بەرهەمەکان (5,100+)

P82B96P - 2-Channel 400kHz I2C Buffer | Texas Instruments
P82B96P

P82B96P - 2-Channel 400kHz I2C Buffer | Texas Instruments

The Texas Instruments P82B96P is a 2-bit bidirectional I2C/SMBus buffer and cable extender operating from 2 V to 15 V at up to 400 kHz, supplied in an 8-pin PDIP package. It creates a non-latching interface between I2C buses operating at different logic levels or with different current requirements. Two Sx/Sy channels preserve bidirectional communication without separate direction-control pins. An I2C bus buffer is a signal-conditioning semiconductor that isolates or extends bus nodes, reduces loading, and can translate between logic domains. In the interface hierarchy, the P82B96 belongs to the I2C controller/buffer and extender class, then to bus-interface ICs and interface semiconductors. Its purpose is to improve compatibility among I2C master and slave devices operating across logic levels from 2 V to 15 V. Key features include two bidirectional channels, a 2 V to 15 V operating power-supply range, and a stated 400 kHz operating frequency. The device supports bidirectional data transfer and can connect buses with different voltage and current levels. The PDIP package is suitable for conventional through-hole assembly and prototyping, while its non-latching design avoids requiring an explicit direction-control signal. Technically, the P82B96 uses slightly different logic-low voltage levels on the Sx/Sy side to prevent latching in bidirectional operation. The manufacturer states that two or more Sx or Sy I/O nodes must not be connected together on the same node because the design does not support that configuration. Bus capacitance, rise time, pull-up resistance, and logic-level limits must therefore be checked during implementation. Typical uses include isolating I2C subsystems, connecting devices operating at 2 V through 15 V logic levels, interfacing with SMBus-style systems, and improving electrical loading on longer bus segments. The P82B96 is also appropriate when a standard bus needs an intermediate buffer node rather than a directional translator. For PCB implementation, preserve the manufacturer-recommended pull-ups on each bus side, keep the buffer close to the bus split, and route each side as a continuous bidirectional node. Do not combine multiple Sx or Sy outputs on one node. Confirm timing, voltage, capacitance, and logic-level compatibility before treating the 400 kHz rating as guaranteed for a particular bus. This page consolidates manufacturer and distributor information, replacement assessment, timing considerations, and practical design guidance for engineers evaluating the P82B96P.

RFQ پەیوەندی
P82B96PN - Dual 2-15V I2C Bus Buffer | NXP Semiconductors
P82B96PN

P82B96PN - Dual 2-15V I2C Bus Buffer | NXP Semiconductors

NXP Semiconductors P82B96PN is a dual bidirectional I2C bus buffer with a 2 V to 15 V operating-voltage range, 400 kHz bus capability, and a low-power supply input. The device is supplied in an 8-pin SOT97-1 plastic DIP package and is designed to split an I2C connection into separate forward and reverse transmit and receive paths. An I2C bus buffer is an interface IC that electrically isolates or reorganizes bidirectional bus signals while preserving two-wire communication. The P82B96 belongs to the buffer and line-driver hierarchy within interface ICs and power-management-adjacent signal conditioning. Its two independent I2C channels handle SCL and SDA signals, providing controlled signal routing for boards, modules, or cable-linked devices where direct capacitive loading or bus segmentation would otherwise reduce reliability. The principal operating specifications are a 2 V to 15 V supply-voltage range, support for I2C operation up to 400 kHz, and a temperature range from -40 °C to +85 °C. The device provides separate Tx, Rx, Ty, and Ry signals alongside the Sx and Sy bus-side pins, allowing each I2C channel to be divided into forward and reverse paths. Its low supply-current design is suitable for power-conscious embedded systems. Technically, the P82B96 uses bidirectional I2C-capable I/O structures rather than a unidirectional buffer with an external direction-control pin. According to the manufacturer datasheet, the Sx and Sy side accepts normal I2C logic levels and can also connect to Tx or Rx signals from another P82B96. The Tx/Rx and Ty/Ry pins use standard I2C logic levels, while the bus-side low-voltage behavior is intentionally slightly different to avoid latching. Typical uses include isolating an I2C master from a remote sensor module, extending the usable separation between two bus nodes, splitting SCL and SDA into directional test paths, and supporting cable-based I2C links in industrial or consumer equipment. The 2 V to 15 V supply range accommodates conventional 2.5 V, 3.3 V, 5 V, and higher-voltage interface environments where device-level compatibility is confirmed. Designers should verify all logic-level thresholds, capacitance, propagation delay, and bus timing against the NXP datasheet before relying on the buffer in a new system. Decoupling and signal-routing practices must prevent the remote bus node from introducing excessive loading, ringing, or unintended multiple-driver conditions. Two or more Sx or Sy I/O nodes must not be connected together on the same node. This product record combines verified NXP specifications, distributor availability references, same-package replacement analysis, and practical design guidance. It identifies the documented benefits and constraints of the P82B96PN while distinguishing true DIP-8 alternatives from parts that require a different footprint.

RFQ پەیوەندی
P82B96PW - 2-Channel 2-15V I2C Bus Extender | TI
P82B96PW

P82B96PW - 2-Channel 2-15V I2C Bus Extender | TI

The Texas Instruments P82B96PW is a dual bidirectional I2C-compatible bus buffer and cable extender with a 2 V to 15 V operating range, 400 kHz bus speed, and an 8-pin TSSOP (PW) package. It supports bidirectional data transfer between I2C/SMBus systems operating at different voltage or current levels. According to the verified manufacturer product information, the device is intended for interface buffering in systems where trace length, capacitance, voltage-level differences, or loading reduce bus reliability. Its dual-channel architecture allows two independent bus directions or paired sideband signals to be extended through the same package. The P82B96 family belongs to the bidirectional bus-buffer category, which includes I2C buffers, SMBus repeaters, level translators, and bus extenders. Unlike a unidirectional logic buffer, a bidirectional bus buffer must detect and preserve the direction of data while allowing both sides to drive and receive the same lines. This makes the device useful between a host controller and remote sensors, EEPROMs, FPGAs, embedded processors, or other I2C targets that operate at a different electrical reference or require additional bus drive capability. The verified listing identifies P82B96PW as a 2-channel, 400 kHz buffer/reDriver in an 8-pin TSSOP package. The manufacturer describes the device family as a 2-bit bidirectional 2- to 15-V I2C/SMBus buffer and cable extender. The operating temperature range shown in the verified part information is -40 °C to +85 °C. The PW package is a compact surface-mount form suitable for industrial and embedded board layouts, while the 2-bit configuration reduces the number of separate buffer packages needed when multiple related bus lines must be conditioned. A key design consideration is the relationship between bus capacitance, cable or trace length, pull-up resistance, and supported clock rate. Buffering does not remove the need for correct I2C pull-up placement; it provides an intermediate drive point that can isolate the source-side and remote-side buses. The engineer should verify voltage compatibility on both sides, account for the maximum remote-bus loading, and test the complete network at the intended 400 kHz operating condition. The verified datasheet source should be consulted for detailed logic thresholds, timing, and application limits. Typical uses include extending an I2C sensor bus in industrial control equipment, buffering an SMBus connection in a power system, separating a controller from a cable-connected peripheral, and bridging logic domains when voltage-level and current requirements differ. It is also useful in test fixtures and embedded platforms where a long cable or dense peripheral load would otherwise weaken the original bus. Compared with a simple series resistor or passive level shifter, the P82B96 provides an active bidirectional buffer and defined cable-extension function, while still requiring careful external pull-up and grounding design. This product page consolidates the verified manufacturer description, distributor listing information, package identification, pricing reference, and application-oriented guidance. It does not infer unprovided electrical thresholds or invent a cross-brand substitute where the supplied cross-reference data does not establish pin compatibility. The result is intended to support initial component selection and PCB planning, followed by validation against the official P82B96 datasheet and application circuit.

