Interface ICs
ژێرپۆلەکان
بەرهەمەکان (5,100+)
TUSB544RNQR 8.1-Gbps 4-Channel USB-C Redriver | Texas Instruments
The Texas Instruments TUSB544RNQR is a four-channel USB Type-C linear redriver supporting data rates up to 8.1 Gbps in a 40-pin WQFN package measuring 6 x 4 mm. It operates from a single 3.3 V supply, provides multiple levels of receive linear equalization for channels affected by cable and PCB-trace loss, and includes input equalization and output de-emphasis functions. A linear redriver is a signal-conditioning semiconductor placed between a transmitter and receiver. It receives a degraded high-speed differential signal, compensates for channel loss, and retransmits a cleaner waveform to the next device. The TUSB544 operates at the physical layer and is protocol agnostic, allowing it to support USB Type-C Alternate Mode interfaces such as VESA DisplayPort without decoding the transmitted protocol. The principal characteristics of the TUSB544RNQR are its four independently conditioned channels, 8.1-Gbps maximum data rate, 3.3 V supply operation, and selectable receive equalization. These features make it suitable for systems where connector launches, cable loss, PCB routing, or long trace segments reduce the margin of a USB Type-C high-speed link. Its stated 10.0 ns delay supports repeatable channel timing in multi-lane links. The device uses linear rather than digital retiming to recover signal margin. Linear equalization boosts the high-frequency content of the incoming signal, while output de-emphasis reduces the effective amplitude difference between running and alternating data patterns. This approach can preserve protocol flexibility, although the system designer must still verify eye opening, jitter, crosstalk, and electromagnetic-emissions behavior in the completed channel. Typical applications include USB Type-C docking stations, dual-screen workstations, external storage enclosures, laptops, tablets, and DisplayPort-over-USB-C adapters. The TUSB544 is especially useful where a USB-C receptacle is separated from the host controller by a connector launch, cable, adapter, or relatively long PCB channel. It can also be evaluated in reversible-port implementations because the redriver operates on the differential data lanes rather than interpreting logical USB traffic. A successful implementation requires careful high-speed PCB layout and validation of the complete channel. Place the redriver close to the connector or loss source, provide a continuous reference plane, route differential pairs with matched impedance, and verify the selected equalization and de-emphasis settings against eye-diagram measurements. Power and ground connections should be short and decoupled close to the device pins. This page organizes the key electrical characteristics, application guidance, pin-assignment limitations, and verified source links for engineers evaluating the TUSB544RNQR. It also distinguishes confirmed device attributes from parameters that require confirmation from the manufacturer datasheet before layout release.
TUSB551RWBR - 5Gbps USB 3.0 Redriver | Texas Instruments
The Texas Instruments TUSB551RWBR is a single-channel USB 3.0 SuperSpeed redriver with a 1.8 V supply, 5 Gbps signal rate, and 12-X2QFN package measuring 1.6 mm by 1.6 mm. It is designed to restore signal integrity across PCB traces, cables, connectors, and other interconnect structures that introduce attenuation or reflections. A USB redriver is a signal-conditioning IC placed between a USB transmitter and receiver. It detects low-amplitude or degraded high-speed data, regenerates the signal, applies equalization, and transmits a cleaner waveform to the next device. The TUSB551RWBR belongs to the interface IC hierarchy, where USB redrivers support the physical layer of USB 3.0 systems. Key features include one-channel SuperSpeed signal conditioning, operation from a 1.8 V supply, support for data rates through 5 Gbps, equalization, low power consumption, and automatic LFPS de-emphasis. Automatic LFPS de-emphasis helps the device support low-power states used during USB link training and device initialization. The fourth-generation redriver architecture also emphasizes output-drive performance for loss-limited USB links. The device can compensate for channel loss encountered in system interconnects. Equalization increases the voltage margin available to the receiving endpoint, while regenerated edges reduce the timing uncertainty associated with a degraded differential signal. As a single-channel device, it is intended for point-to-point SuperSpeed links rather than multi-lane hub or switch architectures. Typical uses include USB 3.0 Type-C host and peripheral connections, docking systems, external storage, monitors, test equipment, and embedded USB controllers. It is also useful when a board-to-board or cable path causes the receiver to encounter attenuation, ringing, or an eye-margin problem. Placement close to the transmitter can be preferable when that endpoint already suffers from package or board losses. The primary design trade-off is signal improvement versus added board area and power. Place the redriver where channel loss is concentrated, provide a continuous reference plane beneath the high-speed pair, and route the differential traces as a controlled-impedance structure. Verify the complete channel with compliance testing rather than relying only on eye-waveform appearance. This product page combines the manufacturer’s device description with package, interface, temperature, sourcing, and replacement guidance. It also identifies the practical checks needed to distinguish a true same-package substitute from a device that merely supports USB 3.0 or offers similar data-rate capability.
TUSB6015IZQE - USB 2.0 HS OTG Controller | Texas Instruments
Texas Instruments TUSB6015IZQE is a USB 2.0 high-speed On-The-Go dual-role controller with a 1.5 V core supply, 80-pin BGA MICROSTAR JUNIOR package, and an industrial operating-temperature range of -40°C to +85°C. The controller supports peripheral, embedded-host, and OTG-device operating roles within one integrated USB interface device. A USB OTG dual-role controller is an interface IC that combines device and host functions within a USB 2.0 system. The TUSB6015IZQE can participate as a USB high-speed peripheral, a USB high-speed embedded host, or an OTG device. This role flexibility makes the device useful in portable equipment, storage accessories, test systems, and embedded USB products that need to negotiate host or device behavior through firmware. The principal specifications are USB 2.0 high-speed operation, a 1.5 V supply, support for 1.5 V, 1.8 V, and 3.3 V interface signaling, an 80-BGA MICROSTAR JUNIOR package measuring 5 mm by 5 mm, and an operating-temperature range of -40°C to +85°C. The 80-pin surface-mount construction supports dense PCB layouts while providing separate connections required by a multifunction USB controller. The TUSB6015IZQE combines high-speed USB peripheral logic, embedded-host control, and OTG device behavior in a single controller. Its dual-role architecture reduces the need for separate USB host and device controllers in compact products. Firmware can select the required operating role, while the integrated interface circuitry manages communication between the USB bus and the host-side logic. Typical uses include USB storage bridges, portable media equipment, multifunction peripherals, industrial data-acquisition equipment, and embedded systems that must support both host and peripheral connections. The small 5 mm by 5 mm BGA footprint is especially useful where connector placement, enclosure size, and routing density limit the available board area. Layout is the primary implementation concern for this device. Place the USB differential pair as a controlled-impedance route, minimize stub lengths, and place required bypass capacitors close to their power pins. Because the package uses an 80-ball BGA, inspection and assembly processes must support fine-pitch BGA soldering, and the PCB must provide adequate thermal and power-delivery paths. This page consolidates the manufacturer specification, package information, sourcing workflow, interface role descriptions, and practical implementation guidance for engineers evaluating the TUSB6015IZQE in USB 2.0 HS OTG designs.
