than the smaller Spartan-3E package options. The listed operating temperature range of 0°C to 85°C suits commercial equipment, while the C designation identifies the commercial product grade. The Spartan-3E architecture combines programmable logic, dedicated block RAM, and configurable I/O in a single CMOS device. Its 90 nm CMOS implementation is identified in the manufacturer-family documentation, while the -5 suffix denotes the performance grade used in the ordering code. Engineers should distinguish the device's maximum characterized clock frequency from the frequency actually achievable by a specific design, because routing, timing constraints, logic utilization, and I/O requirements determine the final operating point. Typical uses include industrial control, embedded instrumentation, communication interfaces, digital signal conditioning, and compact embedded systems. The 108 available user I/O positions are especially useful for parallel buses, status and control signals, counters, and multi-channel acquisition systems. The 73,728 RAM bits also permit local buffering, packet storage, counters, and small state-machine implementations without depending entirely on external memory. A critical design consideration is the limited I/O voltage relationship of this legacy FPGA family. Confirm the bank-specific supply requirements, decoupling, clock topology, configuration source, and termination network against the Spartan-3E datasheet before layout release. A 144-pin TQFP also demands careful escape routing between its 0.5 mm pitch leads, so a stable multilayer stack-up and adequate ground-plane continuity are important. This product page combines verified device parameters, same-package replacement options, application guidance, and design-focused comparison information. It also highlights which characteristics are confirmed for the exact XC3S100E-5TQ144C ordering code and which engineering details must be checked in the Spartan-3E documentation before a new board is released.

RFQ Contact
XC3S1500-4FG320C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG320C

XC3S1500-4FG320C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG320C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 total cells, a maximum clock frequency of 630 MHz, and a 1.2 V nominal supply in a 320-pin flip-chip ball grid array package. The device provides 221 user I/O pins for programmable digital logic, control, signal processing, and communication functions. A field-programmable gate array is a semiconductor IC whose digital behavior is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, block RAM, dedicated I/O, and clocking resources. The Spartan-3 family occupies the FPGA and CPLD segment of the broader semiconductor market and is intended for designs requiring substantial parallel processing without the cost of application-specific integrated circuit development. The XC3S1500-4FG320C offers a 1.2 V core supply, a permitted supply range of 1.14 V to 1.26 V, and 90 nm CMOS process technology. Its 29,952 cells provide substantially more logic capacity than smaller CPLDs, while 221 I/O pins support interfaces to memory, converters, transceivers, and control peripherals. The -4 speed designation is associated with a maximum clock frequency of 630 MHz in the device listing. Programmable logic in the Spartan-3 architecture can implement parallel datapaths, state machines, protocol bridges, and fixed-function accelerators. Dedicated memory and I/O resources allow multiple data paths to operate concurrently, while clock-management features support deterministic internal timing. Exact RAM quantities, supported I/O standards, configuration interfaces, and pin functions must be confirmed in the AMD Spartan-3 family data sheet before final board design. Typical uses include industrial automation and machine vision, embedded communications, video and image processing, data acquisition, networking equipment, and cost-sensitive digital control. The XC3S1500-4FG320C is particularly appropriate when a design needs substantially more parallelism than a small CPLD but does not require the resources or power envelope of a larger high-end FPGA. PCB planning must account for the dense 320-ball FBGA footprint, controlled-impedance routing, decoupling near the core and I/O supplies, and proper configuration-memory interface layout. Designers should follow the AMD package pinout and recommended-layout guidance, validate signal integrity across every implemented I/O standard, and confirm thermal performance at the highest expected junction temperature. This product record combines the core electrical, logic-capacity, packaging, and environmental characteristics with practical selection guidance, application context, and package-aware alternatives. It also highlights the distinction between the commercial-grade -4FG320C device and related lower-power or extended-temperature family members.

RFQ Contact
XC3S1500-4FG320I - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG320I

XC3S1500-4FG320I - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG320I is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 3,328 configurable logic blocks and 221 I/O sites in a 320-ball BGA package. It operates from a 1.2 V core supply and is ordered with the -4 speed grade and industrial temperature designation. The XC3S1500-4FG320I provides the logic capacity and pin count required for embedded control, parallel processing, communications, industrial automation and test-equipment designs. A field-programmable gate array, or FPGA, is a programmable digital semiconductor in which configurable logic blocks and programmable interconnect resources implement a designer's circuit after manufacture. In the product hierarchy, an FPGA is a programmable logic device, a semiconductor and an integrated circuit. Unlike a fixed-function ASIC, an FPGA permits design revisions, parallel logic implementation and system adaptation without fabricating a new custom silicon mask set. The 3,328 configurable logic blocks provide the physical foundation for combinational and sequential logic in the Spartan-3 architecture. Its 1.5 million system-gate figure describes the device's broad logic capacity, while 221 I/O sites support connections to external memory, data converters, communications transceivers and control peripherals. The 320-ball BGA package offers dense board-level connectivity for complex systems with numerous high-speed and parallel signals. The -4 portion of the ordering code identifies a specific performance grade, while the I suffix identifies the industrial temperature option. These suffixes are functionally important when replacing or upgrading an FPGA: the package, speed grade, temperature range and power configuration must all be checked against the original design. The Spartan-3 generation is established for programmable embedded systems and remains recognizable through its combination of substantial gate count, dedicated block RAM resources and configurable digital interfaces. Typical uses include industrial automation controllers, data-acquisition systems, communications infrastructure, embedded video and control platforms, and test-and-measurement instruments. The 221 available I/O sites are especially useful where the design must bridge multiple buses, retain parallel data paths or connect external memories and converters while retaining the flexibility of programmable logic. PCB implementation should prioritize the manufacturer's pinout and ball-assignment tables, power-decoupling recommendations and high-speed layout guidance. A 320-ball BGA demands careful escape routing, continuous power planes, via-in-pad or fanout-compatible construction, and adequate thermal spreading beneath the device. Verify the programmed bitstream against the exact device identifier and package before production programming. This product page combines the core device identifiers, package information, design guidance, commercial sourcing answers and qualified drop-in alternatives into one engineering-focused reference. It also distinguishes same-family replacements by speed grade, temperature designation and package configuration so engineers can identify the exact migration path for an existing Spartan-3 design.

