Products (22,000+)

MKE04Z64VQH4 - 48MHz 64KB Cortex-M0+ MCU | NXP
MKE04Z64VQH4

MKE04Z64VQH4 - 48MHz 64KB Cortex-M0+ MCU | NXP

The NXP Semiconductors MKE04Z64VQH4 is a 32-bit Kinetis KE04 microcontroller with a 48 MHz Arm Cortex-M0+ core, 64 KB of Flash memory, 8 KB of SRAM, and a 64-QFP package measuring 14 mm by 14 mm. It operates from 2.7 V to 5.5 V and supports an ambient operating-temperature range from -40 °C to 105 °C. The device combines a compact general-purpose MCU package with enhanced ESD and EMC performance for cost-sensitive, high-reliability equipment. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and interface circuitry on one device. The Kinetis KE04 belongs to the hierarchy of embedded MCU, 32-bit RISC microcontroller, Cortex-M0+ processor, and semiconductor platform. Its Arm Cortex-M0+ architecture emphasizes low power consumption, deterministic execution, and a compact instruction set for embedded control systems operating from 2.7 V to 5.5 V. The main features include a 48 MHz Cortex-M0+ processor, 64 KB Flash for firmware, and 8 KB SRAM for working data. The 64-QFP package provides 64 external leads for power, ground, clock, reset, programming, communications, and general-purpose I/O. NXP describes the family as a robust MCU intended for cost-sensitive applications exposed to electrically noisy industrial environments. Its operating voltage and temperature ratings also make it suitable for embedded control, appliance, and industrial interface products. The KE04 architecture is designed for low-cost embedded designs that need more capability than an 8-bit controller without requiring a high-performance Cortex-M processor. At 48 MHz, the core provides substantially greater application-code capacity than entry-level 8-bit devices, while the Cortex-M0+ architecture maintains a simple programming model and efficient event-driven operation. Integrated analog peripherals support cost-sensitive products that need measurement and control functions without relying heavily on external components. Typical applications include industrial control modules, motor and relay interfaces, appliance controllers, building equipment, energy meters, sensor nodes, and compact communications equipment. The 2.7 V to 5.5 V supply range permits operation from regulated 3.3 V and 5 V rails. The enhanced ESD and EMC performance is especially relevant to boards connected to motors, relays, long cables, or industrial sensors. The 64-pin package also offers more I/O and peripheral routing options than smaller 32-pin and 48-pin variants. Designers should account for the high-current transitions and electrical noise associated with 5 V systems when arranging decoupling and grounding. Place the supply bypass capacitors close to the corresponding power pins, keep sensitive analog routing away from switching nodes, and provide a clean return path beneath the device. Before PCB release, verify pin multiplexing, programming signals, clock configuration, and the complete 64-pin assignment using the pin-description table in the manufacturer datasheet. This product page combines the key MKE04Z64VQH4 characteristics with practical application guidance, same-family drop-in alternatives, package information, and engineering-oriented selection criteria. These details help engineers determine whether the 48 MHz Cortex-M0+ MCU, 64 KB Flash configuration, 8 KB SRAM, and 64-QFP footprint match the electrical, environmental, and mechanical requirements of a new embedded design.

RFQ Contact
MKE04Z64VQH4557 - 64KB Flash Kinetis KE04 ARM Cortex-M0+ MCU | NXP
MKE04Z64VQH4557

MKE04Z64VQH4557 - 64KB Flash Kinetis KE04 ARM Cortex-M0+ MCU | NXP

The NXP MKE04Z64VQH4557 is a Kinetis KE04 sub-family 32-bit ARM Cortex-M0+ microcontroller (MCU) integrating 64 KB of flash memory and 4 KB of SRAM in a 64-pin LQFP/QFP package (14x14 mm). It is a member of the 8-bit Kinetis E series designed to replace legacy HC08/HC11 microcontrollers with a low-power 32-bit core. The MKE04Z64VQH4557 runs at up to 48 MHz CPU clock with an operating voltage range of 2.7 V to 5.5 V, supporting direct interfacing with 5 V analog and digital peripherals. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash + RAM), peripherals (timers, ADC, communication interfaces), and interrupt control on a single die. The MKE04Z64VQH4557 belongs to the Kinetis E family, which sits within NXP's broader ARM Cortex-M microcontroller portfolio. Its hierarchical classification is: ARM Cortex-M0+ core -> Kinetis E series -> Kinetis KE04 sub-family -> low-power 5 V MCU. This 5 V-tolerant MCU class bridges legacy 8-bit designs and modern 32-bit Cortex-M architectures, providing a software-compatible upgrade path. Key features include an 8-channel, 12-bit SAR ADC with up to 1 Msps sampling, up to 58 available GPIO pins with interrupt capability, two analog comparators (ACMP), a 6-channel PWM/timer module (FTM), one I2C, two UART, and one SPI peripheral. The device includes a low-power Run, Wait, and Stop power modes, plus a 1 kHz low-power timer that operates in Stop mode for wakeup duty cycling. The Kinetis KE04 architecture uses a Cortex-M0+ core with a single-cycle multiplier and a single 32-bit bus matrix that connects core, flash, RAM and AIPS-Lite peripheral bridge. The flash controller supports 8-bit, 16-bit and 32-bit reads to accelerate thumb code execution. The chip implements a 6-channel FlexTimer (FTM) supporting PWM, input capture, and output compare, plus a 16-bit low-power timer (LPTMR) for low-power wakeup duty cycles. Typical applications include industrial control (sensor signal chains, motor drive PWM, building automation), automotive body electronics (LIN slaves, lighting controllers, climate modules), home appliances (washing machines, refrigerators, induction cookers), and low-cost consumer products needing 5 V tolerance with 32-bit performance. The wide 2.7-5.5 V supply lets designers connect directly to 3.3 V or 5 V sensors without level shifters. When designing with this MCU, keep analog and digital ground returns separated to maintain ADC accuracy, place a 100 nF decoupling cap on every VDD pin, and use the CWDT or window watchdog timer to recover from code-locking events in noisy industrial environments. This page synthesizes distributor pricing, drop-in Kinetis family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
MKE04Z8VFK4 - 48MHz Cortex-M0+ 8KB Flash MCU, 24-QFN | NXP
MKE04Z8VFK4

MKE04Z8VFK4 - 48MHz Cortex-M0+ 8KB Flash MCU, 24-QFN | NXP

The NXP Semiconductors MKE04Z8VFK4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE04 family, operating at up to 48 MHz with 8 KB of embedded flash memory and 1 KB of SRAM in a 24-QFN (4x4 mm) surface-mount package. A microcontroller is the programmable control core of an embedded system, sitting between raw sensors and power stages on one side and actuators, communications links and human interfaces on the other. The Kinetis KE04 family extends the NXP Kinetis E series concept into a cost-sensitive, 5 V-capable tier with enhanced ESD and EMC behaviour, positioning it as a rugged general-purpose MCU (microcontroller unit) for electrically noisy environments. Key characteristics of the MKE04Z8VFK4 include a 48 MHz Cortex-M0+ core with 8 KB of flash (8K x 8) for firmware, 1 KB of SRAM for working data, 6-bit and 12-bit analog conversion capability, and operation from a single 3.3 V or 5 V supply rail. The 24-QFN (4x4 mm) footprint keeps the board area small while exposing a thermal pad for improved heat spreading. Architecturally the device belongs to the Kinetis E series, a low-cost branch of the Kinetis portfolio built on the ARM Cortex-M0+ instruction set. The M0+ core adds a small set of DSP-like instructions and an improved NMI path over the original Cortex-M0, while the modest flash budget of 8 KB makes the part a natural fit for tightly scoped control tasks rather than protocol stacks or graphical user interfaces. Typical applications include industrial control and monitoring nodes, small appliance control boards, LED lighting control, automotive accessory controllers, and smart sensor hubs that must survive electrically aggressive surroundings. The 4x4 mm package and low-power modes also suit battery-backed utility and metering peripherals. When designing around this device, plan the printed circuit board for the exposed pad thermal connection, keep decoupling close to the supply pins, and confirm the exact ADC and I/O pin assignment from the manufacturer pin description table before committing the layout. Firmware budgets should respect the 8 KB flash ceiling, which usually means using the on-chip peripherals rather than large protocol middleware. This page consolidates manufacturer part data, drop-in alternatives in the same footprint, a parameter-by-parameter comparison, and practical PCB and firmware design notes that a distributor catalogue listing alone does not provide.

