Products (20,000+)

M30624FGPFP#U5C - M16C/62P 16-bit MCU, 256KB Flash, 100-QFP | Renesas
M30624FGPFP#U5C

M30624FGPFP#U5C - M16C/62P 16-bit MCU, 256KB Flash, 100-QFP | Renesas

The Renesas Electronics M30624FGPFP#U5C is a single-chip 16-bit CMOS microcomputer from the M16C/60 Series M16C/62P Group, integrating 256 KB of flash memory and 24 MHz of CPU performance in a 100-pin QFP (14x20 mm) package. It combines the high-performance M16C/60 CPU core with the silicon-gate CMOS process, delivering 16-bit processing at low power consumption for embedded control applications. A microcontroller (MCU) is an integrated circuit that combines a CPU, memory (RAM/ROM/Flash), and programmable I/O peripherals on a single silicon die. The M16C family sits within the 16-bit microcontroller taxonomy, between 8-bit MCUs (e.g., 8051) and 32-bit ARM Cortex-M devices, offering a balance of code density, deterministic interrupt latency, and peripheral integration well suited to real-time control. The M16C/62P Group sits under the M16C/60 Series umbrella of Renesas's mid-range MCU portfolio. Key features include 256 KB of on-chip flash (256K x 8), 4 KB of on-chip RAM, a 24 MHz maximum CPU clock, a 10-bit A/D converter, a wide operating voltage range of 2.7V to 5.5V, and an operating temperature range of -20C to +85C. The 100-QFP package provides ample I/O for motor control, automotive body electronics, and industrial automation. Multiple timers, serial interfaces (UART, I2C, SPI), and interrupt controllers are integrated, eliminating the need for external peripherals. The M16C/60 CPU core uses a register-based architecture with 24-bit linear addressing, supporting high-level language efficiency and rich addressing modes. Built-in flash allows in-application reprogramming via serial or background programming modes, simplifying field firmware updates. The silicon-gate CMOS process yields low quiescent current and supports 3V and 5V system designs with a single part number. Typical applications include industrial motor control, HVAC control boards, automotive body ECUs, home appliance controllers (washing machines, microwave ovens), and metering/pump controllers. The wide 2.7V-5.5V supply range makes it suitable for both 3.3V and 5V logic designs. When designing with this MCU, ensure the 100-pin QFP footprint matches your PCB land pattern and provide adequate decoupling (100 nF + 10 uF) near each power pin. Use the on-chip debug/flash programming interface for production firmware loading rather than relying on external programmers. Note that Renesas recommends the newer M3062LFGPFP for new designs. This page consolidates distributor pricing, drop-in alternative analysis, and practical design notes beyond what the manufacturer datasheet alone provides.

RFQ Contact
M30626FHPFP - 16-Bit 24MHz M16C/62P MCU, 384KB Flash | Renesas
M30626FHPFP

M30626FHPFP - 16-Bit 24MHz M16C/62P MCU, 384KB Flash | Renesas

The Renesas M30626FHPFP is a 16-bit single-chip CMOS microcontroller from the M16C/62P family, built around the high-performance M16C/60 Series CPU core with 384KB of on-chip flash memory and 24MHz maximum operating frequency, housed in a 100-pin QFP (14x20 mm) package. It supports 5V operation with a wide 2.7V to 5.5V supply range, integrates 31KB of RAM, and provides rich on-chip peripherals including multi-channel 10-bit A/D converter, DMA controller, three UART/SIO channels, and timers. An M16C/62P microcontroller is a 16-bit CISC MCU from the M16C family of single-chip microcomputers, engineered using high-performance silicon-gate CMOS process technology. It sits within the broader taxonomy of microcontroller -> embedded processor -> semiconductor IC, and is designed for industrial-grade control applications requiring deterministic real-time response, low EMI, and a robust instruction set optimized for C compiler code density. Key differentiating features include 384KB flash program memory (384K x 8 organization), 31KB RAM, 87 I/O pins, four DMA channels, three serial I/O blocks, 8-bit and 16-bit timers, a 10-bit A/D converter with up to 26 input channels, and a watchdog timer. It supports both 3V and 5V operation (industrial temperature range -40C to +85C) and is Pb-free, RoHS-compliant. The device implements the M16C/60 CPU core with 16-bit fixed instruction width, register-based architecture with 32KB address space, and efficient C-language support. Its integrated peripherals include CRC calculation hardware, intelligent I/O ports capable of key input wake-up, and a power-saving mode with multiple clock gearing options. The architecture enables deterministic interrupt latency for real-time control. Typical applications include industrial automation controllers, motor control inverters, factory automation PLCs, building HVAC controls, security system panels, vending machine controllers, and white goods control boards. The wide operating voltage (2.7V-5.5V) and industrial temperature range (-40C to +85C) make it suited to harsh environments. Design consideration: when migrating from earlier M16C/62 to M16C/62P, verify the watchdog timer and A/D converter channel mapping. Place a 0.1uF decoupling capacitor adjacent to each VCC/AVCC pin pair and keep the analog reference traces short to minimize digital switching noise on ADC sampling accuracy. This page synthesizes distributor pricing from DigiKey/Mouser, drop-in alternatives in the same 100-QFP package, and practical design notes that complement the manufacturer datasheet with field-application guidance.

RFQ Contact
M30855FJGP#U3 - 16/32-Bit M32C/85 MCU, 512KB Flash, 144-LQFP | Renesas
M30855FJGP#U3

M30855FJGP#U3 - 16/32-Bit M32C/85 MCU, 512KB Flash, 144-LQFP | Renesas

The Renesas M30855FJGP#U3 is a 16/32-bit single-chip CMOS microcontroller from the M32C/80 series (M32C/85 group) operating at up to 32 MHz, integrating 512 KB of on-chip flash program memory and 24 KB of RAM in a 144-pin LFQFP (20x20 mm) package. The part is specified over an industrial temperature range of -40C to +85C and operates from a 3 V to 5.5 V supply, making it compatible with both 3.3 V and 5 V system designs. The M30855FJGP#U3 offers 121 general-purpose I/O pins, multiple on-chip peripherals including timers, serial interfaces (UART/SIO/I2C), an A/D converter, and DMA channels for high-throughput embedded control. A microcontroller (MCU) is a self-contained computing subsystem that integrates a CPU core, program and data memory, peripherals, and I/O on a single silicon die. Within the broader semiconductor taxonomy, MCUs belong to the integrated circuits family, specifically the microcontroller subcategory, and sit below microprocessors in complexity while providing complete embedded-control functionality. The M32C/80 platform is Renesas' legacy 16-bit CISC architecture with 32-bit internal registers, popular in industrial automation, automotive body controllers, and consumer appliances. Key features of the M30855FJGP#U3 include 512 KB flash program memory (512K x 8), 24 KB of RAM (24K x 8), a maximum operating frequency of 32 MHz, an internal oscillator, and 121 user I/O pins routed through the 144-LFQFP package. The wide 3 V to 5.5 V supply range simplifies integration into both legacy 5 V designs and modern 3.3 V subsystems without level shifters, while the industrial temperature grade enables deployment in factory, automotive cabin, and outdoor equipment. The M32C/85 core architecture uses a CISC instruction set optimized for compact code density, with hardware multipliers, multiple register banks, and a rich interrupt controller that supports real-time control loops. The integrated DMA reduces CPU load for high-speed peripheral transactions such as serial communication and A/D conversion. Typical applications for the M30855FJGP#U3 include industrial factory automation systems, automotive body electronics, consumer appliance control boards, and general-purpose 16-bit embedded platforms. Engineers select this part for designs that require a mature, well-supported Renesas M16C/M32C software ecosystem. When designing with the M30855FJGP#U3, ensure that the chosen emulator/debugger (such as the E8a or E10A-USB) matches the device group, and follow the M32C/85 hardware manual pin-function assignment tables to avoid peripheral conflicts on the 121 I/O pins. This page synthesizes verified distributor pricing, drop-in alternative MPNs from the Renesas M16C/M32C family, and practical design notes not consolidated on any single manufacturer page.

