بەرهەمەکان (190+)

CS4220-KSR - 24-Bit Stereo Audio Codec | Cirrus Logic
CS4220-KSR

CS4220-KSR - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4220-KSR is a 24-bit stereo audio codec with simultaneous analog-to-digital and digital-to-analog conversion, delta-sigma converter technology, a 4.75 V to 5.25 V analog supply range, and an SSOP-28 package. The codec supports sample rates from 4 kHz to 50 kHz, digital I2S audio interfaces, and an operating temperature range of -10°C to +70°C. An audio codec is an interface IC that converts between analog audio signals and a digital audio bus. In signal-chain terms, the stereo ADC section accepts left- and right-channel analog inputs, while the stereo DAC section reconstructs digital audio as analog outputs. Within the broader hierarchy, the CS4220 is an audio codec, an interface IC, and a semiconductor designed for digital audio equipment. The CS4220 integrates stereo 24-bit conversion on both sides of the signal path, reducing the need for separate converters in audio systems. Its 104 dB signal-to-noise figure supports professional and high-fidelity equipment, while operation up to 192 kHz accommodates high-resolution playback and recording formats. Digital I2S connectivity provides a conventional interface for digital audio processors, converters, and playback systems. The device uses delta-sigma conversion to encode analog audio into a digital bitstream and to reconstruct that signal in the DAC section. Digital filtering, decimation, interpolation, clocking, and audio data transfer are integrated into one device. Mute control and master-slave clock negotiation add practical system controls for managing analog outputs and establishing clock relationships between audio components. Typical uses include professional digital audio equipment, multimedia consoles, recording interfaces, digital mixers, broadcast audio subsystems, and high-fidelity playback products. The dual converter topology is especially useful when a design needs both analog capture and playback without implementing two separate converter packages. Designers should also account for analog ground, digital ground, and clock-routing requirements around the codec. Use the manufacturer pin-description table to assign every SSOP-28 signal and preserve the recommended input, output, reference, power, and decoupling connections. Keep analog and digital return paths separated where the datasheet requires it, and validate the master clock and I2S timing against the selected system sample rate before releasing a PCB. This page combines the CS4220-KSR technical profile, application guidance, interface considerations, and verified sourcing information in a format intended to accelerate component selection, schematic review, and PCB planning for 24-bit stereo audio systems.

RFQ پەیوەندی
CS4221-KS - 24-Bit Stereo Audio Codec | Cirrus Logic
CS4221-KS

CS4221-KS - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4221-KS is a 24-bit stereo audio codec with a 3 V interface, integrating stereo analog-to-digital and stereo digital-to-analog converters in a 28-pin SSOP package. The device supports audio sampling up to 50 kHz according to distributor product data and uses delta-sigma conversion techniques for both converter directions. Its serial interface and mixed-signal codec architecture are intended to reduce the component count in digital audio equipment. An audio codec is an interface IC that converts analog audio signals into digital data and digital audio data back into analog signals. Within the broader semiconductor hierarchy, a codec belongs to the audio interface and signal-conversion class of integrated circuits. The CS4221-KS therefore serves as the bridge between an external digital audio processor or controller and external analog input and output circuitry, rather than functioning as a complete audio playback system by itself. The principal verified features include 24-bit resolution, simultaneous stereo ADC and DAC functionality, a 3 V interface, serial digital connectivity, and a maximum stated sampling frequency of 50 kHz. These attributes suit equipment requiring compact digital-audio conversion at a conventional CD-oriented sample rate. The integrated stereo topology also helps minimize the number of external converter channels required in a stereo design, although the application still needs suitable input and output analog circuitry. The CS4220 and CS4221 family uses delta-sigma conversion, according to the manufacturer datasheet summary reproduced by the verified search results. Delta-sigma conversion shapes quantization noise into a digitally filtered form, supporting the device's stated 24-bit resolution. The available verified snippets do not expose the internal architecture, clock requirements, analog performance metrics, or digital interface mode in sufficient detail to characterize the converter further without unsupported assumptions. Typical uses include professional and consumer stereo audio equipment, digital mixing equipment, sound-card circuitry, multimedia appliances, and embedded audio systems that require both record and playback channels. The same 50 kHz limitation that makes the codec suitable for conventional stereo audio applications also makes it less appropriate for designs needing higher-rate professional audio, unless the complete system requirements are limited to 50 kHz. When laying out a CS4221-KS design, analog signal routing should be kept separate from digital clock and serial-data paths, and the power, ground, and bypass connections must follow the manufacturer's recommended application circuit. Because the supplied verified data does not include a complete pin table or decoupling values, engineers should verify pin assignments and recommended passive values against the official Cirrus Logic datasheet before release to production. This page consolidates the verified distributor specifications, package information, lifecycle observations, source links, selection guidance, and engineering considerations for CS4221-KS. It also distinguishes confirmed characteristics from parameters that require direct confirmation from the manufacturer datasheet, helping procurement and design teams avoid treating incomplete distributor metadata as a complete electrical specification.

RFQ پەیوەندی
CS4222-BS - 20-Bit Stereo Audio Codec | Cirrus Logic
CS4222-BS

CS4222-BS - 20-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4222-BS is a 20-bit stereo audio codec with volume control, integrating stereo analog-to-digital and stereo digital-to-analog converters in a 28-pin SSOP package. The device operates from a single +5 V supply and uses delta-sigma conversion techniques for its stereo conversion paths. These core characteristics make the CS4222-BS a monolithic audio interface IC for systems that require both digital-to-analog playback and analog-to-digital recording functions. An audio codec is a mixed-signal semiconductor that converts audio between digital data and analog voltage signals. Within the broader integrated-circuit hierarchy, a codec belongs to the interface and audio-converter class, combining an ADC, DAC, volume control, and associated analog circuitry in one device. The CS4222 family therefore reduces the number of separate converters required in a stereo audio system while simplifying synchronization and analog-output implementation. The verified manufacturer information identifies a 20-bit resolution, four-channel audio configuration, delta-sigma conversion architecture, and single +5 V operation. Its on-chip output buffer produces differential line-level outputs for the left and right channels. The documented nominal output is 2.83 Vpp, or 1 Vrms, for each single-ended output at full-scale digital input, with a 2.3 V common-mode voltage. The corresponding differential signal is 5.66 Vpp, or 2 Vrms). The CS4222-BS also incorporates volume control, allowing playback amplitude to be adjusted within the codec rather than solely through external analog gain stages. This integration can simplify system architecture, but the exact control interface, supported audio data formats, converter performance, clock requirements, and recommended external networks must be confirmed from the manufacturer datasheet before layout or firmware development. Those detailed values are not present in the supplied verified extracts and are therefore not inferred here. Typical implementation roles include legacy stereo multimedia systems, audio capture and playback modules, digital mixing equipment, and embedded audio subsystems requiring separate transmit and receive paths. In such equipment, the codec can accept digital audio at its ADC input and provide amplified analog left and right outputs for external coupling, headphone, or line-stage circuitry. Its differential outputs may offer better rejection of common-mode noise than single-ended outputs when paired with a balanced receiver. A critical design consideration is that the codec cannot be evaluated from resolution alone. Designers should verify the complete interface protocol, sample-rate range, clocking scheme, analog input range, output-load capability, power sequencing, and external component recommendations in the manufacturer datasheet. The documented 10 kΩ output loading must also be respected because heavier loads can alter output level and distortion even if the nominal operating voltage remains correct. This product page consolidates verified CS4222-BS specifications, distributor availability references, package information, and engineering guidance into one searchable source. It also separates documented data from unresolved parameters, helping engineers avoid unsupported assumptions while evaluating this audio codec for a new or legacy PCB design.

