Products (21,000+)

MC9S08SH16CTJ - 8-bit MCU, 16KB Flash, 40MHz | NXP
MC9S08SH16CTJ

MC9S08SH16CTJ - 8-bit MCU, 16KB Flash, 40MHz | NXP

The NXP Semiconductors MC9S08SH16CTJ is an 8-bit S08-family microcontroller unit (MCU) with 16KB of flash program memory, 512B of RAM, and a maximum bus clock of 40 MHz, supplied in a 20-pin TSSOP package. It operates from a 2.7V to 5.5V supply across a -40C to +85C temperature range, making it suited to 5-volt industrial and automotive-adjacent designs. An 8-bit MCU is a single-chip computer whose CPU processes data 8 bits at a time. Within the embedded systems hierarchy, the S08 family sits under NXP's (formerly Freescale Semiconductor's) HC08/HCS08 lineage of CISC microcontrollers, which in turn belong to the broader class of microcontroller units - devices integrating a processor core, memory, and peripherals on one die. The S08SH series is positioned as a low-cost, low-pin-count option for classic 5V applications. Key features include the HCS08 core executing the HC08 instruction set plus the added BGND instruction, a 12-channel 10-bit ADC, and connectivity peripherals comprising I2C, LIN, SCI, and SPI. On-chip system protections include a low-voltage detector (LVD), power-on reset (POR), pulse-width modulation (PWM) capability, and a watchdog timer (WDT), with support for up to 32 interrupt/reset sources. The device provides 17 general-purpose I/O lines. Architecturally, the S08 core is an enhanced HC08 CPU with improved interrupt handling and background debug mode (BGND) support, allowing non-intrusive flash programming and debugging through NXP's background debug controller. Flash memory is in-circuit erasable and programmable, simplifying field updates. The 5V-tolerant operating range differentiates the SH family from many modern 3.3V-only MCUs, allowing direct interface with legacy 5V sensors and industrial signaling. Typical applications include small appliance control, automotive body accessories, motor and LED control nodes, LIN-bus slave modules, and 5V industrial sensor transmitters - anywhere a compact, low-pin-count, flash-based 8-bit controller with an integrated 10-bit ADC is required. For design, take advantage of the wide 2.7V to 5.5V supply range but verify ADC reference stability across supply variation; use the internal LVD and watchdog for unattended reliability, and observe proper decoupling on the 20-TSSOP supply pins. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design guidance not found in the manufacturer datasheet alone.

RFQ Contact
MC9S08SH16CTL - 40MHz 16KB 8-Bit MCU | NXP | Automotive (Tape & Reel)
MC9S08SH16CTL

MC9S08SH16CTL - 40MHz 16KB 8-Bit MCU | NXP | Automotive (Tape & Reel)

The NXP Semiconductors MC9S08SH16CTL is an 8-bit S08 CISC microcontroller rated up to 40 MHz, with 16 KB of flash memory, 1 KB of RAM, and 23 general-purpose I/O pins in a 28-pin TSSOP tape-and-reel package. It operates from a 2.7 V to 5.5 V supply range and targets compact embedded-control and automotive applications. A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O, analog conversion, communications peripherals, and debug support on one device. The MC9S08SH16CTL belongs to the HCS08 family and its 8-bit CISC architecture provides straightforward embedded-control processing. The device supports up to 32 interrupt or reset sources, making it suitable for responsive event-driven systems. Key features include a 40-MHz HCS08 central processing unit, 16 KB of internal flash, 1 KB of RAM, and a 10-bit analog-to-digital converter. Available communication and control resources cited by the supplied data include SCI, SPI, and IIC interfaces. A 23-I/O count supports external sensors, indicators, actuators, and control signals, while the internal oscillator eliminates a mandatory external clock source. The MCU is used where moderate computation, memory, and serial connectivity are needed without a higher-cost processor. Its 2.7 V to 5.5 V supply range accommodates common embedded rails, and the 28-pin TSSOP package provides a board-compatible surface-mount footprint. Reported converter details vary among supplied search snippets, so channel count and conversion timing must be confirmed against the manufacturer datasheet before a safety- or timing-critical design is released. Typical uses include automotive body and control modules, compact sensor interfaces, small motor-control boards, industrial controls, and communication hubs. Its SCI, SPI, and IIC peripherals allow connection to transceivers, sensors, memory, and other controllers without requiring several external interface devices. Designers should preserve the 28-pin footprint, confirm every peripheral mapping against the datasheet, and include adequate decoupling and signal-integrity practices. The supplied data does not establish complete pin assignments, electrical limits, timing values, or automotive qualification status, so those items must not be inferred from generic family information. This page consolidates the supplied manufacturer and distributor results, separates verified facts from unresolved details, and adds procurement, comparison, and design guidance not presented as a single source in the manufacturer datasheet.

RFQ Contact
MC9S08SH16CTLR - 40MHz 16KB 8-Bit MCU | NXP | Automotive
MC9S08SH16CTLR

MC9S08SH16CTLR - 40MHz 16KB 8-Bit MCU | NXP | Automotive

The NXP Semiconductors MC9S08SH16CTLR is an 8-bit S08 CISC microcontroller rated up to 40 MHz, with 16 KB of flash memory, 1 KB of RAM, and 23 general-purpose I/O pins in a 28-pin TSSOP tape-and-reel package. It operates from a 2.7 V to 5.5 V supply range and targets compact embedded-control and automotive applications. A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O, analog conversion, communications peripherals, and debug support on one device. The MC9S08SH16CTLR belongs to the HCS08 family and its 8-bit CISC architecture provides straightforward embedded-control processing. The device supports up to 32 interrupt or reset sources, making it suitable for responsive event-driven systems. Key features include a 40-MHz HCS08 central processing unit, 16 KB of internal flash, 1 KB of RAM, and a 10-bit analog-to-digital converter. Available communication and control resources cited by the supplied data include SCI, SPI, and IIC interfaces. A 23-I/O count supports external sensors, indicators, actuators, and control signals, while the internal oscillator eliminates a mandatory external clock source. The MCU is used where moderate computation, memory, and serial connectivity are needed without a higher-cost processor. Its 2.7 V to 5.5 V supply range accommodates common embedded rails, and the 28-pin TSSOP package provides a board-compatible surface-mount footprint. Reported converter details vary among supplied search snippets, so channel count and conversion timing must be confirmed against the manufacturer datasheet before a safety- or timing-critical design is released. Typical uses include automotive body and control modules, compact sensor interfaces, small motor-control boards, industrial controls, and communication hubs. Its SCI, SPI, and IIC peripherals allow connection to transceivers, sensors, memory, and other controllers without requiring several external interface devices. Designers should preserve the 28-pin footprint, confirm every peripheral mapping against the datasheet, and include adequate decoupling and signal-integrity practices. The supplied data does not establish complete pin assignments, electrical limits, timing values, or automotive qualification status, so those items must not be inferred from generic family information. This page consolidates the supplied manufacturer and distributor results, separates verified facts from unresolved details, and adds procurement, comparison, and design guidance not presented as a single source in the manufacturer datasheet.

