بەرهەمەکان (5,100+)

SI2457-C-FS - 56 kbps V.90 ISO Modem | Skyworks
SI2457-C-FS

SI2457-C-FS - 56 kbps V.90 ISO Modem | Skyworks

The Skyworks Solutions SI2457-C-FS is a 56 kbps V.90 system-side ISOmodem integrated circuit that supports V.21, V.22, V.23, V.32, V.34 and V.90 data rates, along with Bell 103 and Bell 212A operation, in a 16-pin SOIC package. It provides the modulation and demodulation functions required to connect a digital data terminal or host interface to an analog telephone, fax or other analog line interface. An ISOmodem is a communications controller that divides a legacy analog modem into a digital controller and an analog interface function. The system-side SI2457-C-FS is intended to work with a complementary line-side codec or data access arrangement, allowing modulation and demodulation to be implemented in a multi-chip telephony system. It supports two packet structures defined by ETSI ES 201 912. Key capabilities include V.90 operation at 56 kbps, support for Bell 103 and Bell 212A signaling, and compatibility with the common V-series modem protocols listed in the product documentation. The device is specified in a 16-SOIC surface-mount package and is identified by the SI2457-C-FS ordering code. Its commercial temperature grade and gull-wing terminal arrangement are confirmed by distributor catalog data. The SI2457 family also includes related devices such as the SI2404, SI2415 and SI2434, all documented in the manufacturer data sheet. This family-level commonality allows engineers to evaluate different combinations of line-side codec, system-side modem and protocol support when designing analog terminal equipment, multi-rate fax systems or embedded telephone interfaces. Typical implementations place the SI2457-C-FS beside a line-side codec, host processor and telephone-line protection network. The host processor manages signaling and higher-layer protocol handling, while the SI2457-C-FS performs the bit-level modulation and demodulation required by the selected V-series mode. Exact supply voltage, interface timing and power consumption must be confirmed in the manufacturer data sheet before schematic release. When laying out this device, use the pin-description table and recommended application circuit in the manufacturer data sheet to assign the analog, digital and power pins. Pay particular attention to clocking, analog signal routing and the relationship between the system-side modem and the companion line-side device. This page organizes the confirmed protocol, package and sourcing information for the SI2457-C-FS, adds application guidance for telephony and data-terminal designs, and identifies the family-level options that are most relevant when evaluating an analog modem subsystem.

RFQ پەیوەندی
SI2457-C-FT 56 kbps V.90 Modem | Skyworks Solutions Inc.
SI2457-C-FT

SI2457-C-FT 56 kbps V.90 Modem | Skyworks Solutions Inc.

Skyworks Solutions Inc. SI2457-C-FT is a 56 kbps data modem IC operating from a 3 V to 3.6 V supply in a 24-pin TSSOP package. It supports Bell and ITU-T modem formats including V.21, V.22, V.23, V.32, V.34, and V.90, with parallel phone detection and more than 6000 V of capacitive isolation. The device is associated with the Si2457/34/15/04 ISOmodem family of integrated data access arrangements. An integrated modem or data access arrangement converts serial digital data into line-frequency signaling compatible with telephone, fax, or data equipment. The SI2457-C-FT combines modulation, data-access, and telephone-line interface functions in one IC, reducing the number of external components required for a conventional modem design. It belongs to the modem IC hierarchy within interface integrated circuits, where protocol conversion and physical-line signaling connect digital hosts to analog communication networks. Key features include support for data rates through 56 kbps, automatic rate negotiation using MNP2-5, V.42bis error correction, parallel phone detection, DTMF detection, and a built-in phase-locked loop. Its 3.3 V operating point suits modern 3 V digital systems, while the integrated DAA provides galvanic separation from the telephone line through capacitive isolation. The commercial-temperature rating supports indoor telecom, industrial control, fax, and data-communication equipment. Technically, the SI2457-C-FT is a system-side modem solution rather than a general-purpose transceiver. Its protocol support allows a host processor to establish modem connections across PSTN or equivalent line systems. The built-in phase-locked loop supports stable symbol timing, and the integrated telephone-interface functions simplify the analog line path. Designers should still account for line protection, regional impedance requirements, coupling components, and the complete reference circuit described in the manufacturer data sheet. Typical uses include legacy fax equipment, remote-access terminals, industrial monitoring links, embedded telephone interfaces, point-of-sale systems, and communications equipment that must support both V.21-class low-speed data and V.90-class 56 kbps operation. The broad protocol set makes the IC useful where interoperability with older telephone infrastructure matters more than raw data throughput or a modern packet-based interface. A critical design consideration is the telephone-line interface. The manufacturer data sheet specifies the external component values, isolation network, hook and phone-detection circuitry, and layout constraints required for reliable operation. Keep sensitive line-side routing compact, provide the specified protection network, and observe the required creepage and clearance distances for the intended installation class. This product page consolidates the SI2457-C-FT electrical characteristics, package information, protocol capabilities, application guidance, and confirmed same-package alternatives. It also highlights practical distinctions among closely related Si2457-family devices so engineers can assess footprint reuse, modem features, and implementation constraints before placing a part on a new design.

RFQ پەیوەندی
SI2457-C-GT - 56 kbps V.90 ISOmodem | Silicon Laboratories
SI2457-C-GT

SI2457-C-GT - 56 kbps V.90 ISOmodem | Silicon Laboratories

Silicon Laboratories SI2457-C-GT is a 56 kbps V.90 ISOmodem system-side codec IC for data communication over the Public Switched Telephone Network. It supports V.21, V.22, V.23, V.32, V.34, and V.90 data formats, along with Bell 103 and Bell 212A, and operates from a 3.0 V to 3.6 V supply in a 24-pin TSSOP package. The SI2457-C-GT also provides parallel phone detection and capacitive isolation exceeding 6000 V. An ISOmodem is a complete modem chipset for analog telephone-line data communication. The system-side member handles modulation, demodulation, data formatting, and telephone-line interface functions, while a separate global line-side device connects to the analog network. Within the product hierarchy, the SI2457-C-GT is an ISOmodem codec IC, interface IC, communications IC, and semiconductor intended for embedded data modem designs. The device combines support for legacy ITU-T modem standards with automatic rate negotiation, MNP2-5 error correction, and V.42bis compression. These features allow embedded equipment to negotiate supported connection rates and maintain reliable data transfer across variable telephone-line conditions. Its protocol coverage includes the commonly encountered V.32 and V.34 rates in addition to the top 56 kbps V.90 operating rate. The SI2457-C-GT is housed in a compact 24-pin TSSOP measuring 0.173 inches, or 4.40 mm, in width. Surface-mount construction supports automated PCB assembly, while the tube package is intended for protected component handling before board population. A 3.3 V nominal supply keeps the interface compatible with conventional 3.3 V embedded systems, although the complete modem system must also account for line-side interface requirements. Typical uses include industrial data collection terminals, remote monitoring equipment, point-of-sale systems, legacy telecom appliances, and embedded controllers that retain a PSTN modem interface. Parallel phone detection can assist equipment in distinguishing an active data call from an incoming voice call when the surrounding line interface supports that function. Designers should treat the SI2457-C-GT as part of a complete ISOmodem chipset rather than a stand-alone network interface. The companion line-side device, crystal and timing components, analog telephone interface, isolation network, and power design must match the system-level modem architecture. Check the 24-pin pin-description table and reference schematic in the manufacturer datasheet before assigning PCB nets. This product page combines protocol, package, lifecycle, sourcing, and replacement information into a design-focused reference. It also highlights same-footprint alternatives, practical integration considerations, and the specific functional features engineers should verify when selecting the SI2457-C-GT for a legacy PSTN modem design.

