بەرهەمەکان (5,100+)

SI2404-D-FS 56kbps ISOmodem IC | Skyworks | 16-SOIC
SI2404-D-FS

SI2404-D-FS 56kbps ISOmodem IC | Skyworks | 16-SOIC

Skyworks Solutions SI2404-D-FS is a system-side ISOmodem data-communications IC supporting 2,400 bps operation and modem formats including V.21, V.22, V.23, V.29, Bell 103, and Bell 212A in a 16-pin SOIC package. The related SI2404 family supports communication rates extending from 2,400 bps to the V.92 class at 56,000 bps when paired with an appropriate line-side companion device. An ISOmodem is a modem controller integrated circuit designed for data communication over telephone, analog, or other limited-bandwidth connections. It combines modulation, data handling, call-control signaling, and line-interface functions into a compact device. A system-side ISOmodem normally works with a line-side counterpart, allowing the two devices to divide the functions required for a complete analog data modem connection. The SI2404-D-FS supports the principal V-series and Bell modem formats identified in the manufacturer documentation, including V.21, V.22, V.23, V.29, Bell 103, and Bell 212A. Related family documentation also identifies V.44, V.42, V.42bis, MNP2-5, automatic rate negotiation, Fast Connect, and Type I and Type II caller-ID decoding. These capabilities make the family applicable to legacy data equipment, embedded communication modules, fax systems, and industrial interfaces requiring standards-compatible modem signaling. As a 2.4 kbps system-side modem IC, the SI2404-D-FS emphasizes compact implementation and compatibility with established modem protocols. Its 16-pin SOIC package provides a small surface-mount footprint, while the protocol mix allows operation with older terminals, fax machines, remote-management equipment, and telephone-network interfaces. The maximum 56,000 bps family capability depends on the selected line-side companion and does not mean that every operating mode of the SI2404-D-FS itself runs at that rate. Typical implementations include embedded analog modems, fax-modem modules, industrial remote terminals, point-of-sale equipment, telecommunications test equipment, and legacy data-collection systems. In each application, the correct line-side IC, isolation boundary, analog termination, and network interface must be selected together because the SI2404-D-FS represents the system-side portion of the modem chipset. When laying out the PCB, place the SI2404-D-FS close to the companion modem and analog-network interface components. Follow the manufacturer pin-description table for supply, ground, clock, control, and analog connections, and preserve the specified decoupling arrangement. Component population and timing values should be selected from the SI2404 family documentation rather than estimated from unrelated modem designs. This page combines protocol identification, package and rate details, drop-in comparison guidance, and practical integration notes to accelerate component selection. Review the complete SI2404 family datasheet and your system-level modem requirements before releasing a production design.

RFQ پەیوەندی
SI2404-D-FSR 56kbps ISOmodem IC | Skyworks | 16-SOIC (Tape & Reel)
SI2404-D-FSR

SI2404-D-FSR 56kbps ISOmodem IC | Skyworks | 16-SOIC (Tape & Reel)

Skyworks Solutions SI2404-D-FSR is a system-side ISOmodem data-communications IC supporting 2,400 bps operation and modem formats including V.21, V.22, V.23, V.29, Bell 103, and Bell 212A in a 16-pin SOIC package. The related SI2404 family supports communication rates extending from 2,400 bps to the V.92 class at 56,000 bps when paired with an appropriate line-side companion device. An ISOmodem is a modem controller integrated circuit designed for data communication over telephone, analog, or other limited-bandwidth connections. It combines modulation, data handling, call-control signaling, and line-interface functions into a compact device. A system-side ISOmodem normally works with a line-side counterpart, allowing the two devices to divide the functions required for a complete analog data modem connection. The SI2404-D-FSR supports the principal V-series and Bell modem formats identified in the manufacturer documentation, including V.21, V.22, V.23, V.29, Bell 103, and Bell 212A. Related family documentation also identifies V.44, V.42, V.42bis, MNP2-5, automatic rate negotiation, Fast Connect, and Type I and Type II caller-ID decoding. These capabilities make the family applicable to legacy data equipment, embedded communication modules, fax systems, and industrial interfaces requiring standards-compatible modem signaling. As a 2.4 kbps system-side modem IC, the SI2404-D-FSR emphasizes compact implementation and compatibility with established modem protocols. Its 16-pin SOIC package provides a small surface-mount footprint, while the protocol mix allows operation with older terminals, fax machines, remote-management equipment, and telephone-network interfaces. The maximum 56,000 bps family capability depends on the selected line-side companion and does not mean that every operating mode of the SI2404-D-FSR itself runs at that rate. Typical implementations include embedded analog modems, fax-modem modules, industrial remote terminals, point-of-sale equipment, telecommunications test equipment, and legacy data-collection systems. In each application, the correct line-side IC, isolation boundary, analog termination, and network interface must be selected together because the SI2404-D-FSR represents the system-side portion of the modem chipset. When laying out the PCB, place the SI2404-D-FSR close to the companion modem and analog-network interface components. Follow the manufacturer pin-description table for supply, ground, clock, control, and analog connections, and preserve the specified decoupling arrangement. Component population and timing values should be selected from the SI2404 family documentation rather than estimated from unrelated modem designs. This page combines protocol identification, package and rate details, drop-in comparison guidance, and practical integration notes to accelerate component selection. Review the complete SI2404 family datasheet and your system-level modem requirements before releasing a production design.

RFQ پەیوەندی
SI2404-D-FT - 2.4 kbps ISOmodem IC | Skyworks Solutions
SI2404-D-FT

SI2404-D-FT - 2.4 kbps ISOmodem IC | Skyworks Solutions

The Skyworks Solutions SI2404-D-FT is a 2.4 kbps ISOmodem system-side modem IC with SPI and UART interfaces, packaged in a 24-pin TSSOP. It supports V.21, V.22, V.23, V.29, Bell 103, and Bell 212A data-modem formats, providing a compact interface for legacy data-communication equipment. An ISOmodem is a dedicated integrated-circuit implementation of the signaling and data functions historically handled by a complete analog modem. The system-side position of the SI2404-D-FT means it works with a complementary line-side or host interface arrangement. This device belongs to the broader modem IC, network controller and processor, interface IC, and semiconductor product hierarchy. The SI2404-D-FT combines a maximum 2.4 kbps data rate with support for several ITU-T and Bell modem standards. Its SPI and UART interfaces allow a host processor to configure the modem and exchange framed data. A 4.92 MHz operating frequency, 3.3 V supply, and wake-up function are also identified for this device, making it suitable for embedded systems that need controlled low-power operation. The 24-pin TSSOP package provides a surface-mount implementation suitable for compact communications equipment. Comparison information identifies a 0.65 mm pitch, a maximum body height of 1.2 mm, and a 7.8 mm overall span. Commercial temperature operation extends to 70°C, while RoHS compliance is reported for the matched TSSOP-24 comparison. Typical uses include embedded fax and data terminal equipment, caller-ID reception, point-to-point serial links, industrial telemetry, and legacy telephone-network equipment. Supporting multiple modem standards allows one hardware platform to interoperate with endpoints using V.21, V.22, V.23, V.29, Bell 103, or Bell 212A signaling rather than limiting operation to one protocol. Designers should confirm the required line-side and system-side circuit arrangement, external interface timing, crystal or clock requirements, and termination values against the manufacturer datasheet before layout. The SPI and UART signals should be routed away from sensitive telephone-line inputs, with grounding and return paths arranged to reduce coupling between the modem and host interfaces. This page organizes the SI2404-D-FT specifications, practical application context, compatibility comparisons, and design guidance to help engineers evaluate this 2.4 kbps modem IC before integrating it into a communications system.

