Products (44,000+)

MAX3221EIDBRG4 - 3V-5.5V RS-232 Transceiver | Texas Instruments
MAX3221EIDBRG4

MAX3221EIDBRG4 - 3V-5.5V RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221EIDBRG4 is a 3 V to 5.5 V single-channel RS-232 line driver and receiver with a 250 kbps data rate and ±15 kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin SSOP with a 5.30 mm body width and is supplied in the G4 lead-free, tape-and-reel configuration. An RS-232 transceiver is an interface IC that combines a differential line driver with a line receiver. It converts logic-level signals into RS-232-compatible levels and converts incoming RS-232 signals back into logic levels. Within the interface hierarchy, the MAX3221EIDBRG4 belongs to the RS-232 transceiver family of interface ICs and is designed for short-distance point-to-point serial links using the RS-232 protocol. The principal operating features include a 3 V to 5.5 V supply range, one driver and one receiver, and a maximum signaling rate of 250 kbps. The RS-232 pins are protected to ±15 kV under the Human Body Model and to ±8 kV under the IEC 61000-4-2 contact-discharge test. Air-discharge protection reaches ±15 kV, providing a substantial margin for exposed serial ports that may encounter electrostatic discharge. This single-channel architecture is useful when a system requires one bidirectional RS-232 port without allocating space for a multi-channel transceiver. The broad supply-voltage range allows operation from 3.3 V or 5 V system rails, while the integrated line-driver and receiver circuitry reduces the number of external interface components. The SSOP-16 package provides a practical option for compact industrial, instrumentation, and embedded-control equipment. Typical applications include configuration-port links in industrial equipment, serial adapters, point-of-sale terminals, laboratory instruments, maintenance interfaces, and embedded systems that exchange commands or diagnostic data with a host computer. At 250 kbps, the interface is appropriate for moderate-speed command and control traffic rather than high-bandwidth bulk transfer. Designers should use the charge-pump capacitor values and external driver/receiver capacitors specified by the manufacturer datasheet. Keep the RS-232 connector-side traces away from sensitive analog circuitry, provide the required bypass capacitance close to the supply pins, and consider adding connector-side protection where cables extend beyond the enclosure or into industrial environments. This page combines manufacturer specifications, package and ordering information, drop-in replacement guidance, comparison data, and practical interface-design notes. It is intended to help engineers confirm electrical compatibility, package fit, protection level, and application suitability before assigning the MAX3221EIDBRG4 to a PCB or updating an existing BOM.

RFQ Contact
MAX3221EIPW - 250kbps Single RS-232 Transceiver | TI
MAX3221EIPW

MAX3221EIPW - 250kbps Single RS-232 Transceiver | TI

The Texas Instruments MAX3221EIPW is a single-channel RS-232 line driver and receiver rated for 250kbps operation, with a 3V to 5.5V supply range and ±15kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin TSSOP surface-mount package. An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into logic-compatible levels. The MAX3221E belongs to the RS-232 transceiver family within interface ICs and power-management-adjacent signal-conditioning devices. It provides the electrical interface between an asynchronous communication controller and a serial-port connector. The MAX3221E uses a single power supply and an on-chip charge pump with four small external capacitors. Its single driver and single receiver arrangement suits point-to-point serial links, while the enhanced ESD protection helps improve robustness at connector-facing pins. Operation across a 3V to 5.5V supply range supports both 3.3V and 5V system rails. The device meets TIA/EIA-232-F requirements and provides IEC 61000-4-2 ESD protection. These qualifications are important because RS-232 implementations frequently connect through external connectors where cables and ESD events can introduce transient voltage. The MAX3221EIPW is therefore suitable for industrial control links, service interfaces, and embedded equipment requiring a compact single-channel RS-232 solution. Typical uses include configuring a UART port on an embedded controller, upgrading an industrial peripheral that still uses an RS-232 connector, and creating a service or debug link between a host computer and field equipment. Because the interface is single-channel, applications needing multiple simultaneous RS-232 ports generally require additional transceiver channels or separate interface devices. Place the four charge-pump capacitors close to their assigned pins, and route the RS-232 driver and receiver traces as a protected cable-side interface. Keep logic-side UART traces away from connector and charge-pump nodes, provide a stable ground return, and verify the external protection network against the system’s ESD requirements. This page combines the manufacturer’s electrical specifications, package details, qualified substitute analysis, and practical PCB guidance. It also highlights where MAX3221E family alternatives share the same TSSOP-16 footprint and where their shutdown, enable, or ESD characteristics require verification before replacement.

RFQ Contact
MAX3221EIPWG4 - 250kbps Single RS-232 Transceiver | TI
MAX3221EIPWG4

MAX3221EIPWG4 - 250kbps Single RS-232 Transceiver | TI

Texas Instruments MAX3221EIPWG4 is a single-channel RS-232 line transceiver with one driver and one receiver, a 250kbps maximum data rate, and ±15kV ESD protection. It operates from a single 3V to 5.5V supply and is packaged in a 16-pin TSSOP. The MAX3221E series provides the electrical interface between an asynchronous communications controller and an RS-232 connector. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and the voltage-domain signals used by RS-232 equipment. The MAX3221E belongs to the line-driver and receiver hierarchy, converts one transmit and one receive channel, and uses an on-chip charge pump with four external capacitors to generate the bipolar voltage required for RS-232 transmission. The device supports 3V to 5.5V operation and data rates up to 250kbps. Its ±15kV ESD protection applies to the RS-232 pins and helps protect the interface when cables are connected or disconnected. According to the manufacturer product page, the MAX3221 family meets TIA/EIA-232-F requirements, while the MAX3221E description identifies IEC 61000-4-2 ESD protection on the RS-232 pins. Typical uses include industrial serial-port equipment, data acquisition systems, embedded controllers, test and measurement instruments, and service interfaces that communicate through legacy RS-232 links. The single-channel architecture is appropriate when only one physical RS-232 channel is required and board area is more important than multi-channel integration. The 16-pin TSSOP supports compact surface-mount layouts, but its gull-wing leads require adequate spacing between the device and surrounding circuitry. The MAX3221EIPWG4 is marked obsolete and is no longer manufactured. New designs should confirm the lifecycle status of the selected replacement and compare its pinout, supply range, data rate, ESD rating, and charge-pump capacitor requirements before release. The obsolete status also makes obsolete-part sourcing, traceability, and long-term availability important procurement considerations. This page combines the manufacturer’s electrical specifications, lifecycle information, package details, application guidance, and a strict drop-in comparison framework. For a production redesign, verify the complete pin description and capacitor values in the manufacturer datasheet, then confirm supply-chain status using the Request a Quote form on this page before committing the component to a new PCB revision.