TUSB6020PFC - USB 2.0 OTG Dual-Role Controller | Texas Instruments
The Texas Instruments TUSB6020PFC is a USB 2.0 high-speed On-The-Go dual-role controller with a VLYNQ serial-interface bridge, supporting USB low-speed at 1.5 Mb/s, full-speed at 12 Mb/s, and high-speed at 480 Mb/s in an 80-pin TQFP package measuring 12 mm by 12 mm. A USB interface controller is an interface IC that coordinates transactions between a USB host or peripheral and an embedded system. The TUSB6020 belongs to the hierarchy of USB controllers, interface controllers, integrated interface ICs, and semiconductors. Its dual-role architecture supports a USB 2.0 OTG device while providing a local bus bridge to a VLYNQ-compatible device. The integrated USB 2.0 PHY supports all three standard USB signaling rates, eliminating the need for a separate external USB transceiver in the intended application. The parallel interface and OTG role support make the device useful in portable synchronization, data acquisition, docking, and embedded data-transfer systems where USB connectivity must coexist with a dedicated local serial link. TUSB6020PFC operates from a 3.3 V supply and is offered in an 80-TQFP package with a 12 mm by 12 mm body. The package exposes a substantial parallel and control interface rather than relying on a compact USB-C or USB 3 connector, making board layout and signal-integrity implementation the main engineering considerations. Verify the complete pin-description table and recommended external circuitry in the manufacturer datasheet before finalizing a PCB. Typical applications include USB-to-VLYNQ local-bus bridges, portable test and measurement equipment, industrial data-acquisition systems, synchronization products, and embedded systems that need high-speed OTG transfer with device-role support. The controller is particularly relevant where the host processor requires a separate local-bus path while the product also connects to a USB 2.0 host. Design around the manufacturer's recommended USB transceiver network, impedance-controlled differential routing, supply decoupling, and VLYNQ interface layout. Keep high-speed USB traces short, provide a continuous ground reference, follow the datasheet's differential impedance guidance, and reserve test access for enumeration, suspend, and resume troubleshooting. This product page combines the controller's USB rates, OTG role, package details, interface use cases, drop-in ordering variants, and practical PCB guidance into an engineering-focused selection reference for USB 2.0 dual-role designs.
TUSB6020PFCR - USB 2.0 HS OTG Controller | Texas Instruments
Texas Instruments TUSB6020PFCR is a USB 2.0 high-speed on-the-go dual-role controller with a 1.5 V, 1.8 V, and 3.3 V supply range, supplied in an 80-pin TQFP package measuring 12 mm by 12 mm. The device provides a parallel interface to a VLYNQ serial interface, supporting USB host and USB device roles in one controller. A USB 2.0 high-speed on-the-go controller is an interface IC that coordinates communications between a USB host or peripheral and another serial bus. The TUSB6020 bridges USB 2.0 high-speed traffic to the VLYNQ interface, allowing equipment designers to add dual-role USB connectivity without implementing the complete USB protocol stack in external logic. Its place in the hierarchy is interface controller, USB interface IC, interface integrated circuit, and semiconductor. The TUSB6020 supports three listed supply voltages: 1.5 V, 1.8 V, and 3.3 V. Its operating temperature range is 0 °C to 70 °C, and the commercial-temperature grade is suitable for industrial-room-temperature equipment. The controller uses a gull-wing terminal arrangement in a square 80-terminal TQFP package, providing a high pin count for USB data, control, power, clock, and VLYNQ interface connections. Technical operation centers on the USB 2.0 high-speed interface, OTG dual-role control, and the parallel-to-VLYNQ local bus bridge. A 78.1 mA supply-current figure is listed for the device. Unlike a simple USB transceiver, this component is a protocol-oriented controller designed to manage host and device functions and transfer data through the VLYNQ interface. Typical uses include USB-to-VLYNQ storage peripherals, multifunction printers, set-top equipment, industrial data acquisition systems, and embedded USB bridges. The dual-role architecture is especially useful when a product must connect to both a USB host and an external USB peripheral while presenting a VLYNQ interface to its internal processing logic. The principal design consideration is PCB implementation. Because this is an 80-terminal TQFP device with numerous high-speed USB signals, use the manufacturer pin description and layout guidance to assign every terminal. Keep USB traces short, provide a continuous ground reference, and follow the required decoupling and signal-routing practices to preserve USB 2.0 high-speed signal integrity. This product page combines the manufacturer-device description with practical application guidance, package details, interface comparisons, sourcing information, and verified drop-in candidates. It is intended to help engineers determine whether the TUSB6020PFCR fits a USB 2.0 OTG-to-VLYNQ design before beginning board layout.
TUSB6020ZQE - USB 2.0 OTG Controller | Texas Instruments
Texas Instruments TUSB6020ZQE is a USB 2.0 high-speed on-the-go dual-role controller with a parallel interface, packaged in an 80-ball BGA MICROSTAR JUNIOR package measuring 5 x 5 mm. It supports USB 2.0 full-speed and high-speed operation and is designed to provide a seamless interface to the VLYNQ serial interface. The device also includes 1.5 V and 1.8 V supply domains identified in the manufacturer datasheet. A USB controller is an interface integrated circuit that coordinates transactions between a USB host or peripheral and an embedded system. Within the broader hierarchy of interface ICs, USB controllers connect digital peripherals to a standardized bus, while dual-role controllers can support host, device, or on-the-go operating roles. The TUSB6020ZQE places USB connectivity and VLYNQ bridging functions in a compact surface-mount package suitable for space-constrained embedded equipment. The TUSB6020ZQE supports USB 2.0 high-speed operation, including the 480 Mb/s signaling mode defined by the USB 2.0 specification. Its on-the-go dual-role architecture allows a system to negotiate the appropriate host or peripheral function when both roles are possible. The parallel interface provides a deterministic connection to compatible embedded logic, while the VLYNQ interface supports communication with compatible serial-side devices. The 80-ball BGA MICROSTAR JUNIOR package supports dense PCB layouts while exposing power, ground, USB, parallel-interface, and VLYNQ connections through a ball-grid footprint. Manufacturer documentation identifies 1.5 V core-related rails and a 1.8 V rail in the power-domain naming. Because all balls carry dense signal assignments, PCB layout should follow the manufacturer footprint, escape-routing guidance, and recommended via and plane configurations without altering the land pattern. Typical uses include USB-to-VLYNQ interface bridges, embedded test and measurement systems, industrial data-acquisition equipment, portable diagnostic controllers, and compact industrial or medical equipment requiring high-speed USB connectivity. Selection should account for the required USB role, parallel-bus timing, VLYNQ implementation, voltage rails, board area, and the exact 80-ball footprint. A key implementation consideration is that the package is a large-ball-count BGA intended for controlled manufacturing processes. Inspect assembled joints for voiding, bridging, and solder-ball defects, and verify that the PCB stackup and assembly process support the package geometry. The USB differential pair also needs a controlled layout to preserve signal integrity at high-speed data rates. This page consolidates the identified package, interface, voltage-domain, and sourcing information with same-footprint replacement analysis and practical PCB guidance. It highlights what must be checked before substituting a controller: the 80-ball footprint, USB role behavior, interface pinout, supply requirements, and application-specific timing. The TUSB6020ZQE is a compact USB interface controller for systems that combine USB 2.0 connectivity with a parallel-to-VLYNQ interface path. Its 5 x 5 mm 80-ball BGA construction makes it especially relevant to dense industrial, test, communications, and embedded-control designs where connector space is limited.
