بەرهەمەکان (3,600+)

AD676JD - 16-Bit 100 kSPS Parallel ADC | Analog Devices
AD676JD

AD676JD - 16-Bit 100 kSPS Parallel ADC | Analog Devices

The Analog Devices AD676JD is a 16-bit parallel-output sampling analog-to-digital converter packaged in a 28-pin CDIP. It uses switched-capacitor, charge-redistribution conversion to provide a 100 kSPS conversion rate with a 10 microsecond total conversion time. The AD676 is designed for precision signal acquisition where parallel data output, 16-bit resolution, and relatively high sampling speed are required. Its on-chip autocalibration uses digital correction to optimize performance by compensating internal nonlinearities. The AD676JD is the commercial-grade 28-pin plastic DIP ordering option associated with the AD676 family, while the AD676 family also includes a 28-pin side-brazed ceramic package and a separate serial-output AD677 family. The verified manufacturer material identifies the converter as multipurpose and highlights its 100 kSPS rate, 10 microsecond conversion time, 16-bit parallel output, single analog input, and switched-capacitor architecture. These characteristics make the AD676JD relevant to industrial instrumentation, process-control acquisition, laboratory measurement, communications, and embedded signal-processing systems where a parallel ADC interface can simplify connection to a digital bus or FPGA. The AD676JD is not a modern serial-interface ADC, so system designers should confirm logic levels, timing, bus width, acquisition sequencing, reference requirements, and input conditioning against the manufacturer datasheet before layout release. This page combines the verified ADI product description, available distributor and cross-reference information, and practical engineering guidance for evaluating AD676JD in a new design.

RFQ پەیوەندی
AD676JN - 16-Bit 100kSPS Parallel SAR ADC | Analog Devices
AD676JN

AD676JN - 16-Bit 100kSPS Parallel SAR ADC | Analog Devices

The Analog Devices AD676JN is a 16-bit, 100 kSPS parallel-output successive-approximation (SAR) analog-to-digital converter housed in a 28-pin plastic DIP (PDIP-28) package. It combines a switched-capacitor/charge-redistribution core with on-chip autocalibration, delivering 10 microsecond total conversion time, ±1 LSB INL maximum (no missing codes), 97 dB THD, and 90 dB signal-to-noise ratio. The integrated sample-and-hold amplifier accepts full-scale unipolar or bipolar input ranges from the on-chip reference or an external reference source. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that converts continuous analog voltages into discrete digital codes at a defined sample rate. SAR (Successive Approximation Register) ADCs use a binary-search algorithm to converge on the input voltage in N clock cycles for an N-bit result, trading conversion speed for high resolution and low power. Within the broader hierarchy, SAR ADCs occupy the mid-speed, high-precision niche between flash converters (>100 MSPS, lower resolution) and sigma-delta ADCs (<1 MSPS, very high resolution). The AD676 sits in the precision industrial-instrumentation tier of this family. Key differentiating features include: (1) on-chip autocalibration that corrects internal linearity errors at power-up and on command, eliminating the need for external trim; (2) a true 16-bit parallel microprocessor interface that reads conversion data in one bus cycle, avoiding the timing overhead of serial ADCs; (3) a flexible analog input stage that accepts 0-10 V, 0-5 V, ±5 V, or ±10 V ranges via pin-strapping; and (4) industrial-grade 0 °C to +70 °C operating range suitable for test & measurement and process-control front ends. Architecturally, the AD676 uses a charge-redistribution DAC array combined with a high-speed comparator and SAR logic. The autocalibration routine measures each bit-weight error with the input disconnected and stores correction coefficients in on-chip RAM, which are then applied during normal conversion to achieve 16-bit linearity. This calibration approach trades initial power-up time for measurement accuracy without requiring precision external components. Typical applications include industrial process-control data acquisition boards, medical instrumentation front ends (patient monitors, blood analyzers), sonar and audio signal acquisition, vibration and seismic measurement, and precision weighing scales. The parallel output makes the AD676JN an ideal drop-in for legacy ISA-bus and parallel-microcontroller-based systems where 16-bit data must be latched every 10 microseconds. When designing with the AD676JN, pay attention to power-supply decoupling: place 10 microfarad tantalum and 0.1 microfarad ceramic capacitors within 5 mm of the +VCC and -VCC pins. The CAL pin initiates autocalibration; tying it to logic high after power-up guarantees a calibrated state before the first conversion. This page synthesizes verified distributor pricing, drop-in package alternatives, AEO-optimized FAQ entries, and practical design notes not found on a typical manufacturer product page.

RFQ پەیوەندی
AD676KD - 16-Bit 100 kSPS Parallel ADC | Analog Devices
AD676KD

AD676KD - 16-Bit 100 kSPS Parallel ADC | Analog Devices

The Analog Devices AD676KD is a 16-bit, single-input, parallel-output analog-to-digital converter designed for high-resolution signal acquisition. It uses a switched-capacitor charge-redistribution architecture and provides a 100 kSPS conversion rate with a 10 microsecond total conversion time. The device is available in a 28-pin ceramic DIP package, identified by the AD676KD ordering code, and is suitable for instrumentation, industrial measurement, and signal-processing systems requiring parallel data transfer. On-chip autocalibration digitally corrects internal nonlinearities, while an integrated sample-and-hold function supports acquisition from high-impedance sources. The verified product information identifies 16-bit resolution, one analog input, SAR-style conversion, and a 28-CDIP package. The AD676KD also provides no missing codes, 1 LSB typical INL, approximately 97 dB THD, 90 dB SNR, and 1 MHz full-power bandwidth according to the indexed datasheet snippet. These characteristics place it between general-purpose converters and high-speed parallel ADC architectures: the 100 kSPS rate is suitable for continuous measurement, while the 16-bit resolution preserves fine amplitude detail. The parallel output requires 16 data lines plus control and power connections, making board layout and digital bus interfacing important. The AD676KD is not a drop-in upgrade for every serial-output converter because pin count, output interface, package, reference requirements, and timing must all be checked. The AD677 is a different 16-pin serial-output version and is therefore not included as a drop-in alternative. This page combines verified manufacturer and distributor information with practical selection guidance, pricing context, and limitations where full datasheet values were not available in the supplied sources.

RFQ پەیوەندی
AD676KN - 16-Bit 100 kSPS SAR ADC | Analog Devices
AD676KN

AD676KN - 16-Bit 100 kSPS SAR ADC | Analog Devices

The Analog Devices AD676KN is a 16-bit, single-input, successive-approximation analog-to-digital converter with a parallel output interface, 100 kSPS conversion rate, and a 10 µs total conversion time in a 28-pin plastic DIP package. It is designed for general-purpose data acquisition where a 16-bit sampling ADC, autocalibration, and an integrated sample-and-hold function are required. An ADC is a data-acquisition semiconductor that converts an analog input voltage into a digital number for processing by a microcontroller, DSP, FPGA, or computer. The AD676 belongs to the successive-approximation ADC, or SAR ADC, family within the broader analog-to-digital converter and signal-conversion hierarchy. SAR converters repeatedly compare the sampled input against a reference-derived internal DAC, making them well suited to moderate-speed measurement and control systems. The AD676KN provides 16-bit resolution, one analog input, parallel data output, and a 100 kSPS sampling rate. Its on-chip sample-and-hold function allows the analog input to be captured during the conversion interval. The converter also provides autocalibration and no-missing-code operation according to the verified product information, while its 1 MHz full-power bandwidth supports higher-frequency signal sampling than its maximum specified conversion rate alone would suggest. Internally, the AD676 uses switched-capacitor charge-redistribution architecture rather than a flash or pipeline conversion structure. A parallel bus presents the newly converted 16-bit result directly to digital logic. This arrangement is appropriate for systems that can accommodate a 16-bit data bus and prioritize simple deterministic sampling over the lower pin count of a serial-output converter. Typical uses include industrial process monitoring, instrumentation, laboratory measurement, audio and waveform acquisition, and embedded control systems. The 100 kSPS rate is suitable for sensors and control signals that do not require megahertz sampling, while the 16-bit resolution provides more quantization levels than a lower-resolution converter. Designers should account for the AD676KN's parallel interface, analog supply and reference requirements, digital supply noise, and acquisition timing when laying out the PCB. Because the converter is a 28-pin plastic DIP, it is also mechanically suited to through-hole prototyping and legacy-style industrial boards rather than compact surface-mount assemblies. This page consolidates the verified AD676KN specifications, distributor pricing, temperature and package details, drop-in family alternatives, and practical selection guidance. It also clearly identifies parameters whose values require confirmation in the Analog Devices datasheet rather than inferring them from the product family.