RFQ Contact
MC9S08SH16CWL - 8-Bit 40MHz 16KB Flash MCU | NXP (Tape & Reel)
MC9S08SH16CWL

MC9S08SH16CWL - 8-Bit 40MHz 16KB Flash MCU | NXP (Tape & Reel)

NXP Semiconductors MC9S08SH16CWL is an 8-bit S08 microcontroller with a 40 MHz HCS08 core, 16KB of flash program memory, 1KB of RAM, and a 28-pin SOIC package. It supports 3.3 V and 5 V operation and is identified in the verified distributor data as an obsolete part. The S08 is an 8-bit CISC microcontroller family intended for embedded control applications where low cost, compact size, and integrated peripherals are important. This part combines a 40 MHz CPU core with flash memory, RAM, serial interfaces, timers, pulse-width modulation, watchdog and reset supervision, and a multichannel ADC. Its 23 I/O pins provide access to the integrated peripherals in a single package. Verified specifications identify a 40 MHz operating speed, 16KB (16K x 8) flash memory, 1K x 8 RAM, 23 I/O pins, and an internal oscillator. The device supports I2C, LINbus, SCI, and SPI connectivity according to the supplied component listing. Its 16-channel ADC provides 10-bit resolution, while the listed peripheral set includes low-voltage detection, power-on reset, PWM, and a watchdog timer. The 28-pin SOIC package is approximately 7.50 mm wide and 0.295 inch long according to the verified specification snippet. The listed operating voltage options are 3.3 V and 5 V. The MC9S08SH16CWL is suitable for compact embedded systems, low-cost control products, sensor interfaces, actuator controllers, and serial-connected industrial equipment where an 8-bit architecture and integrated peripherals are sufficient. A key sourcing consideration is lifecycle status. The supplied PDF source lists the part as obsolete, while distributor pages provide product information and ordering links. Engineers should confirm availability, remaining supply, and any authorized-source restrictions before beginning a new design. A replacement should be verified for pinout, memory size, voltage range, peripheral compatibility, clock requirements, and software support. The most important design step for a redesign is to treat software migration as part of the replacement assessment. A device with the same package name may differ in flash capacity, peripheral mapping, interrupt behavior, or clock configuration. This page consolidates the verified source specifications, lifecycle information, package identity, sourcing limitations, and drop-in alternatives while distinguishing confirmed data from information that still requires engineering validation.

RFQ Contact
MC9S08SH16CWLR - 8-Bit 40MHz 16KB Flash MCU | NXP
MC9S08SH16CWLR

MC9S08SH16CWLR - 8-Bit 40MHz 16KB Flash MCU | NXP

NXP Semiconductors MC9S08SH16CWLR is an 8-bit S08 microcontroller with a 40 MHz HCS08 core, 16KB of flash program memory, 1KB of RAM, and a 28-pin SOIC package. It supports 3.3 V and 5 V operation and is identified in the verified distributor data as an obsolete part. The S08 is an 8-bit CISC microcontroller family intended for embedded control applications where low cost, compact size, and integrated peripherals are important. This part combines a 40 MHz CPU core with flash memory, RAM, serial interfaces, timers, pulse-width modulation, watchdog and reset supervision, and a multichannel ADC. Its 23 I/O pins provide access to the integrated peripherals in a single package. Verified specifications identify a 40 MHz operating speed, 16KB (16K x 8) flash memory, 1K x 8 RAM, 23 I/O pins, and an internal oscillator. The device supports I2C, LINbus, SCI, and SPI connectivity according to the supplied component listing. Its 16-channel ADC provides 10-bit resolution, while the listed peripheral set includes low-voltage detection, power-on reset, PWM, and a watchdog timer. The 28-pin SOIC package is approximately 7.50 mm wide and 0.295 inch long according to the verified specification snippet. The listed operating voltage options are 3.3 V and 5 V. The MC9S08SH16CWLR is suitable for compact embedded systems, low-cost control products, sensor interfaces, actuator controllers, and serial-connected industrial equipment where an 8-bit architecture and integrated peripherals are sufficient. A key sourcing consideration is lifecycle status. The supplied PDF source lists the part as obsolete, while distributor pages provide product information and ordering links. Engineers should confirm availability, remaining supply, and any authorized-source restrictions before beginning a new design. A replacement should be verified for pinout, memory size, voltage range, peripheral compatibility, clock requirements, and software support. The most important design step for a redesign is to treat software migration as part of the replacement assessment. A device with the same package name may differ in flash capacity, peripheral mapping, interrupt behavior, or clock configuration. This page consolidates the verified source specifications, lifecycle information, package identity, sourcing limitations, and drop-in alternatives while distinguishing confirmed data from information that still requires engineering validation.

RFQ Contact
MC9S08SH16MTJ - 8-bit MCU 16KB Flash 40MHz | NXP Semiconductors
MC9S08SH16MTJ

MC9S08SH16MTJ - 8-bit MCU 16KB Flash 40MHz | NXP Semiconductors

The NXP Semiconductors MC9S08SH16MTJ is an 8-bit S08-family microcontroller unit (MCU) with 16 KB of flash memory, a maximum CPU clock of 40 MHz, and a wide 2.7V to 5.5V supply range, housed in a 20-pin TSSOP package. It is positioned as a low-end, 5-volt-oriented option for cost-sensitive and automotive-grade embedded designs. An 8-bit microcontroller is a single-chip computer integrating a processor core, program memory, data memory, and peripherals on one die. Within the power-management and control hierarchy of embedded systems, MCUs such as the S08SH sit below 16/32-bit application processors and above discrete logic, handling sensing, timing, and actuation tasks in end products. The S08SH family is NXP's (formerly Freescale Semiconductor) entry-level series for 5V-range applications. Key features of the MC9S08SH16MTJ include an HCS08 CISC core executing the HC08 instruction set with an added BGND instruction, a 16-channel 10-bit ADC with 2.x mode conversion support, and support for up to 32 interrupt/reset sources. Single-wire background debug interfacing and an on-chip ICE debug module with two comparators and nine trigger modes simplify development without additional debug silicon. Technically, the device combines the S08 core with 16 KB (16K x 8) of on-chip flash program memory. The debug module includes an eight-deep FIFO for storing change-of-flow address and event-only data, while breakpoint capability permits single-breakpoint in-circuit debugging plus two additional breakpoints in the on-chip debug module. The automotive temperature grade supports operation from -40C to +125C. Typical applications include automotive body and comfort electronics, 5V industrial sensors and actuators, appliance control boards, and low-cost battery-monitoring nodes, where a wide 2.7V-5.5V supply range removes the need for a dedicated 3.3V regulator. Design consideration: this part is End-of-Life per the NXP product page, so new designs should favor the MC9S08SH32 or S9S08SG16 family members, and existing designs should verify last-time-buy schedules with distributors. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes not found in the manufacturer datasheet, with pricing freshness as of 2026-10-18.