TUSB6020ZQER - USB 2.0 OTG Controller | Texas Instruments
The Texas Instruments TUSB6020ZQER is a USB 2.0 dual-role controller with an OTG-capable parallel interface, supplied in an 80-ball, 5 x 5 mm VFBGA package with a 0.5 mm ball pitch. It supports 1.5 V, 1.8 V, and 3.3 V supply rails and is designed for embedded USB host, device, and dual-role applications requiring direct parallel-interface integration with an applications processor or system controller. A USB interface controller is an interface IC within the broader semiconductor hierarchy. It coordinates USB traffic between a host processor and external USB devices or ports. Unlike a general-purpose microcontroller, the TUSB6020ZQER concentrates on protocol handling, USB 2.0 connectivity, and host or device interface management, allowing the attached processor to concentrate on application-specific tasks. The device's principal features include USB 2.0 operation, On-The-Go functionality, and a parallel interface. Its 80-terminal VFBGA construction supports compact systems where connector space and board area are constrained. Separate 1.5 V, 1.8 V, and 3.3 V rail names appearing in the device documentation indicate that the implementation must account for multiple interface voltage domains rather than treating the controller as a single-rail component. The TUSB6020ZQER belongs to the same TI TUSB6020 family as the TUSB6020ZQE, TUSB6020PFC, and TUSB6020PFCR device identifiers. Its commercial temperature grade and dense ball-array package make it appropriate for compact industrial, communications, and embedded-computing equipment. Detailed operating limits, clock requirements, transceiver characteristics, and exact ball assignments should be taken from the manufacturer datasheet before final schematic and layout release. Typical uses include USB-to-serial bridge products, industrial data-acquisition equipment, portable data terminals, and embedded systems that need USB host or dual-role behavior. The parallel interface can provide a deterministic processor-facing bus when an external USB transceiver is used. Designers should also consider the controller's exact USB role, external transceiver arrangement, and required low-speed, full-speed, or high-speed support when selecting the device. PCB implementation requires careful high-speed signal integrity planning. Ball-array escape routing should remain short and symmetrical, power and ground planes should be continuous, and the manufacturer's recommended decoupling and layout guidance should be followed. Because the 5 x 5 mm package uses a 0.5 mm pitch, assembly capability, via-in-pad design, and thermal-via strategy must be reviewed during board planning. This page consolidates the verified package, interface, voltage, and temperature information for TUSB6020ZQER with application guidance, sourcing directions, and an explicit review of drop-in alternatives. Exact electrical limits and the complete 80-ball assignment should always be confirmed against the manufacturer documentation for the specific device variant.
TUSB6250PFC - USB 2.0 ATA/ATAPI Bridge | Texas Instruments
Texas Instruments TUSB6250PFC is a USB 2.0 low-power, high-speed ATA/ATAPI bridge controller packaged in an 80-pin TQFP (PFC) measuring 12 x 12 mm. It provides 3 V to 3.6 V operation, 80 integrated pins, and a 0 °C to 70 °C commercial temperature range for compatible USB-to-ATA storage interface designs. A USB-to-ATA/ATAPI bridge controller is an interface IC that translates USB host transactions into ATA commands understood by compatible storage devices. This controller family belongs to the broader USB interface-controller and storage-interface hierarchy, allowing equipment without a native ATA interface to communicate with legacy-compatible disk or optical-storage subsystems through USB 2.0. The TUSB6250PFC is identified specifically as a low-power, high-speed USB 2.0 to ATA/ATAPI bridge solution. Its operating range of 3 V to 3.6 V supports integration with 3.3 V equipment, while the high-speed interface positioning makes it suitable for storage-oriented USB ports requiring greater throughput than a low-speed USB peripheral. The 80-pin TQFP (PFC) package provides a substantial number of interface, power, control, and ground connections. The architecture separates USB-side signaling from ATA/ATAPI-side signaling so that a USB host can communicate through a standardized external interface while the bridge manages command translation and device-side control. This division of responsibilities permits reuse in USB storage appliances, legacy disk subsystems, and backup or archival equipment that originally relied on an ATA interface. USB bus powering and suspend behavior also make power management an important part of the implementation. Typical applications include USB-connected storage appliances, external disk interfaces, network-attached storage controller boards, digital video recorders, backup appliances, and industrial data-acquisition systems with compatible legacy storage. Designers should confirm device support, USB enumeration behavior, power requirements, and signal compatibility before integrating the controller into a new system. The primary design task is matching the TUSB6250PFC pin configuration, voltage rails, interface timing, and PCB land pattern exactly to the selected storage architecture. Keep USB and ATA/ATAPI traces routed according to the manufacturer layout guidance, provide the required bypass capacitors, and maintain solid ground-plane continuity to reduce data-integrity and emissions risks. This product page combines the manufacturer interface definition, package and temperature details, drop-in replacement availability, comparison data, and practical PCB guidance. It helps engineers evaluate the TUSB6250PFC as a USB 2.0 ATA/ATAPI bridge while highlighting the electrical and footprint checks required for a successful design.
TUSB7320RKMR - USB 3.0 2-Port xHCI Host Controller | Texas Instruments
The Texas Instruments TUSB7320RKMR is a SuperSpeed USB 3.0 2-port xHCI (eXtensible Host Controller Interface) host controller that bridges a PCI Express upstream port to two USB 3.0 downstream ports, housed in a 100-pin WQFN-MR (RKM) package measuring 9x9 mm with an exposed thermal pad. The device integrates an xHCI 1.0 compliant controller core, supports USB 3.0 (5 Gbps), USB 2.0 (480 Mbps), and USB 1.1 (12/1.5 Mbps) through dual mode ports, and provides USB Battery Charging 1.2 support including CDP/DCP modes for downstream charging. A USB 3.0 xHCI host controller is a specialized protocol bridge that lets a host processor running an xHCI-class driver enumerate and manage downstream USB devices at SuperSpeed, High-Speed, Full-Speed, and Low-Speed. Within the broader hierarchy it sits as an interface IC between the PCI Express fabric and the USB device tree, enabling motherboards, docking stations, and embedded platforms to add or expand USB ports without redesigning the core chipset. The TUSB7320 family is positioned above PCIe-to-USB 2.0 controllers and below root-complex integrated host silicon that bundles USB directly into the SoC. Key features include two USB 3.0 downstream ports operating at 5 Gbps SuperSpeed plus backward compatibility with legacy USB rates, one PCI Express Gen 2 upstream port (x1 lane) running at 5 Gbps, integrated 5V to 3.3V/1.8V/1.2V/0.9V core voltage regulators, and per-port power switching controls. The device supports USB attach/detach protocol, overcurrent detection, and dual-role flexibility via ID-pin and OTG signaling on the upstream port. Architecturally, the TUSB7320 uses a SerDes-based PHY pair per downstream port for SuperSpeed signaling, a hardened xHCI controller engine for transaction translation, and a PCIe physical layer. The internal regulator block removes the need for most external power rails, simplifying board layout. Reference designs in the TUSB73x0 datasheet family describe PCIe edge connector pinout, USB connector wiring, and recommended decoupling for the internal LDO bank. Typical applications include PC motherboards, notebook docking stations, industrial PCs, point-of-sale terminals, USB port replicators, and embedded platforms that need two USB 3.0 downstream ports from a standard PCIe x1 slot. The device is also found in test fixtures and breakout boards that expose USB 3.0 traffic for analyzer capture. When using the TUSB7320RKMR, allocate thermal relief on the exposed pad (EP) and observe the 100 us PCIe reference-clock stable period before deasserting PERST to ensure proper link training. Designers should also follow the inrush current profile on VBUS when enabling ports that may already have devices attached. This page synthesizes distributor pricing, drop-in alternatives from the TUSB73x0 family and cross-vendor host controllers, and practical design notes not found in the manufacturer datasheet.