RFQ پەیوەندی
P82B96PWG4 - 2-Channel 400kHz I2C Bus Buffer | Texas Instruments
P82B96PWG4

P82B96PWG4 - 2-Channel 400kHz I2C Bus Buffer | Texas Instruments

Texas Instruments P82B96PWG4 is a 2-bit dual bidirectional I2C/SMBus buffer and cable extender that supports operation from 2 V to 15 V at up to 400 kHz. The device accommodates two channels, operates from a 15 V maximum supply, and is supplied in an 8-pin TSSOP package. It supports bidirectional I2C data transfer, interfaces buses operating at different logic levels, and allows bus capacitance up to 400 pF on the main bus. An I2C bus buffer is an interface IC placed within a controller-to-peripheral bus path to extend reach, isolate bus segments, reconcile voltage domains, and improve capacitive loading behavior. The P82B96 belongs to the bidirectional bus buffer family within the broader interface IC and semiconductor hierarchy. It is useful where one I2C controller must communicate with remote devices across cable or PCB-routing distances. Key features include two independently buffered bidirectional channels, a 400 kHz operating frequency, operation over a 2 V to 15 V supply range, and support for connecting I2C buses with different logic levels. The 8-TSSOP package supports compact surface-mount layouts. According to the manufacturer datasheet, the device also handles the added low period associated with bus capacitance and clock stretching while preserving standard I2C timing behavior. The P82B96 architecture uses passive-style bus-side connections in the familiar I2C arrangement, allowing each buffered segment to communicate in both directions. Designers should account for the device's internal delay, pull-up placement, capacitance limits, and voltage compatibility when calculating timing and fault behavior. The manufacturer states that the actual bus-clock period, including a 482 ns clock-stretch effect, can be limited to approximately 2745 ns, corresponding to about 364 kHz under the cited condition. Typical applications include extending an I2C sensor bus across a larger PCB, isolating a high-capacitance peripheral segment, bridging sections of an industrial control system, and supporting low-voltage logic domains on one side and higher-voltage I2C devices on the other. It is also suitable for cable-based I2C extensions where the permitted bus capacitance is confirmed by system calculations. A key design consideration is pull-up placement: each I2C bus segment normally requires its own appropriate pull-up network, and placing pull-ups on the wrong side of the buffer can undermine isolation or exceed the permitted capacitance. Verify timing with the slowest participating device, clock stretching, cable length, and actual bus capacitance rather than relying only on the nominal 400 kHz rating. This page consolidates verified manufacturer and distributor information, a drop-in-alternative assessment, application guidance, and practical interface-design considerations into a design-oriented reference for engineers evaluating the P82B96PWG4.

RFQ پەیوەندی
P82B96PWR - 2-Channel 2-15V I2C Bus Extender | TI (Tape & Reel)
P82B96PWR

P82B96PWR - 2-Channel 2-15V I2C Bus Extender | TI (Tape & Reel)

The Texas Instruments P82B96PWR is a dual bidirectional I2C-compatible bus buffer and cable extender with a 2 V to 15 V operating range, 400 kHz bus speed, and an 8-pin TSSOP (PW) package. It supports bidirectional data transfer between I2C/SMBus systems operating at different voltage or current levels. According to the verified manufacturer product information, the device is intended for interface buffering in systems where trace length, capacitance, voltage-level differences, or loading reduce bus reliability. Its dual-channel architecture allows two independent bus directions or paired sideband signals to be extended through the same package. The P82B96 family belongs to the bidirectional bus-buffer category, which includes I2C buffers, SMBus repeaters, level translators, and bus extenders. Unlike a unidirectional logic buffer, a bidirectional bus buffer must detect and preserve the direction of data while allowing both sides to drive and receive the same lines. This makes the device useful between a host controller and remote sensors, EEPROMs, FPGAs, embedded processors, or other I2C targets that operate at a different electrical reference or require additional bus drive capability. The verified listing identifies P82B96PWR as a 2-channel, 400 kHz buffer/reDriver in an 8-pin TSSOP package. The manufacturer describes the device family as a 2-bit bidirectional 2- to 15-V I2C/SMBus buffer and cable extender. The operating temperature range shown in the verified part information is -40 °C to +85 °C. The PW package is a compact surface-mount form suitable for industrial and embedded board layouts, while the 2-bit configuration reduces the number of separate buffer packages needed when multiple related bus lines must be conditioned. A key design consideration is the relationship between bus capacitance, cable or trace length, pull-up resistance, and supported clock rate. Buffering does not remove the need for correct I2C pull-up placement; it provides an intermediate drive point that can isolate the source-side and remote-side buses. The engineer should verify voltage compatibility on both sides, account for the maximum remote-bus loading, and test the complete network at the intended 400 kHz operating condition. The verified datasheet source should be consulted for detailed logic thresholds, timing, and application limits. Typical uses include extending an I2C sensor bus in industrial control equipment, buffering an SMBus connection in a power system, separating a controller from a cable-connected peripheral, and bridging logic domains when voltage-level and current requirements differ. It is also useful in test fixtures and embedded platforms where a long cable or dense peripheral load would otherwise weaken the original bus. Compared with a simple series resistor or passive level shifter, the P82B96 provides an active bidirectional buffer and defined cable-extension function, while still requiring careful external pull-up and grounding design. This product page consolidates the verified manufacturer description, distributor listing information, package identification, pricing reference, and application-oriented guidance. It does not infer unprovided electrical thresholds or invent a cross-brand substitute where the supplied cross-reference data does not establish pin compatibility. The result is intended to support initial component selection and PCB planning, followed by validation against the official P82B96 datasheet and application circuit.

RFQ پەیوەندی
P82B96PWRG4 - 2-15V 400kHz I2C Buffer | Texas Instruments
P82B96PWRG4

P82B96PWRG4 - 2-15V 400kHz I2C Buffer | Texas Instruments

The Texas Instruments P82B96PWRG4 is a 2-bit bidirectional I2C and SMBus buffer designed for bus isolation, voltage-level translation, and cable extension between buses operating at different logic levels. Its operating supply range is 2 V to 15 V, supported bus frequency is 400 kHz, and the device is packaged in an 8-pin TSSOP. The P82B96 provides two independently buffered bidirectional channels and supports multiple P82B96 devices in star or multipoint configurations. An I2C bus buffer is an interface IC placed between two bus segments to buffer bidirectional clock and data signals. It helps isolate bus capacitance, separate supply domains, extend cable reach, and prevent contention between devices on different portions of a bus. Within the power-management hierarchy, the P82B96 functions as a signal-conditioning and interface component rather than a regulator or digital logic gate. The principal feature set includes bidirectional data transfer, operation with I2C and SMBus systems, and a supply range covering 2 V through 15 V. Because the two buffered sides can use different logic levels, the device can interface I2C buses operating at different voltages. Its 400 kHz operating capability supports standard Fast-mode I2C communication while providing electrical separation between the main bus and the buffered side. The device uses two bidirectional channels identified in manufacturer documentation as Tx/Rx and Ty/Ry, with corresponding Sx and Sy bus-side nodes. Manufacturer guidance states that there are no restrictions on interconnecting Tx/Rx and Ty/Ry I/O pins to other P82B96 devices in star or multipoint arrangements. This flexibility supports bus partitioning in systems with multiple isolated branches or line-card slave devices. Typical applications include separating a main I2C bus from a remote cable segment, translating between different logic voltages, extending an I2C bus to line-card peripherals, and isolating high-capacitance branches from the main bus. The same 8-pin TSSOP footprint is useful for compact industrial, communications, and embedded-control equipment where PCB area is constrained. Designers should account for each side's pull-up resistor network, verify that all attached devices remain compatible with the target I2C mode and voltage levels, and confirm that the selected logic levels satisfy the device's electrical limits. Because the verified excerpts do not provide a complete pin table, capacitance limits, propagation-delay limits, or thermal data, those values should be confirmed in the manufacturer datasheet before release to production. This page combines the verified manufacturer description, distributor availability information, package details, pin-compatible substitute evidence, application guidance, and design considerations to support faster component selection and PCB planning without duplicating the full datasheet.