RFQ Contact
MC9S08SH16MTJR - 8-bit S08 MCU, 16KB Flash, 40MHz, 20-TSSOP | NXP
MC9S08SH16MTJR

MC9S08SH16MTJR - 8-bit S08 MCU, 16KB Flash, 40MHz, 20-TSSOP | NXP

The NXP MC9S08SH16MTJR is an 8-bit S08 CISC microcontroller with 16 KB of on-chip Flash memory, 1 KB of RAM, and a 40 MHz maximum CPU clock, housed in a 20-pin TSSOP package on tape-and-reel. It integrates a 16-channel 10-bit ADC, analog comparators, and a configurable peripheral set including PWM, LVD, POR, and WDT, with 17 GPIO-capable pins. The on-chip analog and serial peripherals (SCI, SPI, I2C, and LINbus) suit it to appliance, automotive body, and industrial control applications where 5V-tolerant I/O is needed. An 8-bit microcontroller (MCU) is a processor optimized for cost-sensitive embedded control tasks, integrating the CPU, non-volatile program memory, data RAM, and peripherals on one die. The S08 family is built on an enhanced 8-bit CISC core, sitting at the lowest tier of the embedded-control hierarchy: microcontroller -> embedded processor -> semiconductor device. Within NXP's broader portfolio, the S08SH series targets space-constrained, low-power, mixed-signal designs that benefit from a 5V-tolerant supply. Key features for designers include 16 KB Flash and 1 KB RAM for application code and data, 17 GPIO lines with interrupt capability, a 16-channel 10-bit ADC for analog sensing, and four communication peripherals (SCI, SPI, I2C, and LINbus) for inter-chip and automotive networks. A programmable timer/PWM block, hardware watchdog (WDT), and low-voltage detect (LVD) round out the embedded control peripherals. The 40 MHz bus and 20 MHz core performance per the NXP overview page, with 5V-tolerant I/O that simplifies interfaces to legacy 5V sensors. The MC9S08SH16MTJR uses NXP's S08 CISC core and an HCS08 instruction set, supports single-wire background debug mode (BDM) and on-chip in-circuit emulation, and operates across 2.7V to 5.5V supply. Programming is supported by the standard NXP/Freescale CodeWarrior and S08 toolchain via the BDM interface. The 20-pin TSSOP package provides a small footprint suitable for high-density PCB designs, while the wide supply range and internal clock options reduce BOM cost. Typical applications include automotive body electronics (LIN nodes, seat controllers, mirror modules), home appliances (washing machines, HVAC controls, induction cooktops), industrial sensors and small motor drivers, battery management accessories, and general-purpose 5V-tolerant logic replacement. The device is also commonly used in education and rapid-prototyping boards due to its accessible BDM and small pin count. When designing with this MCU, note that the 20-pin TSSOP package limits GPIO to 17 lines; plan pinout carefully and consider migrating to the 28-pin or 32-pin QFP variants if more I/O is needed. Plan Flash/RAM partitioning carefully because 1 KB of RAM restricts stack/data buffer depth for complex protocols. This page synthesizes NXP product page specifications, 4-distributor pricing snapshots, drop-in alternative cross-references, and practical design notes not collated in any single manufacturer document.

RFQ Contact
MC9S08SH16MTL - 16KB 40MHz 8-Bit MCU | NXP Semiconductors
MC9S08SH16MTL

MC9S08SH16MTL - 16KB 40MHz 8-Bit MCU | NXP Semiconductors

The NXP Semiconductors MC9S08SH16MTL is an 8-bit S08 CISC microcontroller with 16KB Flash, 1K x 8 RAM, 23 I/O pins, and a 40 MHz maximum speed in a 28-pin TSSOP package. According to the supplied product data, it supports internal oscillation, 10-bit ADC conversion, and I2C, LINbus, SCI, and SPI connectivity. The device is positioned as a low-end 5 V microcontroller option, with the supplied distributor records also identifying a 3.3 V/5 V operating context. A microcontroller is a programmable integrated circuit containing a CPU core, memory, and peripherals for embedded control. In the broader electronics hierarchy, the MC9S08SH16MTL is a microcontroller, part of integrated circuits, and specifically an 8-bit embedded controller. Its combination of Flash program memory, serial interfaces, analog conversion, and GPIO makes it suitable for compact control systems that need more capability than a basic fixed-function logic device. The supplied specification data identifies the S08 CPU core, 16KB program memory, 1K x 8 RAM, 23 I/O, a 10-bit ADC, and serial connectivity including I2C, LINbus, SCI, and SPI. It also lists low-voltage detection, power-on reset, PWM, and a watchdog timer among the peripherals. These features support sensor reading, actuator control, communication with external modules, and basic motor or power-management functions in embedded products. The 28-TSSOP package is specified as approximately 4.40 mm wide and 0.173 inch wide in the supplied distributor listing. The package is surface mount, while the supplied record identifies tube packaging. Because the product page identifies the part as an End of Life product, current availability, lifecycle status, and replacement strategy should be confirmed with NXP or an authorized distributor before new production design release. Typical engineering uses include industrial control, automotive electronics, sensor interfaces, small motor controllers, and embedded communication modules. The ADC and serial peripherals allow the MCU to read analog conditions and exchange data with sensors or actuators, while PWM and watchdog functions support periodic control and fault monitoring. The 40 MHz speed figure should be treated as a maximum device specification; actual firmware timing depends on the selected clock configuration and operating conditions. Designers should verify the exact pinout, voltage limits, clock configuration, peripheral multiplexing, and programming requirements against the manufacturer datasheet before layout or firmware deployment. The MC9S08SH16MTL is marked for end-of-life handling, so obsolescence risk, last-time-buy status, and approved migration options require direct confirmation rather than assumption.

RFQ Contact
MC9S08SH32CTG - 8-bit S08 MCU 32KB Flash 40MHz | NXP
MC9S08SH32CTG

MC9S08SH32CTG - 8-bit S08 MCU 32KB Flash 40MHz | NXP

The NXP MC9S08SH32CTG is a member of the S08SH family of 8-bit S08 microcontrollers offering 32 KB of on-chip Flash, 40 MHz CPU performance, and a 16-pin TSSOP package with up to 16 GPIO. The part operates from a wide 2.7 V to 5.5 V supply and was originally qualified for AEC-Q100 automotive applications, making it suitable for both industrial and automotive-grade designs. An 8-bit microcontroller (MCU) is a small, self-contained computer built around an 8-bit data path. It integrates a CPU, non-volatile program memory (Flash), working memory (RAM), and a set of analog and digital peripherals onto a single silicon die. MCUs sit at the lowest layer of the embedded control hierarchy - from sensor/transducer through MCU and communications interface up to full system-on-modules. The S08 core is a CISC (Complex Instruction Set Computer) architecture that pairs compact instruction encoding with deterministic interrupt response. Key features of the MC9S08SH32CTG include 32 KB of Flash organized as 32K x 8, an integrated single-wire background debug interface (BDI) for in-circuit programming and debugging, on-chip in-circuit emulation (ICE) with two comparators and nine trigger modes, and an eight-deep FIFO for storing change-of-flow addresses and event-only data. The 40 MHz bus speed supports fast interrupt-driven control loops, while the 5-volt-tolerant I/O allows direct interface to legacy industrial logic levels. The S08SH architecture embeds a small set of production-grade analog and timer peripherals, allowing designers to reduce external component count for cost-sensitive motor control, lighting, sensor processing, and user-interface applications. The Flash is in-application programmable, enabling field firmware updates without removing the device from its target board. Typical applications for the MC9S08SH32CTG include white goods and small appliance controllers, body electronics and lighting modules in vehicles, low-end industrial sensor and actuator nodes, and battery-operated portable systems where the wide supply range and integrated timers simplify power management. The 16-pin TSSOP footprint is small enough for compact PCB layouts while still exposing enough GPIO for typical control tasks. When designing, observe the published supply, clock, and I/O derating limits; place the decoupling capacitor (typically 100 nF plus a bulk 10 uF) within a few millimetres of the VDD/VSS pair; and use the single-wire BDI interface for production flash programming and field debug. This page synthesizes NXP datasheet specifications, distributor pricing, drop-in compatible alternatives, and practical design notes that complement the manufacturer documentation.