RFQ پەیوەندی
SI2457-D-FS - 56 kbps ISOmodem IC | Skyworks Solutions
SI2457-D-FS

SI2457-D-FS - 56 kbps ISOmodem IC | Skyworks Solutions

The Skyworks Solutions Inc. SI2457-D-FS is a 56 kbps system-side ISOmodem integrated circuit operating from a 3.3 V supply in a 16-pin SOIC package. It supports ITU-T V.21, V.22, V.23, V.32, V.34 and V.90 signaling, Bell 103 and Bell 212A operation, and related data-modem formats. The device combines modulation and demodulation functions with on-chip modem firmware for embedded telephone-line data communication. An ISOmodem is a complete integrated data-modem circuit designed to operate with a separate telephone-network interface or data access arrangement. Within the product hierarchy, the SI2457-D-FS is a modem IC, a physical-layer data-communication IC, and an interface semiconductor. Its system-side architecture is intended for equipment that must generate and receive analog telephone-line signals while keeping protocol processing and line-interface functions under the control of embedded host hardware. Key capabilities include data rates through 56 kbps, automatic rate negotiation, Fast Connect operation, V.42bis error correction, MNP2-5 support, and Type I and Type II caller-ID decoding. The family also supports parallel phone detection and more than 6000 V of capacitive isolation. These functions allow one controller to connect with legacy analog modems, fax equipment, remote-access systems, and other products that still rely on switched telephone networks. The Si2457/34/15/04 family architecture includes on-chip program ROM containing firmware for the documented features, together with program RAM for minor firmware changes. The SI2457-D-FS designation identifies the SI2457 member and Revision D device configuration. Its 3.3 V operation suits modern embedded systems, while the 16-pin SOIC package supports conventional surface-mount assembly and compact peripheral-interface layouts. Typical uses include industrial serial-to-telephone gateways, remote monitoring equipment, data-over-voice terminals, legacy controller migration projects, and telephone-line access modules. Designers can use the modem circuit with a line-interface network, isolation components, and a host processor that implements the required data framing and control protocol. The V.90 capability is particularly useful for low-rate connections where compatibility matters more than maximum throughput. Designers should follow the manufacturer datasheet for the external line-interface network, crystal requirements, supply bypassing, and exposed-ground configuration. The 0 to 70 C operating range is suitable for commercial indoor equipment but not for extended industrial-temperature environments. PCB signal integrity also matters because modem timing, isolation boundaries, and telephone-line return paths can introduce noise if layout guidance is not followed. This page combines the manufacturer data-sheet details, interface-function breakdown, packaging constraints, application guidance, and selection criteria in one engineering-focused reference. It also identifies where a true pin-to-pin replacement must be checked against the complete electrical interface rather than inferred from the data rate or package name alone.

RFQ پەیوەندی
SI2457-D-GT - 56 kbps ISOMODEM | Skyworks Solutions
SI2457-D-GT

SI2457-D-GT - 56 kbps ISOMODEM | Skyworks Solutions

Skyworks Solutions Inc. SI2457-D-GT is a 56 kbps system-side ISOMODEM data-communication IC operating from a 3.3 V supply and housed in a 24-pin TSSOP package. It supports ITU-T and Bell modem formats including V.21, V.22, V.23, V.32, V.34, V.90, Bell 103, and Bell 212A, with additional V.42, V.42bis, V.44, MNP2-5, and caller-ID functions documented for the Si2457/34/15/04 family. An ISOMODEM is a semiconductor implementation of a modem's modulation, demodulation, and protocol functions. It belongs to the modem IC hierarchy, integrates data-link signaling with a host-facing controller interface, and is commonly positioned between a host processor and a telephone or data-network interface. Its primary design purpose is to reproduce standardized modem signaling without requiring a discrete modem subsystem. The SI2457-D-GT supports data rates from Bell 300 bps through 56 kbps, automatic rate negotiation, Type I and Type II caller-ID decoding, and parallel, UART, or SPI host interfaces. Its on-chip program ROM provides the firmware for the documented features, while program RAM permits minor firmware changes. Flexible clocking includes a low-cost 32.768 kHz oscillator option and a 4.915 MHz clock option. The device includes global capacitive isolation rated at more than 6,000 V and parallel phone detection. These characteristics allow the modem circuitry to interface with a telephone line while maintaining separation between line-side and logic-side functions. The SI2457 family is intended for interoperable data communications where V-series protocols, caller identification, and a compact controller implementation are required. Typical uses include embedded modems, fax equipment, data terminals, industrial communication equipment, and telephone-line data products. Designers should select the interface mode and clock arrangement that match the host controller and line interface, and should use the manufacturer pin-description table when assigning PCB nets. A key design consideration is that a shared 24-pin TSSOP footprint does not by itself guarantee firmware-level interchangeability. Review the protocol list, clock requirements, interface selection, isolation implementation, and exact orderable suffix before treating another device as a replacement. This page combines the manufacturer's Revision D family datasheet, distributor identification, supported protocol details, package information, and practical replacement criteria to support component selection, PCB planning, and sourcing.

RFQ پەیوەندی
SI2493-C-FS 56 kbps V.92 ISOmodem | Skyworks Solutions
SI2493-C-FS

SI2493-C-FS 56 kbps V.92 ISOmodem | Skyworks Solutions

The Skyworks Solutions Inc. SI2493-C-FS is a 56 kbps V.92 ISOmodem system-side interface IC supporting V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, and Bell 212A data formats. The device is packaged in a 16-pin SOIC measuring 0.154 inch by 0.390 inch and is supplied in a tube. A V.92 ISOmodem is a system-side data communications controller designed to connect a host or embedded system with a telephone network interface. In the ISOmodem architecture, the SI2493-C-FS handles modem signal processing and data modulation while an external data access arrangement supports computer-side connectivity. It belongs to the broader hierarchy of modem IC, network interface controller, interface IC, and semiconductor. The principal feature of the SI2493-C-FS is its combination of legacy and V.90/V.92 modulation support in one integrated device. Its listed formats include V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, and Bell 212A. The 56 kbps V.92 operating rate and extensive protocol coverage make the device suitable for specialized data equipment that must interoperate with older telephone-network equipment. The 16-pin SOIC is offered as the footprint-compatible system-side implementation associated with the Si2401 ISOmodem family. This package option supports conventional surface-mount PCB assembly while retaining access to the modem functions required by compact embedded and industrial data products. The suffix identifies a specific ordering configuration; the manufacturer datasheet remains the controlling document for electrical limits, clocking, interface behavior, and application wiring. Typical uses include legacy modem pools, industrial data communication equipment, telephone-line monitoring systems, point-of-sale terminals, and embedded access products requiring Bell or V-series compatibility. Because V.92 modem designs include analog telephone-line characteristics, component selection must account for the external line interface, isolation, filtering, ring detection, and the host-side communication requirements of the complete system. For a new PCB, use the 16-pin SOIC footprint and follow the manufacturer pin-description table and typical application circuit. Do not assume that footprint compatibility alone guarantees functional interchangeability. Review clock requirements, supply sequencing, interface signals, country-specific line-network behavior, and external analog components before transferring an existing design to SI2493-C-FS. This product page combines the manufacturer data-sheet information, interface and package characteristics, protocol coverage, verified sourcing records, and practical implementation guidance. It also distinguishes explicitly documented replacements from merely similar modem ICs so engineers can assess PCB reuse, protocol support, and system-level risk before making a sourcing decision.

