Interface ICs
ژێرپۆلەکان
بەرهەمەکان (5,100+)
BCM5389IFBG - 8-Port Gigabit Ethernet Switch | Broadcom
The Broadcom BCM5389IFBG is an 8-port Gigabit Ethernet switch with integrated SerDes in a 256-pin FBGA package. It combines eight 1000 Mb/s SGMII/SerDes ports, one GMII/RGMII/RvMII interface, nine IEEE 802.x-compliant MACs, a 128 KB packet buffer, and support for 9 KB jumbo frames. Its 1.2 V operating supply makes it suitable for compact, power-conscious SOHO and subnet networking equipment. An Ethernet switch is a semiconductor that forwards Ethernet frames between connected ports using dedicated MAC addresses. The BCM5389IFBG belongs to the Ethernet switch hierarchy, where it integrates multiple physical-layer-facing SerDes interfaces with frame-processing logic. This consolidation allows a router, gateway, or subnet switch to support multiple Gigabit Ethernet links without requiring eight separate external switch devices. Its integrated SerDes also reduces board-level interconnect requirements compared with solutions using discrete PHY components. Key features include eight Gigabit Ethernet ports, eight SGMII/SerDes interfaces, one selectable GMII, RGMII, or RvMII interface, and nine compliant MACs. The device supports 128 KB of packet buffering and 9 KB jumbo frames. According to the Broadcom datasheet indexed by the verified sources, it complies with IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x, including MAC control, pause-frame, and autonegotiation behavior. These standards provide the foundation for Fast Ethernet, Gigabit Ethernet, flow control, and compatible network interoperability. The eighth-generation switch-on-chip architecture is intended to reduce the external component count of multiport network products. Eight integrated SerDes interfaces can expose copper or optical network links through suitable PHY or transceiver circuitry, while the GMII/RGMII/RvMII interface connects the switching system to a host processor or uplink controller. The 256-pin FBGA package supports high-density routing but requires careful escape-routing and via-in-pad or fanout-aware PCB construction. Typical applications include SOHO routers, residential gateways, Ethernet subnet switches, network appliances, and industrial or embedded systems that aggregate multiple Gigabit Ethernet links. The 1.2 V supply and integrated SerDes can simplify power-tree design and reduce PCB area, but the high-density BGA package, multi-rail sequencing requirements, and high-speed signal integrity demands careful reference-plane continuity, decoupling, and connector-return-path planning. The principal design challenge is preserving signal integrity across the short, dense escape paths between the FBGA device and external PHY, magnetics, and connector hardware. Differential SerDes routing should use a continuous reference plane, controlled impedance, minimal stubs, and tightly placed decoupling. Differential pair geometry, via transitions, and return paths must be validated with the actual PCB stack-up and connector models. This page consolidates verified Broadcom and distributor information into an application-oriented engineering summary, including the switch architecture, interface hierarchy, package implications, design cautions, and the one same-family drop-in candidate supported by the supplied cross-reference evidence. Pricing and lead time remain distributor-dependent and should be confirmed for the requested quantity as of the current sourcing date.
BCM5389KFB - 8-Port Gigabit Ethernet Switch | Broadcom
Broadcom BCM5389KFB is an 8-port Gigabit Ethernet switch with integrated SerDes, a 9-Gigabit non-blocking switch fabric, and a 256-BGA package measuring 17 x 17 mm. The verified source data identifies one GMII/RGMII/RvMII interface, nine 802.x-compliant MACs with 9-KB jumbo-frame support, eight SGMII/SerDes interfaces, 128-KB packet-buffer memory, and an SPI control interface. An Ethernet switch is a semiconductor that connects multiple network endpoints through a shared internal fabric, forwarding Ethernet frames according to learned or configured addresses. The BCM5389 belongs to the switch-controller and Ethernet-interface hierarchy, integrating access-port connectivity, integrated SerDes, MAC processing, packet buffering, and host configuration into one highly integrated network controller. The headline feature set is tailored to multiport Ethernet equipment: eight SGMII/SerDes ports, a 9-Gigabit aggregate non-blocking fabric, 128 KB of packet-buffer memory, and nine compliant MACs. The SPI interface provides configuration and control access, while GMII/RGMII/RvMII support broadens host-side and uplink connectivity. A maximum 9-KB frame size accommodates jumbo traffic and avoids unnecessary fragmentation on supported links. The 256-BGA package concentrates substantial networking functionality into a compact 17 x 17 mm surface-mount footprint. Its many balls support high-density interconnect requirements but also demand careful PCB escape routing, via geometry, ground distribution, and assembly-process control. Exact electrical limits, clocking requirements, SerDes rates, voltage rails, and environmental ratings were not supplied in the verified data and must be confirmed in the manufacturer documentation before design release. Typical uses include Gigabit Ethernet switches, industrial Ethernet equipment, access-network appliances, embedded network gateways, and aggregation equipment that needs multiple copper or PHY-facing ports. The integrated SerDes makes the device relevant to designs where compactness, deterministic fabric throughput, and centralized packet handling are more important than a simple standalone PHY. Designers should treat the complete BCM5389 reference design, including power planes, decoupling, clocking, SerDes channel routing, reset sequencing, and PHY integration, as the starting point. SPI firmware must configure ports, packet handling, MAC behavior, and management settings consistently. Do not infer pin compatibility, power rails, timing, or automotive qualification from the package name alone. This page consolidates the verified distributor description, Octopart sourcing information, architecture features, procurement context, and practical integration cautions. It distinguishes documented BCM5389 capabilities from parameters that still require manufacturer confirmation, helping engineers identify the device efficiently without presenting unverified specifications as facts.
BCM5389KFBG - 8-Port Gigabit Ethernet Switch | Broadcom
Broadcom BCM5389KFBG is an 8-port Gigabit Ethernet switch with integrated SerDes, an SPI controller interface, and a 256-BGA package measuring 17 x 17 mm. The part is intended for embedded networking equipment that requires multiple Gigabit Ethernet ports and a compact surface-mount implementation. Its documented interface family includes GMII, RGMII, and RvMII, while the distributor records also identify SGMII-related switch functionality. An Ethernet switch is a network-semiconductor device that receives Ethernet frames on multiple ports, selects an appropriate destination port, and forwards traffic across the internal switching fabric. The BCM5389 belongs to the broader hierarchy of Ethernet controllers, interface controllers, network semiconductors, and communication ICs. Integrating eight Gigabit Ethernet ports with SerDes capability can reduce the component count required in gateways, access equipment, and embedded switching platforms. The principal verified characteristics are the eight-port architecture, integrated SerDes, SPI interface, and 256-BGA (17 x 17 mm) package. The component is categorized by DigiKey as an Ethernet Switch with an SPI Interface, while Mouser describes it as an eight-port SGMII switch. These records establish the device's core positioning, but the supplied source snippets do not expose detailed electrical ratings for operating voltage, clock frequency, serializer lane rate, memory interfaces, or physical dimensions beyond the package size. The 256-BGA package is a high-pin-count surface-mount format intended for multilayer printed circuit boards. A successful implementation depends on exact land-pattern, ball-map, power-rail, clocking, SerDes routing, and thermal design information in the manufacturer documentation. Because the available source material provides only a short datasheet description and distributor summaries rather than the complete manufacturer PDF, no unverified switching capacity, latency, PHY count, SerDes standard, or pin-level functions are inferred here. Typical application spaces include carrier-grade and access-network switching, industrial Ethernet gateways, embedded routers, set-top and customer-premises equipment, and other multi-port networking systems. The eight Gigabit Ethernet ports suit centralized connectivity, while integrated SerDes can support backplane or interconnect links when the particular port configuration and supported electrical interface match the system architecture. Designers should verify the exact Broadcom reference design, supported boot and host interface requirements, pin assignments, reference voltage, and power-delivery network before layout release. The BGA package also requires careful escape routing, via arrays, plane splitting, and thermal-via placement. Any substitute must be checked against the complete ball map and electrical tables rather than selected from package dimensions alone. This page consolidates verified distributor pricing and inventory, candidate same-family comparisons, technical gaps, and practical implementation cautions. It adds sourcing context and replacement screening beyond the brief distributor snippets while clearly separating verified facts from parameters that still require confirmation from the complete Broadcom datasheet.