RFQ Contact
MC9S08SH32CTJ - 8-bit MCU, 32KB Flash, 40MHz | NXP
MC9S08SH32CTJ

MC9S08SH32CTJ - 8-bit MCU, 32KB Flash, 40MHz | NXP

The NXP MC9S08SH32CTJ is an 8-bit S08 microcontroller (MCU) with 32KB flash memory, 1KB RAM, and a 40MHz HCS08 CPU, housed in a 20-pin TSSOP surface-mount package and qualified to AEC-Q100 for automotive use. An 8-bit microcontroller is a single-chip computer that integrates a processor core, non-volatile flash memory for program storage, SRAM for data, and peripheral modules such as timers, ADCs, and serial communication interfaces on one die. Within the power management hierarchy of embedded systems, an MCU like the S08SH sits at the control layer, executing user firmware to drive sensors, actuators, and communication links in cost-sensitive, general-purpose applications. Key features of the S08SH family include a 40MHz HCS08 CPU executing the HC08 instruction set with an added BGND instruction, up to 32 interrupt/reset sources, and a 12-channel, 10-bit ADC. The family operates in the 5-volt range with 3.3V/5V supply support, making it a low-end option for industrial and automotive control nodes. Technical depth comes from its development support: a single-wire background debug interface (BKGD), in-circuit breakpoint capability, and an on-chip debug module with two comparators, nine trigger modes, and an eight-deep FIFO storing change-of-flow address and event-only data. The S08SH also provides the MTIM (modulo timer) peripheral and a ganged output option allowing one write to change multiple port pins simultaneously. Typical applications include automotive body electronics, industrial control, home appliances, and low-end motor or relay control boards where 5V operation, low cost, and small footprint matter. Design consideration: NXP lists this part as End of Life (EOL); new designs should evaluate the pinout-compatible S08SG family, which offers the same tools and software compatibility with a wider range of package options. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
MC9S08SH32CTL - 8-bit S08 MCU 32KB Flash 40MHz | NXP
MC9S08SH32CTL

MC9S08SH32CTL - 8-bit S08 MCU 32KB Flash 40MHz | NXP

The NXP MC9S08SH32CTL is an 8-bit S08 microcontroller (MCU) with a 32KB (32K x 8) Flash memory, a maximum HCS08 CPU clock of 40 MHz, and a 3.3V/5V supply range, housed in a 28-pin TSSOP surface-mount package and shipped in tube packaging. It is an automotive AEC-Q100 qualified part originally developed by Freescale Semiconductor, now NXP Semiconductors. An 8-bit microcontroller is a single-chip computer whose CPU processes data 8 bits at a time. Within the embedded-systems hierarchy, the MCU sits above discrete logic and below 16/32-bit application processors, integrating the processor core, Flash program memory, RAM, timers, analog peripherals (ADC) and serial communication blocks on one die. The S08 (HCS08) family is NXP's enhanced 8-bit architecture, upward compatible with the HC08 instruction set plus the added BGND instruction, and is designed for cost-sensitive embedded control in the 5-volt range. Key features of the MC9S08SH32 include a 40 MHz HCS08 CPU with up to 32 interrupt/reset sources, 32KB of on-chip Flash program memory, a 12-channel 10-bit ADC, integrated timers, and up to 16 GPIO pins with enhanced serial communications interfaces. These peripherals allow a single chip to handle sensing (10-bit ADC), actuation (timers), and communication in one low-cost package. For development support, the device provides a single-wire background debug interface (BDM) with breakpoint capability for in-circuit debugging, plus an on-chip debug (ICE) module containing two comparators and nine trigger modes, with an eight-deep FIFO for storing change-of-flow address and event-only data. This enables low-cost debugging without an emulator socket. Typical applications include automotive body electronics, industrial control, appliance control, power supplies and other cost-sensitive embedded systems requiring 5V noise immunity and AEC-Q100 grade reliability. A key design consideration: this part is End of Life per NXP's product page, so new designs should evaluate the pin- and software-compatible S08SG family (NXP states S08SH is pin, tool and software compatible with S08SG) or migration targets such as MC9S08SG32/MC9S08EL32 identified in the NXP community for replacements. This page synthesizes distributor pricing context, drop-in alternatives, and EOL cross-reference guidance not found in the manufacturer datasheet alone.

RFQ Contact
MC9S08SH32CTL574 - 8-bit 40MHz S08 MCU, 32KB Flash | NXP
MC9S08SH32CTL574

MC9S08SH32CTL574 - 8-bit 40MHz S08 MCU, 32KB Flash | NXP

The NXP MC9S08SH32CTL574 is an 8-bit S08 microcontroller (MCU) featuring a 40 MHz HCS08 core, 32 KB of on-chip flash memory, and a TSSOP-28 package designed for cost-sensitive embedded control applications. It operates across a 2.7 V to 5.5 V supply range and provides integrated analog peripherals, multiple timers, and a single-wire background debug interface that simplifies in-circuit programming. The S08 (HC08/S08) family is a long-running line of 8-bit reduced instruction set microcontrollers from NXP (formerly Freescale), positioned below 32-bit ARM-based Kinetis parts and above simple 4/8-bit baseline controllers. Within that hierarchy, the SH sub-family targets ultra-low-cost, low-power applications where BOM cost dominates over raw compute performance. Typical applications include household appliances, sensor conditioning, motor control small boards, and human-interface devices. Key features of the MC9S08SH32CTL574 include 32 KB flash program store, 1 KB RAM, an internal clock source, a 10-bit analog-to-digital converter (ADC) with multiple channels, timers including a programmable delay block (PDB) and PWM channels, and the Freescale-standard single-wire background debug mode (BDM). The '574' suffix denotes tape-and-reel packaging in 2,000-piece quantities. Operating temperature range spans -40 C to +85 C for industrial-grade deployments. Architecturally, the device uses an HCS08 CPU core with a 16-bit stack pointer and an enhanced HC08 instruction set. The 32 KB flash is organized for byte-erasable programming, and the device supports in-application reprogramming. The integrated analog chain features sample-and-hold with multiplexed ADC channels suitable for direct sensor interfacing, eliminating external signal conditioning in many designs. Typical use cases include HVAC damper controls, fan speed controllers, smart-meter peripheral slaves, appliance UI boards, battery-pack protection boards, and any embedded application where deterministic 8-bit control with on-chip flash and ADC is sufficient. The TSSOP-28 package is well-suited to compact two-layer boards used in high-volume consumer products. When designing with the MC9S08SH32CTL574, plan for a 4.0 V minimum supply if using the internal low-frequency source for ADC accuracy, and reserve the BDM pin (BKGD) for programming access. Decouple VDD/VSS with a 100 nF ceramic placed within 5 mm of the pin pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the manufacturer datasheet and distributor catalog pages, providing a faster engineering decision baseline.

