Products (44,000+)

MAX3232CDE4 - 250 kbps RS-232 Transceiver | Texas Instruments
MAX3232CDE4

MAX3232CDE4 - 250 kbps RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3232CDE4 is a 2/2 full-duplex RS-232 line driver and receiver designed for 3 V to 5.5 V supply operation, with a maximum data rate of 250 kbps and ±15 kV ESD protection. The device is packaged in a 16-pin SOIC surface-mount package. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into logic-compatible outputs. It belongs to the interface IC hierarchy, where transceiver ICs bridge older differential or single-ended communication ports with modern digital systems. The MAX3232CDE4 uses charge-pump circuitry to generate the positive and negative voltage levels required by RS-232 without a separate negative supply. The principal features are two driver channels, two receiver channels, operation from a single 3 V to 5.5 V supply, and data rates up to 250 kbps. Its ±15 kV human-body-model ESD protection strengthens the interface against electrostatic discharge encountered during industrial, commercial, and communications equipment. The device operates in the RS-232 voltage domain, providing the signal conditioning needed between a host controller and an external data port. The MAX3232CDE4 is a commercial-temperature 0 °C to 70 °C component in a 16-SOIC package. Texas Instruments identifies MAX3232E as an improved direct drop-in replacement for MAX3232, although the package and suffix must be checked before substituting a specific ordering code. Charge-pump capacitors and local bypass capacitance are part of the recommended application circuit and require careful placement near the associated pins. Typical uses include industrial control links, configuration interfaces, test equipment, data acquisition systems, maintenance ports, and embedded-control boards that retain an RS-232 connection. At 250 kbps, it is appropriate for moderate-speed serial links rather than high-speed differential buses. The single positive supply also simplifies integration where a negative rail is unavailable. When laying out the circuit, place charge-pump and supply-bypass capacitors close to their designated pins and keep the RS-232 driver outputs away from sensitive receiver inputs. Confirm logic levels, connector protection, cable length, and grounding because those system details determine whether the transceiver's electrical specifications translate into reliable field operation. This page combines the device's electrical limits, package details, interface standards, lifecycle information, compatible replacements, and practical layout guidance to support component selection and board-level implementation.

RFQ Contact
MAX3232CDG4 - 3V Dual RS-232 Transceiver | Texas Instruments
MAX3232CDG4

MAX3232CDG4 - 3V Dual RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3232CDG4 is a dual RS-232 line-driver and line-receiver transceiver with two drivers, two receivers, a 3 V to 5.5 V supply range, and operation up to 250 kbit/s in a 16-pin SOIC package. The device provides ±15 kV electrostatic-discharge protection and is designed for compatibility with TIA/EIA-232-F and ITU V.28 interfaces. Its integrated charge-pump circuitry creates the positive and negative voltage levels required by RS-232 from a single low-voltage supply. An RS-232 transceiver is an interface IC that converts between digital logic-level signals and the bipolar voltage levels used by RS-232 equipment. This device sits between a UART, microcontroller, or other host controller and a serial connector. Within the semiconductor hierarchy, the MAX3232CDG4 is an interface IC, a line transceiver, and a dual charge-pump RS-232 transceiver designed for reliable point-to-point serial links. Key features include two transmit channels, two receive channels, low-power operation, a maximum data rate of 250 kbit/s, and a single 3 V to 5.5 V supply. Four external 0.1 µF capacitors support the charge-pump and supply functions. The 16-SOIC package is suitable for conventional surface-mount PCB assembly, while the C-grade version is intended for commercial-temperature operation from 0 °C to 70 °C. The MAX3232 family includes the MAX3232E, which Texas Instruments describes as an improved direct drop-in replacement for the original MAX3232. The E variant offers a useful upgrade path for new designs, but engineers must verify the complete pinout, electrical limits, capacitor requirements, and operating-temperature range of the exact orderable suffix before replacing a populated board. Typical uses include industrial serial consoles, point-of-sale equipment, data-acquisition controllers, instrumentation, and legacy peripheral interfaces that use an RS-232 port but operate from a modern 3.3 V or 5 V logic supply. The transceiver is especially useful where a UART needs true RS-232 electrical levels rather than TTL-level signaling. For layout, place the required charge-pump capacitors close to their associated pins and route the RS-232 driver outputs and receiver inputs away from sensitive clock, reset, and analog signals. Confirm that the host UART logic voltage matches the receiver threshold and driver interface requirements. A common mistake is treating RS-232 as a differential or ground-referenced logic standard; it uses a single-ended bipolar signal referenced to the common ground connection. This product page combines manufacturer specifications, package details, lifecycle considerations, drop-in alternatives, and application-specific design guidance. It supports faster component selection while keeping the electrical and mechanical checks needed for a safe PCB substitution.

RFQ Contact
MAX3232CDRE4 - Dual 250kbps RS-232 Transceiver | Texas Instruments
MAX3232CDRE4

MAX3232CDRE4 - Dual 250kbps RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3232CDRE4 is a dual-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply, with a maximum data rate of 250 kbps and ±15 kV ESD protection. The device is packaged in a 16-pin SOIC. It integrates two RS-232 drivers and two receivers, allowing one IC to support a complete two-channel asynchronous serial interface while reducing board area and external wiring. An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 voltage levels and converts received RS-232 signals back into logic-compatible levels. In the broader hierarchy, it is a transceiver within the interface IC category and a physical-layer device for point-to-point serial communication. The MAX3232 is designed for equipment that must communicate with legacy RS-232 ports, industrial controllers, service equipment, and computer peripherals. Key features include a 3 V to 5.5 V operating supply, two driver channels, two receiver channels, data rates up to 250 kbps, and ±15 kV ESD protection. The wide 3 V supply range supports both 3.3 V and 5 V system rails. The integrated dual-channel architecture is particularly useful for ports carrying two independent RS-232 signals or for paired transmit and receive paths in control and diagnostic equipment. The MAX3232 family uses charge-pump circuitry to generate the positive and negative RS-232 voltage levels required by the drivers. This internal approach allows operation from a single low-voltage supply, avoiding a separate bipolar power source. Its 250 kbps maximum signaling rate is suitable for many control, instrumentation, and legacy peripheral interfaces, although cable length, baud rate, capacitance, grounding, and signal integrity can limit practical communication distance. Typical applications include industrial serial controllers, programmable instrumentation, test equipment, POS systems, service interfaces, and embedded systems that retain an RS-232 connection. The device is also useful in modern mixed-signal products where an external legacy device requires RS-232 but the main logic operates from a 3.3 V supply. When laying out the circuit, follow the charge-pump capacitor and input/output capacitor recommendations in the manufacturer datasheet. Place the associated capacitors close to their designated pins, provide a low-impedance ground connection, and route driver outputs away from sensitive receiver inputs to reduce coupling and false triggering. This page combines the MAX3232CDRE4 operating characteristics, verified document links, application guidance, package information, and drop-in alternatives. It is intended to help engineers evaluate electrical fit, board compatibility, and design integration before making a component-selection decision.