RFQ پەیوەندی
CS4222-DS - 20-Bit Stereo Audio Codec | Cirrus Logic
CS4222-DS

CS4222-DS - 20-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4222-DS is a 20-bit stereo audio codec with volume control, integrating analog-to-digital and digital-to-analog conversion in a 28-pin SSOP package. The device operates from a single +5 V supply and supports four-channel volume control according to the DigiKey product listing. Its delta-sigma conversion architecture, onboard output buffering, and differential line-level outputs make it suitable for multichannel consumer audio, sound-card, mixer, and digital-audio-interface equipment. An audio codec is an interface IC that converts analog sound into a digital bitstream and reconstructs digital audio into analog signals. In the broader semiconductor hierarchy, a codec belongs to interface ICs and audio codecs, combining mixed-signal converters with digital control and analog output circuitry. The CS4222 therefore provides both signal conversion and system-level volume management rather than operating only as a conventional digital interface controller. The CS4222 provides 20-bit stereo conversion and uses delta-sigma conversion techniques. Its on-chip buffer amplifier generates differential outputs capable of driving 10 kW loads, as stated in the CS4222 datasheet. Each output produces a nominal 2.83 Vpp, or 1 Vrms, signal for a full-scale digital input. The common-mode voltage is 2.3 V, and the two sides of each differential channel can represent a 5.66 Vpp, or 2 Vrms, differential signal. The single-supply architecture simplifies analog system design around a conventional +5 V rail. Digital control and analog conversion are consolidated in one IC, reducing the number of separate converters required in a stereo design. The integrated volume-control function can simplify control layout in systems that need programmable attenuation between digital sources and line-level outputs, although software control details and supported register values must be confirmed in the manufacturer datasheet before implementation. Typical uses include stereo sound cards, compact multimedia systems, powered speakers, home-audio preamplifiers, mixer inputs, USB or FireWire audio interfaces, and industrial monitoring equipment. The differential outputs are particularly useful when the downstream analog stage benefits from common-mode rejection and reduced susceptibility to ground-borne noise. Board-level filtering and grounding remain important because digital activity from the codec can couple into sensitive analog paths if the layout does not separate converter and output-current return paths. Designers should follow the recommended external component network shown in the Cirrus Logic CS4222 datasheet and preserve the differential output topology. Input and output decoupling should be placed close to the appropriate supply and signal pins, while analog and digital return currents should be routed carefully on mixed-signal boards. The 28-pin SSOP footprint is not interchangeable with leaded or differently pin-counted codecs without a PCB redesign. This product page consolidates verified distributor pricing, package information, converter performance, application guidance, and sourcing data. It also distinguishes verified CS4222-DS facts from parameters that still require confirmation, avoiding unsupported claims about equivalent codecs, exact pin functions, lifecycle guarantees, or unreported electrical limits.

RFQ پەیوەندی
CS4222-DSZ - 20-Bit Stereo Codec | Cirrus Logic | 4-Channel
CS4222-DSZ

CS4222-DSZ - 20-Bit Stereo Codec | Cirrus Logic | 4-Channel

Cirrus Logic CS4222-DSZ is a 20-bit stereo audio codec with four channels, integrated stereo analog-to-digital and stereo digital-to-analog converters, and a single +5 V power supply. The device uses delta-sigma conversion techniques and is housed in a 28-pin SSOP package. Its four-channel architecture supports simultaneous stereo ADC and DAC functions, while its audio volume control simplifies level management in mixed-signal audio equipment. An audio codec is a mixed-signal interface IC that converts audio between analog and digital representations. In the signal hierarchy, a codec combines an ADC, DAC, volume control, and associated interface functions into one device. The CS4222-DSZ belongs to the audio codec category within interface ICs, providing a compact bridge between analog audio circuitry and a digital audio system. The CS4222-DSZ provides 20-bit stereo conversion, two analog input channels, two analog output channels, and integrated volume control. It operates from a single +5 V supply, which can simplify analog power planning in equipment that does not use a negative analog rail. Delta-sigma conversion supports digital filtering of quantization noise, helping place the codec between source circuitry and downstream audio processing. As a four-channel part, the CS4222-DSZ can support a stereo playback and recording architecture. The integrated volume-control function can reduce the number of separate analog gain stages required in basic audio paths. Its interface and control details should be checked in the manufacturer datasheet before fixing clock, format, register, and digital-interface settings on the PCB. Typical uses include professional and consumer audio interfaces, multimedia equipment, sound cards, digital mixing equipment, and embedded audio systems. The single +5 V architecture is particularly useful where analog circuitry already operates around that rail. Systems requiring a different power plan may prefer another codec with matching supply and interface requirements. PCB design should preserve short, controlled analog paths and provide the decoupling and layout shown in the manufacturer datasheet. Keep analog input and output routing away from high-speed digital signals, use a continuous ground reference plane, and place bypass capacitors close to their supply pins. Confirm pin assignments and exposed connections before routing because the public product listing does not reproduce the complete pin-description table. This page organizes the verified product identity, package, converter architecture, sourcing data, engineering guidance, and confirmed cross-reference candidate for engineers evaluating the CS4222-DSZ. A qualified replacement should be checked against pinout, supply voltage, audio format, clocking, control registers, performance, and lifecycle requirements before PCB release.

RFQ پەیوەندی
CS4223-BS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic
CS4223-BS

CS4223-BS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic

The Cirrus Logic CS4223-BS is a 24-bit, 105 dB dynamic-range stereo audio codec with integrated analog-to-digital and digital-to-analog converters, operating from a single +5 V supply in a 28-pin SSOP package. The converter uses delta-sigma conversion techniques, and the CS4223-BS configuration is identified by distributor data as a stereo codec without volume control. An audio codec is an interface IC that converts analog sound signals into digital data and reconstructs digital audio into analog signals. A codec belongs to the broader interface IC and signal-conversion hierarchy, combining an ADC, DAC, digital audio interface, clocking, and associated analog support functions. This integration reduces the number of external converters required in CD players, DVD systems, automotive audio equipment, consumer electronics, and other stereo-audio systems. Key features include 24-bit audio resolution, a specified signal-to-noise ratio of 105 dB, stereo ADC and DAC channels, delta-sigma conversion, and single +5 V operation. The 105 dB rating provides a concrete measure of the converter noise floor relative to the full-scale signal, while 24-bit words provide sufficient numerical resolution for professional and consumer audio paths. The 28-pin SSOP surface-mount package supports compact, board-level implementations. The device accepts digital audio through its serial audio interface and uses external clocking and synchronization signals for deterministic conversion. Delta-sigma architectures reduce the need for high-precision conversion components inside the signal path, although board layout, grounding, supply decoupling, and clock signal integrity remain important. Analog and digital sections should be routed to minimize coupling from switching nodes and high-current return paths. Typical applications include stereo CD and DVD audio, home-theater equipment, automotive sound systems, digital mixing consoles, multimedia appliances, and other systems requiring simultaneous analog-to-digital and digital-to-analog conversion. The CS4223-BS is appropriate where a 24-bit stereo codec and 105 dB dynamic range are required from one +5 V supply. Because the verified listing identifies this -BS option as lacking volume control, systems requiring an internal volume-control function should verify that requirement before design-in. For a new PCB, place all decoupling capacitors close to their supply pins, use a low-inductance ground reference, and route clock and data traces away from analog inputs. The +5 V rail should be filtered if nearby switching converters create ripple or high-frequency noise. Legacy-product risk should also be evaluated because the available cross-reference data labels the CS4223 family as obsolete and recommends consulting manufacturer lifecycle information before committing to a production run.

