بەرهەمەکان (190+)

WM8804GEDS/V - 1:1 S/PDIF Transceiver | Cirrus Logic
WM8804GEDS/V

WM8804GEDS/V - 1:1 S/PDIF Transceiver | Cirrus Logic

Cirrus Logic WM8804GEDS/V is a high-performance consumer-mode S/PDIF audio transceiver with one received channel and one transmitted channel, supplied in a 20-lead Pb-free SSOP package. It supports a 2.7 V to 3.6 V supply range, an industrial temperature grade of -40°C to +85°C, a 1:1 digital audio interface, and an internal PLL for generating common audio clocks. An S/PDIF transceiver is an interface IC that converts digital audio signals between consumer Sony/Philips digital audio format and a parallel digital audio interface. Within the broader semiconductor hierarchy, the WM8804 is a digital audio interface IC, an interface IC, and a signal-processing semiconductor used to connect audio converters, receivers, and digital playback systems. The WM8804 can use either a crystal-derived clock or an externally supplied high-quality master clock. Its clock-recovery architecture provides low-jitter recovery of the master clock carried by an S/PDIF stream, while the internal PLL can generate commonly used audio clocks. A dedicated CLKOUT pin provides access to a generated or recovered clock for associated audio-processing circuitry. The 1:1 digital interface supports integration between S/PDIF-capable audio hardware and a digital audio bus. A clock derived from the incoming S/PDIF signal can support system synchronization, while the transmit path provides S/PDIF output from a compatible digital audio source. The combination of integrated PLL functions and clock output reduces the amount of external clock-generation circuitry required in consumer audio products. Typical applications include digital home-theater equipment, CD and DVD player subsystems, digital audio receiver boards, active speaker interfaces, consumer home-audio products, and industrial digital audio equipment. The 20-lead SSOP package supports compact circuit layouts, although its larger lead pitch and body dimensions should be considered against smaller surface-mount alternatives when space is constrained. Designers should provide a clean and stable 2.7 V to 3.6 V supply, route the S/PDIF data and clock signals away from noisy switching nodes, and ensure the selected master-clock source has adequate low-jitter performance. Decoupling and exposed-ground layout should follow the manufacturer datasheet recommendations, particularly when the transceiver is adjacent to a switching power supply or a high-speed digital processor. This product summary consolidates the verified distributor specifications, manufacturer-oriented datasheet references, package information, and design considerations into one engineering-focused guide. It also distinguishes documented electrical facts from unavailable pricing, lifecycle, pin-level, and equivalent-part information so engineers can assess fit without relying on unverified substitutions.

RFQ پەیوەندی
WM8850GEFL/RV 24-Bit 6-Channel HDA Codec | Cirrus Logic
WM8850GEFL/RV

WM8850GEFL/RV 24-Bit 6-Channel HDA Codec | Cirrus Logic

The Cirrus Logic WM8850GEFL/RV is a 24-bit multichannel High Definition Audio codec with HDA and S/PDIF interfaces, four ADC channels, six DAC channels, and support for three stereo DAC outputs in a 48-pin WFQFN package measuring 7 x 7 mm. The device is designed for embedded systems requiring multichannel digital audio and compatibility with the Intel High Definition Audio specification revision 1.0. An audio codec is an interface IC that converts between digital audio data and analog microphone or line-level signals. The WM8850 belongs to the codec hierarchy within audio interface ICs and broader signal-chain semiconductors. Its integrated converters allow an embedded host to transmit digital audio over HDA or S/PDIF while handling analog audio input and output through dedicated converter channels. Key features include 24-bit audio resolution, six DAC channels, four ADC channels, three stereo DACs for 5.1-channel audio, and a 48-QFN surface-mount package. The HDA 1.0-compatible interface supports integration with industry-standard audio controllers, while S/PDIF provides a digital audio connection for compatible equipment. Its 0.50 mm package pitch supports compact consumer and embedded designs. Technically, the codec combines multichannel recording and playback paths in one device. Four ADC channels provide analog-to-digital conversion for microphone or line-input sources, while the six DAC outputs support up to six playback channels. The three stereo DAC architecture enables six-channel 5.1 playback without requiring three separate stereo converter packages, reducing board area and simplifying digital-audio routing. Typical applications include consumer AV receivers, home-theater equipment, set-top boxes, networked media systems, automotive infotainment units, industrial panels, and other embedded multimedia products. The HDA and S/PDIF interfaces make it particularly suitable for systems that already use a digital audio host processor rather than a purely analog audio path. PCB design should preserve the exposed-pad thermal and electrical requirements of the WFQFN package and place analog input, output, and supply connections according to the manufacturer datasheet. Keep sensitive audio traces away from digital clocks and switching nodes, and verify the recommended decoupling network before signal-path layout is finalized. This page consolidates the device identification, package information, converter configuration, interface features, sourcing paths, and practical replacement guidance. It also distinguishes documented drop-in candidates from unrelated codec families so engineers can assess PCB reuse without confusing functional similarity with pin compatibility.

RFQ پەیوەندی
WM8860GEFL/RV - 32-Bit HD Audio Codec | Cirrus Logic
WM8860GEFL/RV

WM8860GEFL/RV - 32-Bit HD Audio Codec | Cirrus Logic

Cirrus Logic WM8860GEFL/RV is a 32-bit, multichannel high-definition audio codec with 2 ADC channels, 2 DAC channels, and 4-channel transmit and receive capability in a 48-QFN 7 x 7 mm package. It is designed for audio systems requiring integrated high-definition playback, capture, digital audio routing, and S/PDIF connectivity. A high-definition audio codec is an interface IC that converts between digital audio data and analog signals. It sits between a digital audio engine, such as an application processor, and external analog audio circuitry. The WM8860 belongs to the broader hierarchy of integrated circuits, interface ICs, audio codecs, and semiconductor devices, combining conversion, digital mixing, and digital-audio interfaces in one component. The device provides two ADC and two DAC channels, a 32-bit audio architecture, and 4-channel high-definition audio transmit and receive functionality. It also includes an S/PDIF transmitter identified by the manufacturer datasheet as compatible with IEC-60958-3. Two dedicated GPIO pins provide control for external amplifiers or additional system components, reducing the need for separate general-purpose control logic in straightforward audio designs. The WM8860 combines multiple signal-processing functions within the codec. Its ADC channels support digital capture of analog audio, while its DAC channels support high-definition analog playback. The S/PDIF interface allows digital audio to leave the codec for external digital audio equipment. Four-channel transmit and receive operation supports contemporary surround-sound and multi-zone architectures without requiring several separate codec packages. Typical uses include home-theater equipment, multichannel audio receivers, powered speakers, automotive infotainment systems, networked-audio equipment, and portable consumer products. In each case, the codec can centralize analog-to-digital capture, digital-to-analog playback, digital routing, amplifier control, and S/PDIF output while preserving a compact 48-QFN footprint. PCB design should preserve the analog and digital separation required by the codec layout and keep sensitive audio routes away from switching nodes and high-current return paths. The exposed-pad thermal structure requires careful ground-plane and via layout for predictable thermal performance. Input and output filtering must be designed for the intended sample rates, source impedance, and external amplifier characteristics rather than copied from a generic reference circuit. This product page consolidates the confirmed 32-bit codec configuration, 2-ADC/2-DAC channel count, 4-channel transmit and receive capability, 48-QFN package information, S/PDIF support, GPIO resources, verified source links, and engineering guidance into one practical selection and integration resource.