RFQ Contact
MAX3232CDRG4 - Dual RS-232 Transceiver | Texas Instruments
MAX3232CDRG4

MAX3232CDRG4 - Dual RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3232CDRG4 is a 3 V to 5.5 V dual RS-232 line driver and receiver transceiver with two drivers, two receivers, full-duplex operation, and ±15 kV ESD protection in a 16-pin SOIC package. The device operates at data rates up to 1 Mbit/s and uses four external 0.1 µF charge-pump capacitors. Its 3.3 V-compatible supply range makes it suitable for modern serial interfaces. An RS-232 transceiver is an interface IC that converts logic-level signals from a host, controller, or embedded processor into RS-232 line levels, while receiving and converting RS-232 signals back into CMOS-compatible logic. In the broader semiconductor hierarchy, this product belongs to the interface IC family, specifically the RS-232 line-driver and receiver category used to bridge modern digital logic with legacy and industrial serial ports. The principal features of the MAX3232CDRG4 include a 3 V to 5.5 V operating range, two transmit channels, two receive channels, full-duplex operation, and ±15 kV ESD protection. It supports communication rates up to 1 Mbit/s, while its low-power design uses four external 0.1 µF capacitors for the internal charge-pump circuitry. The 16-SOIC package provides a conventional surface-mount form factor for industrial and embedded equipment. Operationally, the integrated charge pump generates the positive and negative voltage levels required by RS-232 drivers. The receiver section converts incoming differential line voltages into CMOS-compatible outputs, while the transmitter section converts CMOS-compatible inputs into RS-232 levels. This architecture allows a controller with a UART to communicate with a PC, peripheral, instrument, or another RS-232-equipped system without implementing the level-shifting interface externally. Typical applications include industrial serial consoles, data-acquisition equipment, barcode and identification systems, instrumentation, point-of-sale terminals, and embedded control systems. The 1 Mbit/s capability supports high-speed point-to-point links, while ±15 kV ESD protection improves robustness where cables can be exposed to electrostatic discharge. When designing the circuit, place all four 0.1 µF charge-pump capacitors close to their associated device pins and follow the manufacturer datasheet layout and polarity markings. Confirm signal levels, ground continuity, and connector exposure in the final system; the ESD rating does not replace appropriate cable and enclosure design. This product page organizes the operating limits, package information, technical applications, and verified drop-in alternatives for engineers evaluating the MAX3232CDRG4. It also provides practical guidance on capacitor placement, interface robustness, and the distinctions between electrically similar RS-232 transceivers.

RFQ Contact
MAX3232CDW - 250kbps Dual RS-232 Transceiver | TI
MAX3232CDW

MAX3232CDW - 250kbps Dual RS-232 Transceiver | TI

The Texas Instruments MAX3232CDW is a dual RS-232 line driver and receiver transceiver operating from a 3 V to 5.5 V supply, supporting data rates up to 250 kbit/s and providing ±15 kV ESD protection in a 16-pin SOIC package. The device contains two drivers and two receivers for full-duplex RS-232 links and accepts 5 V logic signals. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line voltages and converts received line voltages back into digital logic levels. It belongs to the interface IC hierarchy, where a transceiver connects a UART or other serial controller to a physical RS-232 port. The MAX3232 also provides level translation between CMOS logic and bipolar RS-232 signaling. Key features include two RS-232 drivers, two RS-232 receivers, operation from a 3 V to 5.5 V supply, and a maximum data rate of 250 kbit/s. Its typical supply current is 300 µA, helping minimize power consumption in equipment that maintains an RS-232 port. The specified ±15 kV ESD protection applies to the serial-port terminals, including ground, improving robustness when cables are connected or disconnected. The MAX3232 meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards. It uses external 0.1 µF charge-pump capacitors to generate the positive and negative voltage levels required by RS-232. These capacitors must be placed close to the charge-pump pins because excessive trace resistance and inductance can reduce driver output performance or disrupt startup. Typical applications include industrial serial controllers, point-of-sale terminals, data acquisition equipment, test systems, and legacy peripheral connections. The dual-channel arrangement allows one port to transmit and receive simultaneously, while dual transceivers can support two complete RS-232 ports when additional multiplexers or connectors are used. The 16-pin SOIC package also simplifies assembly in conventional surface-mount industrial and commercial equipment. The primary design consideration is maintaining the exact capacitor values and placement specified by the manufacturer datasheet. Designers should also account for RS-232's unbalanced signaling, use suitable protection around external connectors, and avoid interpreting the ±15 kV ESD rating as immunity to every surge or ESD event. This page combines verified technical specifications, sourcing information, drop-in alternatives, and practical integration guidance.

RFQ Contact
MAX3232CDWG4 - Dual RS-232 Transceiver | Texas Instruments
MAX3232CDWG4

MAX3232CDWG4 - Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3232CDWG4 is a dual RS-232 line driver and receiver transceiver rated for 3 V to 5.5 V supply operation, 250 kbit/s data rates, and ±15 kV human-body-model ESD protection. The device is packaged in a 16-pin SOIC with a commercial operating-temperature grade of 0°C to 70°C. Its two drivers and two receivers support point-to-point RS-232 links where logic-level equipment must connect to a larger ground-referenced serial interface. An RS-232 transceiver is an interface IC that bridges the voltage-domain difference between CMOS or other digital logic and the bipolar signal levels used by RS-232 equipment. Within the interface hierarchy, the MAX3232CDWG4 is a multichannel line transceiver containing RS-232 line drivers, RS-232 receivers, and a dual charge-pump power supply. That internal hierarchy also explains why four external 0.1 µF capacitors are used to generate the required positive and negative RS-232 voltage levels. The principal benefits are operation from a single 3 V to 5.5 V supply, two transmit channels, two receive channels, a maximum data rate of 250 kbit/s, and ±15 kV HBM ESD protection. The MAX3232 family meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 as identified in the device documentation. These characteristics make the part suitable for industrial control, instrumentation, POS equipment, and embedded serial-port designs. Technically, the charge-pump circuitry converts the single positive supply into the voltage swings required by RS-232 drivers. The receiver side detects differential bipolar inputs and translates them into CMOS-compatible logic levels. The MAX3232CDWG4 is a commercial-temperature option, while the MAX3232E family is identified by Texas Instruments as an improved direct replacement for MAX3232 in new designs. Circuit designers should nevertheless compare device-specific enable, fail-safe, and power-control behavior before approving a substitute. Typical uses include connecting an embedded controller to a legacy printer, barcode reader, test instrument, or industrial peripheral over a full-duplex RS-232 link. The 16-pin SOIC package is also practical for designs that already use surface-mount assembly and can accommodate the external charge-pump capacitor network. Because the line interface is not a differential CAN or RS-485 bus, the interconnect should be implemented as a point-to-point RS-232 connection with the required signal-ground reference. A key design consideration is capacitor placement. Position the four 0.1 µF charge-pump capacitors close to their associated device pins, with the shortest possible ground-return paths. Protect exposed connector-side pins against electrostatic discharge, provide a stable ground reference, and route the RS-232 cable away from sensitive analog and high-speed digital traces. This product page consolidates the device specifications, verified sourcing links, drop-in comparison information, application guidance, and practical layout considerations into one engineering-focused reference. It helps distinguish electrical equivalents from mechanically similar parts and highlights the checks required before reusing an existing 16-pin SOIC layout.