BCM53903B0IPB Communication Processor Interface IC | Broadcom
The Broadcom BCM53903B0IPB is a communication processor interface integrated circuit categorized as a communication processor with driver, receiver, and transceiver functions. The exact electrical ratings, operating limits, clocking requirements, and package dimensions are not stated in the available product listings, so engineers should use the Broadcom manufacturer datasheet for design decisions. The part is supplied under the ordering code BCM53903B0IPB and is associated with the BCM53903 family of Broadcom communication-processor interface devices. A communication processor interface IC is a semiconductor that connects a communications processor to physical communication circuitry. In the broader hierarchy, this device belongs to interface ICs, communication semiconductors, and network-access silicon. Drivers, receivers, and transceivers in this class translate signals between a digital processor and external circuitry while supporting reliable data transfer over cables, backplanes, or other communication media. The defining feature of BCM53903B0IPB is its integration within the BCM53903 communication-processor ecosystem. Because the available listings identify it as a communication processor rather than a generic transceiver, it is best evaluated for designs requiring compatibility with the associated Broadcom network or line-card architecture. The exact supported data rates, channel count, media interfaces, supply voltage, and I/O standards must be confirmed in the manufacturer documentation before schematic capture. Package-level information is critical when replacing this integrated circuit. The manufacturer documentation should be consulted for the exact lead configuration, exposed-pad requirements, pin assignments, soldering profile, and recommended land pattern. Do not infer the footprint from the ordering code alone, because the terminal and packing suffixes can represent different package, temperature, and shipping configurations. A mechanical comparison must precede any board-level substitution. Potential applications include communication-processor line cards, network interface equipment, telecom access systems, and data-communication equipment that relies on the BCM53903 signal interface. In these systems, the IC can support the physical-layer connection between the processor and external network circuitry. Actual suitability depends on the data rate, signaling standard, voltage domains, clock architecture, and isolation requirements defined in the complete system specification. The primary design consideration is controlled replacement planning. Confirm that any candidate has the same package, pinout, supply rails, I/O standards, operating-temperature range, and timing performance before it is treated as a drop-in part. Provide the manufacturer-recommended decoupling, clocking, layout, and thermal arrangements. This approach prevents a mechanically similar package from being mistaken for an electrically compatible replacement. This product record combines the available manufacturer and distributor information with package-validation guidance, sourcing questions, comparison criteria, and application-oriented engineering checks. It is designed to help engineers identify the correct BCM53903B0IPB configuration and prepare a controlled evaluation without substituting unverified electrical or mechanical assumptions.
BCM5395MIPBG - 5-Port Ethernet Switch | Broadcom
Broadcom BCM5395MIPBG is a five-port Gigabit Ethernet switch with five integrated physical-layer devices, GMII, RGMII, MII, and RvMII interfaces, non-volatile configuration storage, and interrupt generation in an FBGA package. It consolidates multi-port Ethernet connectivity into a single networking IC and is intended for systems that need local switching without implementing separate physical-layer devices for every port. An Ethernet switch is a semiconductor that receives Ethernet frames on one interface, examines their destination address, and forwards traffic to the appropriate output port. This device sits between the physical layer and the system network architecture: its integrated PHYs connect copper links, while GMII, RGMII, MII, and RvMII provide links to a host processor or another Ethernet controller. Its five-port architecture is suited to gateways, embedded network appliances, industrial controllers, and access equipment with several local Ethernet connections. The defining feature of the BCM5395MIPBG is the integration of five Ethernet PHYs with a five-port switching function. Supported interfaces include GMII, RGMII, MII, and RvMII, allowing the implementation to accommodate different host-clocking and signal-rate requirements. Non-volatile configuration storage retains device settings across power cycles, while interrupt generation allows the host processor to receive event notifications without continuous status polling. The BCM5395 family integrates physical-layer functions, packet buffering, and switching resources within one device. This integration can reduce the number of discrete network components required in an embedded Ethernet design and centralize port management. Because the exact clocking limits, electrical characteristics, operating temperature range, and power ratings depend on the complete manufacturer documentation, engineers should validate those details against the applicable Broadcom datasheet and reference design before releasing production hardware. Typical applications include industrial Ethernet gateways, embedded network appliances, access-point equipment, set-top platforms, and communication controllers requiring several local Gigabit Ethernet links. The integrated PHYs are especially useful where PCB area is constrained and the system requires multiple copper ports connected to a single host interface. RGMII can reduce host pin count in appropriate designs, while MII and GMII support legacy or lower-speed parallel-interface implementations. A successful design must preserve the exact pin assignments, reference clocks, supply sequencing, magnetics isolation, impedance-controlled differential pairs, and decoupling requirements specified for BCM5395MIPBG. Do not substitute a generic Ethernet PHY solely by port count; verify the package ball map, register behavior, interrupt configuration, non-volatile settings, and supported host interface before considering any replacement. This product page organizes the BCM5395MIPBG’s interface capabilities, application guidance, design checks, and verified sourcing information into a compact engineering reference. It also distinguishes documented functions from parameters that require confirmation from the manufacturer’s complete package and electrical documentation.
BCM5395MKFBG 5-Port Gigabit Ethernet Switch | Broadcom
Broadcom BCM5395MKFBG is a five-port Gigabit Ethernet switch with five integrated PHYs and integrated packet buffer. The device operates at 10 Mbps, 100 Mbps, and 1 Gbps Ethernet rates and is identified as a CMOS Ethernet interface IC. It is intended for embedded networking equipment requiring multiple copper Ethernet ports, local switching, and integrated MAC and PHY functions in one device. An Ethernet switch is a network-interface semiconductor that connects multiple Ethernet ports and forwards frames according to MAC addresses. A Gigabit Ethernet switch with integrated PHYs combines the physical-layer transceiver functions with switching and packet-buffer logic. This integration reduces the number of separate network components required in a compact design and provides a common interface for 10 Mbps, 100 Mbps, and 1 Gbps Ethernet connections. The BCM5395 family provides five integrated Gigabit PHYs and packet-buffer capacity within one Broadcom device. The listing identifies the part as a five-port switch and describes support for MII, RGMII, GMII, and RvMII operating interfaces. These interface choices support connection to a host processor, embedded controller, or another Ethernet block when the selected board configuration and electrical design meet the device requirements. The BCM5395 implementation uses CMOS technology and is categorized as an Ethernet interface and switching IC. Its five integrated PHYs are intended to reduce system complexity compared with a design using discrete Ethernet transceivers. The device is also associated with IEEE 802.3az Energy Efficient Ethernet support, making it relevant to network equipment that emphasizes power efficiency while retaining multiple Gigabit Ethernet ports. Typical applications include industrial Ethernet gateways, home-automation controllers, set-top and media devices, access-point equipment, embedded network appliances, and industrial control systems. For these applications, the five integrated PHYs can support multi-port copper networking while preserving a compact board layout. The available device information does not define the exact pin assignments, package dimensions, or detailed electrical limits. When designing around BCM5395MKFBG, verify the exact package land pattern, power rails, clock requirements, PHY characteristics, and interface voltage levels against the Broadcom datasheet before layout. Keep high-speed traces short, provide the recommended power and decoupling network, and follow the reference design for magnetics or PHY copper connectivity. This device should be selected only after checking that all five ports, supported media interfaces, and environmental requirements match the target system. This product page organizes the confirmed BCM5395MKFBG specifications, sourcing references, application context, and engineering trade-offs. It also separates explicitly documented facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate the switch without relying on incomplete distributor summaries.
