بەرهەمەکان (190+)

BD34701KS2 - 7.1ch Sound Processor with Micro-Step | ROHM
BD34701KS2

BD34701KS2 - 7.1ch Sound Processor with Micro-Step | ROHM

The ROHM BD34701KS2 is a 7.1-channel surround-sound processor with eight independent volume channels, built-in micro-step volume control, and an operating supply range of 6.5 V to 7.5 V. The device is packaged in a 52-pin SQFP-T (10 mm × 10 mm) surface-mount package and supports I2C-oriented control for audio-system integration. An audio processor is a specialized interface IC that receives multiple audio signals and applies channel routing, attenuation, and volume-control functions before the signals reach amplifiers, speakers, or downstream codecs. The BD34701KS2 belongs to the broader audio signal-processing hierarchy that includes audio processors, audio codecs, mixers, and surround-sound processors. The BD34701KS2 provides an eight-channel independent volume system that can be configured for 7.1-channel surround operation. Its micro-step volume function is intended to reduce switching shock noise during volume changes, supporting cleaner transitions in consumer audio equipment. The device also includes an eight-channel input-selector architecture, dual input selection for zone 2, and multi-channel input capability. Eight independently adjustable channels make the processor useful when several audio paths must receive different attenuation levels. Instead of relying on a separate volume-control stage for every output, a system can centralize channel selection and level control within the processor and control the configuration through its serial interface. The 52-pin package integrates the associated control and signal connections into a compact square surface-mount footprint. Typical applications include 7.1-channel home-theater systems, multi-zone receivers, active speakers, automotive audio head units, and other multichannel amplification systems. The operating range of 6.5 V to 7.5 V suits equipment using a regulated 7 V-class audio rail, while independent channel attenuation simplifies calibration across loudspeaker positions. When laying out a board, use the manufacturer's pin description table to assign every pin and preserve the exposed-package land pattern and thermal requirements. Confirm the external component values, interface addresses, and supported channel configuration from the manufacturer datasheet before production release. A separate regulator and decoupling network should provide a quiet 7 V-class rail at the device supply pins. This page summarizes the processor architecture, package characteristics, practical integration considerations, and verified sourcing paths. It also distinguishes the documented BD34701KS2 from unverified replacement parts so design engineers can avoid assuming that a similar audio processor is electrically and mechanically interchangeable.

RFQ پەیوەندی
BD34704KS2 - 8-Channel 7.1ch Audio Processor | ROHM Semiconductor
BD34704KS2

BD34704KS2 - 8-Channel 7.1ch Audio Processor | ROHM Semiconductor

ROHM Semiconductor BD34704KS2 is an 8-channel analog audio sound processor optimized for 7.1-channel surround systems, operating from a 6.5V to 7.5V supply in an 80-pin SQFP-T80C package. It combines eight independent volume channels, multi-zone audio routing, and micro-step volume attenuation in one signal-processing IC. An audio sound processor is a specialized interface IC that controls signal level, channel distribution, and zone routing between audio sources and amplifier stages. In a home-theater hierarchy, the BD34704KS2 sits between source-selection circuitry and powered speakers or amplifiers. It is designed to support surround-sound channel management while reducing audible transitions during attenuation. The principal features include independent volume control for eight channels, support for 7.1-channel systems, and micro-step volume operation. According to the manufacturer, improved operational-amplifier specifications and optimized element layout support high-quality audio reproduction. Micro-step attenuation is especially useful when reducing channel level, because the finer adjustment steps can reduce switching pop noise compared with abrupt volume transitions. The device also supports multi-zone input selection, allowing one sound processor to serve multiple listening areas or route different source channels to different output groups. This integration can simplify the analog control section of an AV receiver, home-theater controller, or multi-zone audio amplifier while reducing the number of discrete attenuators and routing components required. Typical uses include 7.1-channel home-theater systems, AV receivers, surround-sound amplifiers, multi-zone audio equipment, and other analog audio products requiring eight independently controlled channels. The 6.5V to 7.5V operating range places it in a conventional analog power rail, allowing system-level design around a nominal 7V supply. Layout quality is critical because the manufacturer's product information specifically identifies optimized element layout as part of the device's sound-quality strategy. Place input and output paths away from switching supplies and high-current return paths, maintain symmetrical grounding where practical, and decouple the analog supply close to the device. This product page combines the known 8-channel architecture, 7.1-channel use case, micro-step volume behavior, supply range, and package information with practical guidance for AV receiver, amplifier, and multi-zone audio designs.

RFQ پەیوەندی
BD37514FS-E2 4-Channel I2C Audio Processor | ROHM
BD37514FS-E2

BD37514FS-E2 4-Channel I2C Audio Processor | ROHM

ROHM Semiconductor BD37514FS-E2 is a four-channel audio tone processor with a built-in two-band equalizer, 7 V to 9.5 V analog supply range, I2C control, and a 20-pin SSOP-A package. It supports operating frequencies up to 0.4 MHz and is designed to reduce switching noise during input gain, mute, main volume, fader volume, bass, treble, and loudness adjustments. An audio tone processor is a type of analog signal-conditioning IC. Within the broader hierarchy of integrated circuits, it belongs to the audio processor and interface IC category, where it sits between source-selection circuitry and downstream amplifiers or loudspeakers. Its primary role is to combine input routing, level control, tone adjustment, and mute functions while limiting audible clicks and pops caused by abrupt switched-capacitor transitions. Key features include one differential input selector, three single-ended input selectors, and built-in ground-isolation amplifier inputs for external stereo signals. The advanced switch circuit applies controlled transitions to volume and tone functions, reducing switching noise at every adjustment step. The two-band equalizer provides bass and treble adjustment, while the integrated input-gain and mute controls support compact portable-audio signal chains. The BD37514FS-E2 uses a 7 V to 9.5 V supply architecture typical of analog audio equipment. Its 0.4 MHz operating capability is suitable for processing audio signals within the human-audible range, while the I2C interface allows a host controller to adjust tone, volume, fader, mute, and input-selection settings. The 20-pin SSOP-A package provides a surface-mount footprint for consumer audio boards. Typical uses include portable-stereo systems, compact radios, mini-audio systems, car-audio interface boards, and consumer electronics with several external audio inputs. The ground-isolation inputs are useful when the source and processor do not share an ideal common ground, while the selector architecture supports switching among stereo and single-ended sources. Designers should follow the manufacturer pin-description and typical-application circuits when assigning control pins and external components. Power and signal-ground paths should be kept compact, and I2C pull-up placement must be checked against the bus topology. Because ROHM marks the family as not recommended for new designs, it is best suited to maintaining established equipment rather than starting an unrelated new platform. This page consolidates the manufacturer feature set, package and interface details, sourcing guidance, application fit, and design cautions into an engineering-focused reference. It also distinguishes confirmed drop-in replacements from devices that merely perform a similar audio-processing function.