RFQ Contact
MKE04Z8VTG4 - 8KB Cortex-M0+ Automotive MCU | NXP
MKE04Z8VTG4

MKE04Z8VTG4 - 8KB Cortex-M0+ Automotive MCU | NXP

The NXP Semiconductors MKE04Z8VTG4 is an ultra-low-power automotive microcontroller based on the Arm Cortex-M0+ architecture, with 8 KB of flash memory, 1 KB of RAM, integrated timers, and a 16-pin TSSOP package. The manufacturer product page identifies a 40 MHz core speed and positions the device for compact vehicle applications requiring economical embedded control. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripherals such as timers and communication interfaces onto one die. The MKE04Z8VTG4 belongs to the Kinetis KE04 sub-family and sits within the broader hierarchy of embedded MCU, 32-bit processor, and automotive semiconductor products. Its compact footprint and resource allocation suit body, convenience, lighting, and auxiliary control modules where a higher-performance MCU would add unnecessary cost or power. The principal features include 8 KB of flash for firmware, 1 KB of SRAM for working data, an Arm Cortex-M0+ core, and integrated timing peripherals. These resources support periodic sensing, debouncing, control sequencing, and state-machine operation without requiring an external memory interface. The 16-pin TSSOP package also simplifies assembly for designs requiring a compact, leaded surface-mount footprint. The 32-bit Cortex-M0+ architecture provides efficient handling of control logic while keeping the implementation suitable for cost-sensitive automotive electronics. The MKE04Z8VTG4 designation identifies a specific ordering configuration within the KE04 family, and the product listing describes an automotive MCU with integrated timers. Detailed clock-tree settings, peripheral variants, and electrical limits should be confirmed against the manufacturer datasheet before a new design is released. Typical uses include automotive switch and relay-control modules, motor-control helpers, illumination controllers, sensor-conditioning nodes, and small body-electronics systems. A timer-based implementation can generate fixed-period control signals, count external events, and coordinate actuator updates while the internal flash stores application firmware and the SRAM retains runtime variables. Designers should review the pin-description table, recommended operating voltage, clock configuration, and decoupling requirements in the manufacturer datasheet before schematic capture. Because this MCU is intended for vehicle applications, production designs should also confirm environmental qualification, traceability requirements, and the exact suffix coding against their supplier documentation. This page organizes the manufacturer specifications, source links, application guidance, design considerations, and verified comparison parameters for MKE04Z8VTG4. It also distinguishes confirmed drop-in replacements from broader functional alternatives so engineers can assess PCB compatibility before committing to a sourcing change.

RFQ Contact
MKE04Z8VTG4R - 8KB Cortex-M0+ Automotive MCU | NXP (Tape & Reel)
MKE04Z8VTG4R

MKE04Z8VTG4R - 8KB Cortex-M0+ Automotive MCU | NXP (Tape & Reel)

The NXP Semiconductors MKE04Z8VTG4R is an ultra-low-power automotive microcontroller based on the Arm Cortex-M0+ architecture, with 8 KB of flash memory, 1 KB of RAM, integrated timers, and a 16-pin TSSOP package. The manufacturer product page identifies a 40 MHz core speed and positions the device for compact vehicle applications requiring economical embedded control. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripherals such as timers and communication interfaces onto one die. The MKE04Z8VTG4R belongs to the Kinetis KE04 sub-family and sits within the broader hierarchy of embedded MCU, 32-bit processor, and automotive semiconductor products. Its compact footprint and resource allocation suit body, convenience, lighting, and auxiliary control modules where a higher-performance MCU would add unnecessary cost or power. The principal features include 8 KB of flash for firmware, 1 KB of SRAM for working data, an Arm Cortex-M0+ core, and integrated timing peripherals. These resources support periodic sensing, debouncing, control sequencing, and state-machine operation without requiring an external memory interface. The 16-pin TSSOP package also simplifies assembly for designs requiring a compact, leaded surface-mount footprint. The 32-bit Cortex-M0+ architecture provides efficient handling of control logic while keeping the implementation suitable for cost-sensitive automotive electronics. The MKE04Z8VTG4R designation identifies a specific ordering configuration within the KE04 family, and the product listing describes an automotive MCU with integrated timers. Detailed clock-tree settings, peripheral variants, and electrical limits should be confirmed against the manufacturer datasheet before a new design is released. Typical uses include automotive switch and relay-control modules, motor-control helpers, illumination controllers, sensor-conditioning nodes, and small body-electronics systems. A timer-based implementation can generate fixed-period control signals, count external events, and coordinate actuator updates while the internal flash stores application firmware and the SRAM retains runtime variables. Designers should review the pin-description table, recommended operating voltage, clock configuration, and decoupling requirements in the manufacturer datasheet before schematic capture. Because this MCU is intended for vehicle applications, production designs should also confirm environmental qualification, traceability requirements, and the exact suffix coding against their supplier documentation. This page organizes the manufacturer specifications, source links, application guidance, design considerations, and verified comparison parameters for MKE04Z8VTG4R. It also distinguishes confirmed drop-in replacements from broader functional alternatives so engineers can assess PCB compatibility before committing to a sourcing change.

RFQ Contact
MKE04Z8VWJ4 - Cortex-M0+ 48MHz MCU, 8KB Flash, 20-SOIC | NXP
MKE04Z8VWJ4

MKE04Z8VWJ4 - Cortex-M0+ 48MHz MCU, 8KB Flash, 20-SOIC | NXP

The NXP MKE04Z8VWJ4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE04 sub-family, running up to 48 MHz with 8 KB of Flash and 1 KB of SRAM in a 20-pin wide-body SOIC (WB SOIC) package. The part targets cost-sensitive, high-reliability industrial and appliance applications operating in electrically noisy environments, providing enhanced ESD/EMC performance that simplifies compliance with industrial EMI/ESD standards. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals (timers, ADC, communication interfaces, GPIO) on a single die. The Cortex-M0+ architecture, as implemented in the KE04, sits in the ARM Cortex-M hierarchy above Cortex-M0 and below Cortex-M3/M4 in performance and feature set, offering Thumb-2 instruction set compatibility, deterministic interrupt latency, and ultra-low power sleep modes. The Kinetis KE04 sub-family further positions the MKE04Z8VWJ4 within the broader NXP Kinetis E series for 5V-tolerant, robust MCU designs. Key features of the MKE04Z8VWJ4 include an integrated analog block with a 12-bit ADC and analog comparator, multiple timer modules (FTM, TPM, LPTMR), communication peripherals including UART, SPI, and I2C, an internal LDO regulator for stable core supply, and a wide operating voltage range supporting both 3.3V and 5V rails. The device's 5V-tolerant GPIO and enhanced ESD/EMC immunity reduce external protection component cost. The Kinetis KE04 architecture uses a 2-stage pipeline Cortex-M0+ core with single-cycle I/O access, enabling deterministic 48 MHz operation at low power. The on-chip Flash controller supports byte-addressable programming and EEPROM-like data storage emulation in the main Flash array. Hardware CRC and a watchdog timer (WDOG) provide functional safety hooks for industrial control loops. Typical applications include household appliances (white goods, motor control front-ends), industrial sensor conditioning, smart metering edge nodes, automotive body electronics (non-safety), and low-cost human-machine interface (HMI) controllers. The wide SOIC package also supports hand-soldering and rework in prototype runs. When designing with this device, ensure that the supply decoupling network uses a 100 nF ceramic capacitor close to each VDD pin and a bulk 4.7 uF capacitor on the main rail. Verify that your code execution timing budget fits within 48 MHz cycles, and confirm that your chosen in-circuit debugger is CMSIS-DAP compatible. This page synthesizes distributor pricing, drop-in Kinetis family alternatives, application guidance, and parametric comparisons beyond the manufacturer datasheet excerpt, helping engineers select and source the MKE04Z8VWJ4 with confidence.