RFQ پەیوەندی
CS4223-KS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic
CS4223-KS

CS4223-KS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4223-KS is a 24-bit, 105 dB stereo audio codec with integrated analog-to-digital and digital-to-analog converters, supplied in a 28-pin SSOP package. The device uses delta-sigma conversion, operates from a single +5 V power supply, and provides a 24-bit serial audio interface. It combines bidirectional stereo audio conversion in one package, reducing the number of separate converters required in a digital audio system. An audio codec is an interface integrated circuit that converts between analog audio signals and digital audio data. The CS4223 belongs to the broader codec hierarchy, which includes digital-to-analog converters, analog-to-digital converters, audio interface ICs, and signal-conversion semiconductors. In this device, stereo delta-sigma ADC and DAC sections share the same integrated package and serial digital audio connection. The primary verified performance features are 24-bit resolution, 105 dB dynamic range, stereo conversion, a 24-bit serial interface, operation from one +5 V supply, and low power consumption. These characteristics suit professional audio equipment, multichannel sound systems, consumer audio electronics, industrial monitoring, and embedded audio platforms where analog audio must be captured or reproduced using a digital signal path. The CS4223/4 family uses delta-sigma conversion techniques, allowing analog stereo signals and digital audio data to share a compact mixed-signal package. The CS4223-KS distributor description identifies this specific option as a 24-bit audio codec without volume control. That distinction is important because volume-control functionality must be verified in the manufacturer documentation before assuming equivalent behavior between CS4223 and CS4224 variants. Typical circuit roles include receiving digital audio data for conversion to stereo analog outputs and accepting stereo analog inputs for conversion to digital data. System designers must provide suitable input and output filtering, stable analog supply and ground distribution, correct serial-interface timing, and signal routing appropriate to the codec's application. The single +5 V supply simplifies rail planning, although analog and digital return-current paths still require careful PCB partitioning. Before layout, compare the exact CS4223-KS pinout and electrical limits against the selected schematic revision. The public search results identify the package as 28-pin SSOP, but they do not provide a complete verified pin table in the supplied data; no pin names are therefore inferred here. Likewise, sample rate, clock range, analog input and output range, and recommended external component values require confirmation in the manufacturer datasheet. This product page consolidates the verified distributor descriptions, manufacturer-family data, package information, and practical selection considerations for the CS4223-KS. It separates confirmed specifications from unavailable parameters and focuses comparison on genuine same-package family options rather than presenting unrelated codecs as drop-in replacements.

RFQ پەیوەندی
CS4223-KSR - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic (Tape & Reel)
CS4223-KSR

CS4223-KSR - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic (Tape & Reel)

Cirrus Logic CS4223-KSR is a 24-bit, 105 dB stereo audio codec with integrated analog-to-digital and digital-to-analog converters, supplied in a 28-pin SSOP package. The device uses delta-sigma conversion, operates from a single +5 V power supply, and provides a 24-bit serial audio interface. It combines bidirectional stereo audio conversion in one package, reducing the number of separate converters required in a digital audio system. An audio codec is an interface integrated circuit that converts between analog audio signals and digital audio data. The CS4223 belongs to the broader codec hierarchy, which includes digital-to-analog converters, analog-to-digital converters, audio interface ICs, and signal-conversion semiconductors. In this device, stereo delta-sigma ADC and DAC sections share the same integrated package and serial digital audio connection. The primary verified performance features are 24-bit resolution, 105 dB dynamic range, stereo conversion, a 24-bit serial interface, operation from one +5 V supply, and low power consumption. These characteristics suit professional audio equipment, multichannel sound systems, consumer audio electronics, industrial monitoring, and embedded audio platforms where analog audio must be captured or reproduced using a digital signal path. The CS4223/4 family uses delta-sigma conversion techniques, allowing analog stereo signals and digital audio data to share a compact mixed-signal package. The CS4223-KSR distributor description identifies this specific option as a 24-bit audio codec without volume control. That distinction is important because volume-control functionality must be verified in the manufacturer documentation before assuming equivalent behavior between CS4223 and CS4224 variants. Typical circuit roles include receiving digital audio data for conversion to stereo analog outputs and accepting stereo analog inputs for conversion to digital data. System designers must provide suitable input and output filtering, stable analog supply and ground distribution, correct serial-interface timing, and signal routing appropriate to the codec's application. The single +5 V supply simplifies rail planning, although analog and digital return-current paths still require careful PCB partitioning. Before layout, compare the exact CS4223-KSR pinout and electrical limits against the selected schematic revision. The public search results identify the package as 28-pin SSOP, but they do not provide a complete verified pin table in the supplied data; no pin names are therefore inferred here. Likewise, sample rate, clock range, analog input and output range, and recommended external component values require confirmation in the manufacturer datasheet. This product page consolidates the verified distributor descriptions, manufacturer-family data, package information, and practical selection considerations for the CS4223-KSR. It separates confirmed specifications from unavailable parameters and focuses comparison on genuine same-package family options rather than presenting unrelated codecs as drop-in replacements.

RFQ پەیوەندی
CS4224-BS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic
CS4224-BS

CS4224-BS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4224-BS is a 24-bit, 105 dB stereo audio codec with integrated analog-to-digital and digital-to-analog converters and volume control in a 28-pin SSOP package. The device combines a stereo 24-bit ADC and stereo 24-bit DAC, uses delta-sigma conversion techniques, and operates from a single +5 V power supply. An audio codec is a mixed-signal semiconductor that converts signals between the analog and digital domains. The CS4224 family belongs to the codec hierarchy, which includes audio codecs, interface ICs, data converters, and broader signal-processing semiconductors. Its integrated ADC and DAC reduce the number of external conversion components needed in professional audio, communications, and digital audio equipment. Key features include 24-bit conversion resolution, a stated 105 dB signal-to-noise characteristic, integrated volume control, stereo conversion channels, and operation from one +5 V supply. These characteristics make the device appropriate for audio capture and playback systems where a compact, dedicated codec is preferable to discrete converters. Its integrated volume function can simplify analog-level control, although system-level gain planning must prevent overload and preserve headroom. The CS4224-BS uses delta-sigma conversion to implement the analog-to-digital and digital-to-analog functions. According to the Cirrus Logic CS4224 family datasheet, the architecture is designed for high-performance 24-bit audio operation in a single integrated device. Exact interface timing, clock requirements, analog performance, input and output topology, and recommended external component values must be confirmed against the manufacturer datasheet before layout or firmware is finalized. Typical uses include digital audio consoles, multimedia and communications equipment, sound-card signal paths, and other stereo audio systems requiring simultaneous analog capture and playback. In such systems, the codec can sit between analog microphones or line-level sources and a digital audio processor, while digital program audio is converted back to analog for monitoring or amplification. Designers should follow the manufacturer pinout and reference connection exactly, paying particular attention to analog grounding, supply decoupling, clock routing, and the treatment of unused inputs and outputs. Because the verified product listing identifies the CS4224-BS as a 28-SSOP and describes it as a 24-bit, 105 dB codec with volume control, those details can be cited confidently; additional electrical values remain subject to the datasheet. This page consolidates the verified distributor identity, pricing reference, package information, family-level description, drop-in evidence, and practical design guidance. It also distinguishes confirmed specifications from parameters that still require verification, providing a more useful engineering record than an uncontextualized distributor listing.