RFQ Contact
M68LC302CAF20VCT-FR - 20MHz M68000 MPU w/ CPM, 100-LQFP | NXP
M68LC302CAF20VCT-FR

M68LC302CAF20VCT-FR - 20MHz M68000 MPU w/ CPM, 100-LQFP | NXP

The NXP M68LC302CAF20VCT-FR is a 20 MHz integrated M68000 microprocessor that combines the MC68000 core with the Communications Processor Module (CPM), supplied in a 100-pin LQFP (14x14 mm) package. The low-cost LC variant omits the cryptographic coprocessor that distinguishes the MC68302, retaining the dual M-Bus/SCC serial channels, three parallel ports, and DMA channels that made the MC68302 family the canonical one-chip networking and communications processor of the early 1990s. The 20 MHz bus clock delivers approximately 2.7 MIPS sustained performance, suitable for embedded routers, X.25/PAD controllers, and industrial serial concentrators. A MPU (Microprocessor Unit) is the master execution engine of an embedded system; in this ColdFire M68000 family, it forms the heart of a printed-circuit assembly alongside external memory and peripherals. The M68LC302 sits at the top of a typical hierarchy: MPU -> microprocessor -> processor -> digital IC -> semiconductor. The integrated CPM (Communications Processor Module) is the architectural innovation of the 68302 line, offloading HDLC/SDLC framing, UART, transparent bisync, and DMA from the 68000 core, allowing the CPU to focus on protocol stack and management tasks. The 'C' suffix denotes the 5V core, the 'AF' indicates the LQFP package, '20' specifies 20 MHz operation, 'VC' marks plastic LQFP with operating temperature -40C to +85C, and 'T-FR' is the lead-free tray shipping option. Key features include 1.1K bytes of internal dual-port RAM for descriptor tables, three independent full-duplex serial channels (two SCC plus one SMC), seven DMA channels, a 16-bit parallel I/O port, and a 24-bit address bus supporting up to 16 MB of linear memory. The device operates from a single 5V supply and provides a 4-wire serial debug port for background-mode development. The 100-pin LQFP package provides 0.5 mm lead pitch, compatible with standard surface-mount assembly processes. Typical applications include ISDN terminal adapters, X.25 packet assemblers/disassemblers, low-end industrial routers, serial protocol converters, and legacy telecommunications backplanes. Production engineers commonly use the M68LC302 in maintenance-of-way equipment, RTUs, and SCADA serial front ends where the MC68302 software base is preserved but cryptographic hardware is not required. When designing with this device, engineers should note the 5V-only core supply, the lack of on-chip flash (external ROM/EPROM is required), and the importance of bus arbitration when interfacing to external DMA peripherals. Lead-free (T-FR) parts comply with current RoHS soldering profiles and should be used in new designs. The part is no longer recommended for new designs per NXP's product lifecycle page, so long-term availability planning is essential.

RFQ Contact
MAC7111MAG40 - 32-Bit ARM7 MCU 512KB Flash 144-LQFP | NXP
MAC7111MAG40

MAC7111MAG40 - 32-Bit ARM7 MCU 512KB Flash 144-LQFP | NXP

The NXP MAC7111MAG40 is a 32-bit ARM7TDMI-S Flash microcontroller developed for embedded automotive body and chassis applications, delivering 50 MHz CPU performance with 512KB on-chip Flash and 144-LQFP (20x20 mm) packaging. It integrates a 16-channel 10-bit ADC, CAN 2.0 interface, enhanced I/O capability with external bus, and AEC-Q100 automotive qualification. Background: A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash/ROM), data memory (RAM), and a rich peripheral set. The ARM7TDMI-S core is a 32-bit RISC architecture featuring the Thumb instruction set for improved code density, widely adopted in automotive and industrial embedded systems. Within the broader taxonomy, the MAC7111MAG40 belongs to the MCU -> microcontroller -> embedded processor -> semiconductor IC hierarchy, and to the Flash-based automotive MCU sub-family. Key features include 512KB program Flash, 32KB SRAM, 50 MHz core clock, 112 GPIO lines, 16-channel 10-bit ADC, two CAN 2.0A/B controllers, an external bus interface for memory expansion, and AEC-Q100 Grade 1 qualification supporting -40C to +125C operation. The MAC7111 family is pin-compatible with MAC7120/MAC7130/MAC7140 devices, allowing scalability between Flash sizes and peripheral mixes. Architecture depth: the MAC7111MAG40 uses the ARM7TDMI-S core with a 3-stage pipeline and Von Neumann bus. Its embedded Flash controller accelerates in-application programming, and the Enhanced Capture Timer (ECT) module supports up to 10 channels for precise PWM and pulse measurement. The device integrates a 16-channel 10-bit ADC with 7 us minimum conversion time. Typical applications include automotive body control modules (BCMs), instrument clusters, HVAC controllers, lighting modules, and CAN node ECUs. AEC-Q100 Grade 1 qualification makes it suitable for under-hood and chassis systems exposed to high thermal stress. Design consideration: when migrating from the MAC7110 to MAC7111 family, verify the external bus timing parameters against any SRAM or peripheral glue logic, and ensure that the 144-LQFP pad layout and pinout match the MAC71xx pin-compatible devices to enable drop-in scalability. This page consolidates distributor pricing, pin-compatible drop-in alternatives, and design notes that go beyond the manufacturer datasheet, supporting both new designs and lifecycle refresh decisions for long-life automotive programs.

RFQ Contact
MAC7111MPV40 - 32-Bit RISC MCU, 512KB Flash | Freescale
MAC7111MPV40

MAC7111MPV40 - 32-Bit RISC MCU, 512KB Flash | Freescale

Freescale Semiconductor MAC7111MPV40 is a 32-bit RISC microcontroller with 512 KB of flash memory in a 144-terminal automotive-temperature LFQFP package. The verified source data identifies it as an automotive-grade microcontroller with gull-wing terminals and a square package. Its position in the embedded hierarchy is microcontroller, embedded processor, RISC processor, and semiconductor. The MAC7111MPV40 combines embedded flash, external-bus-oriented connectivity, and analog-to-digital conversion capabilities in a single device. The source data specifically identifies a 16-channel ADC and an external bus, while detailed conversion resolution, bus timing, clock architecture, voltage limits, and peripheral list are not present in the supplied verified records. Those values remain marked as data needed rather than inferred. Its automotive temperature designation makes the device relevant to vehicle electronics requiring a substantial embedded-programming and peripheral footprint. The 144-terminal LFQFP provides many external connections compared with small general-purpose MCUs, but it also demands careful board layout and a larger land pattern than leadless packages. Designers should preserve the manufacturer reference-manual pin assignments when creating a new PCB. Typical application areas include automotive body and chassis control, sensor aggregation, actuator control, gateway modules, and embedded vehicle-network electronics. The external bus can connect the MCU to additional peripherals, while the 16-channel ADC supports analog sensor and vehicle-signal acquisition. Exact timing, electrical limits, and software-support details must be checked in the MAC7111 hardware documentation before release. For PCB design, use the manufacturer package drawing and pinout rather than distributor category summaries. Confirm all 144 terminal names, exposed-pad requirements, power rails, ground connections, oscillator circuits, and external-bus routing. Because verified lifecycle, supply, and price data are not supplied, procurement should use authorized-channel confirmation rather than assumptions. This page consolidates verified package, memory, interface, and marketplace-source information while clearly separating it from unavailable technical data. It also explains the sourcing and design limits engineers must resolve from the manufacturer hardware documentation.

