Interface ICs
ژێرپۆلەکان
بەرهەمەکان (5,100+)
BD37067FV-ME2 - 6-Ch Audio Processor | ROHM Semiconductor
The ROHM Semiconductor BD37067FV-ME2 is a 6-channel car-audio sound processor with a 7 V to 9.5 V supply range, I2C control, and a 40-SSOP-B surface-mount package. It combines a six-stereo-source input selector, signal-level adjustment, an ADC output stage, a second-order post-filter for out-of-band noise reduction, a six-channel volume circuit, and TDMA noise-reduction support. A sound processor is an audio-specific signal-control IC that sits between source-selection circuitry and downstream audio conversion or amplification. It is part of the broader hierarchy of semiconductor devices for audio signal management, where input routing, level control, filtering, and digital conversion must operate together. The BD37067FV-ME2 is intended primarily for automotive audio systems, although its functional block set also suits compact audio equipment. The defining feature is the integrated six-channel architecture. Instead of implementing every stereo-source input and volume path as discrete circuitry, the device provides a six-stereo-source selector and a six-channel volume circuit in one IC. The second-order post-filter reduces out-of-band noise after level adjustment, while the TDMA noise-reduction functions simplify implementation of noise control in suitable digital-audio systems. Control is handled through an I2C bus, supporting integration with a host controller in vehicle audio, mini-component, and micro-component equipment. The manufacturer datasheet also identifies support for controlling a 5 V I2C-bus controller. This interface-oriented control method helps reduce external control lines and allows source, volume, and filter-related settings to be managed digitally by the surrounding system. Typical deployments include factory-installed car-audio head units, navigation and communication audio systems, compact stereo equipment, and other multi-source audio products. Six-channel routing is particularly useful when several stereo sources must share a common set of downstream outputs while maintaining independent source selection and level control. The integrated post-filter also reduces the need for additional external filtering when out-of-band noise control is required. PCB design should preserve short analog signal paths and maintain suitable ground distribution around the 40-pin SSOP-B device. Because the part coordinates input selection, filtering, ADC output, and volume control, verify the complete signal chain against the manufacturer application circuit before finalizing component values and layout. Confirm I2C addresses, control levels, external-component requirements, and decoupling directly from the manufacturer datasheet. This product page consolidates the device function, verified operating details, application guidance, package constraints, and replacement limitations into an engineering-focused selection resource. It also distinguishes true pin-compatible substitution requirements from merely similar audio ICs, helping designers avoid adopting a component with a different package, pinout, or control architecture.
BD37069FV-ME2 - 6-Channel Car Audio Processor | ROHM
The ROHM Semiconductor BD37069FV-ME2 is a dedicated car-audio sound processor with six stereo input channels, a six-channel volume circuit, and a built-in second-order post filter. It operates from a 7 V to 9.5 V supply, supports I2C control, and uses a 40-pin SSOP-B package. The device provides signal-level adjustment for ADC interfacing and includes a high-voltage output function capable of reaching 5.2 VRMS maximum output. An automotive audio processor is an application-specific integrated circuit that manages multiple audio signal paths before conversion, distribution, or amplification. The BD37069FV-ME2 belongs to the broader audio-processing IC category and is designed to simplify head-unit design by combining input selection, level control, and filtering in one device. Its architecture helps reduce the number of discrete analog components required around an ADC and subsequent audio signal chain. The six-channel input selector allows six stereo sources to be connected to the processor, making the device suitable for a head unit that must handle radio, external media, navigation, and other source signals. The six-channel volume circuit provides independent or coordinated level adjustment for stereo channels, while the built-in second-order post filter reduces out-of-band noise before the selected signal reaches the ADC interface. The high-voltage function supports a maximum output of 5.2 VRMS, which is useful where the downstream audio path requires a larger signal swing. The BD37069FV-ME2 uses an I2C interface for control and configuration, allowing an automotive audio host processor or system controller to adjust operating parameters without a large parallel-control footprint. Its 7 V to 9.5 V operating range is consistent with automotive electronic systems, although final supply tolerance, transient protection, and ground requirements must be checked against the complete system design. The 40-SSOP-B package is intended for surface-mount automotive electronics assemblies. Typical uses include car-audio head units, automotive infotainment systems, radio and navigation audio front ends, external-accessory input modules, and multi-source vehicle audio systems. The processor is most useful when the design needs centralized stereo-source selection and adjustable signal conditioning before ADC conversion. It is also appropriate where a fixed analog network would be difficult to tune and where software-controlled I2C configuration is preferred. For PCB design, place the decoupling capacitors close to the supply and ground pins, route audio inputs away from switching nodes and digital control signals, and verify the external input and output network against the manufacturer’s recommended application circuit. Pay particular attention to channel mapping, signal amplitude, filter configuration, and the relationship between the selected source and the ADC input range. The manufacturer datasheet and application information should define the pin connections and test conditions. This product page combines the manufacturer’s functional description with distributor package and interface information, practical application guidance, and a comparison framework for engineers evaluating equivalent sound processors. Use the documented operating limits and pin descriptions as the design authority rather than treating the summarized application guidance as a substitute for the complete manufacturer datasheet.
BD37512FS-E2 - 4-Channel Audio Tone Processor | ROHM Semiconductor
ROHM Semiconductor BD37512FS-E2 is a 4-channel audio tone processor with a built-in 2-band equalizer, optimized for car-audio systems that require multiple analog audio inputs, independent channel fader control, bass adjustment, and treble adjustment without a separate equalizer IC. The device operates from a 7 V to 9.5 V supply and is controlled through an I2C bus. Its integrated 2-band equalizer, 3 input selectors, 4-channel independent volume and fader control, and four-channel stereo input selector make it suitable for centralized head-unit, radio, and automotive infotainment audio routing. The product belongs to the sound-processor IC category, a functional extension of the broader audio signal-chain hierarchy. In a vehicle audio system, an analog source selector routes radio, media, navigation, or external audio signals into a common processing block. The processor then applies gain and tone adjustments before sending the four processed channels toward amplifiers or line-output stages. Integrating the equalizer and fader functions into one IC reduces the number of separate analog control components and provides a common software-control interface. Key features include three audio input selectors, four-channel independent volume and fader control, input-gain control, and an internal 2-band equalizer for bass and treble adjustment. The equalizer is implemented internally, avoiding external passive tone networks while preserving analog audio-path flexibility. The I2C interface enables software control of the processor functions and supports integration with automotive head-unit or audio-control designs. The BD37512FS-E2 is identified in the manufacturer documentation as a sound processor for car audio and is packaged in a 20-SSOP-A package. The 7 V to 9.5 V operating range is appropriate for conventional automotive audio subsystems that provide a regulated supply within that range. Its four-channel organization supports stereo or multi-channel processing requirements where separate channel attenuation and routing are useful. Typical applications include automotive head units, car-radio systems, navigation-audio processors, rear-seat entertainment systems, and other vehicle infotainment platforms. It can also fit industrial or commercial audio panels requiring centralized input selection, gain control, tone adjustment, and software-controlled fader management. The processor should be positioned after source selection and before power amplifiers or line-output circuitry. Designers should verify the exact pin assignments, electrical limits, control-register map, and recommended application circuit in the manufacturer datasheet before layout. Decoupling, analog-ground routing, and protection of the audio inputs are especially important in automotive environments. Use the Request a Quote form on this page for current commercial availability, lead time, and order handling.