RFQ Contact
MC9S08SH32MTJ - 8-bit 40MHz 32KB Flash MCU | NXP Semiconductors
MC9S08SH32MTJ

MC9S08SH32MTJ - 8-bit 40MHz 32KB Flash MCU | NXP Semiconductors

The NXP Semiconductors MC9S08SH32MTJ is an 8-bit S08-core microcontroller with 32KB Flash memory, 40MHz bus speed, and 17 general-purpose I/O lines, housed in a 20-pin TSSOP (4.40mm width) package operating from a 3.3V/5V supply. An 8-bit microcontroller (MCU) is a single-chip embedded processor that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, serial interfaces, and analog-to-digital converters on one die. Within the embedded systems hierarchy, the S08 family sits in the low-end 8-bit MCU class, positioned below 16-bit devices like the S12 and 32-bit ARM-based Kinetis parts, and is typically used where cost, simplicity, and 5V robustness matter more than raw processing power. The MC9S08SH32MTJ belongs to the S08SH family, which NXP positions as a low-end option for 5-volt applications. Key features include a 40MHz S08 CISC core, 32KB (32K x 8) Flash program memory, 1KB RAM, and a wide peripheral set: serial communications interface (SCI), serial peripheral interface (SPI), inter-integrated circuit (I2C), and an analog-to-digital converter (ADC). According to NXP, the S08SH family is pin, tool, and software compatible with the S08SG family, offering design flexibility across the two families. For development, the device provides a single-wire background debug interface (BDM), breakpoint capability with in-circuit debugging, and an on-chip debug (ICE) module containing two comparators and nine trigger modes with an eight-deep FIFO for storing change-of-flow address and event-only data. This eliminates the need for costly socketed emulators and lowers the barrier for low-volume firmware development. Typical applications include automotive body electronics (the part is AEC-Q100 qualified), industrial control boards, appliance and white-goods controllers, and 5V sensor or actuator subsystems where the wide 5V operating range simplifies power design compared with 3.3V-only MCUs. A key design consideration: the MC9S08SH32MTJ is End-of-Life per the NXP product page, so new designs should target the pin-compatible S08SG family, and existing designs should plan a last-time-buy or migration strategy. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet, giving engineers a single sourcing and migration reference as of 2026-10-18.

RFQ Contact
MC9S08SH32MTL - 8-bit S08 MCU, 32KB Flash | NXP | Automotive
MC9S08SH32MTL

MC9S08SH32MTL - 8-bit S08 MCU, 32KB Flash | NXP | Automotive

The NXP MC9S08SH32MTL is an 8-bit S08 CISC microcontroller built on the low-power HCS08 core, featuring 32 KB of on-chip Flash, 1 KB of RAM, and a 40 MHz maximum bus clock, all housed in a 28-pin TSSOP package. An 8-bit microcontroller is a single-chip computer that integrates a CPU, memory, and peripherals on one die to execute embedded control tasks. The S08SH family belongs to the HCS08 microcontroller family -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. This particular device is part of NXP's S08 family, originally developed by Freescale Semiconductor for cost-sensitive 5V applications including consumer, industrial, and automotive nodes. Key features include the single-wire background debug interface (BDM), an on-chip in-circuit emulation (ICE) module with two comparators and nine trigger modes, an 8-entry FIFO for change-of-flow tracing, SCI and SPI serial interfaces, and 16 channels of 10-bit analog-to-digital conversion. The device operates from 3.3 V or 5 V supplies and supports an extended -40C to +125C automotive temperature range. Architecturally, the S08SH uses the CISC HCS08 instruction set with a 32 KB Flash block supporting in-application reprogramming plus a separate 32-byte security flash block. The 40 MHz bus is generated from an internal clock source or an external crystal/oscillator, and the integrated 4-channel 16-bit timer/PWM, real-time interrupt, and low-power stop/wait modes allow fine-grained energy management. Typical applications include automotive body controllers (door modules, lighting, mirror controllers), industrial sensor interfaces, white-goods control boards, low-cost HVAC remote panels, and consumer appliance timers. The 23 programmable I/O pins plus 16 analog inputs make it well suited to interface-rich subsystem designs. Designers should note that the 'TL' suffix indicates the TSSOP-28 tube (lead-free) package, while older 'MFA' or 'MTE' variants are not drop-in equivalent. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternatives from the S08SH family plus cross-brand sources, and practical design notes that the manufacturer datasheet alone does not provide.

RFQ Contact
MC9S08SH32MWL - 8-Bit 40MHz S08 MCU 32KB Flash | NXP
MC9S08SH32MWL

MC9S08SH32MWL - 8-Bit 40MHz S08 MCU 32KB Flash | NXP

The NXP MC9S08SH32MWL is an 8-bit S08 microcontroller from the S08SH family, featuring 32KB of on-chip Flash, 1KB of RAM, and a 40 MHz HCS08 CPU core, housed in a 28-pin SOIC package. Designed for low-end 5V applications, this MCU combines an enhanced HCS08 instruction set (including the BGND instruction for background debug) with a peripheral set optimized for cost-sensitive industrial and consumer designs. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data path, integrating a CPU, program memory, data memory, and peripherals into one package. MCUs belong to the broader category of microcontrollers -> embedded processors -> integrated circuits -> semiconductors, and sit below more complex 32-bit microprocessors in cost and power. The S08SH family is positioned as a new low-end option for 5V applications, bridging NXP's older HC08 legacy with the more capable S08 family. Key features include 32KB of Flash program memory, 1KB of RAM, up to 27 general-purpose I/O lines, and a peripheral set comprising an SCI (Serial Communication Interface), SPI, and I2C for wired connectivity. The device integrates a 16-channel, 10-bit ADC, supports up to 32 interrupt/reset sources, and includes a single-wire background debug interface (BDM) plus an on-chip in-circuit emulation (ICE) module for development. The S08 core employs the HC08 instruction set with an added BGND instruction, providing backward compatibility with legacy Freescale/NXP HC08 code while enabling modern HCS08 features such as the on-chip debug module with two comparators and nine trigger modes. An eight-deep FIFO stores change-of-flow addresses and event-only data during debugging, enabling trace without external hardware. Typical applications include industrial control nodes, low-end point-of-sale terminals, simple motor control, sensor interfaces, white goods, and battery-powered consumer devices where 5V tolerance and HC08 code reuse are valued. The 5V-wide operating range and integrated analog simplify designs in noisy industrial environments. Designers should note that the MC9S08SH32MWL has been declared End-of-Life per the NXP product page; long-term designs should evaluate the recommended replacement family. The 28-pin SOIC package is footprint-compatible across the S08SH series, allowing easy migration between the 8KB, 16KB, and 32KB Flash density variants.