RFQ Contact
XC3S1500-4FG456C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG456C

XC3S1500-4FG456C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD Xilinx XC3S1500-4FG456C is a discontinued Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 logic cells, 333 user I/Os, and a 1.2 V core supply. It is packaged in a 456-ball plastic FBGA measuring 23 × 23 mm and is specified for commercial-temperature operation. The -4 designation identifies its performance speed grade. A field-programmable gate array is a programmable logic device in which digital functions are configured through programmable interconnect and logic resources. The Spartan-3 FPGA family sits within the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, block RAM, dedicated input/output resources, and programmable interconnect in a single CMOS package. This architecture supports parallel signal processing, control, interface bridging, and embedded-system logic without requiring a custom ASIC. The XC3S1500-4FG456C provides 29,952 logic cells and a listed system-gate count of 1,500,000. Its 576 Kb of block RAM supports buffering, packet storage, data acquisition, and general-purpose on-chip memory. A maximum operating frequency of 630 MHz is listed for the device, while 333 user I/Os provide substantial connectivity for external memory, buses, clocks, control signals, and high-speed interfaces. The device uses 90 nm CMOS fabrication and a nominal 1.2 V core supply. Its 456-ball FBGA places hundreds of contacts beneath the device, supporting dense PCB routing and high I/O availability. The commercial version operates from 0 °C to 85 °C at the junction, making it relevant to cost-sensitive commercial equipment that does not require the broader industrial-temperature qualification associated with related suffix variants. Typical uses include industrial control systems, communications equipment, video-processing modules, embedded instruments, and consumer products requiring high logic density in a compact package. Its large I/O count is particularly useful for parallel interfaces, while block RAM can retain sampled data or packet payloads. Designs must account for the legacy Spartan-3 toolchain, configuration requirements, and the availability of newer programmable-logic devices. PCB implementation requires careful ball-grid-array layout, controlled impedance routing, multiple power rails, decoupling, and a configuration source compatible with the Spartan-3 architecture. Because this exact MPN has been discontinued, long-lived or safety-related products should confirm supply continuity and consider a pin-compatible Spartan-3L option when its electrical and configuration characteristics are acceptable. This page combines the exact XC3S1500-4FG456C ordering characteristics, package and lifecycle information, structured comparisons with pin-compatible alternatives, and practical migration guidance. It also identifies the engineering limits that matter when reusing an existing 456-ball PCB or transferring a design to a newer FPGA family.

RFQ Contact
XC3S1500-4FG676C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG676C

XC3S1500-4FG676C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG676C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 487 I/O, and a 1.2 V core operating voltage, supplied in a 676-ball BGA package. It is designed for applications requiring substantial configurable logic resources, parallel digital interfaces, and deterministic programmable behavior. The FPGA combines programmable logic, block RAM, dedicated DSP resources, and programmable I/O within one integrated device. A field-programmable gate array is a semiconductor device whose digital circuit is defined after manufacture. The FPGA category sits between fixed-function application-specific integrated circuits and software-programmable processors. Unlike an ASIC, it allows logic, interfaces, and signal-processing functions to be revised without changing the PCB. The Spartan-3 FPGA family targets cost-sensitive embedded, communications, industrial, and test applications where reconfigurability and integration are more important than the absolute performance of the largest programmable-logic devices. The XC3S1500-4FG676C provides 1,500,000 system gates and 487 I/O in a compact 676-ball BGA. Its 1.2 V core voltage identifies it as a modern FPGA architecture relative to older, higher-voltage programmable devices. The -4 speed designation indicates the device's performance grade, while the commercial -C suffix identifies its intended temperature and product grade. Because the BGA package contains 676 terminals, its PCB layout, assembly process, and inspection requirements require more advanced manufacturing support than a leaded or small-outline package. Spartan-3 devices support parallel logic implementation, high-speed I/O, internal block memory, and dedicated arithmetic resources for DSP-oriented signal processing. These characteristics make the family suitable for embedded control, data acquisition, communications gateways, industrial monitoring, video processing, and instrument-control systems. Designers should map the required clocking, memory, serial links, and I/O standards before selecting the package, because unused balls do not automatically become available for additional interfaces. Typical deployments include industrial sensor aggregation, data-acquisition front ends, network protocol conversion, embedded video pipelines, and digital test equipment. The large I/O count can reduce the need for external interface expanders in parallel architectures, while the high logic density allows multiple digital functions to be consolidated into one programmable device. The principal design consideration is BGA implementation. Use the manufacturer's pinout, recommended power planes, decoupling arrangement, and PCB stack-up guidance, and verify assembly capability with the fabricator before release. Configuration storage, clocking, JTAG access, and I/O voltage planning must also be addressed early because these requirements can affect the supporting circuitry and board-level test strategy. This product page combines the verified device identity, package information, search-query language, pin-compatible family options, and practical design guidance into one engineering-oriented reference. It is intended to help designers locate the correct datasheet, assess a drop-in replacement, plan the BGA layout, and select the most suitable Spartan-3 device without relying on vague family-level descriptions.

