Products (44,000+)

M29W640GB70N3F - 64Mb 70ns Parallel NOR Flash | Micron
M29W640GB70N3F

M29W640GB70N3F - 64Mb 70ns Parallel NOR Flash | Micron

The Micron Technology M29W640GB70N3F is a 64Mb (8 MB) 3V parallel NOR flash memory with x8/x16 data-bus width, 70 ns access time, and an operating voltage range of 2.7V to 3.6V, housed in a 48-lead TSOP I package and qualified to AEC-Q100 for automotive environments with a -40C to +125C operating temperature range. Parallel NOR flash is a nonvolatile memory technology in which every address is directly accessible over a parallel address/data bus, giving deterministic read latency. In the memory hierarchy it sits alongside NAND flash and serial (SPI) flash as a code-storage device; NOR's execute-in-place (XIP) capability and superior random-read speed make it the traditional choice for boot code, firmware, and parameter storage in microcontroller-based systems, whereas NAND targets high-density data storage. Key features of the M29W640GB include the 70 ns access time for fast code fetch, a flexible x8/x16 organization that lets one footprint serve 8-bit or 16-bit buses, 2.7V-3.6V single-supply operation for 3V embedded systems, and automotive AEC-Q100 qualification over the full -40C to +125C temperature span. Block-erase and word/byte program operations are managed via standard command-set interfaces with status polling, easing firmware reuse across the M29W family. Technically, the device uses Micron's floating-gate NOR cell array organized into erase blocks, supporting uniform block architecture (GB variant) suited to in-field firmware update schemes. The parallel interface supports asynchronous reads with CE#, OE#, and WE# control, and the 48-TSOP I surface-mount package keeps the footprint compact for embedded boards. Typical applications include automotive ECU boot flash, industrial programmable logic controller (PLC) firmware storage, telecom and networking equipment code banks, and set-top-box or consumer-appliance firmware memory. When designing with this device, note that the part status is listed as obsolete, so new designs should plan lifetime buy or second-source strategies; verify block-protection and command-set compatibility when substituting family members. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-09-05.

RFQ Contact
M29W800FT70N3F - 8Mb 70ns Parallel NOR Flash | Micron
M29W800FT70N3F

M29W800FT70N3F - 8Mb 70ns Parallel NOR Flash | Micron

The Micron M29W800FT70N3F is an 8 Mbit (1 Mbit x8 / 512 Kbit x16) 3V parallel NOR Flash memory with a 70 ns access time, supplied in a 48-pin TSOP I package with Tape & Reel delivery. It operates from a 2.7 V to 3.6 V supply across an automotive-grade -40C to +125C temperature range, making it one of the last-generation high-reliability code-storage devices still widely designed into legacy platforms. Parallel NOR Flash is a nonvolatile memory category that stores code and data in NOR cells addressable byte-by-byte or word-by-word over a parallel address/data bus. In the memory hierarchy it sits alongside masked ROM and serial Flash as primary boot memory: CPUs and microcontrollers execute-in-place (XIP) directly from its array, which is why NOR remains preferred for firmware storage even as NAND dominates bulk data storage. Key features of the M29W800FT family include the 70 ns random-access time that supports zero-wait-state execution from slow bus clocking, the flexible x8/x16 bus-width organization selected via the BYTE# pin, and block-protected architecture with temporary unprotect for field firmware updates. The asymmetric T (top boot) block map places the boot blocks with CFI (Common Flash Interface) support for software query of erase/program commands and status. Technically, the device uses a 3 V single-supply EEPROM-array NOR core with automatic program and erase algorithms managed on-chip, eliminating external erase-verify loops. Erase suspend/resume allows reading from one block while erasing another, and the reset/power-down pin (RP#) reduces standby current and provides hardware reset during brown-out events. Typical applications include automotive ECU boot code storage, industrial drives and motor-control firmware, networking equipment configuration storage, and set-top-box or telecom line-card firmware where a parallel bus XIP memory is mandated by the legacy design. A key design consideration is lifecycle: this part is marked obsolete, so new designs should plan a drop-in alternative or last-time-buy stock, and legacy designs must qualify substitutes before re-spins. This page synthesizes verified distributor data, cross-reference results, and drop-in alternative analysis not found on any single distributor page, with pricing as of 2026-09-05.

RFQ Contact
M29W800FT70ZA3SF - 8Mbit NOR Flash 70ns TFBGA48 | Micron
M29W800FT70ZA3SF

M29W800FT70ZA3SF - 8Mbit NOR Flash 70ns TFBGA48 | Micron

The Micron M29W800FT70ZA3SF is an 8 Mbit (8 megabit) parallel NOR Flash memory IC with a 70 ns access time, operating from a 2.7 V to 3.6 V supply in a 48-ball TFBGA (6 x 8 mm) package. It is the top-boot-block member of the Micron (formerly STMicroelectronics) M29W800FT family of 3 V parallel NOR Flash devices, rated for operation from -40 C to +125 C. Parallel NOR Flash is a non-volatile memory technology that connects directly to a microprocessor's address and data buses, allowing code to be executed in place (XIP, execute-in-place). Within the memory hierarchy, NOR Flash sits alongside SRAM and DRAM as directly addressable memory, distinguished from NAND Flash and serial SPI Flash by its random-access capability and high read reliability. It remains the standard choice for boot code storage in embedded systems. Key features of this device include the 70 ns access time suitable for zero-wait-state execution on many embedded processors, a 2.7 V to 3.6 V single supply compatible with 3.3 V logic, and 8 Mbit of density organized for byte or word access. The uniform block architecture with boot-block arrangement supports flexible code and data partitioning. Architecturally, the M29W800FT family uses floating-gate NOR cell technology with block-based erase and program operations managed through a command interface. Status polling and toggle-bit schemes allow the host processor to monitor program and erase completion without interrupts. The extended -40 C to +125 C temperature rating targets harsh industrial and automotive-adjacent environments. Typical applications include boot-code storage for embedded microcontrollers and microprocessors, industrial automation controllers, networking equipment firmware, set-top boxes, and telecom line cards where in-place code execution is required. Designers should ensure the 3.3 V supply rail is decoupled locally and observe the block-erase and program timing requirements of the command interface when writing drivers. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-09-02.