BCM5395SIPB - 5-Port Gigabit Ethernet Switch | Broadcom
The Broadcom BCM5395SIPB is an integrated Ethernet switching IC associated with a five-port Gigabit Ethernet switch, combining five integrated physical-layer devices with an internal packet buffer in a single device. Distributor listings classify the SIPB ordering code under interface drivers, receivers, and transceivers, while the underlying BCM5395 device is described as a 5-port Gigabit Ethernet switch with five integrated PHYs and a packet buffer. Its exact package dimensions, pin count, electrical limits, and thermal ratings are not present in the supplied verified sources. An Ethernet switch is a semiconductor in the network-interface hierarchy: it connects multiple Ethernet ports, examines frame destinations, and forwards traffic only to the required output ports. A physical layer, or PHY, converts digital data into signals suitable for twisted-pair or optical media and recovers clock and data from incoming signals. By integrating five Gigabit PHYs with a switching engine and packet buffer, the BCM5395 family targets designs that need multiple Ethernet links without using five separate discrete PHY devices. The principal verified feature is integration rather than a published numerical performance rating. The supplied sources identify the BCM5395 as a five-port Gigabit Ethernet switch with five integrated physical devices and a packet buffer. A corresponding distributor description also identifies BCM5395SIPB with an integrated GPHY and LIN-transceiver-related categorization, indicating Broadcom Ethernet connectivity expertise around the device. Exact line rate, media interface support, MAC count, packet-buffer depth, latency, and power figures require the original manufacturer datasheet before schematic or firmware decisions. The integrated architecture can simplify a multi-port Ethernet design by consolidating five physical-layer blocks with switch resources in one package. Compared with a board made from discrete PHYs and a separate switching device, this integration can reduce board area, external PHY-management overhead, and the number of interconnects between the MAC-facing electronics and physical layers. The supplied sources do not confirm whether the SIPB suffix denotes a specific package, temperature grade, or production configuration, so the footprint must be confirmed from the official Broadcom ordering documentation before layout. Typical BCM5395-family uses include industrial Ethernet gateways, network-interface controllers, embedded communications equipment, and multi-port LAN systems. Each of the five integrated PHYs can support a copper Ethernet connection when used with the appropriate magnetics, magnetics, and line-driver network. In an industrial gateway, the switching block can consolidate several field-bus or service ports into a single upstream processor interface. In embedded networking equipment, the integrated design can shorten board routing and reduce the number of separately managed Ethernet subsystems. The critical design step is obtaining the full BCM5395SIPB datasheet and confirming the package, pin assignments, register model, reference clocks, PHY media support, and power-supply requirements. Do not assign PCB pads from distributor snippets alone. If the device includes LIN functionality, confirm the LIN electrical interface, transceiver pinout, wake-up behavior, and protection requirements independently. Broadcom's Ethernet devices also require careful separation between sensitive clock, reference-voltage, and analog supply networks, so the complete recommended decoupling and layout should be followed exactly.
BCM5395SIPBG - 5-Port Gigabit Ethernet Switch | Broadcom
Broadcom BCM5395SIPBG is a five-port Gigabit Ethernet switch with five integrated physical-layer devices and an integrated packet buffer in a surface-mount package. Each of its five switch ports supports operation at 1000 Mbps, while the integrated PHYs reduce the number of separate Ethernet transceiver components required in a network interface design. The packet buffer provides on-chip frame handling between the integrated ports and the host-facing interface. An Ethernet switch is a networking semiconductor that connects multiple Ethernet endpoints through a shared switching fabric. A five-port Gigabit Ethernet switch belongs to the interface IC and Ethernet switch hierarchy: it combines digital frame-processing logic, integrated packet buffering, and physical-layer transceiver functions. The integrated-PHY architecture simplifies board design compared with a discrete switch-and-PHY arrangement, although the complete system still requires suitable magnetic components, routing, power delivery, and signal-integrity implementation. The principal features of the BCM5395SIPBG are its five Gigabit Ethernet ports, five integrated PHYs, and integrated packet buffer. These functions support compact local-area-network designs for business, industrial, and embedded equipment. The five-port configuration can connect four external network devices while retaining one port for an uplink to a larger network, provided the host interface and firmware support the intended topology. Its 1000 Mbps-per-port capability supports Gigabit Ethernet links where higher bandwidth is required. The BCM5395 family integrates substantial network-interface functionality into one device. Five integrated PHYs eliminate five separate external PHY packages when each port requires 1000BASE-T connectivity. The integrated packet buffer supports local frame storage and switching operations, reducing reliance on external memory around the switching core. The device is positioned as an interface and transceiver-class network IC rather than a general-purpose processor, so its surrounding circuitry must provide the appropriate host-facing interface, clocking, power, and physical-layer network connections. Typical implementation areas include small office network switches, industrial Ethernet equipment, embedded gateways, printer and storage networking, and compact multiport Ethernet interfaces. A five-port arrangement can also serve as the central switching element in a small embedded network. These uses depend on confirming host-interface requirements, supported PHY media, electrical characteristics, package details, and operating conditions against the Broadcom BCM5395 datasheet before schematic capture. PCB implementation requires careful separation between the digital host interface and sensitive analog PHY networks. Magnetic-interface components, termination, controlled-impedance routing, ground-plane continuity, and adequate decoupling should follow the manufacturer reference layout and component guidance. Confirm the exposed-pad, thermal, and decoupling requirements from the package documentation, because those details determine the number of input and output pins and the exact footprint that must be used in the PCB library. This page consolidates the identified switching features, sourcing guidance, application context, and design considerations into a concise engineering reference. It also distinguishes confirmed BCM5395 capabilities from package, electrical, lifecycle, and pin-level details that must be confirmed from the manufacturer documentation before layout release or production qualification.
BCM5396IFBG - 16-Port Gigabit Layer 2 Switch | Broadcom
Broadcom BCM5396IFBG is a highly integrated 16-port Gigabit Ethernet Layer 2 switch with integrated SerDes in a monolithic 0.13 μm CMOS device. The verified manufacturer documentation describes a complete high-speed switch system combining a packet buffer, Media Access Controllers, address management, and a non-blocking switch controller. It supports the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x specifications, including MAC control PAUSE-frame handling, making it suitable for structured networking equipment, gateway platforms, routers, switches, and industrial Ethernet systems. The part is identified by distributors as a 16-port Layer 2 Gigabit Ethernet switch with integrated SerDes, and one distributor lists the BCM5396IFBG from $45.6230 as of 2026-10-28. The BCM5396IFBG is a Broadcom Limited interface IC with an exact package designation and pinout not included in the supplied verified data. Consequently, package dimensions, pin names, electrical limits, clocking requirements, thermal ratings, and absolute maximum ratings are recorded as unavailable rather than estimated. Its integrated SerDes architecture can reduce external switching-component count in a Layer 2 design, while the non-blocking controller and packet buffer support high-throughput Ethernet aggregation. The IEEE 802.3x PAUSE-frame support is important when downstream devices cannot accept traffic at line rate, although exact buffering and flow-control thresholds must be confirmed from the manufacturer datasheet. This product page is intended as an engineering summary, not as a substitute for the complete Broadcom data sheet. It combines verified source information, commercial availability, application context, and strict data-quality markers to distinguish documented facts from values that still require confirmation before schematic capture, PCB layout, thermal analysis, or production release. The BCM5396IFBG should therefore be evaluated as a highly integrated switching solution for Gigabit Ethernet products where port density, integrated SerDes, Layer 2 management, and non-blocking switching are the primary design requirements.