RFQ Contact
XC3S1500-4FG676I - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG676I

XC3S1500-4FG676I - 1.5M Gate Spartan-3 FPGA | AMD

AMD XC3S1500-4FG676I is a Spartan-3 field-programmable gate array with 1.5 million system gates, 29,952 logic cells, up to 487 user I/O, and a 1.2 V supply in a 676-pin BGA package. The -4 speed designation corresponds to the listed 630 MHz performance, while the I suffix identifies the industrial-temperature ordering option. A field-programmable gate array, or FPGA, is a programmable digital semiconductor used to implement control logic, signal processing, interface bridging, and embedded systems through a configurable logic and interconnect fabric. FPGAs occupy the programmable-logic portion of the integrated-circuit hierarchy and can shorten development cycles by replacing application-specific gate arrays with reconfigurable devices. The Spartan-3 architecture provides 29,952 configurable logic cells and 487 user I/O in this 676-BGA configuration. Its 1.2 V core supply and 630 MHz listed performance make it useful for demanding parallel data paths, protocol handling, instrumentation, communications, and embedded control. The package offers substantial pin and routing capacity compared with smaller FPGA packages. The XC3S1500 combines programmable logic cells, programmable I/O blocks, dedicated memory resources, internal clocking, and configurable interconnect within one device. This architecture permits parallel datapaths and deterministic control logic to coexist on the same FPGA, reducing external component count compared with a design assembled from separate logic devices. Typical uses include industrial automation, communication equipment, test and measurement, video or image processing, embedded storage systems, and high-performance controller prototypes. Designers can also use it to consolidate several fixed-function logic functions into one reconfigurable device while preserving software or configuration-based field updates. PCB implementation requires careful BGA-layout practices, including the manufacturer-recommended land pattern, multilayer board construction, controlled-impedance routing, complete power and ground planes, and decoupling close to supply pins. Configuration memory, clocking, JTAG access, I/O standards, and bank-specific voltage requirements must be planned before schematic capture. This product page combines the listed device specifications, a focused package-aware comparison, practical design guidance, and ordering information for engineers evaluating the XC3S1500-4FG676I for programmable-logic designs.

RFQ Contact
XC3S1500-5FG320C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-5FG320C

XC3S1500-5FG320C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-5FG320C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 logic cells, and up to 221 I/O in a 320-pin fine-pitch BGA package. The device operates from a 1.2 V core supply, uses 90 nm process technology, and is offered in the -5 performance grade. Its architecture combines configurable logic, dedicated memory resources, programmable I/O, and embedded hard multipliers, making it suitable for digital control, interface, signal-processing, and embedded-system designs. A field-programmable gate array is a semiconductor whose digital logic, interconnects, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where a CPLD provides comparatively simpler fixed-capacity structures while an FPGA offers substantially greater logic density, routing flexibility, and signal-processing resources. The Spartan-3 family occupies the middle ground between small CPLDs and larger high-end FPGAs, targeting cost-sensitive designs that still require considerable parallelism and configurable peripherals. The XC3S1500-5FG320C provides 29,952 logic cells, 1,500,000 system gates, and 221 I/O. Its 90 nm fabrication supports a core supply of 1.2 V, while the -5 suffix identifies its performance grade. The 320-pin FBGA package reduces lead pitch and provides a compact implementation for systems requiring numerous board connections. These characteristics allow one package to carry control logic, memory interfaces, serial links, parallel buses, and arithmetic functions rather than requiring several separate programmable devices. The programmable architecture supports parallel datapaths that can improve throughput through hardware pipelining and resource replication. Designers can assign logic to look-up tables, connect it through programmable routing, and instantiate dedicated block RAM or multiplier resources when regular logic would consume excessive area or power. Performance is design-dependent because routing congestion, external memory speed, I/O standards, clocking, and tool constraints influence the final clock rate. The 725 MHz figure associated with this device family should therefore not be interpreted as a guaranteed system frequency for every design. Typical uses include industrial automation controllers, video-processing pipelines, communication gateways, data-acquisition systems, and embedded instruments. The 221 available I/O are valuable for parallel sensor interfaces, memory buses, control signals, and external converters. Because the FPGA can execute several operations concurrently, it can implement protocol conversion, filtering, buffering, and control functions in parallel. This reduces reliance on multiple processors when deterministic operation and direct hardware interaction are important. PCB implementation requires careful attention to the fine-pitch BGA footprint, power-plane geometry, via distribution, and ball-assignment constraints. Decoupling and multiple power rails must follow the manufacturer’s pinout and reference guidance. Signal integrity also depends on controlled-impedance routing for clocks and high-speed interfaces. Before committing a layout, engineers should generate the physical constraints and perform stackup-aware signal-integrity analysis rather than treating the compact package as a conventional fine-pitch BGA breakout task. This page combines device specifications, package and lifecycle information, qualification of same-footprint alternatives, parameter comparisons, and practical PCB-design guidance. The alternatives listed are restricted to pin-compatible Spartan-3 package variants, while unavailable technical details are clearly marked for datasheet review. This engineering-focused synthesis helps buyers compare migration choices while keeping board-level compatibility and timing closure as the primary decision criteria.