RFQ پەیوەندی
P82B96TD/S911 - 2-15V 400kHz I2C Bus Buffer | NXP
P82B96TD/S911

P82B96TD/S911 - 2-15V 400kHz I2C Bus Buffer | NXP

The NXP Semiconductors P82B96TD/S911 is a dual bidirectional bus buffer that creates a non-latching logic interface between a conventional I2C bus and other bus configurations operating at different voltage or current levels. The device supports a 2 V to 15 V signal range, a 400 kHz bus rate, and an 8-pin SO surface-mount package. Its bidirectional interface capability makes it suitable for voltage-level translation, bus isolation, and cable extension where system-side and logic-side devices do not share identical electrical limits. An I2C bus buffer is a specialized interface integrated circuit that separates two bus segments while allowing clock and data information to pass in either direction. The P82B96 belongs to the hierarchy of bidirectional bus buffers, logic-level translators, interface ICs, and power-management components designed for robust digital interconnect. Unlike a unidirectional level translator, its non-latching architecture supports two-wire communication in both directions and allows connected devices to recognize bus states across the interface. The principal electrical features include a 2 V to 15 V operating range, a 400 kHz maximum I2C operating frequency, and support for interfaces involving 3.3 V logic, low-current SMBus signaling, and logic levels up to 15 V. The buffered architecture reduces the loading imposed on the upstream bus while providing separate side connections for compatible downstream devices. Its bipolar IC construction is identified directly in the manufacturer documentation. The device is designed to bridge buses that differ in voltage and current requirements rather than merely repeating identical logic levels. NXP identifies examples including 350 µA SMBus signaling, 3.3 V logic devices, and 15 V-level or low-impedance lines. The non-latching behavior is important because it preserves the electrical interpretation of bus signals without introducing a held state when the interface is inactive. Typical uses include I2C bus extension, SMBus isolation, level translation between legacy and modern logic domains, and protection of controller pins from capacitive loading. It can also simplify PCB partitioning by placing the buffer between two bus segments and reducing the distance over which a single segment must operate. The 8-pin SO package supports compact surface-mount layouts in industrial, communications, and embedded equipment. A key design consideration is that buffered sections do not automatically remove every bus-compliance issue. Engineers should verify pull-up values, bus capacitance, rise-time requirements, enable polarity, reference-voltage configuration, and the voltage applied to each side against the manufacturer datasheet. Grounding and trace routing should also keep the buffered bus away from noisy power converters to prevent false start or data corruption. This page combines the manufacturer part information, exact verified package and operating details, ordering references, and practical guidance for selecting and implementing the P82B96TD/S911. It also identifies the verified same-footprint options while clearly separating them from general functional equivalents that have not been confirmed as pin-compatible drop-ins.

RFQ پەیوەندی
PCA6408AHKX - 8-Bit I2C I/O Expander | NXP Semiconductors
PCA6408AHKX

PCA6408AHKX - 8-Bit I2C I/O Expander | NXP Semiconductors

The NXP Semiconductors PCA6408AHKX is an 8-bit I2C-bus and SMBus level-translating I/O expander with interrupt and reset functions, operating at up to 400 kHz and packaged in a 16-pin XQFN measuring 1.8 mm by 2.6 mm. It expands a host controller's available general-purpose input/output count while supporting both standard I2C and SMBus communication. An I/O expander is an interface IC that translates serial bus commands into parallel digital input and output lines. In the system hierarchy, it sits between a microcontroller or embedded processor and external peripherals. The PCA6408AHK family provides eight configurable I/O ports, bidirectional interrupt signaling, and a reset input, making it useful when a controller has insufficient pins for switches, indicators, sensors, or relay-control signals. The principal device features include eight I/O lines, I2C and SMBus support, operation at 100 kHz or 400 kHz, a stated maximum supply voltage of 5.5 V, and level-translating capability. The open-drain interrupt output becomes active when an input state differs from its corresponding input-port register state, allowing the connected controller to respond without continuously polling all eight pins. A dedicated reset input repeats the device's reset and initialization sequence without removing power. The PCA6408AHKX combines a compact 16-pin XQFN package with a serial control interface intended for embedded control systems. Its level-translating architecture allows the I/O port voltage domain to be managed separately from the controller-side interface voltage when configured appropriately. This is particularly useful in systems where a low-voltage processor communicates with peripherals operating at a higher logic voltage, subject to the limits defined in the manufacturer datasheet. Typical uses include industrial control panels, programmable logic controllers, building-automation equipment, battery-powered instrumentation, and compact consumer products. The eight ports can monitor discrete inputs or drive outputs such as status LEDs, relay-enable signals, and mode-selection controls. The interrupt output reduces unnecessary bus traffic when only a change on a monitored input requires controller attention. PCB design should preserve the manufacturer's recommended pin, exposed-pad, decoupling, and layout constraints. Place input and output decoupling capacitors close to their associated supply pins, route the I2C bus with appropriate pull-up resistors, and confirm exposed-pad connection and thermal-via requirements during footprint review. The unusually small 1.8 mm by 2.6 mm body also makes assembly capability and solder-joint inspection important production considerations. This product summary combines the confirmed interface, frequency, voltage, package, interrupt, and reset characteristics with practical guidance for PCB implementation, firmware control, and drop-in upgrade evaluation. It also identifies a directly related Agile I/O implementation for designs that require a pin-to-pin and software-compatible upgrade path.

RFQ پەیوەندی
PCA6416AEVJ - 16-Bit I/O Expander | NXP Semiconductors
PCA6416AEVJ

PCA6416AEVJ - 16-Bit I/O Expander | NXP Semiconductors

The NXP Semiconductors PCA6416AEVJ is a 16-bit I2C-bus and SMBus level-translating I/O expander with interrupt and reset functionality, operating at a maximum bus frequency of 400 kHz and housed in a 24-ball VFBGA package measuring 3 x 3 mm. The device adds 16 general-purpose input or output lines to a host controller without requiring a parallel GPIO port. An I/O expander is a peripheral-controller interface device that extends the number of usable GPIO lines available to a microcontroller, microprocessor, or other bus master. In the product hierarchy, it belongs to the I/O expander and interface-controller family, connects to a serial bus, and translates logic levels between a host and attached digital peripherals. Level translation allows the PCA6416AEVJ to support mixed-voltage systems in which the processor and remote I/O circuitry do not necessarily operate from the same supply voltage. The PCA6416AEV provides 16 independently usable I/O lines and includes an open-drain interrupt output for reporting input-state changes. Its reset input provides a direct way to restore the internal configuration without removing power from the device. The interrupt and reset functions make it useful for systems that need deterministic input monitoring, remote control, or repeatable initialization of expansion outputs. The core I2C and SMBus interface supports communication rates up to 400 kHz. This capability is suitable for connecting slower peripherals such as switches, sensors, display interfaces, relay drivers, and status indicators while preserving a compact serial connection to the host controller. Internal pull-up resistors and bus-fault handling are commonly associated with this device family, although exact implementation details should be confirmed against the manufacturer datasheet before final schematic sign-off. Typical uses include industrial control modules, programmable automation equipment, building-control interfaces, communications equipment, and compact embedded systems where the host processor lacks sufficient GPIO pins. The device is particularly useful when inputs must generate an interrupt instead of requiring continuous polling and when remote outputs must be reinitialized through a hardware reset signal. For PCB design, allocate the VFBGA-24 land pattern and its 24-ball via or pad structure according to the NXP package drawing. Keep I2C routing short, provide the required bypass capacitance at the supply pins, and confirm pull-up values against the bus voltage, capacitance, and bus speed. Because the package is compact, assembly capability, board-flatness requirements, and the number of PCB layers should be reviewed before layout release. This product page combines the NXP family description, package and interface characteristics, qualified replacement information, and practical implementation guidance. It also distinguishes verified pin-to-pin alternatives from functionally similar devices that require a different footprint, helping engineers select a component that can be used without redesigning the assembled PCB.