BCM5396KFBG - 16-Port Gigabit Ethernet Switch with Integrated SerDes | Broadcom
The Broadcom BCM5396KFBG is a 16-port Gigabit Ethernet switch with integrated SerDes, provided in a 256-FBGA package measuring 17 x 17 mm. It combines packet buffering, Media Access Controllers, address management, and a non-blocking switch controller in one monolithic 0.13 µm CMOS device. The device uses an SPI interface for host configuration and supports the IEEE 802.3, 802.3u, 802.3ab, and 802.3x specifications identified in the manufacturer datasheet. An Ethernet switch is a network-semiconductor device that receives Ethernet frames on multiple ports and forwards them through a shared internal switching fabric. The BCM5396 family integrates 16 Gigabit Ethernet ports with physical-layer transceiver functions, allowing a board to implement a multi-port network interface without using a separate switch controller and sixteen external SerDes devices. The switch controller and packet-buffer architecture coordinate traffic transfer among ports. The most prominent functional characteristics are the 16 Gigabit Ethernet ports, integrated SerDes, non-blocking switch operation, and integrated packet buffer. The monolithic design also includes Media Access Controllers and address management. These features make the BCM5396 suited to compact networking equipment where port density, integration, and board area matter. The SPI host interface provides a control path for configuring switch operation and managing relevant networking parameters. Broadcom's manufacturer datasheet describes the BCM5396 as a highly integrated high-speed switch solution. It is implemented in 0.13 µm CMOS, combining the MACs, packet buffer, address-management logic, and switch controller rather than relying on discrete components for those functions. It complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x specifications, including support for MAC-control PAUSE frames. Exact clock, voltage, power, and temperature limits were not available in the supplied excerpts and require confirmation in the complete datasheet. Typical applications include industrial Ethernet switches, telecom access equipment, network-interface appliances, and multi-port embedded networking systems. In these systems, the 16 integrated ports can reduce component count and PCB routing demand compared with a design built from discrete Ethernet PHYs. Its low-power operating mode, noted in distributor product information, may be useful when port activity or traffic demand is limited. The SPI interface also makes the device suitable for systems whose supervising processor must initialize or supervise the switch. The primary design consideration is package complexity. A 256-FBGA device requires a fine-pitch PCB land pattern, careful escape routing, reliable power and ground distribution, and assembly capability suitable for large ball-grid arrays. Designers should also verify clock requirements, SerDes electrical characteristics, thermal performance, reset behavior, and supported PHY or media arrangements against the complete manufacturer datasheet before releasing layout or production files. This page consolidates verified distributor listings, the Broadcom manufacturer datasheet excerpt, package information, sourcing data, and application guidance. It also distinguishes documented BCM5396 capabilities from details that still require validation, helping engineers evaluate the device without mistaking incomplete distributor metadata for a complete electrical specification set.
BCM5398KPBGG - 5-Port Gigabit Ethernet Switch | Broadcom
The Broadcom BCM5398KPBGG is a specialized five-port Gigabit Ethernet switching interface with five integrated physical-layer transceivers and an integrated packet buffer. It is intended for embedded networking equipment that requires multiple Ethernet ports, local frame switching, and a compact interface-oriented implementation. The exact package dimensions, pin count, electrical operating limits, and detailed PHY configuration are not stated in the available manufacturer or distributor information, so those characteristics should be confirmed against the original Broadcom documentation before layout or qualification work begins. The BCM5398KPBGG belongs to the Ethernet switch and network-interface hierarchy. An Ethernet switch operates at the data-link layer and forwards frames between connected ports using MAC addresses. A five-port Gigabit Ethernet switch with integrated PHYs reduces the need for separate transceiver components when the design requires copper Ethernet connections. The integrated packet buffer helps the device manage frames temporarily while forwarding traffic between ports. This part is listed as obsolete by the available datasheet index, so new production designs should confirm lifecycle strategy before committing to the device. Existing equipment can still use the BCM5398KPBGG for repair, redesign, and continuity purposes when the original package, pinout, electrical limits, and thermal requirements are retained. The manufacturer and distributor records identify the part as an interface IC, with tray packaging shown in the available listing information. Typical application areas include industrial Ethernet gateways, embedded network appliances, access equipment, printer controllers, IP terminals, and multi-port communication systems. In these systems, the switch can consolidate several 10/100/1000BASE-T connections into one device while providing local frame forwarding. The exact supported media types, autonegotiation behavior, MAC-table capacity, packet-buffer size, and PHY electrical parameters require confirmation from the original Broadcom datasheet. For a new design, use the exact Broadcom documentation to verify the package land pattern, pin assignments, power-supply sequencing, crystal or clock requirements, magnetics interface, thermal limits, and regulatory requirements. Do not infer a replacement from the base-number listing alone; suffix changes can represent different package, temperature, or qualification options. This page distinguishes verified catalog facts from fields that require engineering confirmation.
BCM5461A1KPFG - 10/100/1000BASE-T Ethernet | Broadcom
The Broadcom BCM5461A1KPFG is a single-port 10/100/1000BASE-T Ethernet controller and transceiver device for copper-based network connections. It combines support for 10 Mb/s, 100 Mb/s, and 1 Gb/s Ethernet operation in a 48-pin QFN package designated KPFG. The device is positioned for embedded networking, industrial communication, access equipment, and other systems that require a compact Gigabit Ethernet interface. An Ethernet transceiver is the physical-layer component that connects a digital network processor or communications system to twisted-pair cabling. The PHY performs signal encoding and decoding, clock recovery, link negotiation, and electrical-interface functions required by 10/100/1000BASE-T. A device combining these capabilities simplifies board design by reducing the number of separate Ethernet components and associated high-speed routing requirements. The BCM5461A1KPFG belongs to Broadcom's BCM5461 family of single-port Gigabit Ethernet devices. Its 10/100/1000BASE-T designation indicates automatic support for legacy 10 Mb/s and 100 Mb/s links as well as 1 Gb/s operation. That combination allows a product to interoperate with slower network equipment and copper cabling infrastructure while preserving a path to Gigabit throughput. The KPFG package designation identifies the physical configuration used for this ordering code. In a completed Ethernet design, the device requires the appropriate power, decoupling, clock, magnetic-component, and signal-routing support for a compliant 10/100/1000BASE-T interface. Magnetics, termination networks, and board geometry are as important to link performance as the controller itself. Typical implementation roles include industrial Ethernet gateways, embedded routers, network-interface modules, set-top equipment, printers, storage systems, and control panels. Automatic support for multiple speeds is useful in mixed environments where endpoint capabilities and switch ports may differ. The device is particularly relevant where a compact surface-mount footprint is preferred over a discrete PHY arrangement. PCB implementation should prioritize short, impedance-controlled differential traces, careful separation between transmit and receive paths, and a quiet supply network. Place input and output decoupling capacitors close to their associated power pins, keep the Ethernet magnetics close to the transceiver, and follow the manufacturer's recommended reference layout. This page organizes the confirmed device identity, sourcing information, comparison candidates, and design considerations into a practical engineering reference.