RFQ پەیوەندی
SI2493-C-FSR 56 kbps V.92 ISOmodem | Skyworks Solutions (Tape & Reel)
SI2493-C-FSR

SI2493-C-FSR 56 kbps V.92 ISOmodem | Skyworks Solutions (Tape & Reel)

The Skyworks Solutions Inc. SI2493-C-FSR is a 56 kbps V.92 ISOmodem system-side interface IC supporting V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, and Bell 212A data formats. The device is packaged in a 16-pin SOIC measuring 0.154 inch by 0.390 inch and is supplied in a tube. A V.92 ISOmodem is a system-side data communications controller designed to connect a host or embedded system with a telephone network interface. In the ISOmodem architecture, the SI2493-C-FSR handles modem signal processing and data modulation while an external data access arrangement supports computer-side connectivity. It belongs to the broader hierarchy of modem IC, network interface controller, interface IC, and semiconductor. The principal feature of the SI2493-C-FSR is its combination of legacy and V.90/V.92 modulation support in one integrated device. Its listed formats include V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, and Bell 212A. The 56 kbps V.92 operating rate and extensive protocol coverage make the device suitable for specialized data equipment that must interoperate with older telephone-network equipment. The 16-pin SOIC is offered as the footprint-compatible system-side implementation associated with the Si2401 ISOmodem family. This package option supports conventional surface-mount PCB assembly while retaining access to the modem functions required by compact embedded and industrial data products. The suffix identifies a specific ordering configuration; the manufacturer datasheet remains the controlling document for electrical limits, clocking, interface behavior, and application wiring. Typical uses include legacy modem pools, industrial data communication equipment, telephone-line monitoring systems, point-of-sale terminals, and embedded access products requiring Bell or V-series compatibility. Because V.92 modem designs include analog telephone-line characteristics, component selection must account for the external line interface, isolation, filtering, ring detection, and the host-side communication requirements of the complete system. For a new PCB, use the 16-pin SOIC footprint and follow the manufacturer pin-description table and typical application circuit. Do not assume that footprint compatibility alone guarantees functional interchangeability. Review clock requirements, supply sequencing, interface signals, country-specific line-network behavior, and external analog components before transferring an existing design to SI2493-C-FSR. This product page combines the manufacturer data-sheet information, interface and package characteristics, protocol coverage, verified sourcing records, and practical implementation guidance. It also distinguishes explicitly documented replacements from merely similar modem ICs so engineers can assess PCB reuse, protocol support, and system-level risk before making a sourcing decision.

RFQ پەیوەندی
SI2493-C-FT 56 kbps ISOModem | Skyworks | 24-TSSOP
SI2493-C-FT

SI2493-C-FT 56 kbps ISOModem | Skyworks | 24-TSSOP

Skyworks Solutions SI2493-C-FT is a system-side ISOmodem network controller and processor IC supporting V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92 data formats, Bell 103 and Bell 212A signaling, and a maximum data rate of 56 kbps. The device is packaged in a 24-TSSOP package. An ISOmodem is a mixed-signal communications IC that combines modem signal processing with a controller and host-side interface functions. Within the semiconductor hierarchy, it belongs to the modem and network-controller category, while also functioning as a transceiver for analog telephone-line signaling. Such devices provide a hardware interface between a host processor and a communications channel, reducing the amount of modem signal-processing software required in the host. The SI2493-C-FT supports several ITU V-series and V.92-related data formats together with Bell 103 and Bell 212A modes. This multi-format capability makes it relevant to telephone-line data equipment, embedded data communication systems, and legacy access-device designs. Its stated 56 kbps operating rate places it in the low-speed modem class rather than broadband, Ethernet, or high-speed DSL transceiver categories. The 24-TSSOP package provides a standardized surface-mount form factor with leads on both sides of the package. The SI2493-C-FT is identified with the -C-FT ordering suffix and is supplied in tube packaging according to the package information associated with the part. Because modem performance depends on the complete line interface, external circuitry, crystal requirements, isolation strategy and host configuration, designers should evaluate the device against the exact manufacturer datasheet and reference circuit rather than infer those details from the family name alone. Typical uses include compact customer-premises equipment, telephone-line data controllers, embedded communication appliances and data-over-voice terminal equipment. In these systems, the IC can perform modulation and demodulation while the host manages the application, connection policy and user interface. The final system still requires careful separation of the analog line interface from sensitive digital circuitry. For layout, place the modem and associated line-interface components according to the manufacturer reference design, with particular attention to analog ground, supply decoupling and copper return paths. Use controlled impedance routing for digital interfaces where applicable, and avoid introducing long loops around the telephone-line interface. Verify thermal performance, regulatory constraints and line-interface component ratings for the deployment region. This page consolidates the SI2493-C-FT ordering information, supported data formats, package details, replacement guidance and engineering-selection considerations into a compact design reference. It also identifies the verified direct substitute and highlights which electrical and pin-level details must be confirmed in the manufacturer datasheet before a new layout or production release.

RFQ پەیوەندی
SI2493-C-GT - 56 kbps V.92 Modem IC | 24-TSSOP
SI2493-C-GT

SI2493-C-GT - 56 kbps V.92 Modem IC | 24-TSSOP

The Skyworks Solutions SI2493-C-GT is a 56 kbps V.92 system-side ISOmodem integrated circuit designed for data transmission over analog telephone lines. It supports V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, and Bell 212A data formats, giving it broad compatibility with legacy fax, modem, and remote-communications equipment. The device is packaged in a 24-pin TSSOP measuring approximately 4.40 mm wide and is supplied in a tube. An ISOmodem is a single-chip implementation of the International Telecommunications Union modem recommendations used to move data across the Plain Old Telephone Service network. This integration combines modem signal processing, line-interface functions, and data-control logic in one device, reducing the component count and board area needed for a complete analog-line data modem. The 56 kbps V.92 operating mode places the SI2493-C-GT in the class of devices used for high-speed analog access, remote diagnostics, and legacy data-collection equipment. The principal feature is its multi-standard protocol support within one package. V.21 through V.34 cover lower-rate asynchronous and synchronous modes, while V.90, V.92, Bell 103, and Bell 212A address widely deployed analog modem standards. This range allows a single board design to interoperate with equipment using different fallback rates and modulation formats. The 56 kbps V.92 data rate is the headline operating specification used to classify the part in distributor catalogs. The 24-TSSOP package is intended for surface-mount assembly and provides a compact solution for equipment where analog telephone-line connectivity must coexist with digital control logic. Its narrow TSSOP body supports automated PCB assembly, while a tube package matches prototype and moderate-volume production workflows. Board-level implementation still requires external line-interface components, isolation or protection appropriate to the target interface, bypass capacitors, and a controller able to service the modem registers. For system designers, the SI2493-C-GT is most relevant when maintaining a legacy modem endpoint, building remote monitoring equipment, or supporting copper-line data transmission where endpoint compatibility matters more than modern broadband connectivity. A careful interface review should confirm line-rate requirements, supported modulation modes, host-bus expectations, and the external analog network requirements before the PCB is released. This page consolidates the verified catalog information for the SI2493-C-GT, places its protocol capabilities in engineering context, and distinguishes verified facts from parameters that must be confirmed in the manufacturer datasheet before layout or firmware development.