RFQ پەیوەندی
CS4226-BQ 6-Channel Surround Sound Codec | Cirrus Logic
CS4226-BQ

CS4226-BQ 6-Channel Surround Sound Codec | Cirrus Logic

The Cirrus Logic CS4226-BQ is a six-channel surround-sound audio codec with stereo analog-to-digital conversion, six digital-to-analog channels, and independent volume control, supplied in a 44-pin TQFP package measuring 10 mm by 10 mm. It operates from a 4.75 V to 5.25 V supply and is specified across a -40 °C to +85 °C temperature range. The supported digital interfaces include I2C and SPI, while the verified device data identifies a sampling-frequency range of 4 kHz to 50 kHz. An audio codec is a mixed-signal integrated circuit that converts between analog audio signals and digital audio data. Within the semiconductor hierarchy, it is an interface IC and audio codec rather than a conventional amplifier or standalone converter. The CS4226 combines delta-sigma conversion stages, a stereo ADC path, six DAC channels, independent channel-volume functions, and digital control into one device for multichannel audio systems. The principal feature of the CS4226-BQ is its six-channel DAC architecture with independently selectable volume control for each output. This allows a multichannel system to balance individual speaker or surround channels in software. The device also provides a stereo ADC, an I2C/SPI control interface, and a frequency range suitable for conventional digital audio streams. Its single 5 V operating region simplifies analog and digital supply planning when the rest of the system uses a compatible rail. The CS4226 family uses delta-sigma conversion techniques rather than the R-2R ladder architecture associated with some high-end audio converters. Delta-sigma converters integrate a noise-shaping and digital-filtering process into the conversion path. The CS4226 datasheet identifies the component as a surround-sound codec, and its control-port listings include SCL/CCLK, SDA/CDOUT, AD1/CDIN, AD0/CS, LRCK, SCLK, and the six DAC data inputs and outputs. Typical uses include surround-sound decoding in home theater equipment, multichannel amplifier systems, active speaker electronics, AV receivers, and other equipment requiring several independently controlled digital audio outputs. A stereo source can be routed into the codec's digital conversion and processing architecture, while separate digital streams or channels can be assigned to the six DAC outputs. The device can also be paired with external amplifiers when the required output power exceeds the codec's signal-routing role. Designers should treat the CS4226-BQ as a mixed-signal device and preserve clean separation between analog and digital return currents. The 5 V supply must remain within the specified 4.75 V to 5.25 V range, and unused analog, digital, and control resources should be terminated according to the manufacturer datasheet. PCB layout, grounding, clocking, and supported data-format details must be confirmed from the complete CS4226 documentation before a production design is released. This page consolidates verified distributor and datasheet information, organizes the commercial and technical selection questions engineers commonly need, and explicitly identifies parameters that require confirmation from the manufacturer documentation. That distinction is important because the public search results verify the core codec identity, package, supply range, temperature range, interface types, and sampling range but do not expose every electrical, timing, pin-level, and lifecycle detail.

RFQ پەیوەندی
CS4226-BQZ 6-Channel Audio Codec | Cirrus Logic
CS4226-BQZ

CS4226-BQZ 6-Channel Audio Codec | Cirrus Logic

The Cirrus Logic CS4226-BQZ is a single-chip surround-sound audio codec with one stereo analog-to-digital converter, six digital-to-analog converters, and independently selectable volume control for every DAC channel. It operates from a single +5 V supply and is packaged in a 44-lead TQFP measuring 10 mm by 10 mm. The converters use delta-sigma conversion techniques, integrating the ADC, multi-channel DAC outputs, and output attenuation into one device. An audio codec is a mixed-signal integrated circuit that converts between analog audio and digital audio data. Its position in the signal chain is the interface between analog input circuitry and a digital audio processor. A codec may also include clocking, digital audio interfaces, gain control, and format conversion. The CS4226 belongs to the broader codec family and the Cirrus Logic multichannel audio converter product class. The principal feature of the CS4226-BQZ is its six-channel DAC arrangement. Each of the six digital-to-analog channels has its own volume control, allowing a system designer to attenuate individual surround channels without implementing six separate external attenuator networks. The single stereo ADC supports two analog input channels, making the codec suitable for systems that require both multichannel playback and stereo capture. The device uses delta-sigma conversion techniques for its stereo ADC and six DAC channels. This architecture supports compact implementation of multiple high-resolution audio outputs in a single package. The independent channel attenuation function is particularly useful in surround-sound systems where front, rear, center, subwoofer, and auxiliary channels may require different output levels. Typical applications include multichannel home theater receivers, surround-sound amplifier boards, DVD and Blu-ray player analog output stages, set-top boxes, digital television audio boards, and other consumer audio equipment requiring multiple DAC channels. Because the package exposes a substantial number of analog, digital, power, and ground connections, careful partitioning of analog and digital return currents is essential. Design the board so the analog output stages and passive components remain physically separated from high-current switching nodes and digital clock lines. Use the pin-description table in the manufacturer datasheet when assigning PCB nets, and confirm bypass-capacitor placement, analog ground handling, and output-load requirements against the device's recommended application circuit. This page organizes the available CS4226-BQZ technical information with engineering-focused design notes, specification markers for unavailable values, and sourcing guidance. It is intended to help engineers evaluate the codec before committing a 44-lead mixed-signal layout.

RFQ پەیوەندی
CS4226-KQZ 6-Channel Surround Sound Codec | Cirrus Logic
CS4226-KQZ

CS4226-KQZ 6-Channel Surround Sound Codec | Cirrus Logic

Cirrus Logic CS4226-KQZ is a single-chip surround sound audio codec with one stereo analog-to-digital converter and six digital-to-analog converter channels. It uses delta-sigma conversion techniques and operates from a +5 V supply. The device is packaged in a 44-pin TQFP measuring 10 mm by 10 mm, making it suitable for multichannel consumer audio, home-theater, automotive entertainment, and multimedia systems where several digital playback channels and one stereo capture path are required. The CS4226 is an audio codec rather than a general-purpose DSP. In a typical design, its digital audio interface connects to a host controller or audio processor, while the ADC path accepts a stereo analog input. The six DAC outputs provide independently controlled digital playback channels for surround-sound systems. According to the manufacturer description, the six DAC channels include independent volume control, allowing a system designer to establish different output levels for individual channels without implementing a separate external attenuator for every channel. Delta-sigma conversion is the key architectural feature of the CS4226. This approach converts quantized audio data using continuous-time and discrete-time filtering techniques, producing a digital-to-analog output suitable for multichannel audio reproduction. The same chip combines conversion and volume-control functions, reducing the number of separate audio ICs required in a surround-sound design. Compared with a system using discrete converter packages, the integrated codec can simplify board partitioning and reduce the number of interconnects. The CS4226-KQZ is identified in distributor listings as a six-channel audio volume-control and surround-sound codec in a 44-TQFP package. Its primary role is to accept digital audio data, perform conversion, and provide multiple analog output channels with independent level control. The exact sample-rate range, DAC and ADC resolution, analog input range, output signal-to-noise ratio, clock requirements, and recommended external component values should be confirmed in the Cirrus Logic CS4226 datasheet before finalizing a new PCB design. Because the codec integrates both conversion and channel-level control, board-level implementation depends on correct analog grounding, stable supply bypassing, and compliant routing of the digital and analog signals. Place the required decoupling capacitors close to the supply pins, keep analog output routing away from high-current digital paths, and follow the manufacturer’s reference layout for the exposed package and signal-return connections. Do not infer a replacement’s suitability from its codec description alone; verify pin assignment, clock interface, supply requirements, and channel mapping. This page consolidates the confirmed CS4226-KQZ product identity, package information, sourcing links, and design considerations into an engineering-oriented component reference. It also distinguishes confirmed manufacturer and distributor information from specifications that must be taken directly from the CS4226 datasheet.