RFQ پەیوەندی
PCA82C251T - 24V CAN Transceiver, 1MBd, SOIC-8 | NXP
PCA82C251T

PCA82C251T - 24V CAN Transceiver, 1MBd, SOIC-8 | NXP

The NXP PCA82C251T is a legacy CAN (Controller Area Network) bus transceiver that serves as the physical interface between a CAN protocol controller and the differential CAN bus, operating at data rates up to 1 MBd in 24V automotive and industrial systems. Housed in an 8-pin SOIC (SO-8) surface-mount package, it provides differential transmit capability to the bus and differential receive capability to the CAN controller, with full conformance to the ISO 11898-24V standard for 24V systems used in trucks, buses, and heavy industrial vehicles. A CAN transceiver is a physical-layer (PHY) device that converts the single-ended digital transmit (TXD) and receive (RXD) signals from a CAN protocol controller into the differential dominant/recessive signaling required by the CAN bus. It sits between the protocol controller (an MCU with a CAN module) and the twisted-pair bus, providing the drive strength, common-mode rejection, and bus-fault protection needed for robust communication. The PCA82C251 belongs to the broader family of CAN transceivers and is part of the NXP (formerly Philips Semiconductors) automotive connectivity portfolio. Key features of the PCA82C251T include a maximum data rate of 1 MBd, wide supply voltage range of 4.5V to 5.5V (typical 5V), bus terminals tolerant to -27V to +40V transients, low current consumption in standby and recessive states, thermal shutdown protection, and current limiting on the bus outputs. The device operates over the -40C to +125C automotive temperature range, making it suitable for under-hood applications and other harsh industrial environments. It is supplied in the industry-standard 8-pin SOIC (SO-8) package for reflow-soldered surface-mount assembly. The PCA82C251T uses a bipolar CMOS process with on-chip bus-driver protection and slope-control circuitry to limit RFI emissions. Its high-impedance bus input during supply loss prevents the device from loading the bus when unpowered, supporting multi-node hot-swap scenarios. Compared to lower-voltage CAN transceivers, the 24V-tolerant bus pins make this part specifically suited for trucks, buses, agricultural machinery, and industrial CAN networks powered from 24V rails where common-mode transients exceed the range of 12V-only parts. Typical applications include 24V truck and bus CAN networks, agricultural and construction equipment CAN buses, industrial automation CANopen networks, forklift and material-handling vehicle communication, and CAN-based battery management in 24V lead-acid battery stacks. The ISO 11898-24V conformance also makes it a candidate for heavy-duty on-road and off-road vehicle communication backbones. When designing with the PCA82C251T, note that it is a legacy part and the modern TJA1051T, TJA1042T, or TJA1057T from NXP offer lower quiescent current, faster loop times, and improved EMC behavior for new designs. Engineers should select a 24V-rated replacement only when pin-compatibility or bus-fault tolerance is critical; the standard 12V TJA1050T is NOT a drop-in because its bus common-mode range is narrower and will not survive 24V-system transients. This page synthesizes distributor pricing, verified drop-in alternatives (same-brand and cross-brand in SOIC-8), practical design notes, and a parameter comparison table not bundled together on the manufacturer's product page.

RFQ پەیوەندی
PCA82C251T-YM118 - 24V CAN Transceiver, 1Mbps, SOIC-8 | NXP
PCA82C251T-YM118

PCA82C251T-YM118 - 24V CAN Transceiver, 1Mbps, SOIC-8 | NXP

The NXP PCA82C251T-YM118 is a legacy CAN bus transceiver for 24 V systems, providing the physical interface between a CAN protocol controller and the differential CAN bus. Housed in an 8-pin SO (SOIC-8) surface-mount package, it supports data rates up to 1 Mbps and operates from a single 5 V supply (4.5 V to 5.5 V), with bus pins tolerant to ±27 V of common-mode voltage for harsh 24 V automotive and industrial environments. A CAN transceiver (Controller Area Network transceiver) is a physical-layer device that converts the digital transmit/receive logic of a CAN protocol controller into the differential voltage signaling required by the CAN bus standard (ISO 11898). Within the broader system hierarchy, a CAN transceiver sits between the protocol controller (MCU) and the physical wiring harness, and belongs to the family of differential line drivers / interface ICs / wired-connectivity semiconductors. The 82C251 is the third-generation "PCA82C251" device, designed for 24 V truck and bus applications and predates the modern TJA1050 / TJA1042 / TJA1051 family. Key features include ±27 V bus fault protection on CANH and CANL, thermal shutdown with automatic recovery, a current-limited transmitter for short-circuit protection on the bus, and a low-current standby mode (typ. 275 µA supply current per Mouser listing). The differential receiver provides high common-mode rejection, and the driver stage supports slew-rate-limited transmission at speeds up to 1 Mbaud. The device exposes TxD, RxD, VCC, GND, CANH, CANL, Vref, and Rs pins on the SO-8 footprint. The architecture uses a bipolar process optimized for high bus voltage tolerance, with on-chip protection diodes clamping transient voltages beyond the supply rails. The Rs pin selects between high-speed, slope-control, and standby modes, providing a software/hardware mechanism for EMC tuning or low-power operation when the bus is idle. Typical applications include 24 V truck and bus CAN nodes, industrial CANopen networks, automotive body and chassis ECUs, agricultural machinery telemetry, and marine electronics. It is a pin-compatible second-source for the legacy PCA82C251 footprint, useful when modern 12 V TJA parts are not suitable. When designing with this part, place a 100 nF decoupling capacitor close to the VCC pin and use a split termination (60 Ω + 60 Ω + 100 nF to ground) at each end of the CAN bus for proper 24 V signal integrity. The Rs pin mode selection must be configured via a resistor to ground or to VCC; leaving it floating is not recommended. The PCA82C251T is marked NRND by NXP - prefer the TJA1051T or TJA1057T for new designs, but this part remains in production for legacy 24 V applications. This page synthesizes distributor stock, parametric data, drop-in second sources, and application guidance drawn from NXP's PCA82C251 datasheet plus current distributor inventory, not all of which appears in a single manufacturer PDF.

RFQ پەیوەندی
PCA82C251T/N3,118 - 24V CAN Transceiver SOIC-8 | NXP
PCA82C251T-N3118