RFQ پەیوەندی
WM8860GEFL/V - 32-Bit 4-Channel HDA Audio Codec | Cirrus Logic
WM8860GEFL/V

WM8860GEFL/V - 32-Bit 4-Channel HDA Audio Codec | Cirrus Logic

The Cirrus Logic WM8860GEFL/V is a 32-bit multichannel High Definition Audio codec with two stereo DACs, four output channels, and Intel High Definition Audio specification revision 1.0 compatibility in a 48-pin QFN package measuring 7 mm by 7 mm. It integrates digital audio interfaces, analog audio conversion, and codec control into a single device for multichannel consumer audio equipment. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and, in some designs, converts analog input into a digital stream. A codec sits within the broader audio interface hierarchy and connects a digital audio bus, analog output circuitry, clocks, control logic, and sometimes microphone inputs. The WM8860GEFL/V is therefore positioned between an HDA controller and the analog speaker or headphone output stage of a finished audio system. The WM8860 family provides two high-performance stereo DACs, enabling four channels of high-definition audio from one package. Its 32-bit audio interface and HDA revision 1.0 compatibility allow it to operate with industry-standard HDA controllers. The 48-QFN package supports compact integration in consumer electronics while providing the mixed-signal connections required for digital audio routing, analog outputs, and codec configuration. The device uses a registered I2C-style control interface and supports vendor-specific control verbs in addition to the standardized HDA verbs implemented by the WM8860. Its system-level role depends on correct clock generation, I2C address configuration, firmware initialization, output-path routing, and analog implementation. These controls allow a host controller to configure playback paths, mixer behavior, and digital volume while the integrated DACs generate the final analog audio channels. Typical applications include desktop computers, home-theater equipment, multichannel active speakers, game consoles, audio docking stations, and consumer media systems with Intel HDA-compatible controllers. It is particularly appropriate where four analog output channels are required without using multiple separate codec packages. System-level audio performance still depends on the external clock source, power supplies, analog output network, grounding, and speaker or headphone amplifiers connected downstream. Design the 7 mm by 7 mm footprint with thermal-via access beneath the exposed pad and keep sensitive analog routing away from digital clocks and switching supply nodes. Validate every external component value against the manufacturer reference schematic and recommended layout. The MPN suffix identifies a specific orderable configuration, so board releases should confirm the full WM8860GEFL/V designation rather than relying only on the WM8860 family name. This page consolidates the verified package, interface, channel-count, and HDA-compatibility details, adds application-specific engineering guidance, and separates confirmed characteristics from parameters that must be confirmed in the manufacturer datasheet before schematic release.

RFQ پەیوەندی
WM8903CLGEFK - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8903CLGEFK

WM8903CLGEFK - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8903CLGEFK is a 24-bit stereo audio codec with 2 ADC channels, 2 DAC channels, and a 40-pin QFN package measuring 5 x 5 mm. Designed as an ultra-low-power, high-fidelity audio interface, it supports portable-audio signal conversion while combining microphone capture, headphone or line output, and digital audio interfacing in one compact device. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, line, or headphone signals. Within the signal-chain hierarchy, a codec sits between an audio source, such as a microphone or line input, and a digital audio bus such as I2S or I2C. The WM8903 therefore belongs to the broader audio interface IC and low-power mixed-signal semiconductor category. The device provides 24-bit stereo conversion through two ADC and two DAC channels. This 24-bit format allows capture and playback systems to retain substantially more signal detail than conventional 16-bit consumer audio interfaces. Its ultra-low-power design focus makes it appropriate for portable equipment where battery life, heat, and board area constrain the audio subsystem. The WM8903CLGEFK combines stereo analog conversion, digital audio control, and integrated audio processing in a 40-QFN package. Its 5 x 5 mm footprint supports compact layouts, while the exposed-pad package enables direct thermal coupling to the PCB when the device dissipation requires it. The package's exposed pad must be connected according to the manufacturer layout guidance rather than treated as an unused pin. Typical uses include portable media players, smart phones, tablets, connected personal audio products, and other battery-powered systems that require microphone capture and low-noise stereo playback. The same device can also serve compact embedded audio platforms where one codec must support analog recording, headphone output, digital bus communication, and programmable audio routing. PCB design should prioritize short, symmetric analog paths between external audio connectors, microphone circuitry, and the codec. Input and output bypass capacitors should be placed close to their associated pins, while digital clock, data, and control traces should remain isolated from sensitive analog nodes. Confirm pin orientation, exposed-pad connections, supply sequencing, and supported digital audio formats against the manufacturer datasheet before release. This page combines the device's confirmed stereo codec, 24-bit conversion, 40-QFN packaging, and low-power positioning with practical guidance for layout, sourcing, and qualification. It also distinguishes the confirmed WM8903CLGEFK/R listing from true drop-in alternatives, preventing packaging-code changes from being presented as different engineering solutions.

RFQ پەیوەندی
WM8903CLGEFK/R - 24-Bit Stereo Audio Codec | Cirrus Logic (Tape & Reel)
WM8903CLGEFK/R

WM8903CLGEFK/R - 24-Bit Stereo Audio Codec | Cirrus Logic (Tape & Reel)

Cirrus Logic WM8903CLGEFK/R is a 24-bit stereo audio codec with 2 ADC channels, 2 DAC channels, and a 40-pin QFN package measuring 5 x 5 mm. Designed as an ultra-low-power, high-fidelity audio interface, it supports portable-audio signal conversion while combining microphone capture, headphone or line output, and digital audio interfacing in one compact device. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, line, or headphone signals. Within the signal-chain hierarchy, a codec sits between an audio source, such as a microphone or line input, and a digital audio bus such as I2S or I2C. The WM8903 therefore belongs to the broader audio interface IC and low-power mixed-signal semiconductor category. The device provides 24-bit stereo conversion through two ADC and two DAC channels. This 24-bit format allows capture and playback systems to retain substantially more signal detail than conventional 16-bit consumer audio interfaces. Its ultra-low-power design focus makes it appropriate for portable equipment where battery life, heat, and board area constrain the audio subsystem. The WM8903CLGEFK/R combines stereo analog conversion, digital audio control, and integrated audio processing in a 40-QFN package. Its 5 x 5 mm footprint supports compact layouts, while the exposed-pad package enables direct thermal coupling to the PCB when the device dissipation requires it. The package's exposed pad must be connected according to the manufacturer layout guidance rather than treated as an unused pin. Typical uses include portable media players, smart phones, tablets, connected personal audio products, and other battery-powered systems that require microphone capture and low-noise stereo playback. The same device can also serve compact embedded audio platforms where one codec must support analog recording, headphone output, digital bus communication, and programmable audio routing. PCB design should prioritize short, symmetric analog paths between external audio connectors, microphone circuitry, and the codec. Input and output bypass capacitors should be placed close to their associated pins, while digital clock, data, and control traces should remain isolated from sensitive analog nodes. Confirm pin orientation, exposed-pad connections, supply sequencing, and supported digital audio formats against the manufacturer datasheet before release. This page combines the device's confirmed stereo codec, 24-bit conversion, 40-QFN packaging, and low-power positioning with practical guidance for layout, sourcing, and qualification. It also distinguishes the confirmed WM8903CLGEFK/R/R listing from true drop-in alternatives, preventing packaging-code changes from being presented as different engineering solutions.