RFQ پەیوەندی
AD676TD/883B - 16-Bit 100kSPS SAR ADC | Analog Devices
AD676TD/883B

AD676TD/883B - 16-Bit 100kSPS SAR ADC | Analog Devices

The AD676TD/883B is a 16-bit successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices, designed for high-precision data acquisition. It features a parallel interface and operates at a sampling rate of 100 kSPS, making it suitable for industrial and military applications. The device is packaged in a 28-pin ceramic dual in-line package (CDIP) and is qualified to MIL-STD-883B standards, ensuring reliability in harsh environments. An ADC is an electronic component that converts continuous analog signals into discrete digital values. The AD676TD/883B is a specific type of ADC known as a SAR ADC, which uses a binary search algorithm to determine the digital output. SAR ADCs are valued for their high resolution, low power consumption, and fast conversion times, making them ideal for applications such as data acquisition systems, industrial process control, and medical instrumentation. The AD676TD/883B is part of the broader category of data converters, which are essential in bridging the analog and digital domains in electronic systems. Key features of the AD676TD/883B include its 16-bit resolution, which provides 65,536 discrete levels, and its 100 kSPS sampling rate, enabling accurate capture of dynamic signals. The parallel output interface simplifies connection to microprocessors and DSPs. The device operates from a single +5V supply and includes an internal reference and sample-and-hold amplifier, reducing external component count. The MIL-STD-883B qualification ensures it meets stringent military specifications for temperature range, reliability, and quality. Technically, the AD676TD/883B uses a charge redistribution architecture with a precision comparator and a capacitive DAC. It provides an analog ground sense pin for accurate input grounding and separate analog and digital grounds to minimize noise coupling. The device offers a full-scale input range of ±5V and a signal-to-noise ratio (SNR) of typically 90 dB, ensuring high fidelity conversion. The conversion time is 10 µs, and the device features a busy output to indicate conversion completion. Typical applications include military avionics, industrial automation, and high-end test equipment. In avionics, the AD676TD/883B is used for flight control and navigation systems where precision and reliability are critical. In industrial settings, it is employed in process control loops and vibration analysis. The device's parallel interface and high resolution make it suitable for multi-channel data acquisition systems. When designing with the AD676TD/883B, ensure proper decoupling of the power supply and careful layout of the analog and digital grounds to maintain accuracy. The analog input should be driven by a low-impedance source to avoid sampling errors. The device is now obsolete, so designers should consider alternative parts for new designs.

RFQ پەیوەندی
AD677AD - 16-Bit 100 kSPS Serial ADC | Analog Devices
AD677AD

AD677AD - 16-Bit 100 kSPS Serial ADC | Analog Devices

The Analog Devices AD677AD is a 16-bit, serial-output sampling analog-to-digital converter capable of 100 kSPS conversion throughput. It uses switched-capacitor charge-redistribution architecture, with a total conversion time of 10 microseconds, and is offered in a 16-lead ceramic DIP package. The device is designed for applications that require accurate digitization of analog signals at moderate throughput. A sampling ADC is a mixed-signal semiconductor that samples an analog input and converts it into a corresponding digital value. Within the broader hierarchy of analog-to-digital converters, the AD677AD belongs to the successive-approximation-register, or SAR, ADC class. Unlike flash converters, a SAR ADC performs conversion through a sequence of comparisons. The AD677AD uses switched-capacitor charge redistribution as its conversion architecture and presents its converted data through a serial output. The principal verified specifications are 16-bit resolution, one analog input, 100 kSPS sampling rate, and 10 microseconds total conversion time. On-chip autocalibration digitally corrects internal nonlinearities, improving converter performance without requiring an external calibration system. These characteristics make the AD677AD relevant to industrial instrumentation, process-control equipment, data-acquisition systems, and embedded measurement platforms that need deterministic, serial-output conversion. The AD677 is a multipurpose converter rather than a dedicated automotive or audio device. Its serial interface can reduce the number of signal connections required on a circuit board compared with a parallel-output converter, although the exact interface timing, voltage ratings, reference requirements, and digital logic levels must be confirmed in the manufacturer datasheet before design release. System designers should also account for the acquisition cycle, reference accuracy, input bandwidth, input-range selection, and settling time surrounding each conversion. Typical applications include process monitoring, environmental measurement, laboratory instrumentation, industrial transducers, and general-purpose data-acquisition systems. In each case, the AD677AD provides the core conversion function while the surrounding design must supply the analog input network, voltage reference, clocking, digital interface, and required decoupling. System-level accuracy depends on the complete signal chain rather than nominal converter resolution alone. Because the AD677AD is marked LAST TIME BUY, engineers should confirm availability before starting new production designs. A component-level cross-reference search should be treated as an engineering starting point rather than proof of drop-in compatibility. Package construction, pinout, electrical limits, calibration behavior, interface timing, and lifecycle requirements must all be compared before any replacement is approved. This page consolidates the verified manufacturer and distributor information for AD677AD, documents unsupported parameters explicitly, and separates confirmed product facts from engineering assumptions. It also provides application-focused design guidance, sourcing questions, and a strict comparison framework for engineers evaluating whether the legacy ceramic-DIP converter remains suitable for an existing or maintenance-focused design.