RFQ پەیوەندی
BD37522FS-E2 - 2-Band I2C Audio Processor | ROHM
BD37522FS-E2

BD37522FS-E2 - 2-Band I2C Audio Processor | ROHM

ROHM BD37522FS-E2 is an analog sound processor with a built-in 2-band equalizer, a 7 V to 9.5 V supply range, I2C control, three audio input selectors, and independent volume and fader control for four channels. The device is offered in a 24-pin SSOP-A package for car-audio and related multi-source audio systems. An audio sound processor is an analog signal-conditioning IC placed between audio sources and an amplifier or speaker system. It manages source selection, gain, volume, fader level, tone, and loudness functions. Within the broader semiconductor hierarchy, the BD37522FS-E2 belongs to the audio processor category and ultimately to integrated audio signal-processing circuitry for automotive infotainment and compact consumer audio equipment. The integrated 2-band equalizer adjusts bass and treble without external equalization components. Three input selectors allow multiple source signals to be routed through one processing chain. Four-channel independent volume and fader control supports balanced multi-zone audio distribution, while main volume, input-gain, and loudness functions provide additional system-level control. The I2C interface enables a host controller to configure the sound processor instead of relying entirely on mechanical controls. The target part operates from 7 V to 9.5 V, making it suitable for systems using an automotive-like low-voltage supply rail. Its analog audio processing architecture consolidates functions that would otherwise require multiple external ICs or discrete networks. Integration reduces the number of signal-path components, but it does not increase the output power available to speakers; a suitable audio amplifier remains required after the signal-processing stage. Typical uses include car-audio head units, multi-zone vehicle cabin audio, radio navigation systems, portable audio products, and other installations that need independent level control for several listening areas. The internal equalizer is particularly useful where board space is constrained or tonal adjustment must be available through a digital control system. For layout, place the device close to the audio input and output routing components, and follow the manufacturer pin-description table when assigning tracks. Keep analog signal paths away from switching nodes and high-current return paths. Confirm decoupling requirements, supported control addresses, and the applicable interface timing in the manufacturer datasheet before finalizing the PCB. This product summary consolidates the manufacturer product information, functional architecture, sourcing guidance, and practical integration considerations for engineers evaluating the BD37522FS-E2 in analog multi-source audio systems.

RFQ پەیوەندی
BD37534FV-E2 3-Band Audio Equalizer | ROHM Semiconductor
BD37534FV-E2

BD37534FV-E2 3-Band Audio Equalizer | ROHM Semiconductor

The ROHM Semiconductor BD37534FV-E2 is a two-channel sound processor with a built-in three-band equalizer, supplied in a 28-SSOP-B surface-mount package. It is designed for car-audio signal processing and operates from a 7 V to 9.5 V supply. The device provides input selection, input-gain control, main volume, loudness, a five-channel fader volume function, a low-pass filter for subwoofer processing, and mixing input support. A sound processor is an audio signal-conditioning integrated circuit that adjusts amplitude and frequency-domain characteristics between audio sources and an amplifier or speaker system. The BD37534FV family belongs to the broader analog audio-processing category, combining source switching, volume management, tone shaping, loudness compensation, and subwoofer filtering in one integrated circuit. Its integrated three-band equalizer allows bass, middle, and treble adjustment without external equalizer components, helping reduce board size in compact audio systems. The equalizer divides the audio signal into bass, middle, and treble regions for tone adjustment. The manufacturer identifies the BD37534FV family as supporting common control software, which can simplify system integration when the same software ecosystem is used across related products. The built-in subwoofer path includes low-pass filtering and mixing functionality, making the device relevant to automotive head units, in-dash audio systems, compact stereo systems, and other multi-zone audio products. The BD37534FV-E2 uses an I2C control interface and is identified as an automotive-grade, two-channel audio tone processor. Its operating-temperature range is -40°C to 85°C, while its supply-voltage range is 7 V to 9.5 V. The 28-SSOP-B package is a surface-mount format measuring 0.220 inches, or 5.60 mm, in width according to the distributor specification record. The part is presented by the manufacturer as a car-audio sound processor rather than as a power amplifier, so its signal-processing function should not be confused with output-stage power capability. When designing around this device, the power supply, I2C control lines, analog input routing, and output connections should be planned together. Decoupling should follow the connection recommendations in the manufacturer datasheet, and the analog signal path should be kept away from noisy switching or high-current power circuitry. The equalizer and volume functions are especially useful where a compact panel requires integrated bass, middle, treble, loudness, and subwoofer control without a separate network of external active filters. This page combines the manufacturer product description, distributor specifications, package information, operating limits, and application-oriented guidance. It also identifies the verified drop-in alternative that can be evaluated without changing the PCB footprint and highlights which detailed electrical and pin-level characteristics still require confirmation from the manufacturer datasheet before a production release.

RFQ پەیوەندی
BD37541FS-E2 - 3-Band Audio Processor | ROHM Semiconductor
BD37541FS-E2

BD37541FS-E2 - 3-Band Audio Processor | ROHM Semiconductor

ROHM Semiconductor BD37541FS-E2 is an analog car-audio sound processor with a built-in three-band equalizer, five-channel mixing capability, I2C control, and a 32-SSOP-A package. Its supported supply range is 7 V to 9.5 V, making it suited to conventional automotive audio systems operating from a 12 V battery through an appropriate regulator. A sound processor is an analog audio integrated circuit that accepts multiple audio inputs and provides input selection, gain control, volume control, tone shaping, mixing, and fader functions before the signal reaches an audio power amplifier. Within the broader electronics hierarchy, the BD37541FS-E2 belongs to the sound-processor family, then to analog audio-processing ICs, audio signal-chain ICs, and ultimately semiconductor devices. The principal system feature is the integrated three-band equalizer. ROHM describes parametric equalization that can be adjusted without external equalization components. Separate bass, midrange, and treble controls give a vehicle audio designer a practical way to shape the tonal balance of radio, CD, auxiliary, or other line-level sources. The built-in subwoofer output also reduces the external circuitry needed to develop a compact multi-channel car-audio system. Beyond equalization, the device includes a stereo input selector with single-ended and ground-isolated input capability, input-gain control, main volume, loudness, five-channel fader volume, and mixing input. The BD37541FS-E2 uses I2C control, which allows a host controller to adjust the selected audio-processing functions and reduces the number of external mechanical controls required in a finished audio system. Typical applications include factory-fit car head units, automotive infotainment systems, compact multimedia systems, auxiliary-input modules, and powered speaker systems requiring centralized source selection and tone shaping. Because this device performs analog volume, gain, and equalization functions rather than generating high-power speaker drive, it should be paired with one or more external audio power amplifiers sized for the speaker impedance and required output power. When designing a circuit around the BD37541FS-E2, preserve adequate analog grounding, route audio traces away from switching nodes and high-current power paths, and decouple the supply close to the device. Confirm the pin assignments and application circuit in the manufacturer datasheet before assigning traces because the public product result does not expose a complete verified pin description table. This page combines the exact manufacturer and distributor facts for BD37541FS-E2 with practical guidance on equalization, signal-chain placement, I2C control, PCB layout, and drop-in replacement qualification. It also distinguishes documented functions from parameters that require confirmation from the manufacturer datasheet before a new design is released.

RFQ پەیوەندی
BD37542FS-E2 - 3-Band Audio Tone Processor | ROHM
BD37542FS-E2

BD37542FS-E2 - 3-Band Audio Tone Processor | ROHM

The ROHM Semiconductor BD37542FS-E2 is a three-channel audio tone processor with a built-in three-band equalizer, I2C control, and support for bass, midrange, and treble adjustment. Designed for compact audio systems, it operates from a 7 V to 9.5 V supply and is offered in a 32-pin SSOP-A package. Its equalization functions do not require external equalizer components. An audio tone processor is a functional block within the broader audio-signal-chain hierarchy. It receives one or more analog audio channels, applies adjustable frequency-dependent gain, and provides shaped outputs for loudspeakers, amplifiers, or downstream audio devices. In the ROHM BD37542FS series, the integrated bass, mid, and treble equalizer supports repeatable tone adjustment with fewer external components and less circuit-board area than a conventional passive or active equalizer. The principal features include a built-in three-band equalizer, three-channel processing, I2C bus control, parametric tone adjustment without external components, and a dedicated subwoofer output function. The common control software identified by ROHM supports the BD37542FS family and is intended to improve development efficiency across related audio-system designs. The three-channel structure permits independent processing of multiple audio paths when the associated circuit configuration is designed for that use. The BD37542FS-E2 belongs to the SSOP-A surface-mount package family, which supports compact consumer-audio hardware. Its 32-pin interface provides the connections required for power, analog signal paths, equalizer functions, and digital control. Because the exact pin assignments are not stated on the product-page listing, board designers should use the pin-description table in the manufacturer datasheet when assigning tracks, especially for I2C communication and the subwoofer output. Typical applications include compact stereo and multimedia audio products, amplified speakers, karaoke equipment, home-audio systems, and sound-processing modules where user-adjustable bass, midrange, and treble are valuable. The integrated equalizer can shorten analog filter design time, while the subwoofer output supports space-saving system architectures without adding a separate equalizer stage. When laying out a design, treat the I2C interface and analog audio paths as separate functional areas to minimize digital coupling into sensitive signals. Confirm the supported supply range, external component requirements, control-register implementation, and output-loading conditions in the manufacturer datasheet before releasing production hardware. This page organizes the verified product identity, package information, functional features, application guidance, design cautions, and sourcing questions for BD37542FS-E2. It also distinguishes documented capabilities from details that require direct verification against the ROHM datasheet, helping engineers plan sourcing, schematic design, and PCB implementation more efficiently.