RFQ Contact
MAX3232CDWRE4 - 250 kbit/s Dual RS-232 | Texas Instruments
MAX3232CDWRE4

MAX3232CDWRE4 - 250 kbit/s Dual RS-232 | Texas Instruments

The Texas Instruments MAX3232CDWRE4 is a 3 V to 5.5 V dual RS-232 line driver and receiver supporting two transmit and two receive channels at speeds up to 250 kbit/s. The device is packaged in a 16-pin SOIC (DW) and uses external 0.1 µF charge-pump capacitors to generate the RS-232 bipolar voltage levels required for reliable serial communication. An RS-232 transceiver is an interface IC that converts logic-level signals into voltage levels suitable for RS-232 links and then restores received RS-232 signals to logic levels. Within the interface hierarchy, the MAX3232CDWRE4 belongs to the RS-232 transceiver class of interface ICs, where it bridges a host UART or processor and an external data link. Its dual-channel architecture supports full-duplex point-to-point communication over two driver and two receiver channels. Key features include operation from a 3 V to 5.5 V supply, support for 5 V logic, a data rate up to 250 kbit/s, and a typical supply current of 300 µA. The MAX3232 family meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28. These characteristics make it suitable for industrial-control links, configuration ports, test equipment, and embedded systems that require a compact RS-232 interface without a separate charge-pump supply. The device uses an internal charge-pump voltage converter with externally connected capacitors. These capacitors establish the positive and negative voltage rails required to drive RS-232 signals beyond ordinary 3.3 V or 5 V logic levels. The low supply current is particularly useful in systems where the serial interface remains enabled but carries infrequent traffic, because the transceiver can be placed in a power-saving state without removing the entire host from operation. Typical applications include programmable instrument control, industrial equipment interfaces, point-of-sale terminals, service-console connections, and embedded debug or configuration ports. The dual receiver arrangement also permits a single transceiver to handle two independent incoming channels, while the dual driver arrangement supports two outgoing channels. System designers should still account for the slower and more noise-sensitive characteristics of RS-232 compared with differential interfaces such as RS-422 or RS-485. For PCB implementation, place the charge-pump capacitors close to their designated pins and maintain the layout and grounding practices shown in the manufacturer datasheet. Keep the communication traces short where possible, provide a solid ground reference, and use suitable protection for externally accessible connectors. The main engineering trade-off is that the charge-pump design adds external capacitors and does not offer the noise immunity or multi-drop capability of a differential RS-485 interface. This page organizes the principal electrical characteristics, package information, verified source links, drop-in alternatives, application guidance, and design considerations needed to evaluate the MAX3232CDWRE4 for a new RS-232 interface. It also highlights where temperature-grade, logic-interface, or channel-count differences can affect replacement decisions.

RFQ Contact
MAX3232CDWRG4 - Dual 250kbps RS-232 Transceiver | Texas Instruments
MAX3232CDWRG4

MAX3232CDWRG4 - Dual 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3232CDWRG4 is a dual-channel RS-232 line driver and receiver operating from 3 V to 5.5 V at data rates up to 250 kbps, with ±15 kV ESD protection, in a 16-pin SOIC package. The device combines two RS-232 drivers, two receivers, and an on-chip charge-pump supply in one compact interface circuit. Its commercial temperature grade supports operation from 0°C to 70°C. An RS-232 transceiver is an interface IC that converts low-voltage digital logic signals into RS-232 voltage levels and converts incoming RS-232 levels back into logic-compatible signals. Within the electronics hierarchy, the MAX3232 belongs to the interface IC family, where line drivers and receivers bridge computer or embedded-system logic with a differential, bipolar signaling interface. It is designed for point-to-point serial links where the full RS-232 voltage range, noise tolerance, and ESD resilience are more important than low-voltage logic-only communication. The MAX3232 family supports 3 V and 5 V supply operation, allowing use with modern 3.3 V systems as well as conventional 5 V equipment. Its maximum signaling rate of 250 kbps supports data-transfer rates commonly required by serial console, instrumentation, and industrial-control interfaces. The integrated charge pump generates the positive and negative voltages required by RS-232 transmitters without a separate negative supply, while ±15 kV human-body-model ESD protection improves robustness at externally accessible connector pins. The receiver section uses approximately 300 mV of hysteresis to distinguish valid logic states in the presence of noise. This threshold helps prevent repeated transitions near the signal threshold, which can otherwise cause corrupted characters or erratic framing. The two-channel arrangement provides one full-duplex path per channel, allowing simultaneous transmission and reception on each RS-232 link when the connected equipment and protocol support that direction of traffic. Typical uses include industrial serial consoles, test and measurement equipment, point-of-sale terminals, data-acquisition systems, and embedded-control boards. The device is particularly appropriate where equipment uses DB9 or equivalent RS-232 connectors and needs a compact interface solution operating from a single 3 V or 5 V rail. Its ±15 kV ESD rating is especially relevant where the serial cable leaves an enclosure or connects to user-accessible equipment. Designers should follow the manufacturer datasheet for the exact charge-pump capacitor values, driver and receiver pin assignments, and recommended layout. Keep the external capacitor connections short, provide a stable supply-decoupling path, and route the driver outputs toward the connector while separating them from sensitive receiver inputs. Do not treat ±15 kV ESD protection as a substitute for enclosure grounding, cable shielding, or external surge protection. This product page combines the manufacturer's electrical specifications with an application-focused comparison of temperature grades, package compatibility, interface alternatives, and practical PCB considerations. It also distinguishes direct replacement options from broader RS-232 transceiver families, helping engineers confirm footprint, logic-level, speed, and protection requirements before approving a substitution.

RFQ Contact
MAX3232CPE+ - 3.0V to 5.5V Dual RS-232 Transceiver | Maxim Integrated
MAX3232CPE+

MAX3232CPE+ - 3.0V to 5.5V Dual RS-232 Transceiver | Maxim Integrated

The Maxim Integrated MAX3232CPE+ is a 3.0V to 5.5V, low-power, full RS-232 transceiver with two drivers and two receivers, data rates up to 1 Mbps, and a 16-pin PDIP package. The MAX3232CPE+ converts TTL/CMOS logic levels to and from true RS-232 levels, making it suitable for serial equipment, industrial control, and legacy PC communication. An RS-232 transceiver is an interface IC that bridges the voltage-domain difference between digital logic and the bipolar, noise-tolerant RS-232 standard. MAX3232 belongs to the RS-232 transceiver hierarchy, which sits above interface ICs and semiconductor devices. Its dual charge-pump design generates the positive and negative voltages required by true RS-232 while operating from a single low-voltage supply. The key verified features include a 3.0V minimum and 5.5V maximum supply range, operation up to 1 Mbps, two drivers and two receivers, true RS-232 operation, and four external 0.1 uF charge-pump capacitors. The MAX3232CPE+ is identified by distributors as a 16-PDIP through-hole device. One distributor result also associates the family with low-power operation, making it suitable for portable and embedded systems where supply current and board area matter. The device uses a dual charge-pump architecture with a proprietary low-dropout transmitter output stage. This architecture provides true RS-232 output levels from a single 3.0V to 5.5V supply. The required charge-pump capacitors should be placed close to their associated pins, and the external capacitor values should follow the manufacturer datasheet rather than general-purpose substitution assumptions. Typical applications include RS-232 adapters, industrial serial controllers, test equipment, POS terminals, embedded debug ports, and communication links to legacy computers or peripherals. The two-driver, two-receiver arrangement supports bidirectional point-to-point serial links when paired with the appropriate line-side protection and connector design. When designing a board, reserve a dedicated 16-pin PDIP footprint, route the charge-pump network close to the IC, and keep RS-232 traces away from sensitive analog or high-speed digital signals. Add appropriate transient protection according to the cable length and exposure to industrial transients; the supplied data does not specify an external protection component, so protection selection remains a board-level design decision. This page combines distributor pricing, verified electrical facts, source links, and engineering-oriented design guidance for engineers evaluating MAX3232CPE+ procurement and implementation.

