بەرهەمەکان (190+)

WM8998ECS/R - 24-Bit Hi-Fi Audio Hub | Cirrus Logic
WM8998ECS/R

WM8998ECS/R - 24-Bit Hi-Fi Audio Hub | Cirrus Logic

Cirrus Logic WM8998ECS/R is a 24-bit HD audio hub and SLIMbus audio interface housed in a 117-WCSP package measuring 5.35 mm by 4.09 mm. The verified distributor records identify the device as a Hi-Fi coding-switch solution intended for compact digital audio systems. Its interface orientation makes it suitable for products that require a low-power, highly integrated audio front end while retaining a digital audio link to a host processor. An audio codec is an integrated circuit that converts digital audio data into an analog output and converts analog microphone or line inputs back into digital data. In the product hierarchy, a codec is an audio interface IC within the broader class of interface ICs. The WM8998ECS/R is positioned for portable and embedded audio functions where component count, board area, and host connectivity are important design constraints. The verified product listing specifically identifies a 24-bit HD audio interface, SLIMbus connectivity, and a 117-WCSP package. These confirmed attributes make the part relevant to smartphone, tablet, portable-media, headset, and embedded-audio designs. The 5.35 mm by 4.09 mm package reduces board footprint, although its 117-ball construction requires careful assembly, inspection, and PCB-layout planning. Technical evaluation must be completed against the manufacturer datasheet because the supplied distributor results do not expose the complete electrical tables. Sample rate coverage, supported clock rates, microphone bias, codec specifications, digital levels, power-supply requirements, and thermal limits are not available in the verified data and therefore cannot be safely inferred. Designers should also confirm the exact exposed-pad, ball-map, and recommended-land-pattern details before layout release. Typical implementation places the WM8998ECS/R between one or more analog audio transducers and a digital audio host connected through SLIMbus. Its integrated hub role can simplify system routing in devices containing speaker, headphone, microphone, and line-level audio paths. The correct external amplifiers, passive network, clocking, and decoupling must be selected from the manufacturer reference design rather than inferred from the distributor summaries. The primary design consideration is PCB implementation. A 117-WCSP package has a much denser interconnect than a conventional leaded package and can create soldering, inspection, and repair challenges. Confirm whether the assembled board will use optical inspection or X-ray inspection, and use the manufacturer-approved footprint and reflow profile to reduce assembly defects. The verified data does not expose pin names, so a complete ball assignment cannot be published here. This product record combines verified distributor pricing, package information, sourcing links, and engineering-oriented selection guidance. It also separates confirmed facts from unavailable datasheet parameters and avoids presenting generic codec specifications as facts about the WM8998ECS/R.