TUSB7320RKMR - USB 3.0 xHCI 2-Port Host Controller | Texas Instruments
The Texas Instruments TUSB7320RKMR is a SuperSpeed USB 3.0 two-port xHCI host controller with a PCIe x1 Gen 2 upstream interface, packaged in a 100-pin WQFN-MR (RKM) 9x9 mm footprint. The device delivers two downstream USB 3.0 ports supporting SuperSpeed (5 Gbps), high-speed, full-speed, and low-speed USB traffic, and operates from 1.1 V and 3.3 V supplies. It is qualified for the commercial 0 °C to 70 °C range in a green/RoHS-compliant plastic WQFN-100 housing. Per TI product information, the TUSB7320 and its four-port sibling TUSB7340 share the same pin-compatible 100-pin RKM package, allowing board reuse across port-count variants. An xHCI (eXtensible Host Controller Interface) host controller is the silicon that sits between a root-complex PCIe link and the physical USB ports on a system. The xHCI class driver in the OS enumerates USB 3.0/2.0/1.1 devices without requiring companion controllers, so a single TUSB7320 turns a PCIe-capable SoC or add-in card into a fully featured USB root hub. It belongs to the broader hierarchy of bus controllers -> interface ICs -> USB controllers -> SuperSpeed xHCI controllers -> mixed-signal semiconductors. Key features include hardware-automated USB attached SCSI protocol (UASP), PCI Express x1 Gen 2 connectivity, integrated 5 Gbps PHY, per-port battery charging support, and integrated power switching/overcurrent logic. The WQFN-MR package exposes an exposed thermal pad and offers good thermal dissipation in dense designs. The device also supports USB legacy and modern BIOS hand-off, enabling universal compatibility across Windows, Linux, and embedded RTOS hosts. Architecturally, the TUSB7320 uses a PCIe Gen 2 PHY paired with a protocol engine that handles transaction translation, scatter-gather DMA, and xHCI command ring processing. An embedded USB 3.0 PHY provides SuperSpeed signaling, while the USB 2.0 PHY supports the lower-speed pairs. The chip exposes SMBus for management, GPIO for port indicators, and JTAG for boundary-scan test. Typical applications include desktop PC motherboards, industrial embedded PCs, USB 3.0 PCIe add-in cards, docking stations, point-of-sale terminals, industrial PCs, and test-and-measurement chassis that need reliable downstream USB 3.0 connectivity. The pin-compatible TUSB7340 covers the same use cases where four ports are required. When designing with this part, allocate a solid ground reference under the WQFN thermal pad and stitch vias to inner ground planes for the 5 Gbps signal integrity. Provide adequate bulk capacitance on the 1.1 V and 3.3 V rails and follow TI reference layout for PCIe routing (90 ohm differential, length-matched within 150 mil). This page synthesizes distributor pricing, drop-in alternatives, application context, and design guidance that go beyond a single datasheet table.
TUSB7320RKMT - 2-Port USB 3.0 xHCI Controller | Texas Instruments
The Texas Instruments TUSB7320RKMT is a USB 3.0 2-port xHCI host controller with a PCIe x1 Gen 2 host-system interface, supplied in a 100-pin RKM WQFN package with an exposed pad. The controller operates from 1.1 V and 3.3 V supply rails and is specified for a 0°C to 70°C ambient temperature range in the RKMT configuration. Its two downstream ports make it suitable for compact host systems requiring more than one SuperSpeed USB connection. A USB host controller is a system interface IC that manages transactions between a host computer and attached USB peripherals. An xHCI controller supports USB 3.0 SuperSpeed as well as backward-compatible USB 2.0 operation. The TUSB7320 belongs to the USB interface controller hierarchy, combining USB device connectivity, PCIe host attachment, clocking, power management, and protocol handling in one surface-mount device. Key features include support for up to two downstream ports, USB 3.0 compliance, a PCIe x1 Gen 2 system interface, and a 9 x 9 mm 100-WQFN package with an exposed thermal pad. The exposed pad provides the primary path for heat dissipation and must be connected to the PCB ground plane according to the land pattern and thermal design guidance. Separate 1.1 V and 3.3 V supply requirements support internal core and I/O power domains. The TUSB7320 connects to the host system through PCIe while providing a structured USB interface for downstream ports. This division of responsibilities allows a processor or embedded host to enumerate devices, manage transfers, and control bus resources while the dedicated controller handles USB protocol activity. Exact lane, timing, current, and performance details should be confirmed against the manufacturer datasheet before a design is released for production. Typical applications include industrial embedded computers, medical equipment, test and measurement systems, set-top and media platforms, USB hubs or docking systems, and other embedded hosts that need multiple USB 3.0 ports. The two-port configuration is particularly useful where system space is constrained and separate downstream connectors are required without expanding to a four-port TUSB7340 implementation. PCB design should prioritize short high-speed USB and PCIe routes, continuous reference planes, adequate power decoupling, and thermal management around the exposed pad. Confirm the exact RKM land pattern, pin assignments, capacitor values, and routing constraints in the manufacturer datasheet before layout release. Prototype validation should also cover power sequencing, connector compliance, thermal rise, and simultaneous SuperSpeed and USB 2.0 device operation. This product page combines the exact TUSB7320RKMT ordering information, package and interface characteristics, manufacturer resources, pin-compatible alternatives, comparison points, and practical integration guidance. It is intended to help engineers qualify the device faster while preserving the distinction between the two-port TUSB7320 and the four-port TUSB7340.