RFQ پەیوەندی
BD3808FS-E2 Audio Processor IC | ROHM Semiconductor
BD3808FS-E2

BD3808FS-E2 Audio Processor IC | ROHM Semiconductor

ROHM Semiconductor BD3808FS-E2 is an audio-special-purpose integrated circuit classified by DigiKey as an Audio Channel device and by other distributor listings as an audio processor. The supplied product information identifies a 22SOP package and associates the device with medium-power linear and switching applications. These verified facts place the BD3808FS-E2 in the broader category of audio processing ICs, where dedicated circuitry manages audio signal paths or associated control functions within consumer and industrial audio equipment. An audio processor is a specialized application-specific semiconductor. Unlike a general-purpose logic IC, it is designed around audio-channel requirements, including signal handling, channel control, or functions used to implement an audio system. The BD3808FS-E2 belongs to this audio-special-purpose IC hierarchy, which sits within integrated circuits and ultimately within the semiconductor component category. Its 22SOP package provides the physical interface used to connect the device on a printed circuit board. The verified distributor records distinguish the exact BD3808FS-E2 ordering code from the broader BD3808FS family listing. DigiKey identifies BD3808FS-E2 as an Audio Channel part, while marketplace records describe it as an IC audio processor in a 22SOP package. A distributor description also associates it with medium-power linear and switching applications. These classifications suggest that engineers should review the manufacturer datasheet for the exact channel architecture, electrical limits, external component requirements, and supported signal topology before releasing a production design. From a sourcing perspective, the BD3808FS-E2 is listed across DigiKey, Octopart, and multiple distributor or catalog channels. The verified search results report availability or comparison coverage, but they do not provide numeric pricing, stock quantities, operating-temperature limits, supply-voltage limits, output-current ratings, gain, distortion, frequency response, pin assignments, or package dimensions. Consequently, those electrical and mechanical parameters cannot be safely inferred from distributor category labels and must be confirmed in the manufacturer documentation. Typical design investigation for this device would focus on medium-power audio systems, signal routing, channel management, and mixed linear or switching signal-chain implementations. Whether it is suitable for a particular headphone, speaker, receiver, or auxiliary audio board depends on its documented supply range, channel count, control interface, and electrical performance. Engineers should also verify footprint compatibility, exposed or non-exposed pad details, pin multiplexing, and recommended application circuitry rather than relying only on the 22SOP package name. The main purchasing risk is incomplete verification: the supplied data does not establish lifecycle status, automotive qualification, RoHS or REACH declarations, exact package drawing, or a manufacturer-hosted datasheet URL. Samples and lot traceability should therefore be obtained before substitution. This page distinguishes verified distributor facts from unknown technical fields and avoids presenting estimated electrical ratings as if they were manufacturer specifications. This page adds engineering-focused value by mapping the verified 22SOP package and audio-processor classification to likely design checks, documenting all available source links, and identifying the exact data still required for footprint validation, schematic review, sourcing, and production release. It also explains why an apparently similar BD3808FS order code should not be assumed to be a drop-in alternative without package and pin-level verification.

RFQ پەیوەندی
BD3809FS - Audio Channel Processor | ROHM Semiconductor
BD3809FS

BD3809FS - Audio Channel Processor | ROHM Semiconductor

ROHM Semiconductor BD3809FS is an audio-channel integrated circuit identified by distributor records as an audio processor in a 22SOP package. The available catalog information describes the device for medium-power linear and switching applications, while the primary distributor listing classifies it under Audio Special Purpose and Audio Channel. These verified identifiers establish the component family and form factor, but the supplied source excerpts do not include a complete manufacturer datasheet parameter table. An audio-channel processor is an application-specific integrated circuit used to process, control, or route audio signals within an audio subsystem. It belongs to the broader hierarchy of audio ICs, analog and mixed-signal semiconductors, and signal-processing integrated circuits. Compared with a general-purpose operational amplifier, an application-specific audio processor may incorporate multiple functions, but the exact internal blocks and signal paths of BD3809FS cannot be confirmed from the supplied excerpts. The verified package identifier is 22SOP. That package provides 22 physical lead positions, but the supplied data does not include a pinout, pin names, exposed-pad information, dimensions, or pin-to-pin replacement cross-reference. The catalogs also identify BD3809FS-E2 as an ordering designation associated with the same device family. Its electrical details, marking code, temperature range, and ordering-code differences require confirmation from the manufacturer datasheet. BD3809FS is associated with audio-channel applications and medium-power linear and switching application descriptions. These descriptions make it relevant to audio equipment, signal-conditioning circuits, and communication equipment where an audio-channel IC is required. However, verified operating voltage, input and output signal range, channel bandwidth, gain, distortion, channel count, control interface, and output-drive specifications are not included in the supplied source data and should not be inferred from the product type alone. Because the available evidence is distributor-oriented rather than a complete technical datasheet, engineers should verify pin functions, supply requirements, timing, absolute maximum ratings, decoupling recommendations, and application circuitry before committing to a design. A replacement should be selected only after confirming the exact 22SOP footprint, pin assignment, control protocol, electrical limits, and signal performance. This page consolidates the verified BD3809FS identity, package, category, distributor availability references, replacement-search evidence, and engineering-selection cautions. It separates confirmed catalog facts from unavailable technical parameters and provides a practical verification path for schematic capture, PCB layout, sourcing, and component-risk review.

RFQ پەیوەندی
BD3811K1 - 6-Channel 5.1ch Sound Processor | ROHM
BD3811K1

BD3811K1 - 6-Channel 5.1ch Sound Processor | ROHM

The ROHM BD3811K1 is a 6-channel 5.1ch sound processor with integrated mode selection, input selection, 6-channel volume control, gain amplification, bass, treble, and bass boost functions. The device is supplied in an 80-QFP package measuring 20 mm by 14 mm and is designed for home-theater and multichannel audio systems. A sound processor is a dedicated audio-system IC that controls routing, level, tone, and channel-mixing functions before signals reach power amplifiers and loudspeakers. The BD3811K1 belongs to the broader hierarchy of audio special-purpose ICs, audio signal processors, analog and mixed-signal semiconductors, and integrated circuits. Its 5.1ch orientation means that one front-left, front-right, center, surround-left, surround-right, and subwoofer channel can be managed from a dedicated processor. The verified manufacturer datasheet identifies the BD3811K1 and BD3818KS as 5.1ch sound processors with built-in mode and input selectors. For BD3811K1, the integrated functions include 6-channel volume, gain amplifier, bass, treble, mixing through the family architecture, and bass boost. These functions reduce the number of separate analog controls required in a home-theater receiver or powered-speaker system. The available operating-supply indication is 10 V to 14.6 V, supporting conventional internal analog rails found in multichannel audio equipment. The BD3811K1 is identified by distributors as an audio tone processor in the 80-QFP (20 x 14 mm) package. Its pinout, exact control-voltage ranges, signal-frequency limits, total harmonic distortion, noise specifications, and recommended external-component values are not included in the supplied verified dataset. Those values must be taken directly from the manufacturer datasheet before signal-path or thermal calculations are approved. Typical uses include home-theater preamplifiers, 5.1ch surround-sound receivers, powered multimedia speakers, and analog multichannel source systems. The integrated bass, treble, volume, gain, and bass-boost blocks are particularly useful where a shared system-level tone controller is preferable to discrete analog networks. The input and mode selectors can also simplify source routing, although the exact supported modes and input count require confirmation from the datasheet. When designing around the BD3811K1, treat the audio paths, control inputs, supply rails, and ground returns as an analog system rather than as generic digital logic. Keep input and output routing away from switching supplies and high-current amplifier outputs, provide local supply bypassing according to the manufacturer application circuit, and verify the PCB footprint against the 80-QFP drawing before release. This page consolidates the verified distributor listings, manufacturer-hosted PDF, package information, supply-voltage indication, pricing signal, and practical selection guidance for BD3811K1. It also distinguishes confirmed data from parameters that still require verification from the official datasheet, reducing the risk of designing from an incomplete substitute listing.

