Products (44,000+)

XC3090L-7TQ176C - XC3000L Low-Voltage FPGA | Xilinx | 176-pin TQFP
XC3090L-7TQ176C

XC3090L-7TQ176C - XC3000L Low-Voltage FPGA | Xilinx | 176-pin TQFP

The Xilinx XC3090L-7TQ176C is a member of the XC3000L Low-Voltage Logic Cell Array family, a legacy field-programmable gate array (FPGA) designed for low-voltage (3.3 V) operation in a 176-pin TQFP package with -7 speed grade and commercial temperature range. As a programmable logic IC from the Xilinx XC3000 series, it combines SRAM-based configuration with a fine-grained logic cell architecture optimized for glue logic, control plane, and state-machine designs. A field-programmable gate array (FPGA) is a type of integrated circuit that can be configured by the customer or designer after manufacturing to implement arbitrary digital logic. FPGAs sit between programmable logic devices (PLDs/CPLDs) and application-specific integrated circuits (ASICs) in the silicon hierarchy, offering higher density than PLDs and lower NRE cost than ASICs. The XC3000L family is the low-voltage derivative of the original XC3000 architecture introduced in the early 1990s, designed for 3.3 V systems where the standard 5 V XC3000 family could not operate. Key features of the XC3090L include an SRAM-based configuration memory, an abundant count of configurable logic blocks (CLBs) and user I/O for a part of its era, and a -7 speed grade rating that places it within the standard performance bin of the family. The device is offered in the TQ176 package - a 176-pin thin quad flat pack with gull-wing leads suitable for surface-mount assembly. The commercial temperature suffix ("C") denotes 0 °C to +85 °C operation. Architecturally, the XC3090L uses a symmetrical array of configurable logic blocks surrounded by a perimeter of user-programmable I/O blocks (IOBs). Interconnect is provided by a hierarchical routing network driven by metal-mask or SRAM programming. A configuration bitstream loaded into on-chip SRAM defines all logic, routing, and I/O behavior, allowing unlimited re-programmability but requiring an external configuration memory on power-up. Typical applications for the XC3090L-7TQ176C include legacy telecom interface cards, industrial control and instrumentation, test equipment glue logic, prototype ASIC replacement, and educational hardware platforms. Designers maintaining installed-base systems with XC3000L silicon continue to source this part for repair and field replacements. When designing with this legacy FPGA, note that the -7 speed grade corresponds to a specific timing window within the family; designers should consult the original Xilinx datasheet and use the XACTstep or Foundation toolchain for synthesis, place-and-route, and bitstream generation. Configuration storage requires an external EPROM or microcontroller since SRAM cells are volatile. This page synthesizes distributor stock data, drop-in same-package alternatives, and practical sourcing guidance for engineers maintaining XC3000L designs - information not found in any single distributor listing.

RFQ Contact
XC3090L-7TQ176I - 3.3V Logic Cell Array FPGA, 176-pin TQFP | Xilinx
XC3090L-7TQ176I

XC3090L-7TQ176I - 3.3V Logic Cell Array FPGA, 176-pin TQFP | Xilinx

The Xilinx XC3090L-7TQ176I is a member of the XC3000L Low-Voltage Logic Cell Array family, a static RAM-based field-programmable gate array (FPGA) housed in a 176-pin Thin Quad Flat Pack (TQFP) package with industrial temperature grade. The XC3000L family targets low-voltage 3.3V operation while preserving the original XC3000 architecture, making it suitable for designs migrating from 5V to 3.3V logic rails. Per the XC3090L datasheet, the device integrates configurable logic blocks (CLBs), a perimeter of programmable input/output blocks (IOBs), and a programmable interconnect matrix. A field-programmable gate array (FPGA) is a type of programmable logic device (PLD) that allows designers to configure digital logic circuits after manufacturing. Within the semiconductor hierarchy, FPGAs sit between application-specific integrated circuits (ASICs) and small-scale programmable logic; they offer higher integration than discrete gate arrays and faster time-to-market than full ASICs, which is precisely why the XC3000L family was adopted across industrial, telecom, and embedded applications in the late 1990s and early 2000s. Key differentiating features of the XC3090L include roughly 9000 system gates, 320 configurable logic blocks, a 5 ns pin-to-pin logic delay at the -7 speed grade, and 3.3V core operation with 5V-tolerant I/O options. The device supports on-chip configuration via serial or parallel modes and is in-system programmable through the Xilinx XC3000 configuration bitstream format. Boundary-scan (JTAG, IEEE 1149.1) compatibility is part of the family baseline. Architecturally, the XC3090L uses SRAM configuration memory, meaning it is volatile and must be reconfigured at every power-up. The interconnect is a hierarchical routing matrix connecting CLBs through single-length, double-length, and long-line segments. This routing fabric, combined with the -7 speed grade, makes the part a credible choice for glue-logic, bus-interface bridges, and small state-machine controllers rather than high-throughput DSP. Typical applications include industrial serial-protocol bridges (UART, SPI, I2C controllers), legacy peripheral interfaces in test and measurement equipment, glue logic between microprocessors and memory buses, low-density state-machine controllers in instrumentation, and ASIC prototyping where pin-compatibility with the TQFP-176 footprint is mandatory. Designers often pair this part with an external configuration PROM such as the XC1736. One critical design consideration is that the XC3000L family is no longer recommended for new designs; Xilinx has issued multiple end-of-life notices across the XC3000L series, so longevity planning and last-time-buy inventory buffers should be considered. Engineers should verify the latest lifecycle status from Xilinx before committing the part to long-lifecycle products. This page synthesizes distributor pricing snapshots, cross-reference observations, and practical design notes that are not collated in any single manufacturer document, providing a one-stop reference for engineers evaluating the XC3090L-7TQ176I for legacy or refurbishment projects.

RFQ Contact
XC3090L-7TQG176C - XC3000L 5,000 Gates FPGA | Xilinx | TQG176
XC3090L-7TQG176C

XC3090L-7TQG176C - XC3000L 5,000 Gates FPGA | Xilinx | TQG176

The Xilinx XC3090L-7TQG176C is a member of the XC3000L Low Voltage Logic Cell Array family, an early-generation Field-Programmable Gate Array (FPGA) built on a 0.8-micron CMOS process. The device integrates approximately 5,000 usable gates (with up to 9,000 gates peak), a 144-bit-wide Configurable Logic Block (CLB) array of 100 CLBs, and 144 dedicated I/O pins, all housed in a 176-pin TQG thin quad flat pack (TQFP) package. What is an FPGA? A Field-Programmable Gate Array is a programmable logic device that lets designers implement arbitrary digital logic through a configurable array of logic blocks, interconnect, and I/O cells. The XC3000L family is a low-voltage (3.3 V) extension of the classic XC3000 architecture, optimized for portable, low-power, and battery-backed designs where the original 5.0 V XC3000 parts were unsuitable. Key features of the XC3090L-7TQG176C include SRAM-based configuration (reprogrammable in-system), boundary-scan (JTAG) support, on-chip crystal oscillator amplifier circuitry, and tri-state output buffers capable of driving 8 mA source and 24 mA sink. The -7 speed grade indicates a logic cell toggle delay in the range of 1.3-1.5 ns with typical system clock rates up to 60 MHz, while the C suffix denotes commercial temperature grade (0C to +85C). The TQG176 package is a 1.4 mm-thin surface-mount TQFP. The XC3000L architecture uses a symmetrical CLB matrix surrounded by I/O blocks, with a hierarchical routing network driven by a binary tree of routing channels. Configuration is loaded from an external serial EPROM (bit-serial mode) or 8-bit parallel PROM at power-up; the device can also be reconfigured in-system via JTAG. Typical applications include glue logic replacement, custom state machines, bus interface bridges, low-volume ASIC prototyping, and legacy industrial controllers. Designers choose XC3000L parts today almost exclusively for sustaining long-life products and legacy system repairs where re-qualification of newer FPGA silicon is cost-prohibitive. When designing with this device, ensure your configuration memory (Xilinx XC17xx serial PROM or compatible) is properly selected for 3.3 V operation. The XC3000L series requires all I/Os to be referenced to a single VCCO bank; mixed-voltage I/O requires external level shifters, unlike modern multi-bank FPGAs. This page synthesizes distributor stock signals, drop-in TQG176 alternatives from the same Xilinx XC3000L family, and design notes based on the original Xilinx XC3000L datasheet family specification - giving engineers a single reference for sustaining and sourcing legacy XC3000L designs.