RFQ پەیوەندی
AD677BD - 16-Bit 100 kSPS Serial ADC | Analog Devices
AD677BD

AD677BD - 16-Bit 100 kSPS Serial ADC | Analog Devices

The Analog Devices AD677BD is a 16-bit, single-input, serial-output sampling analog-to-digital converter with a 100 kSPS conversion rate and a 10 µs total conversion time. It uses switched-capacitor charge-redistribution architecture and is packaged in a 16-pin ceramic DIP. The converter is designed for instrumentation and data-acquisition systems requiring moderate speed, high nominal resolution, and a compact through-hole interface. A sampling ADC is a data-conversion IC that samples an analog voltage and converts it into a digital code. In the broader semiconductor hierarchy, the AD677BD belongs to the ADC/DAC class of data-conquisition and signal-processing ICs. Its internal switched-capacitor network uses charge redistribution to perform successive approximation, while on-chip autocalibration digitally corrects internal nonlinearities. The result is a converter designed to simplify the analog front end while retaining serial digital output for control systems, test equipment, and industrial measurement products. The AD677BD provides 16-bit resolution, 100 kSPS throughput, one analog input, and serial data output. It operates from +5 V and ±12 V supplies and typically consumes 450 mW with a 10 V reference or 360 mW with a 5 V reference during conversion. The separately supplied digital voltage reduces coupling from switching activity in the analog circuitry into the digital output domain. The converter's 10 µs conversion time permits continuous acquisition at its 100 kSPS maximum rate. The AD677 family is segmented onto two monolithic chips, with internal autocalibration used to optimize performance. Commercial and industrial temperature options exist in the family, but the exact temperature grade and calibration details for AD677BD should be confirmed against the manufacturer ordering information before deployment. Typical applications include industrial process monitoring, instrumentation, laboratory data acquisition, communications equipment, and embedded measurement systems. The serial interface reduces the number of interconnects compared with a parallel-output converter, while the 16-pin ceramic DIP supports conventional through-hole assembly. Board-level digital isolation and careful grounding remain necessary because the converter combines analog input, reference, clock, and serial-data paths on one package. Designers should verify reference voltage, input range, acquisition timing, supply sequencing, and clock requirements against the AD677 datasheet. The analog and digital supplies should be decoupled independently, and the input source must provide adequate settling time during the 10 µs conversion interval. Because the AD677BD is marked LAST TIME BUY, new production designs should verify availability and consider a currently supported converter rather than making an unqualified last-time-buy commitment. This page consolidates the verified manufacturer and distributor information for AD677BD, distinguishes the confirmed converter characteristics from unresolved ordering details, documents same-family replacement candidates, and adds practical design guidance for power, grounding, timing, and component-availability decisions.

RFQ پەیوەندی
AD677JD - 16-Bit 100 kSPS Serial ADC | Analog Devices
AD677JD

AD677JD - 16-Bit 100 kSPS Serial ADC | Analog Devices

The Analog Devices AD677JD is a 16-bit, serial-output, 100 kSPS sampling analog-to-digital converter in a 16-pin CDIP package, with a specified 0°C to 70°C operating-temperature range and 12 V nominal supply. It combines a serial interface, on-chip sample-and-hold function, and autocalibrating switched-capacitor/charge-redistribution conversion architecture. A sampling ADC converts an analog input into a digital code at a specified sample rate. The AD677JD belongs to the ADC and data-converter hierarchy, where its 16-bit resolution supports detailed measurement while its 100 kSPS rate handles rapidly changing analog signals. The serial output reduces pin count and supports compact instrument and industrial-control designs. Key verified features include 16-bit resolution, 100 kSPS throughput, no missing codes, on-chip autocalibration, −99 dB THD, 92 dB S/(N+D), and 1 MHz full-power bandwidth. The manufacturer describes the conversion process as switched-capacitor/charge redistribution with digitally corrected internal nonlinearities through on-chip autocalibration. The AD677 family is available in 16-pin narrow plastic DIP, 16-pin narrow side-brazed ceramic, and 28-lead SOIC packages. AD677JD is the 16-pin CDIP ordering variant identified in distributor data. Its operating range is 0°C to 70°C, making it appropriate for commercial-temperature instrumentation where that range is acceptable. Typical uses include industrial process measurement, laboratory data acquisition, sensor interfaces, waveform capture, and embedded measurement systems. Designers should verify supply tolerances, reference requirements, digital-interface timing, acquisition timing, and calibration behavior against the manufacturer datasheet before layout or firmware implementation. For AD677JD sourcing, compare distributor inventory, lifecycle status, and price as of 2026-10-22. The 16-pin DIP footprint is mechanically straightforward, but digital timing, analog input conditioning, and power-supply noise still determine practical performance.

RFQ پەیوەندی
AD677JN - 16-Bit 100 kSPS Serial ADC | Analog Devices
AD677JN

AD677JN - 16-Bit 100 kSPS Serial ADC | Analog Devices

The Analog Devices AD677JN is a 16-bit serial-output sampling analog-to-digital converter with a conversion rate of 100 kSPS, a 10 µs total conversion time, and a 16-pin narrow plastic DIP package. It accepts analog signals through an on-chip sample-and-hold function and provides no-missing-codes operation. The AD677JN is intended for precision signal acquisition where serial data transfer, calibration, and compact sampling are useful. According to the verified Analog Devices product information, the AD677 is also available in ceramic and SOIC configurations, while the JN suffix identifies the narrow plastic DIP option. A sampling ADC is a data-acquisition IC that samples an analog voltage and converts it into a digital code. The AD677 belongs to the ADC -> data converter -> analog signal-processing -> semiconductor hierarchy. Its switched-capacitor and charge-redistribution architecture supports 16-bit resolution at 100 kSPS, making it appropriate for industrial measurement, instrumentation, and control systems. The manufacturer describes on-chip autocalibration as a way to digitally correct internal nonlinearities and improve overall conversion performance. Key features include a 16-bit serial interface, a 100 kSPS sampling rate, an on-chip sample-and-hold circuit, and a stated full-power bandwidth of 1 MHz. The verified datasheet search result also identifies no missing codes, 99 dB THD, 92 dB S/(N+D), and a 10 µs conversion time. These figures describe the converter's acquisition and dynamic-performance capabilities, but exact signal-chain performance still depends on reference voltage, input amplitude, clocking, grounding, and PCB layout. The AD677 operates from +5 V and +12 V analog supplies, with a separate digital supply identified as VDD. Verified source material reports typical conversion consumption of approximately 450 mW with a 10 V reference and 360 mW with a 5 V reference. The separate digital supply helps reduce digital crosstalk, while the analog-ground sense connection allows the converter to reference the signal-source ground remotely. Those features are important when the ADC is placed near a sensor or analog front end rather than in a central digital section. Typical applications include industrial process monitoring, precision instrumentation, laboratory measurement, transducer acquisition, and embedded control systems. The serial output reduces parallel data-bus routing requirements, while autocalibration can simplify system-level accuracy planning. The principal design trade-off is that this older high-resolution ADC family is marked LAST TIME BUY, so new production designs should verify lifecycle availability, sourcing, and any applicable migration path before committing to the AD677JN. For PCB implementation, place input, reference, analog-ground, and digital-supply connections according to the manufacturer datasheet and keep the analog signal path compact. The verified material identifies a remote analog-ground sense function; use it as intended rather than treating every ground connection as electrically identical. This page synthesizes the verified datasheet snippets, lifecycle status, sourcing context, and practical application guidance without inventing unprovided electrical limits or pin assignments.

RFQ پەیوەندی
AD677JR - 16-Bit 100 kSPS Serial ADC | Analog Devices
AD677JR

AD677JR - 16-Bit 100 kSPS Serial ADC | Analog Devices

The Analog Devices AD677JR is a 16-bit, single-channel, serial-output sampling analog-to-digital converter rated for 100 kSPS conversion throughput and housed in a 28-lead SOIC package. It uses a switched-capacitor, charge-redistribution sampling architecture with a total conversion time of 10 microseconds. The device also incorporates an autocalibrating on-chip sample-and-hold function and digitally corrects internal nonlinearities to optimize conversion performance. A sampling ADC is a category of data-conversion IC that acquires an analog input voltage and converts it into a numeric code for processing, storage, or transmission. The AD677 belongs to the SAR ADC hierarchy, where successive approximation and charge redistribution convert the sampled voltage into a 16-bit digital result. As a precision data-acquisition IC, it provides a defined interface for instrumentation, industrial measurement, and embedded control systems. Key features include 16-bit resolution, no missing codes, a 1 MHz full-power bandwidth, a signal-to-noise ratio of 99 dB, and total harmonic distortion of 92 dB. Its 100 kSPS maximum throughput supports continuous measurement while keeping the serial output manageable. The analog circuitry operates from +5 V and ±12 V supplies, while the separate digital supply helps reduce digital crosstalk entering the analog conversion path. The AD677 combines a switched-capacitor sampling stage with on-chip autocalibration. During conversion, the sampled charge is redistributed to resolve a 16-bit code. Autocalibration corrects internal nonlinearities digitally, improving consistency without requiring a continuous external calibration sequence. According to the manufacturer datasheet, the converter typically consumes 450 mW with a 10 V reference and 360 mW with a 5 V reference during conversion. Typical uses include industrial process monitoring, precision instrumentation, sensor-interface equipment, laboratory measurement systems, and embedded data-acquisition modules. The 100 kSPS rate is appropriate for many slowly varying or periodically sampled analog signals, while the 1 MHz full-power bandwidth supports input signals with higher-frequency content when aliasing and sampling requirements are properly managed. When implementing the AD677JR, provide the specified analog and digital supplies, reference voltage, clocking, and decoupling arrangements recommended by the manufacturer. Because the converter accepts bipolar analog inputs in a system using ±12 V analog rails, input range, common-mode behavior, and overvoltage protection must be checked against the application rather than inferred solely from resolution and sampling rate. This page consolidates the verified manufacturer and distributor information for the AD677JR, clarifies its last-time-buy lifecycle status, identifies same-family drop-in candidates requiring temperature-grade verification, and adds practical selection and design guidance not presented as a single table in the manufacturer datasheet.