PCA82C251T/N3,118 - 24V CAN Transceiver SOIC-8 | NXP

The NXP PCA82C251T/N3,118 is the interface between a CAN protocol controller and the physical bus, primarily intended for applications up to 1 MBaud in 24 V truck and bus systems. It provides differential transmit capability to the bus and differential receive capability to the CAN controller and is fully compatible with the ISO 11898-24 V standard. The /N3,118 suffix denotes the SOIC-8 (D-package) tape-and-reel delivery option used for high-volume automated assembly. A CAN transceiver (Controller Area Network transceiver) is a physical-layer IC that converts the digital transmit (TXD) and receive (RXD) signals of a CAN protocol controller into the differential CANH and CANL bus signals, and vice versa. Within the broader hierarchy, a CAN transceiver is a type of bus transceiver, which is a type of interface IC, which sits inside the Interface ICs category of integrated circuits. The PCA82C251 family targets 24 V automotive and industrial systems where high bus robustness and good electromagnetic compatibility are required. Key features include a -27 V to +40 V bus fault tolerance on CANH/CANL, thermal shutdown protection, current limiting on the transmitter outputs, and a slope-control pin that lets the user programme the bus rise/fall time. The IC operates from a single 4.5 V to 5.5 V supply, draws a typical quiescent current of 16 mA in recessive mode, and survives automotive transients on the bus lines. The SOIC-8 plastic package offers a small PCB footprint with a standard 1.27 mm pin pitch. Typical applications include 24 V truck and bus CAN nodes, industrial CANopen networks, agricultural and construction machinery, and any 12 V or 24 V CAN bus node requiring the classic PCA82C251 silicon. The PCA82C251 is the second-generation PCA82C250 follow-on and is widely second-sourced across the industry. Note that NXP has moved this part to NRND (Not Recommended for New Designs) - new designs should evaluate TJA1043, TJA1051, or TJA1042 for similar 24 V capability. When designing with this part, place a 100 nF decoupling capacitor as close as possible to pin 8 (VCC) and follow the ISO 11898 bus termination of 120 Ω at each end of the bus. The slope-control resistor on pin 8 (Rs) must be chosen against the desired bit rate; for 1 MBaud operation NXP recommends tying Rs to ground, while for lower bit rates a larger resistor reduces EMI. This page synthesises distributor stock, drop-in equivalents, and design guidance not found in the standalone datasheet PDF.

RFQ پەیوەندی
PCA82C251T/YM,112 - CAN Transceiver for 24V Systems | NXP
PCA82C251T-YM112

PCA82C251T/YM,112 - CAN Transceiver for 24V Systems | NXP

The NXP Semiconductors PCA82C251T/YM,112 is a legacy Controller Area Network (CAN) transceiver for 24 V systems, supplied in an 8-pin SOIC package (SOT96-1 / SO-8). The device provides a single differential transmit driver and a single differential receiver, providing the physical interface between a CAN protocol controller and the differential CAN bus. It operates from a single 4.5 V to 5.5 V supply, supports data rates up to 1 Mbaud, and is fully compatible with the ISO 11898-24 V standard. What is a CAN transceiver? A CAN transceiver (Controller Area Network transceiver) is a physical-layer interface IC that bridges a digital CAN protocol controller — typically a microcontroller with a built-in CAN module — and the differential CAN bus wiring found in vehicles, industrial equipment, and factory automation systems. Within the broader semiconductor hierarchy, a CAN transceiver belongs to the Interface ICs family, which sits inside the Integrated Circuits product tree. It is the companion IC to a CAN controller, the safety/transceiver side of an automotive/industrial bus, providing the differential drive strength, common-mode tolerance, and bus-fault robustness that digital logic alone cannot deliver. Key features of the PCA82C251T/YM,112 include slope-control to reduce Radio Frequency Interference (RFI), thermal shutdown protection, short-circuit protection on the bus pins, and an exposed thermal pad-friendly SO-8 footprint. The transceiver provides recessive and dominant bus states compliant with ISO 11898-24 V, can detect a permanent dominant condition on the bus, and includes a low-current standby mode controlled via the Rs (slope / standby) pin. The bus pins (CANH, CANL) survive load-dump transients encountered in 12 V and 24 V automotive/industrial environments, making the part the workhorse interface for truck, bus, agricultural, and off-road vehicle networks. Internally, the PCA82C251T/YM,112 uses a bipolar transmitter architecture with a precision differential output stage. The slope-control pin (pin 8) lets the designer trade edge rate against RFI; slower edges reduce emissions on unshielded bus cabling at the cost of maximum achievable bit rate. The receiver compares the bus differential voltage against an internal reference with sufficient hysteresis to reject common-mode noise, and the TXD input feeds a dominant/recessive driver that pulls the bus to the ISO 11898-24 V defined levels. A thermal shutdown block protects the output stage against continuous short circuits on CANH or CANL. Typical applications include in-vehicle CAN networks for trucks, buses and agricultural machinery, industrial automation CAN nodes, building automation (HVAC, lifts), and any 24 V battery-powered CAN segment requiring compliance with ISO 11898-24 V. Designers pair the PCA82C251T/YM,112 with microcontrollers that include a CAN controller (such as NXP LPC, S32K, or Kinetis families) and external protection components (TVS diodes, common-mode chokes) on the bus side. When designing with this transceiver, fit a split-termination network (typically 60 Ω total with a 10 nF to 100 nF capacitor to ground) close to the bus pins to match the cable impedance and improve EMC. Slope-control resistance should be chosen to keep edge times short enough for the target baud rate while still meeting automotive EMC limits. Ensure the supply is decoupled with a 100 nF ceramic capacitor placed within a few millimeters of the VCC pin. This page synthesizes NXP datasheet specifications, distributor pricing as of 2026-10-13, drop-in alternatives (same-brand first, then cross-brand), and practical design notes not found in the standalone datasheet to give engineers an actionable component reference.

RFQ پەیوەندی
PCA8574D,512 - 8-Bit I2C I/O Expander 400kHz SOIC-16 | NXP
PCA8574D,512

PCA8574D,512 - 8-Bit I2C I/O Expander 400kHz SOIC-16 | NXP

The NXP PCA8574D,512 is a remote 8-bit I/O expander for the I2C-bus with interrupt output, providing eight quasi-bidirectional general-purpose I/O lines in a 16-pin SOIC (SO16) package. It operates from a single 2.3V to 5.5V supply, supports the Fast-mode 400 kHz I2C bus, and offers three hardware address pins (A0, A1, A2) plus an open-drain active-low interrupt output. An I2C I/O expander is a type of interface IC that lets a microcontroller control additional digital inputs and outputs through the two-wire serial bus (SCL and SDA), reducing the number of GPIO pins the MCU itself must provide. Within the interface IC hierarchy, the PCA8574 sits alongside I2C multiplexers, port expanders and level translators, and is a direct successor in function to the industry-standard PCF8574. Key features include eight quasi-bidirectional ports that can be independently assigned as inputs or outputs, a 400 kHz I2C-bus interface, low standby current of approximately 10 uA, an latched outputs architecture with power-on reset, and an open-drain INT output that notifies the host of any input change. The quasi-bidirectional I/O structure allows a pin to be used as input or output without direction-control registers, simplifying firmware. The three hardware address pins allow up to eight PCA8574 devices (or eight PCA8574A devices with the alternate fixed slave address) on one bus, supporting up to 16 expanders and 128 I/Os, for example 128 LEDs, from a single two-wire bus. Latched outputs directly drive LEDs with high current sink capability. Typical applications include keypads and switch matrices, LED and indicator driving in white goods and industrial control panels, SPDT relay expansion, sensor monitoring in battery-powered products, and remote I/O expansion in automotive body electronics. For design, remember the quasi-bidirectional ports sink strongly but source only weakly (approximately 100 uA at VDD = 5V), so use external pull-ups on input lines and drive LEDs in sink mode. This page synthesizes distributor pricing, verified drop-in alternatives, practical design notes, and EOL lifecycle guidance not found in the manufacturer datasheet alone.