RFQ پەیوەندی
SI2493-D-FS - 56 kbps V.92 ISOmodem | Skyworks Solutions
SI2493-D-FS

SI2493-D-FS - 56 kbps V.92 ISOmodem | Skyworks Solutions

The Skyworks Solutions SI2493-D-FS is a complete ITU V.92-compliant system-side ISOmodem that supports full-duplex data connections at rates up to 56,000 bps over the Public Switched Telephone Network. It is supplied in a 16-pin SOIC package and integrates a global data access arrangement for telephone-line modem designs. An ISOmodem is a modem controller and data-access arrangement integrated into one semiconductor. In this architecture, the controller processes modulation protocols and line-interface functions while the data access arrangement connects the modem to the telephone network. ISOmodems are used when a system needs legacy PSTN connectivity in a compact, integrated implementation rather than a collection of separate modem, codec, and interface circuits. The SI2493-D-FS supports ITU-T V.21, V.22, V.23, V.29, V.32, V.34, V.90, and V.92 data formats. Its data set also includes Bell 103 and Bell 212A formats, V.44 compression with V.42, V.42bis, and MNP2-5 support, automatic rate negotiation, PCM upstream operation, and V.92 quick connect. The combination of V.92 data rates and quick-connect functionality targets systems requiring faster modem call establishment over analog telephone lines. The device uses a complete modem architecture for full-duplex PSTN operation, with conventional data formats supported through 56,000 bps. This makes it suitable for embedded data collection, remote equipment access, point-of-sale terminals, and industrial controllers that must communicate with legacy analog telephone infrastructure. The integrated global DAA reduces the number of discrete telephone-interface components required in a conventional modem design. The SI2493-D-FS is specified in a 16-pin SOIC package for surface-mount assembly. Circuit implementation requires attention to the telephone-line interface, isolation requirements, analog signal routing, and the power connections defined by the manufacturer datasheet. Use the published reference design and pin-description table when assigning PCB nets because analog telephone nodes must not be routed like ordinary digital signals. This page organizes the SI2493-D-FS protocol capabilities, package details, application guidance, and practical design considerations for engineers evaluating legacy PSTN connectivity. It also distinguishes documented device attributes from parameters that require confirmation from the full manufacturer datasheet before schematic release or production qualification.

RFQ پەیوەندی
SI2493-D-FT - 56 kbps V.92 ISOmodem | Skyworks
SI2493-D-FT

SI2493-D-FT - 56 kbps V.92 ISOmodem | Skyworks

Skyworks Solutions Inc. SI2493-D-FT is a 56 kbps V.92 ISOmodem system-side integrated circuit designed for full-duplex data transmission over the Public Switched Telephone Network. It supports conventional V-series modem formats, V.92 functions, Bell 103 and Bell 212A operation, and automatic rate negotiation. The device is housed in a 24-pin TSSOP package for surface-mount assembly. An ISOmodem is a complete integrated modem solution that combines data-path modulation, telephone-interface functions, and system-side control in one IC. In the telecommunications hierarchy, the SI2493-D-FT belongs to the modem-controller and network-interface class of integrated circuits. Its purpose is to let a host processor exchange synchronized digital data with a legacy analog telephone line without requiring a large collection of discrete codec, filter, and interface components. The SI2493-D-FT supports ITU V.21, V.22, V.23, V.29, V.32, V.34, and V.90 operation, together with V.92 features. The Skyworks data sheet also identifies V.42bis, MNP2-5, automatic rate negotiation, V.92 PCM upstream, V.92 Quick Connect, and modem-on-hold capabilities. Bell 103 and Bell 212A compatibility broadens interoperability with older terminal equipment and network services. Revision D represents the documented version of the SI2493 design used by this component. The global DAA interface supports connection of the modem to a telephone network, while the data-side interface provides the path between the modem and host equipment. The SI2493-D-FT also incorporates a 6000 V capacitive isolation rating in its documented feature set, making isolation-aware circuit design an important part of telephone-interface implementation. Typical uses include PSTN data terminals, industrial serial-to-telephone gateways, remote monitoring controllers, legacy equipment retrofits, embedded telephone adapters, and data communication equipment supporting older Bell and ITU protocols. Its 56 kbps maximum connect rate targets data applications where backward-compatible analog telephone access is required rather than broadband connectivity. The primary design consideration is line-interface implementation. The host PCB must preserve the modem data interface, provide the required clocking and control signals, and implement the DAA network connection with appropriate isolation, surge protection, and hook-state handling. Use the pin-description and typical application diagrams in the Skyworks Solutions data sheet when assigning package pins and selecting external telephone-network components. This page combines protocol capabilities, package information, drop-in replacement findings, and practical design guidance. It helps engineers distinguish revision and ordering differences while identifying the electrical and thermal checks required before incorporating this legacy-PSTN modem into a new design.

RFQ پەیوەندی
SI2493-D-GT - 56 kbps V.92 ISOmodem | Skyworks
SI2493-D-GT

SI2493-D-GT - 56 kbps V.92 ISOmodem | Skyworks

Skyworks Solutions SI2493-D-GT is a 56 kbps V.92 ISOmodem system-side modem controller designed for full-duplex data over the Public Switched Telephone Network. The device supports ITU V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92 modem formats, as well as Bell 103 and Bell 212A formats. It is supplied in a 24-pin TSSOP package. An ISOmodem is a single-chip implementation of a modem and its associated interface functions. The system-side Si2493 combines data modulation and demodulation with the telephone-line interface required by a global DAA design. This makes it part of the broader modem controller and processor IC category, used to connect embedded equipment to legacy PSTN services without requiring a separate external data-access arrangement. Revision D of the Si2493 supports conventional modem data formats with connection rates reaching 56,000 bps. Its listed protocol set includes V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92, together with Bell 103 and Bell 212A. Additional listed capabilities include automatic rate negotiation, V.44, V.42, V.42bis, MNP2-5, PCM upstream and V.92 Quick Connect. These functions allow the controller to negotiate compatible operating modes with the connected telephone network. The device includes on-chip program ROM containing the firmware required for the documented features. It also includes on-chip program RAM for minor changes to ROM firmware. This combination provides a self-contained modem solution and offers a degree of field-update flexibility, while the exact RAM-based modification process remains subject to the manufacturer's programming and system-integration guidance. Typical implementations use the Si2493 in telephone terminal equipment, data communication devices and embedded PSTN access products. The 24-pin TSSOP SI2493-D-GT is appropriate when a design specifically requires this package, while the Si2493 family also includes a 16-pin SOIC option. The 16-pin version is footprint-compatible with the Si2401 ISOmodem and is identified by the manufacturer as the recommended option for most applications. Circuit design should follow the complete Si2493 datasheet for clocking, line-interface implementation, power sequencing and external component selection. Designers should also allow for the global DAA requirements of the target country, including the applicable line-interface and regulatory network requirements. The Si2493 handles the modem protocol layer, but line termination, protection, isolation and PSTN approval remain separate system-level design tasks. This product page combines the manufacturer's protocol and package information with practical application guidance, lifecycle-oriented sourcing information and a strict review of drop-in alternatives. It is intended to help engineers distinguish the 24-pin system-side implementation from the 16-pin SOIC family member and plan a compliant, testable PSTN interface without assuming that a different package or electrically unrelated controller can serve as a direct replacement.