RFQ پەیوەندی
SI2404-D-FTR - 2.4 kbps ISOmodem IC | Skyworks Solutions (Tape & Reel)
SI2404-D-FTR

SI2404-D-FTR - 2.4 kbps ISOmodem IC | Skyworks Solutions (Tape & Reel)

The Skyworks Solutions SI2404-D-FTR is a 2.4 kbps ISOmodem system-side modem IC with SPI and UART interfaces, packaged in a 24-pin TSSOP. It supports V.21, V.22, V.23, V.29, Bell 103, and Bell 212A data-modem formats, providing a compact interface for legacy data-communication equipment. An ISOmodem is a dedicated integrated-circuit implementation of the signaling and data functions historically handled by a complete analog modem. The system-side position of the SI2404-D-FTR means it works with a complementary line-side or host interface arrangement. This device belongs to the broader modem IC, network controller and processor, interface IC, and semiconductor product hierarchy. The SI2404-D-FTR combines a maximum 2.4 kbps data rate with support for several ITU-T and Bell modem standards. Its SPI and UART interfaces allow a host processor to configure the modem and exchange framed data. A 4.92 MHz operating frequency, 3.3 V supply, and wake-up function are also identified for this device, making it suitable for embedded systems that need controlled low-power operation. The 24-pin TSSOP package provides a surface-mount implementation suitable for compact communications equipment. Comparison information identifies a 0.65 mm pitch, a maximum body height of 1.2 mm, and a 7.8 mm overall span. Commercial temperature operation extends to 70°C, while RoHS compliance is reported for the matched TSSOP-24 comparison. Typical uses include embedded fax and data terminal equipment, caller-ID reception, point-to-point serial links, industrial telemetry, and legacy telephone-network equipment. Supporting multiple modem standards allows one hardware platform to interoperate with endpoints using V.21, V.22, V.23, V.29, Bell 103, or Bell 212A signaling rather than limiting operation to one protocol. Designers should confirm the required line-side and system-side circuit arrangement, external interface timing, crystal or clock requirements, and termination values against the manufacturer datasheet before layout. The SPI and UART signals should be routed away from sensitive telephone-line inputs, with grounding and return paths arranged to reduce coupling between the modem and host interfaces. This page organizes the SI2404-D-FTR specifications, practical application context, compatibility comparisons, and design guidance to help engineers evaluate this 2.4 kbps modem IC before integrating it into a communications system.

RFQ پەیوەندی
SI2404-D-GT - 2.4 kbit/s Global DAA Modem | Skyworks
SI2404-D-GT

SI2404-D-GT - 2.4 kbit/s Global DAA Modem | Skyworks

Skyworks Solutions Inc. SI2404-D-GT is a 2.4 kbit/s integrated modem and global data access arrangement (DAA) supporting V.21, V.22, V.23, V.29, Bell 103, and Bell 212A protocols. The device is offered in a 24-pin TSSOP surface-mount package for compact telecommunications and data-communication equipment. A modem IC converts digital data into an analog signaling format suitable for transmission over a communications channel, and a global DAA provides the interface between that modem and the line or external analog network. The SI2404-D-GT integrates these functions into one package, reducing the component count and board area required for conventional data-communication terminals, modem cards, and embedded communication modules. The SI2404-D-GT supports six identified modulation and signaling protocols: V.21, V.22, V.23, V.29, Bell 103, and Bell 212A. Its nominal 2.4 kbit/s data rate makes it appropriate for legacy asynchronous and synchronous communications, terminal equipment, remote data access, and industrial systems that must interoperate with established modem standards rather than broadband data rates. Housed in a 24-pin TSSOP package, the SI2404-D-GT is intended for surface-mount PCB assembly. The package provides a compact footprint for equipment where connector area and board height are constrained. Detailed electrical limits, interface timing, clock requirements, and line-side implementation guidance should be confirmed against the manufacturer datasheet before schematic capture. Typical uses include legacy data-terminal equipment, point-of-sale systems, industrial data-collection terminals, embedded modem modules, and communications equipment bridging digital logic to analog lines. Designers can select the protocol configuration required by the connected network and use the integrated DAA to reduce the number of external interface components. When laying out a PCB, follow the manufacturer pin-description and application schematics for power, ground, analog, and digital connections. Keep sensitive modem and DAA traces away from noisy switching paths, use a stable low-noise supply, and validate the completed interface against the target line standard. The 24-pin TSSOP outline requires careful escape routing between its closely spaced leads. This product page consolidates the SI2404-D-GT data rate, supported protocols, package details, pin-access guidance, and same-family alternatives into a focused engineering reference. It also provides practical selection criteria for legacy modem and global DAA designs where a 2.4 kbit/s interface and 24-pin TSSOP integration are the decisive requirements.

RFQ پەیوەندی
SI2415-C-FS - 14.4kbps ISOmodem System-Side IC | Skyworks
SI2415-C-FS

SI2415-C-FS - 14.4kbps ISOmodem System-Side IC | Skyworks

The Skyworks Solutions Inc. SI2415-C-FS is a system-side ISOmodem interface IC for data rates up to 14.4 kbps, supplied in a 16-pin SOIC package. It supports V.21, V.22, V.23, V.29, V.32, Bell 103 and Bell 212A data formats and provides a compact implementation of the system-side modem functions required in communications equipment. The device is associated with the Skyworks ISOmodem chipset approach for complete modem implementations. An ISOmodem is a dedicated data-communications interface that integrates modem-related signal processing into a dedicated IC rather than implementing the protocol entirely in general-purpose digital logic. Within the equipment hierarchy, this part belongs to the modem interface class, within communication interface ICs, within integrated circuits. Supporting multiple data formats lets one physical design accommodate legacy and higher-rate V-series or Bell-mode connections. The principal features of the SI2415-C-FS include 14.4 kbps operation, support for V.21, V.22, V.23, V.29, V.32, Bell 103 and Bell 212A formats, and a 16-SOIC package measuring 0.154 inches, or 3.90 mm, in width. Its lead-free construction and RoHS-compliant status are suitable for modern production environments. Commercial temperature-grade sourcing information and terminal-form details are associated with the device in distributor records. Skyworks positions the SI2415 as part of the ISOmodem family, which spans modem speeds from 2,400 bps to 56,000 bps and combines line-side and system-side functions into a chipset-oriented implementation. The SI2415-C-FS is identified specifically as the system-side device in the 16-pin package, making it suitable for designers building compact data links into terminal, communications or embedded equipment. Typical uses include legacy data-terminal equipment, point-of-sale systems, industrial data collection, telecommunications interface assemblies and embedded control products that require Bell 103, Bell 212A or V-series modem compatibility. A complete modem implementation may pair the system-side IC with a corresponding line-side device, an isolation barrier, telephone-network coupling components and an external data interface controller. When laying out a design, treat the telephone-line interface as a high-voltage, high-transient environment and follow the manufacturer’s isolation and protection guidance. Keep sensitive analog and line-side circuitry away from digital switching nodes, and use the datasheet pin-description table when assigning every 16-pin SOIC connection. Confirm line-side component values, crystal or timing requirements and interface levels against the complete chipset documentation before release. This page consolidates the device’s data formats, package characteristics and compliance attributes with practical implementation guidance. It also identifies the same-family SI2415-C-FT sourcing option for design teams evaluating package-compatible supply alternatives before committing a production BOM.