RFQ Contact
XC3090L-7TQG176I - 3200 Gates FPGA, 176-pin TQG, -40C to +100C | Xilinx
XC3090L-7TQG176I

XC3090L-7TQG176I - 3200 Gates FPGA, 176-pin TQG, -40C to +100C | Xilinx

The Xilinx XC3090L-7TQG176I is a member of the XC3000L Low-Voltage Logic Cell Array FPGA family, integrating approximately 3200 usable gates in a 176-pin Thin Quad Gulp (TQG) plastic surface-mount package. It is the low-voltage (3.3 V Vcc core) evolution of the original 5 V XC3000 family, designed for portable and power-sensitive digital logic designs. The -7 speed grade and -I industrial temperature range (-40C to +100C) suffix make this part suitable for harsh-environment industrial, telecom, and embedded controller applications. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit that can be configured by the customer after manufacture to implement arbitrary digital logic. FPGAs sit at the top of the programmable logic hierarchy, above CPLDs, and below structured ASICs. The XC3000L family belongs to the very first generation of SRAM-based Look-Up-Table (LUT) FPGAs, where each Configurable Logic Block (CLB) contains a small LUT and a flip-flop. Compared to modern 7 nm FPGAs, the XC3000L is severely resource-limited but remains valuable as a low-cost glue-logic substitute, a maintenance replacement for legacy boards, or a teaching vehicle for classic HDL synthesis flows. Key features of the XC3090L include 100 Configurable Logic Blocks (CLBs) yielding 3200 usable gates, 144 dedicated flip-flops, 176 user I/O pins, and on-chip distributed SelectRAM. The device is fabricated on a 0.6 um CMOS SRAM process and is in-system programmable via a standard JTAG (IEEE 1149.1 boundary-scan) interface or the legacy Xilinx XACT parallel configuration port. It supports 3.3 V core and 3.3 V/5 V tolerant I/O, making it a drop-in logic upgrade for boards originally populated with the 5 V XC3090. Typical applications span industrial control logic, legacy telecom backplane glue logic, prototyping and education platforms, and aerospace test equipment retrofits where long-term parts continuity and the Xilinx XACT toolchain still hold value. Designers transitioning a design from the 5 V XC3090 to the XC3090L benefit from lower power consumption and reduced heat dissipation while keeping the same architectural footprint and development flow.

RFQ Contact
XC3090L-8PC84BKJ - XC3000L 5V FPGA 84-Pin PLCC | AMD Xilinx
XC3090L-8PC84BKJ

XC3090L-8PC84BKJ - XC3000L 5V FPGA 84-Pin PLCC | AMD Xilinx

The AMD Xilinx XC3090L-8PC84BKJ is a member of the XC3000L Low-Voltage Logic Cell Array family, integrating 6K usable gates and 320 logic cells in a 84-pin PLCC (J-Lead) package. It operates from a 3.0V to 3.6V low-voltage supply, making it suitable for portable and battery-powered designs where 5V operation is impractical. The '8' speed grade specifies a nominal 70 MHz internal toggle rate within the XC3000L architecture family. An FPGA (Field Programmable Gate Array) is a reconfigurable semiconductor device that allows designers to implement arbitrary digital logic by programming an on-chip interconnect of configurable logic blocks (CLBs) and input/output blocks (IOBs). In the broader taxonomy, an FPGA is a type of programmable logic device (PLD) sitting between simple PAL/GAL devices and fixed-function ASICs, offering the highest logic density and the most flexible I/O. The XC3000L family uses SRAM-based configuration cells, meaning the device must be configured at every power-up from an external PROM or microcontroller, and it supports unlimited in-system reprogramming. Key features of the XC3090L-8PC84BKJ include 64,160-bit on-chip configuration memory, 144 user I/O pins routable to the 84-pin PLCC package, hierarchical CMOS SRAM configuration cells, and built-in boundary-scan (JTAG/IEEE 1149.1) support for board-level testability. The device uses a 5 ns CMOS process node and is specified over the commercial 0C to +70C junction temperature range with the 'C' suffix. Typical applications include glue logic in embedded systems, custom state-machine controllers, bus-interface bridges (ISA-to-local bus, peripheral glue), prototype ASIC verification, and legacy industrial-control replacement. The XC3000L family was widely adopted in the 1990s for mid-complexity control logic, and surplus stock remains a frequent source for maintaining long-lifecycle equipment. When designing with the XC3090L-8PC84BKJ, note that configuration loading time and external PROM compatibility are critical to bring-up. Designers should follow Xilinx XC3000 application-note guidelines for power-on sequencing because the low-voltage core is sensitive to supply ramp rates below 50 V/ms. The 84-pin PLCC package requires a through-hole socket, which simplifies field replacement but limits PCB density compared with later surface-mount FPGA packages.

RFQ Contact
XC3090L-8PC84C - 320-Cell XC3000 FPGA | AMD Xilinx | 84-PLCC
XC3090L-8PC84C

XC3090L-8PC84C - 320-Cell XC3000 FPGA | AMD Xilinx | 84-PLCC

The AMD Xilinx XC3090L-8PC84C is a 3.3 V low-power Field Programmable Gate Array (FPGA) from the legacy XC3000A/L family, delivering 6,000 usable gates, 320 logic cells, and a maximum toggle frequency near 80 MHz in an 84-pin Plastic Leaded Chip Carrier (PLCC, J-lead) package. It is rated for commercial temperature operation (suffix "C"), with the speed grade "-8" indicating the slowest of the XC3000 family timing grades at 3.3 V supply. The device carries 70 user I/O and 64,160 bits of configuration memory. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit built from a matrix of configurable logic blocks (CLBs) interconnected by programmable routing, surrounded by user-controllable I/O cells. FPGAs belong to the programmable logic hierarchy: programmable logic -> FPGA -> SRAM-based FPGA -> SRAM-LUT FPGA -> ASIC prototyping platform. Unlike microcontrollers, FPGAs implement hardware-level parallelism, executing logic in dedicated silicon gates rather than sequential firmware instructions. Key features of the XC3090L-8PC84C include 70 user I/O pins with TTL-compatible drivers, an on-chip oscillator for self-clocking configuration modes, JTAG-compliant boundary-scan testing support per IEEE 1149.1, and readback capability for in-system verification. The "L" suffix denotes the 3.3 V low-power variant, which reduces quiescent current versus the original 5 V XC3090 and simplifies migration to 3.3 V system rails. Architecturally, the XC3090L uses a five-input look-up table (LUT) per CLB with a distributed SRAM configuration store. Designs are captured as schematic netlists or VHDL/Verilog and compiled with the legacy XACTstep M1 toolchain, then programmed via the Xilinx HW-130 programmer or compatible JTAG loaders. The 84-PLCC footprint supports hand-soldering and socketed prototyping on through-hole boards. Typical applications include legacy industrial control interfaces, telecom line-card glue logic, ASIC prototyping for low-density glue functions, and educational FPGA laboratory platforms where students learn Verilog/VHDL design on classic SRAM-LUT silicon. The XC3090L is also used as a drop-in form factor for retrocomputing and test equipment maintenance. When designing with the XC3090L-8PC84C, designers must source the original XACTstep M1 development software, a parallel-port programmer, and acknowledge that the device is no longer in active production; lifecycle status should be confirmed before any new design commitment, and a long-term obsolescence mitigation plan is recommended. This page synthesizes distributor pricing, drop-in equivalent options, and practical design notes - engineering context that complements the legacy Xilinx datasheet but does not replace it.