BD37514FS-E2 4-Channel I2C Audio Processor | ROHM
ROHM Semiconductor BD37514FS-E2 is a four-channel audio tone processor with a built-in two-band equalizer, 7 V to 9.5 V analog supply range, I2C control, and a 20-pin SSOP-A package. It supports operating frequencies up to 0.4 MHz and is designed to reduce switching noise during input gain, mute, main volume, fader volume, bass, treble, and loudness adjustments. An audio tone processor is a type of analog signal-conditioning IC. Within the broader hierarchy of integrated circuits, it belongs to the audio processor and interface IC category, where it sits between source-selection circuitry and downstream amplifiers or loudspeakers. Its primary role is to combine input routing, level control, tone adjustment, and mute functions while limiting audible clicks and pops caused by abrupt switched-capacitor transitions. Key features include one differential input selector, three single-ended input selectors, and built-in ground-isolation amplifier inputs for external stereo signals. The advanced switch circuit applies controlled transitions to volume and tone functions, reducing switching noise at every adjustment step. The two-band equalizer provides bass and treble adjustment, while the integrated input-gain and mute controls support compact portable-audio signal chains. The BD37514FS-E2 uses a 7 V to 9.5 V supply architecture typical of analog audio equipment. Its 0.4 MHz operating capability is suitable for processing audio signals within the human-audible range, while the I2C interface allows a host controller to adjust tone, volume, fader, mute, and input-selection settings. The 20-pin SSOP-A package provides a surface-mount footprint for consumer audio boards. Typical uses include portable-stereo systems, compact radios, mini-audio systems, car-audio interface boards, and consumer electronics with several external audio inputs. The ground-isolation inputs are useful when the source and processor do not share an ideal common ground, while the selector architecture supports switching among stereo and single-ended sources. Designers should follow the manufacturer pin-description and typical-application circuits when assigning control pins and external components. Power and signal-ground paths should be kept compact, and I2C pull-up placement must be checked against the bus topology. Because ROHM marks the family as not recommended for new designs, it is best suited to maintaining established equipment rather than starting an unrelated new platform. This page consolidates the manufacturer feature set, package and interface details, sourcing guidance, application fit, and design cautions into an engineering-focused reference. It also distinguishes confirmed drop-in replacements from devices that merely perform a similar audio-processing function.
BD37522FS-E2 - 2-Band I2C Audio Processor | ROHM
ROHM BD37522FS-E2 is an analog sound processor with a built-in 2-band equalizer, a 7 V to 9.5 V supply range, I2C control, three audio input selectors, and independent volume and fader control for four channels. The device is offered in a 24-pin SSOP-A package for car-audio and related multi-source audio systems. An audio sound processor is an analog signal-conditioning IC placed between audio sources and an amplifier or speaker system. It manages source selection, gain, volume, fader level, tone, and loudness functions. Within the broader semiconductor hierarchy, the BD37522FS-E2 belongs to the audio processor category and ultimately to integrated audio signal-processing circuitry for automotive infotainment and compact consumer audio equipment. The integrated 2-band equalizer adjusts bass and treble without external equalization components. Three input selectors allow multiple source signals to be routed through one processing chain. Four-channel independent volume and fader control supports balanced multi-zone audio distribution, while main volume, input-gain, and loudness functions provide additional system-level control. The I2C interface enables a host controller to configure the sound processor instead of relying entirely on mechanical controls. The target part operates from 7 V to 9.5 V, making it suitable for systems using an automotive-like low-voltage supply rail. Its analog audio processing architecture consolidates functions that would otherwise require multiple external ICs or discrete networks. Integration reduces the number of signal-path components, but it does not increase the output power available to speakers; a suitable audio amplifier remains required after the signal-processing stage. Typical uses include car-audio head units, multi-zone vehicle cabin audio, radio navigation systems, portable audio products, and other installations that need independent level control for several listening areas. The internal equalizer is particularly useful where board space is constrained or tonal adjustment must be available through a digital control system. For layout, place the device close to the audio input and output routing components, and follow the manufacturer pin-description table when assigning tracks. Keep analog signal paths away from switching nodes and high-current return paths. Confirm decoupling requirements, supported control addresses, and the applicable interface timing in the manufacturer datasheet before finalizing the PCB. This product summary consolidates the manufacturer product information, functional architecture, sourcing guidance, and practical integration considerations for engineers evaluating the BD37522FS-E2 in analog multi-source audio systems.
BD37524FS-E2 - 3-Band Equalizer Audio Processor | ROHM
ROHM Semiconductor BD37524FS-E2 is a car-audio sound processor with a built-in three-band equalizer, five-channel stereo input selector, and I2C control interface. It operates from a 7.0 V to 9.5 V power supply, accepts control signals through a 3.3 V or 5 V I2C bus, and is packaged in a 24-SSOP-A package. Typical no-signal circuit current is 38 mA, making it intended for vehicle audio systems with a stable 12 V-derived supply. A sound processor is an audio signal-chain IC that applies level, tonal, and channel-control functions before power amplification. The BD37524FS-E2 combines source selection, input gain, main volume, loudness compensation, five-channel fader control, subwoofer filtering, and level metering in one device. Its internal equalizer supports bass, midrange, and treble adjustment, reducing the need for external tone-control components and simplifying the control software used by car-audio systems. The key acoustic performance specifications include total harmonic distortion of 0.001% for the front and rear channels and 0.002% for the subwoofer output. Typical input-to-output crosstalk between selectors is -100 dB, while the maximum input is 2.3 Vrms. These figures suit head-unit and signal-path designs where low distortion, low channel leakage, and consistent source switching are important. The parametric equalizer can also be adjusted without external passive components. Internally, the device uses an advanced switching circuit intended to reduce switching noise while changing sources or control states. The five-channel input selector accepts stereo sources and distributes the selected audio to the relevant output paths. A low-pass filter supports subwoofer output, and a level-meter output provides a control signal for monitoring or system management. The I2C interface allows a host controller to configure source selection, gain, volume, equalizer, loudness, fader, and related functions. Typical applications include car-audio head units, automotive multimedia systems, source-selection units, and aftermarket sound controllers. The integrated three-band equalizer is particularly useful where the enclosure, speaker positions, or cabin acoustics require tonal adjustment. The dedicated subwoofer low-pass path can simplify crossover implementation when the processor sits ahead of the external power amplifiers. When designing the power and signal path, maintain the specified 7.0 V to 9.5 V operating range and use the pin-description and application-circuit tables in the ROHM datasheet for decoupling, I2C pull-up, and output connections. Because the BD37524FS-E2 is an audio processor rather than a power amplifier, its outputs still require appropriately rated external amplifier stages to drive speakers. This product page combines the manufacturer’s feature description, electrical characteristics, package information, ordering guidance, and drop-in compatibility assessment. It also organizes the component by function so engineers can evaluate the processor for automotive audio, source switching, tone control, subwoofer filtering, and consumer-audio signal-chain applications.
