M2GL005-1VFG256 - 6K LEs IGLOO2 FPGA | Microchip | 256-BGA
MPN: M2GL005-1VFG256 ✓ ActiveM2GL005-1VFG256 Overview
A flash FPGA is a semiconductor device whose configuration memory stores the implemented circuit after programming. Because the configuration is retained in flash, the M2GL005-1VFG256 does not require an external configuration PROM for normal operation. It belongs to the broader hierarchy of programmable logic devices, which includes FPGAs, CPLDs, PAL devices, and other configurable semiconductor products. The IGLOO2 family is Microchip's low-density flash FPGA family, combining programmable logic with embedded programmable resources for interface, control, and signal-processing designs.
The M2GL005 device provides 6,060 logic elements and 161 I/O according to the manufacturer product information. The 719,872-bit embedded memory figure identifies the device's configuration-memory density, while the -1 suffix identifies the specific ordering variant. The VFG256 package designation identifies the 256-ball package used by this part. The exact pin assignments, bank voltages, I/O standards, and package dimensions should be taken from the IGLOO2 packaging and pin-description user guide when assigning PCB land patterns and power rails.
The IGLOO2 architecture is suited to designs requiring flexible logic, parallel and serial interfaces, control logic, and modest system-management functions. Its flash configuration supports standalone programmable-logic systems, while its I/O count enables communication interfaces, data acquisition front ends, and general-purpose control platforms. The device family is also used in communications, industrial, medical, and embedded applications, where logic density and package size are balanced against power, cost, and design complexity.
Typical uses include protocol bridging, I/O expansion, interface conversion, system supervision, secure connectivity, and embedded control. A designer can use the 161 available I/O to connect external memories, sensors, transceivers, displays, and industrial peripherals. The 256-ball package also supports dense fanout and fine-pitch routing, so careful PCB layout, decoupling, and via planning are essential. Review the pin-description user guide and the manufacturer datasheet before assigning supply voltages or confirming that a particular I/O standard is available on a specific ball.
When selecting this device, confirm the required logic capacity, I/O count, package, speed grade, temperature grade, and memory configuration before releasing the PCB design. The IGLOO2 packaging guide and the M2GL005 datasheet provide the authoritative electrical, mechanical, and pin-assignment information. This page combines the family-level device identity, package information, programming context, replacement guidance, and design considerations needed for initial component selection.
Drop-in alternatives for M2GL005-1VFG256 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with M2GL005-1VFG256 (same form factor and footprint) — differing in Package, Configuration Memory, Logic Elements, Device Type, Device Family.
M2GL005-VFG256
✅ Drop-InContact for price
View Datasheet →M2GL005-VFG256I
✅ Drop-InContact for price
View Datasheet →M2GL005-VF256I
✅ Drop-InContact for price
View Datasheet →M2GL005-1VF256
✅ Drop-InContact for price
View Datasheet →M2GL005-VF256
✅ Drop-InContact for price
View Datasheet →M2GL005-1VFG256 Maximum Ratings & Electrical Characteristics
| Device Type | IGLOO2 low-density flash FPGA |
| Logic Elements | 6,060 logic elements |
| I/O Count | 161 I/O |
| Configuration Memory | 719,872 bits |
| Package | 256-ball FBGA |
| Package Designation | VFG256 |
| Programming Memory Type | Flash |
| Device Family | IGLOO2 |
| Product Status | In production |
| Logic Resource Value | 6060 cells |
| General-Purpose Function | Bridging, I/O expansion, conversion, system management, and secure connectivity |
| Mounting Type | Surface mount |
M2GL005-1VFG256 vfg256 Pin Configuration Guide
Pin configuration for M2GL005-1VFG256 (vfg256 package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for M2GL005-1VFG256.
Refer to the datasheet for full pin configuration.
Typical Applications
M2GL005-1VFG256 is suitable for 6 applications: Communications Interface Bridging, Industrial I/O Expansion, Medical Monitoring and Control, Secure Connectivity and Authentication, Data Acquisition and Conversion, System Management and Control.
Communications Interface Bridging
The M2GL005-1VFG256 fits communications interface bridging because it provides 6,060 logic elements and 161 I/O for matching parallel, serial, or mixed-speed interfaces. Place the FPGA between host logic and external transceivers, using programmable logic to translate timing, frame format, buffering, and control signals. Its flash configuration allows the bridge to retain its programmed behavior without an external configuration PROM. The 256-ball package also provides a high pin count for simultaneous control, data, status, and clock routing. Confirm the required I/O voltage, direction, pull capability, and timing against the exact package pin guide before layout.
Recommended
Industrial I/O Expansion
The M2GL005-1VFG256 is suitable for industrial I/O expansion when a controller must connect many discrete sensors, actuators, relays, or field-bus devices. Its 161 I/O allow logic to consolidate input qualification, output decoding, latching, and fault reporting while the 6,060 logic elements implement control functions. The flash-based configuration supports deterministic standalone operation after programming. A compact 256-ball FBGA footprint can reduce system size, although high pin density demands careful escape routing, multilayer construction, and precise BGA assembly. Use the package-specific pin descriptions and device electrical limits to assign industrial voltage domains and protection networks.
Recommended
Medical Monitoring and Control
The M2GL005-1VFG256 can support medical monitoring and control subsystems that require deterministic programmable logic close to sensors and data-conversion circuits. Its 161 I/O can connect acquisition channels, status flags, isolation-control signals, and local actuator drivers, while 6,060 logic elements implement timing and state management. The flash configuration retains the programmed acquisition-control routine in a compact package. Designers should verify temperature grade, supply limits, clock performance, and all I/O standards for the exact ordering code before using the device in medical equipment. The manufacturer datasheet and package pin guide remain the controlling documents for electrical and mechanical implementation.