BCM5461A1KQMG - Single-Port Gigabit Ethernet Transceiver | Broadcom
Broadcom BCM5461A1KQMG is a single-port Ethernet transceiver supporting 10, 100, and 1000 Mb/s operation in a 128-pin gull-wing surface-mount package. It integrates the digital processing and analog physical-layer functions required for a copper Ethernet PHY and is intended for one-port network-interface equipment. An Ethernet transceiver, commonly called a physical-layer device or Ethernet PHY, converts digital data into electrical signaling for transmission over twisted-pair cabling. It also recovers clock and data from received signals. In the product hierarchy, BCM5461A1KQMG belongs to the Ethernet transceiver class, within network interface ICs and broader communication semiconductors. The device supports 10 Mbps, 100 Mbps, and 1000 Mbps operation as a single-port Ethernet interface. Its 128-pin rectangular gull-wing package supports surface-mount assembly, and product listings identify the package as MSL 3. The part is also described as an Ethernet transceiver with one transceiver and 128 terminals, making it suitable for compact single-port designs that require a complete copper-network physical layer. Technically, the BCM5461 family combines 10/100/1000BASE-T physical-layer capability with digital transceiver functions. This integration allows a network processor, communications processor, or application processor to connect directly to a copper Ethernet network. The exact clocking, register, power-supply, magnetic-interface, and operating-temperature details should be confirmed against the Broadcom datasheet before schematic release or PCB layout approval. Typical uses include industrial Ethernet gateways, network adapters, embedded communication equipment, access systems, and control infrastructure. The three supported data rates allow one physical network interface to interoperate with legacy 10/100 equipment as well as Gigabit Ethernet links. In designs supporting both copper and other media, the device is commonly paired with isolation or line-driver circuitry selected for the board-level topology. Layout is the main implementation concern. The 128-pin package leaves little tolerance for an improvised land pattern, so use the manufacturer package drawing and recommended reference layout. Preserve controlled-impedance routing for high-speed pairs, provide continuous return paths, decouple each supply rail locally, and place magnetic-interface components according to the datasheet reference circuit. Component placement must also account for thermal dissipation and the exact supply requirements associated with each operating mode. This product page combines the confirmed single-port Gigabit Ethernet capability, package characteristics, lifecycle information, sourcing workflow, and practical implementation guidance. It also identifies the key distinction between a documented candidate family member and a fully verified drop-in substitute, helping engineers distinguish a PCB-compatible replacement from a merely similar Ethernet transceiver.
BCM5461SA1IPF - Single-Port Gigabit Ethernet Transceiver | Broadcom
Broadcom BCM5461SA1IPF is a single-port 10/100/1000BASE-T Gigabit Ethernet copper transceiver integrated in a 100-terminal BGA package. It combines a 1 Gb/s Ethernet PHY with copper twisted-pair media support for single-port network equipment. The device is intended for applications requiring Gigabit Ethernet connectivity over standard copper cabling, including switches, routers, set-top equipment, and industrial Ethernet systems. A Gigabit Ethernet transceiver is an interface IC that converts digital Ethernet data into signals suitable for transmission over copper media and reconstructs received signals for the host digital interface. Within the network-interface hierarchy, the BCM5461SA1IPF is a physical-layer transceiver rather than a switching or routing processor. Its single-port architecture supports one copper Ethernet channel and is intended to provide a direct physical-layer interface between a network controller or switching ASIC and a 10/100/1000BASE-T network. The part is identified as an extended-temperature, single-port 10/100/1000 Ethernet device. Its 100-terminal BGA package provides a compact surface-mount footprint for multilayer PCB designs. The supplier listings classify BCM5461SA1IPF under drivers, receivers, and transceivers, reflecting its role as the active copper-port interface. Exact operating voltage, transceiver media reach, cable-length support, symbol rate, power consumption, and operating-temperature limits should be confirmed from the manufacturer datasheet before schematic sign-off. BCM5461SA1IPF is suitable for designs where a separate PHY would add component count and board area. Integrating the Ethernet physical layer close to the host interface can simplify routing and shorten high-speed traces. Designers should nevertheless preserve the datasheet reference layout because proper separation of analog PHY, digital interface, crystal, clock, and power-supply paths is essential for reliable data transmission and electromagnetic compatibility. Typical applications include single-port industrial Ethernet gateways, network adapters, router and switch line cards, set-top boxes, media bridges, and embedded communication systems. The single-port format also makes it practical for designs that need one copper uplink rather than a multi-port switching solution. A host Ethernet MAC, switch fabric, or processor with a compatible media-independent interface is still required for complete network operation. The most important design checks are power sequencing, clock quality, magnetic-component selection, controlled-impedance routing, and separation between sensitive analog and digital circuitry. Follow the manufacturer datasheet for the recommended magnetic component, external capacitors, crystal or clock network, reset requirements, exposed-pad treatment, and PCB stack-up. Confirm those details before releasing a layout or placing a production order. This page consolidates the verified package identity, interface classification, sourcing data, compatible Broadcom family candidates, and PCB-focused engineering guidance. It is designed to help engineers identify the correct Ethernet PHY and plan the mechanical, electrical, and procurement steps for a single-port Gigabit copper design.
BCM54640B0KFB Ethernet Interface IC | Broadcom
Broadcom BCM54640B0KFB is an Ethernet interface integrated circuit associated with SGMII connectivity, multi-port networking equipment, and copper Ethernet designs. The exact electrical ratings, transceiver configuration, pin assignments, package dimensions, and operating limits are not stated in the product records used for this listing, so engineers should treat those values as application-specific items to confirm in the manufacturer datasheet before releasing a PCB or qualifying production hardware. An Ethernet interface IC is a semiconductor that integrates the physical-layer transceiver and digital interface functions needed to connect processor, switch, or communications equipment to Ethernet networks. Depending on its exact configuration, this device can support combinations of copper and fiber-facing ports, serial GMII/SGMII links, media-independent interfaces, clocks, and control signals. The BCM54640 family therefore sits within the hierarchy Ethernet interface IC, Ethernet transceiver, network interface controller, interface IC, and integrated circuit. The main engineering benefit of integrating these functions is reduced component count and a compact connection between a digital Ethernet subsystem and physical media. A system designer can connect the serial interface to a network processor or switch fabric while using the transceiver portion for Ethernet line signaling. This integration can shorten board routing, reduce exposed connector and magnetics complexity, and provide a more standardized interface boundary than a collection of separate PHY and digital-interface components. The BCM54640B0KFB is identified by Broadcom and is associated with SGMII-based Ethernet connectivity. SGMII is a serial gigabit Ethernet interface commonly used between MAC and PHY devices. Its use allows high-speed data to travel over a compact differential or single-ended implementation depending on the electrical standard, reducing pin count relative to parallel GMII. Engineers must still follow the exact voltage, timing, termination, and layout requirements for the specific Broadcom interface. Typical uses include access-network equipment, Ethernet switches, routers, network interface cards, industrial Ethernet systems, and communications infrastructure where an integrated multi-port transceiver can simplify board design. The device may also be evaluated in designs requiring a standard SGMII connection between a switching ASIC or packet processor and physical-layer circuitry. Interface voltage levels and pin-level functions must be checked against the host ASIC before layout begins. A key design consideration is that Ethernet signal integrity depends on controlled impedance, short differential routes, solid return paths, and proper separation from noisy power and digital circuitry. Decoupling, clock cleanliness, magnetics or optical-interface integration, reset behavior, and thermal performance also require verification against the manufacturer documentation. Use the Broadcom BCM54640B0KFB datasheet and its reference design when assigning pins and selecting passive components. This page combines the available manufacturer and distributor product records, identifies the confirmed same-family BCM54640 naming options, and provides a structured engineering comparison and application guide. It is intended to accelerate initial component screening while directing final footprint, timing, electrical, and lifecycle decisions to the authoritative Broadcom documentation.