RFQ پەیوەندی
WM8904CGEFL/V - Stereo Audio Codec 24-Bit | Cirrus Logic
WM8904CGEFL/V

WM8904CGEFL/V - Stereo Audio Codec 24-Bit | Cirrus Logic

The Cirrus Logic WM8904CGEFL/V is an ultra-low-power, high-performance stereo audio codec with a 24-bit signal path, integrated stereo ADC and DAC channels, headphone and line outputs, and a 32-pin QFN package measuring 4 mm by 4 mm. It is designed for portable audio equipment where playback efficiency, compact construction, and elimination of output coupling capacitors are important. The codec also uses a dual-mode charge-pump architecture within its ground-referenced Class-W headphone amplifiers. An audio codec is an integrated semiconductor that converts between digital audio data and analog microphone, line, and headphone signals. In the signal chain, an ADC represents incoming analog audio as digital samples, while a DAC converts digital playback data back into an analog output. The WM8904 combines these functions with integrated headphone and line-output circuitry, reducing the number of external active components required in portable audio systems. The WM8904CGEFL/V supports stereo playback through ground-referenced headphone and line outputs. Because the outputs are ground referenced, their signal is centered around the analog ground reference rather than a divided supply midpoint. The manufacturer states that the outputs eliminate AC coupling capacitors and include common-mode feedback paths that help reject ground noise. These features are particularly useful in portable products where component count, board area, power consumption, and low-frequency noise directly affect user experience. Its Class-W headphone amplifiers incorporate a dual-mode charge-pump architecture to optimize efficiency and power consumption during playback. This architecture supports the device's ultra-low-power design goal while providing integrated headphone drive. The 24-bit codec resolution and two-channel conversion capability make the device suitable for high-quality voice, music, and multimedia playback. Exact conversion rates, signal-to-noise ratios, headphone-output limits, clock frequencies, and supply-voltage limits should be confirmed in the manufacturer datasheet for the selected production configuration. Typical applications include smartphones, portable media players, personal audio devices, portable game consoles, and compact connected audio products. In a smartphone or portable player, the codec can accept digital audio from an application processor, convert it through the DAC, and drive stereo headphones or line outputs while minimizing external passive-component count. The same architecture is suitable for industrial test equipment or voice-enabled systems where low power and a small footprint are important. Layout should prioritize short, quiet analog paths between the codec, microphone or line inputs, and headphone outputs. Place decoupling capacitors close to their associated supply pins and route digital clock and data signals away from sensitive analog inputs. Headphone and line output routing should also account for output impedance, cable loading, and the external components recommended by the manufacturer datasheet. The exposed-pad thermal and layout requirements in the package drawing should be followed to maintain reliable operation across the intended temperature range. This product page combines package, codec, interface, and amplifier details with drop-in replacement information, application guidance, comparison parameters, and PCB-focused design notes. It is structured to help engineers identify whether the WM8904CGEFL/V matches the required channel count, package footprint, power level, and portable-audio architecture before beginning board layout or production sourcing.

RFQ پەیوەندی
WM8940CGEFL/V Mono Codec with Speaker Driver | Cirrus Logic
WM8940CGEFL/V

WM8940CGEFL/V Mono Codec with Speaker Driver | Cirrus Logic

The Cirrus Logic WM8940CGEFL/V is a low-power mono audio codec with integrated microphone, headphone, speaker, and mono line-output support, operating from a 2.5 V to 3.6 V analog supply and a 1.71 V to 3.6 V digital supply. The device accepts 24-bit serial audio data, supports sample rates from 8 kS/s to 48 kS/s, and is packaged in a 24-QFN surface-mount package. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and converts analog microphone or line inputs back into digital data. Its hierarchy extends from codec and audio interface to analog and mixed-signal IC, then to interface IC and semiconductor. The WM8940 combines these conversion functions with integrated output drivers, reducing the number of external microphone, headphone, and speaker amplifier components required in portable audio equipment. The WM8940 supports differential or single-ended microphone input and includes speaker, headphone, and mono line-output drivers. Its advanced delta-sigma converters, digital decimation filters, and digital interpolation filters support audio processing from 8 kS/s through 48 kS/s. The manufacturer also identifies a selectable high-pass filter and four programmable notch filters, allowing the device to address microphone low-frequency rejection, wind noise, and other in-band acoustic problems. The 24-bit digital audio interface connects the codec to a host processor, while separate analog and digital supply domains support mixed-signal systems operating at different voltage levels. The analog supply range of 2.5 V to 3.6 V and digital supply range of 1.71 V to 3.6 V provide flexibility for portable consumer equipment. Integrated drivers reduce external amplification requirements, but output loading, thermal dissipation, and DC bias remain important layout considerations. Typical applications include digital still cameras, camcorders, portable media players, voice recorders, personal audio devices, and other battery-powered products requiring one-channel capture and playback. Its low-power mono architecture is particularly appropriate where a stereo codec would add cost, board area, and energy use without improving the intended recording or playback experience. The integrated headphone and speaker paths simplify portable-system design while retaining flexible input selection and digital audio processing. PCB design should keep analog microphone and output routes away from digital clock and serial-data traces, provide a continuous ground reference beneath the exposed pad, and decouple the analog and digital supply pins locally. Component values, filter settings, clock requirements, and output configuration must be selected using the manufacturer’s recommended application circuit and pin descriptions. The exposed thermal pad should be connected to the ground plane according to the package land pattern. This page combines the manufacturer’s device capabilities, lifecycle status, package information, and verified cross-reference results with practical application guidance. It also distinguishes the exact WM8940CGEFL/V order code from related packaging variants and separates confirmed drop-in replacements from functional alternatives that still require package and pin-level review.

RFQ پەیوەندی
WM8941GEFL/RV - 24-Bit Mono Audio Codec | Cirrus Logic
WM8941GEFL/RV

WM8941GEFL/RV - 24-Bit Mono Audio Codec | Cirrus Logic

Cirrus Logic WM8941GEFL/RV is a 24-bit mono audio codec with audio and video buffer-interface functions, packaged in a 28-QFN surface-mount package measuring 4 mm by 4 mm. The component is identified by distributor catalogs as an interface IC in the CODEC category and is associated with the Cirrus Logic WM8941 product family. Its compact package supports space-constrained audio equipment in which analog audio processing, digital audio conversion, and compact routing must coexist within a limited board area. An audio codec is an interface integrated circuit that converts digital audio data to and from analog signals while supporting the clocks, control logic, and signal paths required by audio equipment. In the broader electronics hierarchy, an audio codec belongs to interface ICs, then to integrated circuits and semiconductors. A mono codec is particularly useful when the system processes one primary analog channel while still requiring digital audio conversion, speaker or headphone support, or an embedded video-related audio path. The WM8941GEFL/RV is identified as a 24-bit device. Resolution alone does not determine the complete signal-chain performance: clock frequency, sample rate, analog front-end design, input and output impedance, dynamic range, distortion, and the selected operating mode also determine the achievable audio quality. Designers should therefore use the manufacturer datasheet and its recommended application circuit to select the appropriate filter, clock, decoupling, and output-stage components for the target audio bandwidth. The 28-QFN package creates a compact implementation but places a high share of connections beneath the device body. This supports dense PCB layouts while making careful escape routing important. Input, output, supply, ground, clock, control, and exposed-pad connections must follow the manufacturer’s land pattern and layout guidance. Thermal performance also depends on the exposed pad, copper area, internal planes, and the thermal burden generated by the selected operating mode. Typical design contexts include portable or embedded audio systems, multimedia devices, communication terminals, recording equipment, and other products requiring a compact mono audio conversion interface. In each case, the codec may sit between an audio source and a digital audio host, or between a digital audio engine and an analog transducer stage. Clock topology, grounding, signal routing, and startup behavior must be evaluated as a complete subsystem rather than as isolated component concerns. The primary engineering consideration is integration without compromising signal integrity. Keep analog and digital return currents separated where practical, place required bypass capacitors close to their supply pins, route clocks away from sensitive audio inputs, and use the exposed-pad copper area for both electrical return and thermal spreading. The manufacturer’s reference configuration should also be followed for filtering, resistor values, and gain-dependent components. This page consolidates the verified catalog identity, package information, sourcing guidance, compatibility limits, and practical implementation considerations for the WM8941GEFL/RV. It also distinguishes the observed device configuration from unverified electrical details, helping engineers evaluate the part without treating incomplete catalog data as a complete datasheet specification.