RFQ پەیوەندی
BD3812F-E2 - 2-Channel Audio Volume Controller | ROHM
BD3812F-E2

BD3812F-E2 - 2-Channel Audio Volume Controller | ROHM

The ROHM Semiconductor BD3812F-E2 is a 2-channel electronic audio volume controller with 1.2 uVrms residual noise, a 131 dB dynamic range under the IHF-A weighting condition, and independent channel attenuation from 0 dB to -103 dB. The device also provides MUTE operation in 1 dB steps and uses two-line serial control. It is supplied in a 14-pin SOIC package. An electronic volume controller is an audio signal processor that adjusts the level of one or more audio channels through a control interface rather than a mechanical potentiometer. In the product hierarchy, it belongs to the broader class of audio special-purpose ICs, which sit between analog signal-generation blocks and power amplifiers. The BD3812F-E2 is designed to preserve audio signal quality while providing repeatable, software-controlled attenuation for multi-channel audio systems. The BD3812F-E2 supports independent control of two channels over a 103 dB attenuation range. Its mute function changes the level in 1 dB steps, making it suitable for product designs that need fine attenuation control, channel balancing, or user-selected volume settings. When combined with any of the BD3811K1, BD3813KS, BD3814FV, or BD3815KS family members, as specified by ROHM, the common bus supports up to eight channels. The common-bus architecture can also control as many as four chips at the same time. The maximum output voltage is 4.2 Vrms under the stated conditions of VCC = 7 V, VEE = -7 V, and RL = 10 kOhm. This output capability, combined with a residual-noise specification of 1.2 uVrms, supports low-noise audio signal paths. The two-line serial control reduces the number of control connections required compared with a parallel volume-control arrangement, which can also simplify PCB routing and microcontroller interface design. Typical uses include television and monitor audio channels, home-audio systems, active speakers, audio mixers, and multi-zone entertainment equipment. The device is particularly useful where independent left and right attenuation, common-bus expansion, mute control, or precise software-defined volume adjustment is required. Because its operating supply range is specified as 5 V to 7.3 V, the surrounding circuit must provide compatible positive and negative analog rails where the application requires the stated 4.2 Vrms output capability. Designers should preserve the datasheet-specified bypass and output-load conditions when evaluating signal integrity. The 10 kOhm load used for the stated maximum-output condition is relevant to downstream amplifier planning, and any external coupling or amplifier input must not load the output beyond the supported operating conditions. Decoupling should be placed close to the supply pins, and the common-bus wiring of multiple devices should be kept short to minimize coupling between channels. This product data combines the verified ROHM feature description with distributor packaging information, practical multi-channel application guidance, and explicit data-gap markers. It distinguishes verified numeric performance from unreported specifications and does not infer a pin assignment, temperature range, or drop-in substitute that the supplied sources do not confirm.

RFQ پەیوەندی
BD3814FV-E2 - 6-Channel Audio Processor | ROHM
BD3814FV-E2

BD3814FV-E2 - 6-Channel Audio Processor | ROHM

ROHM BD3814FV-E2 is a six-channel electronic-volume audio processor designed for bass and treble tone-control functions in audio systems. It operates from a 10 V to 14.6 V supply range, supports a 2-wire control interface, and is packaged in a 40-terminal SSOP-B. ROHM identifies the BD3814FV family as a Last Time Buy product following a discontinuation announcement, so engineers should include lifecycle risk in new-design decisions. An audio processor is an analog signal-conditioning integrated circuit that controls, attenuates, or shapes audio signals between source and amplifier stages. In the broader product hierarchy, the BD3814FV-E2 belongs to audio processors, analog audio control ICs, and integrated circuits for consumer and professional audio equipment. Its electronic-volume function can provide centralized level and tone adjustment without requiring a separate potentiometer or mechanically operated control for every audio channel. The device is identified as a six-channel electronic-volume processor with bass and treble control. These functions are relevant in multi-zone audio systems where different speaker groups require independent attenuation or tonal compensation. The 40-SSOP-B package provides a relatively high pin count for an analog control IC, supporting multiple signal and control connections while remaining compatible with conventional surface-mount PCB assembly. The BD3814FV-E2 uses a 2-wire interface for tone-control functions. This interface-oriented approach is appropriate for systems where several control parameters are handled through a shared control link rather than a large number of discrete analog inputs. System integrators should confirm the exact control protocol, logic levels, timing, and supported commands against the manufacturer datasheet before finalizing firmware or host-controller communication. Typical applications include multichannel amplifier boards, active speaker crossover networks, car-audio tone controllers, home-theater preamplifiers, compact stereo systems, and commercial audio distribution equipment. In a multi-zone amplifier, the processor can be positioned in the signal path ahead of power amplifiers so bass and treble adjustments are handled consistently across the available channels. Its six-channel architecture is especially useful where several speaker zones need coordinated volume and tone control. Because the BD3814FV-E2 family has entered Last Time Buy status, engineers should review the manufacturer product page for lifecycle notices, ordering information, and any applicable change notifications. A robust design should also reserve the footprint for a qualified alternate only after its pinout, control interface, electrical limits, and acoustic behavior have been compared with the original device. This page combines the confirmed product identity, lifecycle information, package details, application context, engineering guidance, and sourcing considerations for the BD3814FV-E2. It is intended to help designers assess whether the device’s six-channel electronic-volume architecture and 2-wire tone-control interface fit a new or existing audio-control board while accounting for its discontinued-family status.

RFQ پەیوەندی
BD3823FV-E2 5-Channel Audio Processor | ROHM Semiconductor
BD3823FV-E2