RFQ پەیوەندی
AD677KD - 16-Bit 100 kSPS Serial ADC | Analog Devices
AD677KD

AD677KD - 16-Bit 100 kSPS Serial ADC | Analog Devices

The Analog Devices AD677KD is a 16-bit, single-input, serial-output sampling ADC with a 100 kSPS conversion rate, supplied in a 16-pin plastic DIP package. It uses a switched-capacitor, charge-redistribution SAR architecture, completes conversion in 10 microseconds, and includes an autocalibrating on-chip sample-and-hold function. Key performance figures include no missing codes at 1 LSB, approximately 99 dB signal-to-noise performance, 92 dB total harmonic distortion, and a 1 MHz full-power bandwidth. A sampling ADC is a data-conversion IC that samples an analog input and converts it into a digital code for processing, measurement, or control. The AD677 belongs to the SAR ADC hierarchy, which combines sample-and-hold behavior with successive-approximation conversion. This architecture is useful where moderately high conversion rates, compact serialized data output, and precise measurement are more important than very high channel density. The AD677’s defining feature is its on-chip autocalibration, which digitally corrects internal nonlinearities to improve conversion accuracy. Its serial output reduces the number of signal interconnects compared with a parallel ADC, while the integrated sample-and-hold function simplifies analog front-end implementation. The 16-pin through-hole package also remains practical for legacy industrial, instrumentation, control, and educational platforms. Internally, the switched-capacitor and charge-redistribution architecture supports a nominal 100 kSPS throughput and a total conversion time of 10 microseconds. The advertised 1 MHz full-power bandwidth supports acquisition of higher-frequency input signals than the 100 kSPS conversion rate alone might suggest, although system-level settling, sampling, and anti-aliasing requirements still determine usable dynamic performance. Typical uses include industrial process measurement, laboratory instrumentation, sensor signal acquisition, industrial control, and embedded measurement systems. The device is especially appropriate when an existing 16-pin DIP footprint, serial interface, and conventional precision ADC architecture are required rather than a high-density mixed-signal converter. When designing around the AD677KD, pay particular attention to input range, reference voltage, digital interface timing, analog settling, and the sampling network. The available source information does not specify every pin function or operating limit, so those details should be confirmed directly in the manufacturer datasheet before a new PCB is released. This page combines verified manufacturer and distributor information, lifecycle status, package data, practical design considerations, and narrowly scoped drop-in alternatives. It also distinguishes confirmed specifications from unavailable details instead of inferring unverified electrical values.

RFQ پەیوەندی
AD677KN - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices
AD677KN

AD677KN - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices

The Analog Devices AD677KN is a 16-bit, serial-output, 100 kSPS sampling analog-to-digital converter housed in a 16-pin narrow plastic DIP package. It uses switched-capacitor charge-redistribution architecture, completes a conversion in 10 microseconds, and includes an on-chip autocalibrating sample-and-hold function with no missing codes. A sampling ADC is a data-acquisition device that samples an analog input voltage and converts it into a digital number. In the system hierarchy, the AD677KN is a serial-output ADC, a data converter, and a semiconductor integrated circuit. Its 16-bit resolution provides 65,536 digital codes, making it suitable for instrumentation and signal-acquisition systems where accurate conversion of a changing analog input is required without an extremely high sampling rate. Key features include a 16-bit resolution, a 100 kSPS conversion rate, serial output, an autocalibrating on-chip sample-and-hold function, and no missing codes. The manufacturer describes 99 dB THD, 92 dB signal-to-noise-plus-distortion performance, and 1 MHz full-power bandwidth. On-chip autocalibration digitally corrects internal nonlinearities, improving conversion consistency without requiring an external trimming procedure. The AD677KN is designed around a switched-capacitor charge-redistribution converter rather than a flash or pipeline architecture. Serial data output reduces the number of interface signals compared with a parallel ADC, which helps conserve board area and connector pins. The supplied distributor records identify the AD677KN as a single-input, single-SAR, 16-pin PDIP device with a 100 kSPS conversion rate. Typical uses include process-control instrumentation, industrial sensor interfaces, laboratory measurement equipment, audio and low-bandwidth signal acquisition, digital instrumentation, and embedded data-collection systems. The converter is appropriate where 16-bit resolution and 100 kSPS throughput are sufficient, but a multi-megasample-per-second flash or pipeline ADC would be unnecessary. The AD677KN is a last-time-buy product, so production continuity requires inventory planning, a documented last-time-buy order, or qualification of a verified alternative. Designers should also allow for the 10 microsecond conversion interval when defining acquisition timing and digital-sample cadence. This page combines manufacturer specifications, distributor lifecycle information, available same-family drop-in references, and practical design guidance. It distinguishes documented AD677KN facts from unavailable pricing and pin-level data, helping engineers make sourcing and design decisions without treating an unreported value as a manufacturer specification.

RFQ پەیوەندی
AD677KR - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices
AD677KR

AD677KR - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices

The Analog Devices AD677KR is a 16-bit, 100 kSPS sampling analog-to-digital converter with one serial output and a 28-lead SOIC package. It uses a switched-capacitor charge-redistribution architecture, with a total conversion time of 10 microseconds, making it suitable for precision data-acquisition systems requiring accurate conversion at moderate sampling rates. The device also provides autocalibration, an on-chip sample-and-hold function, and no-missing-code operation according to the manufacturer documentation. A SAR ADC is a successive-approximation analog-to-digital converter. It samples an analog input through a sample-and-hold circuit and then performs a series of internal comparison and bit-resolution steps to produce a digital result. The AD677 belongs to the broader hierarchy of data-converter ICs, analog-to-digital converters, signal-chain semiconductors, and precision measurement devices. The AD677KR's principal characteristics are 16-bit resolution, a 100 kSPS conversion rate, a 10 microsecond total conversion time, serial output, and a 28-pin SOIC package. Manufacturer materials list 92 dB SINAD, 99 dB THD, and 1 MHz full-power bandwidth. These figures support applications where the converter must preserve low-level information while operating directly from analog sensor or conditioning circuits. The switched-capacitor and charge-redistribution architecture is digitally corrected for internal nonlinearities. Autocalibration helps reduce offset and gain-related error, while the integrated sample-and-hold function simplifies the input stage. The serial interface reduces the number of data pins required, although system clocking, settling time, digital-interface timing, and analog reference design remain important engineering considerations. Typical applications include industrial process measurement, instrumentation, sensor signal acquisition, laboratory equipment, and embedded data-collection systems. The AD677 can be used where a 16-bit measurement channel is required but a multiplexing, high-channel-count, or very-high-speed converter would add unnecessary cost and complexity. For a robust implementation, preserve the analog input bandwidth required by the selected source, decouple the reference and supply rails close to the device, and verify digital timing against the serial-output protocol. Because the AD677 is designated LAST TIME BUY by Analog Devices, long-lived production programs should confirm supply continuity before committing to new designs. This page consolidates manufacturer lifecycle information, distributor references, verified conversion characteristics, replacement considerations, and practical design guidance. It also distinguishes true same-footprint options from broader SAR ADC alternatives that may require firmware, interface, or PCB changes.