RFQ Contact
MKE06Z64VLD4 - 48MHz 64KB Flash Cortex-M0+ MCU | NXP
MKE06Z64VLD4

MKE06Z64VLD4 - 48MHz 64KB Flash Cortex-M0+ MCU | NXP

The NXP Semiconductors MKE06Z64VLD4 is a 32-bit ARM Cortex-M0+ Kinetis KE06 microcontroller operating up to 48 MHz, with 64 KB of Flash memory, 8 KB of SRAM, and a 44-LQFP 10 x 10 mm package. It operates from 2.7 V to 5.5 V and is designed for cost-sensitive embedded systems requiring a compact 5 V microcontroller with enhanced electrical-noise resilience. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The MKE06Z64VLD4 belongs to the Kinetis E series, where the Cortex-M0+ core provides a compact, energy-efficient architecture for control-oriented tasks. This device hierarchy connects the ARM Cortex-M0+ processor, 32-bit microcontroller, embedded controller, and semiconductor categories within a single integrated component. Key features include a 48 MHz Cortex-M0+ core, 64 KB of Flash program memory, 8 KB of SRAM, and integrated 6-bit and 12-bit ADC channels. Its 5 V robust design emphasizes enhanced ESD and EMC performance for high-reliability products used in electrically noisy environments. An integrated low-voltage detector and power-on reset module supports reliable startup and supply monitoring. The 44-LQFP package provides a conventional leaded surface-mount footprint that is inspectable after assembly and appropriate for prototypes, industrial controllers, and cost-sensitive production boards. The device combines a 2.7 V to 5.5 V operating range with 64 KB of embedded Flash, avoiding an external memory interface for many control applications while retaining sufficient SRAM for protocol handling, acquisition, and supervisory logic. Typical applications include industrial control panels, appliance controllers, building equipment, automotive accessories, sensor nodes, and compact embedded systems. The ADC resources support analog measurement, while the Cortex-M0+ instruction set and integrated memories are suited to real-time monitoring, state-machine control, communications, and actuator supervision where deterministic peripheral behavior and low system complexity matter. PCB design should preserve clean supply distribution because high-current return paths can disturb sensitive ADC measurements. Place the decoupling capacitor close to the supply pins, route analog inputs away from switching nodes, and connect all ground pins according to the manufacturer pin and layout guidance. Firmware should also exercise reset and low-voltage conditions because the integrated LVD/POR circuitry does not replace application-level validation of brownout behavior. This product page combines NXP device information with package, memory, application, sourcing, and replacement guidance for engineers evaluating the MKE06Z64VLD4. It also highlights the limits of direct substitution: a same-package candidate must match the critical clock, memory, voltage, peripheral, and pin-level requirements rather than relying on package similarity alone.

RFQ Contact
MKE06Z64VLK4 - 48MHz Cortex-M0+, 64KB Flash | NXP
MKE06Z64VLK4

MKE06Z64VLK4 - 48MHz Cortex-M0+, 64KB Flash | NXP

The NXP Semiconductors MKE06Z64VLK4 is a 48MHz ARM Cortex-M0+ Kinetis KE06 microcontroller with 64KB Flash and 8KB SRAM in an 80-LQFP (14x14) package. It combines a 32-bit RISC core with a 5V-capable, robust mixed-signal design intended for cost-sensitive industrial control and high-electrical-noise environments. A microcontroller such as the MKE06Z64VLK4 integrates a CPU, program memory, data memory, clock control, communications peripherals, timers, analog interfaces, and GPIO into one device. The Kinetis KE06 family extends the Kinetis E-series architecture with enhanced ESD and EMC performance. This makes it useful for embedded automation, metering, motor-control, and IoT equipment where an inexpensive 8-bit controller may not provide sufficient performance. The MKE06Z64VLK4 operates at up to 48MHz and includes 64KB of Flash alongside 8KB of SRAM. Its Kinetis E-series peripheral set provides analog, communication, timing, and control functions for cost-sensitive embedded systems. The manufacturer describes the KE06 family as pin-compatible across the Kinetis E series, which can simplify product revisions when a related member provides equivalent pin configuration and suitable memory and peripheral resources. The 5V and robust MCU positioning is significant because it supports designs operating from higher-voltage industrial rails while retaining an economical ARM Cortex-M0+ architecture. Its 80-LQFP package exposes substantially more I/O than a small microcontroller package, allowing more external sensors, switches, communications lines, and actuator interfaces to be connected. Pin assignment and multiplexing should always be checked in the manufacturer pin-description table before finalizing a PCB. Typical uses include industrial control panels, smart meters, building equipment, sensor nodes, motor-control interfaces, and connected products requiring a 32-bit control architecture. The 48MHz Cortex-M0+ core provides more computational headroom than 8-bit designs, while 64KB Flash supports embedded firmware, parameter storage, and moderate protocol stacks. Designers must budget flash and SRAM carefully for networking, diagnostics, and logging features. For PCB implementation, place decoupling capacitors beside the supply pins, route sensitive analog inputs away from fast digital switching, and maintain the voltage and decoupling requirements stated in the manufacturer datasheet. The exposed 5V tolerance and enhanced EMC behavior do not remove the need for correct grounding, filtering, and enclosure design in electrically noisy installations. This product page consolidates the verified device identity, package, memory configuration, clock rate, lifecycle information, sourcing path, compatible family members, and practical selection guidance. It also distinguishes verified drop-in candidates from devices that merely perform similar functions, helping engineers make a PCB-compatible replacement decision rather than relying on broad functional equivalence.

RFQ Contact
MKE14F512VLL16 - Kinetis KE14F 168MHz Cortex-M4F 512KB | NXP
MKE14F512VLL16

MKE14F512VLL16 - Kinetis KE14F 168MHz Cortex-M4F 512KB | NXP

The NXP MKE14F512VLL16 is a Kinetis KE14F microcontroller featuring an ARM Cortex-M4F core running up to 168 MHz with 512 KB of Flash and 64 KB SRAM in a 100-pin LQFP package. It targets 5V-tolerant, robust industrial applications that require deterministic real-time control with rich communication peripherals. A microcontroller (MCU) is a single-chip computer containing a CPU core, Flash program memory, SRAM, and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces (UART, SPI, I2C, CAN), and GPIOs. Within the broader semiconductor taxonomy, MCUs belong to integrated circuits > microcontrollers, sitting between simple 8-bit controllers and full applications processors, and form the core of virtually every embedded system. Key features of the MKE14F512VLL16 include an ARM Cortex-M4F core with single-precision FPU and DSP extensions, 512 KB of on-chip Flash plus 64 KB FlexMemory for EEPROM emulation, 64 KB SRAM, and a high-accuracy 8-channel analog-to-digital converter supporting 12-bit resolution. The device also integrates CAN 2.0B (FlexCAN), multiple UART/SPI/I2C interfaces, a low-power run, wait, and stop modes with multiple wake-up sources, and operates across an extended industrial temperature range from -40C to +105C. The 5V-tolerant I/O enables direct interfacing with legacy industrial sensors and actuators without level shifters. Architecturally, the KE14F combines an efficient Cortex-M4F core with a tightly-coupled peripheral set including a flexible low-power timer subsystem, a motor-control-grade PWM module, and a robust ESD/EMC protection scheme. The integrated FlexCAN module is specifically hardened for industrial CAN networks, and the dual-watchdog architecture with an independent clock source enhances functional safety for safety-critical systems. Typical applications include industrial motor control (BLDC, PMSM, and stepper drives), CAN-enabled building automation nodes, factory automation PLCs and remote I/O, smart energy meters, lighting control systems, and HVAC controllers. The 5V-tolerant GPIO simplifies interfacing with industrial sensors that operate at 5V logic levels. When designing with this device, the engineer must respect the supply decoupling guidelines, route the high-speed analog reference (VREFH) with low-noise traces, and ensure the JTAG/SWD trace length is matched for reliable in-circuit programming. Compared with Kinetis E lower-tier variants, the KE14F adds an FPU and larger memory, making it the preferred choice when floating-point DSP workloads and code density matter. This page synthesizes distributor pricing, drop-in alternatives sourced from NXP's Kinetis KE1xF family, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
MKE14F512VLL16557 - 168MHz Cortex-M4F 512KB MCU | NXP
MKE14F512VLL16557