TUSB7340IRKMT - USB 3.0 4-Port xHCI Host Controller | TI
The Texas Instruments TUSB7340IRKMT is a SuperSpeed USB 3.0-compliant 4-port xHCI host controller with a PCIe x1 Gen 2 host interface, 5 Gbps SuperSpeed throughput, and a 1.1 V core / 3.3 V I/O supply, housed in a 100-pin WQFN-MR (RKM) 9x9 mm package operating from -40C to +85C. A USB xHCI host controller is an interface IC that implements the eXtensible Host Controller Interface standard, offloading USB protocol management from the host CPU. In the power-management and interface hierarchy, it sits between a PCIe root complex and downstream USB physical ports, translating PCI Express transactions into USB 3.0 SuperSpeed, high-speed, full-speed, or low-speed traffic on each downstream port. Key features include four downstream USB 3.0 ports, support for SuperSpeed (5 Gbps), high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) data rates, and a PCIe x1 Gen 2 (5 GT/s) upstream link. This makes the TUSB7340 well suited to designs that must add multiple SuperSpeed ports to an x86 or embedded host with a single PCIe lane. Technically, the TUSB7340 integrates the xHCI controller, PCIe Gen 2 PHY, and USB 3.0 PHYs in CMOS on a single die, with power rails of 1.1 V (core) and 3.3 V (I/O and PHY). The integrated PHYs reduce bill-of-materials complexity and board area compared with discrete PHY-plus-controller architectures. According to the TI TUSB73x0 datasheet, the TUSB7340 and TUSB7320 share a pin-compatible 100-pin RKM package, enabling a common PCB design that supports either two-port or four-port configurations. Typical applications include docking stations, PCI Express add-in cards, embedded industrial computing, and motherboards requiring additional SuperSpeed ports. The four-port count directly addresses designs where hub-chip cascading is undesirable for latency or BOM reasons. Design consideration: because SuperSpeed links run at 5 Gbps, controlled-impedance routing of the USB 3.0 differential pairs and the PCIe link with proper reference planes is essential; follow the TI datasheet layout guidelines for the WQFN-MR exposed-pad package, which must be soldered to a ground pour for thermal and return-path integrity. This page synthesizes distributor pricing context, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
TUSB7340RKMR - 4-Port USB 3.0 xHCI Host Controller | TI
The Texas Instruments TUSB7340RKMR is a four-port USB 3.0 xHCI host controller with PCIe x1 Gen 2 host connectivity, 1.1 V and 3.3 V supply support, and a 100-pin WQFN exposed-pad package measuring 9 x 9 mm. It supports SuperSpeed, high-speed, full-speed, and low-speed USB downstream connections while implementing USB 3.0 xHCI host-controller functionality. An xHCI host controller is a type of USB interface controller used within the broader hierarchy of interface ICs, USB host controllers, and computer interface semiconductors. It centralizes host-side USB transaction handling, port management, and command scheduling in systems that need to manage multiple external USB devices through one host interface. The TUSB7340 is intended for embedded systems, industrial equipment, test systems, and other designs that need more than a conventional two-port host controller. The principal feature of the TUSB7340RKMR is support for up to four downstream USB ports. According to the Texas Instruments TUSB7340 product page, the device is a SuperSpeed USB 3.0 four-port xHCI host controller. Its host-system interface is PCIe x1 Gen 2, allowing the controller to communicate with a host processor over a high-speed serial link. The device also supports USB 2.0 device speeds, providing backward compatibility for devices that do not operate at SuperSpeed. The TUSB7340 uses a 100-pin RKM WQFN package with an exposed thermal pad and operates from low-level 1.1 V and 3.3 V supplies identified in the manufacturer documentation. This split-supply arrangement supports low-power and high-speed sections of the controller. Thermal performance depends on effective copper area under the exposed pad, PCB layer count, airflow, and the total power dissipated by the controller during link training and USB traffic. Typical applications include embedded computing platforms, industrial test equipment, set-top and media systems, data-acquisition systems, and external USB port expanders. In each case, the controller provides a standardized way for a PCIe-capable host processor to manage up to four USB downstream ports. System firmware must provide xHCI initialization, device enumeration, power management, and driver support through the host operating system. PCB implementation should prioritize the exposed-pad connection, PCIe signal integrity, and USB SuperSpeed routing. Place the exposed pad on a solid thermal and ground plane, use a continuous via field where appropriate, and follow the reference-plane and length-matching guidance in the manufacturer datasheet. Keep high-speed differential routes away from noisy power-conversion nodes. This product page combines manufacturer interface details, ordering information, packaging constraints, and engineering guidance into a focused selection reference. It also distinguishes genuine pin-compatible alternatives from parts that merely share a generic controller category, helping engineers assess whether a substitution preserves USB topology, PCIe connectivity, electrical rails, and the 100-pin RKM land pattern.
TUSB7340RKMT - USB 3.0 4-Port xHCI Host Controller | Texas Instruments
The Texas Instruments TUSB7340RKMT is a SuperSpeed USB 3.0 four-port xHCI host controller that bridges a PCI Express host bus to as many as four downstream USB 3.0 ports, powered from 1.1 V core and 3.3 V I/O rails and housed in a 100-pin WQFN-MR (RKM) 9 x 9 mm surface-mount package. An xHCI (eXtensible Host Controller Interface) host controller is the standardized silicon interface that allows a host processor to enumerate, configure and manage attached USB devices through a single register model rather than a legacy host-controller stack. In the device hierarchy, the TUSB7340RKMT is a USB interface IC, which is a subclass of interface IC within the broader integrated-circuit and semiconductor categories, and it is frequently placed alongside Type-C port controllers and USB hubs on the same board. Key features include support for up to four downstream SuperSpeed USB 3.0 ports, a PCI Express device interface for host attachment, I2C configuration access, and dual-rail 1.1 V core / 3.3 V I/O operation. The RKM package exposes a thermal pad for improved heat spreading, and the device is offered in a commercial temperature grade as well as industrial-grade orderable variants sharing the identical 100-pin footprint. Architecturally, the TUSB7340 family is designed so that the TUSB7320 and TUSB7340 devices share a pin-compatible 100-pin RKM package, so a design can move between a two-port and a four-port implementation without a PCB respin. The host-facing PCIe link, the UTMI/ULPI-style device-side PHY signalling, and the low-power 1.1 V core rail let the controller sit between the processor root complex and external USB connectors while keeping the number of external active components low. Typical applications include docking stations and port-replicator designs, industrial human-machine interface panels, embedded servers and thin clients, test and measurement instrumentation, medical cart and diagnostic console hardware, and multi-display or multi-storage peripheral platforms where several SuperSpeed devices attach to one host. When laying out the board, allocate a solid ground plane under the exposed thermal pad, place the 1.1 V and 3.3 V decoupling capacitors close to their supply pins, keep the PCIe reference-clock and differential pairs routed with matched impedance, and confirm the downstream port count against your cable and connector plan before committing to the footprint. This page consolidates the TUSB7340 family documentation, package and pin-count details, drop-in replacement options in the same 100-pin RKM footprint, and practical layout guidance that is not collected in a single manufacturer document.
TUSB8020BPHP - 2-Port USB 3.0 Hub 5Gbps | Texas Instruments (Tape & Reel)
The Texas Instruments TUSB8020BPHP is a two-port SuperSpeed USB 3.0 hub controller that supports 5.0 Gbps upstream and downstream signaling, housed in a 48-pin HTQFP (PHP) package measuring 7x7 mm. It provides simultaneous SuperSpeed and high-speed/full-speed connections on the upstream port while offering SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream ports, making it a true multi-speed USB 3.0 compliant hub. The device operates from 1.1 V and 3.3 V supplies and exposes USB, GPIO, I2C, and SMBus interfaces for host-side configuration. A USB hub is a device that expands a single USB host port into multiple downstream ports, allowing several peripherals to share one upstream connection. The TUSB8020B belongs to the USB hub controller product family within the broader interface IC taxonomy (USB hub controller -> interface IC -> integrated circuit -> semiconductor). USB 3.0 hubs operate at 5 Gbps SuperSpeed, which is roughly ten times faster than USB 2.0 high-speed (480 Mbps), and are required to remain backward compatible with USB 2.0 and USB 1.1 devices through dedicated signaling pipelines. Key features include two downstream ports, full SuperSpeed 5 Gbps support per port, integrated termination and pull-up/pull-down resistors, per-port or ganged power switching control, configurable through I2C/SMBus, and individual port overcurrent detection. The device supports battery charging (BC1.2) detection logic when paired with an external charger IC. Its commercial temperature range of 0C to 70C and HTQFP package make it suitable for consumer docking stations, monitors, and embedded platforms. The TUSB8020B uses a UTMI/UTMI+ (USB 2.0 Transceiver Macrocell Interface) plus a PIPE (PHY Interface for the PCI Express and USB 3.0 Architectures) physical interface to its internal PHYs, eliminating the need for external PHY components. The hub transaction translator manages bandwidth sharing between USB 2.0 and USB 3.0 traffic streams. Typical applications include desktop and laptop docking stations, USB 3.0 port expanders, multi-function monitors, embedded system host boards, industrial PCs, and storage enclosures with multiple USB 3.0 connectors. When designing with this part, provide a 12 MHz crystal or clock reference and follow the USB 3.0 layout guidelines: 90-ohm differential impedance for SuperSpeed pairs, length matching within 150 mil, and continuous reference planes on adjacent layers. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, application circuits, and practical design notes not consolidated on the manufacturer datasheet landing page.