RFQ Contact
M2GL005-1FG484 - 6K LEs, 209 I/O FPGA | Microchip
M2GL005-1FG484

M2GL005-1FG484 - 6K LEs, 209 I/O FPGA | Microchip

The Microchip Technology M2GL005-1FG484 is an IGLOO2 flash field-programmable gate array with 6,060 logic elements, 209 user I/O, and a 484-ball plastic BGA package. It operates from a 1.2 V core supply and is designed for compact programmable-logic designs requiring substantial I/O density. The M2GL005-1FG484 combines nonvolatile FPGA configuration, reusable logic fabric, and integrated programmable I/O in a surface-mount package suitable for industrial control, communications, bridging, and embedded system-management equipment. An FPGA is a programmable semiconductor in which the logic interconnect and digital functions can be configured after fabrication. The M2GL005 belongs to the IGLOO2 family, which combines low-density flash FPGA resources with general-purpose logic functions. Within the product hierarchy, it is an FPGA, then a programmable-logic IC, then a semiconductor. This positioning makes the device useful when fixed-function logic would require excessive board space or frequent redesign. The IGLOO2 architecture provides 6,060 logic elements and 209 I/O, giving the design substantially more external connectivity than a small programmable logic device. Its flash configuration technology allows the programmed function to be retained without a separate configuration PROM. A 484-BGA package also supports dense routing and fine-pitch PCB layouts, although it requires careful escape-routing and assembly planning. M2GL005 devices are intended for functions such as protocol bridging, I/O expansion, signal conversion, system management, and secure connectivity. The 209-I/O count can consolidate parallel digital interfaces, control interfaces, and communications logic into one device. Because the target package contains 484 balls, its electrical performance depends on correct bank voltage planning, clean power distribution, and controlled rise time across all supply rails. The 1.2 V core requirement makes board-level sequencing important in systems that also operate external interfaces at higher voltages. Designers should use the manufacturer pin-description tables when assigning every ball, especially configuration pins, dedicated pins, banks, and supply pins. The IGLOO 2 packaging and pin-description guide referenced by Microchip is the appropriate document for PCB land patterns and bank assignments. For new layouts, follow the package-specific ball map rather than relying on a generic BGA symbol. Place decoupling capacitors at every supply ball where the recommended layout permits, route high-speed nets with short return paths, and preserve the 1.0 mm terminal pitch shown for this package family. Programming, configuration density, clocking, and I/O standards must be checked against the exact device variant before schematic release. This page combines the manufacturer product information, package and pin documentation, sourced replacement options, and application-specific design guidance. It also distinguishes the IGLOO2 M2GL005 options by package suffix and qualification coding, helping engineers identify a board-compatible replacement without overlooking device-temperature, speed-grade, or qualification requirements.

RFQ Contact
M2GL005-1FG484I - 6K LLE 484-BGA FPGA | Microchip
M2GL005-1FG484I

M2GL005-1FG484I - 6K LLE 484-BGA FPGA | Microchip

The Microchip Technology M2GL005-1FG484I is an IGLOO2 low-density field-programmable gate array with 6,060 logic elements, 209 user I/O, and a 484-ball BGA package. It is designed for compact embedded systems that require programmable logic, flexible I/O, bridging, data conversion, system management, and secure connectivity functions. The device combines nonvolatile configuration storage with a low-power FPGA architecture for designs requiring rapid configuration and field-updatable logic. An FPGA is a programmable semiconductor whose logic fabric and I/O can be configured after manufacture. In the product hierarchy, the M2GL005-1FG484I is an IGLOO2 device within the broader field-programmable gate array category, falling under programmable-logic semiconductors. This low-density position makes it useful when a microcontroller is insufficient for parallel interface handling or protocol bridging but a larger FPGA would add unnecessary cost, power, and board area. Key device characteristics include 6,060 logic elements, 209 user I/O, and a 1.2 V core supply. The 484-BGA package provides dense board connectivity while supporting logic-intensive embedded functions in compact assemblies. The M2GL005 family is positioned for communications, industrial, and embedded applications where low-power flash-based FPGA functionality, I/O flexibility, and product security are important design priorities. The IGLOO2 architecture integrates programmable logic blocks with embedded memory, dedicated serial communications resources, and user I/O that can be assigned according to the system design. Its nonvolatile configuration technology eliminates the need for an external configuration PROM in standard single-device applications. This simplifies board design, reduces component count, and allows the programmed configuration to be retained when power is removed. Typical applications include industrial protocol conversion, data acquisition, I/O expansion, embedded control, secure connectivity, bridging functions, and image or video processing support. Its 209 I/O are useful for parallel buses, sensor interfaces, communication links, and control signals, while the 6,060-logic-element fabric handles concurrent state machines, data formatting, arbitration, and protocol engines without requiring discrete logic. PCB implementation must account for the fine-pitch 484-BGA geometry, high-speed power distribution, and device-specific I/O constraints. Follow the Microchip IGLOO 2 FPGA Packaging and Pin Descriptions User Guide when assigning banks and allocating pins. Place bypass and decoupling capacitors close to the relevant supply pins, route high-speed signals with controlled impedance, and verify the complete design against the manufacturer’s package, programming, and power-sequencing guidance. This page combines package, application, comparison, and replacement guidance with practical FPGA design considerations. It is intended to help engineers identify suitable IGLOO 2 variants, understand the limitations of the 6,060-logic-element device, and plan PCB, programming, and signal-integrity implementation without relying solely on a distributor product listing.

RFQ Contact
M2GL005-1FGG484 - 6060-Cell IGLOO 2 FPGA | Microchip
M2GL005-1FGG484

M2GL005-1FGG484 - 6060-Cell IGLOO 2 FPGA | Microchip

The Microchip Technology M2GL005-1FGG484 is an IGLOO 2 low-density field-programmable gate array with 6,060 logic cells, 719,872 RAM bits, and 209 user I/O in a 484-ball FBGA package. The device operates from a 1.2 V core supply and combines programmable logic, embedded RAM, and flash-based configuration in one programmable-logic device. An FPGA is a semiconductor whose digital logic function is configured after manufacture. The M2GL005 belongs to the IGLOO 2 hierarchy: field-programmable gate array, programmable-logic device, and digital semiconductor. This low-density device is intended for general-purpose functions such as bridging, I/O expansion, data conversion, system management, secure connectivity, and embedded control without the resources of a larger FPGA. Principal device features include 6,060 logic cells, 719,872 RAM bits, 209 user I/O, and a 484-ball FBGA package with 1.0 mm ball pitch. Its flash-based architecture allows the configuration to be retained in nonvolatile memory, while the low-density logic capacity provides a compact implementation for control-plane, interface-conversion, and peripheral-management functions. The manufacturer lists the M2GL005 family as in production. The 484-ball package exposes substantially more device connections than a typical small-outline FPGA, supporting wide parallel interfaces and multiple I/O standards when the appropriate banks are configured. System designers must assign the 1.2 V core supply, configuration interface, clocking, user I/O, and configuration pins according to the IGLOO 2 pin-description guide. Because the package contains 484 balls, power delivery, decoupling, and escape routing require careful PCB planning. Typical uses include industrial communications interfaces, medical and test equipment, secure connectivity, video and image processing, and system-management blocks. The 209 user I/O are useful for parallel data capture, control, legacy peripheral emulation, and bridging. The device can also implement protocol converters and real-time control functions alongside external processors when its logic and RAM resources are sufficient. PCB design should provide a continuous low-impedance supply plane, place core and I/O decoupling capacitors close to their assigned balls, and route sensitive clocks and differential interfaces according to the bank constraints in the IGLOO 2 packaging documentation. Confirm the exact pin, bank, voltage, and differential-pair assignments before schematic capture; package compatibility alone does not guarantee that every I/O configuration can be transferred unchanged between devices. This product page combines the manufacturer's device status with verified package, logic, RAM, and I/O specifications, structured replacement guidance, and practical PCB considerations. It also distinguishes verified drop-in candidates from variants whose speed, temperature, or package-code differences require engineering review.