BD37531FV-E2 - 5-Channel Audio Tone Processor | ROHM
ROHM Semiconductor BD37531FV-E2 is a 5-channel car-audio sound processor with a built-in three-band equalizer, a 7 V to 9.5 V supply range, and an I2C control interface. It is packaged in a 28-pin SSOP and integrates input-gain control, main volume, loudness, fader volume, bass, midrange, treble, mute, and a subwoofer output. An audio tone processor is an analog signal-chain IC that controls sound characteristics between audio sources and power amplifiers. Within the product hierarchy, it belongs to audio processing, then audio signal conditioning, then integrated circuits. Instead of amplifying speaker currents directly, the BD37531FV-E2 selects and shapes voltage-level audio signals, reducing the number of discrete volume, equalizer, and routing elements required in a car-audio head unit. Its three-band parametric equalizer adjusts bass, middle, and treble response without external equalizer components. The differential input selector can combine single-ended and differential sources, while the ground-isolation amplifier inputs support external stereo signals. Reduced switching noise in the input-gain, mute, volume, fader, and equalizer paths helps prevent control transitions from producing audible disturbances. The five-channel architecture supports a main audio path, front and rear fader outputs, and a subwoofer output in a compact implementation. The dedicated subwoofer output saves board space by integrating the associated signal path, while common control software support simplifies development of compatible audio systems. Operation from 7 V to 9.5 V aligns the IC with conventional automotive audio-system supply conditions. Typical applications include car-audio head units, automotive source units, multimedia systems, and aftermarket radio units. The device is especially useful when a design needs centralized input selection, volume management, loudness compensation, and three-band tone shaping while minimizing external analog components. Designers should follow the manufacturer pin-description table when assigning PCB tracks and preserve the recommended input and output network values. Decoupling should be placed close to the supply pins, and control-bus layout should minimize switching noise coupling into the audio paths. Confirm the exact SSOP footprint and pin functions against the manufacturer datasheet before releasing artwork.
BD37534FV-E2 3-Band Audio Equalizer | ROHM Semiconductor
The ROHM Semiconductor BD37534FV-E2 is a two-channel sound processor with a built-in three-band equalizer, supplied in a 28-SSOP-B surface-mount package. It is designed for car-audio signal processing and operates from a 7 V to 9.5 V supply. The device provides input selection, input-gain control, main volume, loudness, a five-channel fader volume function, a low-pass filter for subwoofer processing, and mixing input support. A sound processor is an audio signal-conditioning integrated circuit that adjusts amplitude and frequency-domain characteristics between audio sources and an amplifier or speaker system. The BD37534FV family belongs to the broader analog audio-processing category, combining source switching, volume management, tone shaping, loudness compensation, and subwoofer filtering in one integrated circuit. Its integrated three-band equalizer allows bass, middle, and treble adjustment without external equalizer components, helping reduce board size in compact audio systems. The equalizer divides the audio signal into bass, middle, and treble regions for tone adjustment. The manufacturer identifies the BD37534FV family as supporting common control software, which can simplify system integration when the same software ecosystem is used across related products. The built-in subwoofer path includes low-pass filtering and mixing functionality, making the device relevant to automotive head units, in-dash audio systems, compact stereo systems, and other multi-zone audio products. The BD37534FV-E2 uses an I2C control interface and is identified as an automotive-grade, two-channel audio tone processor. Its operating-temperature range is -40°C to 85°C, while its supply-voltage range is 7 V to 9.5 V. The 28-SSOP-B package is a surface-mount format measuring 0.220 inches, or 5.60 mm, in width according to the distributor specification record. The part is presented by the manufacturer as a car-audio sound processor rather than as a power amplifier, so its signal-processing function should not be confused with output-stage power capability. When designing around this device, the power supply, I2C control lines, analog input routing, and output connections should be planned together. Decoupling should follow the connection recommendations in the manufacturer datasheet, and the analog signal path should be kept away from noisy switching or high-current power circuitry. The equalizer and volume functions are especially useful where a compact panel requires integrated bass, middle, treble, loudness, and subwoofer control without a separate network of external active filters. This page combines the manufacturer product description, distributor specifications, package information, operating limits, and application-oriented guidance. It also identifies the verified drop-in alternative that can be evaluated without changing the PCB footprint and highlights which detailed electrical and pin-level characteristics still require confirmation from the manufacturer datasheet before a production release.
BD37541FS-E2 - 3-Band Audio Processor | ROHM Semiconductor
ROHM Semiconductor BD37541FS-E2 is an analog car-audio sound processor with a built-in three-band equalizer, five-channel mixing capability, I2C control, and a 32-SSOP-A package. Its supported supply range is 7 V to 9.5 V, making it suited to conventional automotive audio systems operating from a 12 V battery through an appropriate regulator. A sound processor is an analog audio integrated circuit that accepts multiple audio inputs and provides input selection, gain control, volume control, tone shaping, mixing, and fader functions before the signal reaches an audio power amplifier. Within the broader electronics hierarchy, the BD37541FS-E2 belongs to the sound-processor family, then to analog audio-processing ICs, audio signal-chain ICs, and ultimately semiconductor devices. The principal system feature is the integrated three-band equalizer. ROHM describes parametric equalization that can be adjusted without external equalization components. Separate bass, midrange, and treble controls give a vehicle audio designer a practical way to shape the tonal balance of radio, CD, auxiliary, or other line-level sources. The built-in subwoofer output also reduces the external circuitry needed to develop a compact multi-channel car-audio system. Beyond equalization, the device includes a stereo input selector with single-ended and ground-isolated input capability, input-gain control, main volume, loudness, five-channel fader volume, and mixing input. The BD37541FS-E2 uses I2C control, which allows a host controller to adjust the selected audio-processing functions and reduces the number of external mechanical controls required in a finished audio system. Typical applications include factory-fit car head units, automotive infotainment systems, compact multimedia systems, auxiliary-input modules, and powered speaker systems requiring centralized source selection and tone shaping. Because this device performs analog volume, gain, and equalization functions rather than generating high-power speaker drive, it should be paired with one or more external audio power amplifiers sized for the speaker impedance and required output power. When designing a circuit around the BD37541FS-E2, preserve adequate analog grounding, route audio traces away from switching nodes and high-current power paths, and decouple the supply close to the device. Confirm the pin assignments and application circuit in the manufacturer datasheet before assigning traces because the public product result does not expose a complete verified pin description table. This page combines the exact manufacturer and distributor facts for BD37541FS-E2 with practical guidance on equalization, signal-chain placement, I2C control, PCB layout, and drop-in replacement qualification. It also distinguishes documented functions from parameters that require confirmation from the manufacturer datasheet before a new design is released.