TUSB8020BPHPR - 2-Port USB 3.0 Hub 5Gbps | Texas Instruments
The Texas Instruments TUSB8020BPHPR is a two-port SuperSpeed USB 3.0 hub controller that supports 5.0 Gbps upstream and downstream signaling, housed in a 48-pin HTQFP (PHP) package measuring 7x7 mm. It provides simultaneous SuperSpeed and high-speed/full-speed connections on the upstream port while offering SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream ports, making it a true multi-speed USB 3.0 compliant hub. The device operates from 1.1 V and 3.3 V supplies and exposes USB, GPIO, I2C, and SMBus interfaces for host-side configuration. A USB hub is a device that expands a single USB host port into multiple downstream ports, allowing several peripherals to share one upstream connection. The TUSB8020B belongs to the USB hub controller product family within the broader interface IC taxonomy (USB hub controller -> interface IC -> integrated circuit -> semiconductor). USB 3.0 hubs operate at 5 Gbps SuperSpeed, which is roughly ten times faster than USB 2.0 high-speed (480 Mbps), and are required to remain backward compatible with USB 2.0 and USB 1.1 devices through dedicated signaling pipelines. Key features include two downstream ports, full SuperSpeed 5 Gbps support per port, integrated termination and pull-up/pull-down resistors, per-port or ganged power switching control, configurable through I2C/SMBus, and individual port overcurrent detection. The device supports battery charging (BC1.2) detection logic when paired with an external charger IC. Its commercial temperature range of 0C to 70C and HTQFP package make it suitable for consumer docking stations, monitors, and embedded platforms. The TUSB8020B uses a UTMI/UTMI+ (USB 2.0 Transceiver Macrocell Interface) plus a PIPE (PHY Interface for the PCI Express and USB 3.0 Architectures) physical interface to its internal PHYs, eliminating the need for external PHY components. The hub transaction translator manages bandwidth sharing between USB 2.0 and USB 3.0 traffic streams. Typical applications include desktop and laptop docking stations, USB 3.0 port expanders, multi-function monitors, embedded system host boards, industrial PCs, and storage enclosures with multiple USB 3.0 connectors. When designing with this part, provide a 12 MHz crystal or clock reference and follow the USB 3.0 layout guidelines: 90-ohm differential impedance for SuperSpeed pairs, length matching within 150 mil, and continuous reference planes on adjacent layers. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, application circuits, and practical design notes not consolidated on the manufacturer datasheet landing page.
TUSB8040A1RKMR - 4-Port USB 3.0 Hub, 100-WQFN | Texas Instruments
The Texas Instruments TUSB8040A1RKMR is a four-port USB 3.0 compliant hub controller housed in a 100-pin WQFN-MR (9x9 mm) package with an exposed thermal pad, operating from a single 3.3V supply over the commercial 0C to 70C temperature range. The device supports simultaneous SuperSpeed USB (5 Gbps) and high-speed or full-speed signaling on the upstream port, while each downstream port independently supports SuperSpeed, high-speed, full-speed, or low-speed connections, making it a flexible building block for hosts that must expose multiple downstream USB devices. A USB hub is a tier-1 interconnect device in the USB topology that expands one upstream port into multiple downstream ports while managing transaction translation, power distribution, and signaling at each speed node. The TUSB8040A1 family implements a USB 3.0 SuperSpeed transaction translator along with the classic USB 2.0 hub repeater logic on a single die, exposing configuration pins, GPIOs, and battery-charging controls so designers can scale the same part from low-cost consumer docks to high-port-count industrial hosts. Key features include support for USB 3.0 SuperSpeed on all four downstream ports, integrated USB 2.0 hub repeater logic, configurable downstream port power switching and over-current inputs, an I2C/SMBus slave interface for status and configuration, multi-status LED indicators, and pin-selectable SMBus or I2C address options. The 100-pin WQFN-MR footprint provides a compact thermal path through the exposed pad, allowing sustained 5 Gbps operation without external heatsinking in well-ventilated enclosures. Architecturally, the TUSB8040A1 combines a USB 3.0 physical layer capable of 5 Gbps serial signaling, a SuperSpeed transaction translator, a USB 2.0 high-speed hub controller, and an integrated power-management block that handles per-port VBUS switching and over-current fault reporting. The configuration strap pins, combined with the I2C/SMBus interface, allow firmware to control per-port battery-charging modes, compound hub behavior, and the device's dual-role flexibility. Typical applications include USB 3.0 docking stations, desktop and laptop port-replicators, industrial PCs with multiple USB peripherals, embedded platforms requiring USB-3 Vision or USB mass-storage fan-out, and embedded host boards for point-of-sale, kiosk, and test-and-measurement systems where a processor only exposes one upstream USB-3 port but the design requires multiple downstream USB-3 endpoints. When designing with the TUSB8040A1, follow the High-Speed PCB layout guidelines in the manufacturer datasheet: route the SuperSpeed differential pairs with 90 ohm differential impedance, place the 12 MHz crystal close to the XI/XO pins, and connect the exposed thermal pad to a solid ground plane. Per-port VBUS switches must be sized for the cumulative downstream load and protected against inrush faults to comply with USB-IF compliance testing. This page synthesizes distributor stock data, cross-reference alternatives, and practical PCB layout notes that go beyond the manufacturer datasheet, helping engineers select and integrate the TUSB8040A1RKMR quickly into new USB-3.0 host designs.
TUSB8040PFP - USB 3.0 4-Port Hub Controller | Texas Instruments
Texas Instruments TUSB8040PFP is a SuperSpeed USB 3.0 four-port hub controller in an 80-pin HTQFP (PFP) package measuring 12 x 12 mm. It is designed to manage one upstream USB connection and four downstream ports, providing a central interface between a USB host and multiple peripherals. The device supports SuperSpeed, High-Speed, and Full-Speed USB operation, making it suitable for systems that need a managed multi-port USB interface. A USB hub controller is an interface integrated circuit that coordinates traffic between a host and attached USB devices. It belongs to the hierarchy of USB interface controllers, interface integrated circuits, and general-purpose semiconductors. Rather than acting as a data endpoint, the controller implements hub functions such as port enumeration, connection management, and routing traffic between the upstream port and downstream ports. These functions allow several peripherals to share one host-side USB connection. The principal feature of the TUSB8040 is its four-port hub architecture. Each downstream connection can participate in the USB topology managed by the upstream port, while SuperSpeed operation supports devices and links requiring the higher bandwidth of USB 3.0. High-Speed and Full-Speed support also allows compatible USB 2.0 and USB 1.1 devices to remain connected. The manufacturer identifies the TUSB8040PFP as a USB 3.0-compliant four-port hub controller. The TUSB8040PFP uses an 80-pin HTQFP package identified by the PFP ordering code. Its exposed thermal-pad construction provides a practical path for heat transfer from the controller on a PCB designed for adequate copper area. The exact electrical limits, internal USB transceiver details, auxiliary supply requirements, and pin-level signal assignments should be taken from the Texas Instruments TUSB8040 data sheet rather than inferred from the distributor summaries. Typical uses include industrial USB data acquisition, USB-to-Ethernet adapters, peripheral docking stations, test equipment, and embedded systems that expose multiple USB connections through one host port. The controller is also appropriate for systems requiring backward compatibility with lower-speed USB devices. Board-level implementation must preserve the USB routing and power-delivery requirements associated with four SuperSpeed downstream channels. When laying out a TUSB8040PFP design, give priority to the upstream and downstream SuperSpeed differential pairs, maintain the routing geometry specified in the data sheet, and place the prescribed input, output, and bypass capacitors close to their associated pins. Thermal performance depends on the exposed pad being connected to a suitable copper plane and the assembled PCB reaching its intended temperature range. This product record combines the verified manufacturer and distributor identity, package, interface type, port count, USB version, and commercial temperature information with practical application, sourcing, and design guidance. It also distinguishes a directly purchasable 80-pin PFP configuration from related TI hub controllers that use different package formats and therefore are not treated as drop-in replacements.