RFQ پەیوەندی
PCA8574D-T - 8-Bit I2C I/O Expander 400kHz | NXP
PCA8574D-T

PCA8574D-T - 8-Bit I2C I/O Expander 400kHz | NXP

The NXP PCA8574D-T is a remote 8-bit I/O expander for the I2C-bus with interrupt output, housed in a 16-pin SO16 (SOIC) package, operating at up to 400 kHz Fast-mode I2C. It provides general-purpose quasi-bidirectional I/O expansion for most microcontroller families via the two-line bidirectional I2C-bus (serial clock SCL and serial data SDA). An I/O expander is a type of interface IC within the broader hierarchy of interface and connectivity semiconductors. It allows a microcontroller with limited GPIO pins to control additional digital inputs and outputs over just two bus lines, reducing pin count, board space, and wiring complexity. I/O expanders are common companions to MCUs such as those from NXP, STMicroelectronics, and Microchip in embedded systems. Key features of the PCA8574D include an 8-bit quasi-bidirectional port with latched outputs, an open-drain interrupt (INT) output that alerts the host controller to remote input changes, and three hardware address pins (A0, A1, A2) that allow up to eight PCA8574 devices on the same I2C-bus. Combined with the PCA8574A variant (different fixed slave address), up to 16 devices can share one bus, supporting up to 128 I/Os, for example driving 128 LEDs. Architecturally, the device integrates an 8-bit quasi-bidirectional I/O port, an I2C-bus slave interface with Fast-mode 400 kHz support, and power-on reset logic that sets all ports to a defined state at startup. The quasi-bidirectional structure means each pin can serve as input or output without a direction-control register, simplifying firmware. Typical applications include keypad scanning and keyboard interfaces, LED and indicator driving, backplane status monitoring in industrial systems, and general-purpose GPIO expansion in automotive body electronics and consumer appliances. Design consideration: quasi-bidirectional pins source a weak holding current when set high, so external loads must sink current to pull a pin low; check sink capability per the manufacturer datasheet before driving heavier loads. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
PCA8575PW,118 - 16-bit I2C I/O Expander TSSOP-24 | NXP
PCA8575PW,118

PCA8575PW,118 - 16-bit I2C I/O Expander TSSOP-24 | NXP

The NXP Semiconductors PCA8575PW,118 is a remote 16-bit I/O expander for the I2C-bus (SCL/SDA), providing a 16-bit quasi-bidirectional parallel port and an interrupt output, housed in a 24-pin TSSOP (4.4 mm body width) surface-mount package and supplied on Digi-Reel. The device supports a supply range of 2.3 V to 5.5 V and operates at an I2C clock frequency up to 400 kHz (Fast-mode), making it drop-in compatible with the wide majority of 3.3 V and 5 V microcontroller I2C peripherals. An I/O expander is a bus-attach peripheral that multiplies a host controller's general-purpose I/O count by adding parallel input/output pins over a serial link. The PCA8575PW,118 belongs to the I2C-bus I/O expander family (I/O expander -> GPIO expander -> parallel I/O port -> interface IC -> integrated circuit). Quasi-bidirectional outputs can be driven low actively by the device or pulled high weakly, which lets a single pin directly sink LED current when configured as an output and still be read as a logic high when the external driver releases the line - useful for keypad scanning and switch-matrix polling. Key features include 16 individually addressable I/O lines, an open-drain interrupt (INT) line that asserts when any input changes state, three hardware address pins (A0/A1/A2) allowing up to eight devices on one bus (128 I/O total), latched outputs with high-current drive capability suitable for direct LED driving, and a low standby current that suits battery-powered designs. The integrated address decoder, input filter, and edge-triggered interrupt block reduce host firmware overhead because the MCU only services the PCA8575PW,118 when an actual port event occurs. Typical applications include adding pushbuttons, keypads, LED indicators, relay drivers, and sensor multiplexing to 8-pin microcontrollers, white-goods and appliance front panels, industrial PLC I/O modules, and PC accessory sideband ports. The 400 kHz Fast-mode I2C clock and 2.3 V to 5.5 V supply let it interface directly with 3.3 V ARM Cortex-M parts and 5 V legacy MCUs without level translation. When designing with this device, place the standard 100 nF VCC bypass within 5 mm of the supply pin and add 10 kohm pull-ups on SDA and SCL - quasi-bidirectional outputs still require external pull-ups to drive logic high reliably. Reserve the INT pin for an MCU edge-triggered input and avoid tying it permanently high; the address pins A0-A2 must be tied to a fixed logic level and not left floating at power-up. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the NXP datasheet alone, including the comparison and pinout data that engineering teams need to qualify a second source.

RFQ پەیوەندی
PCA9306H - Dual I2C/SMBus Voltage-Level Translator | TI
PCA9306H

PCA9306H - Dual I2C/SMBus Voltage-Level Translator | TI

The Texas Instruments PCA9306H is a dual bidirectional I2C-bus and SMBus voltage-level translator with an enable (EN) input, operating from 1.2 V to 3.3 V on VREF1 and 1.8 V to 5.5 V on VREF2, housed in an 8-pin VSSOP (DCT) package. It translates between two voltage domains without a direction pin, making it a compact solution for mixed-voltage I2C and SMBus networks. A voltage-level translator is an interface IC that safely connects digital signals operating at different supply voltages, for example a 1.8 V microcontroller I2C peripheral talking to a 3.3 V or 5 V sensor. Within the signal-chain hierarchy, the PCA9306H belongs to the level-translator family of interface ICs, positioned alongside I2C buffers, repeaters, and multiplexers. Because I2C is an open-drain bus, translation requires a bidirectional pass element rather than a directional buffer - exactly the architecture this device implements. Key features include directionless bidirectional translation, an enable pin that puts both switch channels into a high-impedance state when LOW, and low ON-state resistance of the pass FET, which keeps propagation delay minimal. The wider VREF1 range of the PCA9306H (1.2 V to 3.3 V, versus 1.0 V to 3.6 V or lower-floor variants in the family) makes it suitable for modern low-voltage processors. It supports standard-mode (100 kHz), fast-mode (400 kHz), and fast-mode plus (1 MHz) I2C devices as well as SMBus systems. Architecturally, the device is a pair of N-channel pass transistors with gate drive referenced to EN and the reference supplies. When EN is HIGH, SDA1/SCL1 connect to SDA2/SCL2; pulling either side low through its open-drain pull-up propagates the low to the other side, achieving the gate-threshold offset that produces the voltage shift. Because there is no active buffering, signal integrity is essentially transparent, with propagation delay dominated only by the switch Ron and external pull-up resistors. Typical applications include connecting 1.8 V MCUs to 3.3 V or 5 V sensors and EEPROMs, translating between 3.3 V SMBus hosts and lower-voltage peripherals in servers and networking cards, and interfacing low-voltage FPGA or SoC I2C banks to 5 V legacy buses in industrial control systems. For reliable operation, size the pull-up resistors on both sides of the translator according to the bus speed and bus capacitance; each side must have its own pull-up. Also note the 200 kOhm internal pass-gate resistance behavior at low VREF2 voltages when calculating rise times. This page synthesizes distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
PCA9306USG - Dual I2C/SMBus Voltage-Level Translator | onsemi
PCA9306USG

PCA9306USG - Dual I2C/SMBus Voltage-Level Translator | onsemi

The onsemi PCA9306USG is a dual bidirectional I2C-bus and SMBus voltage-level translator with an enable (EN) input, operating from 1.2 V to 3.3 V VREF1 and 1.8 V to 5.5 V VREF2, delivering 1.5 ns typical propagation delay and 3.5 ohm ON-state resistance in an 8-pin VSSOP (US8) package. A voltage-level translator is an interface IC that allows devices operating at different supply voltages - for example a 1.8 V microcontroller and a 5 V sensor - to share the same two-wire bus safely. Within the signal-chain hierarchy, level translators sit in the interface IC family alongside I2C multiplexers, buffers, and repeaters. The PCA9306 belongs to the switch-based (passive) translator class: it uses two N-channel pass transistors per channel rather than active output stages, so the bus is pulled up naturally by the resistors on each rail. Key features include bidirectional voltage translation between 1.2 V and 5 V with no direction pin, support for Standard-mode (100 kbps), Fast-mode (400 kbps), and Fast-mode Plus (1 Mbps) I2C-bus plus SMBus operation, a very low 3.5 ohm ON-state connection that minimizes signal distortion, and an active-high EN input that isolates both buses when the translator is not needed. The 1.5 ns rise/fall propagation characteristic keeps bus timing margin intact even at Fast-mode Plus speeds. The switch architecture means the PCA9306 introduces virtually no drive strength of its own - the 64 mA figure refers to the pass-transistor current handling capability. Because it is a passive switch, lock-up free operation is guaranteed even during bus contention or partial power-down, a known failure mode of active level-shifter designs. Both SDA and SCL channels are identical, so the device handles the full 2-bit I2C bus in a single package. Typical applications include connecting 1.8 V to 3.3 V microcontrollers to 5 V I2C sensors and EEPROMs, level-shifting SMBus rails in server power supplies, battery-powered portable systems where two rail domains must communicate, and mixed-voltage industrial control modules. Design consideration: the EN pin must be driven above the higher VREF2 rail to guarantee the pass gates turn fully on; always provide pull-up resistors on both sides of each channel sized for the respective rail. This page synthesizes distributor cross-reference data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pricing as of 2026-10-19.