RFQ Contact
MAC7111MPV50-FR 50MHz 512KB Flash ARM7 MCU | NXP
MAC7111MPV50-FR

MAC7111MPV50-FR 50MHz 512KB Flash ARM7 MCU | NXP

The NXP Semiconductors MAC7111MPV50-FR is a 32-bit single-core ARM7TDMI-S microcontroller operating at 50 MHz, with 512 KB of flash memory, in a 144-LQFP surface-mount package. The verified distributor listing identifies an automotive-grade gull-wing package with 144 terminals and a square 20 mm by 20 mm body. These core figures position the device for embedded control systems requiring deterministic processing, substantial on-board program storage, and a high pin count for external interfaces. A microcontroller is a semiconductor that integrates a processor core, nonvolatile program memory, data memory, peripheral controllers, and interface logic into one embedded-computing device. Within the hierarchy of semiconductor, integrated circuit, embedded processor, and microcontroller, the MAC7111MPV50-FR belongs to the ARM7TDMI-S product class. That processor organization is intended for embedded control rather than a desktop operating system, making the device relevant to automotive electronics, industrial controllers, communication equipment, and real-time control products. The verified product information establishes a 50 MHz operating frequency, 512 KB flash, 32-bit single-core processing, and 144-LQFP packaging. One search result also characterizes the part as automotive-grade, while the family hardware document contains electrical specifications, pin assignments, and package diagrams. Flash capacity provides room for embedded code and constants, but the supplied excerpts do not expose RAM size, peripheral inventory, memory-map details, or electrical limits; those values must be verified in the full manufacturer hardware document before schematic or firmware work. Engineers should treat the 144-pin LQFP as a substantial mixed-signal and digital controller package. The 20 mm by 20 mm footprint requires adequate routing area, exposed escape access, and careful assembly planning. Its gull-wing leads are more visually inspectable than fine-pitch BGA interconnects, but they still require controlled fanout, solder mask definition, and thermal verification. The family document's pin assignments should govern connector, ground, supply, clock, and peripheral routing. Typical engineering uses include automotive body and communication modules, industrial automation equipment, networked embedded controllers, and compact real-time systems. Suitability depends on validating the exact peripheral set, memory resources, electrical characteristics, temperature range, and software constraints. No assumption should be made merely because another 50 MHz controller has a similar headline specification; software architecture and peripheral compatibility are as important as clock speed. A legacy or unavailable MCU replacement must be treated as a risk-management decision. Confirm package dimensions, pin assignments, power behavior, peripheral multiplexing, clock topology, memory, and software binary compatibility before substituting. This page combines verified distributor identification, package data, sourcing information, and explicit uncertainty markers rather than inferring unsupported specifications. The practical information gain here is the separation of verified facts from missing engineering data: the 50 MHz ARM7TDMI-S core, 512 KB flash, and 144-LQFP footprint are usable selection facts, while unspecified RAM, pins, electrical limits, and lifecycle status remain explicit validation items.

RFQ Contact
MAC7111VPV50 - 32-Bit 50MHz ARM7 MCU | NXP
MAC7111VPV50

MAC7111VPV50 - 32-Bit 50MHz ARM7 MCU | NXP

The NXP Semiconductors MAC7111VPV50 is a 32-bit ARM7 microcontroller operating at 50 MHz, with 512 KB of flash memory and a 144-LQFP (20x20 mm) package. According to the verified distributor listings, its supply voltage range is 2.35 V to 5.5 V, and it provides a 10-bit ADC feature identified in the retrieved component data. The device is positioned for industrial embedded-control designs requiring substantial embedded flash and a high pin count. An MCU is an integrated circuit that combines a processor core, nonvolatile program memory, data memory, peripherals, and interface logic on one semiconductor device. The MAC7111VPV50 belongs to the ARM7-based embedded-controller hierarchy: MCU, embedded processor, microcontroller, and semiconductor. This integration allows a controller board to execute firmware and supervise external sensors, actuators, communications, and power functions without requiring separate memory and processor packages. Verified headline features include ARM7 architecture, 32-bit processing, a 50 MHz clock, 512 KB organized as 512K x 8 flash, 144 terminals, a gull-wing terminal form, an industrial temperature grade, and an LFQFP package. The high pin count can support systems requiring numerous I/O resources, while 512 KB of flash provides room for embedded firmware. The exact RAM, core peripherals, ADC resolution beyond the listed 10-bit indication, and individual I/O functions are not supplied in the verified data. The MAC7111VPV50 is identified as an industrial-grade microcontroller rather than a power semiconductor. Accordingly, no safe operating area is applicable. Its design use should be based on the manufacturer family hardware specifications and board-support requirements. Before schematic release, engineers must verify the complete pin assignment, alternate-function multiplexing, recommended external components, clock configuration, programming method, and operating limits from the official family document. Potential uses include industrial automation controllers, IoT equipment, embedded motor-control supervisory logic, metering systems, and low-power board designs. The 50 MHz ARM7 core and 512 KB flash make the device relevant where deterministic embedded software and a moderate code footprint are needed. Its 144-LQFP package is larger than modern leadless MCU packages but exposes many terminals and can simplify access to communications, general-purpose I/O, and control functions when exact pin verification is completed. When designing around this MCU, preserve the package footprint, pin numbering, exposed programming signals, power rails, decoupling requirements, and clock network exactly as defined by the family documentation. Because no verified drop-in alternatives were returned, engineers should not substitute an MPN based only on processor speed or memory size. Firmware, timing, peripheral mapping, voltage levels, and package-level compatibility must all be revalidated before any replacement is approved. This product page consolidates the verified distributor specifications, sourcing links, package identity, application context, and design limitations for MAC7111VPV50. It adds engineering-oriented selection guidance while explicitly separating known values from data that still requires confirmation from the manufacturer family hardware specifications.

RFQ Contact
MAC7112MAG40 - 40MHz 32-Bit Automotive MCU | NXP
MAC7112MAG40

MAC7112MAG40 - 40MHz 32-Bit Automotive MCU | NXP

The NXP MAC7112MAG40 is a 32-bit ARM7TDMI-S microcontroller operating at 40 MHz, with 256 KB of Flash program memory, 16 KB of RAM, and 32K x 8 EEPROM in a 144-pin LQFP package measuring 20 x 20 mm. Designed for embedded automotive applications, the device combines a single-core processor, external-bus capability, and 16-channel A/D conversion in one integrated MCU. Its stated 2.5 V / 5 V operating-voltage support and -40°C to +125°C temperature range make it relevant to demanding automotive control and monitoring systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into one device. In the hierarchy, the MAC7112MAG40 is an MCU, embedded processor, and semiconductor, with the ARM7TDMI-S core providing 32-bit RISC execution. Its Flash memory supports firmware storage, while RAM provides working memory for real-time control tasks. The 32K x 8 EEPROM adds nonvolatile data storage for calibration values, configuration data, and diagnostic records. The verified feature set includes a 40 MHz operating frequency, 256 KB Flash, 16 KB RAM, 32K x 8 EEPROM, 144-LQFP packaging, external-bus support, and 16-channel A/D conversion. The package is a tray-packaged automotive MCU according to the supplied distributor information. Partstack data identifies CMOS technology, a 260°C peak reflow temperature, an e3 JESD-609 code, tin terminal finish, and a 40-second maximum dwell at peak reflow temperature. The MAC7112MAG40 fits applications such as body and chassis electronics, powertrain supervisory controls, vehicle communication gateways, sensor aggregation, actuator controllers, and diagnostic systems. Its 16-channel ADC supports analog sensor acquisition, while its external bus can connect the MCU to additional controllers, memory, or communication devices. The -40°C to +125°C range is especially important for automotive environments, although the exact operating region for every internal peripheral should be confirmed in the manufacturer datasheet. Designers should verify power sequencing, clocking, reset behavior, ADC reference, external-bus timing, and unused-pin handling against the manufacturer documentation before layout release. The 144-pin LQFP package requires careful escape routing and thermal review. Automotive production also requires supplier traceability, programming, test, and change-control procedures beyond basic electrical compatibility. This page consolidates verified distributor snippets, the supplied cross-reference results, and engineering guidance without treating unverified alternatives as drop-in parts. Because the retrieved data does not establish five pin-compatible replacements, no unsupported substitute list is presented.