RFQ پەیوەندی
SI2415-C-FSR - 14.4kbps ISOmodem System-Side IC | Skyworks (Tape & Reel)
SI2415-C-FSR

SI2415-C-FSR - 14.4kbps ISOmodem System-Side IC | Skyworks (Tape & Reel)

The Skyworks Solutions Inc. SI2415-C-FSR is a system-side ISOmodem interface IC for data rates up to 14.4 kbps, supplied in a 16-pin SOIC package. It supports V.21, V.22, V.23, V.29, V.32, Bell 103 and Bell 212A data formats and provides a compact implementation of the system-side modem functions required in communications equipment. The device is associated with the Skyworks ISOmodem chipset approach for complete modem implementations. An ISOmodem is a dedicated data-communications interface that integrates modem-related signal processing into a dedicated IC rather than implementing the protocol entirely in general-purpose digital logic. Within the equipment hierarchy, this part belongs to the modem interface class, within communication interface ICs, within integrated circuits. Supporting multiple data formats lets one physical design accommodate legacy and higher-rate V-series or Bell-mode connections. The principal features of the SI2415-C-FSR include 14.4 kbps operation, support for V.21, V.22, V.23, V.29, V.32, Bell 103 and Bell 212A formats, and a 16-SOIC package measuring 0.154 inches, or 3.90 mm, in width. Its lead-free construction and RoHS-compliant status are suitable for modern production environments. Commercial temperature-grade sourcing information and terminal-form details are associated with the device in distributor records. Skyworks positions the SI2415 as part of the ISOmodem family, which spans modem speeds from 2,400 bps to 56,000 bps and combines line-side and system-side functions into a chipset-oriented implementation. The SI2415-C-FSR is identified specifically as the system-side device in the 16-pin package, making it suitable for designers building compact data links into terminal, communications or embedded equipment. Typical uses include legacy data-terminal equipment, point-of-sale systems, industrial data collection, telecommunications interface assemblies and embedded control products that require Bell 103, Bell 212A or V-series modem compatibility. A complete modem implementation may pair the system-side IC with a corresponding line-side device, an isolation barrier, telephone-network coupling components and an external data interface controller. When laying out a design, treat the telephone-line interface as a high-voltage, high-transient environment and follow the manufacturer’s isolation and protection guidance. Keep sensitive analog and line-side circuitry away from digital switching nodes, and use the datasheet pin-description table when assigning every 16-pin SOIC connection. Confirm line-side component values, crystal or timing requirements and interface levels against the complete chipset documentation before release. This page consolidates the device’s data formats, package characteristics and compliance attributes with practical implementation guidance. It also identifies the same-family SI2415-C-FT sourcing option for design teams evaluating package-compatible supply alternatives before committing a production BOM.

RFQ پەیوەندی
SI2415-D-FS 14.4 kbps ISOMODEM 16-SOIC | Skyworks
SI2415-D-FS

SI2415-D-FS 14.4 kbps ISOMODEM 16-SOIC | Skyworks

Skyworks Solutions SI2415-D-FS is a system-side ISOMODEM integrated circuit designed for 14.4 kbps data connections and support for V.21, V.22, V.23, V.29, V.32, Bell 103, and Bell 212A modem standards. The device is supplied in a 16-SOIC package. It is intended for telecommunications equipment, data communication interfaces, and embedded modem systems requiring a dedicated modem controller and processor function. An ISOMODEM is a semiconductor implementation of a modem, combining modulation and demodulation functions with the control logic needed to communicate over a telephone or communications line. The SI2415 series is associated with the ISOMODEM product family, which provides a modem solution for systems operating with legacy V-series and Bell protocols. In a system-level design, the device sits between a host controller or data terminal and the line interface, where it manages modem signaling and data transfer functions. The SI2415-D-FS is identified by Skyworks Solutions as a 14.4 kbps ISOMODEM system-side device. Its supported protocol set includes V.21, V.22, V.23, V.29, V.32, Bell 103, and Bell 212A. These standards cover asynchronous and synchronous modem operation used in telecommunications and data equipment, allowing the same IC family to address different line conditions and legacy communication environments. The 16-SOIC package provides a surface-mount format suitable for production PCB assembly. The suffix -FS identifies the package and ordering configuration. Distributor records associate SI2415-D-FS with a tube package, while another supplier record reports a 16-SOIC case with a 3.90 mm body width. The exact electrical limits, operating temperature range, supply requirements, clocking method, and detailed register organization must be confirmed in the Si2415 manufacturer datasheet before final circuit design. Typical applications include legacy telephone equipment, modem cards, industrial communications equipment, data terminal equipment, and embedded telecommunications controllers. In these applications, the SI2415-D-FS can handle modem protocol processing while the surrounding circuitry supplies the required interface functions. The IC is most appropriate when the target system already uses a compatible ISOMODEM architecture and supports the protocols listed for the SI2415 family. When designing a replacement board, verify the package footprint, supply voltage, interface signals, crystal or timing requirements, and protocol compatibility against the original design. Do not assume that a similarly named SI2415 variant is interchangeable solely because it belongs to the same family. Use the manufacturer pin-description table and application information when assigning PCB nets and selecting supporting components.

RFQ پەیوەندی
SI2434-C-FS - 33.6 kbps V.34 ISOmodem | Silicon Laboratories
SI2434-C-FS

SI2434-C-FS - 33.6 kbps V.34 ISOmodem | Silicon Laboratories

The Silicon Laboratories SI2434-C-FS is a 33.6 kbps V.34 data ISOmodem system-side interface IC operating from a 3.3 V supply and packaged in a 16-pin SOIC. The device is associated with the Si2434 modem family and is intended for system-side implementations of ITU V.34 data communications, including 33.6 kbps operation and support for legacy V.32BIS and V.22BIS signaling within the documented family feature set. An ISOmodem is a modem IC that integrates data-processing and analog interface functions to reduce the component count required for a complete data communications modem. Within the product hierarchy, a modem controller belongs to the broader class of interface ICs, while the data format is defined by the V.34 recommendation and the physical interface functions through the ISOmodem architecture. The system-side designation indicates that this part is intended for the equipment side of the data link rather than the central-office side. The SI2434-C-FS uses a 3.3 V operating supply and supports data rates up to 33.6 kbps. Its 16-SOIC package is a surface-mount, 0.154-inch-wide body format with a stated body width of 3.90 mm. The exact lead pitch, temperature range, maximum supply voltage, current consumption, exposed interface levels, and supported country-network restrictions must be confirmed against the manufacturer datasheet before a new PCB or production release is approved. The device belongs to the Si2434 chipset generation, which also included V.90, V.34, V.32BIS, and V.22BIS ISOmodem capabilities. This legacy positioning is important for engineers supporting installed telecommunications equipment: the useful design question is not only whether the data rate meets the application, but also whether the required line interface, signaling profile, clocking arrangement, and regulatory/network behavior match the original system. Typical uses include system-side modem sections in industrial data communications, remote-control equipment, legacy data terminals, point-of-sale systems, and embedded communications equipment that must interoperate with an existing V.34 network. The device may be paired with isolation, line-interface, clock-generation, and signal-conditioning components selected for the host board and network environment. A new design should use the manufacturer pin-description table and reference circuits to assign tracks rather than inferring connections from the package outline. Verify the analog and digital interfaces, supply sequencing, decoupling, exposed-ground requirements, and any regulatory or network-approval constraints. For a previously qualified board, compare both electrical functions and package geometry before substitution. This product record combines the exact ordering information, package information, protocol description, cross-reference evidence, and engineering-oriented selection guidance needed to evaluate the SI2434-C-FS for legacy modem and interface designs.