RFQ Contact
MAX3232CPWE4 2/2 RS-232 Transceiver, 16-TSSOP | Texas Instruments
MAX3232CPWE4

MAX3232CPWE4 2/2 RS-232 Transceiver, 16-TSSOP | Texas Instruments

Texas Instruments MAX3232CPWE4 is a 2/2 RS-232 line transceiver with a 3 V to 5.5 V supply, operation up to 250 kbit/s, and a 16-pin TSSOP package. It combines two RS-232 drivers and two receivers on one IC, making it suitable for compact bidirectional serial interfaces. The MAX3232 family uses charge-pump voltage conversion to generate the RS-232 level-shift voltages required by a single low-voltage supply. An RS-232 transceiver is an interface IC that bridges logic-level signals and the voltage ranges used by RS-232 links. The line-driver section converts low-voltage logic signals into RS-232 levels, while the receiver section converts incoming RS-232 signals into CMOS-compatible logic. Within the broader hierarchy, this device is a physical-layer interface IC, a multichannel line transceiver, and a semiconductor for data communications and industrial-control equipment. The main operating characteristics are a 3 V to 5.5 V single-supply range, two drivers, two receivers, and data rates up to 250 kbit/s. The manufacturer datasheet also identifies ±15 kV human-body-model ESD protection. These characteristics make the device useful where legacy RS-232 equipment must coexist with low-voltage UART, microcontrollers, industrial controllers, and service equipment. The MAX3232 architecture supports operation from a supply as low as 3 V without requiring a separate 12 V RS-232 supply. Internal charge-pump circuitry develops the bipolar voltage needed by the drivers, while the receiver inputs include ESD protection. This integration simplifies board design while retaining the signaling behavior required by TIA/EIA-232-F and ITU V.28 applications described for the device. Typical uses include service-console connections, configuration interfaces on industrial equipment, point-of-sale terminals, security systems, and instrumentation. Two channels can support simultaneous transmit and receive activity, while dual receiver channels are useful for systems requiring one transmit line and two receive lines or a second unidirectional channel. When laying out the circuit, keep charge-pump and interface-capacitor connections short, provide the required supply and bypass capacitance, and route connector-side signals away from sensitive logic. Confirm pin availability, input and output logic levels, and RS-232 lead lengths against the manufacturer pin-description table before finalizing a PCB footprint. This product page combines the exact ordering information, electrical limits, package data, qualified alternatives, comparison parameters, and practical interface-layout guidance needed to evaluate the MAX3232CPWE4 as a drop-in candidate for an existing 16-pin TSSOP design.

RFQ Contact
MAX3232CPWG4 - 2/2 RS-232 Transceiver, 3-5.5V | TI
MAX3232CPWG4

MAX3232CPWG4 - 2/2 RS-232 Transceiver, 3-5.5V | TI

The Texas Instruments MAX3232CPWG4 is a 2-driver, 2-receiver RS-232 transceiver designed for 3 V to 5.5 V operation, with a maximum data rate of 250 kbit/s and ±15 kV ESD protection. The device is packaged in a 16-pin TSSOP and uses a dual charge-pump architecture to generate the bipolar voltage levels required by RS-232 line drivers. An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232-compatible line levels and converts incoming RS-232 signals back into logic levels. It belongs to the interface IC hierarchy and is commonly placed between a host UART connector and an external data-processing or communications device. The MAX3232 family supports both 3.3 V and 5 V system rails, making it useful in industrial controllers, embedded systems, test equipment, and legacy serial-port designs. Key features include two RS-232 drivers, two RS-232 receivers, a 3 V to 5.5 V supply range, operation up to 250 kbit/s, and ±15 kV ESD protection on the serial-port connections. The 16-pin TSSOP package reduces board area compared with larger SOIC options, while the integrated charge pump eliminates the need for a separate RS-232 line-voltage supply. Four external 0.1 µF charge-pump capacitors are required for normal operation. Technically, the MAX3232CPWG4 combines a dual charge-pump circuit with push-pull line drivers and receiver inputs. The charge pump develops positive and negative rails internally, allowing the drivers to produce compliant RS-232 levels from a single low-voltage supply. The receiver stage supports reliable detection of the RS-232 logic states, while the transceiver architecture supports both transmit and receive paths on the same device. Typical applications include industrial serial adapters, embedded instrumentation, programmable-logic-controller interfaces, barcode and label equipment, board-to-board serial links, and test or measurement systems that retain an RS-232 port. In these systems, the device provides level translation while reducing the number of external power rails and supporting compact, high-speed serial communication. For PCB design, place the four 0.1 µF charge-pump capacitors close to their associated C1+, C1−, C2+, and C2− pins, and route the RS-232 connector signals with return-path awareness. Because ESD events occur at externally accessible connectors, maintain a short ground path and consider additional board-level protection when cables are long or the equipment is used in severe industrial environments. This product page combines the manufacturer's device data with practical application guidance, package information, replacement analysis, and design notes. It is intended to help engineers evaluate the MAX3232CPWG4 quickly while preserving the electrical and layout checks required for a dependable RS-232 interface.

RFQ Contact
MAX3232CPWR - 250kbps Dual RS-232 Transceiver | TI
MAX3232CPWR

MAX3232CPWR - 250kbps Dual RS-232 Transceiver | TI

The Texas Instruments MAX3232CPWR is a dual-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V single supply, with data rates up to 250 kbit/s and ±15-kV ESD protection. It is packaged in a 16-pin TSSOP (PW) surface-mount package. The device provides two transmit channels and two receive channels for bidirectional serial-interface conversion between TTL/CMOS logic and RS-232 levels. An RS-232 transceiver is an interface IC that translates low-voltage digital logic signals into differential bipolar voltage levels used by RS-232 equipment. The MAX3232CPWR is designed for asynchronous serial communication and uses external capacitors for its charge-pump voltage conversion, avoiding an external power supply while supporting 3 V, 3.3 V, and 5 V systems. Its dual-channel architecture suits equipment with two serial ports, point-to-point links, industrial controllers, and embedded systems requiring robust line-side protection. Key features include 250 kbit/s operation, two drivers, two receivers, low typical supply current of 300 µA, 5-V logic compatibility, and ±15-kV ESD protection. The MAX3232 family meets or exceeds TIA/EIA-232-F and ITU V.28 requirements, as stated in the manufacturer datasheet. The PW package supports compact PCB layouts, while the device’s low-voltage supply range makes it suitable for modern embedded systems. The dual charge-pump architecture generates the positive and negative voltage levels required by RS-232 drivers. External capacitors are connected to the charge-pump pins, and the supply decoupling network should follow the datasheet layout. The MAX3232CPWR is a practical choice where a system needs two RS-232 channels without a separate negative power rail. Typical uses include industrial control equipment, data acquisition systems, test and measurement instruments, USB-to-RS-232 adapters, point-of-sale terminals, and embedded serial bridges. The device is also appropriate for systems requiring robust protection when the cable may be exposed to electrostatic discharge events. When laying out a MAX3232CPWR circuit, place charge-pump capacitors and supply decoupling capacitors close to their associated pins, keep the RS-232 traces away from sensitive analog or high-speed digital paths, and verify the external capacitor values against the manufacturer datasheet. The ±15-kV ESD rating does not eliminate the need for good connector protection and cable routing. This page combines verified manufacturer specifications, pricing context, cross-reference alternatives, application guidance, and practical PCB recommendations for engineers evaluating the MAX3232CPWR.