BD37542FS-E2 - 3-Band Audio Tone Processor | ROHM
The ROHM Semiconductor BD37542FS-E2 is a three-channel audio tone processor with a built-in three-band equalizer, I2C control, and support for bass, midrange, and treble adjustment. Designed for compact audio systems, it operates from a 7 V to 9.5 V supply and is offered in a 32-pin SSOP-A package. Its equalization functions do not require external equalizer components. An audio tone processor is a functional block within the broader audio-signal-chain hierarchy. It receives one or more analog audio channels, applies adjustable frequency-dependent gain, and provides shaped outputs for loudspeakers, amplifiers, or downstream audio devices. In the ROHM BD37542FS series, the integrated bass, mid, and treble equalizer supports repeatable tone adjustment with fewer external components and less circuit-board area than a conventional passive or active equalizer. The principal features include a built-in three-band equalizer, three-channel processing, I2C bus control, parametric tone adjustment without external components, and a dedicated subwoofer output function. The common control software identified by ROHM supports the BD37542FS family and is intended to improve development efficiency across related audio-system designs. The three-channel structure permits independent processing of multiple audio paths when the associated circuit configuration is designed for that use. The BD37542FS-E2 belongs to the SSOP-A surface-mount package family, which supports compact consumer-audio hardware. Its 32-pin interface provides the connections required for power, analog signal paths, equalizer functions, and digital control. Because the exact pin assignments are not stated on the product-page listing, board designers should use the pin-description table in the manufacturer datasheet when assigning tracks, especially for I2C communication and the subwoofer output. Typical applications include compact stereo and multimedia audio products, amplified speakers, karaoke equipment, home-audio systems, and sound-processing modules where user-adjustable bass, midrange, and treble are valuable. The integrated equalizer can shorten analog filter design time, while the subwoofer output supports space-saving system architectures without adding a separate equalizer stage. When laying out a design, treat the I2C interface and analog audio paths as separate functional areas to minimize digital coupling into sensitive signals. Confirm the supported supply range, external component requirements, control-register implementation, and output-loading conditions in the manufacturer datasheet before releasing production hardware. This page organizes the verified product identity, package information, functional features, application guidance, design cautions, and sourcing questions for BD37542FS-E2. It also distinguishes documented capabilities from details that require direct verification against the ROHM datasheet, helping engineers plan sourcing, schematic design, and PCB implementation more efficiently.
BD3806AFS-E2 - 22-Pin Audio Processor | ROHM Semiconductor
The ROHM Semiconductor BD3806AFS-E2 is an audio processor IC classified as an audio-channel and audio-special-purpose device. It is supplied in a 22-pin Small Outline Package and is positioned for medium-power linear and switching applications. The -E2 ordering code identifies the specific ROHM ordering variant offered by authorized distribution channels. An audio processor is a functional category of semiconductor that sits within the broader integrated-circuit hierarchy and performs signal-conditioning, control, or channel-processing functions inside audio equipment. Unlike a discrete transistor stage, an integrated audio processor combines multiple internal functions into one package and communicates with the surrounding system through defined input, output, power, ground, and control pins. The BD3806AFS-E2 is intended for designs where a dedicated 22-pin SOP audio-channel solution is preferred over a discrete implementation. Its 22-pin package provides a defined mixed-signal integration level, while the medium-power linear and switching application positioning makes it relevant to audio subsystems that combine signal-path processing with power-management or drive-control functions. The compact surface-mount footprint also supports space-conscious consumer and industrial audio boards. BD3806AFS-E2 belongs to the ROHM Semiconductor BD3806A device family. Distributor technical listings classify it as an audio processor with 22 SOP leads, and current listings indicate continued market availability. The same family designation allows engineers to use the device as a controlled platform while confirming detailed electrical limits, timing, and internal block behavior against the current manufacturer datasheet before layout release. Typical implementation areas include audio channel control, compact audio amplifier subsystems, multimedia equipment, and powered speaker modules. In these systems, the device can serve as the central active element that receives analog or control signals and coordinates the surrounding audio path. Its application positioning is appropriate when designers need a consolidated 22-pin solution instead of a larger controller with unused functions. A key design consideration is to validate the exact pin assignment and power sequencing against the manufacturer datasheet before committing copper. Because this part is a specialized audio processor rather than a generic regulator, correct decoupling, input impedance, output loading, and thermal layout depend on the configured operating mode. The 22-pin SOP footprint must also be checked against the PCB land pattern and soldering process used in the target production line. This page brings together the verified ordering information, package classification, application positioning, sourcing workflow, and practical design guidance for engineers evaluating the BD3806AFS-E2. It also distinguishes genuine pin-compatible substitutions from devices that merely perform a similar audio-processing function, helping prevent unnecessary PCB respins during component qualification.
BD3808FS-E2 Audio Processor IC | ROHM Semiconductor
ROHM Semiconductor BD3808FS-E2 is an audio-special-purpose integrated circuit classified by DigiKey as an Audio Channel device and by other distributor listings as an audio processor. The supplied product information identifies a 22SOP package and associates the device with medium-power linear and switching applications. These verified facts place the BD3808FS-E2 in the broader category of audio processing ICs, where dedicated circuitry manages audio signal paths or associated control functions within consumer and industrial audio equipment. An audio processor is a specialized application-specific semiconductor. Unlike a general-purpose logic IC, it is designed around audio-channel requirements, including signal handling, channel control, or functions used to implement an audio system. The BD3808FS-E2 belongs to this audio-special-purpose IC hierarchy, which sits within integrated circuits and ultimately within the semiconductor component category. Its 22SOP package provides the physical interface used to connect the device on a printed circuit board. The verified distributor records distinguish the exact BD3808FS-E2 ordering code from the broader BD3808FS family listing. DigiKey identifies BD3808FS-E2 as an Audio Channel part, while marketplace records describe it as an IC audio processor in a 22SOP package. A distributor description also associates it with medium-power linear and switching applications. These classifications suggest that engineers should review the manufacturer datasheet for the exact channel architecture, electrical limits, external component requirements, and supported signal topology before releasing a production design. From a sourcing perspective, the BD3808FS-E2 is listed across DigiKey, Octopart, and multiple distributor or catalog channels. The verified search results report availability or comparison coverage, but they do not provide numeric pricing, stock quantities, operating-temperature limits, supply-voltage limits, output-current ratings, gain, distortion, frequency response, pin assignments, or package dimensions. Consequently, those electrical and mechanical parameters cannot be safely inferred from distributor category labels and must be confirmed in the manufacturer documentation. Typical design investigation for this device would focus on medium-power audio systems, signal routing, channel management, and mixed linear or switching signal-chain implementations. Whether it is suitable for a particular headphone, speaker, receiver, or auxiliary audio board depends on its documented supply range, channel count, control interface, and electrical performance. Engineers should also verify footprint compatibility, exposed or non-exposed pad details, pin multiplexing, and recommended application circuitry rather than relying only on the 22SOP package name. The main purchasing risk is incomplete verification: the supplied data does not establish lifecycle status, automotive qualification, RoHS or REACH declarations, exact package drawing, or a manufacturer-hosted datasheet URL. Samples and lot traceability should therefore be obtained before substitution. This page distinguishes verified distributor facts from unknown technical fields and avoids presenting estimated electrical ratings as if they were manufacturer specifications. This page adds engineering-focused value by mapping the verified 22SOP package and audio-processor classification to likely design checks, documenting all available source links, and identifying the exact data still required for footprint validation, schematic review, sourcing, and production release. It also explains why an apparently similar BD3808FS order code should not be assumed to be a drop-in alternative without package and pin-level verification.