BD3823FV-E2 5-Channel Audio Processor | ROHM Semiconductor

The ROHM Semiconductor BD3823FV-E2 is a 5-channel audio signal processor with a 3.2 uVrms low-noise specification, 0.0015% low distortion, and a 20-pin SSOP-B surface-mount package. It operates from 7 V to 14.5 V and supports NTSC and PAL audio systems. The device combines channel selection with a resistor-ladder volume function for multichannel audio recording equipment. An audio signal processor is an interface IC that conditions, selects, and controls multiple audio paths within an entertainment system. Its place in the product hierarchy is audio signal processor, interface IC, audio subsystem, and electronic control component. The BD3823FV-E2 is intended specifically for DVD recorders and related consumer-video equipment where several standard audio channels must be routed while keeping the reproduced signal quiet and acoustically transparent. The primary features include five-channel selection, low output noise of 3.2 uVrms, and low distortion of 0.0015%. Its 7 V to 14.5 V operating range accommodates the supply voltages commonly found in multi-rail consumer-electronics equipment, while its -40°C to +85°C operating-temperature range supports industrial temperature conditions. An I2C interface permits a host controller to configure the processor rather than relying exclusively on mechanical switches. The 20-pin SSOP-B package uses surface-mount technology and provides a compact implementation for audio-processing functions. Because the package has closely spaced leads, assembly processes should be qualified for the specified lead pitch and soldering profile. The device integrates multiple signal-processing functions instead of requiring a separate selector and volume-control arrangement, reducing the number of discrete signal-path components in a DVD recorder. Typical uses include DVD recorder audio routing, NTSC and PAL video-system audio interfaces, multichannel consumer-audio selection, and embedded audio-control subsystems. The processor can serve as the central interface between audio sources, amplifier or codec stages, and the recorder's system controller. Its low-noise and low-distortion characteristics are especially relevant where preserving the original recording signal is more important than simply switching channels. Design the power rails so that the 7 V to 14.5 V operating range is maintained under load, and place the device's decoupling capacitors close to the supply and ground connections. Confirm the board footprint and pin orientation against the ROHM Semiconductor datasheet before layout release. PCB review should also check signal return paths, ground continuity, and keepouts around the SSOP-B leads. This page combines the ROHM Semiconductor device description, package and operating characteristics, sourcing guidance, and practical design considerations into a focused engineering reference. It also distinguishes documented functions from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate the BD3823FV-E2 before committing a board design to this specialized audio interface.

RFQ پەیوەندی
BD3823FV-ME2 - Low-Noise Audio I/O Interface IC | ROHM
BD3823FV-ME2

BD3823FV-ME2 - Low-Noise Audio I/O Interface IC | ROHM

The ROHM BD3823FV-ME2 is a low-noise audio I/O interface integrated circuit designed for NTSC/PAL audio signal processing in recording and DVD-recorder equipment. The device provides a five-channel selector with a resistor-ladder-type volume function, low output noise of 3.2 uVrms, and low distortion of 0.0015%. Its wide power-supply operating range of 7 V to 14.5 V supports systems with input signals up to 4.5 Vrms while maintaining high signal-to-noise performance. An audio I/O interface IC is a functional block within the broader signal-chain hierarchy of audio analog and mixed-signal electronics. It routes and conditions multiple audio channels, provides level control, and helps establish a controlled path between source circuitry and downstream recording or playback stages. In a DVD recorder, such an interface can reduce the number of discrete switching, attenuation, and routing elements required around analog audio paths. The BD3823FV-ME2 combines channel selection with integrated resistor-ladder volume control. Its 3.2 uVrms noise specification is particularly important in low-level audio paths because excess circuit noise can raise the system noise floor and reduce the usable dynamic range of recordings. The 0.0015% distortion specification also indicates that signal-level conditioning can be maintained with low added harmonic error. The 7 V to 14.5 V supply range gives the circuit flexibility across 12 V-class analog equipment while requiring correct bypass and grounding. Its architecture is centered on audio signal selection and attenuation rather than high-speed digital conversion. Consequently, board design should prioritize short analog traces, clean grounding, stable supply bypassing, and control of unwanted coupling from switching regulators and digital circuitry. Typical applications include DVD-recorder analog audio routing, NTSC/PAL recording equipment, multi-channel audio selection, and low-noise analog volume-control stages. The five-channel selector is useful where several source paths must be directed through a common output stage, while the integrated ladder reduces external passive volume-control requirements. Designers should verify the complete pin assignment and exposed-terminal requirements against the manufacturer datasheet before layout release. Decoupling should be placed close to the supply pins, analog ground returns should remain low impedance, and unused inputs should be handled according to the datasheet. The 7 V minimum supply must be respected during startup, and input amplitude should remain within the stated 4.5 Vrms capability. This page consolidates the documented architecture, key electrical performance, packaging information, sourcing path, and engineering considerations for engineers evaluating the BD3823FV-ME2 in legacy NTSC/PAL recording and audio-routing designs.

RFQ پەیوەندی
BD3826FS-E2 - 3-Channel Audio Switch | ROHM Semiconductor
BD3826FS-E2

BD3826FS-E2 - 3-Channel Audio Switch | ROHM Semiconductor

ROHM Semiconductor BD3826FS-E2 is a three-channel audio signal switch IC for DVD recorders, presented in a 32-SSOP-A surface-mount package. The device accepts a 2.5 V to 5.5 V supply range and provides analog signal routing for multi-channel audio systems. Its 32-pin package supports the control and signal connections required by a complex consumer-audio signal path. An audio switch IC is an interface component that routes left, right, and related analog audio channels between circuit sections. In the broader electronics hierarchy, it belongs to the audio interface IC class, connects to signal-path ICs such as amplifiers, codecs, and converters, and ultimately supports complete consumer-audio systems. Its primary role is channel selection rather than signal amplification or digital-to-analog conversion. The BD3826FS-E2 is identified as a three-channel switch with a 2.5 V to 5.5 V operating range. These characteristics make it suitable for low-voltage, multi-channel consumer equipment in which several analog sources must be selected and passed to downstream audio circuitry. The manufacturer identifies DVD-recorder signal switching as a principal application for the BD3826FS family. The 32-SSOP-A construction provides a practical surface-mount footprint for compact boards while exposing the control and analog-channel connections required by a three-channel device. Because this is an analog routing component, board-level implementation must account for source impedance, grounding, channel isolation, and the prevention of unwanted pop or noise. Stable supply decoupling and short signal traces are particularly important when the switch sits close to amplifiers or system ground references. Typical uses include DVD-recorder audio routing, stereo and multichannel entertainment equipment, analog source selection, and other consumer-audio products that require coordinated switching of multiple signals. The BD3826FS-E2 is most appropriate when the design uses a compatible three-channel routing architecture and can verify the complete pin assignments and control timing against the manufacturer datasheet before layout approval. Designers should verify the pin description table, control logic, recommended application circuit, and external-component requirements in the ROHM datasheet. If the original PCB has already been laid out for this device, preserve its footprint and verify signal levels against the downstream amplifier input range. A footprint-compatible replacement should not be assumed unless its pinout, control interface, supply range, and channel behavior have been checked directly. This product record combines the verified identity, package, channel count, supply range, application, and ordering information with structured design guidance for signal integrity, layout, and replacement assessment. It also distinguishes a true pin-compatible substitute from merely related audio-switching devices, helping engineers make a controlled sourcing decision without changing the board architecture.

RFQ پەیوەندی
BD3841FS-E2 - 9-Channel Stereo Input Selector | ROHM
BD3841FS-E2

BD3841FS-E2 - 9-Channel Stereo Input Selector | ROHM

The ROHM BD3841FS-E2 is a 9-channel stereo input selector and audio switch IC with a 2-wire serial control interface, supplied in a 32-SSOP-A package. It supports 6-channel or 9-channel stereo input arrangements, features low cross-talk between channels, and is designed for multi-room entertainment and multi-source recording systems. The device operates from 10 V to 14.6 V according to its distributor product information. An audio input selector is an analog signal-routing IC that chooses among multiple audio sources while preserving the selected channel’s signal integrity. In the broader component hierarchy, the BD3841FS-E2 belongs to analog switches and multiplexers, which are signal-path ICs used to route audio rather than amplify, digitize, or decode it. Its switching architecture allows several source and volume-control functions to share a serial control bus within a home-theater or multi-zone audio system. The principal features include support for 2-room entertainment and 2-source recording, simultaneous control of compatible six-channel volume LSIs, and expansion to 14 input channels by combining a BD3841FS with a BD3843FS. ROHM highlights excellent cross-talk characteristics produced by its original switching pattern. These characteristics are particularly relevant when adjacent channels carry different program sources and unintended source bleed would be audible. The BD3841FS-E2 supports 6-channel and 9-channel stereo input-selection configurations and uses a 2-wire control connection, reducing the number of serial lines required by the system controller. The manufacturer’s example-circuit guidance emphasizes validating external component values and circuit characteristics for the intended application, since external networks and connected circuitry can affect static and transient performance. Typical uses include multi-room home-entertainment receivers, multi-source recording equipment, stereo selector panels, and audio/video receiver input routing. It can also participate in a larger 14-channel arrangement alongside the BD3843FS and compatible BD3813KS, BD3815KS, BD3816K1, or BD3817KS volume-control devices controlled over the same serial bus. Designers should preserve the pin assignments and exposed pad requirements shown in the ROHM datasheet when laying out the 32-SSOP-A footprint. The audio path should be evaluated for insertion loss, off-channel isolation, crosstalk, and pop-noise behavior across every source combination that the product will present to users. This page organizes the confirmed operating information, package details, source-control architecture, application fit, and verified cross-reference context into an engineering-focused resource. It also identifies the specific electrical and pin-level details that should be confirmed in the manufacturer datasheet before a new layout or replacement design is released.