RFQ Contact
MAX3232CPWRE4 - 3-5.5V RS-232 Transceiver | Texas Instruments
MAX3232CPWRE4

MAX3232CPWRE4 - 3-5.5V RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3232CPWRE4 is a dual-channel RS-232 line driver and receiver designed for 3 V to 5.5 V supply operation, with a 250 kbps data rate and ±15 kV ESD protection. The device is supplied in a 16-pin TSSOP package and supports both transmit and receive functions for industrial, embedded, and data-communication equipment. An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the voltage levels used by RS-232 ports. The MAX3232 family integrates two drivers and two receivers, allowing a UART or other communications controller to connect to an RS-232 connector. The 3 V to 5.5 V operating range makes the device suitable for systems using either 3.3 V or 5 V logic supplies. The MAX3232CPWRE4 provides a 250 kbps RS-232 line rate and ±15 kV ESD protection according to the manufacturer product page. These characteristics are important in equipment where a communications port may be exposed to electrostatic discharge from cables, connectors, or nearby personnel. The device is identified in distributor listings as a 2/2 full RS-232 transceiver in a 16-pin TSSOP package. The MAX3232 family is intended for applications requiring bidirectional serial communication, including point-of-sale terminals, industrial control panels, test equipment, instrumentation, and embedded serial-port interfaces. Its dual-channel arrangement allows two transmit and two receive functions on one device, reducing the number of interface ICs required on a board. The commercial MAX3232CPWRE4 ordering code uses the 16-terminal TSSOP format and is associated with the commercial temperature grade. The E suffix in the ordering code identifies the tube packaging format for the package code, while the R suffix identifies the standard commercial temperature range. Confirm the exact ordering information, package dimensions, electrical limits, and operating temperature limits against the current manufacturer datasheet and product page before releasing a production BOM. For robust implementation, place the charge-pump capacitors and receiver or driver interface components close to the device and keep RS-232 traces away from sensitive analog and clock paths. The external charge-pump capacitors are part of the MAX3232 operating circuit, and their values and placement should follow the manufacturer datasheet layout guidance. This page combines manufacturer specifications, distributor identification, drop-in cross-references, and application-specific design guidance for engineers evaluating the MAX3232CPWRE4.

RFQ Contact
MAX3232CPWRG4 - 250 kbps Dual RS-232 Transceiver, 3-5.5 V, 16-TSSOP | Texas Instruments
MAX3232CPWRG4

MAX3232CPWRG4 - 250 kbps Dual RS-232 Transceiver, 3-5.5 V, 16-TSSOP | Texas Instruments

Texas Instruments MAX3232CPWRG4 is a dual-channel RS-232 line driver/receiver (transceiver) integrated circuit containing two line drivers and two line receivers, a dual charge-pump circuit with plus or minus 15 kV ESD protection, a 3 V to 5.5 V single supply, and a maximum data rate of 250 kbps, all in a 16-pin TSSOP (PW) package. An RS-232 transceiver is the interface bridge between a modern CMOS/TTL microcontroller or host UART and the legacy plus or minus 5 V to plus or minus 15 V signalling world of the RS-232 standard. In the knowledge hierarchy it sits as RS-232 transceiver, then line driver and line receiver, then interface IC, then integrated circuit. The MAX3232 is a classic multi-channel RS-232 interface IC used wherever a system must talk to a serial port, console, or legacy peripheral over a cable. Key features of the MAX3232 device include the on-chip dual charge-pump circuit that generates the positive and negative RS-232 voltage levels from a single 3 V to 5.5 V supply, plus or minus 15 kV ESD protection on the serial-port connection terminals including ground, and compliance with the requirements of TIA/EIA-232-F. Because both the charge pump and the level translation are integrated, no external negative rail or level shifter is required in the design. Architecturally the device separates transmit and receive pins cleanly, with two dedicated driver outputs and two dedicated receiver inputs plus the enable pins for each channel, so each direction can be shut down independently to reduce supply current when the port is idle. The charge-pump section requires four external flying capacitors connected to the C1+, C1-, C2+ and C2- pins, which the manufacturer shows in the typical application circuit of the MAX3232 datasheet. Typical applications include RS-232 console and debug ports on industrial equipment, point-of-sale terminals, serial bridges and protocol converters, test and measurement instrument front panels, and legacy DB9 or RJ45 serial connections to host computers and microcontrollers. The 16-pin TSSOP footprint keeps the design compact and is the standard footprint for this family in surface-mount production. When laying out a board, keep the four charge-pump capacitors physically close to their respective pins and route the RS-232 connector side of the circuit away from sensitive analog or high-speed digital traces, since the driver outputs are high-voltage, high-slew-rate signals relative to the logic side of the board. This page consolidates manufacturer specifications, a drop-in alternative matrix, comparison parameters and practical layout guidance for engineers who need to source, qualify or replace the MAX3232CPWRG4 without re-laying-out their RS-232 interface board.

RFQ Contact
MAX3232CSE+T - 1Mbps RS-232 Transceiver | Analog Devices
MAX3232CSE+T

MAX3232CSE+T - 1Mbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3232CSE+T is a 3.0V to 5.5V, low-power, true RS-232 transceiver that supports data rates up to 1Mbps and is packaged in a 16-pin SOIC. It provides two transmit channels and two receive channels, making it suitable for compact serial-console, industrial-control, instrumentation, and point-to-point data links. A true RS-232 transceiver is an interface circuit that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic. The MAX3232 combines receiver and driver functions in one package, using a dual charge-pump arrangement to generate the bipolar voltage required by true RS-232 operation. This places it within the hierarchy of interface ICs, transceiver ICs, communication interfaces, and semiconductors. The MAX3232CSE+T operates from 3.0V to 5.5V and supports signaling rates as high as 1Mbps. According to the Analog Devices MAX3232 manufacturer datasheet, the family is designed for low-power operation and true RS-232 performance, including operation from a supply below the traditional 5V-only operating regime. The integrated charge pumps allow the device to operate without an external negative supply rail. The MAX3232CSE+T uses four small external 0.1µF charge-pump capacitors, as described by the manufacturer data sheet. Its transmitter implementation supports low-power operation while maintaining compliant RS-232 output levels. The two-driver, two-receiver organization permits one link to carry command or control information in each direction, although driver and receiver enable functions depend on the exact family configuration documented in the manufacturer data sheet. Typical uses include RS-232 service ports, programmable-instrument interfaces, industrial controllers, laboratory equipment, and embedded systems that need a compact dual-channel RS-232 connection. The 16-pin SOIC package supports conventional surface-mount assembly and is narrower than a standard through-hole DB-25 connector footprint. PCB layout should preserve short charge-pump capacitor connections and provide adequate return paths for the high-voltage driver outputs. Designers should use the manufacturer pin-description table when assigning tracks because exact ENABLE, VCC, ground, and charge-pump connectivity must follow the package orientation. Input and output protection should be added where cables can exceed the device's rated RS-232 voltage. This page combines the manufacturer's operating limits, package information, replacement analysis, and application guidance to support design and sourcing decisions.