Recommended
Secure Connectivity and Authentication
The M2GL005-1VFG256 can implement programmable secure-connectivity functions such as protocol framing, authentication state machines, key-transfer control, and status monitoring. The 6,060 logic elements provide enough capacity for coordinated control logic, and 161 I/O provide connections to cryptographic, network, and debug peripherals. Because the IGLOO2 configuration is stored in flash, the device can operate as a dedicated local security controller after programming. Security claims still depend on the implemented algorithm, key-management architecture, and system integration rather than the FPGA family alone. Validate timing, I/O standards, and configuration access requirements using the exact device documentation.
Recommended
Data Acquisition and Conversion
The M2GL005-1VFG256 is suitable for data-acquisition and conversion logic when several parallel data sources must be normalized into a common format. Its 161 I/O can connect ADCs, digital sensors, memory interfaces, counters, and trigger signals, while 6,060 logic elements support buffers, counters, state machines, and data-format conversion. The 256-ball FBGA package helps reduce board area when I/O density is more important than assembly simplicity. For high-performance conversion, verify clock-input limits, supported I/O standards, output timing, and bank power requirements in the exact datasheet. Place decoupling and clock-routing resources according to the manufacturer layout guidance.
Recommended
System Management and Control
The M2GL005-1VFG256 can act as a centralized system-management controller for power sequencing, fault aggregation, watchdog handling, event logging, and peripheral arbitration. Its 161 I/O provide connections to status inputs, reset lines, indicators, and control outputs, while the flash configuration supports standalone operation after power-up configuration. The 6,060 logic elements are appropriate for multiple coordinated state machines rather than a single simple control function. In a compact embedded system, the 256-ball package reduces interconnect count, but it also raises BGA assembly and escape-routing requirements. Confirm startup behavior, configuration pins, and supported I/O types in the M2GL005 package documentation.
Recommended
Recommended Products Summary
Engineering reference data for M2GL005-1VFG256 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | M2GL005-VFG256 | M2GL005-VFG256I | M2GL005-VF256I | M2GL005-1VF256 | M2GL005-VF256 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-ball FBGA (VFG256) | 256-ball FBGA (VFG256) | 256-ball FBGA (VFG256) | 256-ball FBGA (VF256) | 256-ball FBGA (VF256) | 256-ball FBGA (VF256) |
| Device Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Logic Elements | 6,060 logic elements | 6K LEs | 6K LEs | 6K LEs | 6K LEs | 6K LEs |
| I/O Count | 161 I/O | 161 I/O | 161 I/O | 161 I/O | 161 I/O | 161 I/O |
| Configuration Memory | 719,872 bits | 719,872 bits | 719,872 bits | 719,872 bits | 719,872 bits | 719,872 bits |
| Configuration Memory Type | Flash | Flash | Flash | Flash | Flash | Flash |
| Ordering Code | M2GL005-1VFG256 | M2GL005-VFG256 | M2GL005-VFG256I | M2GL005-VF256I | M2GL005-1VF256 | M2GL005-VF256 |
| Programming Resource Compatibility | IGLOO2 programming flow | IGLOO2 programming flow | IGLOO2 programming flow | IGLOO2 programming flow | IGLOO2 programming flow | IGLOO2 programming flow |
Key Differentiators
- Combines 6,060 logic elements with 161 I/O in one 256-ball device (vs M2GL005-VFG256)
- Provides a package-level path within the M2GL005 family (vs M2GL005-VF256I)
- Retains configuration in flash for standalone programmable-logic operation (vs M2GL005-VF256)
Design Notes
Treat the 256-ball FBGA as a high-density escape-routing problem. Follow the manufacturer package drawing and recommended land pattern, confirm the PCB pad geometry and assembly process, and route power, ground, configuration, clock, and user I/O nets with appropriate escape geometry. Maintain continuous return paths beneath high-speed routes and follow the datasheet's layer-stack and decoupling recommendations. Do not derive ball assignments from a generic BGA footprint.
Plan separate core and I/O supply distribution according to the exact IGLOO2 electrical-characteristics table. Place required bulk and high-frequency decoupling capacitors close to the relevant supply balls, with short, low-inductance connections and a solid ground reference. Validate every external interface voltage before connecting it because an I/O standard can only be used when its corresponding supply domain and package pin support it. Power sequencing and configuration-pin requirements must also follow the manufacturer guidance.
Use the M2GL005 VFG256 package pin-description guide and BSDL data to constrain the FPGA design, not an inferred generic pinout. Lock configuration pins, clock inputs, reset behavior, and bank assignments before signal routing. Keep sensitive or high-speed interface paths short, provide adequate escape routing for external memories and transceivers, and match clock distribution to the timing requirements stated for the exact speed grade. Perform signal-integrity review before releasing the layout.
Do not assume that every 256-ball M2GL005 ordering code is a drop-in replacement merely because the ball count matches. Compare VFG256 and VF256 package definitions ball by ball, and check the -1, -I, speed, and temperature portions of the ordering code. Also verify configuration-memory capacity, supported I/O standards, clock limits, and programming-file compatibility. A PCB that uses the correct family but the wrong package code may still require a footprint change.
Compliance Information
The product page identifies the M2GL005 family as in production. Specific compliance declarations for the exact M2GL005-1VFG256 ordering code were not established.