RFQ پەیوەندی
BD3843FS-E2 - 6-Channel Stereo Input Selector | ROHM
BD3843FS-E2

BD3843FS-E2 - 6-Channel Stereo Input Selector | ROHM

The ROHM BD3843FS-E2 is a 6-channel stereo input selector and audio function-switch IC built around two independently controlled output systems. According to the manufacturer datasheet, it accepts two 6-channel input groups, provides a 2-channel recording output and a 1-channel line output, and includes built-in buffer amplifiers. The device is offered in a 24-pin SSOP-A24 surface-mount package and uses a two-wire serial control bus compatible with 3.3 V and 5 V control systems. An audio function-switch IC is a specialized analog interface device that routes multiple audio sources within an audio system while preserving channel isolation and signal integrity. In the product hierarchy, the BD3843FS-E2 belongs to the broader family of analog audio processors, function switches, and interface ICs. Its internal routing architecture allows one input group to be selected for recording while another group feeds the line output, making it useful in multi-source entertainment equipment that must switch audio paths without continuous external relay noise. Key features include independent control of two output systems, support for simultaneous operation with six-channel and seven-channel volume LSIs, and the ability to build a 14-channel input arrangement by combining BD3843FS and BD3841FS devices. The manufacturer also highlights the original pattern layout for excellent cross-talk characteristics between channels. A built-in buffer amplifier reduces the need for additional output buffering in suitable line-level designs, while the serial interface simplifies connection to a system controller. The BD3843FS-E2 supports 2-room, 2-source entertainment and recording systems. It can be paired with the BD3813KS and BD3815KS six-channel volume LSIs, or with the BD3816K1 and BD3817KS seven-channel volume LSIs, through the shared serial control bus. This arrangement supports coordinated input selection and volume control in home-theater equipment, multi-room audio systems, car audio systems, and other stereo products with several local sources. Because the device performs analog routing and buffering rather than high-power amplification, it belongs near the line-level signal path and requires suitable source impedance, trace routing, grounding, and decoupling. The 3.3 V or 5 V serial-control compatibility permits integration with both legacy 5 V control logic and lower-voltage systems. Confirm the complete electrical limits and pin assignments in the manufacturer datasheet before finalizing a board design. This product page combines the manufacturer’s functional description with practical application guidance, interface relationships, sourcing routes, and a structured view of the BD3843FS-E2’s role in multi-source stereo equipment. It emphasizes design usage rather than repeating only catalog identifiers, helping engineers identify whether the selector architecture matches their channel-count, control-bus, recording-output, and line-output requirements.

RFQ پەیوەندی
BD3869AF-E2 2-Channel I2C Audio Processor | ROHM
BD3869AF-E2

BD3869AF-E2 2-Channel I2C Audio Processor | ROHM

ROHM Semiconductor BD3869AF-E2 is a two-channel audio signal processor designed for television audio systems and other consumer-audio applications. The device combines integrated audio processing with I2C control, supports as many as three channels simultaneously, and uses a Bi-CMOS process. It is packaged for surface-mount assembly in an 18-SOP package, with tape-and-reel packaging identified for the -E2 ordering code. An audio signal processor is an application-specific integrated circuit that adjusts or manages audio signals within a larger signal chain. Unlike a general-purpose codec, which primarily performs conversion between analog and digital representations, this device is designed around predefined audio-control functions. In the BD3869AF family, one prominent function is loudness adjustment linked to volume attenuation, allowing a television or similar system to coordinate perceived loudness with the selected volume level. The processor also provides I2C bus control for integration with a system controller. The BD3869AF-E2 supports a control-voltage range of 3.3 V to 5.5 V and allows a maximum of three channels to be used simultaneously. Its two-channel architecture makes it suitable for stereo television audio paths, while the multi-channel capability provides flexibility for systems that also need an additional processed channel. The -E2 variant is identified with surface-mount, tape-and-reel handling for automated production assembly. The Bi-CMOS implementation combines bipolar circuitry with CMOS circuitry in one monolithic integrated circuit. In the BD3869AF/BD3869AF-E2 family, this process supports the analog signal-processing functions required by the television audio processor while also enabling the digital control functions associated with its I2C interface. The manufacturer describes the BD3869AF and BD3869AF-E2 as an audio sound processor for TV systems, positioning the device within the broader hierarchy of consumer-audio ICs, audio signal processors, and application-specific semiconductors. Typical applications include television speaker-path control, stereo television audio processing, volume-attenuation coordination, and sound systems that require programmable audio behavior through an I2C bus. The processor can be paired with a television audio amplifier when a system requires an external power stage after low-level signal processing. It may also be used in other consumer-audio products that can reproduce the required signal functions and implement the corresponding control protocol. When designing around the BD3869AF-E2, confirm the complete pin assignment, analog signal levels, control registers, and external-component recommendations in the Rohm datasheet before finalizing the PCB. Pay particular attention to the 18-SOP footprint, the 3.3 V to 5.5 V control-voltage range, and the interface requirements of the host controller. Decoupling, grounding, and analog-versus-digital partitioning should follow the manufacturer’s reference layout to reduce noise coupling into the processed audio paths. This product record combines the verified device identity, package format, control interface, channel capability, process technology, and sourcing context with practical design guidance. It also distinguishes the exact BD3869AF-E2 orderable device from unsupported claims about other package variants and provides a clear basis for checking datasheets, pin assignments, lifecycle status, and replacement requirements.

RFQ پەیوەندی
BD3884FS-E2 2-Channel Audio Processor | ROHM
BD3884FS-E2

BD3884FS-E2 2-Channel Audio Processor | ROHM

The ROHM Semiconductor BD3884FS-E2 is a two-channel audio signal processor for television sound systems, packaged in a 24-pin SSOP surface-mount package. Its headline features include separate processing for two audio channels, integrated automatic gain control for balancing differences among input sources, and a compact 24-SSOP footprint suitable for space-constrained television and consumer-electronics designs. The device is identified as a tone-control circuit in component listings. An audio signal processor is a specialized analog integrated circuit that conditions audio signals before they reach amplifiers, speakers, or downstream digital converters. Within the product hierarchy, the BD3884FS-E2 is an audio signal processor, an audio special-purpose IC, and a semiconductor. Its two-channel organization permits paired stereo signals to be processed consistently while reducing the component count compared with separate single-channel circuits. The manufacturer datasheet identifies a built-in AGC circuit that adjusts the sound difference among input sources. This function is useful when signals arrive at substantially different levels because the processor can help reduce level imbalance before downstream amplification. The BD3884FS-E2 also appears in distributor classifications as a TV audio amplifier or sound processor, identifying television audio conditioning as its principal application area. The BD3884FS-E2 combines tone control with two-channel audio processing in one monolithic integrated circuit. Its surface-mount SSOP-24 construction supports automated PCB assembly while requiring less board area than a larger through-hole package. Because audio behavior depends on external resistors, capacitors, source impedance, and the surrounding signal path, designers should reproduce the manufacturer application circuit and verify channel balance, gain behavior, distortion, and stability in the finished television design. Typical implementations include stereo television speaker systems, television main-audio processing, audio source switching and level balancing, and consumer electronics requiring a dedicated tone-control stage. The integrated AGC can be particularly valuable when multiple source paths produce inconsistent volume levels. For battery-powered portable products, power consumption must also be checked because analog signal processors commonly remain active whenever the television audio subsystem is enabled. A key design consideration is that the device does not replace the final power amplifier. Place it before the audio output amplifier and observe the signal levels, impedance, and grounding arrangement specified in the manufacturer datasheet. PCB layout should keep audio traces away from switching nodes and high-current return paths, while stable decoupling and grounded return paths help preserve low-level audio fidelity. This product page consolidates the exact device identity, package information, sourcing details, functional attributes, and engineering guidance for the BD3884FS-E2. It also distinguishes documented capabilities from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate the part efficiently before beginning a television audio-board design.