MKE14F512VLL16557 - 168MHz Cortex-M4F 512KB MCU | NXP

The NXP MKE14F512VLL16557 is an ARM Cortex-M4F microcontroller from the Kinetis KE1xF family, featuring a 32-bit core running up to 168 MHz with single-precision FPU and DSP instructions, 512 KB of Flash, and packaged in a 100-pin LQFP (14x14 mm). It targets cost-sensitive industrial and automotive-grade embedded applications where deterministic performance, large memory, and a rich peripheral set are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and RAM), and a wide range of peripherals such as timers, ADC/DAC, communication interfaces, and GPIOs into a single IC. Within the broader semiconductor taxonomy, the MKE14F512VLL16557 sits under microcontroller -> embedded processor -> integrated circuit -> semiconductor, and within NXP's portfolio under Kinetis E series -> ARM Cortex-M4 based MCU. The Cortex-M4F architecture adds IEEE 754 single-precision floating-point and DSP extensions, enabling efficient execution of control-loop algorithms, signal processing, and motor-control math. Key features of this part include 512 KB program Flash, 64 KB SRAM (typical KE1xF configuration), a 12-bit ADC with up to 1 MSPS conversion rate, multiple FlexTimer modules, up to four UART modules, two SPI and two I2C ports, and a CAN 2.0B interface. The device supports operating voltages from 2.7V to 5.5V and an industrial temperature range of -40C to +105C. Technically, the KE1xF family is built on a 90 nm flash process and uses an ARM Cortex-M4F core with a 3-stage pipeline. The 168 MHz core mark delivers 1.25 DMIPS/MHz, sufficient for closed-loop motor control and real-time industrial protocols. The integrated FPU eliminates the need for an external math coprocessor, while DSP instructions accelerate FFT and FIR filter operations used in sensor conditioning. Typical applications include industrial motor control (BLDC/PMSM), building automation, smart metering, HVAC control, point-of-sale terminals, and human-machine interface (HMI) panels. The large 512 KB Flash and broad peripheral mix make it well-suited for protocol stacks such as Modbus, CANopen, and PROFINET that demand both memory and real-time determinism. When designing with the MKE14F512VLL16557, ensure decoupling capacitors are placed close to the multiple VDD/VSS pin pairs of the 100-LQFP package and that the analog supply (VDDA) is filtered separately to achieve the ADC's specified SNR. The NXP Kinetis SDK and Processor Expert configuration tools provide pin-muxing and peripheral initialization code, significantly reducing firmware bring-up time. This page synthesizes distributor pricing (as of 2026-10-19), same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ Contact
MKE15Z128VLH7557 - 128KB Flash Cortex-M0+ 72MHz MCU | NXP
MKE15Z128VLH7557

MKE15Z128VLH7557 - 128KB Flash Cortex-M0+ 72MHz MCU | NXP

The NXP MKE15Z128VLH7557 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE1xZ family, featuring 128 KB of flash memory, a 72 MHz CPU core, and an integrated 64-pin LQFP (10x10 mm) package optimized for automotive and industrial control applications. As a member of the KE15Z sub-family, it targets cost-sensitive embedded designs that require a balance of low power consumption, robust peripherals, and automotive-grade reliability. What is a Cortex-M0+ microcontroller? An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) processor core designed by ARM Holdings for ultra-low-power embedded applications. The Cortex-M0+ architecture sits within the broader ARM Cortex-M family (M0, M0+, M3, M4, M7, M33) and provides a bridge between 8/16-bit legacy microcontrollers and higher-performance Cortex-M3/M4 cores. It belongs to the larger taxonomy of microcontrollers (MCU) -> embedded processors -> semiconductors, and it is widely used in automotive body electronics, industrial sensor nodes, and consumer devices where deterministic real-time performance and low active/standby power are critical. Key features of the MKE15Z128VLH7557 include 128 KB of on-chip flash for program storage, up to 72 MHz core frequency with a single-cycle 32-bit x 32-bit multiplier for efficient signal processing, and a comprehensive set of on-chip peripherals. The device integrates multiple low-power modes (Wait, Stop, VLPR, VLPS), hardware CRC, and a flexible interrupt controller to support deterministic real-time operation. The 64-pin LQFP (10x10 mm) package offers ample I/O count for mixed-signal designs while remaining compatible with standard SMT assembly lines. Architecturally, the KE15Z leverages a Cortex-M0+ core with a single AHB-Lite bus matrix connecting flash, SRAM, and peripherals. The 72 MHz operating frequency enables execution of 90 DMIPS (1.25 DMIPS/MHz), and the integrated memory protection unit and bit-banding aliasing provide deterministic memory access for safety-critical applications. An on-chip voltage regulator supports a wide operating voltage range, and the analog mix includes multiple 12-bit ADCs with configurable resolution and sample rates suitable for sensor interface circuits. Typical applications include automotive body controllers, HVAC control modules, seat adjustment ECUs, industrial sensor hubs, low-end motor control, and battery-powered IoT edge nodes. The combination of automotive-grade qualification, robust peripherals, and low-power operation makes it well-suited to designs that must pass stringent automotive EMC and ESD requirements. When designing with the MKE15Z128VLH7557, verify the latest Kinetis KE1xZ reference manual for the complete peripheral pin-out and clock-tree configuration. The 64-pin LQFP package requires a 10x10 mm PCB footprint with 0.5 mm pitch; verify pin 1 orientation against the package marking to avoid reverse-mount failures during production. This page synthesizes distributor pricing, drop-in alternatives within the same LQFP-64 footprint, and practical design considerations not consolidated in the manufacturer datasheet, enabling faster component selection and qualification for automotive and industrial projects.