RFQ Contact
MAX3221EIPWR - 250kbps Single RS-232 Transceiver | TI (Tape & Reel)
MAX3221EIPWR

MAX3221EIPWR - 250kbps Single RS-232 Transceiver | TI (Tape & Reel)

The Texas Instruments MAX3221EIPWR is a single-channel RS-232 line driver and receiver rated for 250kbps operation, with a 3V to 5.5V supply range and ±15kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin TSSOP surface-mount package. An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into logic-compatible levels. The MAX3221E belongs to the RS-232 transceiver family within interface ICs and power-management-adjacent signal-conditioning devices. It provides the electrical interface between an asynchronous communication controller and a serial-port connector. The MAX3221E uses a single power supply and an on-chip charge pump with four small external capacitors. Its single driver and single receiver arrangement suits point-to-point serial links, while the enhanced ESD protection helps improve robustness at connector-facing pins. Operation across a 3V to 5.5V supply range supports both 3.3V and 5V system rails. The device meets TIA/EIA-232-F requirements and provides IEC 61000-4-2 ESD protection. These qualifications are important because RS-232 implementations frequently connect through external connectors where cables and ESD events can introduce transient voltage. The MAX3221EIPWR is therefore suitable for industrial control links, service interfaces, and embedded equipment requiring a compact single-channel RS-232 solution. Typical uses include configuring a UART port on an embedded controller, upgrading an industrial peripheral that still uses an RS-232 connector, and creating a service or debug link between a host computer and field equipment. Because the interface is single-channel, applications needing multiple simultaneous RS-232 ports generally require additional transceiver channels or separate interface devices. Place the four charge-pump capacitors close to their assigned pins, and route the RS-232 driver and receiver traces as a protected cable-side interface. Keep logic-side UART traces away from connector and charge-pump nodes, provide a stable ground return, and verify the external protection network against the system’s ESD requirements. This page combines the manufacturer’s electrical specifications, package details, qualified substitute analysis, and practical PCB guidance. It also highlights where MAX3221E family alternatives share the same TSSOP-16 footprint and where their shutdown, enable, or ESD characteristics require verification before replacement.

RFQ Contact
MAX3221EUE+T - 1/1 RS-232 Transceiver | Analog Devices
MAX3221EUE+T

MAX3221EUE+T - 1/1 RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EUE+T is a single-driver, single-receiver RS-232 transceiver rated for 120 Kbps operation, supplied from a 3.0 V to 5.5 V rail and housed in a 16-pin TSSOP package. It is designed for compact equipment that requires a bidirectional RS-232 connection without the larger channel count and footprint of a multi-driver interface IC. The device supports a 1 A supply current and belongs to the MAX3221 family with automatic shutdown and wake-up functionality. An RS-232 transceiver is an interface IC that translates between logic-level signals and the voltage levels used by RS-232 equipment. The transmitter converts a low-voltage digital signal into the bipolar voltage swing required by the RS-232 standard, while the receiver converts the incoming bipolar signal back into a logic-level output. Within the product hierarchy, the MAX3221EUE+T is an RS-232 transceiver, a serial-interface IC, and a member of the broader interface and semiconductor categories. The principal device characteristics are its 120 Kbps data rate, one transmit channel, one receive channel, 3.0 V to 5.5 V operating supply range, and 16-pin TSSOP package. Analog Devices describes the MAX3221 family as using AutoShutdown to reduce supply current to approximately 1 µA when no valid receiver signal is present. This low-power behavior is useful in battery-operated and intermittently connected systems where a permanently powered interface would otherwise waste energy. The MAX3221 family differs from the larger MAX3223 and MAX3243 devices in channel count and package size. The MAX3221 provides one driver and one receiver in a 16-pin package, making it appropriate for point-to-point links, while the MAX3223 and MAX3243 support multiple channels. AutoShutdown allows the interface to remain attached to a connector while reducing current consumption during inactivity, provided the system uses the shutdown and wake-up control functions as described by the manufacturer. Typical uses include industrial serial adapters, point-of-sale equipment, instrumentation, data acquisition systems, embedded control consoles, and maintenance interfaces. The single-channel arrangement is well suited to a local host port or service connector. For designs using a longer cable or a noisy industrial environment, the circuit should also consider connector grounding, cable length, signal polarity, and the ESD protection requirements of the complete system rather than relying on the transceiver alone. For layout, place the transceiver close to the RS-232 connector and keep the charge-pump, bypass-capacitor, driver, and receiver paths compact. Keep sensitive logic traces away from the switching node of the internal charge pump. Decouple the supply pins locally, use the package pin definitions in the manufacturer datasheet, and confirm external protection requirements for the connector and cable environment. This page consolidates the manufacturer family information, verified distributor listings, package details, compatible interface alternatives, and practical design guidance into one engineering reference. It also distinguishes documented performance from parameters that require confirmation in the complete datasheet before a new PCB is released for production.

RFQ Contact
MAX3221EUE+TG1Z - 3V RS-232 Transceiver | Analog Devices
MAX3221EUE+TG1Z

MAX3221EUE+TG1Z - 3V RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EUE+TG1Z is a single-channel RS-232 transceiver with one transmitter and one receiver, operating from a 3 V to 5.5 V supply in a 16-pin TSSOP package. The device provides a 250 kbps data rate, automatic shutdown and wake-up behavior, and enhanced electrostatic-discharge protection rated at ±15 kV IEC-ESD. Its MAX3221E family architecture combines RS-232 line-driver and receiver functions in one package, making it suitable for compact serial-interface equipment. An RS-232 transceiver is an interface IC that converts logic-level digital signals to RS-232 voltage levels and converts incoming RS-232 signals back to logic levels. The MAX3221E belongs to the broader RS-232 transceiver, line-driver/receiver, communications-interface, and interface-IC hierarchy. Its single-channel arrangement is appropriate when a system needs one serial port rather than multiple RS-232 channels. The main advantages of the MAX3221E family are its low 3 V supply operation, 250 kbps maximum signaling rate, automatic power management, and enhanced ESD protection. AutoShutdown reduces supply consumption when the receiver does not detect a valid signal, while automatic wake-up restores operation when valid data returns. The manufacturer describes the MAX3221, MAX3223, and MAX3243 as achieving 1 uA supply current with this shutdown mechanism. The EUE+TG1Z ordering code identifies the MAX3221E device in a 16-pin TSSOP package, with the industrial temperature option and tape-and-reel production form indicated by the ordering suffix. The MAX3221E family supports 3 V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. Its protected receiver and driver outputs are intended for equipment where the external serial port can be exposed to electrostatic discharge or cable transients. Typical applications include industrial serial consoles, programmable test equipment, point-of-sale terminals, instrument-control links, and embedded systems that retain an RS-232 port. In each case, the transceiver can operate from a 3 V system rail while providing the larger voltage swings required by RS-232. The 250 kbps capability also supports moderately high-speed legacy serial links, although the chosen protocol, cable length, and receiver thresholds remain important system-level constraints. Designers should follow the manufacturer’s recommended charge-pump capacitor and logic-side bypass-capacitor connections, keep the RS-232 trace route away from sensitive analog or high-speed digital nets, and provide the required protection and grounding strategy at an external connector. The device’s automatic shutdown behavior should also be checked against the system’s idle-state and remote-wakeup expectations. This page combines the exact orderable MPN, interface characteristics, package information, practical application guidance, and verified comparison context. It also identifies where detailed pin mapping, lifecycle status, and complete alternative-specific electrical limits must be confirmed in the manufacturer datasheet before design release.