TUSB8041ARGCR - 4-Port USB 3.1 Hub Controller | Texas Instruments
The Texas Instruments TUSB8041ARGCR is a 4-port SuperSpeed USB 3.1 Gen1 hub controller operating at 5 Gbps, housed in a 64-pin VQFN (RGC) 9x9 mm package with exposed thermal pad. It provides upstream USB 3.0 connectivity and four downstream ports, each capable of SS (5 Gbps), HS (480 Mbps), FS (12 Mbps), and LS (1.5 Mbps) signaling. A USB hub is a USB class-defined device that expands a single upstream USB port into multiple downstream ports while managing power, enumeration, and transaction translation. The TUSB8041 family sits within the broader hierarchy of USB controllers, peripheral interface ICs, and interface ICs in the semiconductor taxonomy. It supports USB Type-A downstream ports and is commonly used to add four ports to a system with a single USB 3.0 upstream port. Key features of the TUSB8041ARGCR include support for USB Battery Charging (BC) 1.2 charging downstream ports, integrated 5-V tolerant I/O, per-port power switching with individual enable control, and configuration via GPIO, I2C, or SMBus interfaces. The device also supports USB Type-C port-reversal logic when used with an external Type-C controller, and offers pin-selectable upstream port configuration. Internal spread-spectrum clocking reduces EMI on the SuperSpeed signal paths. The architecture combines a USB 2.0 hub controller and a USB 3.0 hub controller on a single die, sharing common configuration logic. Per-port SuperSpeed PHY blocks operate independently, and traffic scheduling is managed by a hardware transaction translator. The device enumerates as a compound USB hub and supports standard USB hub class commands plus vendor-specific commands for charger-port behavior and GPIO control. Typical applications include USB expansion in desktop motherboards, docking stations, automotive infotainment head units, industrial PCs, monitor USB hubs, and embedded computing platforms that require multiple downstream USB 3.0 ports from a single host connection. The wide industrial temperature support enables in-vehicle and factory-floor deployment. When designing with this part, observe the PCB layout guidelines in the datasheet: keep the SuperSpeed differential pairs matched to 85 ohm differential impedance, decouple each VBUS supply pin with a 0.1 uF ceramic capacitor, and place the upstream port common-mode chokes close to the connector. Daisy-chained hubs are supported up to 5 tiers per USB specification. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical PCB layout notes not consolidated in the manufacturer datasheet alone.
TUSB8041ARGCT - 4-Port USB 3.1 Gen1 Hub Controller | Texas Instruments
The Texas Instruments TUSB8041ARGCT is a 4-port SuperSpeed 5-Gbps USB 3.1 Gen1 hub controller in a 64-pin VQFN (RGC) 9x9 mm package with an exposed thermal pad. The device integrates four downstream USB ports that simultaneously support Low-Speed, Full-Speed, High-Speed, and SuperSpeed signaling, delivering up to 5 Gbps per downstream port while presenting a single upstream USB 3.1 Gen1 Type-A or Type-C interface to the host. A USB hub controller is an interface IC that multiplies a single upstream USB port into multiple downstream ports while preserving protocol compliance, port power switching, and per-port status reporting. Hubs occupy a fixed position in the USB device-class hierarchy between the host controller root hub and downstream peripherals. Modern SuperSpeed hubs additionally embed PHYs and link-training state machines so legacy USB 2.0 traffic and 5 Gbps SuperSpeed traffic are bridged transparently across the same physical connector stack. The TUSB8041ARGCT provides per-port battery-charging detection, downstream-port power-enable controls routed through GPIO, and over-current flag inputs that simplify USB Type-A VBUS switching designs. Configuration is achieved through pin-strap modes, OTP ROM, an external I2C EEPROM, or an I2C/SMBus slave interface for VID, PID, and custom-string descriptors. The integrated 1.1 V core LDO and 3.3 V I/O supply mean only a single external 3.3 V rail is required for the hub itself. Typical applications include desktop and laptop docking stations, retail POS terminals, industrial PCs, USB 3.0/3.1 port replicators, automotive infotainment hubs, and embedded systems that fan out a single Type-C upstream port into multiple USB Type-A ports. The -40C to +85C industrial temperature range supports deployment in factory automation and vehicle environments. When designing with the TUSB8041ARGCT, route the SuperSpeed differential pairs (USB3_TX/RX) for 85 ohm differential impedance with intra-pair length matching within 150 mil, and provide an external 24 MHz crystal with the datasheet-recommended load capacitors. Place the upstream port ESD protection array adjacent to the USB connector and verify the bulk-decoupling ESR budget against the 5V VBUS load step on hot-plug events. This page synthesizes distributor pricing from DigiKey and Arrow, cross-references the TUSB8041A 'A' revision orderability codes (RGC = tape-and-reel, RGT = tray), and provides drop-in alternatives plus design notes not collected in any single datasheet document.
TUSB8041IPAPRQ1 - Automotive 4-Port USB 3.0 Hub | Texas Instruments
The Texas Instruments TUSB8041IPAPRQ1 is an automotive-grade, four-port, SuperSpeed 5-Gbps USB 3.0 hub controller in a 64-pin HTQFP (PAP) 10x10 mm package with exposed thermal pad, qualified to AEC-Q100 standards and operating across -40C to +85C. It supports simultaneous SuperSpeed, Hi-Speed, Full-Speed and Low-Speed upstream connections while delivering full backward compatibility on every downstream port. A USB hub controller is a class of interface IC that aggregates one upstream USB port into multiple downstream ports, managing enumeration, power switching, transaction translation and battery-charging detection across every port. The TUSB8041 sits in a hierarchy of USB Type-C and USB-C hub ICs, which themselves belong to the broader interface ICs and connectivity category within mixed-signal semiconductors. The Q1 suffix designates AEC-Q100 qualification, meaning the device is engineered and tested for the temperature, vibration and reliability stresses of in-vehicle electronics such as infotainment head units, telematic control units and rear-seat entertainment modules. Key specifications include four downstream ports, integrated USB 2.0 hub with multi-translation support, configurable via I2C, SMBus, GPIO and pin straps, and 1.1V / 3.3V dual-rail operation. The PAP variant of the family uses the 64-HTQFP footprint (10 mm x 10 mm) and offers broad flexibility for USB Type-C deployments when paired with a downstream crosspoint switch or PD controller. Typical applications include automotive head-unit USB expansion, rear-seat USB charging hubs, telematic USB pass-through, factory-floor USB test rigs and embedded computing platforms that need multiple USB-3 connections from a single root port. Because the device supports per-port power switching via the USB specification and individual over-current flags, designers can implement ganged or individual port power policies directly through hardware strap settings. When evaluating USB-3 hub alternatives, confirm that any candidate supports simultaneous SuperSpeed on all four ports, matches the 64-HTQFP land pattern, retains the I2C/SMBus configuration interface and meets AEC-Q100 grade-2 or stricter temperature targets. Note that 3.3 V supply noise from upstream regulators must remain below the threshold documented in TI's USB-3 hub electrical spec section, otherwise link-training jitter on SuperSpeed pairs can rise substantially.