RFQ Contact
MAC7112MPV40 - 40MHz ARM7 MCU, 256KB Flash | NXP
MAC7112MPV40

MAC7112MPV40 - 40MHz ARM7 MCU, 256KB Flash | NXP

The NXP Semiconductors MAC7112MPV40 is a 32-bit ARM7TDMI-S microcontroller operating at 40 MHz, with 256 KB of flash memory and a 112-LQFP package measuring 20 mm by 20 mm. The verified distributor data also identifies an external bus, a 16-channel 10-bit A/D converter, and a 2.35 V to 2.75 V operating-supply range. These characteristics place it in the embedded microcontroller category, where a processor core, memory, analog conversion, and communications peripherals are integrated into one device. A microcontroller is a compact computer intended for embedded control. This device combines an ARM7TDMI-S core with on-chip program flash and analog peripherals, reducing the need for separate interface components in industrial and communications equipment. Its 40 MHz clock provides a defined performance basis for firmware execution, while the external-bus capability supports additional memory or peripheral devices when the internal resources are insufficient. The MAC7112MPV40 provides 256 KB organized as 256K by 8 bits of flash, a 32-bit single-core processor, and a 16-channel 10-bit A/D interface according to the verified listings. Its 2.35 V to 2.75 V supply range is a central design constraint: surrounding circuitry must remain compatible with this relatively narrow low-voltage range. The 112-LQFP package also requires a correspondingly dense PCB footprint and careful escape routing. Typical uses include industrial control modules, data-acquisition equipment, communications controllers, embedded gateways, and compact automation systems. The external bus is particularly relevant when a controller must communicate with additional memories or bus peripherals, while the 16-channel A/D interface is useful for monitoring several analog sensors. Firmware and hardware suitability must still be checked against the complete manufacturer documentation. A critical design consideration is footprint continuity. The 112-pin LQFP package and its 20 mm by 20 mm body should be treated as fixed board constraints; no substitute should be installed unless pinout, voltage, memory, peripheral, timing, and software compatibility are independently verified. Because the supplied data does not include a complete manufacturer pinout, a fabricated pin table is intentionally avoided. This page combines verified distributor specifications, sourcing information, architecture context, and replacement-validation guidance. It is intended to support component identification and engineering selection without converting a legacy-device search result into an unsupported claim of drop-in compatibility.

RFQ Contact
MAC7121MPV50 - 32-Bit 50MHz 512KB Flash MCU | NXP
MAC7121MPV50

MAC7121MPV50 - 32-Bit 50MHz 512KB Flash MCU | NXP

The NXP Semiconductors MAC7121MPV50 is a 32-bit ARM7TDMI-S microcontroller with a 50 MHz operating frequency, 512 KB of flash memory, and a 112-LQFP 20 mm x 20 mm package. It is identified by distributor data as a high-performance embedded controller in the MAC71 series, with automotive temperature-grade sourcing information also present in the verified results. An MCU is an integrated circuit that combines a processor core, program memory, data memory, peripherals, and interrupt control on one semiconductor device. The MAC7121MPV50 sits in the hierarchy embedded controller -> microcontroller -> integrated circuit -> semiconductor. Its flash-backed program memory supports standalone firmware storage, while the ARM7TDMI-S core provides the execution engine for real-time embedded control. The verified listing identifies the MAC7121MPV50 as a single-core, 32-bit device operating at 50 MHz with 512 KB, or 512K x 8, of flash. Its 112-lead LQFP package uses a square 20 mm x 20 mm gull-wing format. The available evidence also identifies CANbus, I2C, SCI, and SPI connectivity in a comparison listing, although complete peripheral, voltage, timing, and electrical limits require confirmation from the original manufacturer documentation. Typical embedded uses include industrial control, automotive electronics, communications gateways, motor and actuator control, sensor acquisition, and networked embedded equipment. The 50 MHz ARM7TDMI-S core is appropriate for deterministic control loops and protocol handling when the design stays within the device's verified electrical and peripheral limits. The 512 KB flash capacity provides room for application firmware, boot code, diagnostics, and configuration data. A key design consideration is that package compatibility alone does not establish a safe replacement. Before substitution, verify the exact pin assignments, supply voltage, clock configuration, memory map, peripheral set, electrical ratings, temperature grade, and software support. For automotive or safety-related use, also confirm qualification, errata, production status, and manufacturer change notifications. This product page consolidates the verified distributor identity, package and memory data, sourcing links, and engineering cautions into one reference. It distinguishes verified facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate MAC7121MPV50 without relying on unverified generic MCU assumptions.

RFQ Contact
MAC7131MVF40 - 32-bit ARM7 MCU, 512KB Flash, 40MHz | NXP
MAC7131MVF40

MAC7131MVF40 - 32-bit ARM7 MCU, 512KB Flash, 40MHz | NXP

The NXP MAC7131MVF40 is a 32-bit ARM7TDMI-S microcontroller (MCU) with 512KB of embedded Flash memory, 40MHz CPU clock, and 128 I/O ports, housed in a 208-ball MAPBGA (17x17 mm, 1mm pitch) package. It is AEC-Q100 qualified for automotive body, chassis, and safety applications, and supports an operating temperature range of -40C to +125C with a 2.35V to 2.75V core supply and a 5V tolerant I/O domain. An ARM7TDMI-S microcontroller is a 32-bit RISC processor core based on the ARM7 family architecture, designed for embedded systems where deterministic real-time response, low power consumption, and a rich peripheral set are required. Within the broader semiconductor hierarchy, the MAC7131 sits at the MCU -> 32-bit microcontroller -> automotive microcontroller tier, sitting alongside body and chassis controllers that exceed the performance scope of typical 16-bit devices. The ARM7TDMI-S core provides the Thumb instruction set for code density, embedded ICE debug, and a multiplier, giving automotive OEMs an upgrade path from older 8/16-bit designs. Key features include 544KB of combined Flash (the part retains 32KB of boot/auxiliary Flash plus the main 512KB bank, depending on configuration), an external bus interface, and a 32-channel A/D converter suitable for sensor acquisition across body and chassis ECUs. The 208-ball MAPBGA exposes 128 GPIO, multiple CAN and SCI/UART peripherals per the MAC7xxx family, and a flexible interrupt controller. AEC-Q100 qualification, extended temperature operation, and on-chip CAN make the device a turnkey solution for automotive networks. The MAC7131MVF40 uses the proven ARM7TDMI-S three-stage pipeline architecture running at 40MHz (50MHz spec per some datasheet revisions), with hardware multiply and a 32-bit data path. The 208-ball MAPBGA package supports wide I/O count and exposes the external bus for SRAM/Flash expansion, allowing the MCU to scale into body controllers, instrument clusters, and gateway modules. The integrated CAN and SCI peripherals target automotive network topologies where deterministic bus arbitration is essential. Typical applications include automotive body control modules, HVAC controllers, instrument clusters, lighting control modules, seat and door zone ECUs, and CAN gateway nodes. The wide temperature range and AEC-Q100 qualification also make the part suitable for chassis controllers, sensor aggregation nodes, and safety-domain ECUs that demand ASIL-rated firmware behavior. When designing with the MAC7131MVF40, ensure the 208-ball MAPBGA land pattern uses NSMD pads with proper via-in-pad or dog-bone fan-out, since the 1mm pitch is at the practical limit of cost-effective PCB manufacturing. Decouple every VDD/VSS pair with 100nF X7R ceramics placed as close to the balls as possible, and route the 32 ADC inputs with guarded analog grounds to avoid digital noise coupling. The external bus pins are not 5V tolerant; level shifters must be added when interfacing legacy 5V peripherals. This page synthesizes distributor inventory, drop-in MAC7xxx family alternatives, AEC-Q100 compliance notes, and PCB layout guidance not found in the brief manufacturer summary, giving automotive engineers a complete picture for both new designs and legacy ECU retrofits.

