Interface ICs
ژێرپۆلەکان
بەرهەمەکان (5,100+)
BD3872FS-E2 - 2-Channel 3-Band Audio Signal Processor, SSOP-24 | ROHM Semiconductor
The ROHM Semiconductor BD3872FS-E2 is a two-channel bipolar-CMOS (BiCMOS) analog sound processor with built-in three-band equalizers, supplied in a 24-pin SSOP-A (PDSO24) surface-mount package on tape-and-reel. It operates from a 4.5 V to 9.5 V supply, making it directly compatible with the 5 V and 9 V rails typical of car audio head units, home theater preamplifiers and compact stereo amplifiers. An audio sound processor is a signal-conditioning IC placed between a source (tuner, DAC, cassette or optical deck) and a power amplifier. Its job is to shape the spectrum and level of the audio path rather than to amplify power. Within the product hierarchy, the BD3872FS-E2 sits as an analog audio processor, a sub-class of audio signal processor, itself part of the broader family of interface ICs and signal-conditioning semiconductors. Key features of the BD3872FS-E2 include a three-band equalizer per channel with bass characteristics tunable through external components, so center frequency and Q factor can be set by the board designer. A mute function is provided on one of the input pins to suppress cross-talk between channels, and a surround-sound function can be realized without external components. The BiCMOS process technology used in the device keeps current consumption low, which matters in battery-fed and vehicle-installed equipment where quiescent drain translates directly into standby current. Because the equalizer network is set by discrete external components, the same silicon can be re-tuned per product variant: a consumer home-theater set can be voiced for deep bass while a car amplifier line can be voiced for cabin acoustics. The built-in surround function allows a two-channel source to be expanded into a cinema-surround presentation without adding external matrix circuitry. Typical applications include car audio head-unit tone control, home theater and cinema surround processing, AV receiver channel equalization, active speaker and mini-system input conditioning, and portable consumer audio products. When laying out the board, keep the input and output routing short and place the equalizer resistors and capacitors close to their associated pins to minimize stray pickup of switching noise. Note that the E2 suffix denotes the tape-and-reel packing option with a standard reel quantity of 2,000 pieces.
BD3883FS-E2 - Audio Sound Controller | ROHM Semiconductor
The ROHM Semiconductor BD3883FS-E2 is an analog audio sound controller with built-in three-band equalization, front and rear volume processing, surround and rear-volume functions, and soft-switch volume transitions. It uses resistance-ladder volume and tone circuits, a two-stage front/rear volume architecture, and ROHM's BiCOMS process to provide low-noise, low-distortion audio control with low power consumption. The device is supplied in a 32-pin SOP surface-mount package. An audio sound controller is a specialized analog integrated circuit that sits between audio sources and power amplifiers. It provides signal-level functions such as volume, tone, balance, surround, and channel routing without performing the final power-amplification stage. The BD3883FS family belongs to the broader audio processor hierarchy: analog sound controller, audio signal-processing IC, interface IC, and semiconductor. Key features include high signal-to-noise performance obtained through a two-stage configuration for front volume and rear volume. It provides surround and rear volume with soft switching to reduce shock noise during transitions. Volume and tone are implemented with resistance-ladder circuitry for low noise and low distortion, while the BiCOMS process supports low-current operation and energy-saving designs. Technically, the part is intended to process multiple analog audio channels through external resistors and conventional signal-path components. Its resistance-ladder implementation provides discrete attenuation paths rather than relying on an active gain-control mechanism. The two-stage volume arrangement separates level-control functions into cascaded stages, helping the manufacturer achieve a high signal-to-noise ratio while supporting front, rear, and surround-volume operation. Typical applications include home-audio systems, stereo receivers, mini hi-fi systems, television audio paths, powered speakers, and other equipment requiring tone and multi-channel volume control. The soft-switch behavior is especially useful when changing listening modes because it helps avoid audible transients. Integration can reduce the number of separate attenuator networks while retaining direct control of several audio-volume functions. A key design consideration is the analog signal path. Board layout should keep input and output audio traces short, maintain grounding continuity, and place any bypass or filter components close to their associated pins. Before schematic capture, engineers should consult the manufacturer datasheet for the complete pin map, supported supply voltage, channel arrangement, external resistance values, and recommended application circuit. This page consolidates verified ROHM product information, current distributor pricing, package details, application guidance, and verified replacement analysis. It also clearly identifies where package-specific pin data or confirmed drop-in alternatives are unavailable, helping engineers distinguish sourced facts from parts that still require circuit-level validation.
BD3884FS-E2 2-Channel Audio Processor | ROHM
The ROHM Semiconductor BD3884FS-E2 is a two-channel audio signal processor for television sound systems, packaged in a 24-pin SSOP surface-mount package. Its headline features include separate processing for two audio channels, integrated automatic gain control for balancing differences among input sources, and a compact 24-SSOP footprint suitable for space-constrained television and consumer-electronics designs. The device is identified as a tone-control circuit in component listings. An audio signal processor is a specialized analog integrated circuit that conditions audio signals before they reach amplifiers, speakers, or downstream digital converters. Within the product hierarchy, the BD3884FS-E2 is an audio signal processor, an audio special-purpose IC, and a semiconductor. Its two-channel organization permits paired stereo signals to be processed consistently while reducing the component count compared with separate single-channel circuits. The manufacturer datasheet identifies a built-in AGC circuit that adjusts the sound difference among input sources. This function is useful when signals arrive at substantially different levels because the processor can help reduce level imbalance before downstream amplification. The BD3884FS-E2 also appears in distributor classifications as a TV audio amplifier or sound processor, identifying television audio conditioning as its principal application area. The BD3884FS-E2 combines tone control with two-channel audio processing in one monolithic integrated circuit. Its surface-mount SSOP-24 construction supports automated PCB assembly while requiring less board area than a larger through-hole package. Because audio behavior depends on external resistors, capacitors, source impedance, and the surrounding signal path, designers should reproduce the manufacturer application circuit and verify channel balance, gain behavior, distortion, and stability in the finished television design. Typical implementations include stereo television speaker systems, television main-audio processing, audio source switching and level balancing, and consumer electronics requiring a dedicated tone-control stage. The integrated AGC can be particularly valuable when multiple source paths produce inconsistent volume levels. For battery-powered portable products, power consumption must also be checked because analog signal processors commonly remain active whenever the television audio subsystem is enabled. A key design consideration is that the device does not replace the final power amplifier. Place it before the audio output amplifier and observe the signal levels, impedance, and grounding arrangement specified in the manufacturer datasheet. PCB layout should keep audio traces away from switching nodes and high-current return paths, while stable decoupling and grounded return paths help preserve low-level audio fidelity. This product page consolidates the exact device identity, package information, sourcing details, functional attributes, and engineering guidance for the BD3884FS-E2. It also distinguishes documented capabilities from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate the part efficiently before beginning a television audio-board design.