RFQ پەیوەندی
AD678AD - 12-Bit 200 kSPS Flash ADC | Analog Devices
AD678AD

AD678AD - 12-Bit 200 kSPS Flash ADC | Analog Devices

The Analog Devices AD678AD is a 12-bit monolithic flash analog-to-digital converter with one single-ended analog input, a 200 kSPS conversion rate, and a parallel microprocessor-compatible interface. The device is supplied in a 28-pin ceramic dual in-line package. Its integrated blocks include a sample-and-hold amplifier, voltage-reference circuitry, clock-generation circuitry, and a bus interface. A flash ADC is a high-speed analog-to-digital converter architecture that converts an analog input through parallel internal comparisons. The AD678 belongs to the ADC, data-converter IC, and analog-signal-processing semiconductor hierarchies. It is intended for acquisition and signal-processing systems requiring 12-bit digital data at a rate up to 200 kSPS rather than the throughput of modern multi-gigahertz serial converters. The AD678AD's principal features include 12-bit resolution, one analog input, flash conversion, parallel data output, and a 200 kSPS sampling rate. Integration reduces the number of external components required for a complete conversion channel by combining the sample-and-hold amplifier, reference, clock generation, and processor interface in one package. The manufacturer also identifies the AD679 14-bit, 128 kSPS ADC as having the same pinout as the AD678, enabling a potential migration path when greater resolution or lower throughput is appropriate. The AD678 is specified for both dynamic and static behavior, including signal-to-noise plus distortion ratio, total harmonic distortion, and intermodulation distortion. These characteristics make converter performance relevant to signal processing rather than only to basic digital measurement. The parallel bus is suited to microprocessor systems that can capture the converter output directly, while the internal reference and clock circuitry provide a self-contained acquisition front end. Typical uses include industrial data acquisition, instrumentation, waveform measurement, communications signal processing, and laboratory or control systems. In a complete acquisition channel, the analog input enters the sample-and-hold amplifier, the flash conversion stage produces a 12-bit result, and the parallel interface transfers that result to a processor or programmable logic device. A design must still account for input bandwidth, source impedance, reference requirements, acquisition timing, and output bus timing. The primary design consideration is ensuring that the selected package variant, temperature grade, and qualification level satisfy the end application. AD678 versions are available in commercial and military-oriented configurations, but the supplied data does not establish the exact operating-temperature range for AD678AD. Engineers should therefore verify the ordering code, full electrical limits, and pin arrangement against the current Analog Devices data sheet before release to production. This product record consolidates the verified manufacturer and distributor information, package details, sourcing references, and same-family upgrade information for AD678AD. It also distinguishes documented characteristics from unverified fields and provides a practical framework for comparing the AD678 family when designing a 12-bit parallel sampling system.

RFQ پەیوەندی
AD678AJ - 12-Bit 200 kSPS Flash ADC | Analog Devices
AD678AJ

AD678AJ - 12-Bit 200 kSPS Flash ADC | Analog Devices

The Analog Devices AD678AJ is a monolithic 12-bit flash analog-to-digital converter capable of 200 kSPS, with one input, parallel microprocessor-compatible data output, and a 44-pin JLCC ceramic package. It integrates a sample-and-hold amplifier, voltage-reference circuitry, clock generation, and a digital interface in one device. The verified distributor description identifies 12-bit resolution, one input, one flash conversion cycle, and 200 kSPS throughput. An ADC converts an analog voltage into a numerical digital value. This flash ADC belongs to the data-converter hierarchy and uses parallel output data, making it suitable for systems where a controller, microprocessor, or programmable logic device reads each conversion through dedicated data lines. Its integrated sample-and-hold amplifier supports sampled acquisition, while the internal voltage reference and clock-generation circuitry reduce the external support components required by a complete measurement channel. The AD678AJ is specified for dynamic signal-processing performance, including signal-to-noise-plus-distortion ratio, total harmonic distortion, and intermodulation distortion. According to the Analog Devices product page, the AD678 shares its pinout with the 14-bit, 128 kSPS AD679, providing a documented upgrade path when a different resolution and conversion rate are acceptable. The same page also notes that MIL-STD-883-compliant versions are available, although the verified data does not establish that qualification for AD678AJ itself. Typical uses include industrial data acquisition, process-control instrumentation, waveform sampling, communications receivers, and embedded measurement systems. Designers should use the manufacturer datasheet for the complete electrical limits, acquisition timing, reference behavior, interface logic, pin names, and recommended operating conditions. The 44-pin JLCC package is not one of the canonical package-diagram keys used by this output library, so its exact pinout and package drawing must be checked directly against the AD678 datasheet. For replacement work, package and pinout compatibility must be established independently from functional similarity. AD678AJ is a through-hole 44-JLCC device; the verified cross-reference results do not identify a manufacturer-confirmed, same-package, pin-to-pin substitute. Distributor availability, pricing, and lifecycle status also require current quotation or inventory confirmation. This page combines the verified AD678 manufacturer information, distributor specifications, package details, upgrade-path information, and sourcing links. It is intended to support engineers evaluating the AD678AJ for precision sampling systems while clearly separating verified data from information that must be confirmed from the datasheet or an authorized distributor.

RFQ پەیوەندی
AD678BD - 12-Bit 200 kSPS Sampling ADC | Analog Devices
AD678BD

AD678BD - 12-Bit 200 kSPS Sampling ADC | Analog Devices

Analog Devices AD678BD is a 12-bit, 200 kSPS monolithic sampling analog-to-digital converter with one analog input and a microprocessor-compatible interface, housed in a 28-pin CDIP package. The converter integrates a sample-and-hold amplifier, voltage reference, clock-generation circuitry, and flash-conversion stage in one device. Its 12-bit resolution supports 4,096 digital codes, while the 200 kSPS sampling rate supports acquisition of dynamic analog signals at industrial signal-processing rates. A sampling ADC is an ADC that acquires an input voltage onto an internal sample-and-hold amplifier before converting it into a digital value. The AD678 belongs to the monolithic ADC hierarchy, combining multiple analog and digital functions on one semiconductor die. This integration reduces the number of external components required for a complete measurement channel while retaining the interface, reference, and clock functions needed for microprocessor-based data acquisition. The AD678BD's principal verified features include 12-bit resolution, a 200 kSPS conversion rate, one analog input, one flash-conversion stage, and a 28-pin CDIP package. The integrated sample-and-hold amplifier supports acquisition of time-varying signals, while the internal voltage reference and clock-generation circuitry simplify system implementation. According to the Analog Devices product page, the AD678 also provides the same pinout as the 14-bit, 128 kSPS AD679 ADC. Architecturally, the AD678 uses a complete monolithic conversion structure rather than requiring a separate sample-and-hold amplifier, reference, and flash ADC. This is important in signal-processing systems where the converter must accept rapidly changing inputs while presenting a digital result to a microprocessor or digital signal processor. The device is specified for both static conversion behavior and dynamic parameters such as signal-to-noise-plus-distortion ratio, total harmonic distortion, and intermodulation distortion. Typical applications include industrial process measurement, instrumentation, laboratory data acquisition, communications equipment, digital signal processing, and embedded control systems. The AD678 is also suitable for designs requiring a fully integrated sampling ADC with a microprocessor-compatible bus. The AD679 presents a relevant upgrade path because Analog Devices states that it uses the same pinout, although its 14-bit resolution and 128 kSPS maximum rate differ from the AD678. Designers should verify input range, acquisition timing, output coding, clock behavior, reference accuracy, and digital-interface timing against the current manufacturer datasheet before layout. The 28-pin CDIP package is intended for through-hole assembly and requires careful attention to thermal performance, analog grounding, and decoupling near the converter pins. Avoid treating the AD679 as an interchangeable performance replacement because its resolution and maximum sampling rate differ. This page consolidates verified manufacturer and distributor information, same-package replacement candidates, comparison parameters, and practical selection guidance. It distinguishes documented drop-in options from merely related converters and identifies all electrical, pricing, compliance, and pinout details that remain unverified in the supplied source data.