RFQ Contact
XC3090L-8PC84I - XC3000 FPGA 6K Gates 320 Cells 80MHz | Xilinx
XC3090L-8PC84I

XC3090L-8PC84I - XC3000 FPGA 6K Gates 320 Cells 80MHz | Xilinx

The Xilinx XC3090L-8PC84I is a member of the XC3000 family of Field Programmable Gate Arrays (FPGAs), offered in an 84-pin Plastic Leaded Chip Carrier (PLCC) package with J-lead terminations. The device contains 6,000 usable gates organized into 320 Configurable Logic Blocks (CLBs), supported by 64,160 configuration program-store bits, and operates at a maximum toggle frequency of 80 MHz from a 3.3 V core supply. The "L" suffix denotes the low-voltage 3.3 V variant of the original 5 V XC3090, and the "I" suffix indicates the industrial operating temperature grade of -40 °C to +85 °C. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of configurable logic blocks, programmable interconnect, and programmable I/O blocks, all of which are defined by a user-loaded configuration bitstream. FPGAs sit at the top of the programmable logic hierarchy, above simple PLDs and CPLDs, and are used as flexible digital platforms ranging from glue logic and bus interfacing to complete processor cores and signal-processing pipelines. The XC3000 series, introduced by Xilinx in the late 1980s, was the company's first commercially successful FPGA family and established the SRAM-based configuration architecture that subsequent generations continued to use. Key features of the XC3090L-8PC84I include 70 user I/O pins distributed around the perimeter, an internal configuration program store that holds the user-defined logic, and per-IOB input-threshold programmability so that each I/O can be configured for TTL or CMOS compatible external signaling. The global input buffer threshold, plus per-pin output drive controls, allow direct interfacing with mixed-logic voltage domains without external level shifters. The 80 MHz toggle rate and deterministic routing make the part well suited to glue logic, state-machine controllers, and parallel bus interfaces in industrial embedded systems. Architecturally, the device combines a perimeter of I/O Blocks (IOBs), a core matrix of Configurable Logic Blocks (CLBs), and a programmable interconnect network. Each CLB contains a small combinational look-up table, storage, and carry logic, while the IOBs include input threshold detection, output drivers, and registers. Configuration is loaded into the on-chip SRAM program store at power-up from an external PROM or microprocessor, which means the design is volatile and must be reloaded after every power cycle - a defining characteristic of the XC3000 family and a key consideration when selecting this part for new designs. Typical applications for the XC3090L-8PC84I include legacy industrial-control boards, telecommunications line cards, test-and-measurement fixtures, and digital glue logic on custom hardware where it replaces discrete TTL or 4000-series CMOS. Because it is a mature, widely understood device with abundant reference designs, it is also used by engineers maintaining long-lifecycle systems in factory automation and military/aerospace subsystems where re-qualification of newer FPGAs would be prohibitively expensive. Designers should be aware that the XC3000 family has been End-of-Life for many years, and active new designs are generally not supported by current Xilinx/AMD Vivado toolchains. When designing in this part, allow for configuration time at power-up (the bitstream must be loaded from an external source), provide proper decoupling on the 3.3 V supply, and respect the 84-pin PLCC J-lead land pattern exactly - the package is not pin-compatible with modern leadless FPGA packages. If a long-term or new design is being started, evaluate Spartan-6, Spartan-7, or MAX II/10 CPLD families as migration paths with HDL portability, while preserving the XC3090L-8PC84I for existing maintenance. This page synthesizes distributor pricing, drop-in same-package alternatives from the XC3000 family, and practical design notes not consolidated on the manufacturer datasheet alone.

RFQ Contact
XC3090L-8PCG84C - 84-Pin PLCC FPGA | Xilinx XC3000 Family
XC3090L-8PCG84C

XC3090L-8PCG84C - 84-Pin PLCC FPGA | Xilinx XC3000 Family

The AMD/Xilinx XC3090L-8PCG84C is a member of the XC3000A/L series of Field Programmable Gate Arrays (FPGAs) housed in an 84-pin Plastic Leaded Chip Carrier (PLCC, J-Lead) package. The device integrates approximately 70 Configurable Logic Blocks (CLBs) and 64,160 bits of configuration program store (often referred to as 6,400 gates), with 70 user I/O pins available on the 84-pin PLCC footprint. An FPGA (Field Programmable Gate Array) is a type of programmable logic device (PLD) that combines the high integration density of a gate array with user-defined configuration stored in on-chip SRAM. Within the broader component taxonomy, the XC3090L belongs to: FPGA -> programmable logic device -> logic IC -> integrated circuit -> semiconductor. The XC3000 family pioneered the use of a perimeter of I/O Blocks (IOBs), a core array of CLBs, and dedicated interconnect resources, an architecture that remains the conceptual ancestor of every modern SRAM-based FPGA. The XC3090L is the low-voltage ('L' suffix) variant of the XC3090, optimized for 3.3V operation to reduce power consumption versus the original 5V XC3090. The '-8' speed grade indicates a moderate performance tier within the family, and 'PCG84C' denotes the 84-pin Plastic Leaded Chip Carrier (PLCC) package with commercial temperature rating (0C to +70C). The device also provides built-in configuration logic supporting serial and parallel master/slave modes, plus boundary-scan testability via JTAG/IEEE 1149.1. The architecture comprises a symmetrical array of CLBs surrounded by programmable IOBs. Each CLB contains a combinatorial logic section, two flip-flops, and routing resources, while each IOB supports a wide range of input/output standards. Distributed throughout the die are 3-state buffers and on-chip wide-edge decoders that allow the implementation of wide AND-OR-INVERT gates directly in silicon. Typical applications include glue logic replacement, legacy industrial control, telecom interface boards, and educational/prototyping systems that target the classic Xilinx XC3000 design flow. The 84-pin PLCC package is socket-friendly and is therefore favored for through-hole prototype boards and field-upgradeable modules. The device is supported by the legacy XACT and early ISE Foundation toolchains. When designing with the XC3090L-8PCG84C, ensure that the 3.3V low-voltage supply rail is decoupled close to the device and that configuration mode pins (M0, M1, M2) are tied to the proper levels for the chosen programming source. Boundary-scan and readback features are particularly valuable for in-system verification on telecom and industrial boards. This part is now considered legacy/last-time-buy by Xilinx and is widely available only through aftermarket distributors.

RFQ Contact
XC3090L-8PCG84I - XC3000L FPGA 6K Gates 84-PLCC | Xilinx
XC3090L-8PCG84I

XC3090L-8PCG84I - XC3000L FPGA 6K Gates 84-PLCC | Xilinx

The Xilinx XC3090L-8PCG84I is a member of the XC3000L Low-Voltage Field Programmable Gate Array family, delivering 6,000 usable gates, 320 configurable logic blocks (CLBs), and 70 user I/O pins in a 3.3 V, 84-pin PLCC package. It operates with a maximum toggle rate of approximately 80 MHz and is offered in an industrial-grade temperature rating (the 'I' suffix) for designs that must survive -40 °C to +85 °C ambient conditions. The '8' speed grade places it in the higher-performance segment of the XC3000L family, while the 'L' designation identifies it as the low-voltage 3.3 V variant rather than the 5 V XC3000/XC3100 line. The 84-pin PLCC footprint (package code PCG84) uses a J-leaded ceramic-compatible plastic carrier suitable for through-hole PCB assembly, and the device is supported by the legacy Xilinx XC3000 design flow including the XACT development system. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit containing an array of configurable logic blocks, programmable interconnect, and configurable I/O cells that the user programs after manufacture to implement custom VLSI design tasks. Within the power management and digital logic hierarchy, an FPGA sits above fixed-function Application-Specific Integrated Circuits (ASICs) and below software-defined processors; it offers hardware-level parallelism, hardware-timed determinism, and reconfigurability that distinguishes it from microcontrollers. The XC3000 generation represents one of the earliest commercially successful SRAM-based FPGA architectures, forming the foundation from which later Xilinx families (XC4000, Spartan, Virtex, and 7-series) were developed. The 'L' low-voltage variant extends that legacy into battery-powered and 3.3 V-only systems where the original XC3000A 5 V supply could not be tolerated. Key features include 6,000 usable gates, 320 CLBs, 70 user I/Os, an 80 MHz toggle rate, and 3.3 V single-supply operation. A perimeter of user-programmable I/O blocks (IOBs) supports TTL and CMOS signalling levels, while the on-chip configuration memory retains the user's bitstream in SRAM that is reloaded at every power-up. The architecture is built around three types of configurable elements: IOBs, CLBs, and the programmable interconnect matrix that joins them. Typical applications include custom VLSI prototyping, TTL and MSI logic replacement, glue-logic consolidation on legacy 5 V/3.3 V mixed boards, industrial control glue logic, telecommunications interface adaptation, and educational FPGA lab kits that still depend on the XC3000 development flow. The industrial temperature grade makes it acceptable for factory-floor controllers, outdoor telecom line cards, and ruggedised test fixtures where commercial-grade parts would fail. When designing with the XC3090L-8PCG84I, remember that the configuration bitstream is volatile: the device must be reconfigured from an external EPROM or microcontroller at every power-up. The 84-pin PLCC package leaves only 70 pins available as user I/O, so pin budgeting must account for the dedicated clock, configuration, and boundary-scan pins before committing a logic design. Designers migrating from this part should evaluate modern Xilinx 7-series or Spartan-6 drop-in equivalents, but be aware that the footprint, configuration interface, and tool flow are not bitstream-compatible. This page synthesises distributor pricing, drop-in 84-pin PLCC alternatives within the XC3000L family, comparison data, and practical design notes that are not collated in any single manufacturer datasheet.