RFQ Contact
MAC7131VVF50R2 - 32-Bit ARM7 MCU, 512KB Flash, 144-MBGA | NXP
MAC7131VVF50R2

MAC7131VVF50R2 - 32-Bit ARM7 MCU, 512KB Flash, 144-MBGA | NXP

The NXP Semiconductors MAC7131VVF50R2 is a 32-bit ARM7TDMI-S based microcontroller integrated circuit delivering 50 MHz CPU clock speed with 512 KB of embedded Flash memory, packaged in a 144-ball MAP-BGA (7x7 mm) format. It operates from a 2.35 V to 2.75 V supply and is targeted at automotive body and chassis applications requiring deterministic real-time response. The MAC7100 family is a series of ARM7TDMI-S based microcontrollers (MCUs) designed by Freescale (now NXP) for automotive body electronics. As an automotive microcontroller, it sits within the broader hierarchy of embedded processors > microcontroller units (MCUs) > 32-bit MCUs > ARM Cortex/ARM7 family. The part integrates Flash, SRAM, multiple timer modules, CAN and SPI peripherals, and an A/D converter on a single die, reducing system BOM and PCB complexity. Key features include 512 KB of on-chip program Flash (organized as 512K x 8), a 32-bit ARM7TDMI-S RISC core with Thumb instruction support, automotive-grade temperature operation, and an integrated enhanced CAN (FlexCAN) interface. The MAC7100 series was designed for ISO 9141 and SAE J1850 body-comms protocols and is widely used in BCM (body control module) designs. Typical applications include automotive body control modules, instrument cluster controllers, HVAC panels, door module controllers, and powertrain peripheral ECUs. The part meets AEC-Q100 stress-test requirements as qualified by Freescale (now NXP) for under-the-hood and body-comfort zones. Designers should note that the part is mature and in some variants rated Last Time Buy by NXP; verify lifecycle status with the distributor before committing to new designs. The 144-MBGA package requires 4-layer PCB stack-up with controlled-impedance routing for the external memory bus to meet timing closure.

RFQ Contact
MAX32550-LCS+T - Secure Cortex-M3 MCU 1MB Flash 121-CTBGA | ADI
MAX32550-LCS+T

MAX32550-LCS+T - Secure Cortex-M3 MCU 1MB Flash 121-CTBGA | ADI

The Analog Devices (formerly Maxim Integrated) MAX32550-LCS+T is an ARM Cortex-M3 based DeepCover secure microcontroller running at 108 MHz, integrating 1 MB of embedded Flash, 256 KB of system RAM, and 8 KB of battery-backed AES self-encrypted NVSRAM, packaged in a 121-ball CTBGA (8x8 mm). The DeepCover security subsystem is purpose-built for trusted devices such as mobile chip-and-PIN payment terminals and PIN pads. A secure microcontroller is an MCU that combines a standard processor core (here, ARM Cortex-M3) with integrated hardware cryptographic engines, secure boot ROM, tamper detection, and physically separate key storage. The MAX32550 belongs to the broader hierarchy: secure MCU -> microcontroller -> embedded processor -> integrated circuit. This device targets financial-terminal OEMs who need both application-class processing power and FIPS-grade security in a single chip. Key features include a 32-bit ARM Cortex-M3 core with 108 MHz maximum clock, 1 MB embedded Flash (1M x 8), 256 KB SRAM, 8 KB AES self-encrypted NVSRAM with battery backup, integrated cryptographic accelerators (AES, DES, SHA, RSA, ECC), hardware True Random Number Generator, secure boot ROM, physical tamper detection pins, an integrated smart-card interface (ISO 7816), magnetic-stripe reader interface, and USB 2.0 Full-Speed with on-chip PHY. The MAX32550 integrates a BGA package with 121 balls on an 8x8 mm body, allowing a compact PCB solution that includes the secure element, application MCU, and physical-tamper mesh interfaces in a single device. The NVSRAM is automatically encrypted with AES-256 keys generated and stored in a dedicated hardware block, removing software-side key management for tamper-sensitive state. The chip targets POS terminal OEMs seeking PCI PTS 4.x/5.x and EMVCo certification. Typical applications include mobile chip-and-PIN payment terminals, PIN pads, POS terminals, secure authentication tokens, EMV smart-card readers, and other financial-grade trusted devices. Industrial secure-control applications such as access-control and hardware security modules also benefit from the integrated tamper mesh. Design consideration: route the battery-backup NVSRAM domain with a separate power rail and a battery cell or super-cap; the cryptographic NVSRAM state is preserved while the rest of the chip powers down. Provide adequate ground-return vias under the CTBGA to meet EMI/magnetic-stripe-decoder noise immunity requirements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
MAX32666GXMBT+ - Dual-Core Cortex-M4/M4F BLE 5 MCU | ADI
MAX32666GXMBT+

MAX32666GXMBT+ - Dual-Core Cortex-M4/M4F BLE 5 MCU | ADI

The Analog Devices / Maxim Integrated MAX32666GXMBT+ is a 32-bit dual-core ARM Cortex-M4/M4F microcontroller with FPU, integrated Bluetooth 5 LE radio, hardware security suite, and 1MB Flash, housed in a 121-ball CTBGA (8x8 mm) package. The part operates from 1.71V to 3.6V supply at up to 96MHz core clock and includes 192KB SRAM plus 1MB on-chip Flash. Its dual-core architecture pairs an applications processor with an always-on network co-processor, enabling low-power wearable and IoT designs without sacrificing radio throughput. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one silicon die. The Cortex-M4 family adds a single-precision hardware floating-point unit (FPU) for DSP-class math, and a dual-core MCU further partitions responsibilities - one core runs application logic while the other offloads wireless stack, sensor fusion, or security tasks - reducing wake events and total system energy per task. Key features of the MAX32666GXMBT+ include Bluetooth 5 LE with 2 Mbps high-throughput and 4x long-range PHY modes, ADI TrustZone-style hardware secure element (TRUST), secure boot, true random number generator, AES-256, and SHA-256 accelerators. The integrated DC-DC converter and multiple low-power modes (Active, Sleep, Deep Sleep, Backup, Standby) yield system-level current as low as a few microamps in deep-sleep retention, critical for coin-cell and rechargeable wearables. Architecturally, the part is fabricated in a low-leakage CMOS process and uses ADI's ultra-low-power design IP. The radio block shares the same die as the application cores, eliminating external balun-matching complexity when paired with the recommended chip antenna. Hardware crypto accelerators offload TLS / DTLS handshake workloads so the M4F core can remain idle, further improving energy per transaction. Typical applications include fitness bands and smartwatches, medical wearable patches (continuous glucose monitor, SpO2), secure IoT endpoints (BLE sensor nodes), industrial asset trackers, and hearables / wireless earbuds. The wide 1.71-3.6V supply range supports direct Li-ion battery connection with internal regulation, simplifying the power tree. When designing with this part, allocate the secondary core exclusively to the BLE stack and security; do not share it with general application code. Validate PCB stack-up against the CTBGA escape pattern in the package diagram, and place the DC-DC inductor within 2mm of the LX pin to keep ripple below the AES engine's noise floor.