RFQ پەیوەندی
PCA9500BSHP - 8-Bit I/O Expander with 2-kbit EEPROM | NXP
PCA9500BSHP

PCA9500BSHP - 8-Bit I/O Expander with 2-kbit EEPROM | NXP

NXP PCA9500BSHP is an 8-bit I2C-bus and SMBus I/O expander with an integrated 2-kbit EEPROM, a 400 kHz bus interface, and a 3.6 V supply rating. The device is offered in a 16-pin HVQFN exposed-pad package for surface-mount designs. Its eight quasi-bidirectional I/O pins can be configured independently as inputs or outputs. An I/O expander is an interface IC that increases the number of general-purpose input/output pins available to a host controller. The PCA9500BSHP sits between an I2C or SMBus controller and external board resources, allowing a processor with limited pin capacity to monitor input states or activate indicator and control devices. In the hierarchy of electronic components, it is an interface IC, a serial bus peripheral, and a port expander. The PCA9500BSHP combines three functions in one device: eight quasi-bidirectional GPIO lines, an I2C-bus or SMBus host interface, and 2 kbits of onboard EEPROM. Each GPIO can be assigned independently for input or output operation. This flexibility supports status monitoring, pushbutton or switch inputs, LED control, relay-control signals, and other board-level digital functions without requiring a dedicated GPIO pin on the host microcontroller. The integrated EEPROM provides 256 bytes of nonvolatile storage because 2 kbits divided by eight equals 256 bytes. It can be used for board identification, configuration values, calibration constants, or other small records that must survive power removal. The manufacturer identifies the device as compatible with I2C and SMBus operation up to 400 kHz, supporting common embedded serial-bus systems. PCA9500BSHP is particularly useful in embedded control and industrial equipment where a base controller needs additional digital interface lines. Typical uses include front-panel LED and switch handling, programmable relay interfaces, sensor and alarm inputs, compact automation controllers, and embedded accessory boards. NXP also identifies the device as supporting hot insertion for removable cards in backplane systems. The 16-pin HVQFN exposed-pad package makes the device appropriate for compact surface-mount assemblies, but the exposed pad requires deliberate PCB thermal and layout design. Use the manufacturer pin-description table when assigning tracks and confirm the exact package drawing, terminal numbering, pad dimensions, and exposed-pad connection before layout release. This page organizes the PCA9500BSHP interface, package, EEPROM, bus-rate, and application information with comparison guidance and practical integration notes. It also separates verified device functions from replacement considerations so engineers can assess PCB compatibility before approving a substitute.

RFQ پەیوەندی
PCA9500D - 8-Bit I/O Expander with EEPROM | NXP
PCA9500D

PCA9500D - 8-Bit I/O Expander with EEPROM | NXP

NXP Semiconductors PCA9500D is an 8-bit I2C and SMBus I/O port expander with an onboard 2-kbit EEPROM, eight quasi-bidirectional GPIO pins, and operation up to 400 kHz in a 16-pin SOIC package. The expander adds remote status inputs and indicator or control outputs to a host microcontroller while preserving the familiar I2C two-wire interface. An I2C I/O expander is a bus-interface peripheral that converts serial commands from a controller into parallel digital states. In the broader hierarchy, it belongs to interface ICs, digital I/O control, and general-purpose bus peripherals. The PCA9500D combines an 8-bit quasi-bidirectional port with nonvolatile storage, allowing configuration or board-identification data to be retained between power cycles. The three address pins use internal pull-up resistors, allowing up to eight devices to share the common I2C bus. The GPIO address matches the PCF8574, while the EEPROM address matches the PCF8582C-2; consequently, one device appears as two separately addressed functions to the bus master. Its 400 kHz bus rating supports faster communication than the common 100 kHz I2C operating mode. Because each port pin can be assigned independently as an input or output, the device can monitor board-level status and activate indicators such as LEDs. The quasi-bidirectional structure is useful for straightforward bus interfacing, although external pull-ups, electrical-level compatibility, and the intended input or output state must be considered in each design. Typical uses include industrial control boards, removable or backplane cards, LED and switch interfaces, configuration storage, and small embedded systems where GPIO conservation is valuable. The NXP product information specifically identifies hot-insertion support as useful in removable-card and backplane systems. A correct implementation should verify the actual device address, EEPROM map, logic thresholds, pull-up values, and pin functions against the manufacturer datasheet. Do not infer unavailable timing, voltage, temperature, or package dimensions from distributor summaries. For exact design values, consult the linked NXP documentation and validate firmware behavior across power-up, reset, bus faults, and hot-plug conditions.

RFQ پەیوەندی
PCA9500PW - 8-Bit I/O Expander with 2-kbit EEPROM | NXP
PCA9500PW

PCA9500PW - 8-Bit I/O Expander with 2-kbit EEPROM | NXP

The NXP Semiconductors PCA9500PW is an 8-bit I2C-bus and SMBus I/O port expander with an integrated 2-kbit EEPROM in a 16-pin TSSOP package. It operates from 2.5 V to 3.6 V, supports I2C/SMBus communication up to 400 kHz, and provides eight quasi-bidirectional data pins that can be configured independently as inputs or outputs. Three hardware address pins allow as many as eight PCA9500 devices to share one bus. According to the NXP datasheet, the bus master sees the GPIO controller and EEPROM as two separate devices, while the GPIO configuration register is accessed in a manner similar to the PCF8574. An I/O expander is a general-purpose interface IC that increases the number of digital input and output lines available to a host microcontroller without requiring a large parallel GPIO package. In the product hierarchy, the PCA9500 is an I/O expander within the broader category of interface ICs and bus-interface semiconductors. Its quasi-bidirectional ports can read external logic states or drive indicators and other digital loads, making it useful when the main processor has too few general-purpose pins for switches, sensors, LEDs, or control signals. The principal feature is the integrated 2-kbit EEPROM, which adds a small amount of nonvolatile storage for configuration or identification data. The eight GPIO pins support mixed input/output operation, and the three address inputs expand the device count available on a shared I2C or SMBus system. A maximum bus rate of 400 kHz is suitable for standard embedded control buses, while the 2.5 V to 3.6 V supply range targets conventional low-voltage digital systems. The NXP datasheet identifies the PCA9500 as a drop-in replacement for the PCF8574, adding EEPROM functionality to a familiar interface arrangement. The PCA9500 uses the same basic I2C write/read model commonly associated with PCF8574-style devices. Separate device addresses allow the GPIO function and the EEPROM to be accessed independently by the bus master. This separation is useful when the host must read or update stored data without changing live output states. Quasi-bidirectional inputs include an internal pull-up arrangement, making the device convenient for open-drain-style bus signaling and for reading switches or logic states, although external pull-up and drive-strength checks remain important in the final circuit. Typical applications include consolidating LED indicators, reading banks of switches or interlocks, adding configurable control outputs to a microcontroller module, and storing board configuration or asset information in the EEPROM. It can also reduce controller pin count in compact embedded systems while preserving a standard I2C/SMBus connection. Eight address-selectable devices provide substantial expansion without requiring additional host pins. The primary design consideration is to treat the quasi-bidirectional pins as a bidirectional interface rather than as unrestricted push-pull outputs. Check pull-up strength, voltage levels, bus capacitance, and the timing requirements of every connected peripheral. Confirm the PCB land pattern and pin numbering against the manufacturer datasheet before production because the verified product information does not provide a complete public pin table in the supplied material. This page consolidates the verified NXP product information, distributor identification, lifecycle status, bus characteristics, and manufacturer-backed drop-in relationships into an engineering-focused resource. It also distinguishes verified capabilities from parameters that still require confirmation from the full manufacturer datasheet.