RFQ پەیوەندی
CS3308-CQZR - 8-Ch Analog Volume Control, 48-LQFP | Cirrus Logic
CS3308-CQZR

CS3308-CQZR - 8-Ch Analog Volume Control, 48-LQFP | Cirrus Logic

The Cirrus Logic CS3308-CQZR is a high-performance, low-power, 8-channel digitally controlled analog volume control IC designed for high-end audio systems, housed in a 48-pin LQFP (7x7 mm) package with surface-mount mounting. Key specifications include 8 independent volume channels, configurable zero-crossing detection for glitch-free level changes, a serial control interface compatible with I2C and SPI, a supply voltage range of 3.1 V to 5.25 V, and the ability to address up to 128 CS3308 devices on a single 2-wire I2C or 3-wire SPI bus for high-channel-count systems. The device targets professional audio equipment and consumer electronics that demand clean, click-free volume transitions. A digital volume control IC is an integrated circuit that performs attenuation or amplification of analog audio signals under the command of a microcontroller or DSP, replacing mechanical potentiometers in modern equipment. Within the audio signal chain, it sits between the source selector or DAC output and the power amplifier, and it belongs to the broader family of audio special-purpose ICs alongside DACs, ADCs, and audio amplifiers. Compared with mechanical potentiometers, a digitally controlled attenuator offers precise repeatability, remote control, memory recall, and absence of mechanical wear. Key features of the CS3308-CQZR include 8 independent channels with 0.5 dB step resolution, configurable zero-crossing detection to eliminate zipper noise during volume changes, a wide supply range of 3.1 V to 5.25 V suitable for 3.3 V and 5 V system rails, selectable I2C or SPI serial control interface, and hardware-addressable device IDs that allow up to 128 cascaded devices on a single bus. The combination of fine resolution and zero-crossing logic preserves audio signal integrity during level transitions. Technically, the CS3308 uses a resistive ladder network with CMOS switches and an internal zero-crossing detector that holds the wiper position until the audio waveform crosses zero, suppressing audible artifacts. The architecture provides very low total harmonic distortion plus noise (THD+N) and high channel-to-channel matching, which are essential parameters for multi-channel professional audio gear. Programmable address pins enable bus expansion without adding microcontroller I/O. Typical applications include professional audio mixing consoles, multichannel AV receivers and amplifiers, broadcast studio equipment, automotive head units and infotainment amplifiers, and home theater preamplifiers. In each case the CS3308 replaces mechanical or electromechanical volume controls with a precise, software-driven solution that supports remote control and preset recall. When designing with the CS3308-CQZR, ensure that analog input signals remain within the recommended common-mode and clip range, place bypass capacitors close to the supply pins, and verify I2C/SPI address selection when stacking multiple devices on the same bus. The LQFP-48 footprint gives good thermal performance for continuous signal-path operation. This page synthesizes current distributor pricing and stock, drop-in alternatives with the same 48-LQFP footprint, and practical design notes not consolidated in the manufacturer datasheet, delivering actionable information for both new designs and legacy audio system refreshes.

RFQ پەیوەندی
CS4205-KQ - AC'97 Stereo Audio Codec | Cirrus Logic
CS4205-KQ

CS4205-KQ - AC'97 Stereo Audio Codec | Cirrus Logic

The Cirrus Logic CS4205-KQ is an AC'97 2.1-compliant stereo audio codec designed for PC multimedia systems, portable computing, and docking-station equipment. It uses CrystalClear delta-sigma and mixed-signal technology and is offered in a 48-pin LQFP package measuring 7 mm by 7 mm. Distributor records identify the interface as a 20-bit serial audio codec with 18-bit resolution on one associated serial interface. An audio codec is an interface IC that converts digital audio data into analog signals and analog audio inputs into digital data. In the signal chain, it sits between a host audio controller and external microphones, speakers, line inputs, or line outputs. AC'97 is a legacy Intel-defined audio interface that combines serialized digital audio with control, status, and general-purpose digital signals. The CS4205 therefore belongs to the broader audio codec, multimedia interface, and signal-conversion IC categories. The manufacturer datasheet identifies the CS4205 as a stereo co-dec for portable-computing systems. Its AC'97 2.1 compliance supports host-controlled multimedia operation, while CrystalClear delta-sigma and mixed-signal circuitry provides the analog-to-digital and digital-to-analog conversion functions. The 48-LQFP package exposes the complete AC'97 interface and associated analog and power connections on a compact surface-mount footprint. Technical implementation requires care because an audio codec combines sensitive analog inputs with a high-speed digital bus. The codec must be connected to a compatible AC'97 controller, supported audio drivers, analog input and output circuitry, and correctly decoupled supply rails. Clocking, digital signal integrity, analog grounding, output loading, and the relationship between the codec's sample rate and system timing must all be evaluated against the manufacturer datasheet. Typical uses include notebook-computer multimedia subsystems, docking stations, portable audio hardware, and legacy PC docking solutions. The Cirrus Logic CS4205 is particularly relevant when maintaining or repairing an existing AC'97 platform rather than designing a new system around a modern USB or I2S audio interface. Its stereo codec function supports the familiar PC multimedia architecture but requires legacy host, driver, and connector support. Designers should preserve the manufacturer's recommended decoupling and analog-layout practices and verify the exact pin assignments and signal names against the device documentation. AC'97 implementations can be sensitive to trace impedance, grounding, clock jitter, and power-supply noise. Because the CS4205-KQ is a legacy peripheral-oriented codec, software-driver availability and the continued support of the surrounding platform are as important as electrical compatibility. This page consolidates verified distributor availability, pricing, interface details, package information, and application context. It also distinguishes documented drop-in alternatives from related legacy codecs, helping engineers avoid treating a merely similar audio codec as a guaranteed pin-to-pin replacement.