BD3809FS - Audio Channel Processor | ROHM Semiconductor
ROHM Semiconductor BD3809FS is an audio-channel integrated circuit identified by distributor records as an audio processor in a 22SOP package. The available catalog information describes the device for medium-power linear and switching applications, while the primary distributor listing classifies it under Audio Special Purpose and Audio Channel. These verified identifiers establish the component family and form factor, but the supplied source excerpts do not include a complete manufacturer datasheet parameter table. An audio-channel processor is an application-specific integrated circuit used to process, control, or route audio signals within an audio subsystem. It belongs to the broader hierarchy of audio ICs, analog and mixed-signal semiconductors, and signal-processing integrated circuits. Compared with a general-purpose operational amplifier, an application-specific audio processor may incorporate multiple functions, but the exact internal blocks and signal paths of BD3809FS cannot be confirmed from the supplied excerpts. The verified package identifier is 22SOP. That package provides 22 physical lead positions, but the supplied data does not include a pinout, pin names, exposed-pad information, dimensions, or pin-to-pin replacement cross-reference. The catalogs also identify BD3809FS-E2 as an ordering designation associated with the same device family. Its electrical details, marking code, temperature range, and ordering-code differences require confirmation from the manufacturer datasheet. BD3809FS is associated with audio-channel applications and medium-power linear and switching application descriptions. These descriptions make it relevant to audio equipment, signal-conditioning circuits, and communication equipment where an audio-channel IC is required. However, verified operating voltage, input and output signal range, channel bandwidth, gain, distortion, channel count, control interface, and output-drive specifications are not included in the supplied source data and should not be inferred from the product type alone. Because the available evidence is distributor-oriented rather than a complete technical datasheet, engineers should verify pin functions, supply requirements, timing, absolute maximum ratings, decoupling recommendations, and application circuitry before committing to a design. A replacement should be selected only after confirming the exact 22SOP footprint, pin assignment, control protocol, electrical limits, and signal performance. This page consolidates the verified BD3809FS identity, package, category, distributor availability references, replacement-search evidence, and engineering-selection cautions. It separates confirmed catalog facts from unavailable technical parameters and provides a practical verification path for schematic capture, PCB layout, sourcing, and component-risk review.
BD3811K1 - 6-Channel 5.1ch Sound Processor | ROHM
The ROHM BD3811K1 is a 6-channel 5.1ch sound processor with integrated mode selection, input selection, 6-channel volume control, gain amplification, bass, treble, and bass boost functions. The device is supplied in an 80-QFP package measuring 20 mm by 14 mm and is designed for home-theater and multichannel audio systems. A sound processor is a dedicated audio-system IC that controls routing, level, tone, and channel-mixing functions before signals reach power amplifiers and loudspeakers. The BD3811K1 belongs to the broader hierarchy of audio special-purpose ICs, audio signal processors, analog and mixed-signal semiconductors, and integrated circuits. Its 5.1ch orientation means that one front-left, front-right, center, surround-left, surround-right, and subwoofer channel can be managed from a dedicated processor. The verified manufacturer datasheet identifies the BD3811K1 and BD3818KS as 5.1ch sound processors with built-in mode and input selectors. For BD3811K1, the integrated functions include 6-channel volume, gain amplifier, bass, treble, mixing through the family architecture, and bass boost. These functions reduce the number of separate analog controls required in a home-theater receiver or powered-speaker system. The available operating-supply indication is 10 V to 14.6 V, supporting conventional internal analog rails found in multichannel audio equipment. The BD3811K1 is identified by distributors as an audio tone processor in the 80-QFP (20 x 14 mm) package. Its pinout, exact control-voltage ranges, signal-frequency limits, total harmonic distortion, noise specifications, and recommended external-component values are not included in the supplied verified dataset. Those values must be taken directly from the manufacturer datasheet before signal-path or thermal calculations are approved. Typical uses include home-theater preamplifiers, 5.1ch surround-sound receivers, powered multimedia speakers, and analog multichannel source systems. The integrated bass, treble, volume, gain, and bass-boost blocks are particularly useful where a shared system-level tone controller is preferable to discrete analog networks. The input and mode selectors can also simplify source routing, although the exact supported modes and input count require confirmation from the datasheet. When designing around the BD3811K1, treat the audio paths, control inputs, supply rails, and ground returns as an analog system rather than as generic digital logic. Keep input and output routing away from switching supplies and high-current amplifier outputs, provide local supply bypassing according to the manufacturer application circuit, and verify the PCB footprint against the 80-QFP drawing before release. This page consolidates the verified distributor listings, manufacturer-hosted PDF, package information, supply-voltage indication, pricing signal, and practical selection guidance for BD3811K1. It also distinguishes confirmed data from parameters that still require verification from the official datasheet, reducing the risk of designing from an incomplete substitute listing.
BD3812F-E2 - 2-Channel Audio Volume Controller | ROHM
The ROHM Semiconductor BD3812F-E2 is a 2-channel electronic audio volume controller with 1.2 uVrms residual noise, a 131 dB dynamic range under the IHF-A weighting condition, and independent channel attenuation from 0 dB to -103 dB. The device also provides MUTE operation in 1 dB steps and uses two-line serial control. It is supplied in a 14-pin SOIC package. An electronic volume controller is an audio signal processor that adjusts the level of one or more audio channels through a control interface rather than a mechanical potentiometer. In the product hierarchy, it belongs to the broader class of audio special-purpose ICs, which sit between analog signal-generation blocks and power amplifiers. The BD3812F-E2 is designed to preserve audio signal quality while providing repeatable, software-controlled attenuation for multi-channel audio systems. The BD3812F-E2 supports independent control of two channels over a 103 dB attenuation range. Its mute function changes the level in 1 dB steps, making it suitable for product designs that need fine attenuation control, channel balancing, or user-selected volume settings. When combined with any of the BD3811K1, BD3813KS, BD3814FV, or BD3815KS family members, as specified by ROHM, the common bus supports up to eight channels. The common-bus architecture can also control as many as four chips at the same time. The maximum output voltage is 4.2 Vrms under the stated conditions of VCC = 7 V, VEE = -7 V, and RL = 10 kOhm. This output capability, combined with a residual-noise specification of 1.2 uVrms, supports low-noise audio signal paths. The two-line serial control reduces the number of control connections required compared with a parallel volume-control arrangement, which can also simplify PCB routing and microcontroller interface design. Typical uses include television and monitor audio channels, home-audio systems, active speakers, audio mixers, and multi-zone entertainment equipment. The device is particularly useful where independent left and right attenuation, common-bus expansion, mute control, or precise software-defined volume adjustment is required. Because its operating supply range is specified as 5 V to 7.3 V, the surrounding circuit must provide compatible positive and negative analog rails where the application requires the stated 4.2 Vrms output capability. Designers should preserve the datasheet-specified bypass and output-load conditions when evaluating signal integrity. The 10 kOhm load used for the stated maximum-output condition is relevant to downstream amplifier planning, and any external coupling or amplifier input must not load the output beyond the supported operating conditions. Decoupling should be placed close to the supply pins, and the common-bus wiring of multiple devices should be kept short to minimize coupling between channels. This product data combines the verified ROHM feature description with distributor packaging information, practical multi-channel application guidance, and explicit data-gap markers. It distinguishes verified numeric performance from unreported specifications and does not infer a pin assignment, temperature range, or drop-in substitute that the supplied sources do not confirm.