RFQ پەیوەندی
PCA9501D - 8-Bit I2C I/O Expander with 2-kbit EEPROM | NXP
PCA9501D

PCA9501D - 8-Bit I2C I/O Expander with 2-kbit EEPROM | NXP

The NXP PCA9501D is an 8-bit I2C-bus and SMBus I/O port expander with an on-board 2-kbit EEPROM, a dedicated interrupt output and six hardware address pins, supplied in a 20-pin SO (SOIC-20) surface-mount package. An I/O expander (also called a GPIO expander or port expander) is a level-shifting serial-to-parallel interface device that converts a two-wire I2C-bus connection into a bank of individually addressable digital input/output lines. The PCA9501D sits in the hierarchy I/O expander > bus interface IC > interface IC > integrated circuit, and it is designed for designers who have run out of GPIO pins on a microcontroller, logic device or field-programmable gate array and need additional lines without growing the pin count of the main device. Key features include 8 quasi-bidirectional I/O lines (P0 through P7), an on-board 2-kbit serial EEPROM that the bus master can read and write independently of the I/O port, 6 hardware address pins that allow up to 64 PCA9501 devices to share one I2C bus, and an open-drain interrupt output that alerts the host when any input line changes state. The device operates on the standard I2C/SMBus ecosystem at up to 400 kHz, so it pairs directly with NXP microcontrollers, 3.3 V and 5 V logic families, and energy-harvesting or sensor-hub designs. Internally, the PCA9501D combines a 256-byte EEPROM array with the parallel port register set. The port lines default to high-impedance inputs and can be reconfigured individually as inputs or quasi-bidirectional outputs with an internal pull-up, which allows a single pin to read a switch and still sink current when driven low. Because the EEPROM is accessed through the same bus as the GPIO register, the bus master sees two separate I2C addresses for one physical device, and the interrupt pin removes the need for continuous polling of slow-changing inputs. Typical uses include reading banks of push buttons and configuration DIP switches, driving discrete LEDs, relay or solenoid drivers, and level shifters, adding status indicators on industrial control boards, and storing calibration or configuration data in EEPROM without spending a separate memory chip. It is also a common substitute for the PCF8574 in designs that want EEPROM and interrupt support added. When laying out the board, keep the SDA and SCL traces short, pull both lines up with a resistor in the range of 2.2 kOhm to 10 kOhm, and treat all address pins as static straps that must be tied to VDD or ground before the device is addressed. Confirm the total pull-up budget on the bus so that several expanders can share the same pair of lines.

RFQ پەیوەندی
PCA9501PW - 8-Bit I/O Expander with 2-kbit EEPROM | NXP
PCA9501PW

PCA9501PW - 8-Bit I/O Expander with 2-kbit EEPROM | NXP

NXP Semiconductors PCA9501PW is an 8-bit I2C and SMBus I/O expander with an integrated 2-kbit EEPROM, eight independently configurable quasi-bidirectional GPIO pins, and support for bus operation up to 400 kHz. The device is supplied in a 20-pin TSSOP package and is designed for 2.5 V to 3.6 V operation. An I/O expander is an interface IC that increases the number of digital input and output pins available to a host microcontroller or embedded processor. The PCA9501 sits within the interface IC hierarchy, where it connects a serial I2C or SMBus controller to LEDs, switches, sensors, and other board-level logic. Its quasi-bidirectional outputs can read external logic states while also driving indicator and control devices. The PCA9501 provides eight GPIO ports, a 2-kbit on-board EEPROM, an interrupt output, and six hardware address inputs. The EEPROM provides nonvolatile storage alongside the GPIO function, allowing the bus master to retain configuration or identification data. Hardware address pins allow up to 64 PCA9501 devices to coexist on one bus when address assignments and bus loading permit. The I2C and SMBus interfaces support operation at frequencies up to 400 kHz. Each GPIO may be configured independently as an input or output, and the input data and output configuration registers follow the familiar programming model of the PCF8574 family. The interrupt pin provides a hardware indication that one or more inputs have changed, reducing the need for continuous polling. Typical uses include LED and relay-control interfaces, configuration and status I/O, telecommunications equipment, networking hardware, base-station systems, and general-purpose expansion for installed boards. The integrated EEPROM also makes the device useful where a small amount of nonvolatile board data must accompany the I/O functions. Designers should account for the electrical behavior of quasi-bidirectional ports, pull up I2C and open-drain interrupt lines as required, and verify logic thresholds before driving external loads. PCB layouts should route the bus cleanly, provide stable bypass capacitance near the supply pins, and maintain adequate spacing between the TSSOP body and adjacent copper features. This page combines the verified NXP product information, manufacturer datasheet, distributor listing, and cross-reference results with practical guidance on pin behavior, bus addressing, interrupt handling, EEPROM use, PCB layout, and drop-in replacement assessment.

RFQ پەیوەندی
PCA9507D - 400kHz 2-Wire I2C Bus Extender | NXP
PCA9507D

PCA9507D - 400kHz 2-Wire I2C Bus Extender | NXP

The NXP Semiconductors PCA9507D is a dual-supply, bidirectional 2-wire serial-bus extender with a 400 kHz operating frequency in an 8-pin SOIC package. It provides 3.3 V to 5 V level shifting, buffers the SDA and SCL data paths, and extends an I2C, SMBus, or HDMI DDC bus by as much as 18 meters. An I2C bus extender is an interface IC that preserves two-wire serial communication across a physical distance or voltage boundary. The PCA9507D belongs to the I2C interface-controller and signal-buffer hierarchy: it supports the I2C-bus system while providing bidirectional buffering for both SDA and SCL. Its dual-supply architecture lets the two sides of the bus operate at different logic levels, making the device useful when a downstream circuit uses a voltage outside the source-side range. The primary features include 3.3 V to 5 V level shifting, operation up to 400 kHz, and bus extension to 18 meters. Bidirectional buffering is important because I2C and SMBus use open-drain signaling in which pull-up resistors, rather than the active driver, establish the high state. The PCA9507D accommodates that topology without changing the basic operating modes of the two-wire bus. Technically, the device separates the source-side and destination-side signal paths while preserving clock and data behavior. This arrangement can maintain communication between circuit boards or cable-linked equipment where direct capacitance, voltage incompatibility, or bus-length limitations would otherwise degrade signal integrity. Its 400 kHz frequency class supports moderate-speed control, configuration, and status buses rather than high-bandwidth data transfer. Typical applications include extending HDMI Display Data Channel connections between a source and display, isolating I2C control lines across equipment boundaries, lengthening SMBus communication paths, and adapting 3.3 V logic to a 5 V peripheral. The SOIC-8 package also supports conventional surface-mount assembly and compact two-sided PCB layouts. Designers should use the pin-description and application diagrams in the NXP manufacturer datasheet when assigning pull-up resistors, supply connections, and signal routing. Place the device near the physical midpoint of a long extension rather than at only one end, because its intended benefit depends on buffering the two bus segments and isolating their loading. Confirm that both bus speeds, voltage domains, rise times, and pull-up arrangements meet the device and system requirements. This page combines the manufacturer’s bus-extension capabilities with practical placement guidance, sourcing paths, and verified drop-in alternatives. It is intended to help engineers determine whether the PCA9507D solves the specific level-shifting, distance, or loading constraint in an I2C, SMBus, or HDMI DDC design.

RFQ پەیوەندی