RFQ پەیوەندی
CS4207-CNZ - 4-In/6-Out HD Audio Codec w/ HP Amp | Cirrus Logic (Tape & Reel)
CS4207-CNZ

CS4207-CNZ - 4-In/6-Out HD Audio Codec w/ HP Amp | Cirrus Logic (Tape & Reel)

The Cirrus Logic CS4207-CNZ is a highly integrated, multi-channel, low-power HD Audio Codec combining 192 kHz DACs, 96 kHz ADCs, 192 kHz S/PDIF transmitter and receiver, microphone preamp with bias voltage, and a ground-centered headphone driver, all in a 48-pin QFN (6x6 mm) package. The device operates from a single 3.3 V digital supply and a 5 V analog supply, delivers 24-bit serial audio data, and supports both HDA (HD Audio) and I2S serial interfaces to host controllers. An HD Audio Codec (High Definition Audio Codec) is a mixed-signal IC that converts digital audio streams from a PC/system chipset into line out the headphone, line stage, and microphone signals using internal DACs, ADCs, and headphone amplifiers. The codec sits in the audio signal chain between the host controller (e.g., Intel HDA-compliant chipset) and the analog transducers, and the term "HD Audio" denotes compliance with the Intel HDA Link specification rather than a frequency or bit-rate definition. CS4207-CNZ occupies the power-management IC and interface-IC tier of the audio subsystem, replacing multiple discrete ADCs, DACs, S/PDIF transceivers, and headphone amps with one package. The codec is the culmination of the signal chain (digital I/O -> mixed-signal codec -> analog out). Key features of the CS4207-CNZ include a multibit Delta-Sigma modulator architecture that enables infinite sample-rate adjustment from 32 kHz to 192 kHz, integrated ground-centered headphone driver (no DC blocking capacitors required at the output), microphone preamp with bias voltage source, and digital microphone interface support. The device supports 4 analog line/microphone inputs and 6 analog outputs, providing flexible routing for desktop, notebook, and embedded audio platforms. S/PDIF transmitter and receiver operate up to 192 kHz, allowing simultaneous digital audio transmission and reception. Technical depth: the Delta-Sigma modulator multibit topology achieves higher dynamic range and linearity than single-bit designs, while the ground-centered headphone architecture eliminates large output coupling capacitors, reducing BOM cost and improving low-frequency bass response. The codec integrates digital mixing, gain control, and jack-presence detection through the HDA link, simplifying host-driver interaction. Typical applications include desktop and notebook PC audio subsystems, all-in-one motherboards, embedded media players, and HD Audio-compatible docking stations. The wide format compatibility (HDA + I2S) and integrated HP amp make CS4207 well-suited for ultra-thin notebooks and small-form-factor designs where PCB area is constrained. When designing with this device, place the analog supply decoupling capacitors as close to the AVDD pins as possible to minimize analog-domain interference, and follow Cirrus Logic reference layout for the headphone output return paths to maintain low THD+N. The integrated HP amp eliminates external coupling capacitors but requires careful ground-centered routing to preserve low noise. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet. Engineers comparing HD Audio codec options for desktop/notebook designs will find the application notes, thermal considerations, and HDA source documents consolidated in this page.

RFQ پەیوەندی
CS4207-CNZR - 4-In/6-Out HD Audio Codec w/ HP Amp | Cirrus Logic
CS4207-CNZR

CS4207-CNZR - 4-In/6-Out HD Audio Codec w/ HP Amp | Cirrus Logic

The Cirrus Logic CS4207-CNZR is a highly integrated, multi-channel, low-power HD Audio Codec combining 192 kHz DACs, 96 kHz ADCs, 192 kHz S/PDIF transmitter and receiver, microphone preamp with bias voltage, and a ground-centered headphone driver, all in a 48-pin QFN (6x6 mm) package. The device operates from a single 3.3 V digital supply and a 5 V analog supply, delivers 24-bit serial audio data, and supports both HDA (HD Audio) and I2S serial interfaces to host controllers. An HD Audio Codec (High Definition Audio Codec) is a mixed-signal IC that converts digital audio streams from a PC/system chipset into line out the headphone, line stage, and microphone signals using internal DACs, ADCs, and headphone amplifiers. The codec sits in the audio signal chain between the host controller (e.g., Intel HDA-compliant chipset) and the analog transducers, and the term "HD Audio" denotes compliance with the Intel HDA Link specification rather than a frequency or bit-rate definition. CS4207-CNZR occupies the power-management IC and interface-IC tier of the audio subsystem, replacing multiple discrete ADCs, DACs, S/PDIF transceivers, and headphone amps with one package. The codec is the culmination of the signal chain (digital I/O -> mixed-signal codec -> analog out). Key features of the CS4207-CNZR include a multibit Delta-Sigma modulator architecture that enables infinite sample-rate adjustment from 32 kHz to 192 kHz, integrated ground-centered headphone driver (no DC blocking capacitors required at the output), microphone preamp with bias voltage source, and digital microphone interface support. The device supports 4 analog line/microphone inputs and 6 analog outputs, providing flexible routing for desktop, notebook, and embedded audio platforms. S/PDIF transmitter and receiver operate up to 192 kHz, allowing simultaneous digital audio transmission and reception. Technical depth: the Delta-Sigma modulator multibit topology achieves higher dynamic range and linearity than single-bit designs, while the ground-centered headphone architecture eliminates large output coupling capacitors, reducing BOM cost and improving low-frequency bass response. The codec integrates digital mixing, gain control, and jack-presence detection through the HDA link, simplifying host-driver interaction. Typical applications include desktop and notebook PC audio subsystems, all-in-one motherboards, embedded media players, and HD Audio-compatible docking stations. The wide format compatibility (HDA + I2S) and integrated HP amp make CS4207 well-suited for ultra-thin notebooks and small-form-factor designs where PCB area is constrained. When designing with this device, place the analog supply decoupling capacitors as close to the AVDD pins as possible to minimize analog-domain interference, and follow Cirrus Logic reference layout for the headphone output return paths to maintain low THD+N. The integrated HP amp eliminates external coupling capacitors but requires careful ground-centered routing to preserve low noise. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet. Engineers comparing HD Audio codec options for desktop/notebook designs will find the application notes, thermal considerations, and HDA source documents consolidated in this page.

RFQ پەیوەندی
CS4216-KL - 16-Bit Stereo Audio Codec | Cirrus Logic
CS4216-KL

CS4216-KL - 16-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4216-KL is a monolithic CMOS 16-bit stereo audio codec with integrated analog-to-digital and digital-to-analog conversion, filtering, and level setting. The device provides four audio inputs and two audio outputs for computer multimedia systems, supports word rates up to 50 kHz, and multiplexes left- and right-channel digital audio onto one serial data bus. It is supplied in a 44-pin PLCC package measuring 16.59 mm by 16.59 mm. An audio codec is a mixed-signal interface IC that converts audio between analog and digital domains. Its hierarchy is audio codec, multimedia codec, analog-to-digital and digital-to-analog converter, interface IC, and semiconductor. The CS4216 combines those functions so a digital computer system can accept analog audio sources, process samples digitally, and reproduce them through analog outputs without separate converter packages. Key capabilities include 16-bit stereo conversion, four analog inputs, two analog outputs, integrated interpolation and filtering functions, and a shared serial data interface. The CS4216 family targets computer multimedia, automotive, and portable audio equipment. Its integrated filtering and level-setting functions simplify board partitioning, while its multiplexed digital bus reduces the number of interconnects required between the codec and host or digital-audio controller. Technically, the monolithic CMOS implementation combines two conversion channels with shared digital serialization. Interpolation filters suppress unwanted high-frequency content and reduce aliasing in the reconstruction path, while the digital interface carries both stereo channels using word rates up to 50 kHz. The 44-pin PLCC offers a surface-mount package with J-lead termination and a body size of 16.59 mm by 16.59 mm. Typical uses include desktop and notebook multimedia audio, portable-audio equipment, automotive audio systems, and embedded systems requiring simultaneous analog capture and playback. In these applications, the four inputs can serve microphones, line-level sources, or other analog audio points, while the two outputs feed downstream amplifiers or audio routing stages. Host connectivity still requires correct timing, format, and signal-level design. The main design consideration is package and signal planning. Because the converter is a 44-pin PLCC rather than a modern leadless package, its footprint has limited long-term layout flexibility. Board layout should preserve analog and digital return paths, provide suitable bypassing, and follow the manufacturer's pin and reference-circuit guidance rather than assuming a generic codec footprint. This page consolidates the verified CS4216-KL identity, package, converter topology, application fit, and verified drop-in alternatives. It also distinguishes documented capabilities from parameters that still require confirmation from the manufacturer datasheet or a live distributor quotation.

RFQ پەیوەندی