RFQ پەیوەندی
WM8941GEFL/V Mono CODEC with Speaker Driver | Cirrus Logic
WM8941GEFL/V

WM8941GEFL/V Mono CODEC with Speaker Driver | Cirrus Logic

The Cirrus Logic WM8941GEFL/V is a low-power, 24-bit mono audio CODEC with an integrated speaker driver, video buffer, microphone input, headphone output, and mono line output in a 28-QFN (4 mm x 4 mm) package. Designed for portable imaging and multimedia equipment, it combines several analog audio functions with a digital audio interface to reduce the number of external amplifiers and supporting components required in portable products. An audio codec is a mixed-signal interface IC that converts digital audio samples into analog signals and converts analog microphone or line-level audio into a digital format. A mono CODEC performs those functions for one audio channel, while an integrated speaker or headphone driver can directly load an output transducer. The WM8941GEFL/V places this signal chain in one compact surface-mount package suitable for portable digital still cameras, camcorders, and similar equipment. The device supports differential or single-ended microphone inputs, eliminating the need for a separate microphone amplifier in many portable designs. It also integrates drivers for speakers or headphones and provides a mono line output. These resources allow a compact system to implement microphone capture and audio playback while reducing board area and external component count. A separate integrated current-mode video buffer supports video output needs and includes short-circuit protection. The WM8941 family uses sigma-delta conversion for digital audio processing, as described in the manufacturer documentation for the closely related WM8941GEFL/RV version. The WM8941GEFL/V is identified in distribution records as a 24-bit mono CODEC in a 28-QFN (4 mm x 4 mm) package. Its design emphasizes portable-system integration rather than a separate collection of discrete analog audio blocks. Typical applications include portable digital cameras, camcorders, compact recording systems, and portable consumer devices requiring microphone recording and mono audio playback. It is particularly relevant where board area is constrained and the design needs integrated microphone, headphone, speaker, line-output, and video-buffer functions. Portable multimedia equipment benefits from the reduced component count and simplified analog routing created by combining these blocks. When laying out a design, follow the pin-description and application-circuit tables in the manufacturer datasheet for supply decoupling, analog and digital return paths, microphone biasing, output filtering, and exposed-pad connection. Keep analog signal paths short, separate sensitive microphone routing from digital and video paths, and connect the exposed thermal pad according to the package land pattern. The exact pin names and PCB footprint details must be taken from the official WM8941 datasheet rather than inferred from similar codec packages. This page consolidates the exact catalog identity, package information, functional description, sourcing routes, compatible-family context, and application guidance for the WM8941GEFL/V. It also identifies where engineering decisions require the manufacturer pin table, electrical limits, or application circuit, helping engineers move directly from component selection to a defensible portable-audio implementation.

RFQ پەیوەندی
WM8958ECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8958ECS/R

WM8958ECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8958ECS/R is a 24-bit stereo audio codec with 2 ADC channels, 4 DAC channels, I2S and PCM digital audio interfaces, and integrated stereo Class D/AB speaker plus Class W headphone drivers, housed in a 72-pin W-CSP package measuring 4.5 mm by 4.3 mm. An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, speaker, and headphone signals. It belongs to the codec and audio-interface hierarchy, combines an audio codec, integrated analog-to-digital converters and digital-to-analog converters, and ultimately falls under mixed-signal and signal-processing semiconductors. This integration reduces external components and board area in portable multimedia systems. The WM8958 is designed for smartphones and other portable multimedia devices. Key features include ultra-low-power operation, 24-bit audio conversion, stereo full-duplex asynchronous sample-rate conversion, multiple digital audio channels, integrated Class D/AB speaker amplification, and integrated Class W headphone amplification. It requires two external voltage supplies, while other internal supply rails are generated by integrated low-dropout regulators. Its architecture places an audio hub, converters, digital interfaces, and output-driver functions in one device. The digital side supports I2S and PCM formats, while the analog conversion section supports two ADC inputs and four DAC outputs. The integrated speaker and headphone drivers reduce the need for separate output amplifiers, although external passive filtering, routing, and decoupling networks may still be required by the final circuit design. Typical uses include smartphone and tablet audio hubs, portable media-player headsets, Bluetooth and wireless audio accessories, compact consumer-audio systems, and portable multimedia products. The device is especially relevant where low power, compactness, high-fidelity conversion, integrated headphone drive, and integrated stereo speaker drive are important design priorities. Designers must verify the exact pin assignments, supported audio rates, clocking scheme, speaker-load limits, analog biasing, and decoupling requirements against the manufacturer datasheet before layout. The 4.5 mm by 4.3 mm W-CSP also demands careful escape routing, acoustic inspection, and assembly-process control; trace geometry, component placement, and thermal or power-distribution planning can materially affect audio performance. This product record combines verified manufacturer and distributor information with package-level comparison, application guidance, and engineering-oriented design notes. It also distinguishes documented integrated features from unverified details, avoiding unsupported claims while helping engineers evaluate the WM8958ECS/R for portable audio designs.

RFQ پەیوەندی
WM8960CGEFL/RV Stereo Codec with 1W Drivers | Cirrus Logic
WM8960CGEFL/RV

WM8960CGEFL/RV Stereo Codec with 1W Drivers | Cirrus Logic

The Cirrus Logic WM8960CGEFL/RV is a stereo audio codec with integrated Class-D speaker drivers, headphone drivers, and a microphone interface, designed for portable digital audio applications. The device is identified as a 24-bit stereo audio interface in a 32-QFN package measuring 5 x 5 mm, and the verified manufacturer-related data states that it provides 1 W per channel into 8-ohm loads with a 5 V supply. Its combination of digital audio conversion, analog input, headphone output, and integrated speaker amplification allows portable equipment to use one compact audio subsystem instead of separate codec and amplifier packages. A stereo audio codec is an interface IC that converts digital audio data into analog signals and converts analog microphone or line-level inputs back into digital audio data. The WM8960CGEFL/RV belongs to the broader audio interface and power-management hierarchy: audio codec, mixed-signal interface IC, semiconductor, and portable-audio signal-chain component. Its integrated Class-D speaker drivers target compact speaker solutions where PCB area, component count, and low power are important. The headphone drivers support personal-audio outputs, while the microphone interface supports portable voice and communication functions. Verified source data identifies the part as a stereo CODEC with 1 W stereo Class-D speaker drivers and headphone drivers for portable audio applications. The supplied DigiKey result identifies it as a 24-bit stereo audio interface in a 32-QFN 5 x 5 mm package. The WM8960CGEFL/RV is therefore suited to portable audio systems where the digital host interface, analog audio paths, and speaker amplification must coexist in one package. The exact sample rate, voltage range, control interface, and full pin-level electrical limits are not included in the supplied verified data and must be confirmed from the manufacturer datasheet before design release. A key design consideration is analog and power-supply layout. Digital audio clocks and control signals should be kept away from sensitive microphone and headphone paths, while the integrated speaker outputs require careful return-current routing and adequate power delivery. Decoupling must follow the manufacturer’s recommended values and placement because the codec combines digital, analog, headphone, and Class-D output functions in one package. Designers should also verify speaker impedance, load current, thermal conditions, and supply sequencing against the official datasheet before connecting external transducers. Typical uses include portable media players, compact audio accessories, personal-audio products, voice-enabled devices, and small speaker systems. This page consolidates the verified distributor descriptions, package information, identified audio functions, source links, and engineering guidance; it does not substitute unavailable electrical details with assumptions.