RFQ Contact
MAX3221IDB - 250kbps Single RS-232 Transceiver | TI
MAX3221IDB

MAX3221IDB - 250kbps Single RS-232 Transceiver | TI

The Texas Instruments MAX3221IDB is a single-channel RS-232 line driver and receiver with a 3 V to 5.5 V supply range, data rate up to 250 kbps, and ±15 kV ESD protection in a 16-pin SSOP package. The device provides one driver and one receiver with a dedicated receiver-enable function for serial-port interfaces. An RS-232 transceiver is an interface integrated circuit that converts logic-level UART signals into RS-232 voltage levels and converts returning RS-232 signals back into logic-compatible levels. The MAX3221IDB sits between an asynchronous communication controller and a serial connector, combining a line driver, line receiver, and dual charge-pump circuit in one compact package. Its headline operating specifications are a 3 V to 5.5 V supply range, 250 kbps maximum signaling rate, and ±15 kV pin-to-pin ESD protection. The integrated dual charge-pump circuit generates the positive and negative voltage levels required for RS-232 transmission without requiring an external supply. A dedicated receiver-enable pin supports controlled reception when the host does not need the incoming signal continuously. The device meets the electrical requirements stated for TIA/EIA-232-F and is intended for asynchronous serial communication. Because the MAX3221IDB combines only one transmit channel and one receive channel, it is most appropriate where the system needs a compact point-to-point RS-232 interface rather than multiple channels. Its 16-pin SSOP format also supports conventional surface-mount PCB assembly. Typical uses include industrial serial controllers, point-to-point data links, configuration-port interfaces, test equipment, and embedded systems that communicate with RS-232 equipment. The 250 kbps capability is suitable for common serial-port baud rates while the internal charge pumps simplify implementation compared with a discrete level-shifting circuit. When laying out the circuit, place the charge-pump capacitors and interface protection components close to their associated pins, and route the driver and receiver traces away from sensitive analog circuitry. Confirm connector-level signal integrity with the intended cable, baud rate, grounding arrangement, and ESD environment before production release. This page combines the manufacturer specifications, drop-in replacement information, application guidance, and design considerations needed to evaluate the MAX3221IDB for a single-channel RS-232 interface. Use the Request a Quote form on this page for current commercial availability and lead-time information.

RFQ Contact
MAX3221IDBE4 - 250kbps Single RS-232 Transceiver | Texas Instruments
MAX3221IDBE4

MAX3221IDBE4 - 250kbps Single RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3221IDBE4 is a single-channel RS-232 line driver and receiver operating from 3 V to 5.5 V, supporting data rates up to 250 kbps with ±15 kV ESD protection. The device is packaged in a 16-pin SSOP. It provides one transmitter and one receiver for compact serial-interface designs where both RS-232 signal conditioning and board-space efficiency are important. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 levels and converts received RS-232 levels back into logic levels. It belongs to the RS-232 transceiver class of interface ICs, with the broader hierarchy progressing from transceiver to interface controller, communication interface, and semiconductor. The MAX3221 integrates a dual charge-pump circuit with the driver and receiver, reducing the external component count required for a working RS-232 port. The 3 V to 5.5 V supply range allows operation in systems powered from 3.3 V or 5 V rails. Its 250 kbps data-rate capability suits legacy serial equipment, industrial control links, configuration ports, and service interfaces. Dedicated enable control can place the driver in a reduced-drive state when the associated receiver is not needed, while the integrated charge pump provides the RS-232 level translation required by the standard interface. The ±15 kV ESD protection rating applies to the RS-232 serial-port connection pins and ground, adding valuable protection for equipment that may be connected to external cabling. ESD resilience is particularly important in industrial and communications equipment where a disconnected or partially installed cable can expose a port to electrostatic discharge. The 16-pin SSOP footprint also supports compact layouts without requiring a large connector-side interface package. Typical uses include single-port RS-232 links in industrial controllers, test equipment, data acquisition systems, configuration and programming ports, and service interfaces for embedded products. The part is most appropriate where one bidirectional serial channel is needed, the data rate is below 250 kbps, and a 3.3 V or 5 V system supply is available. Designs requiring several RS-232 ports normally favor a multichannel transceiver instead. A key implementation consideration is to place charge-pump capacitors, supply bypassing, and the RS-232 connector interface components exactly as shown in the manufacturer’s recommended layout. Keep connector-side traces short, provide a low-impedance ground return, and avoid routing sensitive signals alongside RS-232 outputs. These practices reduce radiated emissions, susceptibility to cable-borne noise, and ESD-related stress concentration. This page combines the key MAX3221IDBE4 operating specifications, verified package information, drop-in replacement guidance, application-focused design guidance, and a parameter comparison for faster engineering selection. It is intended to help engineers determine whether the single-channel architecture, 250 kbps limit, SSOP footprint, and integrated ESD protection fit a particular RS-232 interface.

RFQ Contact
MAX3221IDBG4 - Single RS-232 Transceiver | Texas Instruments
MAX3221IDBG4

MAX3221IDBG4 - Single RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221IDBG4 is a single-channel RS-232 line driver and receiver, or transceiver, designed for asynchronous serial communication. It operates from a 3 V to 5.5 V supply, supports data rates up to 250 kbit/s, and provides ±15 kV human-body-model ESD protection on the serial-port connection pins, including ground. The device is packaged in a 16-pin SSOP. An RS-232 transceiver is an interface IC that converts logic-level signals from a host, controller, or embedded processor into RS-232 voltage levels, while converting incoming RS-232 signals back into CMOS-compatible logic. This device belongs to the interface IC hierarchy, combining a line driver, line receiver, and dual charge-pump voltage-conversion circuitry in one package. It is designed to bridge modern digital electronics with legacy RS-232 equipment. The MAX3221IDBG4 provides one driver and one receiver, making it appropriate for point-to-point serial links, industrial equipment, data-acquisition systems, service interfaces, and embedded control products. Its 3 V to 5.5 V operating range allows operation from both 3.3 V and 5 V systems. The 250 kbit/s data rate supports moderate-speed serial communication while the integrated charge pumps generate the bipolar voltage levels required by RS-232 without requiring a separate negative supply. The ±15 kV ESD rating applies to the human-body model and is intended to improve protection when cables are connected to exposed communication ports. This protection does not eliminate the need for appropriate system-level grounding, shielding, or surge-protection design. The device also uses charge-pump circuitry, so power-supply bypass capacitors and careful layout around the flying-capacitor connections remain important for stable operation. Typical uses include service-console interfaces, industrial control panels, instrumentation, point-of-sale equipment, and systems that retain an RS-232 port while using a modern microcontroller. Its single-channel architecture minimizes board area compared with multi-channel transceivers when only one serial port is required. When selecting this interface, verify the connector's signal polarity, the host-side logic levels, the required data rate, and the grounding arrangement. Place the charge-pump capacitors and supply bypass capacitors close to their specified pins, and observe the recommended connector and cable-routing practices for exposed RS-232 ports. This page combines device specifications, sourcing guidance, compatible alternatives, and practical interface-design notes for engineers evaluating the MAX3221IDBG4.