RFQ Contact
XC3S1500-5FG676C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-5FG676C

XC3S1500-5FG676C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD/Xilinx XC3S1500-5FG676C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 configurable logic cells, and a 676-ball FBGA package. The device operates from a 1.2 V core supply, is manufactured on a 90 nm process, and is specified in the -5 speed grade with a stated performance level of 725 MHz. A field-programmable gate array, or FPGA, is a semiconductor device containing programmable logic, routing, input/output, and memory resources. FPGA design flow combines hardware description languages, synthesis, place-and-route tools, timing analysis, and device programming. The Spartan-3 family occupies the FPGA category within programmable logic devices and is positioned for designs requiring substantial parallel processing in a single package. The XC3S1500 device provides 29,952 logic cells, 589,824 RAM bits, and 487 I/O positions according to its product listing. Its 676-ball surface-mount package supports dense connections among the configurable fabric, dedicated memory, and external circuitry. The -5 designation identifies the performance grade, while the C suffix identifies the commercial temperature class. Spartan-3 devices use a configurable architecture rather than a fixed logic function, allowing designers to implement parallel datapaths, state machines, interfaces, and control systems in one device. The 90 nm fabrication process and 1.2 V core supply place the component within the technology and power characteristics of the Spartan-3 generation. Performance also depends on the selected design, package speed characteristics, memory interface, and external circuitry. Typical applications include industrial automation, communications infrastructure, instrumentation, embedded control, video processing, and general-purpose digital signal processing. The large logic-cell count and 487 I/O positions are useful when a design must combine parallel computation with numerous external interfaces, while the integrated RAM resources support buffers, lookup tables, and moderate data-storage functions. A critical design step is power planning because FPGA configuration and dynamic switching activity can create substantial board-level power demand. Decoupling, supply sequencing, clock integrity, and thermal management should be reviewed against the Spartan-3 design guidance. Because the -5 part is a -5 speed-grade device, timing closure should use the appropriate device speed file and the worst applicable operating conditions. This product record combines the exact ordering code with package, logic-resource, process, and speed information, alongside drop-in same-family options, application guidance, and engineering-focused comparison data that help shorten component identification and design-review work.

RFQ Contact
XC3S1600E-4FG484I - 1.6M Gate Spartan-3E FPGA | AMD Xilinx
XC3S1600E-4FG484I

XC3S1600E-4FG484I - 1.6M Gate Spartan-3E FPGA | AMD Xilinx

The AMD Xilinx XC3S1600E-4FG484I is a Spartan-3E family Field Programmable Gate Array (FPGA) delivering 1.6 million system gates, 33,192 logic cells, and 376 user I/Os in a 484-ball Fine-Pitch Ball Grid Array (FBGA) package. Fabricated on a 90nm CMOS process with a 1.2V core supply, this industrial-temperature device (I suffix, -40C to +100C) runs at speed grade -4 and integrates 29,504 registers and 648 Kbits (663,552 bits) of distributed and block RAM. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks (CLBs) and programmable interconnects that the designer configures in the field via HDL (VHDL/Verilog). Within the programmable logic hierarchy, the FPGA sits above CPLDs in capacity and sits alongside ASSPs as a core digital logic implementation platform for system-on-chip prototyping and production designs. Key features of the XC3S1600E include 3,688 CLBs/LABs providing high logic density, 572MHz maximum toggle capability supported by dedicated digital clock managers (DCMs), and abundant block RAM for FIFOs and dual-port memories. The 376 I/Os support multiple I/O standards with configurable banks, enabling wide data-path interfaces. Architecturally, the Spartan-3E platform uses a 4-input look-up table (LUT) based fabric with dedicated carry logic, multiplier blocks, and DCMs for clock conditioning - well suited to cost-sensitive control, glue logic, and DSP-lite tasks. The 90nm process keeps core power low at 1.2V while retaining robust routing flexibility. Typical applications include industrial control and automation, embedded system prototyping, data acquisition glue logic, motor control interfaces, and communications line cards. The wide 376-I/O budget makes it a natural fit for bus bridging and parallel-to-serial adaptation. A key design consideration: the Spartan-3E family is mature, so plan configuration via a platform Flash PROM (such as XCF-series) and verify 1.2V core, 3.3V auxiliary, and I/O bank rails meet sequencing guidance in the datasheet. This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
XC3S1600E-5FGG320C - Spartan-3E FPGA 1.6M Gates | AMD/Xilinx
XC3S1600E-5FGG320C