RFQ پەیوەندی
SI2494-A-GM 56 kbps V.92 Modem IC | Skyworks Solutions
SI2494-A-GM

SI2494-A-GM 56 kbps V.92 Modem IC | Skyworks Solutions

The Skyworks Solutions SI2494-A-GM is a 56 kbps system-side ISOmodem data communications controller supporting ITU-T V.21, V.22, V.29, V.32, V.34, V.42, V.42bis, V.44, and V.92 data modem formats, with Bell 300 bps support, MNP2-5, Fast Connect, and V.92 Quick Connect. The device is packaged in a 38-pin QFN with exposed pad measuring 5 mm by 7 mm. A data modem IC converts serial data into modulation formats suitable for analog telephone, fax, and legacy WAN connections. The SI2494-A-GM belongs to the controller and processor class of integrated circuits, combining protocol handling, caller-ID decoding, rate negotiation, and host-interface control in one device. Its system-side architecture is intended for embedded equipment that connects a host processor to an analog line interface. Key capabilities include operation up to 56 kbps under V.92, support for V.42 and V.42bis error correction, MNP2-5 automatic rate negotiation, V.92 PCM upstream operation, and Type I and Type II caller-ID decoding. The host can connect through UART, SPI, or a parallel interface, allowing integration with different embedded controller architectures. The chip also accepts flexible clocking options and can use a low-cost 32.768 kHz oscillator. The SI2494-A-GM avoids external ROM or RAM for its modem functions, reducing the number of supporting components required around the data path. Bell 300 bps operation and the broader ITU-T format set preserve compatibility with older terminal equipment, while V.92 support enables higher-rate analog data sessions where the connected line and service support it. Typical applications include industrial data terminals, point-of-sale systems, remote-access equipment, fax machines, telephone-interface gateways, and embedded modem modules. The 38-QFN package is suitable for compact surface-mount assemblies, but careful treatment of the exposed thermal pad and high-speed clock and interface routing is important for dependable operation. Design the supply, analog-line interface, clock source, and host interface according to the manufacturer reference schematic. Keep the exposed-pad connection unobstructed, follow the recommended decoupling arrangement, and validate timing margins across all three supported host-interface modes. Firmware must also select the correct regional modem profile, negotiated rate, and V.92 capability. This product guide combines the confirmed modem features, package information, interface choices, and application guidance with practical replacement and design context. Use the manufacturer datasheet pin-description table and reference circuit when assigning PCB tracks and selecting external analog-line components.

RFQ پەیوەندی
SI2535-F-FS - 16-SOIC ISOmodem | Skyworks Solutions
SI2535-F-FS

SI2535-F-FS - 16-SOIC ISOmodem | Skyworks Solutions

Skyworks Solutions SI2535-F-FS is a modem interface IC identified as a line-side processor with an integrated system-side fax ISOmodem. It is packaged in a 16-pin SOIC and belongs to the telecom interface IC category. The component is intended for equipment that requires a dedicated analog telephone-line interface, modem signal processing, or system-side fax connectivity rather than a general-purpose data-conversion function. A modem interface IC forms the boundary between a host processor and a communications channel. In this role, the device handles line-oriented signaling and modem-related functions while the surrounding processor manages higher-level data exchange and protocol processing. The SI2535-F-FS combines line-side processor functionality with an integrated system-side fax ISOmodem, allowing a fax-oriented communications path to be added to a telephone interface design without requiring every modem function to be implemented in system firmware. The SI2535-F-FS uses a 16-pin SOIC package, a surface-mount format compatible with conventional board assembly and automated production processes. Its exact pin assignments, electrical limits, clock requirements, line-interface parameters, operating-temperature range, and power-consumption figures must be confirmed against the manufacturer datasheet before schematic release or PCB layout approval. Particular attention should be given to analog line-side connections, grounding, external component requirements, and any clock or interface dependencies shown in the application schematic. Potential uses include multifunction fax equipment, fax-modem cards, embedded telephone systems, industrial data-communications equipment, and legacy communications controllers that rely on a dedicated ISOmodem function. A system architect should compare these requirements with the manufacturer’s supported operating modes, line standard, and processor interface before selecting the part. The device is also relevant to repair and modernization programs where an existing board uses the same 16-SOIC footprint and requires an exact pin-compatible substitute. Design work should begin with the manufacturer pin-description table and reference application circuit. Confirm whether the selected PCB uses a leaded 16-SOIC footprint, validate every signal direction and supply requirement, and reproduce the prescribed external network and decoupling components. Since SI2535-F-FS is a specialized telecom interface device, careful signal-integrity and line-isolation review is more valuable than generic IC layout guidance. This product record combines the verified device identity, package form, modem-interface classification, distributor listings, and drop-in replacement analysis. It also highlights the engineering details that should be checked against the manufacturer datasheet before schematic release, including the complete pinout, electrical ratings, application support, and compatibility of any proposed replacement.

RFQ پەیوەندی
SI2535-F-FSR - 16-SOIC ISOmodem | Skyworks Solutions (Tape & Reel)
SI2535-F-FSR

SI2535-F-FSR - 16-SOIC ISOmodem | Skyworks Solutions (Tape & Reel)

Skyworks Solutions SI2535-F-FSR is a modem interface IC identified as a line-side processor with an integrated system-side fax ISOmodem. It is packaged in a 16-pin SOIC and belongs to the telecom interface IC category. The component is intended for equipment that requires a dedicated analog telephone-line interface, modem signal processing, or system-side fax connectivity rather than a general-purpose data-conversion function. A modem interface IC forms the boundary between a host processor and a communications channel. In this role, the device handles line-oriented signaling and modem-related functions while the surrounding processor manages higher-level data exchange and protocol processing. The SI2535-F-FSR combines line-side processor functionality with an integrated system-side fax ISOmodem, allowing a fax-oriented communications path to be added to a telephone interface design without requiring every modem function to be implemented in system firmware. The SI2535-F-FSR uses a 16-pin SOIC package, a surface-mount format compatible with conventional board assembly and automated production processes. Its exact pin assignments, electrical limits, clock requirements, line-interface parameters, operating-temperature range, and power-consumption figures must be confirmed against the manufacturer datasheet before schematic release or PCB layout approval. Particular attention should be given to analog line-side connections, grounding, external component requirements, and any clock or interface dependencies shown in the application schematic. Potential uses include multifunction fax equipment, fax-modem cards, embedded telephone systems, industrial data-communications equipment, and legacy communications controllers that rely on a dedicated ISOmodem function. A system architect should compare these requirements with the manufacturer’s supported operating modes, line standard, and processor interface before selecting the part. The device is also relevant to repair and modernization programs where an existing board uses the same 16-SOIC footprint and requires an exact pin-compatible substitute. Design work should begin with the manufacturer pin-description table and reference application circuit. Confirm whether the selected PCB uses a leaded 16-SOIC footprint, validate every signal direction and supply requirement, and reproduce the prescribed external network and decoupling components. Since SI2535-F-FSR is a specialized telecom interface device, careful signal-integrity and line-isolation review is more valuable than generic IC layout guidance. This product record combines the verified device identity, package form, modem-interface classification, distributor listings, and drop-in replacement analysis. It also highlights the engineering details that should be checked against the manufacturer datasheet before schematic release, including the complete pinout, electrical ratings, application support, and compatibility of any proposed replacement.