RFQ Contact
MAX3221IDBR - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221IDBR

MAX3221IDBR - 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221IDBR is a single-channel RS-232 line driver and receiver rated for data rates up to 250 kbps, with a 3 V to 5.5 V supply range and ±15 kV human-body-model ESD protection. The device is packaged in a 16-pin SSOP package. It provides one transmit channel, one receive channel, a receiver-enable control, and an automatic power-down input. An RS-232 transceiver is an interface IC that translates low-voltage logic levels into the bipolar voltage levels used by RS-232 equipment. In the signal-chain hierarchy, the MAX3221IDBR belongs to the RS-232 interface family and converts between a host controller's logic-level UART signals and the ±RS-232 line interface. Its integrated dual charge-pump circuit generates the signal voltages required for transmission without a separate DC supply. The 3 V to 5.5 V operating range supports both 3.3 V and 5 V systems. According to the manufacturer datasheet, the device operates up to 250 kbps, accepts 5 V logic input when powered from 3.3 V, and has a typical low standby current of 1 µA. The receiver-enable function can reduce quiescent consumption when the receive path is not required. The serial-port connection pins, including ground, have pin-to-pin ESD protection rated at ±15 kV using the human-body model. Internally, the MAX3221IDBR combines one RS-232 driver, one RS-232 receiver, and a dual charge-pump circuit. Four external 0.1 µF capacitors support charge-pump operation. The receiver converts the differential RS-232 input to a CMOS-compatible logic output, while the driver converts CMOS-compatible logic input to the bipolar line voltage. The interface is designed for asynchronous communication controllers and conforms to TIA/EIA-232-F and ITU V.28 requirements. Typical uses include industrial serial-port adapters, point-of-sale equipment, instrumentation, data-acquisition systems, embedded console connections, and legacy peripheral upgrades. The 250-kbps capability is suitable for RS-232 links that need more bandwidth than a conventional slow serial port while retaining compatibility with established communication standards. The compact SSOP-16 footprint also helps reduce board area in space-constrained controller modules. When laying out the circuit, place the four 0.1 µF charge-pump capacitors close to their associated pins and route the RS-232 connector interface for minimum noise pickup. Confirm signal levels, grounding, cable length, and the target data rate before release. The receiver-enable and power-down functions should be driven deliberately so that low-power operation does not interfere with system startup or receive-data handling. This page consolidates the manufacturer's electrical characteristics, package information, verified drop-in alternatives, application guidance, and practical layout considerations into one engineering-focused reference for selecting and implementing the MAX3221IDBR.

RFQ Contact
MAX3221IDBRE4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221IDBRE4

MAX3221IDBRE4 - 250kbps RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3221IDBRE4 is a single-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply at speeds up to 250 kbps, with ±15 kV ESD protection and a 16-pin SSOP package. It provides one driver, one receiver, a dual charge-pump circuit, a dedicated receiver enable input, and 5 V-compatible logic inputs when operated from 3.3 V. An RS-232 transceiver is an interface IC that converts between single-ended logic signals and the bipolar voltage levels used by RS-232 equipment. The MAX3221 belongs to the line-driver and receiver hierarchy within interface ICs, where it sits between a host controller and an external serial connector. Its charge-pump circuitry generates the positive and negative voltages required by the RS-232 transmitter without a separate negative supply. Key features include operation from 3 V to 5.5 V, a maximum data rate of 250 kbps, and ±15 kV human-body-model ESD protection on the serial-port connection pins, including ground. The receiver supports a dedicated enable input, while the device maintains a typical 1 µA standby current. Four external 0.1 µF charge-pump capacitors support the internal voltage conversion, and 5 V logic inputs are accepted with a 3.3 V supply. The MAX3221 implements one half-duplex RS-232 channel, combining a transmitter and receiver in a compact package. Its internal dual charge pump produces the bipolar signal levels required by TIA/EIA-232-F and ITU V.28 interfaces. The target MAX3221IDBRE4 ordering code identifies the 16-pin SSOP configuration, allowing placement with surface-mount assembly while preserving a conventional narrow-body footprint. Typical uses include single-port serial diagnostics, point-of-sale equipment, industrial control links, embedded service interfaces, and legacy peripheral connections. The 250 kbps capability supports low- and moderate-speed serial links, while the dual supply range permits operation from both 3.3 V and 5 V systems. The low standby current is useful when equipment must retain a receive path without continuously loading the supply. Circuit design should preserve the charge-pump capacitor connections, place the four 0.1 µF capacitors close to their associated pins, and route the RS-232 connector and protected serial lines away from sensitive analog and high-speed digital traces. Confirm logic thresholds, signal polarity, flow control, and connector grounding before replacing an existing interface design. This product overview combines the manufacturer's electrical characteristics, package information, interface standards, ESD capability, and practical implementation guidance with engineering-focused comparisons for drop-in device selection.

RFQ Contact
MAX3221IDBRG4 - 250kbps Single RS-232 Transceiver | Texas Instruments
MAX3221IDBRG4

MAX3221IDBRG4 - 250kbps Single RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221IDBRG4 is a single-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply at rates up to 250 kbit/s. The device is packaged in a 16-pin SSOP and provides one driver and one receiver with ±15 kV electrostatic-discharge protection on the bus pins. Its dual charge-pump design supports low-voltage digital systems that must communicate through an RS-232 interface. An RS-232 transceiver is an interface IC that converts logic-level transmit and receive signals into RS-232 line levels and back again. It belongs to the transceiver hierarchy within interface ICs and combines a line driver, line receiver, and charge-pump voltage generation in one package. The MAX3221 is intended for point-to-point serial links, industrial equipment, data acquisition systems, and legacy peripheral connections that do not require multiple RS-232 channels. The MAX3221IDBRG4 accepts a 3 V to 5.5 V supply and can operate with a 3.3 V supply even when its digital input signals reach 5 V. Four external 0.1 µF charge-pump capacitors are specified. Typical standby current is only 1 µA, helping conserve power when the interface is inactive. The device also meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28, providing standards-based operation for conventional RS-232 links. Internally, the dual charge-pump circuit develops the positive and negative voltages required by the RS-232 driver. The receiver converts the corresponding differential voltage at its input back into a logic-level signal. This architecture allows the MAX3221 to communicate with systems whose logic supply is lower than the traditional 5 V RS-232 interface level while avoiding a separate negative supply rail in the equipment. Typical applications include industrial serial controllers, test equipment, configuration interfaces, printers, scanners, and embedded systems that expose an RS-232 port. The 250 kbit/s maximum data rate is suitable for moderate-speed control and data-transfer links. Designers should still account for cable length, baud-rate tolerance, grounding, and transceiver enable timing when establishing a reliable connection. The principal design consideration is the charge-pump capacitor network. Place the four 0.1 µF capacitors close to their associated IC pins, follow the polarity shown in the manufacturer datasheet, and keep the high-voltage RS-232 outputs away from sensitive logic traces. The bus pins receive ±15 kV HBM ESD protection, but cable-side transients and secondary protection requirements should be evaluated for the completed system. This product page consolidates the exact electrical ratings, package information, drop-in cross-reference options, interface applications, and PCB-design considerations needed to evaluate and implement the MAX3221IDBRG4. It also distinguishes confirmed same-package replacements from options that require a different footprint, helping prevent redesign errors during sourcing and second-source decisions.