RFQ Contact
M2GL005-1TQ144 - 6060-LE 1.2V IGLOO2 FPGA | Microchip
M2GL005-1TQ144

M2GL005-1TQ144 - 6060-LE 1.2V IGLOO2 FPGA | Microchip

The Microchip Technology M2GL005-1TQ144 is an IGLOO2 low-density field-programmable gate array with 6,060 logic elements, 719,872 bits of RAM, and 84 user I/O pins. The device operates from a 1.2 V core supply and is packaged in a 144-pin TQFP measuring 20 mm by 20 mm, making it suitable for compact programmable-logic designs requiring substantial routing resources and mixed I/O capacity. An FPGA is a reconfigurable digital semiconductor that can be programmed after fabrication to implement logic, state machines, interface controllers, and signal-processing functions. The IGLOO2 family belongs to the broader low-density programmable-logic hierarchy and combines FPGA fabric, programmable I/O, embedded RAM, and configuration resources in one device. This makes the M2GL005-1TQ144 useful where a microcontroller or discrete logic would require extensive firmware and supporting circuitry. Key device attributes include 6,060 logic cells, 719,872 total RAM bits, and 84 I/O pins in a 144-TQFP package. The 1.2 V operating voltage supports modern low-energy digital systems, while the large pin count provides broad connectivity to external memory, sensors, communications devices, and mixed-signal components. Microchip lists the M2GL005 family as in production, supporting its use as the foundation of general-purpose programmable-logic platforms. The IGLOO2 architecture supports parallel programmable logic and reusable on-chip RAM, allowing designers to implement datapath logic, protocol adapters, control logic, and fixed-function subsystems without relying on an external processor. The 84 available I/O pins make the 144-TQFP option particularly useful where multiple buses or mixed signal interfaces must connect directly to the FPGA. Its 20 mm by 20 mm surface-mount package also avoids the mechanical complexity of larger ball-grid-array FPGA packages. Typical uses include industrial control and factory automation, communications infrastructure, embedded system management, I/O expansion, and secure connectivity. The device can bridge dissimilar interfaces, translate protocols, consolidate control functions, or implement parallel data acquisition logic. Its large I/O count is especially useful for systems requiring multiple chip-select, address, control, and serial signals without adding another external bus controller. PCB design should follow Microchip's package and power-supply recommendations, including short, properly decoupled core and I/O supply connections and careful assignment of sensitive pins. Because the complete numbered pin map is not published in the accessible product results, use the manufacturer package drawing and pin-description table before assigning tracks, power rails, or programming signals. This page combines the exact M2GL005-1TQ144 device specifications, lifecycle information, same-package alternatives, comparison criteria, and practical selection guidance to support FPGA sourcing and design decisions.

RFQ Contact
M2GL005-1TQG144 - 6K IGLOO2 FPGA | Microchip Technology
M2GL005-1TQG144

M2GL005-1TQG144 - 6K IGLOO2 FPGA | Microchip Technology

The Microchip Technology M2GL005-1TQG144 is an IGLOO2 low-density field-programmable gate array with 6,060 logic cells, 719,872 RAM bits, and 84 I/O pins in a 144-pin TQFP package. It operates from a 1.2 V core supply and is intended for compact embedded systems requiring configurable logic, serial interfaces, control functions, and modest parallel processing. The package is a surface-mount 20 x 20 mm TQFP, allowing the device to be used where BGAs would increase assembly complexity. An FPGA is a programmable semiconductor whose logic fabric and interconnect can be configured after manufacture. Within the product hierarchy, the M2GL005-1TQG144 belongs to the IGLOO2 family of low-density FPGAs, combining programmable logic blocks, embedded SRAM, programmable I/O, and clock-management resources in one device. This makes it suitable for consolidating control logic that would otherwise require multiple CPLDs, discrete logic ICs, and application-specific controllers. The device provides 6,060 logic cells and 719,872 RAM bits, providing meaningful capacity for protocol bridging, parallel-to-serial conversion, data acquisition front ends, and embedded control. Its 84 I/O pins give the design substantial connectivity for buses, status signals, clocks, and external interfaces. The 1.2 V operating voltage suits modern low-energy embedded systems, while the 144-pin TQFP package supports conventional surface-mount assembly and inspection. The IGLOO2 architecture combines programmable fabric with dedicated resources for embedded memory, clocking, and I/O. Engineers can implement multiple control paths, interface engines, or data-processing blocks in one FPGA, reducing component count and interconnections on a compact board. Because the M2GL005 is a low-density member, it also avoids the larger pin counts, higher board complexity, and greater routing demands associated with high-density programmable logic. Typical applications include industrial automation, sensor acquisition, motor and motion control, communications gateways, medical monitoring equipment, and compact embedded control platforms. The 84 available I/O pins are particularly useful for parallel sensors and legacy peripherals, while the embedded RAM can buffer data or support protocol state machines. The device can also consolidate multiple fixed-function logic sections into a single programmable implementation. PCB design should preserve the manufacturer's recommended power, decoupling, and clock-routing practices. Place supply capacitors close to the appropriate device pins, route high-speed clock signals with short, controlled-impedance paths, and use the pin-description tables in the packaging guide when assigning every TQFP signal. Confirm the selected configuration’s I/O standards against the actual board voltage domains before programming the device. This page combines the verified device identity, package information, pin-resource counts, lifecycle status, application guidance, and same-package replacement analysis. It also helps engineers distinguish speed, temperature, and package-ordering variants before making a PCB-compatible substitution, while preserving the distinction between a true drop-in replacement and a merely similar FPGA.

RFQ Contact
M2GL005-1VF256 IGLOO2 FPGA, 6060 LEs, 161 I/O, 256-FBGA | Microchip
M2GL005-1VF256

M2GL005-1VF256 IGLOO2 FPGA, 6060 LEs, 161 I/O, 256-FBGA | Microchip

The Microchip Technology M2GL005-1VF256 is an IGLOO2 low-density FPGA built on a 1.2 V flash-programmable fabric, delivering 6,060 logic cells with 161 user I/O in a 256-ball FBGA (VF256) package. It targets general-purpose logic, bridging, I/O expansion, system management and secure connectivity designs where a low-power, small-footprint programmable logic device is preferred over a microcontroller or discrete glue logic. A field-programmable gate array is a reconfigurable digital integrated circuit whose logic fabric, interconnect and I/O blocks are defined after manufacture by a bitstream downloaded from flash. The IGLOO2 family from Microsemi/Microchip is a low-density, non-volatile flash FPGA line positioned between mask-programmable ASICs and larger, higher-cost FPGAs, giving designers a fast path to volume production without a foundry mask set. Key characteristics of this device include 6,060 logic cells, 161 user I/O, a 1.2 V core operating voltage, and on-chip non-volatile configuration memory so the design is retained without an external configuration PROM. Because the configuration is stored in flash, the part powers up directly into the user's logic with no wait-state configuration sequence from an external master, which simplifies board design and reduces BOM cost. The IGLOO2 architecture provides a mix of programmable logic and dedicated I/O resources, allowing parallel interface bridging, bus conversion, protocol translation and simple control-plane logic to be consolidated into a single device. The 256-ball FBGA package with 0.8 mm ball pitch keeps the footprint small enough for space-constrained industrial, communications and consumer-adjacent equipment, while offering more I/O than a quad flat pack would provide. Typical applications include I/O expansion and level translation between legacy and modern systems, industrial sensor and instrument signal conditioning, secure connectivity and authentication front ends, communications infrastructure bridging, and general system-management supervision logic in industrial and commercial equipment. When designing around this device, keep the 1.2 V core rail well filtered and decoupled, and place the 0.8 mm pitch BGA on a board whose escape-routing rules are checked against the IGLOO 2 packaging and pin description user guide before layout sign-off. This page brings together the manufacturer device page, distributor availability data, package and pin references, drop-in alternatives in the same 256-ball footprint, and practical design notes that are not consolidated in a single manufacturer document.