RFQ پەیوەندی
WM8960CGEFL/V 24-Bit Stereo Codec with 1W Drivers
WM8960CGEFL/V

WM8960CGEFL/V 24-Bit Stereo Codec with 1W Drivers

The Cirrus Logic WM8960CGEFL/V is a 24-bit stereo audio codec with integrated 1 W Class D speaker drivers and headphone drivers, housed in a 32-pin QFN package measuring 5 mm by 5 mm. It is designed for portable digital-audio products that require microphone capture, digital-to-analog conversion, headphone output, and efficient speaker-drive capability in one compact device. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and analog sound into digital data. In the broader IC hierarchy, the WM8960 belongs to the audio-interface and codec family, combining an ADC, DAC, input and output routing, headphone amplification, and Class D speaker drivers within a single package. This integration can simplify portable-audio designs by reducing the number of separate analog and mixed-signal devices required on a circuit board. Key features include 24-bit audio resolution, stereo Class D output capable of 1 W per channel into 8 ohm loads at a 5 V supply, and dedicated headphone-driver support. The 5 mm by 5 mm QFN package has a 1.00 mm height and uses 32 terminals. Its operating temperature range extends from -40 °C to +85 °C, making it relevant to portable consumer equipment, mobile accessories, compact audio systems, and other space-constrained products. The device combines several signal paths in one package: digital audio interfaces, stereo conversion channels, analog inputs, headphone outputs, microphone amplification, and speaker-driver stages. Its integrated speaker capability is especially useful where a compact two-channel audio system is required without deploying separate discrete speaker amplifiers. Designers still need to select the correct digital interface mode, external filtering components, speaker loads, and decoupling network for the intended system. Typical applications include portable media players, headset and docking-station electronics, mobile-device accessories, portable radios, compact recording products, and battery-powered audio equipment. The integrated headphone and speaker outputs can shorten analog routing in designs where the codec must support both private listening and amplified stereo playback. Battery-operated systems also benefit from consolidating multiple audio functions into one package, although final power consumption depends on the selected mode and output loading. PCB implementation should prioritize short, quiet analog and digital-audio routes, solid ground-plane continuity, and placement of decoupling capacitors close to their associated supply pins. Speaker and headphone outputs require attention to EMI and output-noise coupling, while digital interface signals should remain separated from sensitive microphone and analog paths. Follow the manufacturer datasheet for the exact pin assignments, exposed-pad connection, recommended application circuit, and component values. This page organizes the verified device identity, package information, operating limits, sourcing details, cross-reference findings, and practical implementation guidance into a compact engineering reference. It also distinguishes documented drop-in options from broader functional alternatives so that PCB replacement decisions are based on actual compatibility rather than codec similarity alone.

RFQ پەیوەندی
WM8962BECSN/R - Stereo 24-Bit Audio Codec | Cirrus Logic
WM8962BECSN/R

WM8962BECSN/R - Stereo 24-Bit Audio Codec | Cirrus Logic

Cirrus Logic WM8962BECSN/R is a low-power stereo audio codec with 24-bit resolution, I2C and SPI control interfaces, and a 49-ball CSP package measuring 3.6 mm by 3.9 mm. It operates from a 1.7 V to 2.0 V supply and supports sampling rates from 8 kHz to 96 kHz, making it suitable for compact embedded audio systems. An audio codec is an interface IC that converts digital audio data into an analog output and converts analog microphone signals into digital PCM data. Within the semiconductor hierarchy, a stereo codec belongs to an audio interface IC, which is part of the broader integrated-circuit category. It is typically paired with an application processor, DSP, amplifier, microphone, speaker, and digital control interface. The WM8962B architecture integrates an ADC and stereo DAC for 24-bit audio processing. Its control interface supports I2C and SPI, allowing firmware to configure registers, mixer paths, and audio playback. The manufacturer product page also identifies an integrated charge pump, a dual-mode charge-pump architecture, and a DC servo. These features support ground-referenced headphone outputs and reduce the need for output DC-blocking capacitors. Integrated stereo Class-D speaker drive, microphone support, and audio-enhancement DSP expand the codec beyond basic signal conversion. The 24-bit processing path supports the full 8 kHz to 96 kHz sampling range, while the 1.7 V to 2.0 V analog supply range targets compact portable equipment. The manufacturer lists an operating temperature range of -40 °C to +85 °C for the exact ordered device. Typical uses include portable media players, mobile multimedia equipment, connected audio products, voice-capture terminals, and compact consumer appliances. Its small CSP footprint is useful where board area is constrained, while integrated headphone and speaker functions can reduce the number of external audio components. Firmware must still verify clocking, filter configuration, mixer routing, and output settings through the I2C or SPI interface. Layout should keep analog supply, ground, microphone, and headphone paths short, with suitable decoupling placed close to the device pins. Digital control traces should remain separated from sensitive analog nodes. The integrated charge pump and DC servo simplify headphone output topology, but external filtering, clock planning, and signal-integrity checks remain essential for low-noise performance. This product page combines the exact ordering information, operating limits, digital interfaces, package data, functional architecture, sourcing path, and engineering guidance for the WM8962BECSN/R. It also distinguishes the exact orderable suffix from the broader WM8962B family designation and identifies where additional board-level design work is required.

RFQ پەیوەندی
WM8962ECSN/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8962ECSN/R

WM8962ECSN/R - 24-Bit Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8962ECSN/R is a 24-bit stereo audio codec with I2C and SPI control interfaces, audio-enhancement DSP, and a 49-WLCSP package measuring 3.59 mm by 3.98 mm. It combines digital-to-analog and analog-to-digital conversion in a compact surface-mount package intended for audio processing and signal-chain designs. An audio codec is an interface IC that converts digital audio data into analog signals and analog sound signals into digital data. As a stereo codec, the WM8962ECSN/R handles two audio channels. Its 24-bit data resolution supports high-resolution audio architectures, while the integrated audio-enhancement DSP provides processing functions within the same device rather than requiring a separate external processor for supported use cases. The WM8962ECSN/R supports both I2C and SPI control buses, giving the host processor a choice of communication methods. I2C is useful in compact systems where pin count and wiring simplicity are priorities, while SPI can provide a different host-interface tradeoff when clocking and data-transfer characteristics suit the application. The exact register implementation, supported audio formats, and control sequence should be confirmed in the manufacturer datasheet. The physical package is a 49-WLCSP with a stated body size of 3.59 mm by 3.98 mm. Other manufacturer-listing data describes the package as PBGA49 or WCSP-49, approximately 3.60 mm by 3.90 mm, with 0.50 mm pitch, 0.70 mm height, MO-211C construction, and lead-free construction. These dimensions make the device suitable for compact portable and embedded audio products where board area is tightly constrained. Typical design environments include portable media devices, smart audio endpoints, headset and microphone signal chains, multimedia appliances, and embedded systems requiring stereo conversion. System-level success depends on correct analog input and output routing, suitable decoupling, clean power rails, an appropriately designed clock source, and layout that separates sensitive audio signals from digital switching activity. PCB implementation should follow the manufacturer land pattern and pin-assignment table exactly. Place input and output capacitors adjacent to their relevant device pins, provide a continuous ground reference, and keep high-speed digital clock and control routing away from microphone or line-level analog inputs. Validate the assembled design for channel crosstalk, idle-channel noise, clock jitter sensitivity, and start-up behavior. This product page consolidates the confirmed package, interface, resolution, and sourcing information while distinguishing documented facts from details that must be checked against the current manufacturer datasheet. It also identifies same-brand stereo-codec alternatives that require explicit pin, feature, and sample-rate validation before being treated as drop-in replacements.