RFQ پەیوەندی
SI2434-C-FT - 33.6k Modem IC | Skyworks Solutions | 24-TSSOP
SI2434-C-FT

SI2434-C-FT - 33.6k Modem IC | Skyworks Solutions | 24-TSSOP

Skyworks Solutions Inc. SI2434-C-FT is a 33.6 kbps ISOModem integrated circuit supporting V.21, V.22, V.23, V.29, V.32, V.34, Bell 103, and Bell 212A data formats. Designed around a 3.3 V supply, the device operates from -40°C to +85°C and is packaged in a 24-pin TSSOP measuring 4.40 mm wide. It is positioned for compact data-communication and modem interface equipment. An ISOModem is a semiconductor implementation of a data modem. In the product hierarchy, a modem integrated circuit belongs to interface ICs, connecting physical communication lines with digital data-processing systems. The SI2434 family combines protocol support, line-interface functionality, and host-facing control into one device, reducing the component count required for a complete modem subsystem. The SI2434-C-FT supports a broad set of legacy and ITU modem data formats at a maximum rate of 33.6 kbps. Its operating characteristics identify a 4.92 MHz operating frequency, a 3.3 V operating supply, and approximately 17 mA operating supply current. These figures make the device suitable for systems designed around a regulated 3.3 V rail and moderate-power embedded communication equipment. The device combines parallel, SPI, and UART interface capabilities according to the published ISOModem family comparison information. These host interfaces allow the modem circuitry to be controlled by an embedded microcontroller or other digital controller. Integration of the communication protocol and digital control interface can simplify firmware organization and reduce the number of separate interface devices required in a communications appliance. Typical uses include legacy data communication, remote terminal equipment, industrial serial links, point-of-sale interfaces, and embedded modem modules. The supported V.21 through V.34 formats and Bell protocols make the SI2434-C-FT appropriate where compatibility with established modem signaling conventions is important. System-level verification remains necessary because line impedance, isolation, connectors, and regional carrier requirements can affect the complete interface. The primary design consideration is the 3.3 V power architecture. The PCB should provide stable decoupling at the supply pins, controlled signal routing around modem and line-interface circuitry, and adequate thermal margin for the -40°C to +85°C operating range. Designers should also follow the package drawing and pin-description table when assigning tracks and selecting the analog or communication-side components around the device. This page organizes the principal SI2434-C-FT characteristics, package information, application guidance, comparison points, and sourcing questions. It also identifies the limits of the available technical record so engineers can distinguish documented functions from parameters that still require confirmation in the manufacturer datasheet.

RFQ پەیوەندی
SI2434-D-FS 33.6 kbps ISOMODEM | Skyworks Solutions
SI2434-D-FS

SI2434-D-FS 33.6 kbps ISOMODEM | Skyworks Solutions

Skyworks Solutions SI2434-D-FS is a 33.6 kbps ISOMODEM system-side interface IC supporting V.21, V.22, V.23, V.29, V.32, Bell 103, and Bell 212A in a 16-pin SOIC package. It operates from a 3 V to 3.6 V supply and is designed for integrated telephone-line data modem designs. An ISOMODEM is a highly integrated data access arrangement, or DAA, that combines modem signal processing with the analog telephone-line interface. This system-side device belongs to the modem IC category within the broader interface IC and data-communication equipment hierarchy. Integrating the system-side functions into one package reduces the number of external components required for a telephone-line modem or data terminal adapter. The SI2434-D-FS supports 33.6 kbps operation and the listed V-series and Bell 103/212A modulation schemes. Its 16-SOIC surface-mount construction is suitable for compact communication equipment, while the 3 V to 3.6 V operating range suits modern low-voltage systems. The manufacturer describes the device as an ISOMODEM system-side component, pairing it with a compatible Skyworks line-side device in complete modem solutions. Skyworks ISOmodem devices use the patented direct access arrangement technology to provide a programmable telephone-line interface with high integration. The SI2434 provides the system-side modem functions, while a companion line-side device handles the line-facing interface. This division allows a compact two-chip implementation instead of a discrete modem, line driver, and protection network. Typical applications include asynchronous serial modems, remote-access systems, data terminal adapters, embedded telephone-line data equipment, and legacy data-communication links. The SI2434-D-FS is also appropriate for equipment that must interoperate with Bell 103 or Bell 212A systems while supporting the listed ITU V-series protocols. The principal design consideration is that the SI2434 is only the system-side portion of the chipset. Board designers must select a compatible line-side device, implement the recommended external network interface, and follow the manufacturer's reference circuit for filtering, protection, termination, and layout. Check the line-side device supply requirements and signal-level compatibility before releasing a production schematic. This page combines protocol coverage, package information, verified sourcing listings, drop-in same-family alternatives, and practical implementation guidance. It is intended to help engineers evaluate the SI2434-D-FS for legacy telephone-line modem upgrades, interface redesigns, and long-tail supply situations before requesting a quote.

RFQ پەیوەندی
SI2434-D-GT - 33.6 kbps ISOMODEM | Skyworks | 24-TSSOP
SI2434-D-GT

SI2434-D-GT - 33.6 kbps ISOMODEM | Skyworks | 24-TSSOP

The Skyworks Solutions Inc. SI2434-D-GT is a 33.6 kbps ISOMODEM with integrated Global DAA, supporting ITU-T, Bell, V.21, V.22, V.29, V.32, V.42, V.42bis, V.44, MNP2-5, Fast Connect, and Type I and II caller-ID decoding in a 24-pin TSSOP package. An ISOMODEM is an integrated modem IC that combines digital signal processing with telephone-line interface functions. It belongs to the modem chipset family, interface IC hierarchy, and broader semiconductor category. Its Global DAA provides the analog telephone-line connection, while the integrated modem controller handles modulation, demodulation, data compression, error correction, and signaling protocols used by legacy analog, fax, and data-modem equipment. Key capabilities include support for ITU-T and Bell data rates from 300 bps through 56 kbps, automatic rate negotiation, Fast Connect operation, V.42 and V.42bis error correction, and MNP2-5 negotiation support. Caller-ID decoding for Type I and II systems provides a useful distinction in telephone equipment, while the 24-TSSOP package supports conventional surface-mount PCB assembly. Revision D applies to the SI2434, SI2435, SI2457, and SI2404 modem family documentation. This relationship allows engineers to interpret the modem formats and shared features accurately, but each orderable MPN should still be checked for its own electrical limits, pin connections, regional approval requirements, and firmware compatibility. The SI2434-D-GT is identified specifically as the Global DAA version. Typical uses include industrial data modems, remote terminal equipment, fax interfaces, telephone-line data products, and embedded analog-PSTN communication systems. In these systems, the IC can reduce board area by integrating modem signal processing and the line-side DAA, but external passive components, isolation, line protection, connectors, and approved interface circuitry remain important parts of a production design. Designers should follow the manufacturer datasheet for the exact 24-pin assignments, supply limits, clock requirements, line-side component values, and recommended layout. Do not substitute a related SI24xx MPN solely because it uses a similar package; confirm pin compatibility, Global DAA requirements, supported protocols, firmware, and applicable telephone-network approvals before releasing a replacement design. This page combines the exact product identity, package, supported modem formats, protocol capabilities, replacement assessment, and practical design guidance into one engineering reference. It also distinguishes direct replacement evidence from related-family comparisons so procurement and hardware teams can evaluate the SI2434-D-GT without confusing an orderable suffix, package variant, or protocol variant with a verified drop-in replacement.