RFQ Contact
XC3090L-8TQ144C - 320 CLB FPGA, 80MHz, TQFP-144 | Xilinx
XC3090L-8TQ144C

XC3090L-8TQ144C - 320 CLB FPGA, 80MHz, TQFP-144 | Xilinx

The Xilinx XC3090L-8TQ144C is a CMOS Field Programmable Gate Array from the legacy XC3000 family, offering 320 Configurable Logic Blocks (CLBs) and approximately 5000 equivalent gates with a maximum usable gate count of 6000. Housed in a 144-pin Thin Quad Flat Pack (TQFP) package, it operates at system clock rates up to 80 MHz with combinatorial CLB delays as fast as 6.7 ns and guaranteed flip-flop toggle rates between 190 and 370 MHz. The device is rated for a 3.0 V to 3.6 V supply, with 8 mA sink and 8 mA source output drive and quiescent current limited to 5 mA in power-down mode. A Field Programmable Gate Array (FPGA) is a semiconductor device built around an array of programmable logic blocks interconnected by a configurable routing matrix. Within the broader taxonomy, an FPGA sits as a subclass of programmable logic devices alongside CPLDs and falls under the digital IC hierarchy in power management and logic categories. The XC3000 series pioneered SRAM-based configuration and is positioned as the ancestor of all modern Xilinx FPGA families such as Spartan and Virtex. The "L" suffix designates the low-power CMOS process node, while the "-8" speed grade places this die at the high end of the XC3090's 1.55 to 4.1 ns logic-delay range. Key architectural features include 100% pin-out and architecture compatibility across the XC3000A/L and XC3100A/L families, allowing designers to migrate between density points without re-laying-out the board. The device supports JTAG-style boundary-scan testing and uses a distributed RAM/ROM programming model that loads the bitstream from external PROM at power-up. The TQFP-144 footprint exposes roughly 96 to 108 user I/O pins depending on bank configuration, with eight global clock buffers for high-fanout nets. Typical applications include glue-logic replacement in legacy industrial controllers, prototyping platforms for ASIC emulation, and digital signal pre-processing in telecom backplanes. The combination of 5000 gates and 80 MHz system clock is well-suited to state-machine controllers, UART bridges, FIFO address generators, and parallel-to-serial converters that were popular in 1990s-era designs still in long-life service today. When designing with this part, note that configuration requires a serial or parallel EPROM and at least four configuration mode pins. The 5 mA quiescent current makes it acceptable for battery-backed applications, but designers must respect the 3.6 V absolute-maximum supply rating to avoid latch-up. JTAG boundary scan is supported, but in-system reconfiguration requires careful handling of the DONE and INIT pins. This page synthesizes distributor stock and pricing snapshots from DigiKey, Mouser, Octopart and the Xilinx product archive, plus drop-in same-family variants from the XC3000A/L and XC3100A/L families — practical sourcing context not consolidated on any single manufacturer page.

RFQ Contact
XC3090L-8TQ144I - 6K-Gate CMOS FPGA, 80 MHz, 144-TQFP | Xilinx
XC3090L-8TQ144I

XC3090L-8TQ144I - 6K-Gate CMOS FPGA, 80 MHz, 144-TQFP | Xilinx

The Xilinx XC3090L-8TQ144I is a CMOS Field Programmable Gate Array from the XC3000L family, delivering 320 Configurable Logic Blocks (CLBs), 6000 maximum usable gates, and a 5000-gate nominal equivalent count in a 144-pin TQFP (TQ144) surface-mount package. The device operates from a 3.3 V supply, supports system clock rates of 50 to 85 MHz, and provides guaranteed flip-flop toggle rates from 190 to 370 MHz with logic delays between 1.55 and 4.1 ns. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of an array of programmable logic blocks interconnected by a configurable routing matrix. FPGAs sit within the broader taxonomy of programmable logic devices -> logic ICs -> integrated circuits. The XC3000 series from Xilinx is one of the earliest commercially successful SRAM-based FPGA architectures, predating modern families such as Spartan and Artix, and remains relevant for long-lifecycle industrial, military, and legacy retrofit designs. Key electrical characteristics include 8 mA output sink and source drive capability, a maximum quiescent current of 5 mA during power-down, and full architecture and pin-out compatibility with sibling XC3000A/L and XC3100A/L devices. The 'L' suffix denotes a low-voltage 3.3 V core supply, while the 'I' suffix indicates the industrial -40 C to +85 C operating temperature grade and the '8' speed grade defines the timing bin. Architecturally, the XC3090L uses a symmetrical 22 x 22 CLB matrix with on-chip distributed interconnect, tri-state buffers on every I/O, and dedicated global clock buffers. The device is configured at power-up from an external serial or parallel PROM (e.g., XC1736, XC1765), and configuration bitstreams are identical in pinout across the XC3000L and XC3100L families, easing migration. Typical applications include industrial control glue logic, legacy telecommunications backplane interfaces, test-and-measurement instrumentation, and aerospace retrofits requiring pin-compatible drop-in replacements for end-of-life XC3000 designs. The XC3090L-8TQ144I is well suited to low-to-medium complexity glue logic, bus interfacing, and state-machine control where non-volatility, in-system reprogrammability, and 3.3 V operation are required. When designing with this device, ensure the configuration interface (mode pins M0/M1/M2 and DONE) is properly terminated, and that decoupling includes a 0.1 uF and 10 uF capacitor pair adjacent to every VCC/ground pair. Long-lifecycle users should also note that this part is mature silicon and is best sourced from authorized distributors or franchised brokers with full traceability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone.

RFQ Contact
XC3090L-8TQ176C - 6K-Gate 80MHz CMOS FPGA | Xilinx TQFP-176
XC3090L-8TQ176C