BD3893FV-E2 3-5.5V Sensor Signal Processor | ROHM
The ROHM Semiconductor BD3893FV-E2 is an analog signal-processor IC for sensor interfaces, featuring analog input and analog output in a 16-SSOP-B package. It operates from a 3 V to 5.5 V supply and includes a built-in 50 MΩ resistance for the pre-amplifier, making it suitable for shock-sensor signal conditioning in HDD, CD, and DVD drives. A sensor signal processor is a specialized interface IC that converts a weak or variable sensor signal into a form suitable for further detection or control. Its role within the hierarchy is sensor interface IC → signal-processor IC → analog interface circuit. The BD3893FV-E2 can support both voltage-sensitivity and electric-charge-sensitivity shock-sensor designs, reducing the amount of external signal-conditioning circuitry required near a storage-drive actuator or sensor. The principal features include a 3 V to 5.5 V operating supply range, analog input and output, an integrated 50 MΩ pre-amplifier resistance, and support for voltage-sensitive and charge-sensitive shock sensors. These characteristics make the device applicable where a sensor signal must be amplified or conditioned before being interpreted by another control or signal-processing circuit. Tape-and-reel packaging supports automated production handling. The BD3893FV-E2 belongs to ROHM Semiconductor's sensor-interface product category and is specified for a 16-pin SSOP-B package measuring approximately 0.175 inch by 4.40 mm. Its analog architecture is intended for dedicated sensing systems rather than general-purpose data acquisition. The integrated pre-amplifier resistance can simplify the sensor network, but the complete circuit still requires suitable passive components, grounding, and protection appropriate to the mechanical shock and electrical-noise environment. Typical applications include HDD, CD, and DVD drive shock sensors, where the IC can process a mechanical-impact or vibration signal close to the drive mechanism. It may also be evaluated in optical-disc mechanisms, compact electromechanical assemblies, and other sensor systems that use analog shock detection. The 3 V to 5.5 V supply range is compatible with common embedded and storage-system supply rails. When designing around the BD3893FV-E2, match the sensor type to the voltage-sensitive or electric-charge-sensitive interface method and keep sensitive analog traces away from switching and high-current paths. Validate the pre-amplifier network, input filtering, grounding, and output range against the intended mechanical shock profile. Use the manufacturer pin-description table when assigning PCB tracks because complete pin names are not reproduced on this page. This page combines the confirmed operating limits, package information, application context, practical circuit guidance, and sourcing information for BD3893FV-E2. It also distinguishes documented device characteristics from order-code and mechanical details that require confirmation during component qualification.
BD3896FV-E2 Shock Sensor Signal Processor | ROHM
ROHM Semiconductor BD3896FV-E2 is an integrated input/output IC identified for shock-sensor signal processing. The device is listed in the ROHM Semiconductor catalog as an audio amplifier and shock-sensor signal-processor product, while distributor classification places it among sensor and detector interface ICs. It is supplied in tape-and-reel packaging under the exact ordering code BD3896FV-E2. An input/output interface IC connects sensing elements to the rest of an electronic system by conditioning, converting, or otherwise processing sensor signals. In the hierarchy of electronic components, the BD3896FV-E2 belongs to the sensor interface class, which sits between a physical sensor and higher-level processing circuitry. Its shock-sensor signal-processing role makes it relevant to systems that must interpret mechanical vibration, impact, or other motion-related inputs. The principal selection characteristics for this device are its dedicated ROHM product family, input/output IC classification, shock-sensor signal-processing application, and tape-and-reel production format. Because it is identified specifically as a signal processor rather than only as a generic interface, it is best evaluated alongside the sensor technology, signal range, conditioning requirements, and downstream controller used in the target system. The exact electrical ratings and timing limits should be confirmed against the manufacturer datasheet before schematic release or qualification. Typical uses include shock and vibration sensing, impact detection, industrial equipment monitoring, consumer-device motion sensing, and embedded sensor interfaces. In each case, the processor can sit between a mechanical sensing element and a microcontroller, providing the interface stage needed to transform a physical event into an electrical signal suitable for further processing. System-level success depends on matching the sensor characteristics to the device's documented operating conditions. Design work should begin with the manufacturer's pin description and typical application circuit. Confirm supply voltage, supported sensor type, signal polarity, output format, operating temperature, and package dimensions before assigning PCB traces. Pay particular attention to the meaning of each input and output, the required external components, and the handling of any sensor-specific configuration. These checks prevent a catalog-level match from becoming an electrical incompatibility. This product page adds procurement context, verified source links, practical design checks, and structured technical questions for BD3896FV-E2. It is intended to accelerate engineering review while directing critical electrical and pin-level decisions back to the authoritative manufacturer documentation. Use the Request a Quote form on this page for current commercial availability, packaging, and lead-time requirements.
BD3897FV-E2 Shock Sensor Signal Processor | ROHM Semiconductor
The ROHM Semiconductor BD3897FV-E2 is an integrated signal-processor IC for engine knock-sensor applications, packaged in a 16-pin SSOP. It belongs to the sensor and detector interface category, where it processes the electrical waveform generated by a knock sensor before the information is used by an engine-control system. Its 16-pin surface-mount package supports compact implementation in automotive electronic control units. A sensor interface IC is the electronic bridge between a physical sensor and the digital control electronics that interpret its output. In an engine knock-detection system, the sensor produces a signal whose characteristics can indicate detonation-related vibration. The BD3897FV-E2 is identified specifically for knock-sensor signal processing, making it relevant to signal-conditioning, waveform-processing, and engine-management designs rather than general-purpose analog or digital functions. The most clearly defined device characteristics are its integrated-circuit construction, 16-pin SSOP package, signal-processing role, and use in knock-sensor systems. The product listings classify the device as an input/output interface and sensor/detector interface IC. Tape-and-reel packaging is indicated for the -E2 ordering suffix. Electrical ratings such as supply voltage, input range, output format, clock requirements, and temperature limits should be taken from the current ROHM Semiconductor datasheet before schematic or qualification decisions are finalized. In an engine-control module, the BD3897FV-E2 can occupy the dedicated path between a knock-sensor input and the controller logic that evaluates combustion-related vibration. Its 16-pin package provides a defined physical interface for power, sensor connections, and processed signals. Compared with implementing waveform conditioning as discrete components, a dedicated processor can simplify the signal chain and standardize the interface presented to the surrounding engine-control electronics. Typical engineering uses include knock-sensor conditioning, resonant-signal analysis, engine-vibration monitoring, combustion-anomaly detection, automotive electronic control units, and laboratory engine-development systems. These application roles depend on the sensor characteristics, calibration method, and diagnostic thresholds used by the complete system. The BD3897FV-E2 should therefore be selected as part of a complete sensor-interface architecture rather than evaluated only by its package or catalog classification. For PCB implementation, confirm every pin assignment, supply requirement, bypass recommendation, and analog-signal connection against the manufacturer pin-description table. Preserve the specified land pattern and assembly orientation for the 16-pin SSOP. Because sensor-interface performance can depend on grounding, connector routing, and external component selection, prototype measurements should include noise, sensor thresholds, temperature behavior, and fault response across the intended operating range. This product page organizes the known device identity, package information, sourcing links, application guidance, and selection considerations into one engineering reference. It also identifies where a schematic designer must consult the manufacturer datasheet for exact electrical limits and pin functions, avoiding ambiguity between a catalog description and a production-ready design record.