RFQ Contact
M2GL005-1VF256I - 6K LEs, 161 I/O IGLOO2 FPGA | Microchip
M2GL005-1VF256I

M2GL005-1VF256I - 6K LEs, 161 I/O IGLOO2 FPGA | Microchip

The Microchip Technology M2GL005-1VF256I is a low-density IGLOO2 flash FPGA with 6,060 logic elements, 161 user I/O, and a 256-ball FBGA package. The -1 speed grade supports designs requiring a compact, nonvolatile programmable-logic solution, while the industrial-temperature suffix targets extended-temperature equipment. The device combines programmable logic, embedded RAM resources, and configurable user I/O within a single package. An FPGA is a programmable semiconductor whose digital logic, I/O, and memory resources can be configured after manufacture. Within the device hierarchy, the M2GL005 belongs to IGLOO2, a low-density FPGA family positioned below larger IGLOO2 devices. The IGLOO2 family is intended for compact control, bridging, interface conversion, secure connectivity, and system-management functions where a programmable logic solution is more flexible than a fixed application-specific integrated circuit. The M2GL005-1VF256I provides 6,060 logic elements and 161 user I/O in the 256-VF package. Configuration data is stored in on-chip flash, allowing the FPGA to retain its programmed logic without a separate external configuration PROM. Its low-density architecture is useful for protocol bridges, I/O expansion, data acquisition front ends, industrial control modules, and compact embedded systems where board area and power consumption are important. The IGLOO2 architecture supports a mix of programmable logic and memory resources for parallel processing, state machines, data formatting, and interface control. Because the device includes on-chip flash configuration memory, a prototype or production board can use the same nonvolatile configuration approach across power cycles. Designers must still observe the voltage, timing, decoupling, thermal, and package-connection requirements in the IGLOO2 data sheet. Typical applications include industrial sensor aggregation, communications protocol conversion, secure boot and key-management support, embedded instrumentation, low-power monitoring systems, and control logic for industrial or communications equipment. The 161 available I/O are particularly useful for parallel sensors, display interfaces, capture logic, and board-level signaling when package density is more important than very high logic capacity. For PCB implementation, follow the Microchip IGLOO2 Packaging and Pin Descriptions User Guide for the complete 256-ball connection list and differential-pair assignments. Place all required power and decoupling capacitors close to their specified balls, route configuration interfaces away from sensitive analog or high-speed nets, and validate every unused ball according to the device documentation before releasing the layout.

RFQ Contact
M2GL005-1VF400 - 6K LEs, 169 I/O IGLOO2 FPGA | Microchip
M2GL005-1VF400

M2GL005-1VF400 - 6K LEs, 169 I/O IGLOO2 FPGA | Microchip

The Microchip Technology M2GL005-1VF400 is an IGLOO2 low-density field-programmable gate array with 6K logic elements, 169 I/O, and a 400-LFBGA package. It is a programmable semiconductor used to implement bridging, I/O expansion, data conversion, system management, and secure connectivity functions. The -1 suffix identifies the device speed grade, while VF400 denotes its 400-ball package configuration. An FPGA is a reconfigurable digital integrated circuit whose logic, interconnect, and I/O functions can be programmed after manufacture. Within the semiconductor hierarchy, the M2GL005-1VF400 belongs to the FPGA and CPLD class, using configurable logic blocks, programmable routing resources, memory, and I/O blocks. Compared with fixed-function logic ICs, this architecture allows design changes, field updates, and implementation of multiple control functions in one device. The device provides approximately 6K logic elements and 169 I/O, making it suitable for low-density bridging, protocol conversion, peripheral interconnection, and embedded control tasks. Its 400-LFBGA package supports a high connection count for designs requiring substantial external signal access. The manufacturer identifies the M2GL005 family as being in production and recommends it for communications, industrial, and general-purpose programmable-logic applications. The IGLOO2 architecture integrates programmable logic with embedded memory and configurable I/O. Engineers can map counters, state machines, datapaths, communication interfaces, and control functions into a compact device while retaining the flexibility to revise logic through reprogramming. Exact core voltage, memory capacity, supported I/O standards, and operating-temperature limits must be confirmed in the manufacturer datasheet before final schematic and timing closure. Typical applications include industrial protocol bridges, embedded serial-interface adapters, I/O expansion, platform management logic, and secure-connectivity controllers. It is also appropriate for compact control modules that need parallel logic alongside programmable serial communication. Designs requiring higher logic density or numerous high-speed interfaces should be compared with larger IGLOO2 devices before committing the PCB footprint. The principal hardware considerations are BGA escape routing, clean power and ground distribution, decoupling, and signal-integrity validation. Because the package exposes 400 balls, use the manufacturer's pin-information guide and package drawings for power, ground, configuration pins, and I/O placement. Preserve the prescribed configuration interface and program the device through a supported toolchain or embedded programming solution. This page combines package, device-family, application, and replacement context with practical guidance for schematic capture, layout, programming, and migration decisions. It helps engineers distinguish electrically similar M2GL005 variants by package, grade, temperature designation, and qualification rather than treating every similarly named orderable part as a drop-in substitute.

RFQ Contact
M2GL005-1VF400I - 6060-Cell 1.2V IGLOO2 FPGA | Microchip
M2GL005-1VF400I

M2GL005-1VF400I - 6060-Cell 1.2V IGLOO2 FPGA | Microchip

The Microchip Technology M2GL005-1VF400I is an IGLOO2 low-density field-programmable gate array with 6,060 logic cells, 1.2 V core voltage, and a 400-pin VFBGA package measuring 17 mm by 17 mm. The device provides 719,872 bits of embedded flash memory and is specified for industrial temperatures from -40 °C to +100 °C. An FPGA is a semiconductor device whose digital logic, interconnections, and many interface functions are configured after manufacture. The M2GL005 device belongs to the IGLOO2 family, where the hierarchy is FPGA, programmable logic device, integrated circuit, and semiconductor. Its combination of reprogrammable logic, embedded flash, and a relatively small 400-ball package supports compact embedded systems requiring flexible hardware behavior or low-volume product customization. Key device features include 6,060 logic cells, 169 available I/O, a 1.2 V operating core, and 719,872 bits of configuration memory. The M2GL005-1VF400I is identified as an industrial-temperature, -1 speed-grade option. It is supplied in a tray according to the listed product information. These attributes make the device applicable to industrial control, communications, bridge, input/output expansion, system management, and secure-connectivity designs. The IGLOO2 architecture integrates programmable logic with on-chip flash and embedded SRAM, allowing a design to retain configuration after power is removed. The manufacturer describes the family as a low-density FPGA platform for general-purpose functions such as protocol bridging, I/O expansion, conversion, system management, and secure connectivity. The 400-pin package provides a high pin count for designs requiring numerous external signals, although engineers must use the package pin-description document when assigning ball locations and power rails. Typical applications include industrial interface controllers, programmable communication links, data acquisition modules, embedded gateways, sensor aggregation systems, and compact control platforms. Its 1.2 V core and low-density resource structure are appropriate for control logic, status monitoring, protocol conversion, and modest parallel processing rather than processor-scale workloads. The industrial temperature rating supports operation across -40 °C to +100 °C when the complete board, power system, and enclosure meet their own environmental requirements. The main design consideration is package and power planning. A 400-ball VFBGA requires a dense, multilayer PCB with short escape routes, careful via placement, and controlled return paths. Decoupling must be distributed across the device, and signal-integrity checks should include package-ball transitions and board-level clock integrity. The M2GL005-1VF400I is not a universal replacement for parts in smaller packages because the physical footprint and pin assignment must match exactly. This page combines the manufacturer device information, verified distributor attributes, package details, comparison points, and practical implementation guidance to support device selection, PCB planning, and replacement review. It also distinguishes true same-footprint alternatives from unrelated FPGA families and records missing technical attributes without substituting assumptions for manufacturer data.