RFQ پەیوەندی
WM8963ECSN/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8963ECSN/R

WM8963ECSN/R - 24-Bit Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8963ECSN/R is a 24-bit stereo audio interface and codec with I2C and SPI control, packaged as a 49-ball WLCSP measuring 3.59 mm by 3.98 mm. Its compact surface-mount format supports space-constrained audio products where the digital host interface, analog audio path, and physical footprint must coexist within a small board area. An audio codec is an interface IC that converts digital audio samples into analog signals and, depending on the implementation, supports analog signal conversion in the opposite direction. Within the broader semiconductor hierarchy, a codec belongs to the audio interface family, connects into the signal-processing and power-management portions of a system, and is controlled by a host processor through a serial bus. The WM8963ECSN/R combines that interface role with a stereo-audio focus and a 24-bit resolution identifier. The WM8963ECSN/R supports both I2C and SPI host-control interfaces, allowing a system architect to select the digital control method that best fits the processor, firmware, board-routing constraints, and peripheral configuration. Its 49-ball WLCSP is intended for high-density PCB assembly. The package dimensions are 3.59 mm by 3.98 mm, making physical design checks essential when placing the codec beside an application processor, memory, amplifier, connector, and microphone circuitry. The 49-ball package provides the physical interface for the codec's power, digital control, data, analog audio, and supporting functions. Because the complete pin-assignment and signal descriptions must match the exact ball numbering of this package, use the Cirrus Logic datasheet ball table when creating the symbol, assigning PCB nets, and checking exposed-ball or thermal requirements. Do not infer a ball function from the package name or from a diagram belonging to another package variant. Typical uses include portable audio equipment, smart speakers, voice-control products, headsets, soundbars, and compact embedded systems. The I2C option is particularly useful for low-pin-count control architectures, while SPI can suit systems that already use that bus for peripherals or require a different control timing strategy. The stereo codec can sit between a digital audio processor and an analog output stage, allowing host-generated audio to be converted for downstream amplification. PCB implementation should prioritize short analog and digital audio routes, continuous ground references, and placement of required bypass capacitors near the associated balls. Review the manufacturer reference circuit and pin table for the exact supply, interface, analog, and clock connections. Pay particular attention to exposed-ball requirements, board-cleanliness practices, and the relationship between power-entry points and sensitive audio nodes. This product record combines package identification, interface facts, application guidance, sourcing questions, and design checks in one concise reference. It also separates verified catalog attributes from detailed electrical parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate the WM8963ECSN/R before committing to a high-density PCB layout.

RFQ پەیوەندی
WM8974CGEFL/V - 24-Bit Mono Audio Codec | Cirrus Logic
WM8974CGEFL/V

WM8974CGEFL/V - 24-Bit Mono Audio Codec | Cirrus Logic

The Cirrus Logic WM8974CGEFL/V is a 24-bit mono audio codec with an integrated speaker driver, built-in phase-locked loop, and on-chip digital gain, packaged in a 24-pin QFN configuration with an exposed pad. The device is identified as a 4 mm by 4 mm surface-mount audio interface and is intended for compact systems requiring digital audio playback, microphone capture, and direct speaker-drive capability. An audio codec is a semiconductor interface that converts digital audio samples into analog signals, converts analog microphone signals into digital data, and often includes programmable gain, filtering, and output-driver functions. Within the wider hierarchy, the WM8974CGEFL/V belongs to the audio codec category, which is part of interface ICs and ultimately serves as a mixed-signal subsystem within a power-management and signal-processing architecture. Its integrated speaker driver can reduce the number of separate output components required in small audio systems. The WM8974CGEFL/V provides a 24-bit audio interface, digital gain control, an integrated phase-locked loop, and a mono speaker-driver stage. Its -40 °C to +85 °C operating-temperature range supports industrial and commercial equipment. The 24-QFN exposed-pad package also promotes heat transfer through the PCB copper area, although actual thermal performance depends on the layout, copper area, surrounding temperature, and audio-output load. Digital gain is particularly useful in systems where the software or system controller must adjust playback level without changing passive components. The built-in phase-locked loop supports systems in which the audio clock must be derived from or synchronized with another digital block. The mono codec architecture is suited to products such as alarm systems, industrial annunciators, compact voice terminals, and embedded audio modules that need one amplified audio path rather than a full stereo codec. Typical applications include industrial audible alarms, building-control panels, communication terminals, portable voice accessories, and embedded control systems with a local speaker. In these designs, the codec can accept digital audio from a host processor, provide programmable gain, and drive a loudspeaker through the integrated output stage. The exposed pad remains a functional part of the package and should be connected according to the manufacturer's recommended footprint and thermal layout. PCB design should preserve the recommended decoupling topology and keep analog and digital return currents controlled. Place input, output, and bypass capacitors close to their associated pins, connect the exposed pad to the intended ground or pad-design net, and maintain the manufacturer-specified footprint dimensions. Audio performance also depends on correct clocking, speaker loading, analog grounding, and separation from switching noise. This product record combines the exact package, temperature, interface, and feature information with practical design guidance, sourcing instructions, and an explicit drop-in compatibility assessment. The comparison focuses on true pin-to-pin replacements rather than broadly similar codecs that require a different footprint, pin assignment, clock arrangement, or power architecture.

RFQ پەیوەندی
WM8978CGEFL/V - 24-Bit Stereo Codec | Wolfson
WM8978CGEFL/V

WM8978CGEFL/V - 24-Bit Stereo Codec | Wolfson

The Wolfson Microelectronics plc WM8978CGEFL/V is a 24-bit stereo audio codec with an integrated speaker driver, digital I2S/PCM interfaces, and analog microphone, headphone, and line-output stages in a 32-QFN 5 x 5 mm package. It combines several signal-path functions commonly required in portable multimedia equipment, reducing the need for separate microphone, headphone, and speaker amplifiers. A stereo audio codec is a mixed-signal interface IC that converts digital audio samples into analog signals and accepts analog microphone signals before converting them back into digital audio. In the broader device hierarchy, the WM8978 belongs to the audio codec category, integrates into interface ICs, and ultimately supports portable audio systems such as multimedia phones, digital still cameras, and digital camcorders. The WM8978CGEFL/V integrates preamplifiers for stereo differential microphones and includes drivers for speakers, headphones, and differential or stereo line outputs. Its published interface format is 24-bit I2S/PCM, while its 32-QFN package measures 5 x 5 mm. This integration can shorten analog routing, reduce external amplifier count, and simplify portable-product layouts when the board area and power budget are tightly constrained. Its mixed-signal architecture supports a compact portable audio signal chain. Digital audio enters through the I2S or PCM interface, while the codec manages microphone capture and analog playback paths. The 5 x 5 mm QFN-32 package requires careful PCB layout because its exposed thermal pad and fine-pitch perimeter connections affect soldering, return paths, and heat spreading. Exact electrical ratings, sampling rates, clock requirements, and output-power limits must be confirmed from the manufacturer datasheet before layout release. Typical uses include portable media players, multimedia phones, digital cameras, camcorders, and compact audio accessories. It may also fit smart-home or embedded devices that need one IC for digital-to-analog playback, microphone capture, headphone output, and speaker drive. Designers should confirm that the selected speaker, microphone, and output network remain within the device's electrical and acoustic limits. A key design consideration is analog layout discipline. Place input and output capacitors near their associated pins, maintain short and symmetric analog routes, keep switching-supply and digital-clock nodes away from microphone inputs, and follow the datasheet reference layout for component selection and exposed-pad connection. Confirm the exact schematic values and pin definitions before production release. This product page combines the WM8978CGEFL/V interface and package details, replacement considerations, application guidance, comparison parameters, and practical layout notes to support faster component selection and hardware design.