RFQ پەیوەندی
SI3000-C-FS - 16-Bit Voice Codec | Skyworks Solutions
SI3000-C-FS

SI3000-C-FS - 16-Bit Voice Codec | Skyworks Solutions

Skyworks Solutions SI3000-C-FS is a 16-bit voice-band audio codec with a serial interface, programmable input and output gain or attenuation, microphone bias, a handset hybrid circuit, and output drive for 32-ohm headphones. The device operates from 3 V to 5.25 V and is packaged in a 16-pin SOIC. A voice-band audio codec converts analog voice signals into digital data for transmission and reconstructs digital audio into an analog signal for playback. The SI3000-C-FS integrates several telephone-interface functions that otherwise require separate components, including microphone amplification, output drive, microphone bias, and handset hybrid support. Its 16-bit serial interface allows it to connect with compatible modem and data-access-arrangement devices. Programmable input and output gain or attenuation provide control over signal levels in analog voice paths. The integrated microphone bias circuit supports microphone-based input stages, while the output driver is specified for 32-ohm headphones. These functions reduce the number of external analog components required in a voice-band interface. The SI3000 family is intended for voice-band equipment, including ISOmodem and digital access equipment. The SI3000-C-FS can connect directly to Si3035, Si3044, and Si3056 North American and international DAA chipsets through the serial interface, allowing an analog voice path to be paired with an established line-interface chipset. Supply-voltage operation from 3 V to 5.25 V makes the codec usable in 3.3 V and 5 V systems. The listed operating-temperature range is 0 C to 70 C. Because this is a mixed analog-and-serial-interface device, correct grounding, supply decoupling, clock implementation, and layout of the voice path directly affect signal integrity and audio performance. For a new design, use the manufacturer pin-description table and recommended application circuit when assigning PCB tracks, setting gain, and selecting support components. Pay particular attention to analog and digital return paths, the microphone-bias connection, and the output-drive network. The 16-pin SOIC footprint supports conventional surface-mount assembly but requires adequate copper and thermal considerations for reliable soldering. This page combines device capabilities, application fit, sourcing guidance, and practical design notes to help engineers evaluate the SI3000-C-FS for compact voice-band systems. It also distinguishes verified compatibility from unknown replacement options so procurement decisions can be based on package, interface, and electrical requirements rather than MPN similarity alone.

RFQ پەیوەندی
SI3000-C-FSR - 16-Bit Voice Codec | Skyworks Solutions (Tape & Reel)
SI3000-C-FSR

SI3000-C-FSR - 16-Bit Voice Codec | Skyworks Solutions (Tape & Reel)

Skyworks Solutions SI3000-C-FSR is a 16-bit voice-band audio codec with a serial interface, programmable input and output gain or attenuation, microphone bias, a handset hybrid circuit, and output drive for 32-ohm headphones. The device operates from 3 V to 5.25 V and is packaged in a 16-pin SOIC. A voice-band audio codec converts analog voice signals into digital data for transmission and reconstructs digital audio into an analog signal for playback. The SI3000-C-FSR integrates several telephone-interface functions that otherwise require separate components, including microphone amplification, output drive, microphone bias, and handset hybrid support. Its 16-bit serial interface allows it to connect with compatible modem and data-access-arrangement devices. Programmable input and output gain or attenuation provide control over signal levels in analog voice paths. The integrated microphone bias circuit supports microphone-based input stages, while the output driver is specified for 32-ohm headphones. These functions reduce the number of external analog components required in a voice-band interface. The SI3000 family is intended for voice-band equipment, including ISOmodem and digital access equipment. The SI3000-C-FSR can connect directly to Si3035, Si3044, and Si3056 North American and international DAA chipsets through the serial interface, allowing an analog voice path to be paired with an established line-interface chipset. Supply-voltage operation from 3 V to 5.25 V makes the codec usable in 3.3 V and 5 V systems. The listed operating-temperature range is 0 C to 70 C. Because this is a mixed analog-and-serial-interface device, correct grounding, supply decoupling, clock implementation, and layout of the voice path directly affect signal integrity and audio performance. For a new design, use the manufacturer pin-description table and recommended application circuit when assigning PCB tracks, setting gain, and selecting support components. Pay particular attention to analog and digital return paths, the microphone-bias connection, and the output-drive network. The 16-pin SOIC footprint supports conventional surface-mount assembly but requires adequate copper and thermal considerations for reliable soldering. This page combines device capabilities, application fit, sourcing guidance, and practical design notes to help engineers evaluate the SI3000-C-FSR for compact voice-band systems. It also distinguishes verified compatibility from unknown replacement options so procurement decisions can be based on package, interface, and electrical requirements rather than MPN similarity alone.

RFQ پەیوەندی
SI3000-C-GS - 16-Bit Voice-Band Audio Codec | Skyworks
SI3000-C-GS

SI3000-C-GS - 16-Bit Voice-Band Audio Codec | Skyworks

The Skyworks Solutions Inc. SI3000-C-GS is a 16-bit voice-band audio codec with 84 dB ADC dynamic range, 84 dB DAC dynamic range, and 4–12 kHz sample rates in a 16-SOIC package. It integrates a 30 dB microphone preamplifier, programmable input and output gain or attenuation, microphone bias, handset hybrid circuitry, and output drive for 32 Ω headphones. A voice-band codec is a specialized audio interface that converts analog microphone or line-level signals into a digital serial stream and converts digital audio back into an analog output. Within the hierarchy of audio codecs, line codecs, audio interface ICs, and interface semiconductors, it concentrates several telephone and modem signal-chain functions into one device. Its narrowband sampling range is intended for speech rather than hi-fi music. The SI3000-C-GS provides one ADC and one DAC, both using 16-bit resolution. Programmable input and output gain or attenuation gives the system designer control over signal levels, while the 30 dB microphone preamplifier supports direct microphone conditioning. The integrated bias circuit reduces external microphone-support requirements, and the headset driver is specified for 32 Ω loads. Integration is a central advantage because the codec combines the analog voice interface, conversion functions, and telephone-support circuitry. According to the manufacturer datasheet, the device can connect directly with Si3034, Si3035, Si3044, and Si3056 data-access arrangements and chipsets. These interfaces support voice-band modem and telephone equipment where board area and component count are important constraints. Typical applications include voice-band modems, telephone interface boards, handsets, speakerphones, voicemail equipment, and data-access adapters. The 16-SOIC package also makes the SI3000-C-GS suitable for designs that require conventional surface-mount assembly rather than a high-density land grid array. When designing around this codec, verify the required analog supply, digital interface voltage, sampling clock, and serial device configuration against the manufacturer pin descriptions and application guidance. Decoupling, grounding, and microphone-bias layout remain critical because they directly influence noise, distortion, and voice intelligibility. This product data combines the confirmed electrical characteristics, package information, interface functions, application fit, and design considerations needed to evaluate the SI3000-C-GS for a voice-band audio signal chain.

RFQ پەیوەندی
SI3000-C-GSR - 16-Bit Voice-Band Audio Codec | Skyworks (Tape & Reel)
SI3000-C-GSR

SI3000-C-GSR - 16-Bit Voice-Band Audio Codec | Skyworks (Tape & Reel)

The Skyworks Solutions Inc. SI3000-C-GSR is a 16-bit voice-band audio codec with 84 dB ADC dynamic range, 84 dB DAC dynamic range, and 4–12 kHz sample rates in a 16-SOIC package. It integrates a 30 dB microphone preamplifier, programmable input and output gain or attenuation, microphone bias, handset hybrid circuitry, and output drive for 32 Ω headphones. A voice-band codec is a specialized audio interface that converts analog microphone or line-level signals into a digital serial stream and converts digital audio back into an analog output. Within the hierarchy of audio codecs, line codecs, audio interface ICs, and interface semiconductors, it concentrates several telephone and modem signal-chain functions into one device. Its narrowband sampling range is intended for speech rather than hi-fi music. The SI3000-C-GSR provides one ADC and one DAC, both using 16-bit resolution. Programmable input and output gain or attenuation gives the system designer control over signal levels, while the 30 dB microphone preamplifier supports direct microphone conditioning. The integrated bias circuit reduces external microphone-support requirements, and the headset driver is specified for 32 Ω loads. Integration is a central advantage because the codec combines the analog voice interface, conversion functions, and telephone-support circuitry. According to the manufacturer datasheet, the device can connect directly with Si3034, Si3035, Si3044, and Si3056 data-access arrangements and chipsets. These interfaces support voice-band modem and telephone equipment where board area and component count are important constraints. Typical applications include voice-band modems, telephone interface boards, handsets, speakerphones, voicemail equipment, and data-access adapters. The 16-SOIC package also makes the SI3000-C-GSR suitable for designs that require conventional surface-mount assembly rather than a high-density land grid array. When designing around this codec, verify the required analog supply, digital interface voltage, sampling clock, and serial device configuration against the manufacturer pin descriptions and application guidance. Decoupling, grounding, and microphone-bias layout remain critical because they directly influence noise, distortion, and voice intelligibility. This product data combines the confirmed electrical characteristics, package information, interface functions, application fit, and design considerations needed to evaluate the SI3000-C-GSR for a voice-band audio signal chain.