RFQ پەیوەندی
CS4280-CM Audio Volume Control IC | Cirrus Logic | PCI
CS4280-CM

CS4280-CM Audio Volume Control IC | Cirrus Logic | PCI

Cirrus Logic CS4280-CM is a one-channel audio volume-control and power-management IC for PCI audio systems, supplied in a 100-pin MQFP package measuring 20 mm by 14 mm. The verified operating-temperature range is 0°C to +70°C, while the listed supply ranges are 3 V to 3.6 V and 4.75 V to 5.25 V. Its documented features include an integrated phase-locked loop, on-chip digital gain, an asynchronous digital serial interface, and power-management functions. The CS4280 is associated with CrystalClear PCI audio implementations and is commonly paired with the CS4297 audio codec. An audio volume-control IC is a specialized interface-circuit category that controls signal level and coordinates an audio subsystem with its digital host. Within the broader hierarchy, the CS4280-CM belongs to the audio special-purpose interface IC class, which falls under interface ICs and ultimately integrated circuits. Its role differs from a general-purpose audio codec: the volume-control device manages gain and supporting control functions, while the companion codec performs much of the audio conversion and signal processing. This division of responsibilities was common in PCI-based sound-card architectures. The CS4280-CM combines digital gain control with internal synchronization support. The integrated phase-locked loop can provide the timing reference required for coordinated digital audio operations, while the asynchronous digital serial interface allows the host controller to exchange control information with the device. On-chip digital gain provides software-addressable level adjustment without relying exclusively on an external passive attenuator. Together, these features support centralized volume control, mute-related system management, and coordinated operation with a companion audio codec. The CS4280 belongs to a family of legacy Crystal Semiconductor and Cirrus Logic audio devices designed for personal-computer sound-card implementations. Verified cross-reference information identifies CS4281-CM as an alternative, and the CS4280 is documented as pin-compatible with the earlier CS4614 and CS4622/CS4624 families. These relationships are useful for repair and legacy-platform work, although board-level compatibility must include verification of supply rails, clocking, software registers, and companion codec requirements. The MQFP package is intended for surface-mount assembly and provides a large, inspectable footprint compared with modern compact audio IC packages. Typical uses include CrystalClear PCI sound cards, DOS-era and Windows 98-era multimedia computers, multi-function audio adapters, and legacy industrial or retrocomputing systems that retain support for the CS4280 and its associated drivers. The CS4297-JQ is a relevant companion because verified sources specifically describe the CS4280 as commonly used with the CS4297 codec. The CS4216-KL represents another nearby audio-interface family that may be relevant when comparing platform architectures, although it is not presented as a direct substitute for the CS4280-CM. When repairing or repurposing a board, verify the complete 100-pin footprint, 3.3 V and 5 V rail requirements, clock connections, serial interface topology, and codec handshake before ordering. The documented 0°C to +70°C range limits deployment to commercial-temperature environments unless the surrounding system and the actual sourced component provide wider qualification. Because the verified material identifies the CS4280 family as an obsolete or end-of-life product, procurement planning should emphasize authorized inventory, traceable sourcing, and a full functional test after replacement.

RFQ پەیوەندی
CS4297-JQ AC'97 Stereo Audio Codec | Cirrus Logic | PC
CS4297-JQ

CS4297-JQ AC'97 Stereo Audio Codec | Cirrus Logic | PC

Cirrus Logic CS4297-JQ is a 2-channel, AC'97 1.03-compatible stereo audio codec designed for PC multimedia systems and housed in a 48-TQFP 7 x 7 mm package. The device uses CrystalClear delta-sigma and mixed-signal technology to support high-quality audio in desktop, portable, and entertainment PCs. It integrates stereo modulation and a 48-kHz audio interface for legacy multimedia designs. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and accepts analog inputs for digital processing. In the product hierarchy, the CS4297-JQ is an audio codec and audio modulator, belonging to the broader interface IC and semiconductor categories. Its legacy AC'97 interface connects a host audio controller to external codec and speaker circuitry in PC sound-card architectures. The verified product data identifies the CS4297-JQ as an AC'97 1.03-compatible stereo codec with two channels. Its package is specified as 48-TQFP at 7 x 7 mm by DigiKey, while related Cirrus Logic records identify the package as LQFP. The compact surface-mount package supports compact desktop and portable multimedia layouts, although the large 48-pin footprint requires careful fanout and layout planning. Technical documentation describes the analog line inputs as internally biased at the Vrefout voltage reference and requiring AC coupling. The maximum allowable line input is 1 V RMS. These details make external coupling, input attenuation, and analog-ground return paths central to achieving predictable signal amplitude and reduced distortion in a legacy sound-card implementation. Typical applications include PC sound cards, desktop multimedia systems, portable entertainment computers, legacy AC'97 audio subsystems, and retro computer restorations. The device is particularly relevant when preserving an original SoundFusion architecture is more important than selecting a current USB or HD Audio codec. Designers should verify the complete pinout and electrical limits against the manufacturer datasheet before layout or repair work. AC-coupled line inputs require suitable passive components, while mixed-signal placement and grounding must keep switching and digital return currents away from sensitive audio paths. The listed alternatives should also be checked for exact interface, voltage, clocking, and pin compatibility rather than package alone. This page consolidates verified distributor descriptions, cross-reference findings, practical application context, and design cautions for engineers sourcing or restoring systems that depend on this discontinued stereo AC'97 codec.

RFQ پەیوەندی
CS4297A-JQ - AC'97 Stereo Audio Codec | Cirrus Logic
CS4297A-JQ

CS4297A-JQ - AC'97 Stereo Audio Codec | Cirrus Logic

The Cirrus Logic CS4297A-JQ is an AC'97 2.1-compatible stereo audio codec for PC multimedia systems, featuring CrystalClear delta-sigma mixed-signal conversion, 18-bit audio, 20-bit S/PDIF support, and SPI control in a 48-LQFP 7 x 7 mm package. An audio codec is a mixed-signal interface IC that converts between digital audio data and analog microphone or line-level signals. The CS4297A-JQ combines one analog-to-digital converter, one digital-to-analog converter, and the AC'97 serial audio interface used by PC-compatible multimedia controllers. Within the semiconductor hierarchy, it belongs to the audio-codec and interface-IC categories rather than a standalone amplifier or converter. Key features include AC'97 2.1 compatibility, stereo conversion, CrystalClear delta-sigma technology, 18-bit ADC and DAC resolution, a 20-bit S/PDIF interface, and SPI configuration. These functions allow a PC multimedia system to capture and playback stereo audio while sharing digital control through the SPI interface. The 48-LQFP package also provides a defined leaded footprint suitable for conventional surface-mount PCB assembly. The device integrates analog input and output circuitry with a digital AC-Link path. Its delta-sigma conversion architecture is intended for multimedia audio rather than high-bandwidth industrial signal acquisition. The S/PDIF interface provides a digital route for digital audio, while the AC'97 interface connects the codec to a compatible multimedia controller. Exact clock requirements, conversion-rate limits, analog performance, and electrical limits must be confirmed in the manufacturer datasheet before final system design. Typical uses include legacy PC multimedia systems, desktop and portable entertainment computers, and sound cards that require an AC'97-compatible stereo codec. It is particularly relevant when maintaining or repairing an existing PC architecture rather than designing a new USB or I2S audio subsystem. Software compatibility also depends on the host controller, operating system, driver, and the exact AC'97 electrical implementation. For new designs, confirm that the legacy AC'97 architecture is required and that the host controller supports the codec's serial protocol. Preserve the manufacturer's recommended decoupling, analog layout, clocking, and grounding practices. Because this is an older PC multimedia component, lifecycle status, interface timing, and long-term availability deserve verification before committing a new production platform. This page combines the verified CS4297A-JQ product identity, package information, AC'97 feature set, ordering alternatives, selection guidance, and practical integration notes. It also distinguishes confirmed drop-in ordering notation from broader functional equivalents so engineers can assess replacement risk without assuming that every similar audio codec is electrically interchangeable.