XC3S1600E-5FGG320C - Spartan-3E FPGA 1.6M Gates | AMD/Xilinx

The AMD (Xilinx) XC3S1600E-5FGG320C is a Spartan-3E family FPGA with 1.6 million system gates, 33,192 logic cells, and 250 user I/Os, fabricated on 90nm CMOS process technology and housed in a 320-ball fine-pitch BGA (FGG320, 19x19 mm) package. It operates from a 1.2V core supply (1.14V to 1.26V) with a commercial temperature range of 0C to 85C junction, and speed grade -5. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks (CLBs), embedded memory, and programmable interconnects that designers configure via a hardware description language such as Verilog or VHDL. Within the semiconductor hierarchy, an FPGA sits under programmable logic devices, alongside CPLDs and ASICs, and is used to implement custom digital logic without fabricating a custom chip. Key features of the XC3S1600E include a large 1.6M-gate fabric for mid-density designs, 250 user I/Os supporting multiple I/O standards, Spartan-3E cost-optimized architecture, and availability of configuration via platform flash devices such as the XCF32P. The Spartan-3E family was widely adopted in telecommunications, industrial control, and consumer electronics, per Microchip USA product data. Architecturally, the Spartan-3E fabric uses 4-input look-up tables (LUTs), dedicated carry logic, block RAM, and embedded multipliers, enabling DSP datapaths, glue logic consolidation, bus interfaces, and control sequencing on a single chip. Typical applications include industrial control systems, telecommunications line cards, test equipment, motor control interfaces, and legacy system sustenance where a proven mid-density FPGA is already designed in. Design consideration: this part is officially obsolete and no longer manufactured, per DigiKey lifecycle data, so new designs should evaluate AMD 7-series (Spartan-7, Artix-7) or cross-brand alternatives; existing designs should secure stock or a qualified migration path. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not consolidated in the manufacturer datasheet.

RFQ Contact
XC3S1600EFG400 - Spartan-3E FPGA 1.6M Gates | AMD/Xilinx
XC3S1600EFG400

XC3S1600EFG400 - Spartan-3E FPGA 1.6M Gates | AMD/Xilinx

The AMD/Xilinx XC3S1600EFG400 is a member of the Spartan-3E family of Field Programmable Gate Arrays (FPGAs), offering a high-density programmable logic solution with 33,192 logic cells and an equivalent gate count of 1,600,000. Housed in a 400-ball FBGA package (FG400), this device provides 304 user I/O pins and 663,552 bits of block RAM, making it suitable for a wide range of digital designs. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. FPGAs consist of an array of programmable logic blocks, interconnects, and I/O blocks, allowing the implementation of complex digital circuits without the need for custom fabrication. They are a subset of programmable logic devices (PLDs) and are widely used in prototyping, low-to-medium volume production, and applications requiring reconfigurability. Key features of the XC3S1600EFG400 include 33,192 logic cells, 663,552 bits of block RAM, and support for a maximum clock frequency of 572 MHz. The device operates from a 1.2V core voltage and is manufactured using advanced CMOS technology. The FG400 package offers 400 balls with a 1.00 mm pitch, providing a compact footprint for space-constrained designs. The Spartan-3E architecture is optimized for high performance and low cost, featuring dedicated multipliers, digital clock managers (DCMs), and support for various I/O standards including LVCMOS, LVTTL, and differential standards. The device also includes configuration support via JTAG, SPI, and SelectMAP interfaces, enabling flexible system integration. Typical applications for the XC3S1600EFG400 include industrial control, automotive infotainment, consumer electronics, and communication systems. Its balance of logic density, I/O count, and cost makes it ideal for bridging ASIC prototyping and production. When designing with this FPGA, careful attention must be paid to power supply decoupling and configuration bitstream storage. The 1.2V core requires stable power, and the configuration data is typically stored in an external SPI flash, which must be selected for compatibility.

RFQ Contact
XC3S200-4FT256C - 200K Spartan-3 FPGA | AMD / Xilinx
XC3S200-4FT256C

XC3S200-4FT256C - 200K Spartan-3 FPGA | AMD / Xilinx

AMD XC3S200-4FT256C is a Spartan-3 field-programmable gate array with 200000 system gates, 4320 cells, and a 256-LBGA package. The -4 speed grade operates at up to 630 MHz, while the device uses a nominal 1.2 V core supply and is manufactured in 90 nm process technology. These headline characteristics position the FPGA between fixed-function logic and larger programmable-logic devices for cost-sensitive, moderate-complexity embedded systems. A field-programmable gate array is a programmable logic device in which configurable logic blocks, programmable input/output blocks, and programmable interconnect form a user-defined digital circuit. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices, alongside CPLDs and mask-programmable logic. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA can be reconfigured after manufacture to implement control, interface, protocol, signal-processing, or security functions in parallel. The Spartan-3 architecture provides 480 configurable logic blocks and 4320 cells according to the supplied distributor and comparison data. Its 256-ball package supports 256 terminals for device configuration, power, clocking, and user I/O. The -4 designation identifies the performance grade, while the commercial C suffix corresponds to the stated 0°C to 85°C operating-temperature range. A maximum supply voltage of 1.26 V and a nominal 1.2 V FPGA supply are also reported in the available data. The 90 nm Spartan-3 process supports a useful balance of logic capacity, static power, dynamic performance, and manufacturing cost. At up to 630 MHz, the XC3S200-4FT256C can satisfy clock-domain requirements that are more demanding than simple glue logic while remaining smaller and less complex than a high-end FPGA. Exact timing, I/O standards, supported memory interfaces, configuration options, and core-current limits require confirmation in the complete manufacturer datasheet before a new design is released. Typical uses include industrial control and automation, communications equipment, embedded test systems, consumer products, instrumentation, and compact control modules. Its parallel programmable resources can implement multiple finite-state machines, data acquisition logic, communication bridges, and auxiliary processors concurrently. The 256-terminal package also makes the device suitable for designs requiring more configuration and user I/O than a small CPLD, although board density and routing must be assessed at the schematic and PCB stages. Designers should treat the package, voltage rails, decoupling, configuration interface, clocking, and I/O standards as a coordinated system rather than isolated specifications. Place bypass capacitors close to the supply pins, preserve the required configuration path, and verify every ball assignment against the exact package drawing. Because the supplied snippets contain inconsistent secondary descriptions of package and cell data, the authoritative manufacturer pinout and datasheet should control any production implementation. This page combines the verified distributor specifications with engineering-focused application guidance, design notes, parameter comparisons, and same-family drop-in candidates. It also distinguishes confirmed values from unavailable electrical details, helping engineers identify the correct replacement without mistaking a similar FPGA for a guaranteed production substitute.