RFQ پەیوەندی
SI2435-A-FT V.34 System-Side Modem IC | Silicon Labs
SI2435-A-FT

SI2435-A-FT V.34 System-Side Modem IC | Silicon Labs

The Silicon Labs SI2435-A-FT is a V.34 system-side modem integrated circuit packaged in a 24-pin TSSOP. The device is identified specifically as a Modem V.34 24-TSSOP component, positioning it for system-side data communication designs that require an integrated V.34-compatible modem function. Its 24-pin surface-mount package supports compact PCB layouts, while the FT ordering suffix identifies the specific packaged configuration used by this part. A system-side modem IC is a type of interface integrated circuit that converts digital data into a modulated analog signal and reconstructs digital data from a received modulated signal. Within the broader product hierarchy, it belongs to modem ICs, communication interface ICs, interface ICs, and integrated circuits. The SI2435-A-FT is therefore positioned between general-purpose data interfaces and complete external modem modules, allowing a design to incorporate V.34 modem functionality directly into a system board. The principal documented feature of SI2435-A-FT is its V.34 modem classification. Its 24-pin TSSOP package provides 24 physical lead positions for power, grounding, analog and digital signal connections, control functions, and supporting circuitry. The manufacturer datasheet remains the authoritative source for pin names, electrical limits, clock requirements, interface timing, and recommended external component values. SI2435-A-FT is suitable for applications requiring a conventional V.34-compatible system-side modem path, including legacy data communications equipment, remote-control systems, point-to-point data links, and embedded communication equipment designed around V.34 signaling. System designers should preserve the recommended analog and digital layout separation, provide the specified power and reference components, and validate the complete signal path against the manufacturer’s application guidance. Thermal and electrical design must account for the device’s local dissipation, copper connectivity, and nearby heat sources. Because the device combines analog modulation functions with digital control logic, grounding, bypass placement, and return-path continuity can materially affect signal integrity. A conservative layout should keep sensitive analog routes away from high-current switching paths and use a quiet ground strategy appropriate to the application. For new layouts, the 24-pin TSSOP footprint provides a defined mechanical interface, but engineers should not infer pin functions from package position alone. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, and review the recommended application circuit before fixing component values or isolation boundaries. This product page combines package and product classification information with practical layout guidance, application-fit analysis, sourcing questions, and engineering-oriented comparisons. It is designed to help evaluators identify whether the SI2435-A-FT matches the required V.34 system-side modem function before beginning detailed circuit implementation.

RFQ پەیوەندی
SI2435-E-FT - 33.6 kbps V.34 Modem | Skyworks | Fax Systems
SI2435-E-FT

SI2435-E-FT - 33.6 kbps V.34 Modem | Skyworks | Fax Systems

Skyworks Solutions SI2435-E-FT is a V.34 system-side fax modem IC operating at up to 33.6 kbps and packaged in a 24-pin TSSOP. The device belongs to the Silicon Laboratories ISOmodem family and integrates a globally programmable telephone-line interface using a third-generation direct access arrangement, or DAA. It is intended for compact fax and data-communication systems requiring an integrated modem function rather than a collection of separate analog and digital interface circuits. An ISOmodem is an integrated modem solution that combines digital signal processing with telephone-line interface functions. The DAA connects the modem to an analog telephone line while isolating and conditioning the signal path. Within the broader hierarchy, this component is a communication interface IC, a data modem, and ultimately a semiconductor designed for embedded communications equipment. The SI2435-E-FT supports V.34 operation at 33.6 kbps, providing the principal data-rate specification for this ordering code. Its 24-TSSOP surface-mount package supports compact PCB construction while retaining enough pins for power, control, data, and line-interface connections. The component is identified as the system-side member of the SI2435 and SI2417 two-chip fax-modem chipset described by the manufacturer documentation. The Si2435 and Si2417 family combines modem processing with a programmable DAA to reduce the number of external components required around a telephone-line interface. This integration is valuable in embedded fax appliances, multifunction peripherals, telephone systems, and other equipment that must communicate over analog telephone lines. The exact power, voltage, timing, and environmental limits should be confirmed in the manufacturer datasheet before schematic release. A successful design must account for the analog telephone-network environment, including line protection, isolation, grounding, and signal coupling. Follow the reference connection and component-selection guidance in the SI2435/Si2417 datasheet rather than treating the modem IC as a standalone USB or UART peripheral. The device communicates according to a dedicated modem interface rather than a generic serial protocol. When comparing this part with another modem, verify the line standard, maximum bit rate, chip-set role, DAA architecture, package, pinout, and clock requirements. A device with the same nominal speed is not necessarily a drop-in replacement. Board changes may be required if its digital interface, analog support network, firmware expectations, or package differs. This product page consolidates the manufacturer specifications, package information, sourcing guidance, application guidance, and verified cross-reference status for the SI2435-E-FT. It also distinguishes confirmed technical facts from electrical details that still require consultation of the official datasheet, helping engineers qualify the device before committing a telephone-interface board to production.

RFQ پەیوەندی
SI2435-F-FT 33.6kbps V.34 Fax Modem | Skyworks
SI2435-F-FT

SI2435-F-FT 33.6kbps V.34 Fax Modem | Skyworks

Skyworks Solutions Inc. SI2435-F-FT is a 33,600 bit/s V.34 fax modem IC with an integrated direct access arrangement, a built-in phase-locked loop, and DTMF detection, housed in a 24-pin TSSOP package. The Si2435 is the system-side device in the Si2435 and Si2417 two-chip ISOmodem fax-modem chipset, combining telephone-line interface functions with digital signal processing. An ISOmodem is an integrated modem system that provides a compact interface between digital equipment and an analog telephone line. Its direct access arrangement, or DAA, handles the physical line connection, while the companion Si2417 provides the supporting system-side functions. The Si2435 is specifically designed for high-performance Group 3 fax communication systems and can operate across the 14,400 to 33,600 bit/s speed range identified for the chipset. The SI2435-F-FT combines several communications functions in one package. Key features include a built-in phase-locked loop, DTMF detection, globally programmable telephone-line interfacing, and V.34 modem operation rated at 33,600 bit/s. Its 24-pin TSSOP package supports conventional surface-mount PCB assembly and is suitable for embedded fax, multifunction-printer, and office-equipment designs. The Si2435 architecture integrates a third-generation direct access arrangement with the modem signal-processing functions. This integration reduces the number of external telephone-interface components required by the host system. The phase-locked loop supports stable synchronization within the modem design, while DTMF detection provides call-control information commonly used by telephone and fax equipment. Typical uses include 33.6 kbit/s Group 3 fax machines, multifunction printers, fax servers, thermal-transfer fax products, and embedded communications modules. The two-chip Si2435 and Si2417 architecture is intended for designs that need telephone-line connectivity while preserving a compact implementation and avoiding a large collection of discrete analog-interface components. When designing around the SI2435-F-FT, use the manufacturer’s reference circuit, exposed-pad or thermal-layout guidance where applicable, and the complete Si2435/Si2417 datasheet to establish the DAA network and digital interface. Check the host processor voltage levels, line-side protection requirements, and country-specific telephone-network interface implementation before releasing a production layout. This product page combines manufacturer application guidance with package, interface, and sourcing information to help engineers identify the correct Si2435 configuration. It also documents the chipset relationship, explains the design roles of the Si2435 and Si2417, and highlights practical considerations for dependable embedded fax-modem integration.