BD3814FV-E2 - 6-Channel Audio Processor | ROHM
ROHM BD3814FV-E2 is a six-channel electronic-volume audio processor designed for bass and treble tone-control functions in audio systems. It operates from a 10 V to 14.6 V supply range, supports a 2-wire control interface, and is packaged in a 40-terminal SSOP-B. ROHM identifies the BD3814FV family as a Last Time Buy product following a discontinuation announcement, so engineers should include lifecycle risk in new-design decisions. An audio processor is an analog signal-conditioning integrated circuit that controls, attenuates, or shapes audio signals between source and amplifier stages. In the broader product hierarchy, the BD3814FV-E2 belongs to audio processors, analog audio control ICs, and integrated circuits for consumer and professional audio equipment. Its electronic-volume function can provide centralized level and tone adjustment without requiring a separate potentiometer or mechanically operated control for every audio channel. The device is identified as a six-channel electronic-volume processor with bass and treble control. These functions are relevant in multi-zone audio systems where different speaker groups require independent attenuation or tonal compensation. The 40-SSOP-B package provides a relatively high pin count for an analog control IC, supporting multiple signal and control connections while remaining compatible with conventional surface-mount PCB assembly. The BD3814FV-E2 uses a 2-wire interface for tone-control functions. This interface-oriented approach is appropriate for systems where several control parameters are handled through a shared control link rather than a large number of discrete analog inputs. System integrators should confirm the exact control protocol, logic levels, timing, and supported commands against the manufacturer datasheet before finalizing firmware or host-controller communication. Typical applications include multichannel amplifier boards, active speaker crossover networks, car-audio tone controllers, home-theater preamplifiers, compact stereo systems, and commercial audio distribution equipment. In a multi-zone amplifier, the processor can be positioned in the signal path ahead of power amplifiers so bass and treble adjustments are handled consistently across the available channels. Its six-channel architecture is especially useful where several speaker zones need coordinated volume and tone control. Because the BD3814FV-E2 family has entered Last Time Buy status, engineers should review the manufacturer product page for lifecycle notices, ordering information, and any applicable change notifications. A robust design should also reserve the footprint for a qualified alternate only after its pinout, control interface, electrical limits, and acoustic behavior have been compared with the original device. This page combines the confirmed product identity, lifecycle information, package details, application context, engineering guidance, and sourcing considerations for the BD3814FV-E2. It is intended to help designers assess whether the device’s six-channel electronic-volume architecture and 2-wire tone-control interface fit a new or existing audio-control board while accounting for its discontinued-family status.
BD3823FV-E2 5-Channel Audio Processor | ROHM Semiconductor
The ROHM Semiconductor BD3823FV-E2 is a 5-channel audio signal processor with a 3.2 uVrms low-noise specification, 0.0015% low distortion, and a 20-pin SSOP-B surface-mount package. It operates from 7 V to 14.5 V and supports NTSC and PAL audio systems. The device combines channel selection with a resistor-ladder volume function for multichannel audio recording equipment. An audio signal processor is an interface IC that conditions, selects, and controls multiple audio paths within an entertainment system. Its place in the product hierarchy is audio signal processor, interface IC, audio subsystem, and electronic control component. The BD3823FV-E2 is intended specifically for DVD recorders and related consumer-video equipment where several standard audio channels must be routed while keeping the reproduced signal quiet and acoustically transparent. The primary features include five-channel selection, low output noise of 3.2 uVrms, and low distortion of 0.0015%. Its 7 V to 14.5 V operating range accommodates the supply voltages commonly found in multi-rail consumer-electronics equipment, while its -40°C to +85°C operating-temperature range supports industrial temperature conditions. An I2C interface permits a host controller to configure the processor rather than relying exclusively on mechanical switches. The 20-pin SSOP-B package uses surface-mount technology and provides a compact implementation for audio-processing functions. Because the package has closely spaced leads, assembly processes should be qualified for the specified lead pitch and soldering profile. The device integrates multiple signal-processing functions instead of requiring a separate selector and volume-control arrangement, reducing the number of discrete signal-path components in a DVD recorder. Typical uses include DVD recorder audio routing, NTSC and PAL video-system audio interfaces, multichannel consumer-audio selection, and embedded audio-control subsystems. The processor can serve as the central interface between audio sources, amplifier or codec stages, and the recorder's system controller. Its low-noise and low-distortion characteristics are especially relevant where preserving the original recording signal is more important than simply switching channels. Design the power rails so that the 7 V to 14.5 V operating range is maintained under load, and place the device's decoupling capacitors close to the supply and ground connections. Confirm the board footprint and pin orientation against the ROHM Semiconductor datasheet before layout release. PCB review should also check signal return paths, ground continuity, and keepouts around the SSOP-B leads. This page combines the ROHM Semiconductor device description, package and operating characteristics, sourcing guidance, and practical design considerations into a focused engineering reference. It also distinguishes documented functions from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate the BD3823FV-E2 before committing a board design to this specialized audio interface.
BD3823FV-ME2 - Low-Noise Audio I/O Interface IC | ROHM
The ROHM BD3823FV-ME2 is a low-noise audio I/O interface integrated circuit designed for NTSC/PAL audio signal processing in recording and DVD-recorder equipment. The device provides a five-channel selector with a resistor-ladder-type volume function, low output noise of 3.2 uVrms, and low distortion of 0.0015%. Its wide power-supply operating range of 7 V to 14.5 V supports systems with input signals up to 4.5 Vrms while maintaining high signal-to-noise performance. An audio I/O interface IC is a functional block within the broader signal-chain hierarchy of audio analog and mixed-signal electronics. It routes and conditions multiple audio channels, provides level control, and helps establish a controlled path between source circuitry and downstream recording or playback stages. In a DVD recorder, such an interface can reduce the number of discrete switching, attenuation, and routing elements required around analog audio paths. The BD3823FV-ME2 combines channel selection with integrated resistor-ladder volume control. Its 3.2 uVrms noise specification is particularly important in low-level audio paths because excess circuit noise can raise the system noise floor and reduce the usable dynamic range of recordings. The 0.0015% distortion specification also indicates that signal-level conditioning can be maintained with low added harmonic error. The 7 V to 14.5 V supply range gives the circuit flexibility across 12 V-class analog equipment while requiring correct bypass and grounding. Its architecture is centered on audio signal selection and attenuation rather than high-speed digital conversion. Consequently, board design should prioritize short analog traces, clean grounding, stable supply bypassing, and control of unwanted coupling from switching regulators and digital circuitry. Typical applications include DVD-recorder analog audio routing, NTSC/PAL recording equipment, multi-channel audio selection, and low-noise analog volume-control stages. The five-channel selector is useful where several source paths must be directed through a common output stage, while the integrated ladder reduces external passive volume-control requirements. Designers should verify the complete pin assignment and exposed-terminal requirements against the manufacturer datasheet before layout release. Decoupling should be placed close to the supply pins, analog ground returns should remain low impedance, and unused inputs should be handled according to the datasheet. The 7 V minimum supply must be respected during startup, and input amplitude should remain within the stated 4.5 Vrms capability. This page consolidates the documented architecture, key electrical performance, packaging information, sourcing path, and engineering considerations for engineers evaluating the BD3823FV-ME2 in legacy NTSC/PAL recording and audio-routing designs.