RFQ پەیوەندی
SI3000-KS - 16-Bit Voice Codec | Skyworks Solutions
SI3000-KS

SI3000-KS - 16-Bit Voice Codec | Skyworks Solutions

Skyworks Solutions SI3000-KS is a 16-bit voice-band interface codec with one ADC channel and one DAC channel, supporting sample rates from 4 kHz to 12 kHz in a 16-pin SOIC package. The verified listing identifies 84 dB ADC dynamic range, 84 dB DAC dynamic range, a 30 dB microphone preamplifier, programmable input gain or attenuation, and programmable output gain or attenuation. It is intended for voice-band audio systems requiring integrated conversion and microphone or speaker drive functions. The distributor data also identifies the SI3000-KS as a leaded interface codec and reports that Skyworks recommends the Si3000-C-FS datasheet for current design work. This means lifecycle status should be confirmed before new production commitments, although the SI3000-KS remains listed by distributors. A voice-band codec is an audio interface integrated circuit that converts analog microphone or line-level signals into digital PCM data and converts digital audio back into an analog output. In the broader device hierarchy, the SI3000-KS belongs to audio codecs, interface ICs, signal-conversion devices, and semiconductor components. Its one-ADC and one-DAC architecture is suitable for compact telephony, communications, embedded voice, and audio-assistance designs where a dedicated low-bandwidth audio path is required. The 4 kHz to 12 kHz sample-rate range targets narrow voice bandwidth rather than full-spectrum hi-fi audio. The main engineering benefits are the stated 84 dB conversion dynamic range, integrated microphone and speaker-drive support, and programmable analog gain controls. Input gain or attenuation helps match microphone levels to the converter, while output gain or attenuation helps condition the playback signal before the speaker amplifier. The 30 dB microphone preamplifier provides additional headroom for weak microphone sources. Because the verified data does not provide supply voltage, clock requirements, control-interface details, absolute maximum ratings, or thermal data, those values must be obtained from the manufacturer datasheet before final schematic or PCB approval. Use the SI3000-KS when the design specifically needs a narrowband voice codec with integrated ADC, DAC, microphone preamplification, and programmable gain. Suitable application directions include telephone handsets, intercom systems, industrial voice terminals, automotive voice interfaces, and embedded communication modules. The automotive positioning appears in distributor descriptions, but qualification status and exact environmental requirements are not independently established by the supplied data and therefore remain unknown. A design must also verify that the required sample rate, serial interface, audio levels, power rails, and external components match the device datasheet. The principal design consideration is lifecycle risk. Mouser states “Leaded - Not recommended for new designs, see Si3000-C-FS datasheet,” while DigiKey lists SI3000-KS for purchase. Engineers should therefore treat the SI3000-KS as a potentially legacy or transition-related device and compare it with the recommended current family before committing a new design. The exact pinout is not reproduced in the supplied verified snippets, so pin-level wiring must be confirmed from the official manufacturer datasheet. This page combines the verified distributor classification and specifications with procurement context and design guidance without inventing missing electrical parameters. This page synthesizes distributor listings, lifecycle notices, codec specifications, replacement guidance, and practical application considerations. It distinguishes verified facts from unavailable parameters, highlights the Skyworks recommendation concerning Si3000-C-FS, and avoids treating a distributor availability statement as proof of long-term design support.

RFQ پەیوەندی
SI3008-B-FS - 2.4kbps ISOmodem | Skyworks | 8-SOIC-EP
SI3008-B-FS

SI3008-B-FS - 2.4kbps ISOmodem | Skyworks | 8-SOIC-EP

The Skyworks Solutions, Inc. SI3008-B-FS is a highly integrated ISOmodem interface IC for telephone-line data communication, supporting a maximum data rate of 2.4 kbps in an 8-pin SOIC exposed-pad package. The supported modem formats include V.22bis at 2400 bps, V.22 and V.23 at 1200 bps, and V.21 and Bell 103 at 300 bps, with additional compatibility identified for V.32, V.34, V.90, and Bell 212A. An ISOmodem is a modem interface integrated with telephone-line isolation and data-access arrangements. It belongs to the modem interface IC and telecom interface IC hierarchy before connecting to broader communications equipment. This category combines modulation, line-interface, isolation, signaling, and telephone-network functions in a single IC, reducing the number of discrete components required in a line-side communication design. The SI3008-B-FS includes a low-cost data access arrangement, parallel phone detection, fast connect, V.23 reversing, and additional security protocols. Its capacitive isolation is rated above 6000 V. These features make the device relevant to legacy data communications, alarm and monitoring systems, point-of-sale equipment, industrial terminals, and telephone-line interfaces that require network-side modem behavior rather than a modern broadband transceiver. The device operates as a 2.4 kbps modem with support for several ITU V-series and Bell protocols. At the 2.4 kbps operating point, the SI3008-B-FS uses V.22bis, while 1200 bps operation uses V.22 or V.23 and 300 bps operation uses V.21 or Bell 103. Compatibility with V.32, V.34, V.90, and Bell 212A extends the protocol range stated for the component. Exact operating limits, clock requirements, interface timing, and electrical characteristics should be taken from the manufacturer datasheet. Typical uses include legacy telephone-line data links, security and alarm-control equipment, remote terminals, and embedded modems requiring fast connection or parallel phone detection. The integrated isolation architecture helps separate line-side circuitry from the host system. The exposed pad provides a thermal and ground-connection surface, although its electrical net and landing-pattern requirements must follow the manufacturer pinout and layout guidance. Designers should treat the SI3008-B-FS as a protocol-specific legacy modem rather than a general-purpose serial interface. The host processor must support the selected V-series or Bell signaling sequence, and the telephone-line network must be compatible with the selected country or regional approval. Input and output protection requirements depend on the line interface and regulatory environment, so the datasheet’s approved application circuits should guide component selection. This product page combines the documented protocol capabilities, package information, regulatory statements, and cross-reference findings into an engineering-focused selection guide. It also distinguishes verified device attributes from specifications that still require confirmation from the manufacturer datasheet, helping designers evaluate the SI3008-B-FS without treating unspecified electrical values as guaranteed.