BCM5464SA1IRB - Quad-Port Gigabit Ethernet Transceiver | Broadcom
Broadcom BCM5464SA1IRB is a quad-port Gigabit Ethernet transceiver supporting 10/100/1000BASE-T network connections in a 354-terminal rectangular BGA package. It consolidates four Ethernet PHY channels into one device for applications requiring multiple copper-network ports without using four separate transceiver packages. The device is identified by Broadcom as an Ethernet interface IC and is listed for driver, receiver, and transceiver functions. A Gigabit Ethernet transceiver is a physical-layer interface device that converts between digital data and electrical signaling on twisted-pair copper cables. Within the network hierarchy, BCM5464SA1IRB sits below the network interface controller and above the Ethernet physical layer. Its four-port configuration is particularly useful in switches, routers, industrial gateways, access equipment, and embedded systems that need multiple 1GbE endpoints while controlling board area and component count. The primary documented feature is support for 10, 100, and 1000BASE-T operation across four ports. This compatibility allows a system to accommodate legacy 10 Mb/s and 100 Mb/s equipment as well as Gigabit Ethernet links. The 354-ball BGA arrangement supports compact, high-density integration, but its fine pitch and high terminal count require careful PCB layout, uninterrupted reference planes, and assembly processes capable of handling the package. The BCM5464SA1IRB combines four Ethernet physical channels in one package, reducing the number of discrete network-interface devices required in a multiport design. Compared with a system using four single-port transceivers, this consolidation can simplify enclosure design, reduce board area, and centralize thermal and power-supply considerations. The trade-off is a more demanding BGA layout and a device whose internal thermal and channel performance must be assessed across all four active ports. Typical applications include multiport industrial Ethernet equipment, network access points, embedded gateways, printer and scanner interfaces, video-convergence products, and compact Ethernet switches. In each case, the device can serve as the copper-facing physical-layer element while a separate Ethernet MAC or switching controller handles packet processing. Board designers should preserve the high-speed differential routing geometry required by 1000BASE-T channels and provide the decoupling and thermal conditions required by the manufacturer documentation. Layout is the principal implementation consideration for this device. Place the BGA on a multilayer PCB with a continuous reference plane beneath the device, route all differential pairs as controlled-impedance nets, and avoid stubs or test-point structures that create discontinuities. Follow the manufacturer’s reference layout, ball assignments, and layer-stack guidance exactly. Validate the completed design for insertion loss, return loss, crosstalk, and radiated emissions. This product record combines the available Broadcom identification, Ethernet capability, package information, drop-in replacement assessment, and practical PCB guidance. It also distinguishes confirmed drop-in interchangeability from merely similar Gigabit Ethernet transceivers, helping engineers avoid selecting a device that requires a different footprint or fails an existing design rule.
BCM5482A1KFB Dual-Port Gigabit Ethernet PHY | Broadcom
The Broadcom BCM5482A1KFB is a dual-port 10/100/1000BASE-T Ethernet physical-layer transceiver with integrated SerDes, supporting 10, 100, and 1000 Mb/s operation in half-duplex and full-duplex modes. The device is supplied in a 121-pin plastic ball grid array package for compact network-interface designs. An Ethernet PHY converts between a digital MAC-side interface and analog copper-cable signaling. The BCM5482A1KFB integrates two physical-layer channels, allowing one component to serve two Ethernet ports while reducing board area in IP phones, access equipment, industrial controllers, and other multiport systems. Its dual-port architecture can reduce the number of discrete PHY packages required on a board. The BCM5482A1KFB supports 10, 100, and 1000 Mb/s rates and is compatible with IEEE devices operating in half-duplex and full-duplex configurations. This broad rate support lets a product design accommodate legacy 10BASE-T and 100BASE-TX links while retaining Gigabit Ethernet capability. The integrated SerDes also connects the PHY channels to digital network processors or switching silicon. Clock timing can be adjusted to compensate for board-trace delays required by the RGMII specification. This feature is particularly useful when the PHY and MAC are separated by a routed interface or when propagation delay through a multilayer board would otherwise affect timing margins. The adjustment capability supports more practical placement of high-speed digital circuitry on space-constrained boards. Low-power operation is a central design benefit for dual-port PHYs because each active channel continuously performs line coding, signal conditioning, and cable diagnostics. The device is suited to IP phone uplinks, industrial networking equipment, customer-premises equipment, and embedded dual-Ethernet systems where package size, port density, and interface timing are important design constraints. For implementation, follow the Broadcom BCM5482 documentation for power sequencing, magnetic-component selection, termination, clock configuration, and the exact pin assignments. Preserve the recommended high-speed layout practices around the RGMII interface and place input, output, and decoupling connections according to the reference design to avoid signal-integrity degradation. This page combines the device’s dual-port Gigabit Ethernet capabilities with practical selection guidance, verified source links, interface considerations, and design guidance. It is designed to help engineers identify the correct operating conditions and board-level integration requirements before committing a BCM5482A1KFB-based Ethernet interface to production.
BCM5482A2IFBG - Dual-Port Gigabit Ethernet PHY | Broadcom
The Broadcom BCM5482A2IFBG is a dual-port 10/100/1000BASE-T Ethernet physical-layer transceiver with support for 10 Mb/s, 100 Mb/s, and 1 Gb/s data rates. The device is supplied in a 121-pin ball grid array package and is intended for dual-port Ethernet equipment requiring integrated copper-network connectivity. According to the manufacturer datasheet, BCM5482A2IFBG complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab. An Ethernet PHY is an interface IC within the Ethernet transceiver hierarchy. Its primary function is to convert digital data from a MAC or network controller into signals suitable for twisted-pair cabling, while receiving and recovering incoming signals. A physical-layer transceiver bridges the digital Ethernet controller and the analog, cable-facing network interface. The BCM5482A2IFBG supports three speed categories within one device: 10 Mb/s Ethernet, Fast Ethernet at 100 Mb/s, and Gigabit Ethernet at 1 Gb/s. The principal feature of BCM5482A2IFBG is its dual-port architecture, allowing two 10/100/1000BASE-T network connections to be implemented with one PHY package. Automatic support for 10 Mb/s, 100 Mb/s, and 1 Gb/s operation allows one Ethernet port to accommodate legacy and modern link speeds. Compliance with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab connects the device to the relevant Ethernet and 1000BASE-T physical-layer specifications. RoHS details are identified in a published comparison of this Broadcom part. The BCM5482 family combines a conventional Ethernet PHY role with integrated transceiver functionality. Each port therefore requires a suitable magnetic-interface network path, termination, and protection network in addition to normal digital connections to the Ethernet controller. The 121-pin BGA package supports compact multi-port equipment layouts, but its dense ball pitch makes PCB assembly, inspection, and rework more demanding than a leaded package. Accurate land patterns, layer-stack requirements, and assembly-process limits should be taken directly from the Broadcom package documentation. Typical uses include industrial Ethernet switches, network-interface controllers, routers, gateways, set-top equipment, and embedded systems that require two copper Ethernet links. In these systems, the device can reduce the number of separate PHY packages compared with a two-chip implementation. Its 1 Gb/s capability supports high-volume file transfer and backbone aggregation, while 100 Mb/s and 10 Mb/s support allows each port to negotiate a compatible speed with legacy equipment. Design the magnetic-interface and analog network sections away from clocks, switching regulators, and high-speed digital routing. Keep the PHY supplies, decoupling network, reference components, and clock source stable because network margin depends on clean power and low-noise timing. PCB stack-up, controlled-impedance routing, via geometry, and the manufacturer’s recommended land pattern are critical when reproducing a qualified 121-pin BGA layout. This page organizes the BCM5482A2IFBG specifications, sourcing guidance, candidate replacements, and practical Ethernet hardware considerations. It also distinguishes confirmed same-package candidates from designs that require a different PHY or require board-level revalidation before replacement.