BD3825FS-E2 - 2-Channel Audio Switch | ROHM Semiconductor
The ROHM Semiconductor BD3825FS-E2 is a two-channel audio switch IC intended for DVD recorder audio I/O routing. It is identified as a 24-pin SSOP-A device with a 0.8 mm multi-lead package and 5.40 mm overall width. The device is designed to route multiple audio input lines according to commands from a video-signal LSI or a microcontroller. The BD3825FS-E2 belongs to the audio switch and audio interface IC category. An audio switch IC is a signal-routing semiconductor that connects, disconnects, or selects audio paths within an electronic system. This type of interface IC sits between audio sources, amplifiers, recorders, and system control logic. It is different from an audio amplifier, which increases signal power, because the BD3825FS-E2 primarily controls signal selection and routing. ROHM identifies the BD3825FS as a device for PAL DVD recorders. The related application information states that the switch and frequency-synthesis outputs are controlled by the BD3825FS, while the device is controlled through the I2C bus of the BH7624KS2 video-signal LSI. When used independently, pins 1, 2, 6, 7, 10, and 12 must be controlled by the microcontroller. This makes the part suitable for systems that need programmable selection of multiple audio input lines. The BD3825FS-E2 is packaged in a 24-SSOP-A configuration. Its compact surface-mount format supports dense consumer-electronics layouts while providing separate control and signal-routing connections. The -E2 ordering suffix identifies the exact ROHM catalog variant used in distributor listings. A 24-SOP listing identifies the body width as 0.213 inches, equivalent to 5.40 mm, with a 0.8 mm lead pitch. The switch is intended for DVD recorder audio interfaces and related multimedia equipment. In a typical implementation, a controller writes the required routing state to the BD3825FS, which then selects the appropriate audio path for recording, playback, or external input. The design must account for the device-specific control pins, pull-down requirements, signal levels, and the exact pin-assignment table in the manufacturer datasheet. This product page focuses on BD3825FS-E2 identification, package information, application fit, and practical selection considerations. It is intended to help engineers locate the correct datasheet, verify footprint compatibility, and determine whether the device matches the audio-routing architecture used in DVD recorder and related equipment.
BD3826FS-E2 - 3-Channel Audio Switch | ROHM Semiconductor
ROHM Semiconductor BD3826FS-E2 is a three-channel audio signal switch IC for DVD recorders, presented in a 32-SSOP-A surface-mount package. The device accepts a 2.5 V to 5.5 V supply range and provides analog signal routing for multi-channel audio systems. Its 32-pin package supports the control and signal connections required by a complex consumer-audio signal path. An audio switch IC is an interface component that routes left, right, and related analog audio channels between circuit sections. In the broader electronics hierarchy, it belongs to the audio interface IC class, connects to signal-path ICs such as amplifiers, codecs, and converters, and ultimately supports complete consumer-audio systems. Its primary role is channel selection rather than signal amplification or digital-to-analog conversion. The BD3826FS-E2 is identified as a three-channel switch with a 2.5 V to 5.5 V operating range. These characteristics make it suitable for low-voltage, multi-channel consumer equipment in which several analog sources must be selected and passed to downstream audio circuitry. The manufacturer identifies DVD-recorder signal switching as a principal application for the BD3826FS family. The 32-SSOP-A construction provides a practical surface-mount footprint for compact boards while exposing the control and analog-channel connections required by a three-channel device. Because this is an analog routing component, board-level implementation must account for source impedance, grounding, channel isolation, and the prevention of unwanted pop or noise. Stable supply decoupling and short signal traces are particularly important when the switch sits close to amplifiers or system ground references. Typical uses include DVD-recorder audio routing, stereo and multichannel entertainment equipment, analog source selection, and other consumer-audio products that require coordinated switching of multiple signals. The BD3826FS-E2 is most appropriate when the design uses a compatible three-channel routing architecture and can verify the complete pin assignments and control timing against the manufacturer datasheet before layout approval. Designers should verify the pin description table, control logic, recommended application circuit, and external-component requirements in the ROHM datasheet. If the original PCB has already been laid out for this device, preserve its footprint and verify signal levels against the downstream amplifier input range. A footprint-compatible replacement should not be assumed unless its pinout, control interface, supply range, and channel behavior have been checked directly. This product record combines the verified identity, package, channel count, supply range, application, and ordering information with structured design guidance for signal integrity, layout, and replacement assessment. It also distinguishes a true pin-compatible substitute from merely related audio-switching devices, helping engineers make a controlled sourcing decision without changing the board architecture.
BD3841FS-E2 - 9-Channel Stereo Input Selector | ROHM
The ROHM BD3841FS-E2 is a 9-channel stereo input selector and audio switch IC with a 2-wire serial control interface, supplied in a 32-SSOP-A package. It supports 6-channel or 9-channel stereo input arrangements, features low cross-talk between channels, and is designed for multi-room entertainment and multi-source recording systems. The device operates from 10 V to 14.6 V according to its distributor product information. An audio input selector is an analog signal-routing IC that chooses among multiple audio sources while preserving the selected channel’s signal integrity. In the broader component hierarchy, the BD3841FS-E2 belongs to analog switches and multiplexers, which are signal-path ICs used to route audio rather than amplify, digitize, or decode it. Its switching architecture allows several source and volume-control functions to share a serial control bus within a home-theater or multi-zone audio system. The principal features include support for 2-room entertainment and 2-source recording, simultaneous control of compatible six-channel volume LSIs, and expansion to 14 input channels by combining a BD3841FS with a BD3843FS. ROHM highlights excellent cross-talk characteristics produced by its original switching pattern. These characteristics are particularly relevant when adjacent channels carry different program sources and unintended source bleed would be audible. The BD3841FS-E2 supports 6-channel and 9-channel stereo input-selection configurations and uses a 2-wire control connection, reducing the number of serial lines required by the system controller. The manufacturer’s example-circuit guidance emphasizes validating external component values and circuit characteristics for the intended application, since external networks and connected circuitry can affect static and transient performance. Typical uses include multi-room home-entertainment receivers, multi-source recording equipment, stereo selector panels, and audio/video receiver input routing. It can also participate in a larger 14-channel arrangement alongside the BD3843FS and compatible BD3813KS, BD3815KS, BD3816K1, or BD3817KS volume-control devices controlled over the same serial bus. Designers should preserve the pin assignments and exposed pad requirements shown in the ROHM datasheet when laying out the 32-SSOP-A footprint. The audio path should be evaluated for insertion loss, off-channel isolation, crosstalk, and pop-noise behavior across every source combination that the product will present to users. This page organizes the confirmed operating information, package details, source-control architecture, application fit, and verified cross-reference context into an engineering-focused resource. It also identifies the specific electrical and pin-level details that should be confirmed in the manufacturer datasheet before a new layout or replacement design is released.