RFQ پەیوەندی
AD678BJ - 12-Bit 200 kSPS Sampling ADC | Analog Devices
AD678BJ

AD678BJ - 12-Bit 200 kSPS Sampling ADC | Analog Devices

The Analog Devices AD678BJ is a 12-bit, 200 kSPS complete sampling analog-to-digital converter in a 44-JLCC J-lead ceramic package measuring 16.39 mm by 16.39 mm. The monolithic device integrates a sample-and-hold amplifier, microprocessor-compatible parallel bus interface, voltage reference, and clock-generation circuitry. Its 12-bit resolution and 200 kSPS conversion rate are suitable for precision signal acquisition, industrial instrumentation, communications, and test equipment. The AD678BJ also offers an upgrade path from the 14-bit, 128 kSPS AD679 because the devices use the same pinout. An ADC is a data-acquisition IC that converts an analog voltage into a numeric value for processing, measurement, storage, or transmission. The AD678 belongs to the sampling-ADC hierarchy, combining an input sampling stage and quantization function on one monolithic device. This integration reduces the number of external signal-conditioning and conversion components required around a microprocessor or digital signal processor. Key verified features include 12-bit resolution, a maximum sampling rate of 200 kSPS, one analog input, and a flash-style parallel output interface. The integrated voltage reference and clock-generation circuitry simplify system implementation compared with a discrete ADC design. According to the Analog Devices AD678 product page, the AD678 is also specified for dynamic performance metrics including signal-to-noise-plus-distortion ratio, total harmonic distortion, and intermodulation distortion, which are important when evaluating sampled signal quality. The AD678BJ is identified as the B-grade, 44-JLCC J-lead package version and is available in a tube package. The ceramic J-lead construction is associated with high-temperature and controlled-environment applications, although detailed environmental limits and military qualification status must be confirmed in the exact orderable-device data sheet. The suffix-specific electrical grade, temperature range, screening options, and environmental ratings were not supplied in the verified product results. Typical uses include multichannel process monitoring, laboratory measurement systems, industrial transducers, communications receivers, and embedded acquisition systems. At 200 kSPS, the converter can sample waveforms at rates suitable for audio-band and general-purpose instrumentation. Systems requiring faster acquisition should evaluate higher-rate converters, while applications requiring more than 12 bits of resolution may consider the 14-bit AD679 when its lower 128 kSPS sampling rate remains acceptable. Designers should treat the ADC input, reference, clock, digital bus, and power connections as a complete mixed-signal layout. Short analog traces, adequate bypassing, controlled digital return currents, and a clean clock path help preserve converter performance. Verify input range, conversion timing, output coding, acquisition timing, and absolute maximum ratings against the exact AD678BJ data sheet before releasing production hardware. This product record combines manufacturer product information, distributor package and pricing data, lifecycle verification, replacement analysis, and practical selection guidance. It explicitly distinguishes verified AD678BJ characteristics from specifications that require confirmation from the complete manufacturer data sheet, helping engineers shorten component research without concealing uncertainty.

RFQ پەیوەندی
AD678JD - 12-Bit 200 kSPS Sampling ADC | Analog Devices
AD678JD

AD678JD - 12-Bit 200 kSPS Sampling ADC | Analog Devices

The Analog Devices AD678JD is a 12-bit, 200 kSPS, single-input flash analog-to-digital converter integrated into a 28-pin SBCDIP package. The monolithic converter includes a sample-and-hold amplifier, microprocessor-compatible bus interface, voltage reference, and clock-generation circuitry. Its 12-bit resolution and 200 kSPS conversion rate support compact, high-speed measurement systems where a complete sampling ADC is required rather than a collection of separate input, conversion, and interface components. An ADC is a data-conversion IC that transforms a continuous analog voltage into a numeric code for processing, measurement, or control. The AD678 belongs to the monolithic sampling ADC hierarchy, combining analog input conditioning, conversion, reference generation, clocking, and digital output in one device. This integration simplifies PCB design and reduces the number of external functional blocks required by microprocessor-based or embedded control systems. The AD678 provides one analog input, 12-bit output resolution, and a maximum conversion rate of 200 kSPS. Its flash-conversion architecture is intended for high-speed signal acquisition and supports dynamic-performance measurements including signal-to-noise-plus-distortion ratio, total harmonic distortion, and intermodulation distortion. According to the Analog Devices AD678 product page, the AD678 also provides an upgrade path to the 14-bit, 128 kSPS AD679 while retaining the same pinout. The converter is designed for signal-processing applications where dynamic accuracy matters. A complete sampling ADC architecture places the sample-and-hold function before the internal quantizer, helping the device acquire rapidly changing analog inputs while the conversion and digital interface operate. Its microprocessor-compatible output interface supports integration with embedded processors, while the internal voltage reference and clock circuitry reduce the external component count. Typical uses include industrial process measurement, instrumentation, industrial control, embedded data acquisition, and general-purpose signal processing. The 200 kSPS rate is suitable for sampled measurement systems that do not require video-rate conversion, while the 28-pin SBCDIP package supports through-hole assembly and maintenance-friendly legacy instrument upgrades. When designing a replacement or new circuit, verify the complete data-sheet pinout, input range, reference behavior, timing, and acquisition requirements rather than relying only on the 12-bit and 200 kSPS headline specifications. The manufacturer states that versions compliant with MIL-STD-883 are available and directs users to the current AD678/883B data for detailed specifications. This page consolidates manufacturer information, distributor listings, family upgrade guidance, verified drop-in candidates, and practical selection guidance. It distinguishes documented facts from values that require confirmation from the current Analog Devices data sheet, supporting faster sourcing and more reliable engineering evaluation.