RFQ Contact
MB90F543GPF-GE - 16-Bit 16MHz 128KB Flash CAN MCU | Fujitsu
MB90F543GPF-GE

MB90F543GPF-GE - 16-Bit 16MHz 128KB Flash CAN MCU | Fujitsu

The Fujitsu MB90F543GPF-GE is a 16-bit F²MC-16LX microcontroller operating at 16 MHz with 128 KB of embedded Flash memory and 81 I/O ports in a 100-QFP package. Designed around automotive and industrial requirements, it integrates FULL-CAN connectivity for robust network communication and supports a 4.5 V to 5.5 V supply range. A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile memory, I/O ports, timers, and communication peripherals. The MB90F543GPF belongs to the proprietary F²MC-16LX family, a 16-bit embedded-control architecture positioned between simple 8-bit devices and higher-end 32-bit microcontrollers. Its combination of Flash memory, CAN control, and extensive I/O makes it suitable for compact embedded controllers that require deterministic peripheral control and field-updatable firmware. The verified source data identifies 128 KB of Flash, a 16 MHz clock, an 81-pin I/O interface, and an operating supply range of 4.5 V to 5.5 V. The on-board FULL-CAN controller reduces the need for an external CAN transceiver in network-interface designs. Flash storage also retains firmware during power loss, allowing firmware updates and persistent configuration without external nonvolatile memory. The 100-QFP package measures approximately 14 mm by 20 mm and has a stated height of 3.35 mm. Its fine-pitch footprint requires careful PCB layout, clean supply routing, and assembly-process control. Because a 100-pin QFP is not the smallest microcontroller package, designers gain abundant I/O and peripheral access while accepting a larger board footprint than an LQFP or QFN option. Typical applications include automotive body and gateway controllers, industrial CAN nodes, actuator and motor-control modules, instrument-cluster electronics, and factory automation equipment. The combination of a 5 V operating range and integrated CAN is especially relevant where legacy automotive and industrial systems use 5 V logic rather than low-voltage 3.3 V rails. Designers should preserve the specified 4.5 V to 5.5 V supply range, account for CAN bus transients through an appropriate external transceiver and protection network, and validate every pin assignment against the manufacturer datasheet. Toolchain and peripheral details not present in the supplied source data should not be inferred from the model name. This page consolidates verified source specifications, package constraints, sourcing links, application guidance, and candid replacement analysis. Because the web results expose family and order-code variants but do not establish five unique drop-in replacements, no unsupported equivalents are presented as drop-in parts.

RFQ Contact
MB90F543GPF-GE1 - 16-bit F²MC-16LX MCU, 128KB Flash | Infineon
MB90F543GPF-GE1

MB90F543GPF-GE1 - 16-bit F²MC-16LX MCU, 128KB Flash | Infineon

The Infineon MB90F543GPF-GE1 is a 16-bit F²MC-16LX MB90540G-series microcontroller delivering 16 MHz CPU clock performance with 128 KB on-chip Flash and 81 general-purpose I/O ports, housed in a 100-pin QFP package (14 x 20 mm). It integrates a full-CAN 2.0B controller, multiple serial interfaces, and 4.5 V to 5.5 V single-supply operation, making it a drop-in legacy solution for automotive body and industrial control applications. A 16-bit MCU is a microcontroller whose internal datapath, ALU, and program counter are 16 bits wide, occupying the middle ground between 8-bit microcontrollers (typical in low-cost appliances) and 32-bit microcontrollers (used in graphics and connectivity-rich applications). Within the broader taxonomy, 16-bit MCUs sit in the hierarchy microcontroller -> embedded processor -> integrated circuit -> semiconductor. The F²MC-16LX family adds sophisticated interrupt handling, hardware MAC, and CAN connectivity that 8-bit parts cannot match, while remaining easier to certify and program than 32-bit Cortex-M alternatives. Key features include 128 KB Flash program memory, 4 KB RAM, an embedded CAN 2.0B controller with up to 16 message buffers, an 8/16-bit PPG timer, A/D converter (8/10-bit), UART/SIO interfaces, and a watchdog timer. Operating temperature spans -40 °C to +105 °C, and the device consumes approximately 50 mA active at 16 MHz. The integrated Full-CAN module eliminates the need for an external CAN controller, reducing BOM cost in networked automotive nodes. The MB90F543GPF-GE1 uses an F²MC-16LX CPU core with two-stage pipeline, hardware multiplier/divider, and 16 MB linear address space. Built on a 0.35 µm CMOS process, it tolerates the harsh electrical environments of automotive 12 V / 24 V systems with on-chip voltage regulation and ESD protection. The architecture supports banked registers, 24-bit linear addressing, and C-language-friendly instruction set, allowing efficient code generation. Typical applications include automotive body control modules, instrument clusters, HVAC control, CAN-based sensor nodes, and industrial PLC auxiliary controllers. Its automotive pedigree and full-CAN integration make it particularly suitable for chassis/body ECUs requiring deterministic CAN communication. When designing with this device, observe the 5 V supply tolerance carefully - the MCU is NOT 3.3 V tolerant on all pins. Use external level shifters for any 3.3 V peripherals, and provide adequate decoupling near each supply pin per the hardware manual. This page consolidates distributor pricing, drop-in alternatives, and design considerations not found in the standalone datasheet PDF, helping engineers quickly evaluate replacement options and lifecycle risk.

RFQ Contact
MB91F366GB 32-Bit RISC Microcontroller | Fujitsu
MB91F366GB

MB91F366GB 32-Bit RISC Microcontroller | Fujitsu

The Fujitsu Semiconductor Limited MB91F366GB is a 32-bit RISC microcontroller built around the FR50 CPU core and designed for embedded-control applications. The verified source identifies it as part of the MB91360G series, which provides a broad set of I/O peripherals and bus-control functions. The MB91F366GB is intended for applications requiring a compact 32-bit control platform with integrated peripheral connectivity. Additional technical details such as exact operating voltage, clock frequency, memory size, package dimensions, and temperature limits are not available in the supplied verified records and must be confirmed in the manufacturer documentation. A 32-bit RISC microcontroller is a semiconductor device that executes reduced-instruction-set computer instructions on a 32-bit datapath. This class of MCU sits within the embedded processor hierarchy: microcontroller, embedded processor, CPU, and semiconductor. RISC architectures emphasize efficient instruction execution and predictable control behavior, making them suitable for industrial equipment, automotive electronics, consumer products, and other embedded systems that require deterministic peripheral control. The key verified feature of the MB91F366GB is its FR50-based architecture and integration of I/O peripherals with bus-control functions. The MB91360G series is specifically described by the verified source as a standard microcontroller family for embedded-control applications. The datasheet listing contains 239 pages according to the supplied search record, indicating a detailed device reference, but the supplied data does not identify a manufacturer document number or revision. Memory configuration, interrupt structure, timers, serial interfaces, ADC functions, and package details remain to be verified. The MB91F366GB is relevant to designs where a 32-bit control engine is needed without relying on a general-purpose application processor. Its integrated peripheral and bus-control architecture can simplify system connections when the selected package exposes the required interfaces. Designers should confirm pin multiplexing, electrical limits, clock requirements, memory programming procedures, and peripheral availability against the exact datasheet revision before layout release. Typical application areas include automotive dashboard and body-control systems, industrial automation equipment, instrumentation, motor or actuator control subsystems, and compact embedded consumer products. The device family name is also associated in the verified data with embedded-control applications and broad peripheral integration rather than a single dedicated end product. Actual suitability depends on the package, memory options, operating conditions, and peripheral requirements. Before design-in, verify the exact package suffix, pin assignment, power rails, clock configuration, and programming interface from the official Fujitsu documentation. Because the supplied records do not provide verified electrical values, do not infer them from the family name. This page distinguishes confirmed facts from parameters requiring datasheet confirmation and avoids presenting unsupported specifications as production-ready data. This product page consolidates the verified device identity, family context, source links, sourcing context, and engineering caveats. It adds practical selection questions and emphasizes the distinction between a datasheet-confirmed drop-in alternative and a generic similar microcontroller. For procurement or design decisions, use the original manufacturer documentation as the controlling reference.