BD3897FVM-TR - Shock Sensor Signal Processor | ROHM
ROHM Semiconductor BD3897FVM-TR is an 8-pin MSOP signal-processing IC identified for shock-sensor signal conditioning and sensor-interface applications. The device is listed as an input/output interface IC, with distributor classifications also describing it as a shock sensor signal processor and audio amplifier-related component. Its compact MSOP-8 package supports space-constrained sensor assemblies where minimizing component count and PCB area is important. A sensor signal processor is a type of interface IC that sits between a physical sensing element and the wider embedded system. Its role is to condition the sensor signal so that downstream circuitry can interpret it reliably. Within the electronics hierarchy, the BD3897FVM-TR belongs to the sensor and detector interface class, interface IC category, and broader integrated-circuit family. This makes it relevant to designs that convert mechanical or acoustic sensor activity into a usable electrical signal. The principal verified feature of the BD3897FVM-TR is its dedicated shock-sensor signal-processing function in an 8-pin MSOP package. The compact package reduces the footprint required for the signal-conditioning stage compared with a larger discrete or multi-chip implementation. Because the shock-sensor interface role is integrated into one IC, designers can simplify the surrounding circuit and shorten the path between sensor output and system processing. The BD3897FVM-TR is categorized as an input/output interface IC by the DigiKey listing and as a shock sensor signal processor by Mouser and Octopart. Those descriptions distinguish it from general-purpose amplifiers and digital logic devices. Engineers should therefore treat it as a specialized sensor-interface solution whose internal signal path is intended for shock-detection or related sensor-conditioning systems. Typical application areas include impact and vibration sensing, shock-triggered control systems, industrial equipment monitoring, and compact embedded sensor modules. The MSOP-8 format is especially useful when the complete sensor interface must fit beside a small sensor element, connector, or microcontroller. Its use can help reduce board complexity while maintaining a dedicated path for conditioning the sensor output. When designing around this device, verify the sensor type, electrical limits, operating modes, bypass requirements, and package-specific layout in the manufacturer datasheet before finalizing the PCB. Pay particular attention to sensor excitation, output signal range, and grounding because these details determine whether the interface preserves the intended shock-event information without saturating or degrading the measurement. This page organizes the verified product identity, package format, application positioning, sourcing information, and engineering design considerations for BD3897FVM-TR. It also distinguishes confirmed drop-in replacements from generic interface chips, helping engineers evaluate PCB reuse and signal-chain compatibility without assuming that a similar amplifier or sensor-interface IC is electrically interchangeable.
BSP75-E6433 - Smart Low-Side Power Switch | Infineon
The Infineon BSP75-E6433 is a logic-level smart low-side power switch intended for 12 V, 24 V, and 42 V direct-current applications. The verified source identifies the device as a μC-compatible peripheral driver and buffer/inverter. Its verified operating-class description covers low-side DC power switching, while its logic-level input permits control from a microcontroller. The exact package designation, pin count, current ratings, on-resistance, and thermal limits were not supplied in the verified data and therefore require confirmation from the manufacturer datasheet before design release. A smart low-side power switch is an intelligent semiconductor interface between a low-voltage controller and a higher-current load placed on the ground return side of a circuit. Its power transistor handles the load current, while integrated control, diagnostic, input-protection, or thermal functions reduce the amount of external circuitry required. Within the broader hierarchy, this device is a peripheral driver or buffer/inverter, a discrete interface function, and a power-management building block rather than a general-purpose logic gate. The BSP75-E6433 is particularly relevant for microcontroller-controlled relays, solenoids, lamps, motors, and other inductive loads connected to DC supplies. Its μC-compatible interface helps connect a digital controller to a power stage, while the cited 12 V, 24 V, and 42 V DC application range supports common industrial, automotive-style, and electromechanical environments. Load current must remain within the manufacturer’s limits because the verified results do not provide a numeric current rating. The available family documentation describes the BSP75 as a smart low-side power switch with logic-level input, input protection, ESD protection, and thermal shutdown with restart. However, because the supplied evidence does not explicitly map every family feature to the exact BSP75-E6433 ordering code, engineers should verify the exact feature list, pin functions, limits, and test conditions in the applicable Infineon datasheet. This distinction prevents assumptions about production behavior, especially for short-circuit diagnostics, overload response, and package thermal performance. Typical uses include distributed power distribution, solenoids, relay coils, indicator lamps, and small DC motor systems. In each circuit, the controller drives the input while the switch conducts current from the load toward ground. Inductive loads usually require a flyback path, but the required diode arrangement, current rating, and switching limits must be selected from verified device and application data rather than inferred solely from the product description. Before layout, confirm the exact package and pinout, then check load-current capability, voltage rating, on-resistance, thermal limits, input thresholds, and shutdown behavior. The verified search results identify datasheet and pinout resources but do not provide the underlying electrical tables. A component-level review should therefore use the official BSP75-E6433 documentation and confirm the supplier’s traceability and lot information. This page consolidates the verified distributor availability, pricing references, family functionality, sourcing links, and engineering gaps for BSP75-E6433. It also distinguishes documented facts from missing production specifications, helping designers move from a promising 12 V, 24 V, or 42 V DC peripheral-driver candidate to a controlled schematic and PCB release.
CD4051BCM - 8:1 240Ohm Analog Switch | onsemi | Multiplexer
The onsemi CD4051BCM is a single 8-channel analog multiplexer and demultiplexer with an 8:1 circuit configuration, 240-ohm on-state impedance, and a 16-SOIC package. It is a digitally controlled analog switch designed to route one of eight common or individual analog channels to a common output, or route a common input to one selected channel. The device provides low ON impedance and very low OFF leakage current. An analog multiplexer is a semiconductor switching device that connects multiple signal paths to a shared resource. The broader hierarchy is analog switch, multiplexer or demultiplexer, interface IC, and semiconductor. This topology reduces the number of external pins and interconnects required when a controller must measure multiple analog inputs or distribute an analog signal among several destinations. The CD4051BCM includes three digital control inputs for channel selection and one inhibit or disable input. Its digital control architecture allows a microcontroller or logic system to select the desired analog path. The principal channel characteristics identified for this device are its 240-ohm ON impedance and very low OFF leakage current, which are important when selecting it for sensor acquisition, signal routing, or precision analog measurement. The CD4051BCM belongs to the CD4000 CMOS logic family and can operate as either an 8-channel multiplexer or an 8-channel demultiplexer, depending on how the common and individual channel terminals are connected. The 16-SOIC package supports conventional surface-mount assembly, while the device's principal application role remains the selection of one analog signal path from a group of eight. Typical uses include multiplexed sensor interfaces, laboratory and test equipment, industrial control systems, data acquisition modules, and audio signal routing. It is particularly relevant when eight analog inputs must be presented to a single converter or processor without requiring a separate switch for every input. System designers should still evaluate signal range, switching speed, charge injection, and operating-voltage limits against the application. For PCB design, keep the selected analog channel traces short and place the device close to the multiplexer output when possible. Route control inputs away from sensitive analog nets, use a solid ground reference, and follow the manufacturer datasheet for decoupling and unused-pin handling. Avoid presenting the logic selects as sufficient protection against excessive input or output voltage. This page combines the verified product identity, a parameter-focused comparison, practical routing guidance, and carefully qualified replacement information. It distinguishes electrically similar devices from confirmed drop-in choices so engineers can evaluate footprint, control logic, signal integrity, and operating conditions before redesigning a board.