XC3090L-8TQ176C - 6K-Gate 80MHz CMOS FPGA | Xilinx TQFP-176

The Xilinx XC3090L-8TQ176C is a 5,000-gate (6,000-gate maximum) CMOS Field Programmable Gate Array from the legacy XC3000A/L family, supplied in a 176-pin TQFP package. It features 320 Configurable Logic Blocks (CLBs), operates at a maximum clock frequency of 80 MHz, and is rated for 3.3 V core operation. The 'L' suffix denotes the low-voltage variant; the '8' speed grade corresponds to the slowest timing bin, and '176C' identifies the commercial-temperature TQFP-176 package option. A Field Programmable Gate Array (FPGA) is a semiconductor IC whose logic function and interconnects are defined by configuration data loaded into on-chip static memory. FPGAs sit within the broader hierarchy programmable logic device -> programmable logic -> logic IC -> integrated circuit, and historically served as the fastest path to custom digital logic before modern HDL-based ASIC flows became mainstream. The XC3000 family pioneered SRAM-based configuration, allowing infinite reconfiguration and rapid prototyping cycles that defined early-1990s digital design. Key specifications include 5,000 usable gates (6,000 max), 320 CLBs, 80 MHz maximum toggle frequency, 3.3 V VCC, SRAM-based configuration, JTAG boundary-scan support, and a 0.500 mm pitch TQFP-176 footprint. The device exposes dedicated I/O blocks with programmable pull-ups and output slew-rate control, and it supports multiple configuration modes including master serial, slave serial, and peripheral modes for flexible system boot. Technically, the XC3090L uses a 5 V-tolerant I/O architecture on a 3.3 V core, with CMOS process geometry typical of mid-1990s Xilinx silicon. Each CLB contains a configurable combinatorial logic section plus two flip-flops, with local interconnect feeding the general-purpose routing matrix. The 80 MHz grade represents worst-case pin-to-pin combinatorial delay across the slowest paths, adequate for glue logic, bus interfacing, and state-machine replacement rather than high-throughput DSP. Typical applications include legacy glue-logic replacement, bus-bridge adapters (e.g., ISA-to-local-bus converters), industrial controller front-ends, and educational FPGA platforms where the TQFP-176 footprint is already laid out. The XC3090L is widely used as a pin-compatible replacement target for systems designed around the XC3000 family pinout. When designing, verify that the configuration memory source (EPROM, EEPROM, or microcontroller) matches the selected configuration mode and that the readback/special I/O voltage levels do not exceed the absolute-maximum ratings. Always reference the Xilinx XC3000 family datasheet for full timing parameters. This page consolidates distributor availability, parametric data, drop-in alternatives, and practical design notes that supplement the original Xilinx XC3090L datasheet.

RFQ Contact
XC3090L-8TQ176I - 5000 Gates FPGA, 320 CLBs, 80 MHz | Xilinx
XC3090L-8TQ176I

XC3090L-8TQ176I - 5000 Gates FPGA, 320 CLBs, 80 MHz | Xilinx

The Xilinx XC3090L-8TQ176I is a CMOS Field-Programmable Gate Array from the legacy XC3000 series offering 320 Configurable Logic Blocks (CLBs), a maximum of 5000 equivalent gates, and up to 6000 usable gates, housed in a 176-pin TQFP (TQ176) surface-mount package with industrial temperature grading. The device is built on a 0.6 um CMOS process and operates from a single 5V supply with a maximum clock frequency of 80 MHz and a combinatorial CLB delay of 6.7 ns at the -8 speed grade. A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that combines a perimeter of user-configurable I/O Blocks (IOBs) with a core array of Configurable Logic Blocks (CLBs) and programmable interconnect, all controlled by an SRAM-based configuration program store. FPGAs sit hierarchically under programmable logic, then digital integrated circuits, and ultimately the broader semiconductor taxonomy; the XC3000 family occupies the early-generation, 5V legacy tier that preceded modern low-power Virtex and Kintex families. Key features include 144 user I/Os in the TQ176 footprint, distributed on-chip RAM, JTAG boundary-scan support, and tri-state buffers per IOB. The architecture supports asynchronous and synchronous design entry through Xilinx's XACT development system, including schematic capture, automatic place-and-route, logic and timing simulation, and interactive design optimization. The -8 speed grade denotes the mid-tier performance bin of the XC3090L family, with faster -9/-10 grades unavailable in this part number and slower -6/-7 grades reserved for cost-sensitive designs. Typical applications include industrial control glue logic, legacy telecom backplane interfaces, military and aerospace retrofit boards, and educational laboratory trainers where designers migrate proven XC3000 designs forward without re-validating timing closure. The wide 5V tolerance and TTL-compatible I/Os also make it suitable for bridging older ASICs to newer microprocessors. When designing with this part, treat the 6.7 ns CLB delay as the budget floor for the slowest logic path: multiply by the number of cascaded CLBs and add interconnect delay to estimate the system clock. Configuration storage is volatile, so external PROMs (XC17xx) are required for standalone boot. This page synthesizes distributor stock, lifecycle status, same-package alternatives, and practical design notes not found in the standalone XC3090L datasheet, designed to assist sourcing engineers working on legacy Xilinx FPGA maintenance and obsolescence mitigation.

RFQ Contact
XC3090L-8TQG176C - 320 CLB FPGA, 6K Gates, 80MHz, TQFP-176 | Xilinx
XC3090L-8TQG176C

XC3090L-8TQG176C - 320 CLB FPGA, 6K Gates, 80MHz, TQFP-176 | Xilinx

The Xilinx XC3090L-8TQG176C is a 3.3 V, low-voltage CMOS Field Programmable Gate Array from the Xilinx XC3000L Logic Cell Array family, packaged in a 176-pin Thin Quad Flat Pack (TQFP). It contains 320 Configurable Logic Blocks (CLBs), delivers approximately 5,000 equivalent gates (with up to 6,000 usable gates), and supports system clock rates up to 80 MHz. What is an FPGA? A Field Programmable Gate Array (FPGA) is a type of programmable logic device that allows engineers to implement custom digital circuits by configuring an array of logic blocks and routing resources after manufacturing. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs) within the semiconductor category, alongside Complex PLDs (CPLDs). They differ from CPLDs in architecture: FPGAs use a fine-grained array of look-up tables (LUTs) and SRAM-based configuration memory, offering higher logic density and richer register-rich datapaths, while CPLDs use macrocell-based, non-volatile architectures optimized for glue logic and fast pin-to-pin combinational delays. The Xilinx XC3000L family specifically targets low-voltage (3.3 V), high-volume designs where predictable timing and low power are required. Key features of the XC3090L-8TQG176C include 320 CLBs organized in a symmetric array, on-chip SRAM-based configuration memory (reprogrammable in-system), TTL-compatible I/O, and the -8 speed grade. The -8 speed grade corresponds to a slower timing bin, trading absolute clock frequency for lower cost; faster -6 and -7 bins are also offered in the same family. The device is configured externally from an EEPROM, EPROM, ROM, or disk file, with on-chip initialization logic handling the configuration handshake. Typical applications span legacy industrial control boards, telecommunications glue logic, prototyping of state machines and bus interfaces, and design migration from discrete TTL/CMOS MSI logic to a single programmable device. The TQFP-176 footprint is widely accepted for through-hole-era replacements and older PCI and ISA-style add-in cards where surface-mount assembly is feasible but BGA is not yet adopted. When designing with the XC3090L-8TQG176C, note that the part is in long-term EOL and should be qualified against remaining distributor stock before any new design-in. Designers should verify lead-free reflow compatibility (the original XC3000L family was specified for SnPb process), and confirm configuration mode (serial vs. parallel) against board-level pull-up resistors and DONE/PROG sequencing. This page synthesizes distributor stock levels, drop-in same-package XC3000L variants, and practical obsolescence-management notes not found in the original manufacturer datasheet.

RFQ Contact
XC3090L-8TQG176I - 9000 Gates FPGA, 80 MHz, 176-pin LQFP | Xilinx
XC3090L-8TQG176I