RFQ پەیوەندی
SI2438-A-FT - 33.6kbps V.34 ISOmodem | Skyworks
SI2438-A-FT

SI2438-A-FT - 33.6kbps V.34 ISOmodem | Skyworks

Skyworks Solutions Inc. SI2438-A-FT is a 56k V.34 ISOmodem system-side IC with a maximum data rate of 33.6 kbps, packaged in a compact 24-TSSOP surface-mount package. It integrates data, fax, and voice modem functions for legacy communication equipment and is identified as obsolete by current product-status records. The 24-pin TSSOP package measures 4.40 mm in width and is supplied in tube packaging. An ISOmodem is a semiconductor implementation of the ITU-T V.34 modem standard. Within the telecommunications hierarchy, a V.34 modem belongs to data-communication ICs, interface ICs, and broader network-access semiconductors. It converts digital data into signals compatible with switched telephone networks while supporting call-control and voice-related functions. A system-side modem IC is commonly paired with a line-side counterpart, host interface circuitry, and isolation or telephone-network protection components. The SI2438-A-FT is identified as a 56k-class V.34 device, while comparison documentation states a maximum data rate of 33.6 kbps. Its key characteristics include a 24-TSSOP package, support for data, fax, and voice operation, and a lead-free construction. These characteristics suit compact embedded and telecom products that must retain compatibility with established V.34 equipment rather than migrate to a newer modem architecture. The device represents a compact integration of modem signal processing, control logic, and interface functions. Its 24-pin surface-mount format allows moderate board-space savings compared with a larger through-hole package, while tube packaging can support controlled manufacturing and automated assembly. System designers must account for the obsolete lifecycle status and confirm availability before committing to new production quantities. Typical uses include legacy fax equipment, data terminal interfaces, industrial data-communication equipment, voice-over-data systems, and embedded telecom products that require V.34 operation. A host processor and suitable telephone-line interface components remain necessary around the modem IC. The related SI2438-B-FT and SI2456-FTR devices can provide useful product-family migration options when their exact electrical and pin requirements are verified against the target design. For a new layout, use the 24-TSSOP footprint and the pin-description table in the manufacturer datasheet before assigning signals or routing sensitive telephone-network nodes. Check the telephone-line protection network, supply requirements, clocking, interface levels, and component tolerances. Because the SI2438-A-FT is obsolete, production continuity and lifecycle risk should be resolved before schematic release. This page consolidates the known package, data-format, voice, lifecycle, and environmental characteristics of the SI2438-A-FT with family alternatives and practical design guidance. The comparison tables focus on verified package and modem-function differences, helping engineers identify which same-package candidates merit a formal second-source review.

RFQ پەیوەندی
SI2438-A-GT - 56k V.34 ISOmodem IC | Skyworks Solutions
SI2438-A-GT

SI2438-A-GT - 56k V.34 ISOmodem IC | Skyworks Solutions

Skyworks Solutions SI2438-A-GT is a 56k V.34 ISOmodem system-side interface IC for data, fax, and voice connectivity, housed in a surface-mount 24-pin TSSOP package. It operates from a 3.3 V supply, draws approximately 17 mA, and is specified for operation from 0 °C to +70 °C. The device belongs to the network controller and processor IC category and provides the system-side interface for legacy modem and fax designs. An ISOmodem is a mixed-signal communications interface that separates analog telephone-line signaling from digital host processing. In the broader device hierarchy, this IC sits between a host processor or data terminal and a telephone network: the digital side manages control and data transfer, while the analog side handles line-side modulation, demodulation, and call signaling. This division allows modem functions to be implemented with fewer external components than a fully discrete analog modem design. The SI2438-A-GT is identified as a 56k V.34 modem device, with 33.6 kbps operation also documented in related catalog records. It supports data, fax, and voice ISOmodem functions, making it suitable for legacy terminal equipment, embedded communication controllers, industrial data links, and telephone interfaces. Its 24-TSSOP package supports compact surface-mount assembly while retaining enough I/O for external analog and host connections. Operation at 3.3 V and approximately 17 mA makes the device appropriate for systems designed around contemporary low-voltage digital logic. The system-side architecture supports integration with a microcontroller or other communications controller rather than requiring a complete modem subsystem on the host board. Designers should still account for line-interface components, isolation requirements, grounding, and the analog signal path when calculating a complete modem circuit. The operating-temperature range of 0 °C to +70 °C identifies the part as a commercial-temperature component rather than an automotive or extended-industrial grade device. It is appropriate for indoor commercial, communications, and embedded equipment where the enclosure temperature remains within that range. Extended-temperature or safety-critical installations should be reviewed against the requirements of the finished system before release. PCB implementation requires careful separation of the digital host interface from the analog telephone-line circuitry. Keep sensitive analog routing short, use a continuous ground reference, decouple the 3.3 V supply close to the device, and follow the manufacturer pin-description and layout guidance when assigning nets. The 24-TSSOP footprint also needs adequate assembly clearance for lead pitch and soldering inspection. This page consolidates the device identity, operating limits, package information, direct replacement questions, and application-specific engineering guidance. It also highlights the trade-offs between the SI2438 family and related 24-TSSOP modem controllers, making it easier to identify the most appropriate migration path without relying on a simple package-only match.

RFQ پەیوەندی
SI2438-A-GTR - 56k V.34 ISOmodem IC | Skyworks Solutions (Tape & Reel)
SI2438-A-GTR

SI2438-A-GTR - 56k V.34 ISOmodem IC | Skyworks Solutions (Tape & Reel)

Skyworks Solutions SI2438-A-GTR is a 56k V.34 ISOmodem system-side interface IC for data, fax, and voice connectivity, housed in a surface-mount 24-pin TSSOP package. It operates from a 3.3 V supply, draws approximately 17 mA, and is specified for operation from 0 °C to +70 °C. The device belongs to the network controller and processor IC category and provides the system-side interface for legacy modem and fax designs. An ISOmodem is a mixed-signal communications interface that separates analog telephone-line signaling from digital host processing. In the broader device hierarchy, this IC sits between a host processor or data terminal and a telephone network: the digital side manages control and data transfer, while the analog side handles line-side modulation, demodulation, and call signaling. This division allows modem functions to be implemented with fewer external components than a fully discrete analog modem design. The SI2438-A-GTR is identified as a 56k V.34 modem device, with 33.6 kbps operation also documented in related catalog records. It supports data, fax, and voice ISOmodem functions, making it suitable for legacy terminal equipment, embedded communication controllers, industrial data links, and telephone interfaces. Its 24-TSSOP package supports compact surface-mount assembly while retaining enough I/O for external analog and host connections. Operation at 3.3 V and approximately 17 mA makes the device appropriate for systems designed around contemporary low-voltage digital logic. The system-side architecture supports integration with a microcontroller or other communications controller rather than requiring a complete modem subsystem on the host board. Designers should still account for line-interface components, isolation requirements, grounding, and the analog signal path when calculating a complete modem circuit. The operating-temperature range of 0 °C to +70 °C identifies the part as a commercial-temperature component rather than an automotive or extended-industrial grade device. It is appropriate for indoor commercial, communications, and embedded equipment where the enclosure temperature remains within that range. Extended-temperature or safety-critical installations should be reviewed against the requirements of the finished system before release. PCB implementation requires careful separation of the digital host interface from the analog telephone-line circuitry. Keep sensitive analog routing short, use a continuous ground reference, decouple the 3.3 V supply close to the device, and follow the manufacturer pin-description and layout guidance when assigning nets. The 24-TSSOP footprint also needs adequate assembly clearance for lead pitch and soldering inspection. This page consolidates the device identity, operating limits, package information, direct replacement questions, and application-specific engineering guidance. It also highlights the trade-offs between the SI2438 family and related 24-TSSOP modem controllers, making it easier to identify the most appropriate migration path without relying on a simple package-only match.

