M2GL005-1VF400I - 6060-Cell 1.2V IGLOO2 FPGA | Microchip
MPN: M2GL005-1VF400I ✓ ActiveM2GL005-1VF400I Overview
An FPGA is a semiconductor device whose digital logic, interconnections, and many interface functions are configured after manufacture. The M2GL005 device belongs to the IGLOO2 family, where the hierarchy is FPGA, programmable logic device, integrated circuit, and semiconductor. Its combination of reprogrammable logic, embedded flash, and a relatively small 400-ball package supports compact embedded systems requiring flexible hardware behavior or low-volume product customization.
Key device features include 6,060 logic cells, 169 available I/O, a 1.2 V operating core, and 719,872 bits of configuration memory. The M2GL005-1VF400I is identified as an industrial-temperature, -1 speed-grade option. It is supplied in a tray according to the listed product information. These attributes make the device applicable to industrial control, communications, bridge, input/output expansion, system management, and secure-connectivity designs.
The IGLOO2 architecture integrates programmable logic with on-chip flash and embedded SRAM, allowing a design to retain configuration after power is removed. The manufacturer describes the family as a low-density FPGA platform for general-purpose functions such as protocol bridging, I/O expansion, conversion, system management, and secure connectivity. The 400-pin package provides a high pin count for designs requiring numerous external signals, although engineers must use the package pin-description document when assigning ball locations and power rails.
Typical applications include industrial interface controllers, programmable communication links, data acquisition modules, embedded gateways, sensor aggregation systems, and compact control platforms. Its 1.2 V core and low-density resource structure are appropriate for control logic, status monitoring, protocol conversion, and modest parallel processing rather than processor-scale workloads. The industrial temperature rating supports operation across -40 °C to +100 °C when the complete board, power system, and enclosure meet their own environmental requirements.
The main design consideration is package and power planning. A 400-ball VFBGA requires a dense, multilayer PCB with short escape routes, careful via placement, and controlled return paths. Decoupling must be distributed across the device, and signal-integrity checks should include package-ball transitions and board-level clock integrity. The M2GL005-1VF400I is not a universal replacement for parts in smaller packages because the physical footprint and pin assignment must match exactly.
This page combines the manufacturer device information, verified distributor attributes, package details, comparison points, and practical implementation guidance to support device selection, PCB planning, and replacement review. It also distinguishes true same-footprint alternatives from unrelated FPGA families and records missing technical attributes without substituting assumptions for manufacturer data.
Drop-in alternatives for M2GL005-1VF400I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with M2GL005-1VF400I (same form factor and footprint) — differing in Device Type, Package, Configuration Memory, I/O Count, Lifecycle Status.
M2GL005-1VF400
✅ Drop-InContact for price
View Datasheet →M2GL005-VF400I
✅ Drop-InContact for price
View Datasheet →M2GL005-1VFG400I
✅ Drop-In📋 Reference alternative (not in catalog)
M2GL005-VFG400I
✅ Drop-InContact for price
View Datasheet →M2GL005-1VF400I Maximum Ratings & Electrical Characteristics
| Product Family | IGLOO2 low-density FPGA |
| Device Type | Field-programmable gate array (FPGA) |
| Logic Cells | 6,060 cells |
| Embedded Flash Memory | 719,872 bits |
| Available I/O | 169 I/O |
| Core Voltage | 1.2 V |
| Operating Temperature Range | -40 °C to +100 °C |
| Temperature Grade | Industrial |
| Speed Grade | -1 |
| Package Type | VFBGA-400, 17 mm × 17 mm |
| Package Pin Count | 400 pins |
| Package Pitch | 0.8 mm |
| Mounting Type | Surface mount |
| Packaging | Tray |
| Minimum Order Quantity | 90 units |
| Factory Lead Time | 12 weeks |
| Lifecycle Status | Active |
| RoHS Status | Non-compliant |
| Configuration Storage | Embedded flash |
M2GL005-1VF400I 0.8 mm Pin Configuration Guide
Pin configuration for M2GL005-1VF400I (0.8 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for M2GL005-1VF400I.
Refer to the datasheet for full pin configuration.
Typical Applications
M2GL005-1VF400I is suitable for 6 applications: Industrial Control Interface, Industrial Communication Bridge, Sensor Aggregation and Data Acquisition, Programmable System Management, Secure Connectivity and Authentication, Programmable I/O Expansion.
Industrial Control Interface
The M2GL005-1VF400I fits industrial control interfaces that combine logic coordination with a modest number of external signals. Its 6,060 logic cells can support state machines, interlocks, data acquisition control, status reporting, and communication sequencing without requiring a larger FPGA. The 1.2 V core reduces the central logic supply requirement, while the -40 °C to +100 °C industrial rating suits equipment operating across a broad temperature range. Engineers should allocate the 169 available I/O according to the package bank rules, distribute power decoupling near the 400-ball device, and reserve configuration pins for reliable boot behavior.
Recommended
Industrial Communication Bridge
The M2GL005-1VF400I can implement a compact communication bridge between serial interfaces, parallel processors, or legacy industrial equipment. The programmable logic supports protocol conversion, framing, checksum generation, buffering, and timing control, while embedded flash retains the configuration after power removal. Its 6,060-cell capacity is appropriate for moderate-throughput gateway logic rather than processor-intensive protocol stacks. A practical design should use the 1.2 V core rail for internal logic, separate I/O supplies where required, and route high-speed or isolation-sensitive interfaces away from switching power stages.