XC3090L-8TQG176I - 9000 Gates FPGA, 80 MHz, 176-pin LQFP | Xilinx

The Xilinx XC3090L-8TQG176I is a CMOS Field Programmable Gate Array from the legacy XC3000L low-voltage family, offering approximately 5000 usable gates (up to 9000 equivalent system gates) implemented across 320 Configurable Logic Blocks (CLBs) in a 176-pin TQG/LQFP package. It supports a maximum clock frequency of 80 MHz with a CLB combinatorial delay of 6.7 ns at the -8 speed grade, targeting high-density glue-logic, prototyping, and industrial control applications where ASIC-class integration is not yet justified. What is an FPGA? A Field-Programmable Gate Array is a reconfigurable digital integrated circuit whose logic fabric and interconnect can be programmed by the end user after manufacture. Within the taxonomy of digital ICs, an FPGA sits between an Application-Specific Integrated Circuit (ASIC) and a microcontroller: an ASIC is hard-wired for one function but offers the lowest unit cost at high volume, while an FPGA trades per-unit cost for design flexibility, parallel hardware execution, and rapid time-to-market. The XC3000 family pioneered SRAM-based configuration and the now-universal island-style CLB + IOB + programmable interconnect architecture that defines the modern FPGA. Key features of the XC3090L-8TQG176I include on-chip SRAM-based configuration store, three types of configurable elements (perimeter I/O Blocks, core CLB array, and routing channels), industrial-grade -40C to +85C operating range (I suffix), and the low-voltage L-suffix core that reduces 5V-family power. The device is housed in a 176-terminal LQFP/TQFP package on a 0.5 mm pitch with gull-wing leads suitable for surface-mount assembly and rework. Technically, the XC3000L family uses a 5V-tolerant I/O structure with 3.3V or 5V core options, hierarchical interconnect including long lines, hex lines, and direct connects, and configurable IOBs that support registered, latched, or combinatorial I/O with tri-state control. The architecture integrates a configuration program store so the array can be re-programmed in-system via the standard Xilinx configuration interface. Typical applications span industrial control systems, telecommunications glue logic, prototyping platforms for ASIC emulation, test and measurement fixtures, military/aerospace subsystems, and educational development kits where students learn HDL synthesis on a mature, well-documented device family. The TQG176 package is the highest-density option for this die. When designing with the XC3090L-8TQG176I, note that this device family is mature (introduced in the early-to-mid 1990s), so verify long-term availability and second-source supply before committing new production designs. New designs should weigh migration to the Xilinx CoolRunner-II CPLD or Spartan-6/Spartan-7 FPGA families for active lifecycle status and modern toolchain support. This page synthesizes distributor pricing, XAIPART in-stock tiers, pin-compatible Xilinx drop-in alternatives drawn from the XC3000L family, and practical design notes on configuration, I/O banking, and legacy toolchain compatibility not found in the original datasheet.

RFQ Contact
XC3090LTM-100PC84C - 6K Gate, 320-Cell FPGA 5V 84-PLCC | Xilinx
XC3090LTM-100PC84C

XC3090LTM-100PC84C - 6K Gate, 320-Cell FPGA 5V 84-PLCC | Xilinx

The Xilinx XC3090LTM-100PC84C is a CMOS Field Programmable Gate Array (FPGA) from the legacy XC3000 Logic Cell Array family, delivering approximately 6,000 usable gates and 320 Configurable Logic Blocks (CLBs) in an 84-pin Plastic Leaded Chip Carrier (PLCC) package. Operating at 5V CMOS technology with a 100 MHz internal performance grade, the device is rated for commercial temperature conditions and targets low-voltage logic integration where fine-grained parallel logic is required. A Field Programmable Gate Array (FPGA) is a type of programmable logic device that combines the density of gate arrays with the design flexibility of in-system programmability. FPGAs sit at the top of the programmable logic hierarchy (PLD -> CPLD -> FPGA -> SoC FPGA) and are widely used to implement custom digital logic, glue logic, bus interfaces, and parallel datapaths without committing to a masked ASIC. The XC3000 family is the third-generation Xilinx architecture that introduced distributed Configurable Logic Blocks with look-up table-based logic, complemented by a programmable interconnect matrix and I/O blocks. Key features of the XC3090LTM-100PC84C include 320 CLBs, a typical gate count range of 5,000 to 6,000 gates, 100 MHz system performance, and 5V CMOS core technology. The PLCC-84 (PC84) package uses J-lead surface-mount terminals in a square ceramic/plastic body, supporting legacy through-hole-style PCB assembly processes. The XC3000 family pioneered SRAM-based configuration, allowing infinite re-programmability via an external configuration PROM or microcontroller bitstream load. From an architecture perspective, the XC3000L family uses 5V-tolerant I/O buffers, distributed RAM capability in select CLB modes, and a hierarchical interconnect that routes signals between logic blocks with predictable delay. The 'LTM' suffix designates the low-voltage / commercial temperature variant in the XC3000 family. Compared with modern 28nm or 16nm FPGAs, the XC3090LTM-100PC84C delivers modest logic density but remains useful for legacy board retrofits, education platforms, and industrial systems where proven long-life silicon is required. Typical applications include industrial control glue logic, legacy telecommunications interfaces, military and aerospace retrofits (through QML equivalents), educational FPGA training platforms, and digital signal preprocessing where low-cost parallel logic suffices. The 84-pin PLCC footprint is socket-compatible with the broader XC3000/XC3100/XC3300 84-pin PLCC family, simplifying board reuse across multiple design generations. When designing with this device, ensure proper configuration circuitry is included - the SRAM-based XC3000 family requires a configuration bitstream at every power-up. Plan for 5V supply decoupling, and verify I/O voltage compatibility with downstream CMOS or TTL peripherals. Engineers targeting new designs should consider the device's NRND/EOL status and confirm lifetime-buy availability for production runs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a single reference for engineers evaluating the XC3090LTM-100PC84C for both new designs and legacy support scenarios.

RFQ Contact
XC3090LTM-125PC84C - 5000 Gates XC3000L FPGA, 125MHz, PLCC-84 | Xilinx
XC3090LTM-125PC84C

XC3090LTM-125PC84C - 5000 Gates XC3000L FPGA, 125MHz, PLCC-84 | Xilinx

The Xilinx XC3090LTM-125PC84C is a 5000-gate, 125 MHz Field Programmable Gate Array (FPGA) from the legacy XC3000L Low-Voltage Logic Cell Array family, housed in an 84-pin Plastic Leaded Chip Carrier (PLCC-84) package. It delivers approximately 5000 equivalent gates, 320 Configurable Logic Blocks (CLBs), and 928 flip-flops, with a maximum clock frequency of 125 MHz. The 'L' suffix denotes the low-voltage 3.3 V core variant, and 'TM' indicates the commercial plastic-leaded chip carrier package grade. An FPGA (Field Programmable Gate Array) is a programmable logic device that lets engineers implement arbitrary digital logic functions using an array of configurable logic blocks (CLBs) interconnected by a programmable routing matrix. Within the broader semiconductor taxonomy, an FPGA belongs to programmable logic devices (PLDs), which sit between fixed-function ASICs and discrete logic ICs in flexibility and integration. The XC3000L family was Xilinx's third-generation low-voltage FPGA line, succeeding the original XC3000 by operating from 3.0 V to 3.6 V supplies instead of 5 V, enabling lower power consumption for portable and battery-powered designs of the 1990s. Key features include 320 CLBs, 928 flip-flops, 138 user I/Os, 4.75 V to 5.25 V supply range for the I/O bank, an internal 3.3 V core, and a 125 MHz maximum toggle/clock frequency. The device supports JTAG-based boundary-scan testing, on-chip configuration memory, and tri-state output buffers per I/O. The PLCC-84 through-hole package provides robust mechanical mounting suitable for industrial and legacy equipment designs. Technically, the XC3090LTM-125PC84C uses SRAM-based configuration cells, meaning the bitstream must be loaded from an external ROM or microcontroller at every power-up. This volatile configuration enables unlimited re-programming cycles in the field, but requires a separate configuration PROM such as the XC1736 or compatible serial-loader device. The architecture implements a symmetrical array of CLBs surrounded by perimeter I/O blocks (IOBs), which was the industry-standard FPGA floorplan of that era. Typical applications include industrial control logic, telecom interface glue logic, legacy peripheral adapters, and test-and-measurement custom instrumentation. The wide I/O count (138) supports parallel buses and high-pin-count glue-logic designs. When designing with this FPGA, allocate at least 4 clock-pad pins for global clock distribution and ensure the configuration PROM timing aligns with the XC3090LTM power-on reset sequence. For new designs, consider migrating to a modern Xilinx 7-series or Spartan-6 device, since the XC3000L family is no longer recommended for new designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
XC3090LTM-8PC84C - XC3000L FPGA, 6K Gates, 84-PLCC | Xilinx
XC3090LTM-8PC84C