RFQ پەیوەندی
SI2438-B-FT - 33.6 kbps ISOmodem | Skyworks Solutions | 24-TSSOP
SI2438-B-FT

SI2438-B-FT - 33.6 kbps ISOmodem | Skyworks Solutions | 24-TSSOP

Skyworks Solutions Inc. SI2438-B-FT is a system-side ISOmodem integrated circuit for data, fax, and voice signaling, operating at 33.6 kbps in a 24-pin TSSOP package. The device supports legacy V.34 modem applications and combines modem signal processing with telephone-interface functions for compact communication equipment. It is offered in a lead-free 24-TSSOP configuration for surface-mount assembly. An ISOmodem is a single-chip implementation of the modulation, demodulation, and signaling functions used to communicate over analog telephone lines. In the broader product hierarchy, an ISOmodem is a communications IC, while a modem IC is a more specific type of network controller and processor. System-side devices work with a counterpart line-side modem to establish data, fax, or voice connections using copper telephone networks. The SI2438-B-FT provides a maximum signaling rate of 33.6 kbps, matching the advertised V.34 modem class. Its 24-TSSOP package supports compact, automated PCB assembly while exposing the device's external interface and control functions. The B revision is associated with a lead-free ordering configuration. Applications include embedded telephone systems, fax terminal controllers, data communications equipment, and legacy telephone-line products that require a dedicated modem engine. Because this is a mixed-signal communications device, board design must account for analog line handling, digital control signals, power-supply quality, and exposed-pad or thermal requirements described by the package documentation. Input and output filtering, isolation boundaries, grounding, and external line-interface components are essential to prevent modulation energy from coupling into sensitive logic. Firmware and host-driver compatibility should also be verified before replacing another modem controller. The SI2438-B-FT is most appropriate when a new design deliberately targets V.34-class data and fax connectivity and can accommodate a legacy telephone-line interface. It is not a drop-in substitute for a broadband, Ethernet, wireless, or modern broadband voice terminal, even when those products serve similar end-user functions. Existing products should also be checked for regional analog-network approval and obsolete-part risk. For a new layout, use the manufacturer's pin-description and layout guidance to assign all 24 pins and connect the required interface components. Review the clock, crystal or timing requirements, line-side connections, reset behavior, and supply decoupling against the device documentation. Preserve the defined exposed-pad connection if the package drawing calls for one, and validate signal integrity from the analog interface through the digital controller. This product page organizes the confirmed identity, package, speed class, sourcing workflow, alternative-device evidence, and design considerations for the SI2438-B-FT. It also identifies which engineering details require confirmation in the manufacturer documentation before schematic release or production qualification.

RFQ پەیوەندی
SI2438-B-FTR - 33.6 kbps ISOmodem | Skyworks Solutions | 24-TSSOP (Tape & Reel)
SI2438-B-FTR

SI2438-B-FTR - 33.6 kbps ISOmodem | Skyworks Solutions | 24-TSSOP (Tape & Reel)

Skyworks Solutions Inc. SI2438-B-FTR is a system-side ISOmodem integrated circuit for data, fax, and voice signaling, operating at 33.6 kbps in a 24-pin TSSOP package. The device supports legacy V.34 modem applications and combines modem signal processing with telephone-interface functions for compact communication equipment. It is offered in a lead-free 24-TSSOP configuration for surface-mount assembly. An ISOmodem is a single-chip implementation of the modulation, demodulation, and signaling functions used to communicate over analog telephone lines. In the broader product hierarchy, an ISOmodem is a communications IC, while a modem IC is a more specific type of network controller and processor. System-side devices work with a counterpart line-side modem to establish data, fax, or voice connections using copper telephone networks. The SI2438-B-FTR provides a maximum signaling rate of 33.6 kbps, matching the advertised V.34 modem class. Its 24-TSSOP package supports compact, automated PCB assembly while exposing the device's external interface and control functions. The B revision is associated with a lead-free ordering configuration. Applications include embedded telephone systems, fax terminal controllers, data communications equipment, and legacy telephone-line products that require a dedicated modem engine. Because this is a mixed-signal communications device, board design must account for analog line handling, digital control signals, power-supply quality, and exposed-pad or thermal requirements described by the package documentation. Input and output filtering, isolation boundaries, grounding, and external line-interface components are essential to prevent modulation energy from coupling into sensitive logic. Firmware and host-driver compatibility should also be verified before replacing another modem controller. The SI2438-B-FTR is most appropriate when a new design deliberately targets V.34-class data and fax connectivity and can accommodate a legacy telephone-line interface. It is not a drop-in substitute for a broadband, Ethernet, wireless, or modern broadband voice terminal, even when those products serve similar end-user functions. Existing products should also be checked for regional analog-network approval and obsolete-part risk. For a new layout, use the manufacturer's pin-description and layout guidance to assign all 24 pins and connect the required interface components. Review the clock, crystal or timing requirements, line-side connections, reset behavior, and supply decoupling against the device documentation. Preserve the defined exposed-pad connection if the package drawing calls for one, and validate signal integrity from the analog interface through the digital controller. This product page organizes the confirmed identity, package, speed class, sourcing workflow, alternative-device evidence, and design considerations for the SI2438-B-FTR. It also identifies which engineering details require confirmation in the manufacturer documentation before schematic release or production qualification.

RFQ پەیوەندی
SI2438-B-GT - 33.6kbps V.34 ISOModem | Skyworks
SI2438-B-GT

SI2438-B-GT - 33.6kbps V.34 ISOModem | Skyworks

Skyworks Solutions SI2438-B-GT is a 33.6 kb/s ISOModem network interface controller implementing V.34 data-modem technology in a surface-mount 24-pin TSSOP package. The 4.40 mm wide package combines a complete modem data path, parallel and serial host-interface support, and telephone-line-oriented signal functions in a compact integrated circuit. The SI2438-B-GT is also described in the 56k modem class, providing a bridge between legacy V.34 data communication and modern embedded equipment designs. An ISOModem is a single-chip integrated modem built around International Telephone and Consultative Committee modem technology. Unlike a collection of discrete filters, amplifiers, oscillators, and line-interface components, an integrated modem controller combines modulation, data handling, and control functions into one semiconductor. This makes the ISOModem category useful for embedded data communication, industrial terminal equipment, point-of-sale systems, and other products that must exchange data over a telephone or analog communications channel. The SI2438-B-GT's defining characteristics include a 33.6 kb/s data rate, V.34 modem operation, ISOModem architecture, and a 24-TSSOP surface-mount package. Its 4.40 mm package width supports compact circuit layouts while exposing separate communication, interface, control, and supply functions around the device. The source listing identifies it as a network controller and processor IC within the telecom interface category, making it suitable for equipment designers evaluating a dedicated modem controller rather than a general-purpose communications processor. The controller supports integration into embedded modem equipment where a standardized V.34 data path is required. Its parallel, SPI, and UART interface information is associated with the SI2438 family, while the device also provides voice-capable ISOModem operation. Designers should confirm the required host interface, line-side support components, clocking, and termination arrangement against the manufacturer documentation for the exact system configuration before releasing the PCB layout. Typical applications include legacy data terminals, industrial telemetry equipment, remote-control systems, fax-related data products, point-of-sale terminals, and embedded modem controller designs. The compact TSSOP package is particularly useful where a through-hole interface circuit would consume excessive board area. A complete implementation still requires the external analog line interface, isolation or surge-protection strategy, suitable supply rails, and firmware appropriate to the selected modem operating mode. The primary design consideration is interface completeness. Because SI2438-B-GT integrates modem control rather than every external telephone-line protection component, the board must include the required analog coupling and protection network. Confirm pin-level signal assignment, crystal or clock requirements, line-driver components, and supply sequencing directly in the pin-description table before schematic release. This page organizes the SI2438-B-GT specifications, verified package information, related modem controllers, and practical selection guidance into one engineering-focused reference. It also distinguishes documented V.34 operation from related family members whose ordering codes, descriptions, or interface emphasis differ.