RFQ Contact
MKE15Z256VLH7 - 72MHz Cortex-M0+ MCU 256KB Flash | NXP
MKE15Z256VLH7

MKE15Z256VLH7 - 72MHz Cortex-M0+ MCU 256KB Flash | NXP

The NXP Semiconductors MKE15Z256VLH7 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE1xZ family, operating up to 72 MHz with 256 KB of Flash and 32 KB of SRAM, housed in a 64-pin LQFP (10x10 mm) package. It supports a wide 3.3 V to 5.5 V supply range, making it well suited for both 3.3 V and 5 V industrial and consumer designs. The device integrates an ARM Cortex-M0+ core delivering 0.93 DMIPS/MHz, with peripheral IP optimized for mixed-voltage signal-chain applications. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (RAM), and integrated peripherals such as timers, ADCs, and communication interfaces. Within the broader semiconductor taxonomy, the MKE15Z256VLH7 sits under: microcontroller -> 32-bit MCU -> ARM Cortex-M0+ MCU -> low-power main-stream MCU -> embedded system-on-chip. Kinetis KE1xZ devices target cost-sensitive industrial and consumer applications where Cortex-M0+ efficiency, low power, and 5 V tolerance are simultaneously required. Key features of the MKE15Z256VLH7 include a 12-bit SAR ADC with up to 16 channels, multiple high-resolution FlexTimers, an integrated touch-sensing interface (TSI), and a flexible serial communication set including UART, SPI, and I2C. The on-chip 32 KB FlexMemory supports EEPROM emulation and customer-configurable data-flash partitioning. The 64-pin LQFP package exposes a rich peripheral set while maintaining a compact 10x10 mm footprint suitable for hand-soldered prototypes and high-volume reflow assembly. Architecturally, the KE1xZ family combines an ARM Cortex-M0+ core with a low-power platform featuring multiple run, wait, and stop modes. The 5 V-tolerant I/O ring enables direct interface to legacy 5 V analog and digital signals without level shifters. Hardware CRC, a random-number generator, and flash access control provide basic security features. The integrated TSI module supports robust proximity and touch-button interfaces without external components. Typical applications include industrial control and HMI, home appliances with user interfaces, low-end motor control, smart lighting, IoT edge nodes, and battery-powered sensors. The wide 3.3 V to 5.5 V supply range and integrated touch sensing make it especially attractive for appliance front panels, climate-control thermostats, and white-goods control boards. When designing with this part, place 0.1 µF decoupling capacitors close to each VDD pin and follow the reference manual's analog and digital grounding recommendations to maximize ADC performance. Use NXP's MCUXpresso IDE and the Kinetis KE1xZ SDK for software development, and consider the MKE15Z256VLL7 LQFP-100 sibling if additional GPIO is needed. This page synthesizes distributor pricing, drop-in alternative MPNs from the same Kinetis KE1xZ family, application notes, and design considerations not consolidated in the manufacturer datasheet, giving engineers a faster engineering and sourcing reference.

RFQ Contact
MKE15Z256VLH7557 - 72MHz Cortex-M0+ 256KB MCU | NXP
MKE15Z256VLH7557

MKE15Z256VLH7557 - 72MHz Cortex-M0+ 256KB MCU | NXP

The NXP Semiconductors MKE15Z256VLH7557 is a 32-bit Arm Cortex-M0+ microcontroller in the Kinetis KE1xZ family, running at up to 72 MHz with 256 KB flash, 32 KB RAM, and a 64-pin LQFP (10x10 mm) surface-mount package. The device operates from a 2.7 V to 5.5 V supply and provides 58 general-purpose I/O lines with DMA support. A microcontroller (MCU) is a single integrated circuit that combines a processor core, nonvolatile program memory, SRAM, and a rich set of peripherals on one die, sitting at the heart of the embedded-system hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor device. The Kinetis KE1xZ series targets cost-sensitive applications that need more flash and peripheral integration than 8-bit MCUs while keeping the ultra-low power and simple programming model of the Cortex-M0+ core. Key features include the 72 MHz Arm Cortex-M0+ core with single-cycle I/O access, 256 KB of on-chip flash program memory, 32 KB of SRAM, and 2 KB of FlexRAM that can be used for EEPROM emulation, eliminating the need for an external EEPROM in many designs. Peripherals include ADC channels, PWM (FTM) timers, UART, SPI, and I2C serial interfaces, plus a broad set of security features described on the NXP product page. Technically, the KE1xZ family pairs the low-gate-count Cortex-M0+ pipeline with a crossbar bus fabric and DMA, allowing peripherals to move data without CPU intervention. The 5 V-tolerant supply range of 2.7 V to 5.5 V lets the MCU connect directly to industrial 5 V logic, reducing level-shifting circuitry and bill-of-material cost compared with 3.3 V-only Cortex-M parts. Typical applications include industrial control and factory automation nodes, home-appliance and motor-control boards using the PWM and ADC peripherals, consumer electronics with human-machine interfaces, and 5 V legacy system upgrades replacing aging 8-bit MCUs. When designing with this device, verify the temperature-grade and packaging suffix in the ordering code (the 7557 suffix indicates the tray packaging option) and confirm that the FlexRAM EEPROM-emulation allocation matches your data-retention requirements per the NXP datasheet. This page synthesizes distributor pricing from LCSC, DigiKey, and Octopart, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ Contact
MKE15Z256VLL7557 - 72MHz Cortex-M0+ MCU 256KB Flash LQFP-100 | NXP
MKE15Z256VLL7557

MKE15Z256VLL7557 - 72MHz Cortex-M0+ MCU 256KB Flash LQFP-100 | NXP

The NXP MKE15Z256VLL7557 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE1xZ family, integrating 256 KB of flash memory, 72 MHz CPU performance, and a 100-pin LQFP (14x14 mm) package. This Freescale-derived part supports 2.7V to 5.5V supply operation and is engineered for cost-sensitive industrial, motor control, and automotive body applications that require reliable 32-bit processing without the power envelope of higher-end Cortex-M4 devices. An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) core based on the ARMv6-M architecture, optimized for energy-efficient embedded designs. Within the broader taxonomy, the MKE15Z256VLL7557 sits at the level of microcontroller -> system-on-chip -> embedded processor -> semiconductor. The M0+ core delivers 0.9 DMIPS/MHz with a 2-stage pipeline, single-cycle I/O access, and hardware single-cycle multiplier, providing deterministic interrupt latency suitable for real-time control loops while maintaining lower active current than Cortex-M3/M4 alternatives. Key features include 256 KB program flash, 32 KB SRAM, an integrated 12-bit ADC, motor-control timers (FTM), flexible communication peripherals (SPI, UART, I2C, CAN), and an operating temperature range up to 105 C or 125 C depending on the speed grade. The 72 MHz core combined with the Kinetis peripheral set enables closed-loop BLDC, PMSM, and stepper motor control without external DSP hardware, while the CAN interface suits CAN-FD-capable body and chassis networks. Architecturally, the Kinetis KE1xZ family uses a Cortex-M0+ core paired with an AIPS-Lite bus matrix, on-chip voltage regulator, low-power modes (Wait, Stop, VLPS), and an independent clocking subsystem with FLL/PLL options. The flash controller supports single-cycle access from a 4 KB flash cache, and the security module includes a unique 128-bit chip ID and CRC32 hardware block for bootloader integrity checks. Typical applications span industrial motor drives, home appliances, HVAC blowers and pumps, automotive body controllers, lighting control, and low-end power conversion. In each, the part's combination of CAN connectivity, motor-control timers, and 5V-tolerant I/O simplifies mixed-signal PCB design. Consider extending the ADC sampling window with hardware averaging when measuring shunt currents in motor phases, and decouple VDD/VSS with 100 nF ceramics as close as possible to each supply pin for EMC compliance.

RFQ Contact
MKE16Z32VLF4 - 48MHz 32KB Cortex-M0+ MCU | NXP | 48-LQFP
MKE16Z32VLF4

MKE16Z32VLF4 - 48MHz 32KB Cortex-M0+ MCU | NXP | 48-LQFP

The NXP Semiconductors MKE16Z32VLF4 is a 32-bit Arm Cortex-M0+ Kinetis KE1xZ microcontroller operating at up to 48 MHz, with 32 KB of Flash memory and a 48-LQFP 7 x 7 mm package. It supports 3.3 V and 5 V main-stream operation and integrates CAN control, NXP Touch sensing, analog features, and FlexIO capabilities for automotive and industrial systems. A microcontroller is a semiconductor that integrates a processor core, programmable memory, peripheral interfaces, and I/O into one compact device. The Cortex-M0+ architecture uses the Arm instruction set and provides a low-complexity platform for embedded control. Within the product hierarchy, MKE16Z32VLF4 belongs to the Cortex-M0+ microcontroller, embedded processor, and semiconductor categories, combining deterministic control with communication and touch-capable peripherals. The principal features include a 48 MHz maximum clock, 32 KB Flash, 4 KB SRAM, a 48-LQFP package, CAN connectivity, and NXP Touch sensing through the TSI peripheral. Its 3.3 V and 5 V operating support allows deployment across common industrial and automotive supply environments. The combination of local flash, a compact package, and multiple communication functions makes the device suitable for systems that need flexible sensing and network connectivity without a separate high-performance processor. The KE1xZ architecture is intended for cost-conscious embedded applications requiring broad peripheral integration. Flash provides executable program storage, while SRAM supports working memory for control logic and communication stacks. FlexIO adds programmable interface flexibility, while the CAN controller supports industrial networking. NXP Touch sensing supports touch keys, sliders, and rotary controls, reducing the need for discrete input devices in control panels and compact human-interface equipment. Typical uses include automotive body and comfort modules, industrial controllers, CAN-connected sensors, touch-equipped control panels, building equipment, and compact embedded systems. Its 48 MHz Cortex-M0+ core is sufficient for supervisory control, protocol handling, state-machine logic, and peripheral coordination. Applications requiring larger code storage should be evaluated separately, because this MPN contains 32 KB rather than 64 KB of Flash. PCB design should preserve the manufacturer's recommended power, decoupling, clock, and decoupling-capacitor placement. The 48-LQFP footprint requires adequate fan-out routing and careful inspection of exposed power and ground pins. Firmware changes should also account for the 32 KB Flash ceiling and the MCU's peripheral multiplexing rather than assuming every connector or peripheral signal is simultaneously available. This product record combines device specifications, source links, application guidance, design considerations, and like-for-like Kinetis family alternatives. It is intended to help engineers establish whether the 48 MHz Cortex-M0+ core, 32 KB Flash, CAN, touch sensing, and 48-LQFP package fit the mechanical and electrical requirements of an embedded design.