RFQ Contact
MAX3221IPW - 250kbps Single RS-232 Transceiver | Texas Instruments
MAX3221IPW

MAX3221IPW - 250kbps Single RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221IPW is a single-channel RS-232 line driver/receiver with a 3 V to 5.5 V supply, a maximum data rate of 250 kbps, and ±15 kV ESD protection, housed in a 16-pin TSSOP package. It combines one transmit driver, one receive channel with a dedicated enable input, and a dual charge-pump circuit for converting low-voltage logic into RS-232 bipolar levels. An RS-232 transceiver is the interface between a low-voltage digital controller and a serial port using bipolar signal levels. Also called an RS-232 line driver/receiver or interface transceiver, it belongs to the interface IC hierarchy and translates controller-side logic into RS-232 levels while converting an incoming RS-232 signal back to logic. The MAX3221 supports one communications direction, making it suitable for point-to-point serial links, control consoles, industrial equipment, and embedded systems. Key features include operation from a 3 V to 5.5 V supply, support for data rates up to 250 kbps, and ±15 kV ESD protection on the serial-port connection pins, including ground. The device accepts 5 V logic input while operating from a 3.3 V supply. Its dual charge-pump architecture requires only 0.1 µF external capacitors, while low standby current supports power-conscious designs. Technically, the MAX3221 contains one line driver, one line receiver with a dedicated enable pin, and the charge-pump circuitry needed to generate positive and negative RS-232 voltage levels. According to the manufacturer datasheet, the interface meets TIA/EIA-232-F requirements and provides the electrical interface between an asynchronous communication controller and a serial-port connector. This combination allows a modern microcontroller or processor to communicate with legacy RS-232 equipment without implementing discrete level-shifting circuitry. Typical applications include industrial automation and factory equipment, point-to-point serial adapters, test and measurement instruments, security and access-control systems, and embedded diagnostic ports. The dedicated receiver enable provides a way to place the receive path in a controlled state, while the 3.3 V-compatible supply helps simplify interfaces based on modern logic rails. When designing a board around the MAX3221IPW, place the required charge-pump capacitors close to their corresponding pins and route the RS-232 connector interface away from sensitive analog or high-speed digital paths. External protection, grounding, and cable-routing practices remain important because the specified ±15 kV ESD rating applies to the device pins rather than to every possible system-level surge, lift, or cable event. This product record combines verified manufacturer specifications, distributor availability information, same-footprint replacement data, and practical interface-design guidance. It is intended to help engineers identify the correct RS-232 transceiver, verify package and pin compatibility, plan decoupling, and distinguish a genuine drop-in replacement from a merely similar line-driver or receiver.

RFQ Contact
MAX3221IPWG4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221IPWG4

MAX3221IPWG4 - 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221IPWG4 is a single-channel RS-232 line driver and receiver operating from 3 V to 5.5 V, supporting data rates up to 250 kbps in a 16-pin TSSOP package. It provides ±15 kV electrostatic-discharge protection on the serial-port connection pins and uses on-chip charge-pump circuitry to generate the bipolar voltage required by RS-232 transmitters. An RS-232 transceiver is an interface IC that converts logic-level signals from a controller or embedded processor into RS-232 levels and converts incoming RS-232 signals back into logic levels. Within the broader interface-IC and data-communication hierarchy, the MAX3221 provides a compact single-channel solution for industrial control, embedded instrumentation, POS equipment, and legacy serial-port connectivity. The principal operating features include a 3 V to 5.5 V supply range, a maximum signaling rate of 250 kbps, one driver and one receiver, and ±15 kV ESD protection. Its low supply current supports power-conscious equipment, while the integrated charge pumps eliminate the need for an external ±12 V supply. These characteristics suit systems where reliable serial communication is required without the space and power burden of a multi-channel transceiver. The MAX3221 architecture separates the logic-side interface from the RS-232-side pins so that a host UART can connect directly to the transceiver. Its RS-232 implementation supports the electrical signaling requirements identified by the manufacturer as TI A/EIA-232-F. The device is suited to point-to-point links where one transmitter communicates with one receiver through a protected cable or connector. Typical uses include industrial serial controllers, test equipment, data-acquisition systems, embedded-service interfaces, and legacy peripheral connections. In these systems, the MAX3221 can bridge a 3.3 V or 5 V UART to an RS-232 port while providing ESD protection at the connector-facing pins. Designers should verify signal levels, connector wiring, ground references, and cable length in the final system. For a new PCB, follow the pin-description table and typical application circuit in the manufacturer datasheet when assigning traces and decoupling capacitors. Keep the charge-pump capacitor and I/O routing within the layout recommendations, and provide a low-impedance return path between connected equipment to reduce common-mode voltage and improve communication reliability. This page consolidates the MAX3221IPWG4 operating limits, package information, sourcing structure, verified drop-in candidate, comparison fields, and practical RS-232 design considerations into a compact engineering reference for component selection and board design.

RFQ Contact
MAX3221IPWR - 250kbps Single RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX3221IPWR

MAX3221IPWR - 250kbps Single RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX3221IPWR is a single-channel RS-232 line driver/receiver with a 3 V to 5.5 V supply, a maximum data rate of 250 kbps, and ±15 kV ESD protection, housed in a 16-pin TSSOP package. It combines one transmit driver, one receive channel with a dedicated enable input, and a dual charge-pump circuit for converting low-voltage logic into RS-232 bipolar levels. An RS-232 transceiver is the interface between a low-voltage digital controller and a serial port using bipolar signal levels. Also called an RS-232 line driver/receiver or interface transceiver, it belongs to the interface IC hierarchy and translates controller-side logic into RS-232 levels while converting an incoming RS-232 signal back to logic. The MAX3221 supports one communications direction, making it suitable for point-to-point serial links, control consoles, industrial equipment, and embedded systems. Key features include operation from a 3 V to 5.5 V supply, support for data rates up to 250 kbps, and ±15 kV ESD protection on the serial-port connection pins, including ground. The device accepts 5 V logic input while operating from a 3.3 V supply. Its dual charge-pump architecture requires only 0.1 µF external capacitors, while low standby current supports power-conscious designs. Technically, the MAX3221 contains one line driver, one line receiver with a dedicated enable pin, and the charge-pump circuitry needed to generate positive and negative RS-232 voltage levels. According to the manufacturer datasheet, the interface meets TIA/EIA-232-F requirements and provides the electrical interface between an asynchronous communication controller and a serial-port connector. This combination allows a modern microcontroller or processor to communicate with legacy RS-232 equipment without implementing discrete level-shifting circuitry. Typical applications include industrial automation and factory equipment, point-to-point serial adapters, test and measurement instruments, security and access-control systems, and embedded diagnostic ports. The dedicated receiver enable provides a way to place the receive path in a controlled state, while the 3.3 V-compatible supply helps simplify interfaces based on modern logic rails. When designing a board around the MAX3221IPWR, place the required charge-pump capacitors close to their corresponding pins and route the RS-232 connector interface away from sensitive analog or high-speed digital paths. External protection, grounding, and cable-routing practices remain important because the specified ±15 kV ESD rating applies to the device pins rather than to every possible system-level surge, lift, or cable event. This product record combines verified manufacturer specifications, distributor availability information, same-footprint replacement data, and practical interface-design guidance. It is intended to help engineers identify the correct RS-232 transceiver, verify package and pin compatibility, plan decoupling, and distinguish a genuine drop-in replacement from a merely similar line-driver or receiver.