RFQ پەیوەندی
WM8983GEFL/RV - Stereo 24-Bit Audio Codec | Cirrus Logic
WM8983GEFL/RV

WM8983GEFL/RV - Stereo 24-Bit Audio Codec | Cirrus Logic

The Cirrus Logic WM8983GEFL/RV is a stereo mobile multimedia audio codec with 24-bit I2S and PCM interfaces, two ADC channels, two DAC channels, and an integrated 1 W speaker driver. It is packaged in a 32-pin QFN package measuring 5 mm by 5 mm. The combination of stereo conversion, digital audio interfaces, and direct speaker-drive capability makes the device suitable for portable equipment in which a separate speaker amplifier would increase board area and system complexity. An audio codec is an interface IC that converts analog audio signals into digital data and digital audio data back into analog signals. In a portable multimedia system, the WM8983GEFL/RV can sit between microphones or line-level audio inputs and an I2S or PCM-capable processor. Its speaker-drive capability can then provide an efficient output path for a small speaker or headphone-oriented audio subsystem. The WM8983GEFL/RV provides 24-bit audio resolution, stereo ADC and DAC channels, I2S and PCM data formats, and a 1 W speaker-driver stage. These features support modern digital audio processors while keeping the external component count relatively low. The 5 mm by 5 mm 32-QFN package also supports compact board layouts, although its exposed thermal pad and fine-pitch footprint require careful PCB layout and assembly planning. The device is described as a low-power, high-quality stereo codec intended for portable multimedia applications. Its integrated speaker driver reduces the need for a separate output amplifier in suitable low-power designs. Designers should still verify the speaker impedance, output waveform, thermal conditions, and supply configuration against the manufacturer datasheet before establishing a production design. Typical uses include portable media players, personal audio products, compact consumer electronics, mobile accessories, and embedded multimedia terminals. The I2S interface suits processors with a dedicated digital-audio peripheral, while PCM support offers an additional digital connection format. These interfaces allow captured or generated audio to be transferred digitally without external high-speed converters. The 32-QFN footprint requires attention to pad layout, exposed-pad soldering, and via placement. Keep analog input, headphone, and speaker outputs away from clock and data routing where practical, and follow the manufacturer’s recommended decoupling and grounding arrangement. Digital interfaces should be driven only when signal levels and timing comply with the device’s electrical limits. This page consolidates the available interface, resolution, channel-count, package, and speaker-drive information, adds practical application guidance, and identifies the limits of a replacement decision. Pin-level design work should use the manufacturer datasheet pin description and application information rather than inferring connectivity from the package outline.

RFQ پەیوەندی
WM8983GEFL/V - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8983GEFL/V

WM8983GEFL/V - 24-Bit Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8983GEFL/V is a low-power, high-quality stereo audio codec designed for portable multimedia equipment. It combines two 24-bit ADCs, two 24-bit DACs, digital audio interfaces for I2S and PCM data, analog input and output mixing, and a 1 W mono speaker driver in a 32-QFN (5x5 mm) surface-mount package. A multimedia CODEC is a mixed-signal semiconductor that converts between digital audio streams and analog microphone, headphone, line, or speaker signals. Its functional hierarchy places the WM8983 among audio interface ICs, within audio codecs and ultimately the broader category of interface ICs. Integrating conversion, analog mixing, and speaker amplification reduces the number of discrete components required in portable audio designs. The WM8983 provides 24-bit stereo ADCs and 24-bit stereo DACs, with I2S and PCM digital interfaces for connection to a host processor or digital audio bus. Its flexible analog mixing block supports combined playback and voice communication paths. The integrated 1 W speaker drive output allows the codec to drive a small loudspeaker directly, making it useful where a separate headphone amplifier is not required. The device is supplied in a compact 32-QFN (5x5 mm) package suited to space-constrained handsets, portable media players, personal audio products, and embedded multimedia systems. Its low-power design targets battery-operated equipment where converter efficiency, standby behavior, and analog signal integrity influence both system heat and playback quality. Typical uses include portable music players, mobile media devices, voice-capable portable electronics, compact speakers, and multifunction personal-audio products. The stereo recording path can capture analog microphone or line-level inputs, while the DAC path and analog mixer provide digital playback, voice monitoring, and direct speaker output within one device. When laying out a WM8983GEFL/V board, place decoupling capacitors at the supply pins and route analog and digital return currents carefully to prevent codec noise from coupling into microphone or speaker signals. Confirm the exact clocking, digital-interface mode, and exposed-pad connection against the manufacturer datasheet before release. This page organizes the confirmed WM8983GEFL/V capabilities, package information, sourcing path, and engineering trade-offs for engineers evaluating stereo audio codec implementations. It also distinguishes the documented order-code variants and identifies where a genuine pin-to-pin substitute must be validated rather than assumed.

RFQ پەیوەندی
WM8985CGEFL Stereo Audio Codec | Cirrus Logic | 32-QFN
WM8985CGEFL

WM8985CGEFL Stereo Audio Codec | Cirrus Logic | 32-QFN

The Cirrus Logic WM8985CGEFL is a stereo audio interface and multimedia codec with 24-bit I2S and PCM digital audio support. It is packaged in a 32-QFN (5x5 mm) surface-mount package and is associated with Class D headphone-driver functionality. The part is intended for compact embedded audio systems where a single codec must handle digital audio interfaces, analog audio conversion, and headphone-output support. A multimedia codec is an integrated audio interface IC that converts between digital audio streams and analog audio signals while providing control and signal-conditioning functions for speakers, headphones, microphones, and line-level circuitry. The WM8985CGEFL sits within the broader hierarchy of audio codec, audio interface IC, multimedia IC, and semiconductor. The WM8985CGEFL is identified in distributor listings as a stereo audio interface supporting 24-bit I2S and PCM formats. Its 32-QFN (5x5 mm) package supports high-density PCB layouts and is suitable for portable equipment, consumer audio products, communications equipment, and embedded audio platforms. The listing also identifies Class D headphone-driver support as a key feature for applications requiring efficient headphone amplification. The 5x5 mm QFN format can help reduce board area compared with larger leaded packages, but exposed-pad thermal management and careful PCB layout remain important. Decoupling capacitors should be placed close to the device power pins, while analog and digital ground and power connections should follow the manufacturer pin-description and layout guidance. Signal-routing decisions should also account for the 24-bit audio path and the separation of analog and digital sections. Typical uses include USB and embedded audio accessories, portable media equipment, communications terminals, smart-device audio paths, and compact headphone interfaces. A system designer should confirm the complete electrical limits, clocking requirements, supported sample rates, analog input/output limits, and pin-level connections against the manufacturer datasheet before releasing a PCB. This product page consolidates the exact WM8985CGEFL package and interface information into a structured component record. It also identifies the intended codec use cases and distinguishes the documented part from unsupported substitute claims. When replacing an existing WM8985CGEFL, verify the complete 32-pin land pattern, exposed-pad connection, digital audio format, clock configuration, analog biasing, and supply sequencing rather than relying on the codec function alone. A functionally similar audio codec is not automatically a pin-to-pin drop-in replacement.