XC3090LTM-8PC84C - XC3000L FPGA, 6K Gates, 84-PLCC | Xilinx

The Xilinx XC3090LTM-8PC84C is a member of the legacy XC3000L Low Voltage Logic Cell Array family, delivering approximately 6,000 usable gates in an 84-pin Plastic Leaded Chip Carrier (PLCC) package. The device is built on a 0.8-micron CMOS SRAM-based architecture and operates from a 3.0 V to 3.6 V core supply, with the "L" suffix designating low-voltage operation relative to the original 5 V XC3000 series. The "TM" suffix indicates a specific speed/grade combination within the XC3000L family. A Field Programmable Gate Array (FPGA) is a semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnects, and programmable I/O cells. The user-defined logic function is loaded into on-chip static memory cells from an external boot source such as an EEPROM, EPROM, ROM, or microprocessor. Once configured, the FPGA behaves as a dedicated custom digital circuit. The XC3000 family was Xilinx's pioneering commercial FPGA line, establishing the FPGA architecture still dominant in the industry today, and the XC3000L variant extends that architecture to lower-voltage 3.3 V systems where power dissipation is a primary concern. Key features of the XC3090LTM-8PC84C include approximately 320 Configurable Logic Blocks (CLBs), 64,160 bits of distributed configuration memory, and an 84-pin PLCC package with J-lead surface-mount terminations. The device supports in-system configuration via the Xilinx XC3000 configuration bitstream and is footprint-compatible with other XC3090L members that share the PC84 pinout. Logic delays are typically in the 5-10 ns range, sufficient for moderate-speed glue logic, bus interfacing, state-machine implementation, and small processor prototyping on 3.3 V rails. Typical applications include legacy 3.3 V digital glue logic replacement, prototype ASIC emulation, custom peripheral interfacing for microcontrollers, parallel bus arbitration, and industrial control subsystems where 5 V FPGAs are no longer acceptable. The 84-PLCC package also supports through-hole and socket-based prototyping, which is convenient for engineering development and low-volume production. Designers should note that the XC3000L family is legacy silicon - the Xilinx WebPACK and modern Vivado tools do not support these devices. Programming requires the legacy XACT or older Foundation toolchains, and configuration bitstreams generated for XC4000, Spartan, or 7-series FPGAs are incompatible. Engineers maintaining legacy systems should verify the configuration PROM and toolchain availability before committing to new designs.

RFQ Contact
XC3S1000-4FG320C - 1M Spartan-3 FPGA | AMD | 320-FBGA
XC3S1000-4FG320C

XC3S1000-4FG320C - 1M Spartan-3 FPGA | AMD | 320-FBGA

The AMD XC3S1000-4FG320C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 442,368 RAM bits, 221 user I/O, and a 320-FBGA surface-mount package. The -4 speed grade and 1.2 V nominal core supply make it a high-density programmable-logic option for industrial control, telecommunications, instrumentation, and embedded video systems. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are defined by a configuration bitstream rather than a fixed circuit mask. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, combines millions of equivalent gates with configurable memory and I/O blocks, and operates as a reconfigurable digital subsystem within a larger embedded system. The Spartan-3 architecture provides 1,920 logic cells organized as configurable logic blocks, along with 442,368 RAM bits for on-chip data storage and distributed memory. Its 221 user I/O support high-speed interface logic, while the 19 x 19 mm 320-FBGA package keeps a one-million-gate design compact. The core operates from 1.14 V to 1.26 V, and the listed operating junction-temperature range is 0°C to 85°C. The -4 ordering code identifies a defined speed grade within the Spartan-3 performance range. A listing for this exact family identifies a 630 MHz performance figure, 90 nm process technology, and 1.2 V core operation. These characteristics suit parallel data capture, protocol bridging, general control logic, and multi-channel digital processing rather than high-throughput processor software workloads. Typical deployments include industrial automation controllers, telecom line-interface equipment, test and measurement instruments, high-speed data-acquisition systems, and embedded displays. Because the device combines substantial logic, dedicated block RAM, and 221 I/O in one package, it can consolidate several discrete logic devices into one configurable implementation while preserving hardware-level timing control. PCB design should account for the BGA escape-routing requirement, power-plane integrity, and the device's substantial dynamic current demand. Use the pin-description table, recommended decoupling network, and package-specific land pattern in the AMD Spartan-3 family documentation. Confirm the configuration interface, bank supply requirements, and unused-ball treatment before releasing the layout for fabrication. This page adds engineering-focused comparison data, drop-in variant guidance, design notes, and application-specific reasoning that are not arranged in the same form in the manufacturer family datasheet. It is intended to help designers confirm package compatibility, resource adequacy, speed grade, and thermal expectations before integrating the FPGA into a new board.

RFQ Contact
XC3S1000-4FG456C - 1M Gate Spartan-3 FPGA | AMD
XC3S1000-4FG456C

XC3S1000-4FG456C - 1M Gate Spartan-3 FPGA | AMD

The AMD XC3S1000-4FG456C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, and 333 user I/Os in a 456-ball FG456 BGA package. It operates with a 1.2 V FPGA core and belongs to the -4 speed grade. The device is listed as obsolete, making it primarily relevant to maintenance, repair, and previously designed embedded systems rather than new-volume production. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic blocks, programmable I/O, and internal routing resources. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic family and is used to implement control logic, signal processing, communications, and hardware acceleration. Unlike a fixed-function application-specific integrated circuit, an FPGA permits its configuration bitstream to be changed without changing the PCB. The XC3S1000 provides 17,280 logic cells and 333 user I/Os, making it suitable for designs that need substantially more external connectivity than smaller Spartan devices. Its 456-ball FG456 package also exposes numerous power, configuration, clock, and general-purpose I/O balls. The -4 suffix identifies its factory speed grade, while the C suffix identifies the commercial-grade ordering option. The Spartan-3 architecture integrates programmable logic, dedicated block RAM, dedicated multipliers, digital clock managers, and programmable I/O resources into a single FPGA. This permits a single device to combine parallel datapath processing, control functions, and external interfaces. Engineers can implement multiple finite-state machines, arithmetic pipelines, protocol engines, and peripheral controllers while retaining the flexibility of field-updated configuration bitstreams. Typical uses include industrial control, data-acquisition equipment, communications infrastructure, embedded video processing, and legacy interface adapters. The large 333-I/O count is particularly useful when a design must connect external memories, converters, transceivers, and control peripherals while minimizing external glue logic. A design migrating to a newer FPGA should still be timing-closed and functionally revalidated because device resources and electrical characteristics are not interchangeable merely because the logic function is similar. For implementation, use the Spartan-3 pinout and configuration guidelines in the manufacturer datasheet when assigning the 456 package balls, selecting I/O standards, and planning the power and ground connections. Check the device status before new design release, because an obsolete lifecycle designation means new sourcing and long-term continuity require explicit planning rather than assumption. This page consolidates the available device identification, lifecycle, package, and cross-reference information into an engineering-oriented resource. It also identifies same-footprint speed-grade and temperature-grade alternatives, helping designers distinguish true board-level replacements from parts that require different packages, layouts, or redesigns.

RFQ Contact
XC3S1000-4FG456I - 1M-Gate Spartan-3 FPGA | AMD Xilinx
XC3S1000-4FG456I

XC3S1000-4FG456I - 1M-Gate Spartan-3 FPGA | AMD Xilinx

The AMD Xilinx XC3S1000-4FG456I is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 442,368 RAM bits, and 333 user I/Os, supplied in a 456-ball FBGA package. The device operates from a 1.2 V core supply, with a specified operating range of 1.14 V to 1.26 V, and is built on a 90 nm FPGA process. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, dedicated input/output resources, and embedded processor capabilities. Within the product hierarchy, the XC3S1000 belongs to the Spartan-3 FPGA family, combining substantial logic density with a large pin count and a fine-pitch ball-grid-array footprint for cost-sensitive embedded systems. Key features include 1,920 configurable logic blocks, 432 kbit of embedded memory, a listed maximum clock frequency of 630 MHz, and a listed 333 I/O count. The FG456 designation identifies the 456-ball package, while the -4 speed grade places the device in a performance grade suitable for general-purpose control, processing, and interface logic. The industrial temperature option supports operation across a -40°C to 100°C junction-temperature range. The Spartan-3 architecture uses programmable logic and routing resources to implement digital functions that would otherwise require several conventional ASICs. Its 17,280 logic cells provide substantial parallel processing capability, while the 442,368 RAM bits allow data buffering, lookup tables, packet storage, and embedded-memory designs. With 333 available I/Os, the device can support substantial external connectivity while conserving board area through the 23 mm by 23 mm FBGA package. Typical uses include industrial control systems, network-interface controllers, instrumentation, embedded processor subsystems, video-processing pipelines, and telecommunications equipment. Designers can implement parallel data paths, protocol bridges, and control logic, or combine programmable logic with soft processor cores for system-on-programmable-logic designs. PCB implementation requires careful power delivery and escape routing because the FBGA package exposes fine-pitch balls beneath the device. Follow the manufacturer’s pinout and package-design guidance for ball assignment, power and ground distribution, decoupling, and signal escape. Confirm that the selected speed grade and temperature grade match the operating environment before releasing the production design. This page combines device specifications, package details, sourcing guidance, equivalent-device information, and practical implementation considerations to support faster FPGA selection and board bring-up.