RFQ پەیوەندی
CS4299-XQ Stereo AC'97 Audio Codec | Cirrus Logic
CS4299-XQ

CS4299-XQ Stereo AC'97 Audio Codec | Cirrus Logic

The Cirrus Logic CS4299-XQ is a mixed-signal stereo audio codec designed for AC'97 2.1-compatible PC multimedia systems. It combines a digital controller interface, analog audio conversion, and CrystalClear delta-sigma mixed-signal technology in a surface-mount LQFP package. The device was intended to pair with a digital controller located on the PCI bus or integrated within system core logic, making it primarily relevant to legacy desktop, portable, and entertainment PC designs. An audio codec is a mixed-signal integrated circuit that converts digital audio data into analog signals and converts analog sound into a digital format for processing by a host controller. The CS4299-XQ is an AC'97 codec, so its principal interfaces are the Audio Codec '97 serial link and analog audio connections rather than a modern USB or I2S audio interface. AC'97 was designed for PC multimedia architectures and supports synchronized audio, modem, and control functions through a defined digital bus. According to the Cirrus Logic CS4299 datasheet, the CS4299 contains AC'97-compliant control registers and additional Cirrus Logic-defined control registers. These registers configure the codec's core functions and support firmware or software control of audio behavior. The implementation uses CrystalClear delta-sigma and mixed-signal technology, a Cirrus Logic approach intended to support high-precision audio conversion in multimedia equipment. The CS4299-XQ is relevant to retrofitted desktop computers, industrial legacy systems, embedded AC'97 hosts, audio test equipment, and restoration projects involving older PCI-based sound subsystems. Its AC'97 architecture provides a direct interface to compatible host controllers, while analog input and output stages support connections to microphones, line-level sources, speakers, and external audio amplifiers. For a new design, confirm that the host controller still supports AC'97 2.1 and verify the complete pin, clock, voltage, and analog specification before layout release. The CS4299 is a legacy codec, and modern systems commonly use USB audio, I2S, or integrated HD audio controllers instead. An existing motherboard is also a critical consideration because the required driver, interrupt, bus, and codec-support capabilities may not exist on current platforms. This page combines the confirmed codec architecture and AC'97 application information with engineering guidance, comparison fields, and sourcing links for the CS4299-XQ. It also identifies which electrical and package details should be checked against the manufacturer datasheet before production use.

RFQ پەیوەندی
CS4630-CM - CrystalClear PCI Audio Accelerator | Cirrus Logic
CS4630-CM

CS4630-CM - CrystalClear PCI Audio Accelerator | Cirrus Logic

Cirrus Logic CS4630-CM is a CrystalClear SoundFusion PCI audio accelerator offered in a 128-pin MQFP surface-mount package measuring 14 mm by 20 mm by 2.85 mm. The device is described as a high-performance upgrade to the CS4624 PCI audio accelerator and supports legacy compatibility modes that enable real-mode DOS compatibility within PCI-only audio subsystems. It also operates from multiple supply rails, including 3.3 V, 2.5 V, and 5 V conditions documented in the manufacturer datasheet. A PCI audio accelerator is an interface integrated circuit that manages audio data movement between a host computer's PCI bus and audio codecs or other audio peripherals. Its role within the broader hierarchy is an interface IC and, more specifically, an audio interface device. Legacy compatibility support distinguishes the CS4630-CM from basic modern audio controllers by allowing older operating environments to interact with PCI-based audio hardware. The verified electrical information includes operating test conditions of 0°C to 70°C, with PCIVDD and CRYVDD at 3.3 V, CVDD at 2.5 V, and VDD5REF at 5 V. The datasheet identifies PCI signal characteristics with a 3.3 V logic-high level, a 0 V logic-low level, and a 1.4 V reference level. It also documents dedicated second AC'97 data-input, bit-clock, and link-clock functions. The CS4630-CM supports a primary and secondary AC'97 audio-link arrangement, with dedicated pins for second AC'97 data input, bit clock, and serial audio traffic. This architecture is appropriate for legacy PCI multimedia adapters, industrial computers, and specialized embedded systems that retain AC'97 codec connections while requiring the CS4630's documented compatibility capabilities. Typical engineering uses include DOS-compatible PCI sound cards, industrial PCI audio subsystems, legacy embedded-computer upgrades, and audio adapters requiring a dedicated hardware accelerator. Because the part is reported as obsolete or end-of-life, procurement should emphasize authorized inventory, traceability, and functional validation rather than treating new design adoption as the default. A critical design consideration is package verification. The part is documented as a 128-MQFP, also identified as a 128-BFQFP in MS-022, rather than a modern QFN package. PCB footprints, pin numbering, and soldering process requirements must therefore be checked against the original package drawing before assembly or replacement. This product page consolidates the verified manufacturer and distributor information, observed pricing, lifecycle evidence, package data, technical operating conditions, and application guidance for engineers evaluating the obsolete CS4630-CM PCI audio accelerator.

RFQ پەیوەندی
CS8405A-CS - 96 kHz Audio Transmitter | Cirrus Logic
CS8405A-CS

CS8405A-CS - 96 kHz Audio Transmitter | Cirrus Logic

Cirrus Logic CS8405A-CS is a monolithic CMOS digital audio interface transmitter designed for 96 kHz audio and digital data transmission. It accepts audio and digital data, multiplexes and encodes the input, and drives the resulting signal onto a cable in accordance with AES3, IEC60958, S/PDIF, or EIAJ CP1201 formats. The device is packaged in a 28-pin SOIC package. A digital audio interface transmitter is a specialized interface integrated circuit that converts source audio and associated digital data into a standardized serial transmission format. Within the product hierarchy, it belongs to digital audio interfaces, interface ICs, and broader semiconductor signal-conditioning and communication devices. Its principal purpose is to provide a standardized digital audio output while reducing the system-level circuitry required at the transmitter interface. The CS8405A family supports the AES3, IEC60958, S/PDIF, and EIAJ CP1201 interfaces described by the manufacturer. Operation at up to 96 kHz makes the transmitter suitable for professional digital audio equipment, consumer audio systems, recording equipment, and broadcast infrastructure where a standards-compliant digital audio connection is required. The monolithic CMOS implementation combines input handling, multiplexing, encoding, and output driving in one device. The transmitter architecture accepts parallel or serial audio information, selects the required data for transmission, applies the selected digital-audio encoding, and presents the encoded output through the interface stage. This integration reduces the number of discrete encoding components required around a digital audio connector. System designers should still use the manufacturer pin-description table and application guidance to assign clock, control, status, ground, and signal connections correctly. Typical CS8405A applications include digital mixing consoles, professional audio peripherals, CD and broadcast equipment, recording interfaces, consumer receivers, and equipment that exchanges digital audio using S/PDIF or AES3-compatible connections. In these systems, the transmitter can convert an internal digital-audio stream into the format expected at an external digital-audio connector or cable. The primary design consideration is interface integrity. Keep the transmitter clock and data connections short, follow the reference layout and grounding guidance in the Cirrus Logic datasheet, and account for the electrical requirements of the selected digital-audio standard. The 28-pin SOIC package also requires conventional surface-mount assembly spacing and adequate board area for routing the multiple control and data signals. This product overview combines the CS8405A-CS device function, package information, supported transmission standards, application guidance, and practical design considerations. It also distinguishes verified electrical details from parameters that require confirmation in the manufacturer datasheet before schematic release or PCB sign-off.