RFQ Contact
M2GL005-1VFG256 - 6K LEs IGLOO2 FPGA | Microchip | 256-BGA
M2GL005-1VFG256

M2GL005-1VFG256 - 6K LEs IGLOO2 FPGA | Microchip | 256-BGA

The Microchip Technology M2GL005-1VFG256 is a low-density IGLOO2 flash FPGA with 6,060 logic elements, 161 I/O, and 719,872 bits of configuration memory in a 256-ball FBGA package. The device is based on the M2GL005 IGLOO2 family and provides programmable logic for general-purpose functions such as bridging, I/O expansion, data conversion, system management, and secure connectivity. Its 256-ball package is intended for compact, high-density PCB layouts where a large programmable resource set is required in a small area. A flash FPGA is a semiconductor device whose configuration memory stores the implemented circuit after programming. Because the configuration is retained in flash, the M2GL005-1VFG256 does not require an external configuration PROM for normal operation. It belongs to the broader hierarchy of programmable logic devices, which includes FPGAs, CPLDs, PAL devices, and other configurable semiconductor products. The IGLOO2 family is Microchip's low-density flash FPGA family, combining programmable logic with embedded programmable resources for interface, control, and signal-processing designs. The M2GL005 device provides 6,060 logic elements and 161 I/O according to the manufacturer product information. The 719,872-bit embedded memory figure identifies the device's configuration-memory density, while the -1 suffix identifies the specific ordering variant. The VFG256 package designation identifies the 256-ball package used by this part. The exact pin assignments, bank voltages, I/O standards, and package dimensions should be taken from the IGLOO2 packaging and pin-description user guide when assigning PCB land patterns and power rails. The IGLOO2 architecture is suited to designs requiring flexible logic, parallel and serial interfaces, control logic, and modest system-management functions. Its flash configuration supports standalone programmable-logic systems, while its I/O count enables communication interfaces, data acquisition front ends, and general-purpose control platforms. The device family is also used in communications, industrial, medical, and embedded applications, where logic density and package size are balanced against power, cost, and design complexity. Typical uses include protocol bridging, I/O expansion, interface conversion, system supervision, secure connectivity, and embedded control. A designer can use the 161 available I/O to connect external memories, sensors, transceivers, displays, and industrial peripherals. The 256-ball package also supports dense fanout and fine-pitch routing, so careful PCB layout, decoupling, and via planning are essential. Review the pin-description user guide and the manufacturer datasheet before assigning supply voltages or confirming that a particular I/O standard is available on a specific ball. When selecting this device, confirm the required logic capacity, I/O count, package, speed grade, temperature grade, and memory configuration before releasing the PCB design. The IGLOO2 packaging guide and the M2GL005 datasheet provide the authoritative electrical, mechanical, and pin-assignment information. This page combines the family-level device identity, package information, programming context, replacement guidance, and design considerations needed for initial component selection.

RFQ Contact
M2GL005-1VFG400 - 6060-LUT IGLOO2 FPGA | Microchip Tech
M2GL005-1VFG400

M2GL005-1VFG400 - 6060-LUT IGLOO2 FPGA | Microchip Tech

The Microchip Technology M2GL005-1VFG400 is an IGLOO 2 low-density FPGA with 6060 logic elements, 719872 bits of Flash configuration memory, and 169 user I/O in a 400-pin VFBGA package. It operates from a 1.2 V core supply and is designed for compact, low-power programmable-logic designs requiring a large I/O count and nonvolatile configuration storage. An FPGA is a semiconductor whose digital logic, routing, and I/O resources are configured after manufacture. The IGLOO 2 family belongs to the FPGA and CPLD hierarchy within programmable-logic semiconductors. Rather than implementing a fixed Boolean function, an FPGA can support bridging, protocol conversion, I/O expansion, system management, secure connectivity, and other parallel logic functions in one device. The M2GL005-1VFG400 provides 6060 logic elements and 719872 bits of embedded Flash configuration memory. Its 169 I/O give it substantially more external connectivity than a small CPLD, while the 400-pin VFBGA supports dense, fine-pitch routing on a multilayer PCB. The 1.2 V core supply also helps reduce switching energy in systems where logic activity and I/O loading are moderate. Microchip markets the M2GL005 family for general-purpose functions such as bridging, I/O expansion, conversion, system management, and secure connectivity. The device combines a low-density programmable-logic fabric with embedded configuration memory, avoiding an external configuration PROM for standard operation. Because the package provides many I/O in a compact area, careful ball assignment and multilayer routing become important parts of board planning. Typical uses include industrial interface bridging, protocol and data-format conversion, embedded control, peripheral emulation, and low-power I/O expansion. The 169 available I/O make the device useful when a design needs substantially more signals than a small PLD, while 6060 logic elements keep the resource requirement appropriate for modest control and datapath functions rather than high-end signal processing. The principal design constraint is package complexity. A 400-pin VFBGA requires precise component placement, solder-mask and paste design, adequate thermal management, and inspection coverage for fine-pitch assembly. The PCB should follow the manufacturer's package drawing and pin-assignment guidance, while power and ground distribution should be designed to minimize noise and voltage drop across the large pin count. This product page combines the 6060-logic-element configuration with practical guidance on package routing, qualification choices, replacement decisions, and application fit. The comparison table and engineering notes add implementation context beyond the basic ordering information, helping designers evaluate board reuse, thermal strategy, and programming requirements before committing the 400-pin footprint to production hardware.

RFQ Contact
M2GL005-FG484 - 6K LEs, 209 I/O IGLOO2 FPGA | Microchip
M2GL005-FG484

M2GL005-FG484 - 6K LEs, 209 I/O IGLOO2 FPGA | Microchip

The Microchip Technology M2GL005-FG484 is an IGLOO2 low-density flash FPGA with 6,060 logic elements, 209 user I/O, and a 484-BGA package. The device operates from a 1.2 V core supply and is supplied in a 23 mm × 23 mm, 1.0 mm-pitch surface-mount package according to the verified product listings. It targets general-purpose programmable logic, I/O expansion and conversion, system management, secure connectivity, communications, industrial, medical, defense, and aviation applications. An FPGA is a programmable semiconductor containing configurable logic, memory, and programmable I/O. Within the product hierarchy, the M2GL005-FG484 is a field-programmable gate array, a low-density FPGA, and a member of Microchip's IGLOO2 family. Its flash-based configuration allows the device to retain its programmed logic after power is removed, reducing the need for external configuration memories in standalone control or bridging systems. The verified data identifies 209 user I/O and 6,060 logic elements, providing substantial interface density for conversion, bridging, control, and system-management functions. The FG484 package supports high-pin-count board layouts while keeping the component compact at 23 mm × 23 mm. Compared with a smaller FPGA package, the principal advantage is I/O accessibility; compared with a larger FPGA, the M2GL005 provides a lower logic capacity and a simpler implementation target. Microchip positions IGLOO2 devices for bridging functions, I/O expansion and conversion, system management, secure connectivity, Gigabit Ethernet or dual PCI Express control planes, and video or image processing. These applications benefit from deterministic hardware logic, parallel interface handling, and reconfigurable hardware that can be updated without replacing the assembled board. The 1.2 V core supply makes board-level power design sensitive to ripple, sequencing, and decoupling. A 484-BGA device also demands careful escape routing, multilayer PCB construction, and thermal-aware via distribution. The M2GL005-FG484 is therefore appropriate for engineers who need a large, configurable I/O surface in a low-density, nonvolatile FPGA rather than the larger programmable resources of a high-end FPGA. This page combines verified distributor availability, manufacturer application positioning, same-package alternatives, and practical design considerations for evaluating the Microchip M2GL005-FG484 in communications, industrial, medical, defense, and aviation systems.