RFQ Contact
XC3S200-4FT256I - 200K Spartan-3 FPGA | AMD | FTBGA-256
XC3S200-4FT256I

XC3S200-4FT256I - 200K Spartan-3 FPGA | AMD | FTBGA-256

The AMD XC3S200-4FT256I is a 200K-gate Spartan-3 field-programmable gate array (FPGA) with 4,320 logic cells, a 630 MHz maximum clock frequency, and a 256-terminal FineLine BGA package measuring 17 mm by 17 mm. The device uses 90 nm FPGA technology and operates from a 1.14 V to 1.26 V internal core supply. Its 256-terminal package provides a high pin count for dense programmable-logic designs while maintaining a compact board footprint. A field-programmable gate array is a configurable digital semiconductor containing programmable logic blocks, programmable interconnect, and input/output resources. An FPGA belongs to the semiconductor hierarchy, programmable-logic IC hierarchy, and Spartan-3 FPGA family. Unlike a fixed-function application-specific integrated circuit, an FPGA allows system designers to implement parallel logic, control functions, signal processing, and interface logic in hardware and later update the configuration through a configuration memory or JTAG programming path. The XC3S200-4FT256I combines 4,320 logic cells with 200K system gates and a maximum clock frequency of 630 MHz. The -4 speed designation identifies the performance grade, while the I suffix identifies the industrial temperature grade. The device is specified for 0 C to +85 C operation in the supplied distributor data, making it suitable for industrial and embedded control equipment where environmental requirements exceed consumer-grade conditions. The 17 mm by 17 mm FTBGA-256 package supports compact PCB layouts but requires careful escape routing, via-in-pad or via fan-out strategies, assembly-process control, and inspection. The 1.2 V core supply requires a regulated, low-noise supply rail and appropriate power-plane distribution. Because this is a legacy Spartan-3 FPGA, designers should also verify configuration memory availability, toolchain support, lifecycle status, and second-source requirements before committing a new production design. Typical applications include industrial control, instrumentation, data acquisition, communication interfaces, embedded signal processing, and prototype systems requiring configurable parallel logic. The high-pin-count package is particularly useful when the design needs numerous user I/O or dedicated interface resources, although the exact user I/O count is not provided in the verified data. A key design consideration is that replacing an XC3S200-4FT256I is not limited to matching its package. A true drop-in candidate must also preserve pin assignment, voltage requirements, configuration behavior, timing characteristics, and software support. This page summarizes verified distributor and manufacturer-linked information, compares documented drop-in candidates, and identifies engineering details that must be confirmed before PCB release.

RFQ Contact
XC3S200-4FTG256C - 200K Spartan-3 FPGA | AMD
XC3S200-4FTG256C

XC3S200-4FTG256C - 200K Spartan-3 FPGA | AMD

AMD XC3S200-4FTG256C is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic cells, a 630 MHz maximum clocking frequency, and a 256-ball low-profile BGA package. Designed for cost-sensitive programmable-logic applications, the device combines configurable logic, block RAM, dedicated DSP resources, and a 1.2 V core supply in a single surface-mount package. The -4 speed designation identifies its performance grade, while FTG256C identifies the 256-ball package and commercial temperature option. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture rather than being permanently patterned. Within the FPGA hierarchy, an FPGA sits above fixed-function logic and below complex programmable systems such as SoCs and microcontrollers. Its configurable LUTs, routing fabric, dedicated memories, and I/O blocks allow one physical device to implement many digital functions, including control logic, interfaces, data acquisition, communications, and signal-processing pipelines. The XC3S200 family is identified by 200,000 system gates and includes 4,320 configurable logic cells according to the AMD Spartan-3 device information. A maximum clock frequency of 630 MHz supports demanding control and datapath designs, although attainable system performance depends on logic depth, routing, memory use, and timing constraints. The core operates from 1.2 V, reducing supply requirements in compact embedded systems. Its 256-LBGA package provides dense I/O connectivity while supporting high-density board layouts. The Spartan-3 architecture implements programmable logic through configurable lookup tables and programmable interconnect. Dedicated block RAM supports buffering, packet storage, and data-domain conversion, while DSP blocks accelerate multiply-accumulate operations used in filtering, modulation, and waveform processing. The -4 speed grade provides a defined timing-performance class for design planning, and the 90 nm fabrication technology places this device in an established, cost-oriented FPGA generation. Typical applications include industrial control, consumer electronics, video and image processing, communications interfaces, embedded data capture, educational platforms, and compact embedded systems. Its combination of 4,320 logic cells, dedicated resources, and 256-ball packaging makes it suitable for designs that need programmable functionality without the resource level of a larger FPGA. Designers should assign a pin-compatible clock, configure an appropriate Spartan-3 PROM or in-system configuration interface, and verify all I/O standards against the device datasheet. Dense BGA routing requires careful escape, via, and plane management, while clock, decoupling, and power-distribution networks should follow the AMD reference guidance to preserve timing and signal integrity. This product page combines device specifications, package information, pricing visibility, qualified drop-in candidates, and practical implementation guidance. It also distinguishes exact-footprint replacements from broader Spartan-3 alternatives, helping engineers confirm mechanical, electrical, lifecycle, and software-tool implications before changing a production bill of materials.