RFQ پەیوەندی
AD678JN - 12-Bit 200 kSPS Complete Sampling ADC | Analog Devices
AD678JN

AD678JN - 12-Bit 200 kSPS Complete Sampling ADC | Analog Devices

The Analog Devices AD678JN is a 12-bit, 200 kSPS complete sampling analog-to-digital converter housed in a 28-pin PDIP package. The monolithic converter integrates a sample-and-hold amplifier, microprocessor-compatible parallel bus interface, voltage reference, and clock-generation circuitry. Its single analog input is converted by a flash-style ADC architecture into a 12-bit digital result for signal-processing, instrumentation, and embedded measurement systems. An ADC is an interface IC that converts a continuously varying analog voltage into a numeric representation. Within the broader signal-chain hierarchy, the AD678JN belongs to the ADC/DAC class of data-conversion semiconductors, where it sits between sensors or front-end amplifiers and a microprocessor, DSP, or controller. The complete sampling ADC designation means that the major supporting functions are integrated rather than implemented as separate external components. The AD678's key characteristics include 12-bit resolution, a 200 kSPS sampling rate, a microprocessor-compatible interface, an internal voltage reference, and integrated clock circuitry. Dynamic performance parameters such as signal-to-noise plus distortion ratio, total harmonic distortion, and intermodulation distortion are important when the converter handles dynamic or AC signals. The manufacturer states that the AD678 shares the same pinout as the 14-bit, 128 kSPS AD679 ADC, providing a useful migration path when higher resolution is required without changing the board layout. The device is suitable for industrial data acquisition, process monitoring, waveform measurement, communications equipment, and control systems. Its parallel word-oriented output can connect directly to suitable microprocessor or digital signal processor buses, while the integrated sample-and-hold stage simplifies front-end signal acquisition. System designers should still budget acquisition time, input bandwidth, reference accuracy, digital-interface timing, and analog settling time around the sampling instant. A critical layout consideration is keeping the analog input path short and quiet. The input, reference, and digital return connections should follow the pin-description and layout guidance in the manufacturer datasheet, with care taken to minimize coupling from the parallel data bus into the sensitive input node. The AD678 is a legacy through-hole device, so its DIP footprint also makes it practical for prototyping, maintenance, and repair systems where surface-mount assembly is not required. This page combines the manufacturer product information, exact AD678JN listing data, package details, application guidance, and documented upgrade paths. It also distinguishes verified drop-in candidates from parts that require package or functional review, helping engineers evaluate the AD678JN for new designs and legacy replacements.

RFQ پەیوەندی
AD678KD - 12-Bit 200 kSPS Sampling ADC | Analog Devices
AD678KD

AD678KD - 12-Bit 200 kSPS Sampling ADC | Analog Devices

The Analog Devices AD678KD is a monolithic, complete sampling analog-to-digital converter with 12-bit resolution, a 200 kSPS sampling rate, and a 28-pin ceramic DIP package. It combines a sample-and-hold amplifier, microprocessor-compatible parallel bus, voltage reference, and clock-generation circuitry in one device. The verified distributor data identifies AD678KD as a single-input, flash-conversion ADC with a parallel output interface. What is a complete sampling ADC? A sampling ADC captures an analog voltage with an internal sample-and-hold amplifier and converts that sample into a digital code. The AD678 belongs to the ADC hierarchy and integrates the sampling, conversion, reference, clock, and digital-interface functions needed for direct signal acquisition. This integration reduces the number of external components and makes the converter suitable for instrumentation, industrial control, communications, and measurement systems. Key verified characteristics include 12-bit resolution, 200 kSPS operation, one analog input, flash architecture, parallel output, and a 28-pin CDIP/SBCDIP package. The AD678 is specified for dynamic parameters including signal-to-noise-plus-distortion ratio, total harmonic distortion, and intermodulation distortion. Those parameters are particularly relevant when the converter handles waveform acquisition or other signal-processing applications. The device also includes a voltage reference and clock-generation circuitry, allowing it to operate as a more complete acquisition element than a bare flash-converter core. The Analog Devices product page states that the AD678 provides the same pinout as the 14-bit, 128 kSPS AD679 ADC, creating a documented upgrade path when a design requires related interface geometry and higher resolution at a lower sampling rate. Typical uses include dynamic signal measurement, process monitoring, communications equipment, laboratory instrumentation, and industrial data-acquisition systems. The 200 kSPS rate is suitable for many high-speed measurement tasks, while the 12-bit code width establishes the digital resolution available to downstream processors. A key design consideration is the distinction between a verified product-family relationship and a true drop-in replacement. The AD679 shares the AD678 pinout according to Analog Devices, but its resolution and sampling rate differ. Engineers should also review the full manufacturer datasheet, electrical limits, timing, reference requirements, and package details before finalizing a replacement or upgrade. This page synthesizes the verified manufacturer and distributor information, documented upgrade-path data, practical design guidance, and cautious replacement analysis rather than treating every related converter as a drop-in substitute.

RFQ پەیوەندی
AD679AD - 14-Bit 128 kSPS Complete Sampling ADC | Analog Devices
AD679AD

AD679AD - 14-Bit 128 kSPS Complete Sampling ADC | Analog Devices

Analog Devices AD679AD is a 14-bit, 128 kSPS complete sampling analog-to-digital converter housed in a 28-pin SBCDIP package. The device combines a 14-bit conversion resolution with a 128 kSPS sampling rate for mixed-signal instrumentation, industrial measurement, communications, and data-acquisition systems. Its parallel-output architecture provides digitized samples to external digital processing circuitry. A complete sampling ADC is an integrated data-conversion device designed to acquire an analog input and present its digital result through a defined digital interface. Within the semiconductor hierarchy, the AD679AD belongs to the ADC/DAC class of integrated circuits, combining analog input conditioning and digital conversion functions in one device. The 28-pin SBCDIP package also provides a mechanically robust through-hole format for industrial and legacy system assemblies. The primary specifications establish a clear performance baseline. AD679AD provides 14-bit resolution, operates at 128 kSPS, and uses 28-pin SBCDIP packaging. Analog Devices identifies the AD679 as a complete sampling ADC and documents it as an upgrade-path device with the same pinout as the 12-bit, 200 kSPS AD678. This relationship supports board-oriented migration planning, although resolution and sampling rate must be reviewed together. The product page emphasizes long-term reliability relative to multichip and hybrid implementations. Combining the conversion functions into one integrated circuit reduces the number of separate assemblies that must be sourced, interconnected, and qualified. For systems requiring military-product screening, the AD679 family is available in versions compliant with MILSTD-883; the detailed ordering and test information should be confirmed in the applicable Analog Devices military data sheet. Typical uses include precision signal acquisition, process-control measurement, communications equipment, factory data logging, and laboratory instrumentation. The 128 kSPS rate is suitable for continuous monitoring of many analog signals, while 14-bit resolution supports applications that need more detail than a lower-resolution converter. The parallel digital output allows the converter to connect directly to suitable counters, logic, DSP, or microcontroller input structures. PCB design should follow the Analog Devices AD679 datasheet for decoupling, reference-voltage connections, analog input routing, digital timing, and ground partitioning. Keep high-speed digital traces physically separated from the analog input and reference networks, and place input and reference capacitors close to their associated pins. Because the AD679AD is a 28-pin SBCDIP device, verify the installed socket, pin orientation, and thermal environment before replacement. This product page combines the verified AD679AD identity and ordering details with the manufacturer's upgrade-path information, package characteristics, and practical migration guidance. It also provides a parameter-by-parameter comparison with available same-family options and identifies the checks engineers should complete before substituting a converter in an existing acquisition circuit.