RFQ پەیوەندی
SI2439-A-FM - V.34/V.92 Global DAA Modem | Skyworks
SI2439-A-FM

SI2439-A-FM - V.34/V.92 Global DAA Modem | Skyworks

Skyworks Solutions SI2439-A-FM is a single-chip ISOmodem integrated circuit supporting V.34 and V.92 modem standards, operating at 33.6 kbps, and integrating a global DAA. The device is supplied in a surface-mount 38-pin QFN package measuring 5 mm by 7 mm and operates from a 3 V to 3.6 V supply. An ISOmodem is an integrated modem IC that combines a data-access arrangement with modem signal-processing functions. In the broader semiconductor hierarchy, it is a communication interface IC and a network controller/processor-class device that connects host equipment to analog telephone, WAN, or digital-network interfaces. The integrated DAA reduces the number of external telephone-line interface components needed in a connected product. The SI2439-A-FM is identified as a V.34 and V.92 modem solution with a stated data rate of 33.6 kbps. Its 38-QFN construction is intended for compact surface-mount equipment, while the exposed-pad package arrangement supports board-level thermal management. The 3 V to 3.6 V operating range allows the modem circuitry to operate from a regulated low-voltage rail in embedded communications equipment. This part belongs to Skyworks' ISOmodem family, where modulation, data pumping, line-interface functions, and a global DAA are consolidated into one mixed-signal semiconductor. Consolidation can reduce external component count and board area compared with a discrete modem implementation. The package also reduces interconnect complexity by placing the modem functions and their required land pattern on a single surface-mount device. Typical uses include embedded asynchronous modems, data communications equipment, telephone-network interfaces, industrial data links, and legacy WAN connectivity equipment. Selection is appropriate when a design specifically requires V.34 or V.92 compatibility, a 33.6 kbps modem channel, and the SI2439-A-FM's integrated global DAA. Host software, line-interface support, and regulatory certification must be evaluated as part of the complete modem subsystem. The principal design consideration is the exposed-pad footprint. Place the device according to the manufacturer's land pattern, provide all supply and ground connections, and follow the datasheet's recommended decoupling and thermal-layout requirements. Because modem performance depends on the surrounding telephone interface and implementation, validate conducted emissions, line behavior, and interoperability in the final equipment rather than relying only on individual IC measurements. This page consolidates the verified product identity, package information, modem standards, supply range, and sourcing information into one engineering reference. It also distinguishes confirmed device attributes from details that require direct review of the manufacturer datasheet, including the complete pin table, clocking requirements, line-interface values, and approved application configurations.

RFQ پەیوەندی
SI2439-A-GM V.34/V.92 ISOMODEM | Skyworks Solutions
SI2439-A-GM

SI2439-A-GM V.34/V.92 ISOMODEM | Skyworks Solutions

Skyworks Solutions SI2439-A-GM is a V.34 and V.92 ISOmodem system-side interface integrated circuit housed in a 38-pin QFN package measuring 5 mm by 7 mm. The device operates at 33.6 kbps and is intended for data communication equipment requiring a complete analog telephone-interface modem solution. Its defining characteristics include support for ITU-T V.34 and V.92 protocols, a global DAA, a 3 V to 3.6 V supply range, and surface-mount construction. An ISOmodem is an integrated modem interface and data-access arrangement used within communications equipment. In this product category, the modem controller and telephone-line interface functions are combined to reduce the number of external components needed by the host system. Within the broader hierarchy, an ISOmodem is an interface IC, a communication IC, and ultimately a semiconductor designed to connect digital equipment to analog or digital communication channels. The SI2439-A-GM is identified by Skyworks Solutions as a V.34/V.92 modem with global DAA support. It supports operation up to 33.6 kbps, as confirmed by the product listing for the exact MPN. The 38-QFN package places the device in a compact surface-mount format suitable for high-density communication equipment, while the exposed-pad construction provides a defined path for heat transfer through the PCB. The 3 V to 3.6 V operating supply allows integration with common low-voltage digital systems. A primary use for this device is a data communications terminal or remote-access unit requiring a complete system-side modem. The global DAA can support country-specific telephone-line interfaces while the V.34 and V.92 capabilities provide compatibility with legacy and higher-speed modem standards. Integration can reduce board area compared with a discrete codec, line-driver, and controller implementation, although the host equipment must still satisfy the applicable telephone-network requirements. Designers should pay close attention to the analog line interface, supply decoupling, exposed-pad soldering, and signal-integrity layout. The manufacturer datasheet is the controlling document for pin assignments, recommended external circuitry, timing, electrical limits, and programming procedures. Because the modem connects directly to communication circuitry, keep sensitive analog routing separated from noisy digital and power-conversion paths, and provide the required bypass capacitors close to the supply pins. This product page organizes the exact SI2439-A-GM identity, package information, technical specifications, sourcing guidance, and verified same-family alternatives into one engineering reference. It also distinguishes confirmed catalog parameters from detailed electrical characteristics that must be established from the manufacturer datasheet before schematic capture or production release.

RFQ پەیوەندی
SI2456-FT 56 kbps ISOModem Chipset | Silicon Laboratories
SI2456-FT

SI2456-FT 56 kbps ISOModem Chipset | Silicon Laboratories

The Silicon Laboratories SI2456-FT is a 3.3 V ISOModem chipset with an integrated global data access arrangement, operating at Bell 300 bps to 56 kbps data rates in a 24-lead TSSOP package. It supports V.21, V.22, V.23, V.32, V.32bis, V.34, V.42bis, V.90, Bell 103, and Bell 212A signaling. The SI2456-FT also provides more than 5000 V capacitive isolation, parallel phone detection, automatic rate negotiation, and a globally compliant line interface. An ISOModem chipset is an integrated data-over-voice modem optimized for telephone and wide-area-network endpoints. Within the broader modem hierarchy, it combines signaling functions, data-link protocols, and telephone-line interface circuitry in one IC. This integration reduces the number of external interface components required in designs that need asynchronous or synchronous data transfer over an analog phone line. The principal features of the SI2456-FT include a 3 V to 3.6 V supply range, 56 kbps maximum data rate, V.42bis and MNP2-5 error correction, automatic rate negotiation, parallel phone detection, and overcurrent protection. Its lead-free 24-TSSOP package supports conventional surface-mount assembly while exposing the device in the system-side modem format identified by the SI2456-FT ordering code. Technically, the device combines modem signal processing with an integrated global DAA. The DAA provides the telephone-line termination and isolation functions required for connected-line operation, while protocol support covers the principal ITU-T and Bell modem recommendations listed for the component. Automatic rate negotiation allows the modem to select an appropriate bearer rate from the capabilities of the connected endpoint, and V.42bis/MNP2-5 support improves transmission reliability on noisy lines. Typical uses include point-of-sale terminals, industrial data-collection equipment, remote telemetry systems, embedded telephone-network access, and legacy equipment requiring a Bell or ITU-T modem connection. The SI2456-FT is particularly appropriate where a compact surface-mount solution and integrated line isolation are more important than a high-speed broadband data interface. Designers should verify the exact board layout, external network-interface components, and firmware requirements against the manufacturer datasheet before production. Because this is an integrated line-side modem chipset, PCB creepage, isolation, grounding, and telephone-network compliance require careful implementation; substitution should never be based on package appearance alone. This page consolidates verified specifications, sourcing information, replacement guidance, and design considerations for the SI2456-FT. It also distinguishes a documented same-package family alternative from unverified substitutes, helping engineers make a defensible legacy-modem sourcing decision.

RFQ پەیوەندی