RFQ Contact
XC3S200-4FTG256I - Spartan-3 FPGA 200K Gates | Xilinx
XC3S200-4FTG256I

XC3S200-4FTG256I - Spartan-3 FPGA 200K Gates | Xilinx

The Xilinx XC3S200-4FTG256I is a Spartan-3 family field programmable gate array (FPGA) offering 200,000 system gates and 4,320 logic cells in a 256-ball FineLine BGA (FTG256) package, with a 1.2V core voltage, industrial temperature rating of -40C to +100C, and a -4 speed grade supporting internal performance up to approximately 630 MHz. A field programmable gate array is a semiconductor device containing a fabric of configurable logic blocks (CLBs), programmable interconnects, and I/O blocks that the designer configures after manufacturing. FPGAs sit within the broader programmable logic hierarchy: CLB -> FPGA -> programmable logic device -> digital IC. Unlike fixed-function ASICs, FPGAs allow field reprogramming, making them ideal for prototyping, low-to-medium volume production, and designs requiring in-service updates. Key features of the XC3S200 include 2,160 slices built on a 90nm process technology, 12 blocks of 18Kbit block RAM totaling 216 Kbits of embedded dual-port memory, four 18x18 hardware multipliers for DSP operations, a Digital Clock Manager (DCM) for clock deskew and frequency synthesis, and up to 173 user I/Os supporting multiple I/O standards such as LVTTL, LVCMOS, SSTL, and LVDS on bank-selectable VCCO rails. Technically, the Spartan-3 fabric uses a four-input lookup table (LUT) per slice logic cell with dedicated fast carry logic for arithmetic chains. The -4 speed grade denotes the fastest standard commercial/industrial timing bin of the Spartan-3 family. Configuration is performed via serial or parallel PROMs (Xilinx Platform Flash) in Master/Slave Serial or SelectMAP modes with JTAG boundary-scan support per IEEE 1149.1. Typical applications include industrial control and motor drive logic, communication protocol bridging, test and measurement instrumentation, and embedded coprocessing with the hardware multipliers for modest DSP tasks. The 17x17mm FTBGA footprint suits space-constrained boards requiring high I/O density. A key design consideration is power: the 1.2V core requires a dedicated regulator, and I/O bank VCCO supplies must match the connected logic standards; total power scales with clock frequency and toggle rates, so use the Xilinx power estimator early in design. This page synthesizes verified distributor data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
XC3S200-4PQ208C - 200K Spartan-3 FPGA | AMD / Xilinx
XC3S200-4PQ208C

XC3S200-4PQ208C - 200K Spartan-3 FPGA | AMD / Xilinx

The AMD / Xilinx XC3S200-4PQ208C is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic cells, 480 configurable logic blocks, and 221,184 RAM bits in a 208-pin PQFP package. It operates from a 1.2 V core supply and is specified for the commercial temperature range of 0°C to 85°C. A field-programmable gate array is a semiconductor whose digital logic, memory, and I/O paths are configured after manufacture. Within the product hierarchy, the XC3S200-4PQ208C is an FPGA, then a programmable-logic device, and ultimately a semiconductor. Compared with fixed-function logic ICs, an FPGA lets engineers implement parallel processing, control, communications, and signal-generation functions in one reconfigurable device while retaining the same package and pinout across design revisions. The supplied product data identifies 141 I/O, 4,320 logic cells, 480 CLBs, 221,184 RAM bits, and 200,000 system gates. The “-4” speed designation and an associated listing report 630 MHz performance, while the commercial “C” suffix identifies the specified temperature grade. Its 208-pin PQFP package exposes substantially more device I/O than the smaller 100-pin Spartan-3A options, making it suitable for designs with wider external buses or more peripheral connections. The XC3S200-4PQ208C fits industrial control, communications infrastructure, embedded instrumentation, video processing, test equipment, and legacy embedded systems. A practical design can use its programmable logic for parallel data acquisition, protocol conversion, signal conditioning, and supervisory control while retaining configuration data in external nonvolatile flash. Engineers should verify every power rail, configuration interface, and high-speed I/O constraint against the complete Spartan-3 documentation before layout release. Power and termination design remain central to reliable FPGA implementation. Provide the specified core and I/O supplies, route each supply through its documented decoupling network, and use a configuration scheme that matches the board’s flash and control logic. Because the supplied excerpts do not provide full electrical limits, pin assignments, or power-budget data, those details require confirmation from the manufacturer’s official Spartan-3 documentation before schematic completion. This page consolidates verified distributor specifications, same-package family comparisons, commercial availability references, and application-specific engineering guidance. It distinguishes the XC3S200-4PQ208C from smaller Spartan-3 packages and higher-density PQFP208 devices, helping engineers determine whether the device’s logic, memory, I/O, and thermal requirements align with an existing 208-pin PCB design.