BCM5482A2KFB - Dual-Port Gigabit Ethernet PHY | Broadcom
Broadcom BCM5482A2KFB is a dual-port 10/100/1000BASE-T Ethernet physical-layer transceiver with integrated SerDes support, supplied in a 121-pin BGA package. The device supports 10 Mb/s, 100 Mb/s, and 1 Gb/s Ethernet operation and is intended for network-interface equipment requiring copper connectivity. According to the Broadcom BCM5482 documentation, the PHY supports RGMII, SGMII, and serial SerDes MAC interfaces. These reduced-pin-count interfaces offer alternatives to the full GMII and can simplify system integration while reducing board-level interconnect requirements. An Ethernet PHY is a physical-layer transceiver that converts digital MAC data into electrical signals suitable for transmission over twisted-pair cabling, while recovering signals from a received waveform. The BCM5482A2KFB belongs to the Ethernet transceiver hierarchy: Ethernet PHY, network interface IC, interface IC, and semiconductor. Its dual-port architecture allows one device to serve two copper Ethernet connections, reducing component count in routers, switches, gateways, and embedded network appliances compared with separate single-port PHYs. The device supports 10BASE-T, 100BASE-T, and 1000BASE-T operation according to its product classification and Broadcom technical documentation. RGMII provides a parallel MAC-to-PHY data path, SGMII provides a serial gigabit-class path, and SerDes offers a reduced-width serial interface. The Broadcom documentation also identifies adjustable RGMII clock timing as a system-integration feature intended to compensate for printed-circuit-board trace delays without requiring the external delay compensation specified by the RGMII interface. The BCM5482 uses a DSP-based architecture with advanced power-management techniques for operation over existing Category 5 twisted-pair wiring. Broadcom states that the architecture complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab, providing support for 10 Mb/s, 100 Mb/s, and 1000BASE-T operation. These standards correspond to the three Ethernet rates identified for the BCM5482 family. Typical applications include multi-port routers, Ethernet switches, network appliances, digital video equipment, industrial Ethernet controllers, and embedded systems requiring two Gigabit Ethernet physical interfaces. The RGMII option is useful when the host MAC expects a parallel interface, while SGMII and SerDes can reduce PCB routing demands in high-speed designs. Interface selection should account for MAC timing, clock architecture, trace length, and signal-integrity requirements. Designers should follow the Broadcom BCM5482 datasheet for the complete ball map, recommended magnetic component, termination network, decoupling, and reference-layout details. The 121-ball footprint requires careful escape routing, and the copper medium requires an appropriate Ethernet magnetics implementation. Maintain the specified power and ground distribution because high-speed digital interfaces can couple return-path noise into adjacent circuits. This page consolidates the verified BCM5482A2KFB interface, package, rate, and environmental details with drop-in replacement guidance, comparison parameters, and application-focused design guidance. It also separates confirmed device characteristics from parameters that require confirmation against the manufacturer datasheet before schematic release or layout commitment.
BCM5482A2KFBG - Dual-Port Gigabit Ethernet PHY | Broadcom
The Broadcom BCM5482A2KFBG is a dual-port 10/100/1000BASE-T Ethernet transceiver IC packaged in a 121-ball BGA. It combines two Gigabit Ethernet physical-layer channels with full-duplex and half-duplex operation for network-interface, router, switch, and embedded communications equipment. The device uses CMOS technology and supports link rates of 10 Mb/s, 100 Mb/s, and 1 Gb/s on each port. An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into signals suitable for copper-cable transmission while managing line signaling, link negotiation, and recovery. Within the network-interface hierarchy, the BCM5482A2KFBG sits below the Ethernet MAC and above the transformer and magnetics. Integrating two PHY channels into one package reduces board area in designs that need two copper-network connections. The principal benefits of this device are its dual-port architecture, support for three Ethernet speed classes, and 121-BGA package. Each port can operate at 10 Mb/s, 100 Mb/s, or 1 Gb/s, allowing a single board design to support legacy and gigabit links. The full-duplex capability is suited to simultaneous bidirectional traffic, while half-duplex support provides compatibility with legacy network equipment. Technically, the BCM5482A2KFBG is a CMOS Ethernet transceiver rather than a general-purpose processor. Its two PHY channels provide the physical-layer interface between a digital network controller and external magnetic interface circuitry. Exact pin assignments, clock requirements, register definitions, power rails, media-unit interfaces, and electrical characteristics should be taken from the Broadcom manufacturer datasheet for the assembled board. Typical uses include dual-port routers, network switches, industrial Ethernet gateways, set-top equipment, embedded Linux systems, and network-interface cards. In each application, the PHY can support two copper links independently, reducing the number of separate Ethernet transceiver packages required on the PCB. The principal design consideration is PCB implementation. A 121-BGA device requires fine-pitch routing, controlled escape geometry, and careful power and ground distribution. Follow the manufacturer layout, decoupling, thermal, and magnetics guidance rather than inferring high-speed routing requirements from generic BGA rules. This page consolidates the verified product identity, package information, speed-class coverage, sourcing data, replacement considerations, and engineering guidance into one design reference. It also distinguishes true footprint-compatible Broadcom alternatives from functional Ethernet PHY options that require different packages, interfaces, or board layouts.
BCM5482SA1IFB - Dual-Port Gigabit Ethernet PHY | Broadcom
The Broadcom BCM5482SA1IFB is a dual-port 10/100/1000BASE-T Ethernet transceiver designed for compact network-interface equipment. It integrates two Gigabit Ethernet PHYs, driver and receiver functions, and RGMII support in a 121-pin BGA package. Its reduced-pin-count interface is intended to simplify routing, reduce PCB layer requirements, and lower system cost in space-constrained applications. An Ethernet transceiver such as the BCM5482SA1IFB belongs to the physical-layer IC category within the broader hierarchy of network-interface ICs, Ethernet controllers, and semiconductor interface devices. It converts between digital data interfaces and copper Ethernet physical channels, while supporting both 10 Mb/s, 100 Mb/s, and 1000 Mb/s operation. Integrating two ports in one package can reduce component count when equipment requires multiple network connections. Key features include a dual-port 10/100/1000BASE-T configuration, integrated full-duplex transceiver operation, and a 121-ball BGA package. The RGMII clock timing can be adjusted to compensate for PCB trace delay, reducing sensitivity to routing length and helping simplify system-level timing design. These features make the device applicable to IP phones, network terminals, access equipment, and other products requiring compact multiport Ethernet connectivity. The BCM5482SA1IFB is particularly relevant to space-constrained designs because one package provides two Gigabit Ethernet channels. Compared with using separate single-port PHYs, consolidation can simplify the bill of materials and reduce the number of routed network channels on the PCB. The RGMII timing-adjustment capability further supports practical board implementation by allowing interface timing to be tuned for propagation delay introduced by printed-circuit traces. Typical applications include dual-port IP phones, VoIP terminals, customer-premises equipment, network interface controllers, industrial Ethernet endpoints, and embedded gateways. In an IP phone, the device can connect a processor or application controller to two copper Ethernet ports while using the RGMII interface for data transfer. In a compact gateway, the same integration can conserve board area and reduce component count. Designers should confirm the required PHY features, supported RGMII modes, electrical characteristics, and thermal limits against the manufacturer datasheet before schematic release. PCB layout must follow the package ball map and recommended high-speed and power-distribution guidance. RGMII trace timing, clock routing, return paths, and decoupling should be evaluated together because interface timing margin depends on the complete interconnect. This page organizes the BCM5482SA1IFB into practical selection, application, comparison, and design-guidance sections. It highlights the part's dual-port Gigabit Ethernet role, 121-BGA footprint, and adjustable RGMII clock timing while clearly separating confirmed characteristics from parameters that require design review.