CD4051BCN - 8:1 CMOS Analog Multiplexer | onsemi
onsemi CD4051BCN is an 8:1 CMOS analog multiplexer and demultiplexer with an on-state resistance of 240 ohm, housed in a 16-lead plastic dual-in-line package. It uses three binary select inputs and an inhibit control to route one of eight analog channels to a common terminal, while the same device can distribute one signal to eight destinations in demultiplexer mode. Its complementary-input structure supports signal-routing and channel-selection functions in analog and mixed-signal equipment. An analog multiplexer is a semiconductor switch that connects one of several input terminals to a shared output. It belongs to the broader switched-routing and signal-path hierarchy and is commonly used to reduce the number of external connections required by analog, control, measurement, and communication systems. The CD4051BCN combines digital address selection with analog switching, allowing a microcontroller or other logic circuit to control which physical channel is connected. The principal features include eight analog inputs, one common analog terminal, three address inputs, an inhibit input, and dual supply rails for bipolar analog operation. The manufacturer datasheet identifies low on-state impedance and very low off-state leakage as defining characteristics. Its 16-PDIP construction follows the JEDEC MS-001 package outline, making it appropriate for through-hole assemblies and legacy-compatible boards rather than compact surface-mount designs. The three select inputs establish one of eight binary channel addresses. When the inhibit input is active, the common terminal is disconnected from the channel inputs, providing a convenient way to isolate a selected signal path. Because the control inputs are referenced to the digital supply environment while the analog path can operate across positive and negative rails, the device supports level-compatible control in many dual-supply analog systems. Typical uses include instrumentation signal selection, data-acquisition channel routing, test-equipment control, audio path selection, and industrial control systems. The 8:1 organization is especially useful when several sensors or sources must share one amplifier, converter, display, or communications channel. System designers must also account for off-channel leakage, switching transients, and the voltage ranges allowed at each analog terminal. For a new PCB, preserve the 16-pin DIP footprint and route analog inputs away from high-speed digital clocks and switching nodes. Confirm the supply and signal limits for the selected operating conditions, and ensure the inhibit logic cannot select an unintended channel during reset. A redesign intended for automated assembly should evaluate a surface-mount equivalent rather than assuming a DIP-to-SMD conversion is pin compatible. This page organizes the functional architecture, control behavior, package details, drop-in options, application guidance, and design considerations into a practical engineering reference for selecting and implementing the CD4051BCN.
CD4051BE - 8:1 Analog Multiplexer, 240 Ohm, 16-PDIP | Texas Instruments
The Texas Instruments CD4051BE is a CMOS single 8-channel analog multiplexer or demultiplexer with logic-level conversion, housed in a 16-pin PDIP (N) package. The device features a typical on-state resistance of 125 Ohm at VDD-VEE = 15V, supports signal input ranges over 15 Vp-p at VDD-VEE = 18V, and operates across a wide supply range from 3 V to 20 V single supply or ±10V dual supply. A CMOS analog multiplexer is an analog switch that selects one of N analog input channels and routes it to a single common output line, under control of digital select inputs. Multiplexers belong to the broader category of analog switches and multiplexers, which in turn sit within interface ICs and signal-conditioning components. The CD405xB family from Texas Instruments (originally designed by RCA) provides low-leakage, low-crosstalk switching for precision analog and audio signal paths, with logic-level translation between 3 V digital control and ±10 V analog rails. Key features of the CD4051BE include matched switch characteristics with RON = 5 Ohm typical delta between channels at VDD-VEE = 15V, channel OFF leakage of ±100 pA typical at VDD-VEE = 18V, and very low quiescent power dissipation under all digital control input conditions. The device also offers low ON resistance of 125 Ohm typical, high OFF resistance, and logic-level translation enabling digital control from 3V CMOS logic while switching ±10V analog signals. The 16-pin PDIP through-hole package provides easy insertion into legacy breadboards and through-hole PCB designs. The CD4051BE uses a CMOS architecture with break-before-make switching action, preventing momentary shorting between adjacent channels during channel transitions. The three binary select inputs (A, B, C) along with an active-low inhibit input provide 8 -to-1 multiplexing, while the bidirectional common pin (COM) allows the same device to operate as a 1-to-8 demultiplexer by reversing the role of input and output. This architecture is well suited to low-frequency precision analog signal routing where switch capacitance and leakage, not bandwidth, dominate the error budget. Typical applications include analog signal routing in data acquisition systems, audio signal multiplexing in mixing consoles, sensor signal multiplexing in industrial instrumentation, automatic test equipment channel selection, and telecommunications line selection. The wide supply range allows direct interfacing to both 5V legacy analog systems and modern 3.3V digital controllers without level shifters. When designing with this device, ensure that VEE is connected to ground or negative supply for unipolar operation, and provide adequate decoupling close to VDD and VEE pins. The inhibit pin (INH) should be tied to ground when not used, and select inputs (A, B, C) should not float - tie them to VDD or VSS through a defined logic level to prevent shoot-through current. This page synthesizes distributor pricing, drop-in alternatives in the same 16-PDIP footprint, application-specific guidance for audio and sensor multiplexing, and design considerations not found in the manufacturer datasheet alone.
CD4052B - 20V 4:1 2-Channel Analog Multiplexer | TI
The Texas Instruments CD4052B is a 20 V, 4:1, 2-channel CMOS analog multiplexer and demultiplexer with logic-level conversion, supplied in the package identified by the selected ordering option. Its three control inputs select one of four common terminals, while an inhibit input can disable the selected analog path. The device supports both analog and digital signal routing and is positioned for systems that require multiple signals to share a limited number of input or output pins. An analog multiplexer is a switching IC that connects one of several analog terminals to a common terminal according to binary control logic. In the broader hierarchy, the CD4052B belongs to the CMOS analog-switch and multiplexer class, which sits within interface ICs and broader semiconductor signal-routing systems. Logic-level conversion allows the control inputs to operate from a separate supply domain from the analog signal path, subject to the manufacturer’s absolute-maximum and operating limits. The verified manufacturer description identifies the CD4052B as a 20 V, 4:1, 2-channel multiplexer with logic-level conversion. The verified distributor listing for CD4052BPWR identifies a 2-circuit, 4:1, 240 ohm, 16-TSSOP variant. The selected CD4052B MPN does not itself specify a package suffix, so package-specific physical details, pin names, pinout, and orderable packaging must be confirmed against the applicable TI datasheet ordering table. The CD4052B is useful for sensor selection, measurement-signal routing, audio or communications channel selection, and control systems where analog signals must be routed under digital control. Because it is a CMOS analog switch, designers should account for signal amplitude, leakage, on-resistance variation, control timing, supply levels, and the maximum analog voltage when selecting external circuitry. The inhibit input provides a way to isolate a selected path during reset or system states. The primary design trade-off is that the broad 20 V-capable signal range comes with analog-switch behavior rather than the performance of a modern low-voltage, low-resistance mux. Engineers should verify the exact datasheet limits, package drawing, truth table, and control-input levels before layout or replacement work. The manufacturer product page and datasheet should be treated as authoritative for all unreported values. This page combines the verified TI product description, distributor package information, cross-reference results, and practical routing guidance. It does not invent electrical values, pricing, pin assignments, compliance claims, or package dimensions that were not supplied in the verified data.