RFQ Contact
M2GL005-FG484I - 6K LEs, 209 I/O, 1.2V IGLOO2 | Microchip
M2GL005-FG484I

M2GL005-FG484I - 6K LEs, 209 I/O, 1.2V IGLOO2 | Microchip

Microchip Technology M2GL005-FG484I is an IGLOO2 flash field-programmable gate array with 6,060 logic cells, 209 user I/O, and a 1.2 V core in a 484-ball BGA package. It belongs to the low-density IGLOO2 family and combines programmable logic with embedded flash configuration memory for standalone FPGA designs. The device targets general-purpose logic functions including bridging, I/O expansion, protocol conversion, system management, and secure connectivity. An FPGA is a programmable-logic semiconductor whose interconnection and logic resources are configured after manufacture. In the product hierarchy, the M2GL005-FG484I is an FPGA, a programmable-logic device within the broader category of integrated circuits. Compared with a fixed-function application-specific integrated circuit, an FPGA allows design revisions, field updates, and hardware customization without changing the PCB. Its embedded flash supports nonvolatile configuration retention, which is useful where the completed design must operate without an external configuration loader. The M2GL005-FG484I provides 6,060 logic cells and 209 I/O in the industrial-temperature ordering identified by the I suffix. Its 1.2 V core supply is indicated in the component listing, while the 484-BGA package supports dense PCB routing and a large perimeter and ball-field connection arrangement. These characteristics make the device suitable for control-plane logic, interface bridging, signal conversion, embedded system management, and communication equipment requiring programmable logic rather than a fixed microcontroller function. The IGLOO2 family is positioned for low-density designs where logic capacity, I/O availability, nonvolatile configuration, and package density matter more than a very large programmable fabric. Compared with the larger IGLOO2 members appearing in the same family, the M2GL005 option favors compact system integration and lower logic demand. Designers must still partition available logic and I/O according to the complete Microchip pin-description guide before committing a board layout or pin assignment. Typical applications include communications infrastructure, industrial control, medical equipment, defense systems, and aviation electronics. In a bridge or protocol converter, parallel or serial interfaces can be combined in parallel logic blocks and interconnected through the FPGA fabric. In system-management designs, the same nonvolatile platform can implement monitoring, control, alarm handling, and auxiliary I/O expansion while retaining its configuration after power removal. A practical design consideration is the 484-BGA footprint: ball assignment, bank voltage compatibility, configuration pins, power rails, and decoupling must follow the manufacturer packaging guide rather than assumptions based on another IGLOO2 package. The M2GL005 family supports secure-connectivity and general-purpose programmable functions, but design security and programming workflow must be evaluated separately from the core logic capacity and I/O count. This product page consolidates the verified device identity, family positioning, package information, sourcing context, compatible same-brand ordering variants, and engineering-focused selection guidance. It also distinguishes true package-matched options from larger IGLOO2 devices that may require design changes and therefore are not treated as drop-in replacements.

RFQ Contact
M2GL005-FGG484 - 6,060-Cell 1.2V FPGA | Microchip Technology
M2GL005-FGG484

M2GL005-FGG484 - 6,060-Cell 1.2V FPGA | Microchip Technology

Microchip Technology M2GL005-FGG484 is an IGLOO 2 flash field-programmable gate array with 6,060 logic cells, a 1.2 V core supply, and a 484-ball FBGA package. The device is intended for general-purpose programmable logic, bridging, I/O expansion, protocol conversion, system management, and secure connectivity functions. Its 23 x 23 mm package uses a 1 mm ball pitch and surface-mount construction. An FPGA is a programmable-logic semiconductor whose lookup tables, registers, memory blocks, and I/O resources can be configured after manufacture. Within the product hierarchy, the M2GL005-FGG484 is an IGLOO 2 flash FPGA, placing it between a general-purpose programmable-logic device and a larger embedded system-on-chip. Flash configuration allows the device to retain its programmed logic without a separate external configuration memory. Key features of this M2GL005 device include 6,060 logic cells, 1.2 V operation, a 484-ball FBGA package, and a square 23 x 23 mm body. The large pin and ball count provides extensive connectivity for high-pin-count designs, while the low-density IGLOO 2 configuration provides a practical option for bridging, conversion, control, and auxiliary processing functions. Microchip positions the IGLOO 2 family for communications, industrial, medical, defense, and aviation applications. The FGG484 package designation identifies the 484-ball package configuration, while the M2GL005 device family provides 6,060 programmable logic cells. The supplied programming files and pin assignments must match the exact device, package, speed grade, and temperature grade selected. Before schematic capture or PCB layout, engineers should consult the IGLOO 2 Packaging and Pin Descriptions User Guide for bank assignments, dedicated pins, power requirements, and package mechanics. Typical uses include protocol bridging, industrial interface conversion, secure connectivity, control-plane logic, data acquisition, and low-power embedded preprocessing. The device can also implement parallel-to-serial conversion, I/O expansion, or system-management functions when a programmable architecture offers more flexibility than fixed-function logic. Its large BGA footprint supports designs requiring many high-speed or differential I/O resources. For a new layout, treat the BGA ball field, power grid, decoupling, configuration interface, clocking, and I/O standards as a complete design task. Follow the manufacturer’s recommended land pattern, ball assignment, and layer-stack guidance. Validate signal integrity and power integrity with the selected Vivado or Libero design flow before releasing the board for fabrication. This product record combines the exact device identity, package characteristics, documented application directions, drop-in replacement candidates, and practical implementation considerations. It is intended to help engineers evaluate mechanical compatibility, programming constraints, application fit, and sourcing requirements before committing the M2GL005-FGG484 to a PCB design.

RFQ Contact
M2GL005-TQ144 6K IGLOO2 Flash FPGA | Microchip
M2GL005-TQ144

M2GL005-TQ144 6K IGLOO2 Flash FPGA | Microchip

The Microchip Technology M2GL005-TQ144 is a low-density IGLOO2 flash field-programmable gate array with 6,060 logic elements, 1.2 V operation, and a 144-pin TQFP package. It is designed for general-purpose programmable logic, bridging, I/O expansion, signal conversion, and system-management functions. An FPGA is a programmable semiconductor whose logic fabric can be configured after manufacture. Within the product hierarchy, the M2GL005-TQ144 is an IGLOO2 device, then a low-density flash FPGA, then a programmable-logic IC and semiconductor. Its flash configuration memory allows the device to retain its programmed configuration, while its programmable I/O and logic resources support interfaces that would otherwise require multiple fixed-function components. The verified product data identifies 6,060 FPGA cells, a 1.2 V core voltage, and a 144-pin LQFP/TQFP package. The related M2GL005 comparison data also identifies 703 Kbit of fabric RAM and 128 Kbit of embedded nonvolatile memory for the M2GL005 family. Exact device-specific operating-temperature, I/O-standard, speed-grade, and electrical details should be confirmed in the Microchip IGLOO2 datasheet before release to production. Compared with an equivalent CPLD, the IGLOO2 architecture provides substantially greater logic capacity and flexible routing for multi-block control logic. It is suitable for communications, industrial, and embedded applications where parallel interfaces, protocol bridging, acquisition support, or supervisory logic must be consolidated into one programmable device. Typical implementations include dual PCI Express control-plane functions, Gigabit Ethernet bridging, serial-to-parallel data conversion, I/O expansion, and centralized system management. The 144-pin package provides a practical balance between programmable I/O availability and board-space requirements for compact embedded systems. For layout, follow the Microchip IGLOO2 pin and package documentation for bank assignments, pin constraints, and supported voltage standards. Configuration, programming, JTAG, and power-up behavior must also be checked against the system clocking and reset architecture rather than inferred from the distributor listing.