RFQ Contact
XC3S1000-4FG676C - 1M Gate Spartan-3 FPGA | Xilinx
XC3S1000-4FG676C

XC3S1000-4FG676C - 1M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-4FG676C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic elements, 391 user I/Os, and a 1.2 V operating supply in a 676-ball BGA package. The -4 suffix identifies its performance grade, while the commercial temperature designation supports designs operating from 0°C to 85°C. A field-programmable gate array is a semiconductor whose digital logic, interconnections, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks with programmable routing resources. It replaces many fixed-function gate arrays when design changes, field upgrades, or moderate logic density are required. The XC3S1000 provides 391 user I/Os in a 676-ball package, giving it substantially more interface capacity than smaller Spartan-3 devices. Its 17,280 logic elements provide a practical implementation target for control logic, interface bridging, data acquisition, embedded protocol handling, and general-purpose parallel processing. The 676-ball package also supports a high pin count for designs that need multiple external buses and mixed-speed peripherals. The XC3S1000 belongs to the Spartan-3 generation, whose architecture combines configurable logic blocks, distributed and block RAM, dedicated digital signal processing resources, programmable I/O blocks, and programmable interconnect. The manufacturer documentation identifies the family as the DS099 Spartan-3 FPGA data sheet. The -4 performance grade should be checked against the timing constraints of the selected clock, I/O standard, and logic path. Typical uses include industrial automation, test equipment, communications interfaces, embedded control, video timing, and general digital signal processing. Its 391 I/Os are useful for parallel sensor acquisition, while the logic resources can implement protocol state machines, data pipelines, and control functions. The commercial temperature range makes it appropriate for indoor commercial and industrial equipment when the enclosure temperature remains within 0°C to 85°C. PCB implementation requires careful attention to the 676-ball land pattern, power distribution, decoupling, and high-speed routing. Place power and ground planes according to the manufacturer's pinout and layout guidance, and route clocks, memories, and other high-speed interfaces with controlled impedance and short return paths. Confirm the assembled board against the exact package drawings before releasing fabrication data. This product page organizes the key Spartan-3 device facts, commercially relevant ordering information, pin-compatible replacement options, comparison data, and practical PCB considerations. It is intended to accelerate initial component selection while preserving the need to validate timing, power integrity, thermal performance, and lifecycle requirements for the finished system.

RFQ Contact
XC3S1000-4FG676I - 1M Gate Spartan-3 FPGA | AMD/Xilinx
XC3S1000-4FG676I

XC3S1000-4FG676I - 1M Gate Spartan-3 FPGA | AMD/Xilinx

AMD/Xilinx XC3S1000-4FG676I is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 442,368 logic cells, 17,280 slices, and 391 user I/O, packaged in a 676-ball fine-pitch ball grid array. The device operates from a 1.14 V minimum supply, uses 1.2 V core technology, and is built on a 90 nm process. An FPGA is a programmable-logic semiconductor whose configurable logic blocks, programmable input/output blocks, embedded resources, and routing fabric can be configured after manufacture. Within the semiconductor hierarchy, the XC3S1000 belongs to the FPGA and CPLD family, specifically the Spartan-3 low-cost logic-device series. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement multiple digital functions in one device and can be reprogrammed for design revisions, prototypes, and product variations. The principal device characteristics are 630 MHz advertised operating speed, 442,368 logic cells organized into 17,280 slices, 1,000,000 system gates, and 391 user I/O. Its 676-ball FBGA package provides a large, fine-pitch connection interface suitable for systems requiring substantial external connectivity. The -4 speed designation identifies one of the device's supported performance grades, while the I suffix identifies the industrial ordering variant. Spartan-3 devices combine configurable logic with dedicated arithmetic, block RAM, and digital signal processing resources. These resources allow parallel datapaths, embedded memories, state machines, communication interfaces, and control logic to be consolidated into a single programmable component. The architecture is useful when a design must evolve faster than an application-specific ASIC mask set or when field updates are required after deployment. Typical uses include industrial control, communications equipment, instrumentation, embedded test systems, video processing, and general-purpose digital prototyping. The 391 I/O count can support external memory, data converters, network transceivers, clocks, and displays, although a complete design must account for bank-specific supply requirements, dedicated configuration pins, and I/O-standard constraints. PCB implementation requires a fine-pitch 676-ball BGA footprint, careful power and ground distribution, and controlled-impedance routing. Configuration storage, decoupling, clocking, and JTAG access must also be planned according to the Spartan-3 configuration and power-architecture guidance. The large BGA also complicates prototype assembly and inspection. This page organizes the verified electrical, logical, packaging, and sourcing characteristics of the XC3S1000-4FG676I, compares same-footprint Spartan-3 speed and temperature-grade variants, and provides practical guidance for migration, power planning, BGA layout, configuration, and system integration.

RFQ Contact
XC3S1000-4FT256C - 1M Gate Spartan-3 FPGA | Xilinx
XC3S1000-4FT256C

XC3S1000-4FT256C - 1M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-4FT256C is a 1 million system-gate Spartan-3 field-programmable gate array with 17,280 logic cells, 173 I/O pins, and a 630 MHz device rating. It operates from a 1.2 V core supply and is packaged in a 256-ball FT256 ball-grid-array package. The device is manufactured using 90 nm CMOS technology. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interfaces, and signal-processing functions are configured after manufacture. In the product hierarchy, an FPGA belongs to programmable logic, which includes application-specific integrated circuits, complex programmable logic devices, and field-programmable gate arrays. The Spartan-3 architecture combines configurable logic blocks, programmable I/O, block RAM, dedicated multipliers, and clock-management resources to implement control logic, communication interfaces, and embedded signal processing. The XC3S1000-4FT256C provides 17,280 logic cells for designs requiring moderate-to-high logic density. Its 173 I/O positions support connections to external memory, data converters, display interfaces, communications transceivers, and control peripherals. A 630 MHz rating provides a useful basis for timing-constrained clock-domain designs, while the 1.2 V core supply helps reduce switching-related power in systems that require substantial programmable logic. The device uses a 90 nm CMOS process and belongs to the Spartan-3 product family. The FT256 designation identifies the 256-ball package configuration, while the -4 suffix identifies the performance grade. The C suffix denotes the commercial temperature grade. Applications must also account for the package's 1.0 mm ball pitch when defining the PCB land pattern, solder-mask design, assembly process, and inspection requirements. Typical uses include industrial control, communications equipment, embedded instrumentation, video and display processing, data acquisition, and general-purpose digital logic. The FPGA is particularly useful when a design benefits from parallel interfaces, configurable I/O standards, hardware multipliers, block RAM, or logic that can be updated after manufacture. Legacy systems can use the device as a bridge between slower legacy interfaces and higher-speed digital processing logic. PCB implementation should follow the manufacturer package and pinout documentation exactly. Decoupling, configuration-interface access, clock routing, voltage sequencing, and unused balls require careful planning before layout. Because the device is a large BGA, assembly also depends on appropriate PCB stack-up, via-in-pad strategy, solder-mask clearance, and thermal design. This product record combines the manufacturer datasheet information with package-specific engineering guidance, drop-in replacement analysis, comparison parameters, and practical design considerations. It is intended to help engineers evaluate FPGA resource allocation, board compatibility, legacy-product maintenance, and migration planning without relying solely on a distributor parameter table.

RFQ Contact