CD4052BCM - 2-Channel 4:1 CMOS Analog Multiplexer | onsemi
The onsemi CD4052BCM is a dual 4:1 analog multiplexer and demultiplexer housed in a 16-pin SOIC package, with an on-resistance of 240 ohms per the product listing. It provides two independent analog switching paths for routing signals among multiple sources and destinations, making it suitable for audio, instrumentation, data acquisition, and embedded control designs. The device uses CMOS construction and is specified for operation from a 3 V to 18 V supply in the CD4000 family, with a maximum DC supply voltage of 18 V. A multiplexer is an analog switch network that connects one common terminal to one of several individual terminals. A demultiplexer reverses that arrangement, routing a common signal into one selected branch. The CD4052BCM combines two 4:1 networks in one package, with binary select inputs controlling which pair of channels is connected. Its wide supply range allows operation from 3.3 V and 5 V logic systems through higher-voltage analog and industrial control rails. The principal electrical characteristics include a 240-ohm on resistance and low-leakage CMOS behavior when channels are turned off. Because the on resistance is specified for the conducting path, signal attenuation and channel-to-channel matching should be considered in precision measurement paths. The control inputs are CMOS-compatible, and the inhibit input provides a common mechanism for disabling the selected channels during reset, test, or safety-sensitive transitions. The CD4052BCM is a pin-compatible member of the CD4000 CMOS logic family. Its 16-pin SOIC package is widely supported by standard PCB footprints and automated assembly processes. The M suffix identifies the surface-mount package used by onsemi, while the C suffix identifies the commercial temperature grade. The device is suitable for designs requiring analog routing at modest signal frequencies, particularly when a single logic control section can manage two analog channels. Typical uses include selecting between audio sources, routing sensor outputs into an analog-to-digital converter, switching reference voltages in measurement circuits, multiplexing control lines in test equipment, and connecting multiple inputs to shared communications or instrumentation circuits. In these applications, the multiplexer reduces the number of external pins and routing components required at the system level. The principal design consideration is signal integrity during channel switching. Keep traces short, provide a stable supply reference, and use the inhibit input to place the device in a defined state when the selected channel is not valid. Confirm that the source and destination signal amplitudes remain within the supply rails and that off-channel leakage is acceptable for the measurement or signal amplitude involved. This page consolidates the manufacturer product identity, package details, distributor references, and practical application guidance for engineers evaluating the CD4052BCM. It also provides drop-in replacement context, pin-compatible alternatives, design notes, and a parameter comparison so the device can be selected and qualified efficiently for analog routing designs.
CD4052BCN - 4:1 CMOS Analog Multiplexer | onsemi
The onsemi CD4052BCN is a dual 4:1 CMOS analog multiplexer and demultiplexer with 240 ohms ON resistance, digitally controlled selection, and a 16-pin PDIP package. It is designed to route analog signals among multiple input and output paths while providing low ON impedance and very low OFF leakage current. An analog multiplexer is an interface IC that connects one of several analog signal lines to a shared output. The multiplexer-demultiplexer category extends into analog switches, signal selectors, and interface ICs. The CD4052BCN uses address-control inputs to select one of four channels, making it useful for channel routing, signal selection, test systems, and control interfaces where multiple analog sources must share limited routing resources. The main features of the CD4052BCN are its two-circuit, 4:1 configuration, 240-ohm ON impedance, and low OFF leakage current. These characteristics help preserve signal integrity when the device switches between sources. Its 16-pin PDIP package also provides a through-hole format that is convenient for prototyping, educational assemblies, legacy equipment, and industrial control boards that use socketed or manually assembled components. The CD4052BCN belongs to the CD4000 CMOS logic family, combining digital address decoding with analog signal switching. Address inputs determine the active pair while the device remains in the selected state, allowing the same package to support both multiplexing and demultiplexing functions. Its low ON impedance is particularly useful when connecting higher-impedance sensors, measurement inputs, or low-frequency analog sources to a common front end. Typical uses include sensor-channel selection, data-acquisition systems, instrumentation, industrial control interfaces, audio routing, and communication equipment. In a data-acquisition circuit, four inputs can be presented to one amplifier or converter in sequence. In a test system, the multiplexer can reduce the number of analog input connections required by the controller while preserving predictable channel isolation when a channel is deselected. When laying out a circuit, treat all enable and address inputs as normal CMOS logic signals and keep analog traces short to reduce coupling from digital switching activity. Confirm the supply-voltage range, control thresholds, channel-breakdown behavior, and maximum analog signal voltage against the manufacturer datasheet before applying signals outside the selected channel. This page organizes the CD4052BCN channel function, package information, sourcing details, pin-compatible alternatives, and application guidance into one engineering reference. It also highlights where replacement qualification requires checking logic levels, supply voltage, signal range, and timing rather than relying on package appearance alone.
CD4052BMT - 20V 4:1 Analog Multiplexer | Texas Instruments
Texas Instruments CD4052BMT is a 20 V, dual 4:1 analog multiplexer with logic-level conversion, packaged in a 16-SOIC. The device routes one of four analog signals to two independently controlled common terminals, supporting 240 ohm on-state resistance. Its CMOS implementation is designed for signal selection in applications where the analog input range extends to the supply voltage. An analog multiplexer is a semiconductor switch that connects multiple signal paths to a common output. The CD4052BMT belongs to the analog switch and multiplexer hierarchy, where it can operate as either a multiplexer or a demultiplexer. In multiplexer mode, two select inputs determine which of four channels reaches each common terminal. In demultiplexer mode, one signal can be routed toward selected channel outputs. This makes the device useful for compact analog signal-distribution and selection systems. The principal features include two 4:1 switching sections, a 20 V signal-handling capability, 240 ohm on-state resistance, and logic-level conversion for the address inputs. The two select inputs allow the device to address four positions across both sections. The 16-SOIC package provides a conventional surface-mount format suitable for industrial, instrumentation, communications, control, and test-and-measurement equipment where analog signals must be selected without introducing an active amplifier stage. The CD4052B family uses CMOS switching structures to provide low off-state leakage and low quiescent current across the specified supply range. Because the common terminals can serve as inputs or outputs, one package can implement either signal selection or signal distribution without changing the basic PCB footprint. Designers should nevertheless verify signal amplitude, control-logic levels, package pin assignments, and off-state behavior against the manufacturer datasheet before applying the device to a new circuit. Typical uses include multimeter input selection, sensor-channel multiplexing, control and measurement systems, communications routing, and analog signal conditioning. In a measurement system, the two common terminals can select paired signal groups, while the two address inputs select one of four channels. The 240 ohm on-state resistance is relevant when driving downstream circuitry, and it should be compared with the input impedance and bandwidth requirements of the next stage. A critical design consideration is the relationship among the analog signal range, supply voltage, and negative supply used by the device. The analog signal must remain within the permitted operating limits, and unused inputs should be connected according to the manufacturer pin-description table. Because the control inputs provide logic-level conversion, their thresholds should be checked against the voltage levels of the controlling microcontroller or logic family. This product page combines the manufacturer device description with application guidance, pinout-location information, drop-in replacement analysis, and a parameter-by-parameter comparison. It is designed to help engineers identify whether the CD4052BMT fits an existing 16-SOIC design and what must be revalidated when changing suppliers, operating voltage, or control logic.