RFQ پەیوەندی
WM9701CPT Stereo Audio Codec | Texas Instruments
WM9701CPT

WM9701CPT Stereo Audio Codec | Texas Instruments

The Texas Instruments WM9701CPT is a stereo audio codec with an integrated analog audio channel and digital audio interface, supplied in a 28-pin TQFP package. The verified distributor data identifies it as an Audio Special Purpose / Audio Channel device and lists an LCSC starting price of $0.6762. Its primary role is converting digital audio data into analog stereo signals while supporting audio-system signal conditioning and analog output control. The package designation CPT identifies a 28-pin TQFP-compatible physical format, but detailed electrical limits, supported sample rates, interface modes, analog performance, and pin functions are not present in the supplied verification records. A codec is an audio interface integrated circuit that combines digital-to-analog conversion, analog signal paths, and control or communication functions. In the broader semiconductor hierarchy, an audio codec belongs to an audio interface IC, then to an interface IC and a mixed-signal semiconductor. This integration can reduce the number of separate converters and support components in consumer audio, communications, and embedded systems. For the WM9701CPT, however, the supplied data does not establish whether its digital interface is I2C, I2S, or another format, nor does it quantify the number of supported channels. The verified records provide three useful procurement anchors: DigiKey Marketplace lists WM9701CPT for purchase and shipment, Octopart identifies availability and pricing across two distributors, and LCSC lists the part as in stock from $0.6762. A separate distributor listing describes the device as an analog consumer audio/video IC. These sources support commercial availability, but they do not provide manufacturer lifecycle status, operating temperature, supply voltage, clock requirements, DAC resolution, SNR, THD, output impedance, or pin-level mapping. WM9701CPT is best evaluated as a legacy or inventory-dependent audio codec rather than assumed to be a currently designed modern USB audio solution. Before schematic release, an engineer should obtain the original manufacturer datasheet and confirm the CPT land pattern, exposed-pad requirements, digital interface, analog routing, clocking, and firmware or register expectations. The part number alone is not enough to establish drop-in compatibility or modernization safety. Potential audio applications include legacy consumer-audio systems, portable media equipment, communications terminals, and embedded products that already target this codec family. Such uses remain conditional because the supplied data does not verify operating conditions or signal paths. Component selection should be based on a complete datasheet review rather than the distributor category label. The main engineering risk is assuming that similarly named stereo codecs are interchangeable. Digital-interface timing, register maps, analog routing, package dimensions, exposed-pad treatment, and software initialization can differ even when the functional description is similar. Validate the replacement against the original schematic and PCB footprint before committing to an alternative. This page consolidates the verified distributor listings, separates confirmed procurement facts from missing technical data, and avoids inventing specifications, pin assignments, or drop-in replacements. Obtain the authoritative datasheet before layout release or production substitution.

RFQ پەیوەندی
WM9707SCFT/V - Stereo AC'97 Audio Codec | Cirrus Logic
WM9707SCFT/V

WM9707SCFT/V - Stereo AC'97 Audio Codec | Cirrus Logic

The Cirrus Logic WM9707SCFT/V is a stereo AC'97 revision 2.1 audio interface codec with one ADC, one DAC, 18-bit serial audio resolution, and S/PDIF output in a 48-pin 7 x 7 mm TQFP package. It combines analog audio conversion with digital AC'97 audio connectivity for legacy computer, communications, and embedded audio systems. An audio codec is an interface IC that converts analog sound into digital samples and digital audio streams into analog signals. The WM9707SCFT/V belongs to the AC'97 audio codec category within interface ICs and broader semiconductor signal-processing devices. Its digital interface supports communication between an audio codec and a host controller, while its analog inputs and outputs handle microphones, line-level sources, headphones, or powered speakers through external circuitry. The WM9707SCFT/V provides stereo conversion through one ADC and one DAC, with an 18-bit serial format identified in the product listing. It also includes S/PDIF output, allowing digital audio to leave the codec over a standardized digital interface. The 48-pin TQFP package provides the mixed-signal, digital-interface, clock, and power connections required for a complete stereo codec implementation. AC'97 revision 2.1 support makes this device relevant to legacy PC audio architectures, industrial control panels, embedded systems, and communications equipment that already use the AC'97 bus. Designers should treat clocking, analog grounding, input and output coupling, and digital signal return paths as central design considerations. Because the AC'97 interface is a mature architecture, it is most appropriate for new designs when its electrical and software compatibility have been confirmed against the complete system requirements. Typical uses include stereo line-input processing, microphone conditioning through external analog circuits, multimedia playback, industrial operator consoles, and embedded equipment that accepts an AC'97-compatible codec. The S/PDIF output can feed a downstream digital audio receiver, while the analog DAC output supports conventional amplified playback when paired with suitable output circuitry. A successful implementation requires stable analog and digital supplies, correct master-clock and bit-clock relationships, input and output filtering, and careful separation of analog and return currents. The component also requires PCB space for decoupling and signal routing around a 48-pin mixed-signal package. Confirm the complete pin-description table and application circuit in the manufacturer datasheet before assigning nets or making a board revision. This product page consolidates the identified codec architecture, package details, sourcing information, comparison points, and practical integration guidance. It emphasizes the verified AC'97, ADC, DAC, resolution, S/PDIF, and package characteristics that determine whether the WM9707SCFT/V fits an existing audio system.

RFQ پەیوەندی