RFQ Contact
MAX3232CSE+TG1Z - 1Mbps Dual RS-232 Transceiver | Analog Devices
MAX3232CSE+TG1Z

MAX3232CSE+TG1Z - 1Mbps Dual RS-232 Transceiver | Analog Devices

The Analog Devices MAX3232CSE+TG1Z is a dual transmitter and dual receiver RS-232 transceiver designed for 3.0V to 5.5V single-supply operation, with data rates up to 1Mbps in a 16-pin SOIC package. The integrated interface translates logic-level UART signals into true RS-232 levels and converts incoming RS-232 signals back to CMOS/TTL-compatible logic levels. An RS-232 transceiver is a communications interface IC used to connect a modern microcontroller, programmable logic controller, or computer serial port with equipment that uses the RS-232 standard. The MAX3232 belongs to the broader line-driver and receiver hierarchy, combines two RS-232 drivers with two receivers, and eliminates the need for a separate negative supply. Its true RS-232 implementation also supports low-power portable equipment connected to external data and control systems. The MAX3232CSE+TG1Z operates from a 3.0V to 5.5V supply and supports communication rates up to 1Mbps. It uses four 0.1uF charge-pump capacitors to generate the voltage levels required by true RS-232 transmitters. The manufacturer describes the MAX3232 family as pin, package, and functionally compatible with industry-standard RS-232 interfaces, which simplifies design reuse when the electrical requirements and operating conditions match. Its dual-channel architecture allows one serial link to carry data in both directions or supports two independent unidirectional links. Logic-side signals connect directly to a UART controller, while the driver outputs and receiver inputs connect to the external RS-232 connector. The 16-pin SOIC package is suitable for conventional surface-mount PCB assembly, although connector protection, grounding, and signal-integrity practices remain necessary in industrial environments. Typical uses include industrial serial controllers, programmable logic controller communication ports, data-acquisition equipment, point-of-sale terminals, and service interfaces for embedded systems. A dual-driver, dual-receiver arrangement is particularly useful when a board must exchange commands and status data with a single RS-232 port or interface two separate RS-232 links. Design the circuit around the manufacturer's recommended 0.1uF charge-pump capacitor network and observe polarity and routing requirements shown in the MAX3232 data sheet. Keep sensitive receiver traces away from switching nodes and high-current edges, provide a stable ground reference between the logic board and RS-232 equipment, and consider external transient protection for cables longer than a short bench connection. This product overview combines interface specifications, pin-level implementation guidance, application patterns, and verified drop-in alternatives to accelerate component selection and PCB design. It also identifies the electrical and qualification checks that must be completed before substituting one RS-232 transceiver for another.

RFQ Contact
MAX3232CUE+ - 2/2 RS-232 Transceiver, 3.0-5.5V | Maxim Integrated
MAX3232CUE+

MAX3232CUE+ - 2/2 RS-232 Transceiver, 3.0-5.5V | Maxim Integrated

The Maxim Integrated MAX3232CUE+ is a 2-driver, 2-receiver true RS-232 transceiver operating from a 3.0 V to 5.5 V supply at data rates up to 1 Mbps, packaged in a 16-pin TSSOP. It uses a dual charge-pump design with a low-dropout transmitter output stage to generate compliant RS-232 levels from a single low-voltage supply. A true RS-232 transceiver is an interface IC that converts logic-level signals between TTL or CMOS equipment and the voltage-defined RS-232 serial bus. In the signal path hierarchy, it belongs to the RS-232 interface family, which sits between computer serial ports, embedded controllers, industrial equipment, and communications cables. The MAX3232CUE+ supports both transmit and receive paths, making it suitable for bidirectional point-to-point serial links. The principal operating specifications are a 3.0 V to 5.5 V supply range, a maximum data rate of 1 Mbps, and a 16-TSSOP package. The transmitter design includes a low-dropout output stage, while the dual charge-pump circuit supports true RS-232 operation from a single supply. Only four external 0.1 µF charge-pump capacitors are required, simplifying implementation on compact boards. The MAX3232CUE+ is a 2/2 transceiver, meaning it provides two transmit channels and two receive channels. It is intended for low-power, low-voltage systems where traditional RS-232 transceivers would require a higher supply. Its electrical interface is suited to controller UARTs, test equipment, point-of-sale terminals, industrial control panels, and other equipment using serial command or data links. The E temperature designation indicates a 0 °C to 70 °C commercial operating range. The TSSOP package supports surface-mount assembly and is appropriate for compact embedded and industrial-control products. Compared with discrete TTL-to-RS-232 designs, the integrated transceiver also reduces board area and simplifies charge-pump implementation. Design the charge-pump capacitors close to the IC, route transceiver outputs away from sensitive analog signals, and use the manufacturer's pin-description table when assigning PCB tracks. Confirm the exact cable length, ground reference, baud rate, and electrical limits for the target RS-232 port before releasing the production design. This page combines the manufacturer specifications with package, sourcing, application, and replacement guidance. It highlights the MAX3232CUE+ operating envelope, explains its charge-pump implementation, and provides drop-in candidates that require careful electrical and pinout verification before substitution.

RFQ Contact
MAX3232CUE+T - 1Mbps RS-232 Transceiver | Analog Devices
MAX3232CUE+T

MAX3232CUE+T - 1Mbps RS-232 Transceiver | Analog Devices

Analog Devices MAX3232CUE+T is a true RS-232 transceiver with two drivers and two receivers, a maximum data rate of 1 Mbps, and a 3.0 V to 5.5 V supply range. The device is housed in a 16-pin TSSOP package, and the +T suffix identifies the tape-and-reel ordering option. Its dual charge-pump design supports true RS-232 signal levels from a low-voltage supply without requiring a separate 12 V power source. A true RS-232 transceiver is an interface IC that converts logic-level digital signals into bipolar RS-232 levels and converts incoming RS-232 signals back into logic-level outputs. In the electronic-component hierarchy, the MAX3232 belongs to the RS-232 transceiver class, interface IC family, and broader power-management and connectivity ecosystem. It is commonly placed between a host controller with UART logic and an external RS-232 connector. The MAX3232 family supports operation from 3.0 V to 5.5 V and data rates up to 1 Mbps. Four external 0.1 µF charge-pump capacitors provide the voltage conversion needed for true RS-232 output levels. The two-driver, two-receiver configuration permits two serial channels, or one bidirectional channel when driver and receiver pairs are connected appropriately. Low-power operation makes the family suitable for compact industrial, communications, instrumentation, and embedded-control equipment. Internally, the MAX3232 uses charge-pump voltage conversion rather than a transformer or a dedicated negative supply. This architecture simplifies the external power design while preserving the positive and negative voltage swing required by RS-232. The MAX3232 is also identified by Analog Devices as pin, package, and functionally compatible with the industry-standard MAX232, providing a practical migration path for existing RS-232 interfaces. Typical uses include configuration and programming ports, industrial control links, point-of-sale equipment, test and measurement instruments, and embedded systems that exchange serial commands over RS-232. Designers should use the MAX3232CUE+T when a compact surface-mount implementation, single-supply operation, true RS-232 levels, and a 1 Mbps maximum signaling rate are required. The 16-pin TSSOP footprint also permits assembly with standard small-outline SMD equipment. The main design consideration is charge-pump capacitor placement. Place the four required 0.1 µF capacitors close to their associated pins and follow the manufacturer datasheet reference layout to minimize switching noise and maintain stable operation. Account for RS-232 connector protection, ground-return requirements, and cable-length limitations even though the transceiver itself supports a high maximum data rate. This product summary combines manufacturer specifications, ordering information, replacement analysis, pin-and-package constraints, and practical interface-design guidance. It helps engineers compare the MAX3232CUE+T with related low-power RS-232 transceivers while focusing on the same 16-pin TSSOP footprint and the electrical requirements of a working RS-232 link.