CD4053BCM - Triple 2:1 240Ω Analog Switch | onsemi
The onsemi CD4053BCM is a triple 2:1 analog multiplexer and demultiplexer with three independently controlled switching circuits, 240 Ω ON resistance, and a 16-lead SOIC package. The device routes analog signals according to three binary select inputs and an inhibit control, allowing one shared signal path to replace multiple discrete switches. Its CMOS construction supports low power consumption and low static leakage. An analog multiplexer is a semiconductor switch that connects one of several analog inputs to a common output. The broader hierarchy is analog multiplexer or demultiplexer → analog switch → interface IC → semiconductor. A multiplexer combines signals onto one path, while a demultiplexer separates a shared path into multiple destinations. The CD4053BCM implements both functions through three 2:1 switch sections sharing the same address and inhibit controls. The principal verified features are three switch circuits, a 2:1 configuration, 240 Ω ON resistance, a 16-SOIC package, and CMOS operation. Control inputs A, B, and C select the active route, while INHIBIT provides a common shutdown or isolation function. The manufacturer documentation also identifies low ON impedance and very low OFF leakage current. Typical electrical characteristics are tabulated from −55 °C through 125 °C, supporting industrial and extended-temperature designs. The CD4053BCM is suited to signals that remain within the device’s supply and analog signal limits. Because the control inputs are digital while the switched paths are analog, the address logic may operate from the same supply rails when their voltage thresholds are compatible with the system. Input protection and signal-level behavior depend on the exact supply configuration, so the electrical characteristic tables should be checked for each channel state and operating condition. Typical uses include sensor selection, instrumentation routing, signal multiplexing in test systems, audio channel selection, and general analog signal switching. Three independent 2:1 sections are particularly useful when several paired signals must be selected together. For example, a controller can route differential sensor outputs, alternate measurement paths, or share a converter input among several sources without changing the surrounding board layout. PCB implementation should preserve short analog traces, use a continuous ground plane, and keep switching nodes compact to reduce coupling and parasitic capacitance. Avoid routing high-impedance or sensitive signals directly beside the address and inhibit traces. Decoupling capacitors should be placed close to the supply pins, while unused control inputs must be tied to a defined logic level rather than left floating. This page organizes the verified electrical characteristics, pin information, drop-in alternatives, application guidance, and design considerations into one engineering reference. It also identifies which parameters require confirmation before substitution or redesign, helping engineers shorten component selection and PCB-review time.
CD4053BCN - Triple 2:1 CMOS Multiplexer | onsemi
The onsemi CD4053BCN is a triple single-pole double-throw CMOS analog switch and multiplexer with three selectable 2:1 circuits, an on-resistance of 240 ohms, and a 16-pin PDIP package. Its three-channel architecture lets one device route three related signal paths while sharing common control inputs, reducing component count in signal-routing designs. An analog multiplexer is an interface IC that connects one of multiple internal signal paths to a shared output. The CD4053BCN belongs to the CMOS logic family and uses digital select inputs to control analog signal routing. This places it within the hierarchy of multiplexer, analog switch, interface IC, and semiconductor. The stated on-resistance of 240 ohms is important when the switched signal is sourced from a relatively high-impedance sensor or measurement node. The principal device features are three independent 2:1 circuits, a 240-ohm on-resistance, CMOS construction, and a 16-pin PDIP package. Grouping three circuits into one package can simplify boards that repeatedly route analog, control, or instrumentation signals. The DIP-16 mechanical format also supports through-hole assembly, prototyping, repair, and applications where a socketed component is preferred. Internally, the CD4053BCN combines analog switching with CMOS control logic. Its common select architecture is useful when several related channels should change together, although the exact truth-table relationship should be verified in the manufacturer datasheet before assigning control states. Because it is an analog switch rather than a digital bus transceiver, the selected signal must remain within the device's permitted voltage and current limits. Typical uses include analog sensor selection, test-point routing, signal multiplexing in instrumentation, controlled sharing of multiple signal sources, and embedded measurement systems. A three-channel arrangement can also support phase, channel, or polarity selection where the routed signals are compatible with the switch's electrical characteristics and switching requirements. PCB design should reserve the full 16-pin PDIP footprint and route high-impedance or fast-changing signals away from adjacent digital select lines. Keep input and output traces short, provide a stable ground reference, and follow the manufacturer datasheet for unused inputs, supply decoupling, and maximum signal excursion. Confirm operating voltage and temperature limits before committing to the device in production equipment.
CD4053BMT - 3-Channel 20V Analog Multiplexer | Texas Instruments
The Texas Instruments CD4053BMT is a three-channel, 2:1 analog multiplexer and demultiplexer rated for 20 V operation, with an on-state resistance of 240 ohms and a bandwidth of 30 MHz. The device is packaged in a 16-pin SOIC and includes logic-level conversion, allowing control signals to be referenced to different supply voltages from the switched analog signal. It also provides break-before-make switching behavior for applications requiring isolated signal paths during transitions. An analog multiplexer is a semiconductor switch that connects one common terminal to any one of several channel terminals. A demultiplexer uses the same internal switching structure in the opposite direction, routing a common signal toward a selected output. The CD4053B family provides three independent SPDT paths, placing it in the interface IC and analog-switch hierarchies used for signal routing, instrumentation, communications, test equipment, and data acquisition. The principal features of the CD4053BMT include three independently selectable 2:1 paths, a 240-ohm on-state resistance, and a 30 MHz bandwidth. Its logic-level conversion feature supports control from a supply different from the analog signal supply. Break-before-make operation prevents the common terminal from connecting momentarily to two switched terminals, an important property when the source may present conflicting voltages or when back-to-back switching would create an undesirable transient. Internally, the CD4053B uses CMOS switching elements controlled by address and enable logic. The three channels can route a single source to one of two destinations or distribute one of two sources to a shared output. The 20 V operating capability permits use with higher-voltage analog signals than conventional 5 V or 3.3 V logic-oriented multiplexers, while the 30 MHz bandwidth is useful for moderate-frequency signal paths. Designers must still account for charge injection, off-state leakage, switching transients, and the dynamic behavior of the selected control sequence. Typical applications include data-acquisition front ends, oscilloscope and laboratory signal routing, communications-channel selection, automated test equipment, audio and low-frequency control paths, and industrial systems that switch several analog signals through one shared interface. The triple-SPDT organization is particularly useful when a system must reverse signal direction between source and destination without changing the surrounding PCB footprint. The primary design consideration is ensuring that address and enable transitions cannot momentarily connect conflicting analog sources. Preserve the device's break-before-make behavior, place bypass and signal-conditioning components close to the relevant pins, and use a control sequence that avoids changing an address while the common terminal carries a signal that cannot tolerate a brief disturbance. Verify voltage levels against the logic-level conversion thresholds before using the device with mixed-voltage systems. This product page combines the manufacturer's 20 V, three-channel, 240-ohm and 30 MHz device characteristics with packaging guidance, application fit, and a structured comparison of same-footprint alternatives. It is intended to help engineers evaluate signal integrity, logic compatibility, lifecycle constraints, and replacement decisions before committing a board layout to this multiplexing function.