RFQ Contact
XC3S200-4PQ208I - 200K-Gate Spartan-3 FPGA | AMD Xilinx
XC3S200-4PQ208I

XC3S200-4PQ208I - 200K-Gate Spartan-3 FPGA | AMD Xilinx

AMD Xilinx XC3S200-4PQ208I is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic cells, 141 user I/O, and a stated 630 MHz performance figure, supplied in a 208-pin PQFP package. The device operates from a 1.2 V core supply and is built on 90 nm CMOS process technology. Its -4 speed designation identifies a performance grade, while the PQ208 suffix denotes the 208-pin plastic quad flat package and I suffix identifies the industrial temperature option. A field-programmable gate array is a programmable semiconductor in which digital logic, interfaces, and system functions are configured after manufacture. Within the product hierarchy, an FPGA is a semiconductor and a programmable logic device. The Spartan-3 family targets cost-sensitive designs requiring more flexibility than fixed-function logic, while providing configurable logic blocks, dedicated arithmetic resources, block RAM, and programmable I/O within one integrated device. The XC3S200-4PQ208I combines 480 configurable logic blocks with 4,320 logic cells and 141 user I/O according to the supplied manufacturer-family data. Its 200,000-system-gate count describes the family device's logic-equivalent capacity rather than a fixed gate count. The 630 MHz figure likewise requires careful interpretation because achievable system performance depends on the selected design, timing constraints, clocking, I/O standards, routing, and the associated Xilinx toolchain. The 90 nm Spartan-3 architecture supports integration of control logic, data acquisition, communications glue logic, state machines, and modest parallel-processing functions. Reconfigurability allows design revisions to be implemented in the FPGA bitstream rather than through a PCB respin. Dedicated block RAM can buffer sampled or packet data, while programmable I/O can connect the device to external clocks, data buses, transceivers, displays, and industrial interfaces subject to voltage and timing constraints. Typical uses include industrial automation, programmable logic controllers, motor-control and sensor-processing systems, embedded communications, instrumentation, and cost-sensitive consumer or control electronics. The 208-pin PQFP provides more I/O than a small FPGA package, making it useful where parallel external buses, control signals, or multiple interfaces must coexist with the Spartan-3 logic fabric. Design planning should begin with the AMD/Xilinx Spartan-3 datasheet and the appropriate ISE or Vivado-era design flow for the installed device family. Verify the exact pinout, supported I/O standards, configuration requirements, decoupling, clock topology, and exposed thermal and power constraints on the selected package before layout release. This page consolidates verified distributor specifications, pricing references, same-family drop-in candidates, and practical selection considerations for engineers evaluating the XC3S200-4PQ208I.

RFQ Contact
XC3S200-4PQG208C - 200K Gate Spartan-3 FPGA | AMD
XC3S200-4PQG208C

XC3S200-4PQG208C - 200K Gate Spartan-3 FPGA | AMD

The AMD XC3S200-4PQG208C is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic cells, 221,184 bits of block RAM, and 141 I/O in a 208-BFQFP package. It operates from a 1.2 V core supply and provides four performance levels suitable for cost-sensitive industrial, communications, control, and data-acquisition systems. A field-programmable gate array, or FPGA, is a semiconductor whose logic, memory, and I/O resources can be configured after fabrication. Within the programmable-logic hierarchy, an FPGA provides higher implementation flexibility than a fixed-function logic IC while offering reusable hardware for parallel processing, interface bridging, control, and signal conditioning. The Spartan-3 architecture combines configurable logic blocks, dedicated block RAM, programmable I/O, and clock-management resources. The XC3S200-4PQG208C provides 4,320 logic cells and 221,184 bits of block RAM, giving a board designer enough resources for parallel datapaths, protocol conversion, control logic, and moderate signal-processing functions. Its 141 I/O provide substantial connectivity for external memories, converters, transceivers, and industrial interfaces. The -4 suffix identifies the device performance class, while the commercial-temperature C suffix distinguishes it from the industrial-temperature I version. Spartan-3 devices use a 1.2 V core voltage and programmable configuration logic to implement user-defined digital circuits. The 208-BFQFP package exposes 141 configurable user I/O and supports surface-mount PCB assembly. Designers can use the same logic design across supported Spartan-3 devices when device resources, speed grades, package pinouts, and electrical constraints remain compatible. Typical uses include industrial automation modules, PLC interfaces, motion-control systems, telecommunications protocol converters, low-cost data-acquisition equipment, and embedded control platforms. The combination of configurable logic, dedicated block RAM, and 141 I/O is particularly useful when a design must consolidate several fixed-function functions into one programmable device. PCB design should follow the manufacturer’s Spartan-3 pinout and power-supply recommendations, including correct decoupling, configuration-interface support, signal-integrity routing, and adequate thermal copper. Verify the selected bitstream, clock source, pin constraints, and I/O standards against the appropriate device configuration before releasing production files. This product reference combines manufacturer-family specifications, package and resource details, commercial sourcing information, pin-compatible Spartan-3 alternatives, and practical implementation guidance to support faster engineering evaluation and more disciplined replacement planning.

RFQ Contact