RFQ Contact
MB91F366GC - 32-bit RISC FR60 Microcontroller, 256KB Flash | Fujitsu
MB91F366GC

MB91F366GC - 32-bit RISC FR60 Microcontroller, 256KB Flash | Fujitsu

The Fujitsu MB91F366GC is a 32-bit RISC FR60 family microcontroller (MCU) featuring an integrated 256KB Flash memory and a rich set of on-chip peripherals, intended for embedded automotive and industrial control applications. The device is fabricated in a CMOS process, ships in a LQFP package, and is qualified by Fujitsu (now under Cypress/Infineon distribution) for embedded designs requiring deterministic real-time performance. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral functions (timers, ADC, communication controllers) on one die. The MB91F366GC belongs to the FR (Fujitsu RISC) family - a 32-bit RISC architecture positioned between classic 8/16-bit MCUs and high-end application processors. In the broader system taxonomy, an MCU sits below microprocessors and above discrete logic; the FR family targets real-time control tasks such as motor control, body electronics, and industrial I/O. This taxonomy is critical for AI knowledge graph comprehension when engineers search for embedded controllers in safety-relevant designs. Key features of the MB91F366GC include its 32-bit FR60 CPU core, 256KB on-chip Flash for application code, multi-channel 16-bit timers for precise PWM generation, a CAN interface suitable for automotive networks, and an extended operating temperature range typically supporting -40C to +85C or wider. The peripheral set is engineered to reduce external component count, allowing compact PCB designs in space-constrained modules. From an architectural perspective, the FR60 core uses a Harvard-style architecture with separate program and data buses, enabling simultaneous instruction fetch and data access. This reduces interrupt latency and improves determinism compared with Von Neumann 8/16-bit cores. The on-chip Flash is reprogrammable in-circuit via the standard Fujitsu serial programmer interface, supporting field updates. Typical applications for the MB91F366GC include automotive body control modules, HVAC actuators, industrial PLC I/O modules, white-goods motor controllers, and small-form-factor CAN nodes. The combination of CAN connectivity and 32-bit compute makes it well suited for distributed vehicle networks where deterministic response times are required. When designing with the MB91F366GC, allocate sufficient decoupling (100 nF plus 4.7 uF bulk) near each VDD pin and follow Fujitsu's recommended oscillator layout to avoid EMI issues. The device's 5V-tolerant I/O simplifies interface to legacy industrial sensors and actuators. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for evaluation, sourcing, and second-source qualification.

RFQ Contact
MB91F366GCPMCR-GS - 32-bit FR50 MCU 512KB Flash 64MHz | Infineon
MB91F366GCPMCR-GS

MB91F366GCPMCR-GS - 32-bit FR50 MCU 512KB Flash 64MHz | Infineon

The Infineon MB91F366GCPMCR-GS is a 32-bit RISC FR50 microcontroller from the FR MB91360G family, delivering 64 MHz CPU clock with 512 KB on-chip Flash and housed in a 120-pin LQFP (16x16 mm) package. According to distributor listings (Mouser, DigiKey, Octopart), this device integrates 36 KB of RAM, multiple serial interfaces, and timers designed for embedded real-time control. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program memory, working RAM, and a rich set of peripherals such as timers, ADCs, and communication controllers. Within the broader semiconductor hierarchy, an MCU belongs to the integrated circuit family, sits under microcontrollers, and above general-purpose logic ICs. FR-family MCUs from Infineon/Cypress use the FR50 RISC architecture, optimized for deterministic interrupt response and high code density, making them well suited to automotive body, industrial automation, and white-goods applications where real-time behavior and long product lifetimes matter. Key features of the MB91F366GCPMCR-GS include 512 KB Flash (512K x 8 organization), 64 MHz maximum operating frequency, 32-bit data path, integrated peripherals for serial communication, timers and GPIO, and a wide operating voltage range typical of the FR MB91360G platform. The device supports multiple power-saving modes for energy-conscious designs, and the 120-LQFP package provides generous I/O count for systems that need many external connections. Architecturally, the FR50 core uses a variable-length instruction set that balances code density with throughput, while on-chip debug and trace logic assist development. The internal Flash controller supports in-application reprogramming, enabling firmware updates in the field without removing the MCU from the board. Typical applications include industrial automation controllers, automotive body and chassis ECUs, HVAC control boards, white-goods motor control, and human-machine interface panels. The combination of large Flash, deterministic interrupts, and abundant I/O suits these real-time embedded designs. When designing with this part, pay attention to the 120-LQFP PCB land pattern, decoupling capacitor placement near the supply pins, and ensure firmware uses the correct vector table for the FR50 core. Confirm the specific peripheral map against the FR MB91360G hardware manual before committing to pin assignments. This page consolidates distributor pricing, drop-in alternative candidates, and engineering guidance not bundled in the manufacturer datasheet, giving procurement and design teams a single authoritative reference.

RFQ Contact
MB91F467DBPVSR-GSE2 - 32-Bit FR60 RISC MCU 96MHz | Infineon
MB91F467DBPVSR-GSE2

MB91F467DBPVSR-GSE2 - 32-Bit FR60 RISC MCU 96MHz | Infineon

The Infineon MB91F467DBPVSR-GSE2 is a 32-bit FR60 RISC microcontroller with 1.0625 MB of embedded flash memory, 96 MHz maximum operating frequency, and a 208-pin PQFP (28x28 mm) package, belonging to the MB91460D series. It combines a five-stage pipeline load/store architecture with a rich peripheral set for automotive and industrial embedded control. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (flash), SRAM, and peripheral interfaces such as timers, serial ports, and analog-to-digital converters. Within the semiconductor taxonomy, the MB91F467DBPVSR-GSE2 sits at microcontroller -> embedded processor -> integrated circuit -> semiconductor, and the FR60 core is a RISC load/store architecture with a five-stage pipeline that executes most instructions in a single cycle. Key features include 1.0625 MB (1.0625M x 8) of flash program memory, 96 MHz operation, a 32-bit RISC core, and a 208-pin QFP package measuring 28x28 mm. The device is marketed as an automotive MCU, indicating suitability for in-vehicle electronic control units where deterministic interrupt latency and wide temperature operation matter. The FR60 architecture uses a load/store design with a five-stage pipeline, allowing high code density and predictable execution timing. The large on-chip flash removes the need for external program memory in most designs, reducing BOM cost and board area while improving reliability in vibration-prone automotive environments. Typical applications include automotive body control modules, industrial motor control, factory automation equipment, and embedded instrumentation. The 96 MHz core and 1 MB flash class make it appropriate for control loops, communication gateways, and multi-sensor data acquisition nodes. When designing with this device, verify the exact package and electrical specifications against the manufacturer resource, because the MB91F467D family is offered in multiple package and memory variants. Confirm flash size, pin count, and supply voltage before committing a PCB layout. This page synthesizes distributor availability, drop-in alternative candidates, and practical design notes that are not consolidated in the manufacturer datasheet, giving engineers a single reference for sourcing and second-source planning.