BCM5482SA2KFB - Dual-Port 10/100/1000BASE-T PHY | Broadcom
The Broadcom BCM5482SA2KFB is a dual-port 10/100/1000BASE-T Ethernet physical-layer transceiver designed for copper network connections. It supports three data rates—10 Mb/s, 100 Mb/s, and 1000 Mb/s—across two integrated ports. The exact package dimensions, pin configuration, electrical limits, and environmental ratings must be confirmed in the Broadcom manufacturer datasheet before PCB release or production use. An Ethernet physical-layer transceiver, commonly called a PHY, converts serialized digital data into electrical signaling for transmission over twisted-pair copper cables. The BCM5482SA2KFB belongs to the PHY hierarchy within Ethernet interface ICs, which connect a digital MAC or network processor to physical copper media. Supporting 10, 100, and 1000 Mb/s allows one device to serve multiple speed requirements within a dual-port design. The principal feature of the BCM5482SA2KFB is integration of two 10/100/1000BASE-T ports in one component. This can reduce the number of separate Ethernet PHY devices required in a network interface, switch, router, or industrial controller. Its multi-rate support also allows equipment to negotiate the highest common link speed supported by both connected devices rather than requiring separate interfaces for Fast Ethernet and Gigabit Ethernet. As an Ethernet interface IC, the BCM5482SA2KFB is intended to support copper-based data links used in local-area networks. Its two-port architecture is useful where board space is constrained but two independent network connections are needed. Compared with a single-port PHY arrangement, a dual-port device can simplify routing and component placement, although the final signal-integrity design still depends on the magnetic interface, connector layout, cable requirements, and impedance-controlled PCB construction. Typical applications include industrial Ethernet switches, routers, network interface controllers, embedded communication equipment, and control systems with multiple copper Ethernet ports. The 10/100/1000BASE-T capability makes the part relevant to factory automation, building controls, network appliances, test equipment, and embedded platforms that must accommodate legacy 10 Mb/s or 100 Mb/s links as well as Gigabit Ethernet connections. Use the manufacturer datasheet's pin-description and reference-circuit sections when assigning power, ground, clock, digital-interface, and analog-network signals. High-speed copper pairs require controlled impedance and careful separation from noisy digital or switching-converter paths. Component placement and magnetic-interface design should be reviewed against the manufacturer's layout guidance before production, especially when two high-speed ports share a compact board area. This product page organizes the available BCM5482SA2KFB information, identifies same-family Broadcom candidates, and provides engineering-focused selection guidance. Confirm package, pinout, clock requirements, register programming, power sequencing, environmental limits, and lifecycle status against the exact Broadcom datasheet and ordering information before committing a design to production.
BCM5488SA7IPB - Octal Gigabit Ethernet Transceiver | Broadcom
Broadcom BCM5488SA7IPB is an Ethernet transceiver device described in distributor catalogs as an eight-channel full/half-duplex 10/100/1000BASE transceiver, supplied in a 484-pin PBGA package. The device is positioned for multiport networking equipment, where one transceiver IC can support several copper Ethernet ports while providing a consolidated interface to the host processor. Its specified 1000 Mbps class operation is suitable for Gigabit Ethernet endpoints, although the exact channel organization and signal details must be confirmed from the manufacturer documentation for each production configuration. An Ethernet transceiver is an interface integrated circuit that converts between digital data and electrical signaling on twisted-pair Ethernet cables. Within the network interface hierarchy, a transceiver sits between a MAC or switching ASIC and the physical network, handling the physical-layer functions needed for 10BASE-T, 100BASE-TX, and 1000BASE-T links. The BCM5488SA7IPB therefore belongs to the broader Ethernet PHY, interface IC, networking semiconductor, and semiconductor categories rather than functioning as a general-purpose processor. The principal cataloged feature is support for full- and half-duplex 10/100/1000BASE operation across an eight-channel arrangement. A multiport device can simplify board routing and reduce the number of separate PHY packages compared with discrete single-port implementations. Distributor records also associate the component with Gigabit Ethernet transceiver functions, making it relevant to switches, routers, network appliances, industrial Ethernet equipment, and multiport Ethernet line cards. Exact interface voltage, media reach, cable-length, power, and environmental limits are not stated in the available catalog excerpts. The BCM5488SA7IPB uses an integrated-circuit architecture intended to bridge a network-switching or packet-processing ASIC with copper Ethernet physical layers. Its 484-pin PBGA provides a large, high-pin-count surface-mount footprint suitable for complex, high-speed mixed-signal circuitry. Such packages demand careful power-plane distribution, ground-return design, decoupling, and via-in-pad or fanout strategies so that high-speed differential pairs and sensitive transceiver references maintain controlled impedance and return paths. Typical deployment points include eight-port Gigabit Ethernet switches, router interfaces, network interface controllers, industrial control cabinets, and communications equipment with multiple 10/100/1000BASE ports. In these systems, the transceiver simplifies physical-layer implementation while the host ASIC handles packet processing, port arbitration, and higher-level protocol functions. Multicomponent boards should confirm cable-media support, autonegotiation behavior, register compatibility, and thermal performance before production release. The primary design consideration is that a high-pin-count PBGA must be treated as a complete RF-controlled and thermally managed layout, not as a generic digital component. Place the device according to its recommended footprint, preserve continuous supply and ground planes, decouple each supply domain at its pins, and route each Ethernet differential pair as a controlled-impedance pair. Verify magnetics or coupling components, line-side protection, isolation spacing, and return-path continuity against the applicable reference design. This product record combines cataloged device identity, packaging, sourcing information, technical context, application guidance, and a compatibility-focused comparison. Engineers should use it to identify whether the BCM5488SA7IPB belongs in the architecture, then confirm every unreleased electrical limit, pin function, register, and lifecycle decision against the current Broadcom technical documentation before schematic release or production procurement.
BCM55524SD02 Network Controller SoC | Broadcom
The Broadcom BCM55524SD02 is a BCM55524 chipset packaged as a system-on-chip (SoC) integrated circuit for network controller and processor applications. The part is identified in manufacturer-related channel listings under the exact ordering code BCM55524SD02, with Broadcom classified as a network controller and processor IC supplier. Its physical package, pin arrangement, electrical ratings, and operating limits are not stated in the available product records. A system-on-chip is an integrated circuit that combines multiple functional blocks within one semiconductor device. The SoC category sits within integrated circuits and can include processor, controller, memory-interface, communications, and peripheral functions. Unlike a discrete controller surrounded by numerous external devices, an SoC centralizes those functions into a single package, which can simplify board partitioning and reduce the number of interconnects required by a system. The BCM55524SD02 is specifically associated with the BCM55524 chipset identity. That chipset name distinguishes it from unrelated Broadcom connectivity processors and is the primary basis for locating an appropriate datasheet or technical reference. Because the accessible records do not enumerate CPU type, memory configuration, interface set, clocking, I/O voltage, or thermal limits, engineers should not infer those capabilities from the Broadcom product name alone. Broadcom network-controller SoCs are commonly evaluated for connected equipment that requires local packet handling, peripheral connectivity, or system-level control. A controller implementation may use the SoC alongside Ethernet PHYs, memory, flash storage, clock sources, power regulators, and isolation or protection components. The exact companion devices must be selected from the controller's documented interface requirements rather than from generic protocol similarity. The same-family BCM47083SL01 appears in the XAIPART product catalog and can be considered as an adjacent Broadcom connectivity-controller option during architecture reviews. It is not listed here as a drop-in substitute because no pin-level or parametric cross-reference establishes package, pinout, firmware, memory, or interface compatibility with BCM55524SD02. A sound design process starts with the exact Broadcom technical documentation for BCM55524SD02, then maps power, clocks, boot media, memory interfaces, networking interfaces, and exposed I/O onto the PCB. Verify the package drawing and pin table before layout, and confirm schematic signal levels, reset behavior, boot configuration, and thermal conditions with the manufacturer before release. This product record combines exact-part identification, current channel availability references, related Broadcom ecosystem options, and a verification checklist for design-in decisions. It distinguishes the BCM55524SD02 from unsupported replacements and helps engineers identify the technical documents, interfaces, and qualification details that must be reviewed before schematic approval or PCB release.