RFQ Contact
MAX3221IPWRG4 - 250kbps RS-232 IC | Texas Instruments
MAX3221IPWRG4

MAX3221IPWRG4 - 250kbps RS-232 IC | Texas Instruments

Texas Instruments MAX3221IPWRG4 is a single-channel RS-232 line driver and receiver interface IC operating from a 3 V to 5.5 V supply at up to 250 kbps. It provides one driver, one receiver with a dedicated enable pin, a dual charge-pump circuit, and ±15 kV ESD protection on the bus pins. The device is packaged in a 16-pin TSSOP. An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a serial communications link. It belongs to the interface IC hierarchy and combines a line driver, line receiver, voltage conversion, and electrostatic-discharge protection. This integration allows a UART controller operating at 3.3 V or 5 V to communicate with equipment using the TIA/EIA-232-F electrical interface. The MAX3221 supports a 3 V to 5.5 V supply, accepts 5 V logic input with a 3.3 V supply, and operates at data rates up to 250 kbps. Its dual charge-pump circuit supports the positive and negative RS-232 voltage levels using four external 0.1 µF capacitors. Low standby current of 1 µA is useful when the receiver or transmitter must remain powered while conserving system energy. The ±15 kV human-body-model ESD rating applies to the RS-232 bus connections, including ground, and adds protection at the external interface where cables and connectors can expose the circuit to electrostatic discharge. The receiver includes a dedicated enable function, giving the host hardware control over when the received data path is active. The interface meets or exceeds TIA/EIA-232-F and ITU V.28 requirements. Typical uses include single-port RS-232 links in industrial controllers, test equipment, point-of-sale systems, instrumentation, and service interfaces. The device is especially suitable where a compact design needs bidirectional signal translation, low standby consumption, and built-in bus-pin ESD protection without implementing a discrete charge-pump circuit. Design with the four external charge-pump capacitors positioned close to their associated pins. Keep the RS-232 connector-side traces away from sensitive analog or high-speed digital paths, provide a reliable chassis or signal-ground connection, and evaluate additional protection when exposed cables exceed the device's ±15 kV HBM rating. This page combines manufacturer specifications, package details, practical interface-design guidance, and same-footprint replacement options to support component selection, schematic review, PCB layout, and sourcing decisions for the MAX3221IPWRG4.

RFQ Contact
MAX3221MDBREP - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221MDBREP

MAX3221MDBREP - 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221MDBREP is a single-channel RS-232 line driver and receiver with a 3 V to 5.5 V supply, operation up to 250 kbps, and ±15 kV ESD protection. It is packaged in a 16-pin SSOP and includes one driver, one receiver, and a dual charge-pump circuit. An RS-232 transceiver is an interface IC that translates between TTL/CMOS logic levels and RS-232 voltage levels. The MAX3221 belongs to the RS-232 transceiver hierarchy, where it connects digital controllers or data terminals to external serial equipment. Its charge-pump circuit develops the positive and negative voltages required by RS-232 without a separate external DC supply. The 3 V to 5.5 V operating range permits use in both 3.3 V and 5 V systems. The MAX3221MDBREP supports 250 kbps operation, accepts 5 V logic input with a 3.3 V supply, and provides bus-pin ESD protection exceeding ±15 kV using the human body model. Automatic power-down disables the driver when the interface is inactive to reduce power consumption. Internally, the device combines one RS-232 line driver, one line receiver, and dual charge pumps with external flying capacitors. This architecture provides a compact solution for isolated or non-isolated point-to-point serial links. The SSOP-16 package is suitable for industrial and embedded equipment where one RS-232 channel is required and board area must remain modest. Typical uses include serial-port adapters, diagnostic interfaces, industrial-control equipment, battery-powered instruments, and legacy peripheral connections. Placing the transceiver near the DB9 or equivalent connector helps limit exposure of the high-voltage RS-232 pins and improves protection against electrostatic discharge and externally coupled noise. Design the external charge-pump capacitors and supply bypass capacitor according to the manufacturer datasheet. Confirm the connector-side ground, logic ground strategy, cable length, and data rate before releasing the layout. Do not expose TTL-side signals to RS-232 voltage levels or substitute the charge-pump capacitors with arbitrary ceramic values. This product page consolidates the exact electrical ratings, package information, replacement analysis, interface use cases, and practical layout guidance for engineers evaluating the MAX3221MDBREP in a compact RS-232 design.

RFQ Contact
MAX3222CPN+ - 3V RS-232 Transceiver, 1Mbps, 18-PDIP | Maxim
MAX3222CPN+

MAX3222CPN+ - 3V RS-232 Transceiver, 1Mbps, 18-PDIP | Maxim

The Analog Devices (formerly Maxim Integrated) MAX3222CPN+ is a 3.0V to 5.5V powered, true RS-232 transceiver that integrates two line drivers, two line receivers, and a dual charge pump in a single 18-pin PDIP through-hole package. It supports data rates up to 1 Mbps (with the MAX3222/MAX3232 family) and uses only four external 0.1 uF capacitors to generate the ±5.5V RS-232 rails from a single 3V supply. The "+" suffix indicates a lead-free, RoHS-compliant shipping tube. A True RS-232 transceiver is a line driver/receiver IC that translates logic-level UART signals (0/VCC) to RS-232 voltage levels (±5V to ±15V) while also shifting external RS-232 levels back down to logic levels. It is a core sub-category of the serial-communication interface hierarchy: UART -> RS-232 transceiver -> line driver/receiver -> interface IC -> integrated circuit. The internal charge-pump voltage doubler/inverter eliminates the bulky ±12V supplies required by legacy RS-232 designs. Key features include an enhanced ESD protection of ±15 kV HBM on the RS-232 bus pins (driver outputs and receiver inputs), guaranteed 120 kbps data rate, and a low 1 uA supply current in shutdown. The MAX3222 is pin-, package-, and functionally compatible with the industry-standard MAX242, providing a low-power modern replacement for legacy designs. The MAX3222 architecture uses an internal dual charge pump (with external 0.1 uF flying and reservoir capacitors) to generate the +5.5V and -5.5V rails required by the RS-232 standard. It includes five receivers/drivers in companion parts (MAX3237 has 3 Rx / 5 Tx, MAX3241 has 5 Rx / 3 Tx) so designers can match port count to application without changing footprint. Typical applications include industrial point-of-sale terminals, networking equipment serial ports, embedded UART-to-RS-232 bridges, and legacy PC peripherals where a through-hole DIP form factor is preferred for hand-prototyping or repair. The wide 3.0V-5.5V supply range lets the same part work from a 3.3V MCU rail or a 5V logic rail. When designing with this device, place the four 0.1 uF charge-pump capacitors as close to the IC pins as possible to minimize supply ripple and meet RS-232 voltage levels under full load. For battery-powered designs, take advantage of the SHDN pin (active-low) to drop quiescent current to 1 uA between transmissions.