RFQ Contact
M2GL005-TQ144I - 6060-Cell 1.2V FPGA | Microchip Technology
M2GL005-TQ144I

M2GL005-TQ144I - 6060-Cell 1.2V FPGA | Microchip Technology

The Microchip Technology M2GL005-TQ144I is an IGLOO2 flash-based field-programmable gate array with 6060 logic cells, a 1.2 V operating voltage, and a 144-pin TQFP package. It is designed for general-purpose programmable logic, bridging, I/O expansion, data conversion, system management, and secure connectivity implementations. The device combines reconfigurable logic resources with embedded flash configuration memory in a surface-mount package suitable for industrial and commercial PCB assemblies. An FPGA is a programmable-logic semiconductor whose digital circuits are defined by a configuration bitstream rather than fixed mask programming. Within the product hierarchy, the M2GL005 belongs to the IGLOO2 family of low-density FPGAs, which sit below higher-capacity programmable-logic devices and are commonly used as coprocessors, interface conditioners, system-control engines, or I/O concentrators. The M2GL005-TQ144I combines approximately 6000 logic elements with a 144-pin package to provide a practical balance of routing capacity, I/O availability, and board space. The device is identified as a 1.2 V IGLOO2 FPGA with 6060 cells. Its embedded flash configuration technology allows the implemented logic to be retained in the device, which is useful in systems that require reconfigurable peripherals, field updates, or application-specific digital functions without external configuration memory. The TQFP-144 package also provides a familiar leaded footprint for manufacturing processes that do not require an ultra-fine-pitch BGA package. Microchip identifies the IGLOO2 family as suitable for communications, industrial, and embedded applications where bridging, I/O expansion, conversion, system management, and secure connectivity functions are required. A typical design places the FPGA beside one or more interface controllers, connects it to sensors, displays, memory, or communications transceivers, and loads its configuration through a programmer or an in-system programming path. The exact logic-cell organization, supported I/O standards, configuration interface, and performance grades must be checked in the manufacturer datasheet for the selected device variant. One important design consideration is that the TQFP-144 footprint consumes more board area and has finer lead pitch than many modern BGA or QFN options. Designers should preserve access to all 144 pads, maintain suitable copper and solder-mask geometry, and route configuration signals away from sensitive analog or high-speed interfaces. Power, ground, decoupling, and unused-pin treatment should follow the manufacturer’s device-specific recommendations. This product page combines the exact M2GL005 family identifiers, package information, sourcing details, technical alternatives, application guidance, and PCB-focused design notes. It helps engineers identify whether the 144-pin IGLOO2 device provides the required logic density and can be substituted without changing the board footprint.

RFQ Contact
M2GL005-TQG144 - 6K LEs, 1.2V IGLOO2 FPGA | Microchip
M2GL005-TQG144

M2GL005-TQG144 - 6K LEs, 1.2V IGLOO2 FPGA | Microchip

The Microchip Technology M2GL005-TQG144 is a low-density IGLOO2 flash field-programmable gate array with 6,060 logic elements, a 1.2 V operating voltage, and a 144-pin TQFP package. It is designed for compact programmable-logic, bridging, I/O expansion, system-management, secure-connectivity, and general-purpose control functions where nonvolatile FPGA configuration and deterministic hardware logic are useful. An FPGA is a user-programmable semiconductor whose logic fabric, I/O, memory blocks, and dedicated resources can be configured after manufacture. The M2GL005 belongs to the IGLOO2 low-density FPGA hierarchy, where flash configuration integrates the control subsystem and programmable logic into one package. Compared with a discrete microcontroller plus supporting logic, it can consolidate parallel interfaces, protocol bridging, data acquisition, and control functions in a single device. The verified device data identifies 6,060 logic elements, a 1.2 V operating voltage, 703 Kbit of fabric RAM, and 64 KB of embedded SRAM. It is supplied in a 144-pin TQFP package measuring 20 x 20 mm with a 0.5 mm lead pitch. The package provides substantially more I/O and board-space flexibility than smaller FPGA packages, making the device appropriate for medium-complexity systems requiring numerous external connections. IGLOO2 devices combine programmable logic with dedicated flash configuration and memory resources. The 6K logic-element fabric is aimed at general-purpose functions rather than processor-heavy workloads. Available architecture details such as exact I/O standards, supported clock frequencies, voltage tolerances, and extended-temperature limits must be confirmed in the applicable Microchip datasheet and package documentation before schematic or timing closure. Typical uses include interface conversion, industrial control, communications support, medical equipment, defense systems, and embedded logic platforms. The large TQFP package can simplify fanout between an FPGA and discrete interface components, while the flash-based architecture eliminates a separate configuration PROM for designs supported by the device configuration flow. Designers should evaluate available I/O standards, core-voltage requirements, configuration pins, clock topology, and exposed power pins against the complete datasheet. A conservative power and pinout review is essential because the target data confirms the 1.2 V operating voltage but does not provide every pin name or bank-level electrical limit. This page combines verified manufacturer and distributor information, same-package replacement analysis, practical engineering guidance, and application-oriented selection criteria to provide engineering context beyond a basic distributor listing.

RFQ Contact
M2GL005-VF256 - IGLOO2 5K FPGA, 256-BGA | Microchip
M2GL005-VF256

M2GL005-VF256 - IGLOO2 5K FPGA, 256-BGA | Microchip

The Microchip Technology M2GL005-VF256 is an IGLOO2 flash field-programmable gate array with 5K logic elements, 161 I/O, and a 256-LFBGA package. The verified distributor record identifies the device as an IGLOO2 FPGA and provides the 256-LFBGA package designation. Its programmable logic resources support general-purpose bridging, I/O expansion and conversion, system management, secure connectivity, and embedded control functions. An FPGA is a reconfigurable semiconductor in the programmable-logic and semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines programmable logic, programmable interconnect, and configurable I/O in one device. This makes it useful when interfaces, control sequences, or product requirements evolve faster than fixed hardware can be changed. The M2GL005-VF256 is positioned as a low-density IGLOO2 device. The verified product page identifies IGLOO2 FPGAs for communications, industrial, medical, defense, and aviation markets, including functions such as Gigabit Ethernet or dual PCI Express control planes, bridging, I/O expansion and conversion, video and image processing, system management, and secure connectivity. The exact logic-cell count, voltage, speed grade, memory, package dimensions, and temperature grade for this exact suffix are not provided in the verified excerpts. Because the MPN suffix identifies the device ordering configuration, engineers should confirm the full electrical, pin, package, and temperature details in the manufacturer IGLOO2 datasheet and package documentation before release to production. The verified cross-reference results also identify the IGLOO2 pin-information user guide and the board and layout design guidelines as relevant design references. Typical uses include protocol bridging, industrial control, communications interfaces, image or video processing, and embedded system-management logic. The 256-LFBGA package favors compact designs but requires careful ball assignment, power planning, signal-integrity review, and thermal assessment. A board-level design should follow Microchip application note AN4153, which describes PCB design guidance for SmartFusion 2 and IGLOO2 devices. This page combines the verified Microchip product identity, distributor package information, official datasheet references, and design-document links into an application-oriented record. Exact electrical ratings and commercial pricing remain marked for validation because the supplied data does not provide those values.