RFQ پەیوەندی
SI3008-B-FSR - 2.4kbps ISOmodem | Skyworks | 8-SOIC-EP (Tape & Reel)
SI3008-B-FSR

SI3008-B-FSR - 2.4kbps ISOmodem | Skyworks | 8-SOIC-EP (Tape & Reel)

The Skyworks Solutions, Inc. SI3008-B-FSR is a highly integrated ISOmodem interface IC for telephone-line data communication, supporting a maximum data rate of 2.4 kbps in an 8-pin SOIC exposed-pad package. The supported modem formats include V.22bis at 2400 bps, V.22 and V.23 at 1200 bps, and V.21 and Bell 103 at 300 bps, with additional compatibility identified for V.32, V.34, V.90, and Bell 212A. An ISOmodem is a modem interface integrated with telephone-line isolation and data-access arrangements. It belongs to the modem interface IC and telecom interface IC hierarchy before connecting to broader communications equipment. This category combines modulation, line-interface, isolation, signaling, and telephone-network functions in a single IC, reducing the number of discrete components required in a line-side communication design. The SI3008-B-FSR includes a low-cost data access arrangement, parallel phone detection, fast connect, V.23 reversing, and additional security protocols. Its capacitive isolation is rated above 6000 V. These features make the device relevant to legacy data communications, alarm and monitoring systems, point-of-sale equipment, industrial terminals, and telephone-line interfaces that require network-side modem behavior rather than a modern broadband transceiver. The device operates as a 2.4 kbps modem with support for several ITU V-series and Bell protocols. At the 2.4 kbps operating point, the SI3008-B-FSR uses V.22bis, while 1200 bps operation uses V.22 or V.23 and 300 bps operation uses V.21 or Bell 103. Compatibility with V.32, V.34, V.90, and Bell 212A extends the protocol range stated for the component. Exact operating limits, clock requirements, interface timing, and electrical characteristics should be taken from the manufacturer datasheet. Typical uses include legacy telephone-line data links, security and alarm-control equipment, remote terminals, and embedded modems requiring fast connection or parallel phone detection. The integrated isolation architecture helps separate line-side circuitry from the host system. The exposed pad provides a thermal and ground-connection surface, although its electrical net and landing-pattern requirements must follow the manufacturer pinout and layout guidance. Designers should treat the SI3008-B-FSR as a protocol-specific legacy modem rather than a general-purpose serial interface. The host processor must support the selected V-series or Bell signaling sequence, and the telephone-line network must be compatible with the selected country or regional approval. Input and output protection requirements depend on the line interface and regulatory environment, so the datasheet’s approved application circuits should guide component selection. This product page combines the documented protocol capabilities, package information, regulatory statements, and cross-reference findings into an engineering-focused selection guide. It also distinguishes verified device attributes from specifications that still require confirmation from the manufacturer datasheet, helping designers evaluate the SI3008-B-FSR without treating unspecified electrical values as guaranteed.

RFQ پەیوەندی
SI3010-F-FS 2.4 kbps Line-Side DAA | Skyworks
SI3010-F-FS

SI3010-F-FS 2.4 kbps Line-Side DAA | Skyworks

Skyworks Solutions SI3010-F-FS is a direct access arrangement interface IC designed as the line-side DAA for the Si2404 ISOmodem platform. It supports 2400 bps data operation with a 3 V supply and is associated with a 16-pin SOIC package in distributor and cross-reference listings. The SI3010-F-FS is intended for telephone-line interface designs that require a dedicated DAA alongside the modem DSP and line-driver circuitry. A direct access arrangement, or DAA, is the telephone-network-facing interface that isolates the modem electronics from the analog telephone line. In a complete ISOmodem design, the DAA handles line-side signaling and protection while the companion modem IC performs data modulation and demodulation. This division allows a compact, globally programmable telephone-line interface to be paired with the appropriate Silicon Labs modem family member. The documented SI3010 feature set covers modem formats including ITU-T and Bell rates from 300 bps through 56 kbps, V.21, V.22, V.29, Fast Connect, V.44, V.42, V.42bis, and MNP2-5. It also supports automatic rate negotiation and Type I and Type II caller-ID decoding. These capabilities apply to the shared Si2457, Si2454, Si2415, and Si2404 ISOmodem documentation identified for the component. The SI3010 is built for 3 V operation and is listed with a 0 °C to 70 °C commercial temperature range. It belongs to the telecom-interface IC category and uses surface-mount SOIC construction, allowing conventional reflow assembly and automated inspection. Because a DAA is connected directly to an analog telephone line, its surrounding protection, isolation, filtering, and ring-detection circuitry are as important as the IC itself. Typical implementations include Si2404-based voice and data modems, embedded fax or data systems, caller-ID equipment, and industrial telephone-line interfaces. The Si2457, Si2454, Si2415, and Si2401 devices provide practical companion choices when a complete two-chip ISOmodem system is required rather than the DAA alone. Designers should preserve the separation between telephone-line and logic domains, validate the external protection network, and confirm the companion modem’s recommended hook-state, ring-detection, and line-driver circuitry. The manufacturer datasheet should be used for the exact pin assignments, absolute maximum ratings, timing, and reference circuit because the line-side interface is sensitive to component values and printed-circuit-board layout. This page combines the verified MPN, package and interface information with drop-in comparison guidance, design notes, application fit, and practical sourcing questions. It is intended to help engineers identify the correct line-side DAA and plan a robust ISOmodem-based telephone interface.

RFQ پەیوەندی
SI3010-F-GS - 16-SOIC Telecom DAA Interface IC | Skyworks
SI3010-F-GS

SI3010-F-GS - 16-SOIC Telecom DAA Interface IC | Skyworks

Skyworks Solutions SI3010-F-GS is a telecom interface integrated circuit identified as a line-side Direct Access Arrangement (DAA) for Si2401/Si2404 ISOmodem designs. The device is packaged in a 16-SOIC surface-mount package measuring 0.154 inches, or 3.90 mm, in body width. It is intended for line-side telephone-interface applications requiring a direct-access-arrangement function within telecom equipment. A Direct Access Arrangement is a telecom interface function that provides the physical line-side interface between a customer premises telephone network and a modem or embedded communications system. In the broader electronics hierarchy, a DAA belongs to the line-interface IC family, the interface-IC category, and ultimately the semiconductor and communications-equipment ecosystem. The SI3010 series is associated with Silicon Labs' Si2401 and Si2404 ISOmodem families and is intended for designs requiring a dedicated line-side interface companion IC. The SI3010-F-GS is identified as a 16-SOIC surface-mount part. Operating-temperature information is listed as 0°C to 70°C for one catalog representation, while the manufacturer identity is shown as Silicon Labs in some records and Skyworks Solutions, Inc. in current distributor records. The GS suffix is associated with a lead-free packaging designation in the available catalog descriptions. The -F family is specifically described as the line-side DAA for the Si2404 ISOmodem. The device is suitable for embedded voice and data terminal designs, digital subscriber line equipment, industrial telephone interfaces, and legacy telecom equipment requiring a dedicated DAA function. Because the SI3010 is a line-side interface rather than a general-purpose logic IC, its external implementation must follow the manufacturer's recommended DAA circuit, including the specified protection, isolation, and line-interface components. The principal design consideration is footprint continuity. The SI3010-F-GS uses a 16-SOIC outline, so any replacement must preserve the same lead arrangement and electrical function. Pin assignments, absolute maximum ratings, hook-state timing, line impedance, and recommended external components should be checked against the manufacturer datasheet before schematic capture or PCB release. The SI3010-F-GS is listed in telecom-interface catalogs with inventory and ordering information. Its package, series, and interface function make it especially relevant to maintenance, redesign, and legacy-ISOmodem projects. For a new design, confirm current lifecycle status and obtain the authoritative datasheet before committing the component to a production BOM. This product summary consolidates the catalogued line-side DAA function, 16-SOIC package, associated Si2404 ISOmodem application, and traceable manufacturer and distributor references into an engineer-oriented resource. It also distinguishes the DAA function from general-purpose interface ICs and highlights the package and lifecycle checks that matter when replacing the part in telecom hardware.

RFQ پەیوەندی