RFQ Contact
MC9S08SH4CFK - 40MHz 8-Bit 4KB MCU | NXP | 24-QFN
MC9S08SH4CFK

MC9S08SH4CFK - 40MHz 8-Bit 4KB MCU | NXP | 24-QFN

NXP Semiconductors MC9S08SH4CFK is an 8-bit S08SH-family microcontroller with a 40 MHz maximum CPU frequency, 4 KB of Flash memory, and a compact 24-QFN exposed-pad package. It targets cost-sensitive embedded systems in the 5 V range and is identified by verified listings as an industrial-grade, no-lead device. The verified product information also identifies an 8-bit data bus, HCS08 CPU family, integrated timers, low power consumption, and a 10-bit, 12-channel ADC. What is an 8-bit microcontroller? An 8-bit microcontroller is a semiconductor that integrates a CPU, program memory, data memory, peripherals, and I/O into one device. Its MCU status places it in the embedded-control hierarchy: microcontroller → embedded controller → semiconductor. The S08 architecture provides a compact platform for sequential control, sensor reading, communication, and actuator logic where higher processing capacity is unnecessary. Key verified features include 4 KB of Flash program storage, a 40 MHz HCS08 processor, 8-bit bus width, support for as many as 32 interrupt or reset sources, integrated timers, and a 12-channel ADC with 10-bit resolution. One distributor source states a 2.7 V to 5.5 V supply range, while another describes the family as intended for 5 V applications. Supply limits must therefore be checked against the official datasheet before design release. The 24-QFN-EP package, identified as HVQCCN and measuring 4 mm by 4 mm in verified distributor records, supports compact PCB layouts but requires careful thermal-pad assembly and solder inspection. The exposed pad is electrically and thermally significant and cannot be treated as an unused lead. Programming, reset, clocking, analog grounding, and decoupling require layout review against the manufacturer documentation. Typical applications include low-cost industrial controllers, compact sensor nodes, timer-based modules, simple communications equipment, appliance controls, and automotive or 5 V embedded subsystems when the exact device qualification and electrical limits are confirmed. The 10-bit ADC supports basic analog measurement, while timers support periodic events and time-based control. The primary design tradeoff is limited 4 KB Flash capacity. Firmware should be compact, interrupt handlers efficient, and memory use reviewed before adding protocols or features. Confirm current lifecycle and sourcing status with NXP because the official product page is marked End of Life. This page combines verified lifecycle, package, memory, and distributor information with selection guidance and explicit data gaps.

RFQ Contact
MC9S08SH4CPJ - 40MHz 8-Bit MCU with 4KB Flash | NXP
MC9S08SH4CPJ

MC9S08SH4CPJ - 40MHz 8-Bit MCU with 4KB Flash | NXP

NXP MC9S08SH4CPJ is an 8-bit S08SH-series microcontroller built around a 40 MHz HCS08 processor, with 4 KB of Flash program memory and a 20-pin DIP package. It targets compact 5 V control systems and combines an HC08-compatible instruction set with serial communications interface, serial peripheral interface, I2C, a 12-channel 10-bit analog-to-digital converter, and analog peripherals. The 0.300-inch, 7.62 mm lead pitch supports conventional through-hole assembly and educational or industrial control prototypes. An S08 microcontroller is an embedded processor family designed for compact control tasks such as sensing, actuator control, communications, and simple product automation. The S08SH series occupies the low end of the NXP S08 portfolio and provides a direct migration path toward the pin-, tool-, and software-compatible S08SG family. This makes the MC9S08SH4CPJ useful where a small flash footprint, straightforward peripherals, and a familiar development environment are more important than a high pin count. Key features include 40 MHz operation, 8-bit processing, 4 KB of Flash memory, support for up to 32 interrupt and reset sources, and 10-bit ADC conversion in 2.5 microseconds. The integrated communication interfaces allow the MCU to connect sensors, displays, transceivers, and external converters without requiring separate interface devices. The 3.3 V and 5 V operating choices also accommodate legacy industrial and embedded-control systems. The HCS08 CPU uses the HC08 instruction set with the added BGND instruction. At its 40 MHz operating frequency, the processor provides considerably more timing margin than many simple 8-bit applications require, allowing designers to combine control-loop work with serial communications and periodic analog sampling. The 12-channel ADC, automatic compare function, and internal temperature-sensor capability further reduce the number of external components needed for basic monitoring functions. Typical applications include educational motor-control platforms, simple sensor nodes, compact keypad interfaces, LED-control boards, basic industrial controllers, and low-cost communication equipment. The 20-pin DIP package is particularly useful when a controller must be assembled on a perfboard, prototype PCB, or manually serviced assembly rather than a highly automated surface-mount line. Design around the device's 5 V application focus and confirm the operating-voltage requirements of every attached peripheral. Place the MCU's decoupling capacitors close to the supply pins, route analog inputs away from fast switching nodes, and follow the NXP pin-description table when assigning the 20 DIP leads. The S08SH-to-S08SG compatibility can aid design expansion, but memory size and peripheral availability must be checked for the selected replacement. This page consolidates the manufacturer's device description with package characteristics, interface details, drop-in-family candidates, and practical selection guidance for engineers evaluating the MC9S08SH4CPJ.

RFQ Contact
MC9S08SH4CSC - 40MHz 8-Bit 4KB Flash MCU | NXP | SOIC-8
MC9S08SH4CSC

MC9S08SH4CSC - 40MHz 8-Bit 4KB Flash MCU | NXP | SOIC-8

The NXP Semiconductors MC9S08SH4CSC is an 8-bit HCS08 S08 microcontroller with a 40 MHz maximum frequency, 4 KB of internal flash memory, 512 bytes of RAM, and an SOIC-8 package. It is positioned as a cost-sensitive embedded controller for compact 5 V designs that need deterministic control, integrated USB 2.0 connectivity, and a small PCB footprint. The verified manufacturer result identifies the device as an S08SH 8-bit MCU with 4 KB flash and 40 MHz operation, while distributor listings specify the 8-SOIC package. An S08 microcontroller is an embedded-processing device that combines a processor core, program memory, data memory, and peripherals on one semiconductor package. In the broader hierarchy, it is an 8-bit microcontroller, an embedded controller, and a semiconductor intended for control-oriented products. The MC9S08SH4CSC is suited to applications where simple firmware, peripheral integration, and compact board area are more valuable than a high-performance 32-bit architecture. The main verified features are 40 MHz maximum operating frequency, 4 KB internal flash, 512 B RAM, and integrated USB 2.0. The S08 family also provides an enhanced HCS08 CPU with support for up to 32 interrupt/reset sources. These figures make the device relevant for USB-connected peripherals, compact control modules, and cost-constrained embedded products. A separate third-party comparison also describes an enhanced HCS08 CPU with a 20 MHz bus, but the supplied search data does not establish that value as a formal MC9S08SH4CSC specification. Typical uses include low-cost USB dongles, simple human-interface-device controllers, compact motor or relay-control boards, instrumentation interfaces, and other 5 V embedded systems. The SOIC-8 package supports conventional surface-mount assembly and is easier to handle than a very fine-pitch package in low- or medium-volume production. Designers should verify the exact pin functions, USB electrical requirements, clock configuration, and programming workflow in the NXP datasheet before layout release. Because the supplied results contain inconsistent package references from third-party aggregators, the target should be treated as an SOIC-8 device based on the distributor and manufacturer listings, while uncertain electrical details remain marked for verification. This page consolidates the verified manufacturer and distributor information, separates confirmed specifications from unavailable parameters, and highlights sourcing and replacement limitations for an end-of-life low-cost MCU.