RFQ پەیوەندی
WM8985CGEFL/R Stereo Audio Codec | Cirrus Logic | 32-QFN (Tape & Reel)
WM8985CGEFL/R

WM8985CGEFL/R Stereo Audio Codec | Cirrus Logic | 32-QFN (Tape & Reel)

The Cirrus Logic WM8985CGEFL/R is a stereo audio interface and multimedia codec with 24-bit I2S and PCM digital audio support. It is packaged in a 32-QFN (5x5 mm) surface-mount package and is associated with Class D headphone-driver functionality. The part is intended for compact embedded audio systems where a single codec must handle digital audio interfaces, analog audio conversion, and headphone-output support. A multimedia codec is an integrated audio interface IC that converts between digital audio streams and analog audio signals while providing control and signal-conditioning functions for speakers, headphones, microphones, and line-level circuitry. The WM8985CGEFL/R sits within the broader hierarchy of audio codec, audio interface IC, multimedia IC, and semiconductor. The WM8985CGEFL/R is identified in distributor listings as a stereo audio interface supporting 24-bit I2S and PCM formats. Its 32-QFN (5x5 mm) package supports high-density PCB layouts and is suitable for portable equipment, consumer audio products, communications equipment, and embedded audio platforms. The listing also identifies Class D headphone-driver support as a key feature for applications requiring efficient headphone amplification. The 5x5 mm QFN format can help reduce board area compared with larger leaded packages, but exposed-pad thermal management and careful PCB layout remain important. Decoupling capacitors should be placed close to the device power pins, while analog and digital ground and power connections should follow the manufacturer pin-description and layout guidance. Signal-routing decisions should also account for the 24-bit audio path and the separation of analog and digital sections. Typical uses include USB and embedded audio accessories, portable media equipment, communications terminals, smart-device audio paths, and compact headphone interfaces. A system designer should confirm the complete electrical limits, clocking requirements, supported sample rates, analog input/output limits, and pin-level connections against the manufacturer datasheet before releasing a PCB. This product page consolidates the exact WM8985CGEFL/R package and interface information into a structured component record. It also identifies the intended codec use cases and distinguishes the documented part from unsupported substitute claims. When replacing an existing WM8985CGEFL/R, verify the complete 32-pin land pattern, exposed-pad connection, digital audio format, clock configuration, analog biasing, and supply sequencing rather than relying on the codec function alone. A functionally similar audio codec is not automatically a pin-to-pin drop-in replacement.

RFQ پەیوەندی
WM8988LGECN/V - Stereo 24-Bit Audio Codec | Cirrus Logic
WM8988LGECN/V

WM8988LGECN/V - Stereo 24-Bit Audio Codec | Cirrus Logic

The Cirrus Logic WM8988LGECN/V is a low-power stereo audio codec with a 24-bit interface, synchronous operation, and CMOS technology in a 28-pin QFN package measuring 4 mm by 4 mm. Designed for portable audio equipment, it combines stereo signal processing and digital audio interfacing in a compact surface-mount package rated for -25°C to +85°C operation. An audio codec is an interface IC that converts digital audio data into an analog audio signal, converts analog audio back into digital data, or performs both functions. In the broader hierarchy, a codec belongs to the audio interface family, then to interface ICs, and finally to integrated circuits. Stereo codecs support two audio channels and are commonly used where a system needs headphone, microphone, line, or speaker-path processing without a large discrete analog implementation. The WM8988LGECN/V is identified as a 24-bit stereo audio interface with low-power operation. Its synchronous CMOS implementation provides a defined digital interface for portable audio systems. The 28-QFN package also reduces board footprint compared with larger leaded or high-pin-count packages, making the device suitable for space-constrained consumer and portable products. The part operates over a -25°C to +85°C temperature range and uses a 4 mm by 4 mm QFN package with 28 terminals. Its operating architecture is described as synchronous, which helps coordinate digital audio transfer with the associated system clock and data signals. The package and temperature specification support applications that require a compact, surface-mount audio interface rather than a through-hole codec solution. Typical applications include portable music players, headphone-equipped personal audio products, connected audio accessories, and compact consumer systems requiring stereo playback or recording. The 24-bit interface and low-power design are especially relevant when product designers need audio conversion performance while preserving board area and system power budget. PCB implementation should follow the manufacturer datasheet for exposed-pad connection, decoupling, clock routing, and analog layout. A QFN package also requires careful assembly inspection because its fine-pitch leads and exposed thermal pad are difficult to inspect visually after soldering. Confirm pin assignments and recommended component values against the manufacturer datasheet before releasing the layout.

RFQ پەیوەندی
WM8993ECS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8993ECS/RV

WM8993ECS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8993ECS/RV is a 24-bit stereo audio interface IC with two ADCs, two DACs, sigma-delta conversion, a stereo speaker driver, and a Class W headphone driver. The device is supplied in a 48-terminal WLCSP package measuring 3.65 mm by 3.55 mm, making it suitable for compact portable audio equipment. Its nominal supply voltage is 1.2 V, and its specified operating temperature range extends from -40°C to 85°C. An audio codec is an interface IC that converts analog audio signals into digital data and reconstructs digital audio into analog signals. As part of the broader hierarchy of audio interface ICs, codecs connect microphones, speakers, headphones, and other analog audio hardware to a digital audio processor. Their conversion architecture, signal-to-noise performance, integrated analog drivers, package size, and power requirements determine how effectively they fit portable and embedded systems. The WM8993ECS/RV combines a 24-bit resolution with two ADCs and two DACs in a single device. Listed ADC and DAC signal-to-noise ratios are 95 dB and 100 dB, respectively. Sigma-delta conversion supports high-resolution digital audio processing, while the integrated stereo speaker and Class W headphone drive functions reduce the need for separate output-driver circuitry in suitable speaker and headphone loads. The WM8993ECS/RV belongs to the Wolfson audio-hub family associated with Cirrus Logic. Its integration is valuable in space-constrained systems because analog capture, digital playback, and headphone or speaker drive functions are consolidated within one 3.65 mm by 3.55 mm package. Exact clocking, supported sample rates, analog input configuration, output-power ratings, and control-interface details must be confirmed against the manufacturer datasheet before schematic capture. Typical uses include smartphone and tablet audio, portable media players, Bluetooth audio accessories, headset electronics, compact voice-capture equipment, and connected audio products. The low-profile WLCSP footprint supports high-density PCB construction, while the integrated drivers can simplify signal routing compared with a discrete codec-and-amplifier implementation. Designers should verify the supported microphone and line-input topology, required external passive components, digital interface voltage levels, clock sources, and thermal performance for the selected speaker impedance. The package also requires careful PCB layout with short analog paths and appropriate grounding to preserve signal integrity in compact systems. This product page combines the manufacturer-part characteristics, converter configuration, package details, application guidance, and verified sourcing links into one engineering-focused reference. It also distinguishes directly documented attributes from parameters that must be confirmed during component selection and hardware validation.

RFQ پەیوەندی