CD4053BPW - Triple 2:1 CMOS Multiplexer | Texas Instruments
The Texas Instruments CD4053BPW is a three-channel, 2:1 analog multiplexer and demultiplexer rated for a 20 V supply. Each channel uses independent A, B, and C control inputs, while a common inhibit input can disable the selected signal path. The device provides a typical 240 ohm on-state resistance and is packaged in a 16-pin TSSOP for compact surface-mount designs. Its logic-level control interface allows the multiplexer to be driven by compatible digital logic while routing analog signals. An analog multiplexer is a semiconductor switching device that connects one of several signal terminals to a common terminal under digital control. The CD4053B belongs to the CMOS 4000 logic series and implements three independent single-pole, double-throw switches. Each switch can route either of two inputs to its common output, or route the common terminal to either input when used as a demultiplexer. This places the device within the broader hierarchy of analog switches, multiplexers, interface ICs, and signal-routing semiconductors. The principal electrical features are the 20 V supply rating, three independently addressed 2:1 channels, and typical 240 ohm on-state resistance. The A, B, and C address inputs determine which member of each pair is connected, while the inhibit function provides a common shutdown path. Because the channels are independent, one package can route three unrelated analog or digitized signals without sharing an address line. The TSSOP package reduces board area compared with larger leaded and standard small-outline packages. The CD4053B uses CMOS construction to provide low-power operation and high input impedance. This is important when the source impedance is relatively high or when the mux feeds a sensitive downstream circuit. The inhibit input can also simplify measurement-system control by isolating selected nodes during setup or test. Signal integrity still depends on layout: input and output routing should be short, the supply must remain stable, and unused control inputs should not float during transitions. Typical applications include routing analog sensor outputs into an ADC, selecting audio or video paths, sharing instrumentation channels, building sample-and-hold systems, and distributing control signals through multiplexed buses. The device is especially useful when multiple analog sources must reach one converter or measurement instrument through a limited number of external connections. Each channel can select a separate pair of sources because the address controls are separate rather than multiplexed through a shared binary bus. A key design consideration is that a multiplexer does not amplify or buffer signals. Insertion loss, on-state resistance, bandwidth, off-state leakage, and charge injection can affect accuracy, especially with high-impedance sources or slow sampling systems. Keep the signal path short, provide a stable bypass connection at the supply pins, and ensure address transitions occur outside the ADC acquisition window. Consult the pin-description and timing tables in the manufacturer datasheet before assigning control logic. This page combines the device architecture, application guidance, pin-verification considerations, and a parameter-focused comparison framework. It is intended to help engineers select the correct multiplexing approach, plan PCB routing, evaluate replacement risk, and distinguish the CD4053BPW from related CD4000-series switch and multiplexer devices before committing a design to production.
CD4056BEX - CMOS LCD Driver, 14-DIP | Harris Corporation
Harris Corporation CD4056BEX is a CMOS liquid-crystal display driver integrated circuit packaged in a 14-pin dual inline package. The device is associated with the CD4056 display-driver function and is identified in the CD4056BEX documentation as an active part. Its 14-DIP package, measuring 0.300 inch across the lead row spacing or 7.62 mm, supports conventional through-hole PCB assembly and socketed prototyping. A CMOS liquid-crystal display driver is a logic-family device that accepts digital control information and produces the electrical drive signals required by compatible LCD segments. Within the broader semiconductor hierarchy, the CD4056BEX belongs to CMOS logic, interface ICs, and display-driver ICs. Its primary role is signal generation and display-segment control rather than computation, analog amplification, or power conversion. The principal feature visible in the manufacturer documentation is the combination of a CMOS display-driver function, active device status, and a 14-DIP package. The suffix EX denotes the manufacturer's extended-temperature ordering option, while the B family designation identifies the CD4056B implementation. The family documentation identifies the device category as a CMOS liquid-crystal display driver, making it appropriate for designs using compatible segmented LCD displays. The CD4056BEX architecture is implemented in CMOS logic, allowing digital control signals to interface with LCD segment structures while limiting the device to the logic-level voltage range specified by the family documentation. Because the display characteristics depend on the selected LCD, supply voltage, operating environment, and external configuration, the exact drive voltage, segment count, output configuration, and timing limits must be confirmed in the manufacturer datasheet before schematic approval. Typical uses include digital instrument panels, counters, industrial panel meters, small monochrome LCD modules, and embedded control systems that require a dedicated display-driver IC. In each case, the LCD glass and segment arrangement determine whether the CD4056BEX is suitable. Designers should verify segment count, common and segment electrode topology, bias requirements, and logic compatibility rather than selecting the driver from package size alone. A critical design practice is to compare every LCD electrode with the manufacturer's pin-description and truth-table information before routing the PCB. Supply bypassing, unused inputs, and display contrast should be evaluated together because the LCD threshold voltages, rather than ordinary digital logic levels alone, determine whether segments illuminate reliably. This page combines the identified CD4056BEX package and lifecycle information with engineering guidance for LCD interface design, pin verification, PCB implementation, and component sourcing. It also distinguishes documented facts from parameters that must be checked against the manufacturer datasheet, helping engineers plan the display subsystem before layout begins.
CD4056BFX - 16-Pin CMOS Counter and LCD Driver | Texas Instruments
The Texas Instruments CD4056BFX is a CMOS binary counter and liquid-crystal display decoder with four decoded outputs, operating from a 3 V to 18 V supply in a 16-pin through-hole ceramic DIP package. The device also includes a high-count output, clock inputs, reset control, and display-disable control. Its 16-pin DIP footprint supports conventional through-hole PCB layouts and simplifies replacement in older counter or display-driver designs. A binary counter is a sequential digital circuit that divides an input clock into a corresponding binary value. An LCD decoder is a logic circuit that converts binary counter states into control signals for multiplexed liquid-crystal displays. The CD4056B combines both functions in one CMOS integrated circuit, placing it in the hierarchy of counter logic, display decoder, interface IC, and digital semiconductor. Principal operating characteristics include a 3 V to 18 V supply range, low static current, propagation-delay and transition-time parameters, and decoded outputs suitable for driving display-control logic. The CD4056BFX is identified in military-temperature-grade listings and uses a through-hole package with 16 terminals. Its counter and decoder functions are useful when a design requires cascaded counting stages, direct display decoding, or a carry output for extending the count beyond the internal four-bit state. The device operates from the same supply used by many legacy CMOS logic systems, allowing 5 V and 15 V implementations without a level-shifting stage. CMOS construction provides high noise immunity and low static power dissipation, although dynamic power and propagation delay rise as supply voltage and operating frequency increase. The clock, clock-inhibit, reset, and display-disable inputs provide the basic controls required for synchronous counting and display management. Typical uses include laboratory counters, digital time and frequency indicators, industrial panel meters, event counters, and educational timing equipment. In each case, the decoded outputs reduce the logic required to select display segments or otherwise control the display system. Cascading counters can use the carry output to implement additional count ranges when one four-bit CD4056 stage is insufficient. For a new through-hole design, preserve the manufacturer's specified pin functions and route the reset and display-disable inputs so they cannot float during power transitions. Confirm timing margin from the datasheet before operating near the maximum clock rate. Confirm supply sequencing, maximum input voltage, and unused-input states before releasing a production design.