Recommended
Sensor Aggregation and Data Acquisition
The M2GL005-1VF400I is suitable for acquiring and aggregating signals from multiple sensors when deterministic control and flexible I/O assignment are important. Its 169 I/O provide substantial connectivity for digital sensor channels, enables, interlocks, and data-capture signals, while the programmable fabric can implement counters, filters, threshold logic, and timestamp interfaces. The 1.2 V core and industrial temperature range support embedded acquisition equipment, but analog signals still require suitable front-end circuits. Validate input thresholds and bank voltage compatibility directly from the manufacturer pin-description guide before assigning external sensor lines.
Recommended
Programmable System Management
The M2GL005-1VF400I can serve as a dedicated system-management controller for power sequencing, fault monitoring, watchdog functions, health reporting, and configuration routing. Its embedded flash allows the management policy to be updated without continuously driving the main processor, and its programmable logic can respond quickly to hardware events. The device's 6,060 logic cells are well matched to deterministic supervisory functions, and its industrial rating supports embedded platforms. Design the supervisory path to operate independently of the controlled load, use fail-safe defaults, and verify every reset and fault input against the package ball assignments.
Recommended
Secure Connectivity and Authentication
The M2GL005-1VF400I can implement hardware-assisted authentication, key-handling state machines, protocol checks, and secure link control where the selected algorithm fits within 6,060 logic cells and available memory. Embedded flash supports persistent configuration, while programmable hardware can isolate sensitive operations from a general-purpose processor. The 1.2 V core and industrial temperature range make the FPGA appropriate for embedded secure-connectivity equipment. Security strength must be evaluated separately from functional fit, including the chosen algorithm, key-storage architecture, timing behavior, and whether dedicated cryptographic hardware is required.
Recommended
Programmable I/O Expansion
The M2GL005-1VF400I is well suited to adding programmable I/O, test points, protocol converters, and legacy interface logic to a compact embedded board. Its 169 I/O and six thousand logic cells allow a design to consolidate several small discrete interface devices into one configurable FPGA. The 400-pin VFBGA requires careful escape routing, so board planning should begin with the Microchip pin-description guide and package drawing. Confirm voltage-tolerance and bank restrictions for every external signal, keep sensitive interfaces away from noisy switching nodes, and validate the complete ball pattern before releasing the PCB layout.
Recommended
Recommended Products Summary
Engineering reference data for M2GL005-1VF400I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | M2GL005-1VF400 | M2GL005-VF400I | M2GL005-1VFG400I | M2GL005-VFG400I |
|---|---|---|---|---|---|
| Package | VFBGA-400, 17 mm × 17 mm | VFBGA-400, 17 mm × 17 mm | VFBGA-400, 17 mm × 17 mm | VFBGA-400, 17 mm × 17 mm | VFBGA-400, 17 mm × 17 mm |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Logic Cells | 6,060 cells | 6,060 cells | 6,060 cells | 6,060 cells | 6,060 cells |
| Embedded Flash Memory | 719,872 bits | 719,872 bits | 719,872 bits | 719,872 bits | 719,872 bits |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Available I/O | 169 I/O | 169 I/O | 169 I/O | 169 I/O | 169 I/O |
| Configuration Storage | Embedded flash | Embedded flash | Embedded flash | Embedded flash | Embedded flash |
Key Differentiators
- Exact industrial and speed-grade ordering option (vs M2GL005-1VF400)
- Industrial-grade package alternative with identical core resources (vs M2GL005-VF400I)
- Same-footprint sourcing path within the IGLOO2 family (vs M2GL005-1VFG400I)
- Capacity upgrade path in the same VF400 footprint class (vs M2GL050-1VF400)
Design Notes
Treat the 400-ball VFBGA as a demanding fine-pitch layout rather than a generic BGA. Start from the Microchip package drawing and pin-description guide, preserve the specified ball geometry, and route every power and ground connection using the recommended via pattern. Place decoupling capacitors and their vias close to the corresponding balls, avoid long stubs, and reserve escape routing for clocks and high-speed interfaces before placing slower logic.
The 1.2 V core should have a low-noise supply sized for both static consumption and switching activity. Separate core and I/O rail requirements in the power tree, account for the voltage tolerance and current limits of every bank, and verify the regulator's startup behavior against the FPGA configuration requirements. Place bulk energy storage near the device and distribute high-frequency decoupling across the package rather than concentrating it at one edge.
Assign signals using the manufacturer's bank table and package-pin guide, especially for external clocks, configuration pins, and mixed-voltage I/O. Keep switching-regulator loops, high-current outputs, and isolation barriers away from precision inputs and clock networks. Maintain short return paths under high-speed routes, use a continuous ground reference where appropriate, and inspect the final stack-up for any VFBGA-to-layer transition that could compromise signal integrity.
Do not treat another 400-pin IGLOO2 suffix as automatically interchangeable. The logic-cell count, core voltage, and package may match, but speed grade, temperature grade, configuration behavior, pin assignments, and qualification requirements can still determine suitability. Before substitution, compare the complete ordering codes, review the package revision, and recompile the design against the selected device's constraints. For larger designs, use Microchip's VF400 migration guidance and check every utilization and timing constraint.
Compliance Information
The listed product information marks the M2GL005-1VF400I as RoHS non-compliant. No REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification claim is stated.