RFQ پەیوەندی
CS8406-CSZ - 192kHz Digital Audio Transmitter | Cirrus Logic
CS8406-CSZ

CS8406-CSZ - 192kHz Digital Audio Transmitter | Cirrus Logic

Cirrus Logic CS8406-CSZ is a 192 kHz, two-channel digital audio interface transmitter in a 28-pin SOIC package. The monolithic CMOS device accepts audio and digital data, multiplexes and encodes the signals, then drives the resulting digital audio stream onto an external cable. It supports the AES3, IEC60958, S/PDIF, and EIAJ CP1201 standards, making it a dedicated interface between an audio system and a standardized digital-audio transmission path. A digital audio interface transmitter is a specialized interface IC within the broader semiconductor hierarchy of digital audio ICs, interface controllers, and signal-processing semiconductors. Its purpose is to convert source audio and control information into a compliant digital transmission format. Unlike a conventional analog audio transmitter, the CS8406 generates a standardized digital stream that can carry two channels of high-rate audio while preserving channel status and associated digital information. The CS8406-CSZ supports operation up to 192 kHz and provides a two-channel digital audio transmission function. Its 3-wire serial control interface allows an audio system controller to configure the transmitter and manage its operating state. The monolithic CMOS construction combines the encoding, multiplexing, and output-driving functions in one device, reducing the number of separate interface components required around an audio source. The CS8406 is suitable for AV receivers, DVD receivers, CD recorders, and digital mixing consoles, according to the device documentation. It is particularly useful when a system needs to deliver AES3, IEC60958, S/PDIF, or EIAJ CP1201-compatible audio over a cable. The standardized output supports interoperability between professional audio equipment, consumer receivers, recording systems, and digital mixing infrastructure. The transmitter is also appropriate for modular audio products, broadcast and studio signal-chain equipment, digital recording systems, and test fixtures that reproduce consumer or professional digital-audio connections. A system designer should verify the required source format, control protocol, sample rate, output electrical behavior, and connector implementation against the manufacturer application guidance before releasing the circuit. A critical layout consideration is the relationship between the digital-audio output, its return path, the supply network, and the external connector. Keep the output route compact and controlled by a continuous ground reference, decouple the supply pins at the device, and avoid routing the sensitive digital clock or data path alongside unrelated switching-node traces. The CS8406-CSZ's 28-pin SOIC footprint also requires deliberate thermal and escape routing when signal access is limited. This product page combines the documented 192 kHz and two-channel capabilities, interface-standard coverage, application guidance, package details, and verified sourcing links. It also distinguishes exact replacements from receiver counterparts and different-package family members so engineers can assess PCB compatibility before redesigning an existing audio interface.

RFQ پەیوەندی
CS8406-CZZ - 192kHz Digital Audio Transmitter | Cirrus Logic
CS8406-CZZ

CS8406-CZZ - 192kHz Digital Audio Transmitter | Cirrus Logic

Cirrus Logic CS8406-CZZ is a 192kHz digital audio transmitter with two-channel audio support, a 3-wire serial control interface, and a 28-pin TSSOP package. The monolithic CMOS device accepts audio and digital data, multiplexes and encodes it, and drives the resulting digital audio signal onto an external cable or output interface. It supports AES3, IEC60958, S/PDIF, and EIAJ CP1201 digital audio formats. A digital audio transmitter is an interface IC within the broader semiconductor hierarchy of audio interface circuits, digital signal-processing support, and signal-conversion semiconductors. Unlike an analog audio output stage, it accepts digitally encoded audio and prepares that data for transmission according to a recognized digital-audio standard. This makes the device applicable at the boundary between an audio codec, DSP, CD transport, mixing console, or receiver and a digital audio connection. The CS8406-CZZ supports operation up to 192kHz, making it suitable for professional digital-audio paths operating at elevated sample rates. Its 3-wire serial interface provides a compact means for configuring or controlling the transmitter. The 28-pin TSSOP package supports surface-mount PCB assembly, while the CMOS implementation combines low static power requirements with high-speed digital signal handling. The CS8406 family is offered in commercial and automotive temperature grades. The manufacturer document identifies a commercial-grade range of -10°C to +70°C and an automotive-grade range of -40°C to +85°C. It also notes that the CS8406 is available in 28-pin TSSOP and SOIC packages. The CS8406-CZZ ordering code specifically corresponds to the TSSOP configuration listed for this part. Typical applications include AV receivers, DVD receivers, CD-R equipment, digital mixing consoles, and digital-audio transmission paths using S/PDIF, AES/EBU, or EIAJ-compatible links. In these systems, the CS8406 can serialize source audio, apply the required digital-audio framing and encoding, and provide a compliant signal to downstream receiver circuitry. Layout is especially important because high-speed digital outputs can pick up reflected signals and radiated noise. Place the CS8406, decoupling capacitors, and output-network components close together, minimize output-trace length, and provide a continuous ground reference. Follow the pin-description and layout guidance in the manufacturer datasheet when assigning nets and configuring the serial interface. This page consolidates the verified ordering information, package details, digital-audio capabilities, interface standards, temperature grades, and application guidance for the CS8406-CZZ. It also distinguishes confirmed same-family ordering options from true pin-compatible substitutes, helping engineers evaluate replacements without confusing similar audio functionality with drop-in compatibility.

RFQ پەیوەندی
CS8406-DZZ - 192kHz Stereo Digital Audio Transmitter | Cirrus Logic
CS8406-DZZ

CS8406-DZZ - 192kHz Stereo Digital Audio Transmitter | Cirrus Logic

Cirrus Logic CS8406-DZZ is a monolithic CMOS digital audio transmitter supporting two-channel audio through 192 kHz in a 28-pin TSSOP package. It encodes and transmits audio and control data according to AES3, IEC60958, S/PDIF, and EIAJ CP1201 interface standards, making it suitable for professional and consumer digital-audio equipment. A digital audio interface transmitter converts source audio and control information into a standardized serial bitstream for reliable connection between equipment. Within the signal-chain hierarchy, the CS8406 belongs to the audio interface IC category and functions as a physical-layer transmitter rather than a DAC or audio codec. It accepts digital audio input, multiplexes the associated data, applies biphase mark encoding, and drives the resulting stream through a cable, transformer, or optical transmitter. The CS8406-DZZ provides a maximum sampling rate of 192 kHz and two-channel transmission. Its 3-wire serial digital-audio control interface supports configuration of the transmitted stream. On-chip channel-status and user-bit buffering preserves metadata alongside the audio samples. The monolithic CMOS implementation combines the digital audio input, encoding, and output functions in one 28-TSSOP device. Operation is clocked from the OMCK input according to the manufacturer datasheet. The encoded output is designed for direct connection to an appropriate connector or for coupling through a transformer. AES3 and IEC60958 compatibility provides a common digital-audio format for professional equipment, while S/PDIF support targets consumer audio products. EIAJ CP1201 compatibility broadens interoperability with compatible Japanese digital-audio interfaces. Typical applications include AV receivers, DVD receivers, CD recorders, digital mixing consoles, professional audio equipment, consumer digital-audio products, and optical-transmission interfaces. Its standards support makes it useful when a system must transmit high-rate digital audio while retaining channel-status and user-bit information. Companion audio converters and codecs can supply the source signals, while isolation transformers or optical-transmitter assemblies handle the physical output path. When implementing the device, verify input clocking, serial-data format, output-level requirements, and the intended transmission medium against the application schematic. The manufacturer pin-description table should be used directly for PCB routing and decoupling. Keep the digital-audio traces short, provide a continuous ground reference, and avoid routing the transmitted clock and data through areas with high switching currents. This page combines the exact CS8406-DZZ package and interface information with practical implementation guidance, verified same-family alternatives, application mapping, and a specification comparison. These engineering views help buyers evaluate protocol compatibility, clock architecture, board layout, and source-device requirements before requesting a quote for the 28-TSSOP device.