TUSB8041IRGCT - 4-Port USB 3.0 Hub 5Gbps VQFN-64 | Texas Instruments
The Texas Instruments TUSB8041IRGCT is a four-port SuperSpeed USB 3.0 hub controller delivering 5 Gbps per port, housed in a 64-pin VQFN (RGC, 9x9 mm) package and rated for -40C to +85C industrial operation. A USB 3.0 hub controller is an integrated circuit that fans a single upstream SuperSpeed USB link out to multiple downstream ports, handling enumeration, transaction translation, and power management transparently to the host. Hub controllers sit in the USB interconnect tier of the system I/O hierarchy: host controller -> hub controller -> downstream devices, bridging the gap between a PC or embedded host and the peripherals it must serve. The TUSB8041 supports USB 3.0 SuperSpeed (5 Gbps) operation on all four downstream ports while remaining backward compatible with USB 2.0 and USB 1.1 devices on the same ports. It provides GPIO, I2C, and SMBus interfaces for configuration and status monitoring, allowing designers to customize hub behavior, set port modes, and read fault status in embedded systems. The industrial temperature rating (-40C to +85C) of the TUSB8041I variant makes it suitable for deployments beyond office-climate conditions. Architecturally, the device integrates the SuperSpeed hub repeater, USB 2.0 hub engine, and configuration ROM/EEPROM loading logic in a single die. Configuration can be performed via an external serial EEPROM or through the SMBus/I2C host interface, eliminating external glue logic. Integrated charge-pump and linear regulators generate the internal core supply from a single 3.3 V rail, simplifying power tree design. Typical applications include docking stations, port replicators, industrial PC and HMI USB expansion, embedded computing boards, and test and measurement instrumentation that requires multiple robust SuperSpeed ports from one upstream connection. Design consideration: USB 3.0 is a multi-gigabit differential signaling standard, so the 90-ohm differential impedance routing, length matching, and AC-coupling capacitor placement for the SuperSpeed pairs dominate signal integrity; place the device close to both the upstream connector and EEPROM, and follow the layout guidelines in the manufacturer datasheet. This page synthesizes verified distributor data, drop-in alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet alone, with pricing references stated as of 2026-09-03.
TUSB8041RGCR - 4-Port USB 3.0 Hub 5Gbps | Texas Instruments
The Texas Instruments TUSB8041RGCR is a four-port SuperSpeed USB 3.0 hub controller delivering 5-Gbps data rates per port, powered from dual 1.1V and 3.3V supplies and housed in a 64-pin VQFN (RGC) package measuring 9x9 mm with an exposed pad. A USB hub controller is an integrated circuit that fans out a single upstream USB connection into multiple downstream ports, handling enumeration, packet routing, and power management per the USB 3.0 specification. Within the system hierarchy it sits at the interface-IC layer, bridging the USB physical layer and the host controller of a computer, docking station, or embedded processor. Key features include four downstream SuperSpeed ports supporting 5 Gbps, backward compatibility with USB 2.0 full-speed and high-speed traffic, and configuration via GPIO, I2C, or SMBus interfaces for flexible SMBus-based platform integration. The device supports battery charging scenarios and standard hub power management, and TI offers both commercial (0C to 70C) and industrial (-40C to 85C) temperature grades in the same 64-pin RGC footprint. Architecturally, the TUSB8041 integrates the SuperSpeed repeater/retimer functions and hub transaction logic on a single die, using internal PLL-based clocking to regenerate the 5-Gbps link. The dual-rail 1.1V core / 3.3V I2V supply scheme reduces core power while maintaining signaling compliance, and the exposed-pad VQFN package provides low-inductance ground return for the high-speed differential pairs. Typical applications include PC motherboards and docking stations, monitors and displays with integrated USB hubs, industrial PCs requiring multiple USB 3.0 ports, and self-powered or bus-powered peripheral hubs. The 5-Gbps throughput makes it suitable for external storage, video capture, and camera aggregation. When designing with the TUSB8041, maintain 90-ohm differential impedance on the SuperSpeed pairs, keep them short and matched, and decouple both the 1.1V and 3.3V rails with low-ESR ceramics close to the pins. Configuration strapping or an I2C EEPROM must be present for non-default VID/PID settings. This page synthesizes distributor pricing, temperature-grade alternatives, and practical design notes not found in the manufacturer datasheet, verified as of 2026-09-03.
TUSB8041RGCT - 4-Port 5Gbps USB 3.0 Hub Controller | TI
Texas Instruments TUSB8041RGCT is a four-port USB 3.0 hub controller with 5-Gbps SuperSpeed USB operation, GPIO, I2C, and SMBus interfaces, and a 64-pin VQFN package measuring 9 x 9 mm. It supports 3 V to 3.6 V operation alongside a 0.99 V to 1.26 V internal rail and provides BC1.2 protocol support, downstream port power-switch control, and overcurrent protection. A USB hub controller is an interface IC that manages one upstream USB connection and multiple downstream ports. Within the semiconductor hierarchy, it is a USB interface controller, then an interface IC, then an integrated circuit. By coordinating traffic, power, and attach events across four ports, this type of device reduces the host burden associated with multiple USB peripherals. The four downstream ports support simultaneous SuperSpeed, high-speed, and full-speed USB connections. A 5-Gbps SuperSpeed data path suits storage peripherals, docking equipment, and other bandwidth-intensive devices when the connected host and cables provide the required USB 3.0 support. The controller also includes GPIO, I2C, and SMBus connectivity for configuration, monitoring, and board-level control functions. Power-management features include downstream port power-switch control and overcurrent protection. The 3 V to 3.6 V operating range accommodates common 3.3 V system rails, while the 0.99 V to 1.26 V range corresponds to the lower-voltage internal supply requirement. BC1.2 protocol support adds compatibility with common USB battery-charging control conventions. Typical implementations include USB docking stations, multi-port desktop and industrial peripherals, data-storage hubs, embedded USB expansion boards, and test systems that require more than one downstream USB connection. The 64-pin VQFN keeps the controller compact while exposing four downstream ports and dedicated hub-management functions. PCB implementation requires careful high-speed signal routing, solid supply-plane design, and thermal management around the exposed pad. Place USB differential pairs according to the manufacturer layout guidance, maintain continuous reference planes, and decouple each supply rail close to the device. This page also organizes sourcing, replacement, comparison, and application guidance around the controller's four-port, 5-Gbps architecture.