RFQ Contact
M2GL005-VF256I - 6K LE IGLOO2 Flash FPGA | Microchip
M2GL005-VF256I

M2GL005-VF256I - 6K LE IGLOO2 Flash FPGA | Microchip

Microchip Technology M2GL005-VF256I is an IGLOO2 low-density flash field-programmable gate array with 6,000 logic elements, supplied in a 256-ball low-profile fine-pitch BGA package. It operates from a low 1.2 V nominal core supply, with a maximum supply voltage of 1.26 V, and provides 128 Kbits of embedded nonvolatile memory, 64 KB of embedded SRAM, and 703 Kbits of fabric RAM. The industrial-temperature suffix identifies the M2GL005-VF256I as an industrial-grade option. An FPGA is a programmable semiconductor whose logic blocks, interconnections, and I/O resources can be configured after manufacture. Within the device hierarchy, the M2GL005-VF256I is an IGLOO2 FPGA, a member of the broader programmable-logic and FPGA family. This architecture is useful when a design requires parallel logic, protocol conversion, signal conditioning, I/O expansion, or hardware control that would otherwise require multiple discrete components. The IGLOO2 family combines nonvolatile configuration memory with embedded SRAM and fabric RAM. According to the Microchip IGLOO 2 FPGA and SmartFusion 2 SoC FPGA datasheet, IGLOO2 devices integrate a high-performance memory subsystem with on-chip flash, 32 KB embedded SRAM, and multiple DMA controllers. For the M2GL005-VF256I specifically, family-level configuration identifies 6K logic elements and a 256-ball package, while the comparison data identifies 6,060 cells, 128 Kbits of embedded nonvolatile memory, 64 KB of embedded SRAM, and 703 Kbits of fabric RAM. The 256-ball package provides 256 terminals at a stated 0.8 mm terminal pitch and is intended for space-conscious embedded systems using multilayer printed-circuit-board layouts. Its 1.2 V operating point suits low-voltage embedded systems, while on-chip flash allows configuration data to remain resident without relying on an external configuration memory. The fabric RAM supports working data, buffers, and stateful logic, while the embedded SRAM provides additional memory for design-specific storage. Typical applications include protocol bridging, I/O expansion and conversion, system management, secure connectivity, industrial control, communications equipment, medical systems, and defense or aviation electronics. These uses align with the manufacturer’s positioning of IGLOO2 devices as general-purpose programmable-logic platforms for bridging, conversion, management, and connectivity functions. A board-level design should confirm the complete ball map, power rails, decoupling requirements, configuration interface, and I/O standards in the manufacturer packaging and pin-description documentation. Because the 256-ball footprint is fine-pitch and densely routed, PCB escape routing, solder-mask definition, and assembly-process capability deserve early review. This page combines the manufacturer device information with practical architecture, package, comparison, sourcing, and PCB-design guidance. It also distinguishes true same-package alternatives from related IGLOO2 devices that use different packages and therefore cannot be treated as drop-in replacements.

RFQ Contact
M2GL005-VF400 - 6K-Logic Cell IGLOO2 FPGA | Microchip
M2GL005-VF400

M2GL005-VF400 - 6K-Logic Cell IGLOO2 FPGA | Microchip

Microchip Technology M2GL005-VF400 is an IGLOO2 low-density flash field-programmable gate array with 6,060 logic cells, 169 I/O, a 1.2 V core, and a 400-LFBGA package. It is designed for compact programmable logic, I/O expansion, protocol bridging, interface conversion, system management, and secure connectivity applications. The device uses nonvolatile configuration memory, allowing its programmed logic configuration to be retained without a separate external configuration PROM. An FPGA is a programmable semiconductor in the broader logic-device hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic, memory resources, programmable I/O, and embedded control logic on one semiconductor die. The IGLOO2 family combines low-density logic capacity with nonvolatile flash configuration and is positioned below larger FPGAs used for high-channel-count processing or complex system-on-chip integration. Verified listings identify M2GL005-VF400 as an IGLOO2 FPGA containing 6,060 cells, 169 I/O, a 400-LFBGA package, and a 1.2 V supply. Its 400-pin package provides a high pin count relative to its logic density, making it useful when a design needs substantial parallel I/O, interface signaling, or control connectivity. The Microchip product family is specifically described for general-purpose bridging, I/O expansion and conversion, system management, and secure connectivity functions across communications, industrial, medical, defense, and aviation markets. The M2 prefix identifies the IGLOO2 family, while the 005 suffix identifies the smallest 6,060-cell member shown in the verified product data. The VF400 ordering code denotes the verified 400-LFBGA package arrangement. Exact timing, static-power, dynamic-power, supported I/O standards, temperature grade, and electrical limits must be selected from the manufacturer datasheet using the complete ordering code; those values were not supplied in the retrieved source text and are therefore not inferred here. Typical design roles include protocol-interface bridges, parallel-to-serial data collection, programmable I/O expansion, embedded system supervision, industrial control logic, and low-power communications infrastructure. An FPGA-based bridge is useful when fixed logic would require multiple interface translators or glue devices. Consolidating those functions into configurable logic can reduce component count and allow firmware-driven changes, but designers must budget I/O placement, timing closure, configuration checks, bank-voltage planning, and PCB-routing resources. The most important design consideration is exact migration control. Microchip's IGLOO2 VF400 packaging supports footprint-oriented design work, but pin features, bank assignments, voltage compatibility, and available I/O functions must be compared before replacing another device. Use Microchip application note AN4153 and the IGLOO2 pin-information document as supplemental PCB and pin-planning references. This page combines verified distributor data, manufacturer resources, package details, and migration guidance rather than estimating unreported electrical values.

RFQ Contact
M2GL005-VF400I - 6060-Cell 1.2V IGLOO2 FPGA | Microchip
M2GL005-VF400I

M2GL005-VF400I - 6060-Cell 1.2V IGLOO2 FPGA | Microchip

The Microchip Technology M2GL005-VF400I is an IGLOO2 flash field-programmable gate array with 6,060 logic cells, 169 I/O, and a 1.2 V core supply, housed in a 400-pin VFBGA package. It combines programmable logic with embedded flash configuration memory in a single surface-mount device, making it suitable for compact control, bridging, interface-conversion, and system-management designs. An FPGA is a reconfigurable digital semiconductor in which interconnected programmable logic blocks implement functions ranging from simple control logic to parallel processing, interface management, and protocol bridging. Within the product hierarchy, the M2GL005-VF400I belongs to the IGLOO2 low-density FPGA family, combining programmable logic, configuration memory, and user I/O in one integrated circuit. Its 169 I/O provide connections between the internal logic fabric and external board-level systems. The device provides 6,060 logic cells and operates from a 1.2 V core supply. Its configuration is stored in flash, allowing the implemented circuit to be retained without a separate volatile configuration memory device. The 400-pin VFBGA package supports dense PCB layouts where a larger-lead-count package would be difficult to route. Microchip identifies the M2GL005-VF400I as an industrial-temperature ordering option through the VF400I designation. The IGLOO2 architecture supports general-purpose programmable logic while retaining a low-power-oriented device family positioning. Its 169 I/O can accommodate digital control, status, communications, and data-handling paths when assigned through the design toolchain. Because the configuration memory is integrated, a finished design can reload its programmed logic after power is restored, which is useful in controllers that must resume deterministic operations without an external configuration loader. Typical uses include industrial control modules, protocol bridges, I/O expansion boards, embedded management controllers, communications equipment, and low-power instrumentation. The device is also appropriate for sensor interfaces, display-control logic, and compact data-acquisition systems where parallel programmable logic provides more flexibility than a fixed microcontroller peripheral set. PCB design should follow Microchip's IGLOO2 package, pin-description, and power-supply guidance. The 400-ball BGA requires careful escape routing, adequate ground-plane continuity, and assembly-process control because component inspection after soldering is difficult. Designers should also confirm the selected M2GL005-VF400I package variant against the PCB footprint and device configuration file before release. This page combines the manufacturer's IGLOO2 family information with package and ordering details for M2GL005-VF400I, helping engineers compare ordering variants, identify application fit, plan the PCB footprint, and evaluate drop-in device alternatives before requesting a quotation.

RFQ Contact