RFQ Contact
MAX322CUA+ - Dual SPST 35 Ohm Analog Switch | Analog Devices
MAX322CUA+

MAX322CUA+ - Dual SPST 35 Ohm Analog Switch | Analog Devices

Analog Devices MAX322CUA+ is a precision, dual-supply, dual SPST analog CMOS switch with 35 ohm on-resistance, housed in an 8-uMAX package. The device contains two independently controlled switches in a 1:1 configuration and operates from dual supply rails. Its low 1.25 mW power consumption, 100 pA maximum leakage current, and switching times of 150 ns maximum turn-on and 100 ns maximum turn-off make it suitable for precision signal-routing and battery-powered instrumentation. An analog switch is an electronic routing component that connects or isolates signal paths under digital control. A single-pole, single-throw, or SPST, switch provides one conducting path when enabled and a high-impedance path when disabled. The MAX322 family belongs to the analog-switch hierarchy within interface ICs and supports signal selection, test-point isolation, sampling circuits, and compact measurement systems. The MAX322CUA+ provides two independent switch channels, a 1:1 signal configuration, and 35 ohm on-resistance. Its 1.25 mW power consumption is particularly useful in portable equipment where continuous circuit loading affects battery life. Maximum leakage is listed at 100 pA, helping preserve the amplitude and accuracy of signals measured through high-impedance nodes. Maximum turn-on and turn-off times are 150 ns and 100 ns, respectively, while the specified switch charge is 5 pC. The dual-supply architecture allows signals to be routed around a zero-volt reference without adding a level-shifting function. Control inputs determine when each SPST path conducts, making the device appropriate for precision analog signal paths rather than high-voltage or high-current switching. Because the on-resistance is specified at 35 ohm, source impedance, signal amplitude, and downstream capacitance should be considered when calculating insertion error and settling behavior. Typical uses include battery-powered multimeters, low-power sensor acquisition, laboratory test equipment, audio measurement paths, and portable diagnostic instruments. In each case, the device can route a selected input to an amplifier, measurement converter, or control circuit while isolating inactive channels. The small 8-uMAX package also supports compact instruments where PCB area is limited. For layout, place the device close to the switched signal source and destination to minimize PCB capacitance and resistance. Keep sensitive analog traces away from digital control routing, provide a stable ground reference, and use the pin-description table in the manufacturer datasheet when assigning tracks. Do not use the switch as a power switch; its 35 ohm on-resistance is intended for signal routing rather than load-current distribution. This page combines the manufacturer product information, distributor listings, and cross-reference results with practical guidance on switching performance, layout, signal integrity, application fit, and replacement selection. It also identifies where package, pin, electrical, lifecycle, and compliance details must be confirmed in the official MAX322 documentation before a production release.

RFQ Contact
MAX3232CAE+ - Dual RS-232 Transceiver | Analog Devices
MAX3232CAE+

MAX3232CAE+ - Dual RS-232 Transceiver | Analog Devices

The Analog Devices MAX3232CAE+ is a low-power, true RS-232 transceiver with two transmitters and two receivers, operating from a 3.0 V to 5.5 V single supply in a 16-pin SSOP package. It supports data rates up to 1 Mbps and uses a dual charge-pump architecture to generate the positive and negative voltage levels required by true RS-232 links. The low-dropout transmitter output stage preserves RS-232 performance across the complete supply range, while the receiver design supports low-power operation. A true RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar, differential voltage signaling used by RS-232. In the product hierarchy, the MAX3232CAE+ belongs to the RS-232 interface transceiver class, within interface ICs and broader semiconductor signal-conditioning devices. It is intended for equipment that must communicate over longer cable runs where logic-level signaling would not provide sufficient noise margin. Key features include two driver channels, two receiver channels, a 3.0 V to 5.5 V supply range, operation up to 1 Mbps, and a 16-pin SSOP footprint. The dual charge pumps generate the required RS-232 voltage levels without a separate negative supply. Its low-dropout transmitter architecture is particularly useful when the transceiver operates from a 3.0 V rail, where maintaining useful driver amplitude would otherwise be difficult. The integrated charge-pump and driver circuitry places most of the signal-conversion function inside the package. External charge-pump capacitors and receiver input bypass capacitors must still be connected according to the manufacturer datasheet. The MAX3232CAE+ supports both transmit and receive paths in one device, allowing a compact design to implement a complete asynchronous RS-232 port using one transceiver package. Typical applications include industrial control equipment, test and measurement instruments, point-of-sale terminals, security systems, and embedded serial-port interfaces. It is especially appropriate where equipment must support a legacy RS-232 connector while the rest of the system uses low-voltage digital logic. The 1-Mbps capability also accommodates instrument-control links and industrial data buses operating below the transceiver's maximum rate. Design the circuit around the exact SSOP-16 footprint and follow the manufacturer datasheet for charge-pump capacitor values, receiver capacitor placement, and unused-channel handling. Keep the interface connector and transceiver analog pins away from fast digital clocks and switching supplies. Check the complete power-up and shutdown sequence in the system specification, especially when the host interface may remain active while the RS-232 rails change state. This product page combines the MAX3232CAE+ device specifications with package guidance, application-oriented design notes, and a compatibility-focused comparison. It is intended to help engineers confirm electrical fit, understand implementation trade-offs, and evaluate suitable drop-in choices without relying on a generic component listing alone.

RFQ Contact
MAX3232CAE+T - 1Mbps RS-232 Transceiver | Analog Devices
MAX3232CAE+T

MAX3232CAE+T - 1Mbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3232CAE+T is a 2/2 RS-232 transceiver with a 3.0 V to 5.5 V supply range, operation up to 1 Mbps, and a 16-SSOP package. It integrates two drivers and two receivers for bidirectional RS-232 links and uses four external 0.1 µF charge-pump capacitors to generate the bipolar voltage required by true RS-232 receivers. A true RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into CMOS-compatible logic. In the product hierarchy, the MAX3232 belongs to the RS-232 interface transceiver class, within interface ICs and broader data-conversion and communication-semiconductor systems. It allows equipment using TTL or CMOS serial logic to connect to legacy RS-232 ports without discrete level-shifting circuits. The MAX3232CAE+T supports operation from 3.0 V to 5.5 V, making it suitable for systems powered from 3.3 V or 5 V rails. Its specified data rate reaches 1 Mbps, while the integrated charge-pump circuit eliminates the need for a separate switched-capacitor power converter. The two-driver, two-receiver arrangement supports two serial channels or paired transmit and receive functions on one device. The MAX3232 family is designed for compatibility with established RS-232 interface conventions. According to the manufacturer product page, the MAX3232 is pin, package, and functionally compatible with the industry-standard MAX232, while the related MAX3232E family offers enhanced low-power and ESD-related features. The CAE part number identifies the 16-SSOP configuration, and the +T suffix identifies tape-and-reel production packaging. Typical uses include industrial serial adapters, configuration and programming ports, point-of-sale equipment, test systems, embedded control modules, and legacy peripheral connections. The 1 Mbps capability supports higher-rate serial links, although cable length, capacitance, grounding, and signal-integrity requirements must be considered when selecting an RS-232 channel rate. For layout, place the four 0.1 µF charge-pump capacitors close to their designated device pins and maintain short return paths for the switching currents. Keep the RS-232 connector and transceiver traces away from sensitive analog or high-speed digital signals. Verify external line protection and grounding because IC ESD ratings do not replace correctly selected connector protection. This page consolidates the manufacturer specifications, package details, sourcing information, pin-compatible alternatives, comparison parameters, and practical RS-232 layout guidance into a focused engineering reference for evaluating the MAX3232CAE+T in new and existing serial-interface designs.