RFQ Contact
MKE16Z64VLD4 - 48MHz 64KB Cortex-M0+ MCU | NXP
MKE16Z64VLD4

MKE16Z64VLD4 - 48MHz 64KB Cortex-M0+ MCU | NXP

NXP Semiconductors MKE16Z64VLD4 is a 32-bit Kinetis KE1xZ microcontroller with an Arm Cortex-M0+ core, a 48 MHz operating frequency, and 64 KB of embedded flash. The device is packaged in a 44-LQFP 10 x 10 mm surface-mount package. It integrates NXP Touch sensing technology, CAN control, and a 5 V main-stream interface for embedded motor, communications, and industrial-control designs. A microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The Arm Cortex-M0+ architecture belongs to the microcontroller processor hierarchy and supports compact, energy-efficient embedded control. Within the Kinetis family, the KE1xZ series combines a general-purpose Arm core with touch sensing and CAN connectivity for cost-sensitive industrial and automotive applications. Three headline capabilities define the MKE16Z64VLD4. Its Cortex-M0+ processor operates at 48 MHz for responsive control-loop execution. Its 64 KB flash stores the application program, while the 64 KB configuration is identified as 64K x 8. Integrated NXP Touch sensing supports capacitive user-interface implementations, and the CAN interface enables communication with automotive, industrial, and embedded network nodes. The 44-LQFP package provides 44 accessible leads around a compact 10 x 10 mm body. This package is larger and easier to inspect or prototype than the smallest leadless MCU packages, while remaining suitable for automated surface-mount assembly. The MKE16Z64VLD4 is identified as automotive-grade by the NXP product listing, making the family applicable to projects where automotive temperature qualification, traceability, and long-term product planning are important. Typical uses include touch-controlled industrial panels, motor-control modules, CAN-connected vehicle accessories, building automation controllers, and compact embedded gateways. The touch interface can reduce mechanical controls in equipment housings, while CAN supports robust communication over a multi-node network. Firmware developers can also use the MCU for sensor aggregation, actuator supervision, and local control functions that require deterministic peripheral handling. When designing a PCB around the MKE16Z64VLD4, follow the NXP pin-description table and the 44-LQFP land pattern exactly. Confirm the selected peripheral pins against the firmware configuration, provide the manufacturer-specified decoupling and oscillator components, and validate signal levels on the communications interfaces. Do not infer package dimensions, temperature ratings, SRAM capacity, or pin functions without checking the current manufacturer datasheet. This product page combines the verified manufacturer and distributor specifications with practical PCB guidance, structured comparisons, same-family replacement options, and application-focused design context. It is intended to help engineers identify the correct device, verify compatibility, and move from component selection to a robust embedded design more efficiently.

RFQ Contact
MKE16Z64VLF4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP
MKE16Z64VLF4

MKE16Z64VLF4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP

The NXP Semiconductors MKE16Z64VLF4 is a 32-bit Arm Cortex-M0+ Kinetis KE1xZ microcontroller operating at up to 48 MHz, with 64 KB of Flash memory and 8 KB of RAM in a 48-pin LQFP package measuring 7 mm by 7 mm. It supports 3.3 V and 5 V operation and integrates NXP Touch capacitive-sensing interfaces and CAN control. A microcontroller is a programmable system-on-chip used to acquire sensor data, control actuators, and manage communication interfaces in embedded equipment. The Kinetis KE1xZ family combines an Arm Cortex-M0+ processor, embedded Flash and SRAM, timers, and mixed-signal peripherals in one low-power package. Its place in the device hierarchy is microcontroller, embedded processor, integrated circuit, and semiconductor. The MKE16Z64VLF4 provides 64 KB of Flash for program storage and 8 KB of SRAM for working memory. Its 48 MHz Cortex-M0+ core handles real-time control tasks, while the NXP Touch interface supports capacitive sensing. CAN control adds a communication path for industrial and automotive control systems, while operation from 3.3 V and 5 V simplifies power-supply integration across 5 V and 3.3 V equipment. Architecturally, the Cortex-M0+ processor provides a compact instruction set and deterministic interrupt-driven execution suitable for embedded control. Dedicated timer functions support periodic measurement, motor-control, and timing tasks. The combination of local Flash, SRAM, touch sensing, and CAN reduces the number of external devices required when a compact control platform must combine human-interface sensing with reliable communications. Typical applications include automotive body-control modules, industrial sensor controllers, capacitive-touch user interfaces, motor-control subsystems, and CAN-connected industrial equipment. The 48-LQFP package is especially useful where a fine-pitch leaded package is preferred for inspection, hand rework, or automated through-hole-compatible assembly processes. Designers should confirm the exact pin functions, peripheral routing, clock configuration, and programming requirements against the NXP KE1xZ documentation before layout release. Power rails must meet the device voltage limits, and both CAN and touch-sensing routes require careful separation from noisy power or actuator paths to preserve signal integrity. This product page combines the NXP device description with package, memory, interface, application, and procurement details, plus a focused comparison with same-package Kinetis alternatives. It also highlights the engineering checks that matter most when reusing a PCB, validating firmware, or planning production assembly.

RFQ Contact
MKE18F512VLL16557 - 512KB Flash Cortex-M4F MCU | NXP
MKE18F512VLL16557

MKE18F512VLL16557 - 512KB Flash Cortex-M4F MCU | NXP

The NXP MKE18F512VLL16557 is a Kinetis KE1xF family 32-bit ARM Cortex-M4F microcontroller with 512 KB of Flash, 168 MHz CPU clock, and a 100-pin LQFP (14x14 mm) industrial-grade operating range. It integrates a single-core Cortex-M4F core with FPU, DSP instructions, 64 KB SRAM, and the Kinetis peripheral set for mixed-signal embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripheral interfaces on a single silicon die. Within the embedded electronics taxonomy, this Kinetis KE1xF MCU sits at the intersection of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> automotive/industrial-grade MCU, providing deterministic real-time control with DSP capability. Key features include up to 168 MHz Cortex-M4F core with single-precision FPU, 512 KB on-chip Flash with ECC, 64 KB SRAM, 12-bit ADC with up to 16 channels, multiple FlexTimer/PWM modules, CAN-FD, I2C, SPI, UART peripherals, low-power run/wait/stop modes, and a wide operating voltage range of 2.7V to 5.5V. The device is qualified for industrial temperature -40C to +105C. The Kinetis KE1xF architecture uses a Cortex-M4F core with tightly-coupled SRAM and a multi-layer AIPS-Lite bus matrix, delivering deterministic interrupt latency below 30 cycles. The integrated power-management IC supplies core, I/O, and ADC reference rails with separate trim. The 100-pin LQFP package exposes the full peripheral set, including FlexIO and high-resolution timer channels, while exposing an industrial -40C to +105C temperature range for harsh-environment designs. Typical applications include industrial motor control, building automation, automotive body and chassis ECUs, smart sensor hubs, and low-cost CAN-FD nodes. The wide voltage range and built-in CAN-FD make the MKE18F512VLL16557 a strong fit for distributed control networks and 24V industrial buses. When designing with this MCU, ensure your linker script reserves the proper FlexNVM region for EEPROM emulation, and that the ADC reference pin decoupling follows the NXP application note layout. The 168 MHz CPU requires a wait-state configuration in the Flash controller for operation above 100 MHz. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. All data sources are listed for verification.