RFQ پەیوەندی
AD679AJ - 14-Bit 128 kSPS Complete Sampling ADC | Analog Devices
AD679AJ

AD679AJ - 14-Bit 128 kSPS Complete Sampling ADC | Analog Devices

The Analog Devices AD679AJ is a 14-bit, 128 kSPS complete sampling analog-to-digital converter housed in a 44-JLCC ceramic package measuring approximately 16.39 x 16.39 mm. It integrates a sample-and-hold amplifier, microprocessor-compatible parallel bus interface, voltage reference, and clock-generation circuitry, providing a complete signal-conversion solution in one device. The AD679AJ is specified for dynamic performance including signal-to-noise-plus-distortion ratio, total harmonic distortion, and intermodulation distortion. A complete sampling ADC is a data-conversion IC that acquires an analog input, holds it at a stable level during conversion, and produces a corresponding digital code. Within the broader hierarchy of semiconductor components, the AD679AJ is an ADC, a data-converter IC, and a signal-processing component. Its integrated reference, clock circuitry, and sample-and-hold amplifier reduce the number of external support components required in traditional instrumentation and signal-processing designs. The principal verified specifications are 14-bit resolution, a maximum conversion rate of 128 kSPS, single-ended analog input operation, and flash-converter architecture. The manufacturer also states that the AD679 is specified for signal processing applications where dynamic AC parameters are important. These characteristics make the device suitable for industrial measurement, communications, instrumentation, and other systems requiring accurate periodic conversion of a single analog input. The AD679 architecture combines the sampling function and conversion function on a monolithic chip. Its microprocessor-compatible bus supports digital integration with processors, while the internal voltage reference and clock-generation circuitry provide a more complete converter subsystem than a bare flash ADC. The manufacturer further identifies the AD679 as having the same pinout as the 12-bit, 200 kSPS AD678 ADC, creating a useful migration path when higher resolution is required. Typical applications include sampled measurement of analog sensors, waveform acquisition, communications signal processing, precision instrumentation, and embedded control systems. In each case, the 128 kSPS rate determines how rapidly the input can be sampled, while 14-bit resolution determines the number of discrete quantization levels represented by each conversion result. The internal sample-and-hold amplifier is particularly useful when the source impedance and acquisition timing require the input to remain stable during conversion. A critical design consideration is the relationship between input range, reference accuracy, acquisition time, and source impedance. The application circuit must present the analog input within the converter's specified range and provide sufficient settling time before each conversion. Designers should also preserve clean supply and ground connections because dynamic ADC performance depends on the complete signal chain, not only on nominal resolution and conversion-rate specifications. This product record combines the verified 14-bit, 128 kSPS ADC positioning with practical guidance on selection, application fit, comparison, and drop-in availability. It also identifies the documented AD679 upgrade relationship to the AD678 and clearly separates verified manufacturer data from parameters that require confirmation from the complete datasheet.

RFQ پەیوەندی
AD679BD - 14-Bit 128 kSPS Sampling ADC | Analog Devices
AD679BD

AD679BD - 14-Bit 128 kSPS Sampling ADC | Analog Devices

The Analog Devices AD679BD is a 14-bit, 128 kSPS complete sampling analog-to-digital converter with one input and a 28-CDIP package. It provides the core conversion characteristics shown in the AD679 family documentation: 14-bit resolution, 128 kSPS throughput, a single input, and flash-converter architecture. The AD679BD is identified by DigiKey as a one-input, one-flash, 28-CDIP device, while the manufacturer describes the AD679 as a complete sampling ADC. An ADC is a data-acquisition IC that converts an analog voltage into a numeric value for processing, measurement, or transmission. Within the signal-chain hierarchy, an ADC is an interface IC and data-conversion component. The AD679 belongs to the flash-architecture family of ADCs, which use parallel internal conversion stages and are suited to moderate-speed measurement systems requiring parallel digital output. The AD679 family's headline specifications are 14-bit resolution, 128 kSPS conversion throughput, single-channel input, and a 28-CDIP package. The AD679 also provides an upgrade path from the 12-bit, 200 kSPS AD678 while retaining the same pinout, as stated on the Analog Devices product page. That makes the AD679 suitable for systems that require greater resolution than the AD678 while retaining a familiar board interface. Analog Devices states that the AD679 offers long-term reliability compared with multichip and hybrid designs. This is significant for industrial, instrumentation, and defense-related equipment where maintaining a consistent converter configuration can simplify board qualification, spare-part planning, and long-lived product support. The manufacturer also notes that MIL-STD-883-compliant versions are available through the Analog Devices military product documentation. Typical uses include process-control measurements, sensor signal acquisition, laboratory instrumentation, industrial data acquisition, and embedded control systems. In each case, the 14-bit resolution provides 16,384 digital code levels for the represented analog input range, while the 128 kSPS rate supports regularly sampled measurements. The exact input range, reference voltage, timing, output logic, and environmental limits must be confirmed in the manufacturer datasheet before a new design is released. The primary design consideration is package and interface continuity. Because the AD679 is specified in a 28-CDIP package and uses a parallel conversion architecture, PCB layout, connector routing, and downstream digital logic must be checked against the complete AD679 pinout. Input conditioning, reference-source stability, analog grounding, and acquisition timing are equally important for achieving useful conversion performance. This product record combines the verified 14-bit, 128 kSPS, single-input, flash-architecture, and 28-CDIP characteristics with distributor availability information, an official datasheet link, engineering application guidance, and explicit data-gap markers. It is intended to help engineers identify the correct ADC and verify package, timing, and electrical details without relying on unsupported substitute claims.

RFQ پەیوەندی
AD679BJ - 14-Bit 128 kSPS Sampling ADC | Analog Devices
AD679BJ

AD679BJ - 14-Bit 128 kSPS Sampling ADC | Analog Devices

The Analog Devices AD679BJ is a 14-bit, 128 kSPS complete sampling analog-to-digital converter that integrates a high-speed sample-and-hold amplifier, ADC core, 5 V reference, clock generator, and digital interface on a single monolithic chip, supplied in a 44-JLCC (J-leaded ceramic chip carrier, 16.39 x 16.39 mm) package with commercial-grade temperature range. The "J" suffix denotes the side-brazed ceramic 44-JLCC package, while "B" indicates the commercial temperature grade (0 C to +70 C), as confirmed by the Analog Devices AD679 datasheet and DigiKey catalog data. A sampling ADC (also called a data-acquisition ADC or complete-sampling ADC) is a converter that pairs an internal track-and-hold front-end with a quantization core so that the converter can directly digitize fast-changing, wideband input signals without an external SHA. Within the broader semiconductor taxonomy, an ADC falls under data-converter ICs -> mixed-signal ICs -> power-management and signal-chain semiconductors, and the AD679 belongs specifically to the successive-approximation family of medium-speed, high-resolution converters that target instrumentation and signal-processing systems. Key differentiating features of the AD679BJ include its 14-bit resolution with no missing codes, 128 kSPS throughput, internal 5 V buried-zener reference (laser-trimmed for low drift), a self-contained clock, and digital I/O port that allows direct connection to 8-/16-bit microprocessors. The complete integration eliminates the usual SHA and reference support circuitry, reducing board area and design time. The AD679 also shares the same pinout as the 12-bit, 200 kSPS AD678, providing a clear upgrade path. Architecturally, the AD679 uses a multipass successive-approximation register (SAR) conversion technique with a flash sub-ADC, yielding wide dynamic range and low integral nonlinearity. The internal reference is calibrated at the factory, and the analog input stage accepts both unipolar and bipolar input ranges, simplifying front-end signal-conditioning design. Typical applications include medical imaging front-ends, precision industrial data acquisition, multichannel data-acquisition boards, instrumentation front-ends, and radar/digital-beam-forming subsystems. The wide temperature range and MIL-STD-883 screening (available on the /883B suffix variant) also make it attractive in defense and aerospace designs. When designing with this device, allocate adequate decoupling on the analog supply pins and route the analog/digital grounds in a star configuration to avoid corruption of the LSBs at 14-bit resolution; the signal chain below 1 LSB (~305 uV for a 5 V full scale) is highly noise-sensitive. Designers should also note that the AD679 is mature (NRND or close to last-time-buy at Analog Devices), so long-life programs must validate supply continuity up front. This page synthesizes distributor pricing, drop-in alternatives from the AD678/AD774/AD1671 families, and practical design notes not found in the bare datasheet PDF.

RFQ پەیوەندی