RFQ Contact
MC9S08SH4CTG - 8-bit S08 MCU 4KB Flash 40MHz 16-TSSOP | NXP
MC9S08SH4CTG

MC9S08SH4CTG - 8-bit S08 MCU 4KB Flash 40MHz 16-TSSOP | NXP

The NXP MC9S08SH4CTG is a low-cost, high-performance 8-bit S08 microcontroller featuring a 40 MHz CPU, 4 KB flash, and a 16-pin TSSOP package. It belongs to the S08SH family, a new low-end option for 5-volt applications. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates an 8-bit CPU core, non-volatile program memory, working RAM, and peripherals such as timers, communication interfaces, and analog converters. Within the semiconductor hierarchy, MCUs sit under microcontrollers, then embedded processors, then logic/semiconductor ICs. The S08 family specifically uses an enhanced HCS08 instruction set with the BGND (background debug) instruction added for in-circuit debug. Key features include 4 KB flash, 256 B RAM, a 12-channel 10-bit ADC with 2.5 µs conversion time, an analog comparator, an internal temperature sensor, plus SCI, SPI, and I²C communication interfaces. The device supports up to 32 interrupt/reset sources and offers 13 GPIO pins. Operating voltage spans 2.7 V to 5.5 V, suiting 3.3 V and 5 V designs. Architecturally, the MC9S08SH4CTG uses a CISC HCS08 core with a 20 MHz internal bus, achieving 40 MHz CPU throughput, plus on-chip debug and a single-wire background debug mode. It is pin, tool, and software compatible with the S08SG family, easing code migration. Typical applications include low-end consumer appliances, white goods control boards, simple sensor nodes, industrial 5 V control logic, automotive body controllers (where an AEC-Q100 equivalent such as MC9S08SH4CFK is preferred), and battery-powered handheld devices. When designing with this MCU, budget for the internal bus at 20 MHz and verify the 16-pin TSSOP thermal envelope at sustained 40 MHz operation. For new designs consider migrating to the active S08SH4/8 variants in 20-pin TSSOP for additional GPIO. This page synthesizes distributor pricing, drop-in alternatives from the S08SH family, and practical design notes that complement the manufacturer datasheet for engineers evaluating the MC9S08SH4CTG.

RFQ Contact
MC9S08SH4CTJ - 8-bit 40MHz HCS08 MCU 4KB Flash 20-TSSOP
MC9S08SH4CTJ

MC9S08SH4CTJ - 8-bit 40MHz HCS08 MCU 4KB Flash 20-TSSOP

The NXP MC9S08SH4CTJ is a low-cost, high-performance 8-bit microcontroller from the HCS08 family featuring a 40 MHz CPU core, 4 KB of on-chip Flash memory, and 256 B of RAM in a 20-pin TSSOP package. Operating from a 2.7 V to 5.5 V supply, it integrates a 12-channel 10-bit ADC with internal temperature sensor, multiple timers (MTIM, RTI, TPM), an SCI/UART, an SPI, an I2C, and an analog comparator. The S08 core supports the HC08 instruction set with the added BGND instruction and up to 32 interrupt sources, making it suitable for cost-sensitive industrial and consumer applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash program memory, and peripherals onto one die. The HCS08 is NXP's (formerly Freescale's) enhanced 8-bit architecture, succeeding the classic HC08 by lowering active current per MHz and adding the BGND background-debug instruction. Within the broader semiconductor taxonomy, the MC9S08SH4CTJ sits at the bottom rung of the HCS08 SH family, occupying the same generation as the SH8 and SH16 siblings but with a smaller Flash footprint for budget-constrained designs. Key differentiating specifications include a 40 MHz bus frequency, 2.7 V-5.5 V wide supply range, an internal clock source with optional PLL-style prescaler behavior for power tuning, low-power STOP and WAIT modes with fast wake-up, and on-chip debug via a single-wire BDM interface. The 12-channel 10-bit ADC with automatic compare function and an internal temperature sensor enables mixed-signal sensing without external components, while the rich timer/PWM block supports motor and lighting control tasks. Typical applications include low-cost motor control (small BLDC and stepper drivers), HVAC sensor interfaces, white-goods and home-appliance user-interface boards, battery chargers, smart sensors, and small IoT edge nodes. The wide operating voltage and integrated analog reduce BOM cost; the 20-pin TSSOP footprint is friendly to compact PCBs that previously required 8-pin MCUs. When designing with this device, reserve sufficient PCB copper around the exposed pad for thermal dissipation and connect it to GND. Programming and debug are handled through NXP's BDM interface, so plan a 2x3 or 1x6 footprint even if you do not populate it during production. This page synthesizes distributor pricing, drop-in alternatives from the same SH family, and practical design notes not found in the standalone manufacturer datasheet.

RFQ Contact
MC9S08SH4CWJ - 8-Bit 40MHz MCU, 4KB Flash | NXP
MC9S08SH4CWJ

MC9S08SH4CWJ - 8-Bit 40MHz MCU, 4KB Flash | NXP

The NXP Semiconductors MC9S08SH4CWJ is an 8-bit S08 microcontroller operating at up to 40 MHz, with 4 KB flash memory, 256 bytes of RAM, a 10-bit ADC, and 17 I/O pins in a 20-pin SOIC package. Its operating supply range is 2.7 V to 5.5 V, and the specified temperature range is -40°C to +85°C. An S08 microcontroller is an 8-bit embedded-control device designed to combine a processor core, program memory, data memory, and mixed-signal peripherals on one integrated circuit. It belongs to the hierarchy of microcontroller, embedded processor, semiconductor, and electronic-control component. Compared with a general-purpose processor, an S08 MCU is optimized for compact control systems that read sensors, operate actuators, and manage communications through dedicated hardware peripherals. The MC9S08SH4CWJ provides SCI, SPI, I²C, a 10-bit analog-to-digital converter, an analog comparator, and a temperature sensor. These peripherals reduce the need for external interface circuits in compact industrial or consumer-control products. A 40 MHz core provides timing margin for protocol handling and control-loop execution, while 17 I/O pins allow external sensors, switches, indicators, and actuators to be connected without expanding the device footprint. The device uses the 8-bit S08 architecture and includes 256 bytes of data RAM. Its 20-pin SOIC package is designed for surface-mount assembly and remains appropriate for conventional leaded-package production lines. Because this part is listed as end of life by NXP, engineers should verify supply continuity, firmware support, and successor options before starting a new high-volume design. Typical applications include compact industrial controllers, environmental monitoring, digital thermometers, analog sensor interfaces, communication modules, and low-cost embedded control boards. The ADC and comparator support direct measurement of resistive or voltage-based sensors, while SCI, SPI, and I²C enable connection to displays, data loggers, sensors, and external transceivers. The principal design consideration is lifecycle risk rather than electrical compatibility. Confirm the required S08 toolchain, programming method, memory map, peripheral configuration, and long-term availability before committing a production BOM. PCB designs should follow the manufacturer pin-description table and preserve the 20-pin SOIC footprint. This page combines the confirmed device specifications, lifecycle status, package information, application guidance, and same-family drop-in alternatives. It also distinguishes electrically similar parts from those that differ materially in flash capacity, temperature grade, or device function, helping engineers assess redesign risk before procurement.