RFQ Contact
MKL02Z16VFG4 - 48MHz Cortex-M0+ 16KB Flash MCU | NXP
MKL02Z16VFG4

MKL02Z16VFG4 - 48MHz Cortex-M0+ 16KB Flash MCU | NXP

The NXP Semiconductors MKL02Z16VFG4 is a Kinetis KL02 series 32-bit microcontroller based on the Arm Cortex-M0+ core running at up to 48 MHz, with 16 KB flash memory, 2 KB SRAM, and a 16-pin QFN (3x3 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory (flash for code storage and SRAM for data), and peripherals such as timers, communication interfaces (UART, SPI, I2C), and analog-to-digital converters on one die. Within the power management hierarchy of embedded systems, MCUs occupy the application layer above sensor interfaces and below wireless SoCs. The Kinetis KL0x family is the entry point into the Kinetis L series and serves as a migration bridge for 8-bit MCU customers moving to 32-bit Arm Cortex-M0+ architectures. Key features of the MKL02Z16VFG4 include ultra-low-power operation optimized for battery-powered devices, a 48 MHz maximum core clock, 16 KB of on-chip flash program memory, 2 KB of SRAM, operation at a 3.3 V supply, and a compact 16-QFN footprint with exposed pad for improved thermal and ground performance. According to Arm Keil device documentation, the KL02 chip-scale-class package consumes 25 percent less PCB area and delivers 60 percent more GPIO than the nearest competitor device, making it one of the smallest Arm-powered microcontrollers available. Technically, the Cortex-M0+ core offers a two-stage pipeline and low gate count, achieving excellent energy efficiency in the uA/MHz range. The device is software and tool compatible with all other Kinetis L series devices, allowing a scalable migration path to larger flash densities (for example, MKL02Z32VFG4 with 32 KB flash in the same 16-QFN package) without board redesign. Typical applications include remote sensing nodes, portable consumer devices, ingestible healthcare sensing, small appliances, touch sensing, and simple motor control where low cost, small size, and low quiescent power are more important than raw processing throughput. Design consideration: because the flash density is only 16 KB, developers must use the Kinetis SDK with size-optimized (-Os) compilation; code growth beyond 16 KB requires pin-compatible migration to the MKL02Z32VFG4. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
MKL02Z16VFK4 - 48MHz Cortex-M0+ 16KB MCU | NXP | IoT
MKL02Z16VFK4

MKL02Z16VFK4 - 48MHz Cortex-M0+ 16KB MCU | NXP | IoT

The NXP MKL02Z16VFK4 is a 32-bit Arm Cortex-M0+ Kinetis KL02 microcontroller operating up to 48 MHz, with 16 KB of flash memory and a 24-QFN 4 x 4 mm package. It is designed for compact, low-power embedded products that need efficient 32-bit processing without the size or power requirements of a larger microcontroller. A microcontroller, or MCU, integrates a processor core, program memory, data memory, peripherals, and communication interfaces on one semiconductor device. The Kinetis KL02 belongs to the Kinetis L series of energy-efficient 32-bit MCUs. Its Cortex-M0+ core provides a simple instruction set and efficient code execution, while the KL0x family provides a migration path from 8-bit designs without changing the broader software tool compatibility used across the Kinetis L series. The MKL02Z16VFK4 combines a 48 MHz operating frequency with 16 KB of flash in a compact 24-QFN package. This combination is useful for compact sensor nodes, portable accessories, and control products where board area is limited. The NXP product page identifies the device as active, and its operating features emphasize low-power operation for battery-powered and energy-conscious designs. Within the system hierarchy, the MKL02Z16VFK4 is an Arm Cortex-M0+ MCU, a 32-bit microcontroller, and a member of the Kinetis L series. Its compact package supports high-density PCB layouts, while the Cortex-M0+ platform supports familiar embedded development workflows for control loops, digital interfaces, and low-power sensing products. The 3.3 V device is also identified in the product documentation as a 24-pin QFN device with an exposed thermal pad. Typical applications include small-format IoT sensors, portable health and wellness devices, remote sensing nodes, compact consumer accessories, and embedded control modules. In these systems, the 48 MHz processor can execute control and communication software while the 16 KB flash footprint limits firmware size. Designers should confirm the complete peripheral set, memory map, pin assignments, and electrical limits against the manufacturer datasheet before finalizing a PCB. A key design consideration is exposed-pad layout and thermal management. The 4 x 4 mm QFN has no large lead frame, so the exposed pad and copper pours provide the primary heat-spreading path. Place the device according to the manufacturer land pattern, maintain its recommended via arrangement, and verify decoupling requirements directly in the NXP datasheet. This product page combines the exact NXP identification, package, core, frequency, and memory information with engineering-oriented application guidance, structured comparisons, and design cautions. It is intended to help engineers identify the correct MCU, plan its PCB implementation, and evaluate family alternatives before requesting a quote.

RFQ Contact
MKL02Z16VFM4 - 48MHz Cortex-M0+ 16KB Flash MCU | NXP
MKL02Z16VFM4

MKL02Z16VFM4 - 48MHz Cortex-M0+ 16KB Flash MCU | NXP

The NXP Semiconductors MKL02Z16VFM4 is a 32-bit Kinetis KL02 microcontroller built around an Arm Cortex-M0+ core operating up to 48 MHz. It integrates 16 KB of flash memory and is supplied in a 32-pin 5 x 5 mm HVQFN package. The device belongs to the Kinetis L series, an entry-point portfolio for designers migrating from 8-bit systems while retaining a familiar microcontroller architecture. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic on one device. Within the broader hierarchy of embedded semiconductors, the MKL02Z16VFM4 is an MCU, then a 32-bit embedded processor, then an Arm Cortex-M0+ microcontroller. The Kinetis L series is positioned as an accessible, low-power platform for basic control, sensing, communications, and human-interface applications. The principal device characteristics are a 48 MHz operating frequency, 16 KB of flash memory, and a 32-pin HVQFN package. NXP describes the KL0x family as the entry point to the Kinetis L series and as software- and tool-compatible with other Kinetis L series devices. That compatibility provides a practical migration path when a design needs more memory, peripheral capability, or processing performance while retaining the same development ecosystem. The Cortex-M0+ architecture provides a compact instruction set, efficient event-driven execution, and broad suitability for embedded control. Its combination with integrated flash reduces the need for an external program-memory device in small systems. The 5 x 5 mm HVQFN package also supports compact PCB construction, although its exposed-pad and fine-pitch layout requirements make careful assembly and land-pattern design essential. Typical uses include building-control nodes, simple sensor-hub boards, appliance controllers, compact access-control modules, industrial monitoring equipment, and low-cost consumer accessories. In these systems, the MCU can consolidate periodic sensing, digital I/O control, communications, and local human-interface handling while limiting board area and component count. A primary design consideration is the package footprint. The 32-pin HVQFN has fine-pitch leads and a thermal or exposed pad that requires land-pattern and assembly-process compatibility. Firmware, startup code, clock configuration, and peripheral assignments should also be validated against the selected NXP development toolchain and the device's reference design before production release. This product page combines the confirmed device identity, lifecycle status, package information, source links, engineering applications, and carefully qualified replacement considerations. It also identifies parameter gaps explicitly rather than inferring unconfirmed electrical, environmental, or lifecycle details, helping engineers make more reliable design and sourcing decisions.