RFQ Contact
MAX3232CWE+ - 1 Mbps Dual RS-232 Transceiver | Analog Devices
MAX3232CWE+

MAX3232CWE+ - 1 Mbps Dual RS-232 Transceiver | Analog Devices

The Analog Devices MAX3232CWE+ is a dual RS-232 transceiver containing two drivers and two receivers, operates from 3.0 V to 5.5 V, and supports data rates up to 1 Mbps in a 16-pin SOIC package. Its low-power design operates from a single supply without requiring a separate negative voltage rail. A transceiver combines the two functional blocks required at one end of an RS-232 link. A driver converts logic-level signals into RS-232 levels, while a receiver converts incoming RS-232 signals back into logic levels. As a true RS-232 interface IC, the MAX3232CWE+ belongs to the interface IC hierarchy alongside line drivers, line receivers, and level-translation devices used in serial communications. The MAX3232 family uses a dual charge-pump arrangement to generate the bipolar voltage needed for RS-232 transmission while operating from a 3.0 V to 5.5 V supply. The manufacturer product page identifies the MAX3232 as a low-power true RS-232 transceiver with operation up to 1 Mbps. Charge-pump operation eliminates the need for a separate negative supply in equipment that cannot provide the traditional plus-or-minus 12 V RS-232 voltage range. Analog Devices states that the MAX3232 is pin, package, and functionally compatible with the industry-standard MAX232. The MAX3232 family is suitable for replacing MAX232 designs when a modern low-power implementation is required. The device also supports shutdown operation, which can reduce supply current when the associated communications port is inactive. Its dual-channel arrangement allows two serial ports or two signal directions to share one interface IC. Typical uses include data acquisition systems, industrial control links, point-of-sale equipment, instrument consoles, and embedded serial communications. The 1 Mbps capability is useful for links that exceed the slower rates of conventional RS-232 transceivers. Because cable length, driver slew rate, receiver threshold, and system grounding strongly influence practical RS-232 performance, PCB layout and external charge-pump capacitors require close attention. Place the four 0.1 µF charge-pump capacitors close to their associated pins and route the driver outputs and receiver inputs away from sensitive logic. Confirm that the host interface uses the correct logic levels and that unused receiver outputs are handled according to the manufacturer's pin-description table. This page also organizes compatible family options, comparison parameters, and practical PCB guidance for evaluating the MAX3232CWE+ in new and replacement designs.

RFQ Contact
MAX3232CWE+T - 3V-5.5V 1Mbps RS-232 Transceiver | Analog Devices
MAX3232CWE+T

MAX3232CWE+T - 3V-5.5V 1Mbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3232CWE+T is a low-power, true RS-232 transceiver integrated circuit with two transmitters and two receivers, designed for 3.0V to 5.5V operation and data rates up to 1Mbps. The device uses a 16-pin SOIC package and is identified as a production part in the MAX3232 product family. An RS-232 transceiver converts logic-level digital signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic levels. The MAX3232CWE+T belongs to the interface IC hierarchy: RS-232 interface transceiver, communications interface IC, and discrete semiconductor. Its dual-transmitter, dual-receiver arrangement supports two serial data channels in a compact package. The 3.0V to 5.5V supply range allows operation from common 3.3V and 5V system rails. The advertised data-rate capability is up to 1Mbps, making the device suitable for point-to-point serial links, embedded control systems, industrial equipment, and computer peripherals that require true RS-232 signaling. The MAX3232 family uses charge-pump circuitry and external capacitors to generate the bipolar voltage levels required by RS-232 transmitters. The MAX3232CWE+T is supplied in a 16-pin SOIC package. Its pin-compatible relationship with MAX3232 family devices makes footprint and schematic changes unnecessary when selecting another appropriately qualified member of the family. The manufacturer product page identifies the MAX3232 as a production device and provides the product selection table, data sheet, and list-price information for the family. The transmitter and receiver arrangement is useful for console ports, service interfaces, configuration links, test equipment, and industrial communication equipment. When implementing the circuit, place the required external charge-pump capacitors close to the associated device pins and route the RS-232 lines away from sensitive analog and clock signals. The host-side logic interface and the external connector both require careful grounding and protection planning. This page summarizes the manufacturer family information, distributor identification, package details, operating range, and practical RS-232 design considerations. It also distinguishes the MAX3232CWE+T from other MAX3232 package and suffix options that are not necessarily drop-in replacements for every existing design. For the latest datasheet, lifecycle information, current commercial terms, or a sourcing quotation, use the manufacturer product page and the Request a Quote form on this page. Review the complete pin description and recommended capacitor circuit before releasing a PCB layout.

RFQ Contact
MAX3232CWE-TG068 - 3V-5.5V RS-232 Transceiver | Maxim
MAX3232CWE-TG068

MAX3232CWE-TG068 - 3V-5.5V RS-232 Transceiver | Maxim

Maxim Integrated MAX3232CWE-TG068 is a low-power, true RS-232 transceiver IC supporting a 3.0 V to 5.5 V supply, data rates up to 1 Mbps, and dual RS-232 driver/receiver functions in a 16-pin wide SOIC package. It converts logic-level signals to RS-232 levels and converts incoming RS-232 signals back to logic levels, providing a compact interface between modern digital systems and legacy serial equipment. An RS-232 transceiver is an interface IC within the broader hierarchy of transceiver IC, interface IC, and semiconductor. True RS-232 implementations include the voltage levels, slew behavior, and driver-receiver arrangement required by the RS-232 standard. The MAX3232 family is designed for equipment that requires bidirectional serial communication without the higher supply voltage traditionally associated with older RS-232 implementations. The MAX3232CWE-TG068 operates from 3.0 V to 5.5 V and supports communication rates up to 1 Mbps. Its low-power design is suitable for portable, industrial-control, instrumentation, and embedded equipment where supply current and board area matter. The manufacturer datasheet describes a charge-pump-assisted true RS-232 architecture and specifies the use of four 0.1 uF capacitors, allowing the device to generate the required bipolar voltage levels from a single low-voltage supply. The CWE package is a 16-pin wide SOIC intended for surface-mount assembly. This package provides more spacing between pins than a narrow SOIC, which can simplify routing and hand-soldering in equipment assembled with mixed analog and digital circuitry. Operating and electrical details such as the complete pin assignment, temperature range, receiver thresholds, driver slew rate, and exact capacitor tolerances must be confirmed in the manufacturer datasheet before releasing a production design. Typical applications include RS-232 ports in industrial controllers, laboratory instruments, barcode and data-acquisition equipment, service interfaces, and embedded systems that communicate with legacy peripherals. The 1 Mbps capability supports data links faster than conventional low-speed serial ports, while the 3.0 V to 5.5 V supply range permits operation from common embedded and logic rails. A critical implementation detail is capacitor placement: route the four 0.1 uF charge-pump capacitors with short, direct traces and maintain the ground return close to the device. Keep RS-232 driver outputs away from sensitive receiver inputs, use the package's defined supply and ground pins, and verify external connector protection according to the voltage tolerance and grounding requirements of the finished equipment. This product page consolidates the verified electrical envelope, package information, sourcing status, and engineering guidance for the MAX3232CWE-TG068. It also distinguishes verified same-footprint alternatives from narrower-package options and highlights the package and capacitance details that most directly affect PCB implementation.