RFQ Contact
MC9S08SH4CWJR - 8-Bit 40MHz MCU with 4KB Flash | NXP
MC9S08SH4CWJR

MC9S08SH4CWJR - 8-Bit 40MHz MCU with 4KB Flash | NXP

The NXP Semiconductors MC9S08SH4CWJR is an 8-bit HCS08 microcontroller with a 40 MHz CPU, 4 KB of flash memory, and integrated analog peripherals for precision-control designs. The device is associated with a 20-pin SOIC package, operates from a 5 V supply, and supports high-speed control applications. Its S08 architecture combines an 8-bit CPU, on-chip program memory, and hardware peripherals in a compact surface-mount package. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals such as timers, comparators, and communication interfaces on one integrated circuit. The MC9S08SH4CWJR belongs to the HCS08 family, which sits within the broader hierarchy of embedded controllers, 8-bit microcontrollers, and integrated circuits. The S08 family emphasizes cost-conscious embedded control, fast execution, and compatibility among related devices, allowing a common hardware and software approach across compact control products. The principal specifications include an 8-bit CPU operating at up to 40 MHz, 4 KB of flash program memory, and a nominal 5 V operating environment. Integrated analog peripherals support precision-control applications, while the high-speed core enables rapid control-loop execution. The 20-pin SOIC option provides a familiar surface-mount footprint and is suitable for designs that do not require the smallest possible package. The enhanced HCS08 CPU uses the HC08 instruction set with the added BGND instruction and can support as many as 32 interrupt and reset sources. Its bus-oriented design permits efficient peripheral integration and predictable control of timing-sensitive operations. The 4 KB flash allocation is appropriate for compact firmware containing initialization, state logic, and dedicated control routines without requiring a large external memory interface. Typical applications include small motor and actuator controllers, appliance control modules, temperature-control products, sensor conditioning systems, and industrial automation peripherals. The MCU is particularly relevant when a design needs a fast 8-bit control engine, analog comparison functions, and a 5 V supply in a compact embedded package. For PCB design, preserve the pin assignments and decoupling requirements defined by the manufacturer datasheet for the exact ordering code. Confirm the package interpretation against the selected MCU before layout because published listings associate the CWJ family with a 20-pin SOIC, while another distributor record also contains QFN-24 package information for the same searchable MPN. This product page combines the verified technical highlights, commercial sourcing workflow, same-family alternatives, comparison parameters, and practical selection guidance. The drop-in candidates are restricted to documented same-package options, and each alternative clearly identifies differences in flash capacity or related family parameters.

RFQ Contact
MC9S08SH4MFK - 8-bit HCS08 MCU 4KB Flash 40MHz QFN-24 | NXP
MC9S08SH4MFK

MC9S08SH4MFK - 8-bit HCS08 MCU 4KB Flash 40MHz QFN-24 | NXP

The NXP MC9S08SH4MFK is an 8-bit HCS08-family microcontroller with 4 KB Flash program memory, 256 B RAM, and a 40 MHz CPU core, housed in a 24-pin QFN-EP (4x4 mm) package with an exposed thermal pad. It integrates a 12-channel 10-bit ADC, up to 17 general-purpose I/O lines, and an internal oscillator. The HCS08 core adds the BGND instruction to the legacy HC08 instruction set for simplified background-debug operation. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral set targeted at cost-sensitive embedded control. Within the broader taxonomy, the MC9S08SH4 belongs to microcontrollers -> microcontrollers and microprocessors -> integrated circuits -> semiconductors. As an HCS08 device it is a member of the S08 sub-family of low-cost, high-performance 8-bit MCUs designed for general-purpose and low-power embedded applications. Key features include 4 KB (4K x 8) Flash program memory, 256 B RAM, 17 GPIO pins, an internal oscillator, 32 interrupt/reset sources, an integrated 12-channel 10-bit SAR ADC with 2.5 us conversion time, and a robust HCS08 CPU core delivering up to 40 MHz operation. The QFN-EP package with exposed pad enables direct PCB heatsinking, important for the wide 2.7 V to 5.5 V supply range applications that span industrial and consumer segments. The HCS08 architecture is a low-power, fully-static CMOS design with on-chip single-wire background-debug support, allowing non-intrusive in-circuit programming and debugging without consuming any I/O pin. Internal clock sources, watchdog, and low-voltage detect reduce external component count, supporting compact BOMs in space-constrained designs. Typical applications include low-cost consumer appliances, white-goods user interfaces, industrial sensor front-ends, battery-powered handheld instruments, and small motor-control/HMI boards. The 17 GPIO and 12-channel ADC map well to multi-channel sensor reading and PWM-driven actuator interfaces. When designing with this device, keep ADC reference decoupling within 10 mm of the VREF pin and route the exposed pad to a continuous ground pour for thermal and electrical performance. Verify programming mode entry sequence and reset timing in software before enabling peripherals. This page synthesizes distributor pricing, datasheet specs, and drop-in alternatives not aggregated on a single manufacturer or distributor page, providing a one-stop engineering reference.

RFQ Contact
MC9S08SH4MPJ - 8-bit S08 MCU, 4KB Flash, 40MHz | NXP DIP-20
MC9S08SH4MPJ

MC9S08SH4MPJ - 8-bit S08 MCU, 4KB Flash, 40MHz | NXP DIP-20

The NXP MC9S08SH4MPJ is an 8-bit microcontroller from the S08SH family, featuring an enhanced HCS08 CPU core, 4KB of on-chip Flash, 256B of RAM, and a 40 MHz maximum bus frequency, all integrated into a 20-pin PDIP through-hole package. The part targets low-cost, low-end 5V applications and offers a broad peripheral mix: a 12-channel 10-bit ADC with 2.5 µs conversion time and an internal temperature sensor, plus SCI, SPI, and I²C communication interfaces. Operating voltage spans 2.7V to 5.5V with automotive temperature grade support. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals such as timers, ADC, and communication blocks. The HCS08 core is NXP's enhanced 8-bit CPU; the S08SH belongs to the S08 family of microcontrollers, which itself sits inside the broader category of microcontrollers (MCUs) and embedded processors. LDOs, op-amps, and power management ICs typically surround an MCU on a PCB, while the MCU orchestrates sensors, actuators, and user I/O. The 8-bit segment remains the lowest-cost option for deterministic, simple control tasks such as appliance control, lighting, and human-machine interfaces. Key features include 4KB Flash, 256B RAM, up to 32 interrupt sources, an internal clock source, and a background debug mode (BGND) for non-intrusive in-circuit debugging. The device supports 5V-tolerant I/O and includes an internal voltage regulator with a power-on reset (POR) block. The S08SH family is pin, tool, and software compatible with the S08SG series, enabling code reuse between the two. The ADC's 2.5 µs conversion time and integrated temperature sensor make it suitable for sensor-conditioning applications, while the SCI/SPI/I²C interfaces support communication with master controllers or sensors. Typical applications include appliance control, building automation, simple user interfaces, low-end motor control (small fans, solenoids), and sensor signal conditioning. The DIP-20 package supports hobby, prototyping, and through-hole manufacturing where SMD is undesirable. When designing with the MC9S08SH4MPJ, ensure that decoupling capacitors are placed close to VDD/VSS, the RESET pin is properly pulled up, and the BGND pin is not left floating in production. The part is a drop-in for other S08SH-family members with the same Flash/RAM configuration. This page combines distributor pricing, datasheet excerpts, drop-in same-family alternatives, and design notes that are not aggregated on DigiKey, Mouser, or Octopart product pages.

RFQ Contact