RFQ Contact
MAX3232CD - 2/2 RS-232 Transceiver, 250 kbit/s | Texas Instruments
MAX3232CD

MAX3232CD - 2/2 RS-232 Transceiver, 250 kbit/s | Texas Instruments

The Texas Instruments MAX3232CD is a 3 V to 5.5 V multichannel RS-232 line driver and receiver with two drivers, two receivers, 250 kbit/s operation, and ±15 kV ESD protection, housed in a 16-pin SOIC package. It is designed for bidirectional serial-interface links where logic-level CMOS signals must cross a noisy RS-232 cable through level translation and electrostatic-discharge protection. An RS-232 transceiver is an interface IC that combines transmit drivers, receive buffers, and the voltage-level conversion required between low-voltage digital logic and the bipolar RS-232 signal system. The MAX3232CD belongs to the broader interface-IC hierarchy: RS-232 transceiver, communications interface, interface IC, and semiconductor. Its dual-channel arrangement suits point-to-point links, industrial-control connections, console ports, and embedded equipment where both directions of communication are required. The verified device data identifies a 3 V to 5.5 V supply range, two drivers, two receivers, operation up to 250 kbit/s, typical low supply current of 300 µA, and ±15 kV ESD protection. The interface accepts 5 V logic, while the integrated charge-pump and external-capacitor arrangement supports RS-232 signal generation without a separate external power supply. The 16-pin SOIC package provides a compact surface-mount footprint suitable for PCB-based equipment. Typical applications include RS-232 console connections, industrial serial controllers, point-of-sale equipment, test instruments, and embedded systems communicating with legacy peripherals. The 250 kbit/s capability supports substantially faster signaling than conventional low-speed serial links while retaining the standardized RS-232 voltage interface. The external charge-pump capacitors must be placed according to the manufacturer layout guidance to preserve signal integrity and ensure stable operation. When selecting MAX3232CD, verify the required package, temperature range, supply voltage, channel count, and cable-side signaling expectations. Do not substitute a similar part solely by transceiver count; check pinout, logic compatibility, propagation behavior, and the exact package suffix. The MAX3232CD is listed by distributors as a 16-SOIC, 2/2 full RS-232 transceiver, making the package and channel configuration central to drop-in design decisions. This page consolidates verified distributor pricing, source URLs, package information, interface specifications, and design guidance for engineers evaluating the MAX3232CD. It also distinguishes verified facts from fields that require datasheet confirmation before production release.

RFQ Contact
MAX3232CDBE4 - 250kbps Dual RS-232 Transceiver | TI
MAX3232CDBE4

MAX3232CDBE4 - 250kbps Dual RS-232 Transceiver | TI

Texas Instruments MAX3232CDBE4 is a dual-channel RS-232 line transceiver with two drivers, two receivers, a 3 V to 5.5 V supply range, and data rates up to 250 kbit/s in a 16-pin SSOP package. It also provides ±15 kV electrostatic-discharge protection on the serial-port connection pins, allowing it to serve as the physical interface between a modern digital system and an RS-232 port. An RS-232 transceiver is an interface IC that converts low-voltage digital logic levels into RS-232-compatible signal levels and converts received RS-232 signals back into logic-compatible levels. Within the broader semiconductor hierarchy, this device belongs to the interface IC class, connecting UART controllers and microcontrollers to the drivers, receivers, connectors, and cabling used by point-to-point serial equipment. The principal features include two drivers and two receivers, operation from a 3 V to 5.5 V VCC supply, and throughput up to 250 kbit/s. The device meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28, while its ±15 kV human-body-model ESD protection strengthens the bus-terminal connection against electrostatic discharge. The operating-voltage range permits use with both 3.3 V and 5 V system logic environments. Internally, the MAX3232 combines its dual driver and receiver circuitry with a dual charge-pump circuit that develops the positive and negative voltage levels required by RS-232. This architecture supports a practical interface between TTL or CMOS-compatible UART logic and an RS-232 port without requiring a separate external charge-pump supply. The integrated protection is specified for the serial-port connection pins, including ground, where applicable. Typical uses include industrial serial adapters, point-of-sale equipment, data-acquisition systems, embedded control consoles, and legacy peripheral connectivity. Its 250 kbit/s capability accommodates many RS-232 control, configuration, and instrument-control links while remaining compatible with the electrical requirements of the RS-232 standard. The most important layout consideration is the placement of the charge-pump capacitors and the protection-network connections. Keep the required external capacitors close to their specified pins, provide a low-impedance ground return, and route the RS-232 connector-side nets away from sensitive logic. Validate the complete board for ESD return current because connector protection alone does not eliminate the need for sound enclosure and ground design. This page combines the manufacturer interface information with package-specific selection guidance, verified drop-in alternatives, and practical PCB-design guidance. It is intended to help engineers confirm electrical fit, package compatibility, protection requirements, and implementation details before incorporating the MAX3232 into a new RS-232 design.

RFQ Contact
MAX3232CDBG4 - 3V to 5.5V RS-232 Transceiver | TI
MAX3232CDBG4

MAX3232CDBG4 - 3V to 5.5V RS-232 Transceiver | TI

The Texas Instruments MAX3232CDBG4 is a 3 V to 5.5 V, 1 Mbps RS-232 line transceiver with two drivers and two receivers in a 16-pin SSOP package. It supports full-duplex serial communication while operating from a single 3.0 V to 5.5 V supply. The device also provides ±15 kV ESD protection on its RS-232 pins and uses four external 0.1 µF charge-pump capacitors. An RS-232 transceiver is an interface IC that converts logic-level signals from a microcontroller, DSP, or computer into RS-232-compliant line levels and converts received RS-232 signals back into logic levels. The MAX3232 belongs to the line-driver and line-receiver hierarchy within interface ICs, bridging modern CMOS logic and the voltage levels used by legacy serial ports, industrial controllers, and point-of-sale equipment. Principal features include a 1 Mbps maximum data rate, a 3.0 V to 5.5 V supply range, two transmit channels, two receive channels, and low-power operation. The commercial-temperature grade covers 0 °C to 70 °C. Its SSOP-16 package is suitable for compact PCB layouts where a larger SOIC footprint would be undesirable, and the lead-free gull-wing package is compatible with standard surface-mount assembly. The transceiver generates the positive and negative RS-232 voltages from the single supply using an internal charge-pump circuit. Four 0.1 µF capacitors are required for that circuit, while the MAX3232 family operates without an external 5 V supply. Because RS-232 is a single-ended, unbalanced interface, the transceiver provides level translation but not galvanic isolation or long-distance noise immunity comparable with differential interfaces such as RS-485. Typical applications include industrial control panels, serial adapters, automated test equipment, point-of-sale terminals, security systems, and embedded instrumentation. The 1 Mbps capability supports both legacy printer and mouse protocols as well as higher-rate data links when the connected equipment supports the corresponding protocol and cable characteristics. When laying out the board, place the four charge-pump capacitors close to the device and keep the RS-232 traces away from sensitive analog or high-speed digital nets. Confirm the ground reference and cable shielding, and verify the logic levels against the host interface before energizing the board. This page organizes the electrical ratings, package details, equivalent transceiver options, and application guidance needed to evaluate the MAX3232CDBG4 for a new RS-232 interface design.

RFQ Contact