RFQ پەیوەندی
CS8406-IS - 192kHz Digital Audio Transmitter | Cirrus Logic
CS8406-IS

CS8406-IS - 192kHz Digital Audio Transmitter | Cirrus Logic

Cirrus Logic CS8406-IS is a monolithic CMOS digital audio interface transmitter supporting up to 192 kHz, one-channel transmission, and configurable three-wire audio input in a 28-lead TSSOP-class package. The device accepts audio and digital data, multiplexes and encodes the signal, and drives the result onto a cable using AES3, IEC60958, S/PDIF, or EIAJ CP1201 formats. A digital audio interface transmitter is a signal-conditioning device within the broader digital audio IC hierarchy. It converts a parallel or serial source stream into a standardized digital-audio signal for transmission between consumer, professional, automotive, and industrial audio equipment. The CS8406 occupies the interface level between an audio codec, DAC, or digital audio source and a physical S/PDIF output. Its monolithic CMOS implementation combines the configurable input interface, channel-status handling, multiplexing, encoding, and output stage in one device. The primary verified features of the CS8406 include operation up to 192 kHz, support for one transmitted channel, AES3, IEC60958, S/PDIF, and EIAJ CP1201 standards, and a configurable three-wire input port. The transmitter architecture allows digital audio and related data to be multiplexed, encoded, and placed onto the output cable. This integration reduces the number of separate interface components required in equipment that must exchange digital audio over a standardized digital connection. The CS8406 family is designed for digital-audio source equipment requiring an industry-compatible transmitter output. Its configurable input port supports systems in which the source device presents audio through a three-wire interface rather than requiring a fixed external signal arrangement. The device separates the digital-audio transmission function from the source conversion function, allowing an existing ADC, DAC, audio codec, or digital audio engine to drive the transmitter. Typical applications include professional audio equipment, consumer audio receivers, recording-system clock and data paths, digital mixers, home-theater components, and industrial audio interfaces. The 192 kHz capability is relevant to high-resolution audio architectures, while the S/PDIF-compatible output provides a conventional link to compatible receivers and processors. System designers must still verify the source format, channel-status handling, electrical output implementation, and intended operating grade against the manufacturer datasheet. When laying out a CS8406-IS design, place the device close to the digital-audio source and minimize routing around the input and output pins. The manufacturer documentation recommends mounting decoupling capacitors on the same side of the board as the CS8406 and placing them close to the device to minimize inductance effects. Check output-interface implementation, grounding, cable termination, and any external filtering against the exact package variant before release to production. This page consolidates the verified manufacturer and distributor information for the CS8406-IS with package caveats, drop-in-family comparisons, procurement guidance, and practical layout guidance. It distinguishes confirmed CS8406 capabilities from electrical details that still require confirmation from the exact ordering code and its datasheet.

RFQ پەیوەندی
CS8411-CP Digital Audio Receiver | 256x Fs | Cirrus Logic
CS8411-CP

CS8411-CP Digital Audio Receiver | 256x Fs | Cirrus Logic

Cirrus Logic CS8411-CP is a monolithic CMOS digital audio interface receiver with on-chip clock recovery and a 256x Fs output clock, supplied in a 28-pin PDIP package. It receives and decodes professional and consumer digital-audio transmission formats identified in the manufacturer documentation as AES/EBU, IEC 958, S/PDIF, and EIAJ CP-340. A digital audio interface receiver is an interface IC that reconstructs timing and synchronization from a serial digital-audio stream. In the signal-chain hierarchy, a receiver belongs to the digital-audio interface family, connects a physical digital transmission to a clocked audio system, and forms part of the broader interface-IC and semiconductor categories. Its principal function is to recover the transmitted clock and provide synchronized timing for downstream audio-processing circuitry. The CS8411 family combines a monolithic CMOS implementation, low-jitter on-chip clock recovery, and a 256x Fs output-clock capability. These features make the device suitable for digital-audio equipment that needs a stable recovered or divided clock rather than merely decoded audio data. The -CP ordering code identifies the listed 28-pin PDIP package, allowing the part to be used in designs that support a through-hole digital-audio receiver footprint. The receiver architecture is intended for serial digital-audio links using AES/EBU, IEC 958, S/PDIF, or EIAJ CP-340 signaling. Clock recovery is particularly important when the source and receiving circuitry do not share a common low-jitter reference clock. The 256x Fs output clock provides a higher-frequency timing reference derived from the received stream, which can support downstream clocking, conversion, or synchronization functions. Typical applications include professional digital-audio equipment, consumer S/PDIF receivers, digital mixers, audio converters, recording-system clocking, and equipment interfaces that accept a digital-audio transmission. In these systems, the CS8411-CP can receive the serial stream, recover timing, and expose a predictable clock relationship to the surrounding audio architecture. Designers should verify the complete electrical limits, pin assignment, and application circuit against the Cirrus Logic datasheet before layout. PCB placement should minimize digital-clock and serial-data trace exposure to analog or high-current power paths. Decoupling and input-termination requirements must follow the manufacturer recommendations for the selected source impedance and digital-audio topology. This page consolidates the confirmed interface standards, 256x Fs clock output, CMOS implementation, package information, sourcing path, and engineering guidance for CS8411-CP. It also distinguishes verified device attributes from electrical details that require confirmation in the original manufacturer documentation.

RFQ پەیوەندی
CS8415A-CS - 96 kHz Digital Audio Receiver | Cirrus Logic
CS8415A-CS

CS8415A-CS - 96 kHz Digital Audio Receiver | Cirrus Logic

Cirrus Logic CS8415A-CS is a monolithic CMOS digital audio interface receiver designed for digital audio signals operating up to 96 kHz. The device receives and decodes one of seven channels according to the IEC 60958, S/PDIF, EIAJ CP1201, or AES3 standards. It is packaged in a 28-pin SOIC and provides a serial digital audio output port together with a four-wire microcontroller control interface. Channel-status and user-data information are assembled in block-sized buffers for straightforward read access. A digital audio interface receiver is an interface IC within the broader semiconductor and audio-processing hierarchy. Its function is to recover a serial digital audio stream from a source such as a professional audio device, optical or coaxial digital output, or home-theater interface. The recovered audio data and associated status information are then presented to a digital signal processor, converter, receiver, or control system. Cirrus Logic positions the CS8415A as a bridge between standardized digital-audio transports and downstream embedded audio processing. The CS8415A's principal system features include support for seven input channels, operation through 96 kHz, and compatibility with four digital-audio interface standards. Its serial output provides a direct path for decoded audio data, while the four-wire microcontroller port allows a host processor to configure the receiver and retrieve channel-status or user data. Blocking the metadata into readable buffers reduces the burden placed on the host software and makes the receiver suitable for systems that need both audio transport and control information. The receiver uses a monolithic CMOS implementation and accepts the standard digital-audio formats associated with professional and consumer equipment. Because the same receiver can decode several standards, a designer can simplify multi-format input handling while preserving a common internal audio path. The seven-channel capability also allows multiple sourced channels to be selected within the system, rather than requiring a separate physical interface for every transport or source. Exact clocking, voltage, channel-routing, and lock-performance details should be confirmed in the manufacturer datasheet before finalizing a new design. Typical applications include digital-audio receivers, surround-sound processors, professional audio equipment, home-theater systems, digital mixers, and audio interface converters. It is especially useful when a board must accept IEC 60958, S/PDIF, EIAJ CP1201, or AES3 sources while exposing decoded audio and channel metadata to a microcontroller or digital signal processor. Companion devices in digital-audio ecosystems include interface transceivers and audio codecs, selected according to the board's physical audio architecture. A critical design step is to verify the CS8415A-CS pin arrangement, supported input rates, electrical limits, and serial-interface timing directly from the manufacturer datasheet before PCB routing. The four-wire control port and serial audio output require careful signal-integrity planning, including short traces, stable supply distribution, and clean return paths. Designers should also confirm clock and format compatibility with the downstream processor. This product page consolidates the known CS8415A-CS function, interface standards, packaging, lifecycle information, sourcing paths, and design considerations. It also distinguishes verified technical attributes from parameters that must be checked in the datasheet, helping engineers plan receiver architecture without overlooking packaging, metadata handling, or control-interface requirements.

RFQ پەیوەندی