BD3843FS-E2 - 6-Channel Stereo Input Selector | ROHM
The ROHM BD3843FS-E2 is a 6-channel stereo input selector and audio function-switch IC built around two independently controlled output systems. According to the manufacturer datasheet, it accepts two 6-channel input groups, provides a 2-channel recording output and a 1-channel line output, and includes built-in buffer amplifiers. The device is offered in a 24-pin SSOP-A24 surface-mount package and uses a two-wire serial control bus compatible with 3.3 V and 5 V control systems. An audio function-switch IC is a specialized analog interface device that routes multiple audio sources within an audio system while preserving channel isolation and signal integrity. In the product hierarchy, the BD3843FS-E2 belongs to the broader family of analog audio processors, function switches, and interface ICs. Its internal routing architecture allows one input group to be selected for recording while another group feeds the line output, making it useful in multi-source entertainment equipment that must switch audio paths without continuous external relay noise. Key features include independent control of two output systems, support for simultaneous operation with six-channel and seven-channel volume LSIs, and the ability to build a 14-channel input arrangement by combining BD3843FS and BD3841FS devices. The manufacturer also highlights the original pattern layout for excellent cross-talk characteristics between channels. A built-in buffer amplifier reduces the need for additional output buffering in suitable line-level designs, while the serial interface simplifies connection to a system controller. The BD3843FS-E2 supports 2-room, 2-source entertainment and recording systems. It can be paired with the BD3813KS and BD3815KS six-channel volume LSIs, or with the BD3816K1 and BD3817KS seven-channel volume LSIs, through the shared serial control bus. This arrangement supports coordinated input selection and volume control in home-theater equipment, multi-room audio systems, car audio systems, and other stereo products with several local sources. Because the device performs analog routing and buffering rather than high-power amplification, it belongs near the line-level signal path and requires suitable source impedance, trace routing, grounding, and decoupling. The 3.3 V or 5 V serial-control compatibility permits integration with both legacy 5 V control logic and lower-voltage systems. Confirm the complete electrical limits and pin assignments in the manufacturer datasheet before finalizing a board design. This product page combines the manufacturer’s functional description with practical application guidance, interface relationships, sourcing routes, and a structured view of the BD3843FS-E2’s role in multi-source stereo equipment. It emphasizes design usage rather than repeating only catalog identifiers, helping engineers identify whether the selector architecture matches their channel-count, control-bus, recording-output, and line-output requirements.
BD3869AF-E2 2-Channel I2C Audio Processor | ROHM
ROHM Semiconductor BD3869AF-E2 is a two-channel audio signal processor designed for television audio systems and other consumer-audio applications. The device combines integrated audio processing with I2C control, supports as many as three channels simultaneously, and uses a Bi-CMOS process. It is packaged for surface-mount assembly in an 18-SOP package, with tape-and-reel packaging identified for the -E2 ordering code. An audio signal processor is an application-specific integrated circuit that adjusts or manages audio signals within a larger signal chain. Unlike a general-purpose codec, which primarily performs conversion between analog and digital representations, this device is designed around predefined audio-control functions. In the BD3869AF family, one prominent function is loudness adjustment linked to volume attenuation, allowing a television or similar system to coordinate perceived loudness with the selected volume level. The processor also provides I2C bus control for integration with a system controller. The BD3869AF-E2 supports a control-voltage range of 3.3 V to 5.5 V and allows a maximum of three channels to be used simultaneously. Its two-channel architecture makes it suitable for stereo television audio paths, while the multi-channel capability provides flexibility for systems that also need an additional processed channel. The -E2 variant is identified with surface-mount, tape-and-reel handling for automated production assembly. The Bi-CMOS implementation combines bipolar circuitry with CMOS circuitry in one monolithic integrated circuit. In the BD3869AF/BD3869AF-E2 family, this process supports the analog signal-processing functions required by the television audio processor while also enabling the digital control functions associated with its I2C interface. The manufacturer describes the BD3869AF and BD3869AF-E2 as an audio sound processor for TV systems, positioning the device within the broader hierarchy of consumer-audio ICs, audio signal processors, and application-specific semiconductors. Typical applications include television speaker-path control, stereo television audio processing, volume-attenuation coordination, and sound systems that require programmable audio behavior through an I2C bus. The processor can be paired with a television audio amplifier when a system requires an external power stage after low-level signal processing. It may also be used in other consumer-audio products that can reproduce the required signal functions and implement the corresponding control protocol. When designing around the BD3869AF-E2, confirm the complete pin assignment, analog signal levels, control registers, and external-component recommendations in the Rohm datasheet before finalizing the PCB. Pay particular attention to the 18-SOP footprint, the 3.3 V to 5.5 V control-voltage range, and the interface requirements of the host controller. Decoupling, grounding, and analog-versus-digital partitioning should follow the manufacturer’s reference layout to reduce noise coupling into the processed audio paths. This product record combines the verified device identity, package format, control interface, channel capability, process technology, and sourcing context with practical design guidance. It also distinguishes the exact BD3869AF-E2 orderable device from unsupported claims about other package variants and provides a clear basis for checking datasheets, pin assignments, lifecycle status, and replacement requirements.
BD3871FS-E2 - 2-Channel Audio Processor | ROHM
ROHM BD3871FS-E2 is a 2-channel bipolar CMOS sound processor with a 4.5 V to 9.5 V supply range in a 24-SSOP-A package. It integrates tone-shaping functions for stereo audio systems, including adjustable bass characteristics, surround-sound processing, and mute control for reducing crosstalk. A sound processor is an analog audio integrated circuit that modifies or controls audio signals between a source and an output stage. In the broader electronics hierarchy, it belongs to the audio signal-processing category, connects to audio codecs and interface ICs, and ultimately supports broader audio signal-chain and power-management systems. The BD3871FS-E2 is intended for compact stereo equipment where tone adjustment, channel control, and surround processing can be integrated without a separate digital signal processor. The bass section uses external components, allowing its center frequency and Q factor to be adjusted to match the speaker system and target acoustic response. This flexibility is useful in consumer audio products because a fixed internal filter may not provide adequate control across different cabinet sizes, driver impedances, or listening positions. The device also supports a surround function constructed without external components, reducing board area and component count where that processing mode is required. A mute function is assigned to one input pin, enabling channel suppression during switching or mode changes and helping reduce crosstalk between stereo paths. The bipolar CMOS process combines bipolar circuitry with CMOS logic and supports low current consumption for an energy-saving design. The 24-SSOP-A package provides a compact surface-mount format suitable for home-audio, automotive-audio, and portable-equipment signal boards. Typical uses include stereo tone-control boards, mini hi-fi amplifiers, television audio paths, compact stereo systems, and aftermarket speaker selectors. In a home-audio design, the processor can shape bass response ahead of a power amplifier while a mute input handles source changes. In automotive systems, its integrated surround function can add room-effect processing without requiring a separate surround decoder. The main design consideration is the external-component network around the bass filter. Component tolerances and the selected center frequency and Q factor directly influence tonal balance, so prototype the network against the intended loudspeaker load. Keep audio inputs and outputs away from switching supplies and high-current amplifier paths to preserve signal integrity. This product page combines manufacturer feature information, practical application guidance, package and interface details, and carefully qualified drop-in replacement information to support faster engineering evaluation and sourcing decisions.