RFQ Contact
MKL02Z32VFG4 - 48MHz 32KB Cortex-M0+ MCU | NXP
MKL02Z32VFG4

MKL02Z32VFG4 - 48MHz 32KB Cortex-M0+ MCU | NXP

NXP Semiconductors MKL02Z32VFG4 is an ultra-compact 32-bit Arm Cortex-M0+ Kinetis KL02 microcontroller operating at 48 MHz, with 32 KB of embedded Flash, 4 KB of SRAM, and integrated USB in a 16-QFN package measuring 3 x 3 mm. The part is designed for space-constrained industrial and consumer applications where processing performance, USB connectivity, and a small PCB footprint must coexist. Its 32-bit architecture provides substantially greater addressing capability than an 8-bit MCU while retaining the simplicity associated with entry-level embedded control. A microcontroller is a programmable embedded-control device that integrates a processor core, nonvolatile program memory, volatile working memory, peripherals, and communication interfaces onto one semiconductor package. The Kinetis KL02 family is positioned as an introductory Arm Cortex-M0+ platform, helping designers migrate from 8-bit architectures without changing the broader software ecosystem. MKL02Z32VFG4 combines that low-complexity architecture with USB capability in a compact surface-mount package. Three principal specifications define the device: a 48 MHz Cortex-M0+ core, 32 KB of Flash for firmware, and 4 KB of SRAM for working data. The 16-QFN package occupies only 3 x 3 mm, making it suitable for compact control, communication, sensor-interface, and auxiliary-processor boards. The integrated USB interface can support direct peripheral connectivity and reduces the need for a separate USB controller when a suitable board design and firmware are used. The Cortex-M0+ core provides a straightforward instruction set, deterministic control behavior, and a software-compatible path into the wider Arm Cortex-M ecosystem. Firmware can use 32 KB of Flash to hold the application, configuration, and boot code, while the 4 KB SRAM supports working variables, protocol buffers, and peripheral state. These memory resources are appropriate for compact embedded functions rather than resource-intensive graphical or high-bandwidth workloads. Typical uses include USB-connected data-acquisition modules, small industrial controllers, consumer accessories, sensor-hub boards, and compact embedded subsystems. In a data-acquisition design, the MCU can coordinate sensor readings and transmit results over USB. In an industrial controller, it can handle digital I/O, local monitoring, and communications within a restricted board area. The device also fits accessory and peripheral roles where a low-pin-count, low-power MCU provides local control alongside a host processor. PCB design should prioritize short, clean return paths and careful treatment of the exposed pad and its thermal connection. Place decoupling capacitors close to the appropriate supply pins, route sensitive communications away from noisy switching nodes, and follow the manufacturer’s pin-description table when assigning tracks. Confirm the exact pin names, exposed-pad connection, programming interface, and decoupling requirements against the manufacturer datasheet before releasing the layout. This product page combines the manufacturer’s core device characteristics with application guidance, parameter comparisons, and practical design notes. It distinguishes verified same-package replacements from alternatives that require a different footprint, helping engineers evaluate replacement options without assuming that a similar memory size or series designation guarantees pin compatibility.

RFQ Contact
MKL02Z32VFK4 - 48MHz 32KB Flash Cortex-M0+ MCU | NXP
MKL02Z32VFK4

MKL02Z32VFK4 - 48MHz 32KB Flash Cortex-M0+ MCU | NXP

The NXP Semiconductors MKL02Z32VFK4 is a 32-bit Arm Cortex-M0+ Kinetis KL02 microcontroller operating at up to 48 MHz, with 32 KB of flash memory and a 3.3 V supply, housed in a 24-QFN 4 x 4 mm package. It combines a compact footprint with general-purpose embedded-control resources for applications requiring low-cost, low-power 32-bit processing. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals into one device. The Kinetis KL02 family is the entry point into the Kinetis L series and provides a migration path from 8-bit designs to a 32-bit Arm architecture. Its small package is especially useful when board space, energy use, and low system complexity are primary design constraints. The MKL02Z32VFK4 provides a 48 MHz Cortex-M0+ core and 32 KB flash organized as 32K x 8 bits. Its 3.3 V operating supply supports compact embedded systems that require a low-power, general-purpose control platform. The 24-QFN package is only 4 x 4 mm, allowing the MCU to be used in space-constrained products without relying on a large-outline package. The Cortex-M0+ core is designed for efficient control-oriented execution rather than graphics or high-performance application processing. Code stored in flash remains available after power loss, while the integrated peripherals support communications, timing, and control functions in embedded products. NXP positions the KL02 family as software- and tool-compatible with other Kinetis L series devices, which can simplify development across related product variants. Typical applications include compact sensor nodes, portable health-monitoring products, industrial sensing modules, remote controls, low-power consumer accessories, and ingestible or wearable electronic products. Its 4 x 4 mm QFN format is especially beneficial when component placement, board area, and product weight must be minimized. PCB design should follow the manufacturer pinout and land-pattern guidance, including treatment of the exposed center pad and the thermal and electrical requirements associated with the QFN package. Place decoupling capacitors close to the supply pins and preserve the exposed-pad copper and thermal-via arrangement recommended by NXP. This page combines the exact device identity, operating characteristics, package information, sourcing guidance, application analysis, and engineering considerations needed to evaluate the MKL02Z32VFK4 for an embedded design.

RFQ Contact
MKL02Z32VFM4R - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP
MKL02Z32VFM4R

MKL02Z32VFM4R - 48MHz Cortex-M0+ MCU, 32KB Flash | NXP

The NXP Semiconductors MKL02Z32VFM4R is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KL02 family, delivering 48 MHz core performance with 32 KB of embedded Flash and 4 KB of RAM in a compact 32-pin HVQFN (5x5 mm) package with exposed thermal pad. It targets cost-sensitive, battery-powered applications where board area and energy budget are critical design constraints. Tape-and-reel packaging (suffix "R") supports high-volume SMT production. An ARM Cortex-M0+ microcontroller (MCU) is a 32-bit reduced instruction set computing (RISC) processor core that combines Thumb-2 instruction set efficiency with an ultra-low gate count, making it the lowest-power and smallest-footprint member of the ARM Cortex-M family. Kinetis microcontrollers integrate the Cortex-M0+ core with on-chip memory, analog peripherals, and low-power peripherals, forming a complete system-on-chip (SoC) within the broader microcontroller and embedded system hierarchy. Key features include 48 MHz maximum CPU frequency, 32 KB program Flash, 4 KB SRAM, an 8-channel 12-bit SAR ADC, one low-power UART, two SPI modules, one I2C module, a 6-bit timer/PWM module, and a real-time clock (RTC). Multiple low-power modes (Wait, Stop, VLPS, VLLS0/1/3) plus a low-power timer and low-power UART enable deep sleep currents in the microamp range, allowing years of operation from a single coin cell. The device leverages the Cortex-M0+ architecture with single-cycle I/O access, a hardware multiplier, and the Nested Vectored Interrupt Controller (NVIC). On-chip peripherals are interconnected through a flexible peripheral bridge, and the high-efficiency Cortex-M0+ pipeline keeps dynamic power consumption well below typical 8/16-bit MCUs at equivalent throughput. Typical applications include wearable fitness and health monitors, portable medical sensors, smart remote controls, battery-powered IoT sensor nodes, low-end consumer electronics, and electronic shelf labels (ESL). The combination of small package, low active power, and rich peripherals makes it ideal for any space-constrained, energy-harvesting or battery-operated product. When designing with this MCU, use the exposed thermal pad as the primary ground connection and stitch multiple vias beneath it to the internal ground plane to minimize ground bounce and improve thermal performance. Decouple VDD/VREFL with a 100 nF ceramic capacitor placed within 3 mm of the supply pins. This page synthesizes distributor pricing, same-family NXP alternatives, and practical design notes not consolidated in the manufacturer datasheet, giving engineers a single source for Kinetis KL02 selection and procurement.

RFQ Contact