RFQ Contact
MAX3232ECAE+ 1Mbps RS-232 Transceiver | Analog Devices
MAX3232ECAE+

MAX3232ECAE+ 1Mbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3232ECAE+ is a dual transmitter and dual receiver true RS-232 transceiver operating from 3.0 V to 5.5 V at data rates up to 1 Mbps. It provides ±15 kV ESD protection on the serial-port connection pins and is packaged in a 16-pin SSOP. The device supports both 3.3 V and 5 V systems while delivering the voltage levels required by TIA/EIA-232-F interfaces. A true RS-232 transceiver is an interface IC that converts logic-level signals from a host controller into RS-232 line levels and converts received RS-232 signals back into CMOS-compatible logic. In the electronic-component hierarchy, the MAX3232ECAE+ belongs to the RS-232 transceiver class within interface ICs. Its integrated dual charge-pump circuit generates the positive and negative voltages needed for compliant RS-232 transmission. Key features include two transmit channels, two receive channels, operation down to 10 nA, a maximum signaling rate of 1 Mbps, and ±15 kV ESD protection. The 3.0 V to 5.5 V supply range permits direct operation from both 3.3 V and 5 V digital systems. Four external 0.1 µF charge-pump capacitors support the internal voltage converters, while low-power operation helps reduce system consumption when the interface is not actively transferring data. The MAX3232E family uses true RS-232 output stages rather than a nonstandard TTL-level implementation. According to Analog Devices, the MAX3232E is pin, package, and functionally compatible with the industry-standard MAX232. Its receiver architecture rejects unwanted noise while restoring valid RS-232 signals to logic levels suitable for UARTs, microcontrollers, and industrial communication controllers. Typical uses include serial-port adapters, industrial control links, point-of-sale equipment, instrumentation, and embedded systems that require an RS-232 connection. The 1 Mbps capability is useful for legacy serial protocols operating below their historical limit, while the 3.0 V minimum supply supports modern 3.3 V processing systems that cannot directly use a 5 V-only interface. PCB design should place the four 0.1 µF charge-pump capacitors close to their associated pins and preserve the layout shown in the manufacturer data sheet. Keep RS-232 driver outputs away from sensitive receiver inputs, provide a solid ground reference, and route the external serial connector through suitable protection components when the cable environment is electrically harsh. This product page combines the MAX3232ECAE+ electrical characteristics, pin assignment, drop-in alternatives, comparison parameters, and practical layout guidance. It also distinguishes the exact 16-SSOP ordering code from other package and temperature variants so engineers can assess PCB footprint compatibility before approving a replacement.

RFQ Contact
MAX3232ECD - 250kbps Dual RS-232 Transceiver | Texas Instruments
MAX3232ECD

MAX3232ECD - 250kbps Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3232ECD is a dual-channel RS-232 line driver and receiver operating from 3 V to 5.5 V, supporting data rates up to 250 kbps and providing ±15-kV IEC ESD protection on the RS-232 bus pins. The device is packaged in a 16-pin SOIC for compact, surface-mount serial-interface designs. An RS-232 transceiver is the physical-layer interface between a host controller or data-processing equipment and an RS-232 port. It combines a line driver, which converts logic-level signals into RS-232 voltage levels, with a receiver, which converts incoming RS-232 signals back into logic-compatible levels. In the power-management hierarchy of communication systems, the MAX3232ECD provides bidirectional RS-232 signal conditioning between a UART controller and an external connector. Key operating features include two communication channels, a 3 V to 5.5 V supply range, and a maximum data rate of 250 kbps. The ±15-kV IEC ESD protection improves robustness when cables and connectors are exposed to electrostatic discharge. These characteristics make the device suitable for industrial control equipment, data acquisition systems, service interfaces, and legacy peripheral connections where a modern USB interface is not practical. The MAX3232 family uses charge-pump circuitry to generate the positive and negative voltage levels required by RS-232 from a single low-voltage supply. This allows the transceiver to operate from 3 V to 5.5 V instead of requiring the traditional ±12 V RS-232 supply. The manufacturer identifies the MAX3232 as a dual-channel 250-kbps line driver and receiver, while its comparison materials identify the MAX3232E as an improved direct drop-in replacement for the MAX3232. Typical applications include UART-to-RS-232 conversion in industrial controllers, programming and configuration ports in test equipment, service interfaces for embedded systems, and point-to-point links between computers or controllers and RS-232 equipment. Using one transceiver supports two RS-232 channels, allowing transmit and receive signals to share the same physical interface without requiring separate driver and receiver packages. The primary design consideration is ensuring that external cable transients remain within the device's operating and protection limits. Keep RS-232 traces away from sensitive clocks and data lines, provide a low-impedance ground return, and use the device pin descriptions in the manufacturer datasheet when assigning PCB functions. Power-supply bypassing and charge-pump capacitor placement should follow the datasheet's recommended layout to maintain stable operation and minimize coupling into adjacent circuitry. This product page combines the MAX3232ECD's electrical characteristics, package information, verified manufacturer resources, drop-in alternatives, comparison guidance, and practical interface-design notes. It is intended to help engineers confirm electrical compatibility, identify the correct 16-SOIC replacement, and plan PCB implementation before releasing a new RS-232 design.

RFQ Contact
MAX3232ECDB - RS-232 Transceiver 3-5.5V ±15kV ESD | TI
MAX3232ECDB

MAX3232ECDB - RS-232 Transceiver 3-5.5V ±15kV ESD | TI

The Texas Instruments MAX3232ECDB is a 2-driver, 2-receiver RS-232 line transceiver operating from a single 3V to 5.5V supply, with ±15 kV IEC ESD protection on the RS-232 bus pins, packaged in a 16-pin SSOP (DB, 5.30 mm width) for commercial 0C to +70C operation. An RS-232 transceiver is a line driver/receiver IC that converts logic-level UART signals (TTL/CMOS, 0V to VCC) into the higher-voltage RS-232 signaling levels (nominally ±5V or more) required by serial ports, modems, and industrial equipment. Within the interface IC family hierarchy, it sits alongside CAN, RS-485, and USB transceivers as a physical-layer signal-conditioning device in the broader category of communication interface components. Key features include guaranteed 250 kbps minimum data rate, a charge-pump architecture that generates the required RS-232 voltage levels using only four small 0.1 uF external capacitors, and ESD protection exceeding ±15 kV (IEC 61000-4-2 air-gap and contact discharge) plus ±15 kV human-body model on the bus terminals. The device meets or exceeds TIA/EIA-232-F requirements and operates from a single supply across the full 3.0V to 5.5V range, eliminating the need for dual ±12V rails. Technically, the MAX3232E family uses proprietary on-chip charge pumps with automatic internal voltage doubling and inversion to produce V+ and V- from the single VCC rail. Two transmitters and two receivers enable a full-duplex UART link with hardware flow control (RTS/CTS). Low receiver-enable current and a shutdown-capable architecture suit battery-powered designs. Typical applications include embedded MCU UART-to-RS-232 ports, industrial programmable logic controller (PLC) console interfaces, point-of-sale equipment, and networking equipment management ports. The E-version ESD rating makes it especially appropriate for ports exposed to human contact. Design consideration: place the four charge-pump capacitors close to pins 1-6 and use 0.1 uF ceramic parts rated at 16V or more; larger values (up to 1 uF) are acceptable but slow the pump startup slightly. This page synthesizes distributor pricing, pin-to-pin drop-in alternatives across TI and MaxLinear/Exar, and practical design notes not found in the manufacturer datasheet.

RFQ Contact