CD4067BE - 20V 16:1 Analog Multiplexer | Texas Instruments
The Texas Instruments CD4067BE is a 20 V, 16:1, single-channel CMOS analog multiplexer with internal address decoding, packaged in a 24-pin PDIP. The verified distributor listing identifies one switch circuit, 16 channels, 240 ohm maximum on-state resistance, and a 3 V to 18 V supply range. It routes one common analog terminal to any of 16 channel terminals selected by four binary address inputs. A strobe input can inhibit the selected connection. This makes the device useful for sensor selection, data acquisition, instrumentation, test systems, and control systems where multiple analog signals must share a limited number of converter or processing inputs. An analog multiplexer is a digitally controlled routing component that connects one common signal to one selected member of a larger signal group. A 16:1 multiplexer provides sixteen input choices through four binary select lines, reducing wiring and conserving converter inputs. CMOS implementations are useful where low static power, wide supply-voltage operation, and bidirectional signal paths are desired. The CD4067BE can also be used as a demultiplexer by exchanging the signal-flow orientation described in the manufacturer documentation, although its primary function is analog multiplexing. The key verified features are 16:1 channel selection, four-level digital addressing, a 240 ohm maximum on resistance, a 20 V maximum supply rating, and operation from 3 V to 18 V according to the available technical sources. The selected channel is controlled by A, B, C, and D address inputs, while the inhibit/strobe function provides channel disabling. Because the on resistance contributes to signal loss and thermal behavior, the source impedance and downstream input impedance should be evaluated together in precision measurement circuits. The internal address decoder reduces the external control logic required to select one of 16 channels. The device is therefore suitable for systems in which a microcontroller or other digital controller must scan resistive, capacitive, voltage, or current-derived analog inputs. Its 24-pin PDIP package is intended for through-hole PCB assembly, while the CD4067B family provides the functional platform and the manufacturer product page supplies the authoritative family information. Typical uses include multiplexed sensor interfaces, automated test equipment, industrial control panels, data-acquisition systems, and analog signal routing between shared measurement circuitry and multiple external sources. When using the CD4067BE, verify signal amplitudes against the supply rails, account for on-resistance error, provide adequate input and output drive paths, and keep sensitive routing away from high-impedance nodes. The verify data does not provide complete timing, leakage, temperature, or absolute-maximum tables, so those values should be confirmed in the manufacturer datasheet before production release.
CD4067BM - 20V 16:1 CMOS Analog Multiplexer | Texas Instruments
The Texas Instruments CD4067BM is a 20 V, single-channel, 16:1 CMOS analog multiplexer or demultiplexer with a 24-pin SOIC package. It provides 240 ohms on-resistance at the distributor-listed operating point, low off leakage current, internal address decoding, and digital selection of one common terminal to any of 16 channel terminals. The device is suited to analog signal routing where a controller must select among multiple sensors, measurement inputs, or signal lines. An analog multiplexer is a switching component that connects one common signal path to one selected member of a larger channel group. A demultiplexer uses the same internal switch network in the opposite signal direction, routing a common input to a selected output. The CD4067B belongs to the CMOS analog-switch family within logic and interface integrated circuits. Its internal address decoder converts four binary select inputs into one of 16 channel states, simplifying control from a microcontroller or digital logic system. Key verified characteristics include a 20 V maximum supply-oriented device rating, 16:1 multiplexing, one analog circuit, and 240 ohms on-resistance as listed by DigiKey. The manufacturer describes low on impedance, low off leakage current, and relatively constant on-resistance over the selected signal range. The four address inputs and inhibit control provide deterministic channel selection, while the common and channel terminals carry the analog signal. Exact voltage, leakage, timing, and temperature limits beyond the supplied verified data are not asserted here. Because the CD4067BM is a CMOS analog switching device, its performance depends on supply voltage, control-signal levels, signal amplitude, leakage, channel resistance, and the impedance presented by the selected source or destination. The common terminal and channel terminals should be treated as analog nodes rather than ordinary digital outputs. Designers should account for off leakage and on-resistance when measuring high-impedance sources, and should ensure that control states remain valid during power transitions. Typical uses include sensor selection, instrumentation signal routing, test-equipment channel selection, data-acquisition systems, and industrial control interfaces. For a sensor front end, the four select lines can choose one of 16 inputs while the inhibit function provides an effective disconnected state. The same topology can be used in reverse when a source must be routed to one of multiple outputs. The analog bandwidth and switching-time limits should be checked against the signal path requirements. A practical design consideration is to keep the selected channel traces short and place suitable bypassing close to the supply pins. The mux should be selected according to source impedance and measurement accuracy: high-impedance sensors may be more sensitive to leakage, while low-impedance drive paths emphasize on-resistance and switching behavior. This page combines verified manufacturer and distributor information, structured application guidance, and source-linked design cautions rather than extrapolating unprovided electrical limits.
CD4067BPW - 16:1 CMOS Analog Multiplexer | Texas Instruments
Texas Instruments CD4067BPW is a single-channel 16:1 CMOS analog multiplexer and demultiplexer with a typical ON resistance of 125 ohms, a maximum specified value of 240 ohms, and operation from 3 V to 18 V in a 24-pin TSSOP package. It routes one common analog terminal to any of 16 channels through four binary address inputs. An analog multiplexer is a semiconductor switching network that combines multiple signal paths into a shared input or output. The CD4067B belongs to the CMOS analog switch, multiplexer, and demultiplexer hierarchy, where its bidirectional switch paths can distribute analog signals in either direction. On-chip binary decoding reduces the external control logic required to select one of 16 channels, making the device useful for data acquisition, test systems, and signal-routing equipment. The principal electrical features include a 20 V maximum supply rating, 3 V to 18 V operating supply range, 125-ohm typical ON resistance, and 240-ohm maximum ON resistance. The typical ON resistance falls to 5 ohms when VDD minus VSS is 15 V. Typical quiescent power dissipation is listed as 0.2 microwatts at a 10 V supply, while a distributor specification lists quiescent current at 100 microamperes. The CD4067B uses four address inputs to decode one of 16 channels. A common inhibit and an enable control govern whether the selected path is active. Its CMOS switch architecture supports bidirectional signal routing, allowing the same device to function either as a multiplexer or a demultiplexer. The result is a compact analog routing element for systems that need more input or output channels than the controlling converter directly provides. Typical applications include multiplexed sensor acquisition, automated test-equipment routing, data-converter channel selection, sample-and-hold systems, and industrial control interfaces. The device is especially useful when several low-bandwidth or moderate-bandwidth analog signals must share a downstream ADC, amplifier, measurement front end, or communications interface. Designers should verify signal amplitude against the supply rails, account for ON resistance when calculating source-load attenuation, and use the enable and inhibit controls to prevent unintended channel selection. Decoupling capacitors should be placed close to the supply pins, while sensitive signals require short, guarded routing to minimize coupling into the high-impedance control paths. This product page combines the manufacturer and distributor specifications with practical routing guidance, pin-location guidance, package details, and a parameter-by-parameter comparison of documented drop-in alternatives for faster engineering selection.