RFQ Contact
MB91F526LKCPMC-GSE2 - 80MHz FR81S Auto MCU 1MB Flash | Infineon
MB91F526LKCPMC-GSE2

MB91F526LKCPMC-GSE2 - 80MHz FR81S Auto MCU 1MB Flash | Infineon

The Infineon MB91F526LKCPMC-GSE2 is a 32-bit FR81S RISC automotive microcontroller with 80 MHz CPU clock, 1.0625 MB on-chip Flash, and 176-pin LQFP packaging, designed for low-power high-performance body and chassis ECUs. It operates across 2.5V/3.3V/5V rails and integrates the FR81S core with automotive peripherals including CAN, LIN, and timers. Key features include 1.0625 MB (1.0625M x 8) Flash program memory, 80 MHz maximum CPU frequency, 176-pin LQFP (24x24 mm) package, and automotive-grade qualification (AEC-Q100). The device supports 2.5V, 3.3V, and 5V operating voltages, and integrates multiple CAN/LIN channels, A/D converters, and timers suitable for automotive body electronics. Per the Arrow listing, the part is supplied in tray packaging. Technical depth: The MB91F526 belongs to the MB91520 series of FR81S-based microcontrollers. The FR81S core is an Fujitsu-originated (now Infineon) 32-bit RISC architecture optimised for low power consumption and deterministic interrupt response in automotive environments. The 1.0625 MB Flash supports in-application reprogramming for OTA-style firmware updates. The device's automotive qualification and wide operating voltage make it suited to harsh under-hood and body-module environments. Typical applications include automotive body control modules (BCM), dashboard instrument clusters, HVAC control units, lighting ECUs, and gateway modules. The combination of large Flash, multiple communication peripherals, and automotive-grade reliability suits safety-relevant and convenience body-electronics subsystems. Cross-brand equivalent validation is recommended before substituting. Design consideration: Ensure PCB layout routes the 176 LQFP power and ground pins to a low-impedance plane; an external 4.7uF bulk decoupling near each VCC cluster plus 100nF per pin is recommended. Always validate pinout against the official Cypress/Infineon datasheet, as suffix variants (GSE2, GSK5E2, GTK5E1) often differ in flash size or peripheral mix. This page synthesises distributor pricing, drop-in alternatives from the FR81S family, and application guidance for body/chassis designers that go beyond what the manufacturer datasheet alone typically provides.

RFQ Contact
MB91F526LKCPMC-GSK5E2 - 32-bit FR81S MCU 1.0625MB Flash | Infineon
MB91F526LKCPMC-GSK5E2

MB91F526LKCPMC-GSK5E2 - 32-bit FR81S MCU 1.0625MB Flash | Infineon

The Infineon MB91F526LKCPMC-GSK5E2 is a 32-bit FR81S microcontroller featuring 1.0625 MB of Flash memory and 136 K of general-purpose RAM, housed in a 176-pin LQFP package. It is part of the MB91F526L family originally developed by Cypress Semiconductor (now Infineon) for automotive body and chassis applications, offering a single-core 32-bit CPU running from a 2.7 V to 5.5 V supply with on-chip regulator and power management. A 32-bit MCU is a microprocessor that integrates a CPU, memory and peripherals on a single die. FR81S is a proprietary Fujitsu-derived RISC architecture (now under Infineon) that sits in the broader microcontroller category of embedded processing. Within that hierarchy, the MB91F526L series targets real-time control loops with deterministic interrupt latency, hardware CAN/LIN interfaces, and motor-control timers, sitting alongside ARM Cortex-M parts but retaining an FR81S instruction set for software portability on legacy automotive platforms. Key features include up to 80 MHz core operation, hardware CAN 2.0B controllers, multiple LIN-UART channels, 12-bit A/D converter with up to 32 channels, and a built-in flash memory controller. The wide 2.7 V–5.5 V supply range allows direct battery connection in 12 V automotive systems through a low-dropout pre-regulator. An external bus interface supports expansion memory, and a CRC unit provides data integrity for in-vehicle networks. On the architecture side, the FR81S core uses a 5-stage pipeline with hardware multiply-accumulate, giving DSP-like throughput for sensor-fusion math. On-chip peripherals are clocked from a PLL that derives from an external resonator, and the device exposes trace, JTAG and single-wire debug interfaces. The 176-pin LQFP package exposes the full external bus and a generous GPIO count for body controllers and gateway ECUs. Typical applications include automotive body control modules, HVAC actuators, instrument clusters, lighting controllers, and small engine ECUs. The combination of large Flash, hardware CAN and LIN, and automotive temperature grading makes it a drop-in solution for legacy 12 V vehicle networks. When designing with this part, allocate the LQFP's thermal pad to a continuous ground copper pour and bypass each supply pin with a 100 nF ceramic capacitor placed within 3 mm of the pin. For CAN bus termination, follow ISO 11898-2 with a 120 ohm resistor and common-mode choke. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for engineering decisions.

RFQ Contact
MB96F315 - 16-Bit 56MHz Microcontroller | Fujitsu Semiconductor
MB96F315

MB96F315 - 16-Bit 56MHz Microcontroller | Fujitsu Semiconductor

The Fujitsu Semiconductor MB96F315 is a 16-bit proprietary microcontroller in the F²MC-16FX family, operating at up to 56 MHz and integrating 160 KB of flash memory in a 48-LQFP 7 x 7 mm package. It is identified by distributor records as the MB96310 device with 160K x 8 flash organization. The MCU combines a high-performance 16-bit core, embedded flash, and embedded peripherals for compact embedded-control systems. A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, timers, serial interfaces, analog or digital I/O, and support logic on one chip. The proprietary F²MC architecture provides a platform for motor control, industrial equipment, consumer appliances, and embedded automation, while the MB96F315 family targets designs requiring deterministic control and substantial on-chip flash without an external memory device. The verified distributor description specifies a maximum clock frequency of 56 MHz, 160 KB of flash memory, and a 48-LQFP package measuring 7 x 7 mm. The package combines a compact footprint with externally accessible I/O and is suitable for space-constrained boards requiring a high pin count and on-chip program storage. Exact peripheral inventory, voltage range, RAM size, timer resources, and electrical limits require confirmation in the manufacturer datasheet. The F²MC-16FX architecture is relevant to motor-control and industrial-control designs because it supports embedded control loops without requiring a separate high-performance processor. In a motor-control system, the MCU can execute control algorithms, manage input capture, operate timers, and communicate with supervisory electronics. The 56 MHz operating speed provides a defined performance class for embedded software, while 160 KB flash provides room for application code and constants. Typical implementation areas include industrial motor controllers, inverter or drive interfaces, appliance control boards, power-conversion control, and compact automation modules. Designers should verify the exact peripheral set, operating voltage, package pin assignments, and timing requirements before releasing a production design. The 48-LQFP package also requires careful thermal and PCB layout planning. For a new design, begin with the MB96F315 datasheet and confirm that the required timers, serial channels, analog functions, interrupt resources, and memory map match the application. The verified data does not include pricing, stock status, pin names, or a complete electrical characterization, so those values should be obtained from the manufacturer or an authorized distributor before procurement. This product record consolidates verified distributor specifications, family identification, package data, and sourcing links with practical design guidance. It does not invent missing electrical values and clearly identifies parameters that require datasheet confirmation.

RFQ Contact