بەرهەمەکان (5,100+)

CS4222-BS - 20-Bit Stereo Audio Codec | Cirrus Logic
CS4222-BS

CS4222-BS - 20-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4222-BS is a 20-bit stereo audio codec with volume control, integrating stereo analog-to-digital and stereo digital-to-analog converters in a 28-pin SSOP package. The device operates from a single +5 V supply and uses delta-sigma conversion techniques for its stereo conversion paths. These core characteristics make the CS4222-BS a monolithic audio interface IC for systems that require both digital-to-analog playback and analog-to-digital recording functions. An audio codec is a mixed-signal semiconductor that converts audio between digital data and analog voltage signals. Within the broader integrated-circuit hierarchy, a codec belongs to the interface and audio-converter class, combining an ADC, DAC, volume control, and associated analog circuitry in one device. The CS4222 family therefore reduces the number of separate converters required in a stereo audio system while simplifying synchronization and analog-output implementation. The verified manufacturer information identifies a 20-bit resolution, four-channel audio configuration, delta-sigma conversion architecture, and single +5 V operation. Its on-chip output buffer produces differential line-level outputs for the left and right channels. The documented nominal output is 2.83 Vpp, or 1 Vrms, for each single-ended output at full-scale digital input, with a 2.3 V common-mode voltage. The corresponding differential signal is 5.66 Vpp, or 2 Vrms). The CS4222-BS also incorporates volume control, allowing playback amplitude to be adjusted within the codec rather than solely through external analog gain stages. This integration can simplify system architecture, but the exact control interface, supported audio data formats, converter performance, clock requirements, and recommended external networks must be confirmed from the manufacturer datasheet before layout or firmware development. Those detailed values are not present in the supplied verified extracts and are therefore not inferred here. Typical implementation roles include legacy stereo multimedia systems, audio capture and playback modules, digital mixing equipment, and embedded audio subsystems requiring separate transmit and receive paths. In such equipment, the codec can accept digital audio at its ADC input and provide amplified analog left and right outputs for external coupling, headphone, or line-stage circuitry. Its differential outputs may offer better rejection of common-mode noise than single-ended outputs when paired with a balanced receiver. A critical design consideration is that the codec cannot be evaluated from resolution alone. Designers should verify the complete interface protocol, sample-rate range, clocking scheme, analog input range, output-load capability, power sequencing, and external component recommendations in the manufacturer datasheet. The documented 10 kΩ output loading must also be respected because heavier loads can alter output level and distortion even if the nominal operating voltage remains correct. This product page consolidates verified CS4222-BS specifications, distributor availability references, package information, and engineering guidance into one searchable source. It also separates documented data from unresolved parameters, helping engineers avoid unsupported assumptions while evaluating this audio codec for a new or legacy PCB design.

RFQ پەیوەندی
CS4222-DS - 20-Bit Stereo Audio Codec | Cirrus Logic
CS4222-DS

CS4222-DS - 20-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4222-DS is a 20-bit stereo audio codec with volume control, integrating analog-to-digital and digital-to-analog conversion in a 28-pin SSOP package. The device operates from a single +5 V supply and supports four-channel volume control according to the DigiKey product listing. Its delta-sigma conversion architecture, onboard output buffering, and differential line-level outputs make it suitable for multichannel consumer audio, sound-card, mixer, and digital-audio-interface equipment. An audio codec is an interface IC that converts analog sound into a digital bitstream and reconstructs digital audio into analog signals. In the broader semiconductor hierarchy, a codec belongs to interface ICs and audio codecs, combining mixed-signal converters with digital control and analog output circuitry. The CS4222 therefore provides both signal conversion and system-level volume management rather than operating only as a conventional digital interface controller. The CS4222 provides 20-bit stereo conversion and uses delta-sigma conversion techniques. Its on-chip buffer amplifier generates differential outputs capable of driving 10 kW loads, as stated in the CS4222 datasheet. Each output produces a nominal 2.83 Vpp, or 1 Vrms, signal for a full-scale digital input. The common-mode voltage is 2.3 V, and the two sides of each differential channel can represent a 5.66 Vpp, or 2 Vrms, differential signal. The single-supply architecture simplifies analog system design around a conventional +5 V rail. Digital control and analog conversion are consolidated in one IC, reducing the number of separate converters required in a stereo design. The integrated volume-control function can simplify control layout in systems that need programmable attenuation between digital sources and line-level outputs, although software control details and supported register values must be confirmed in the manufacturer datasheet before implementation. Typical uses include stereo sound cards, compact multimedia systems, powered speakers, home-audio preamplifiers, mixer inputs, USB or FireWire audio interfaces, and industrial monitoring equipment. The differential outputs are particularly useful when the downstream analog stage benefits from common-mode rejection and reduced susceptibility to ground-borne noise. Board-level filtering and grounding remain important because digital activity from the codec can couple into sensitive analog paths if the layout does not separate converter and output-current return paths. Designers should follow the recommended external component network shown in the Cirrus Logic CS4222 datasheet and preserve the differential output topology. Input and output decoupling should be placed close to the appropriate supply and signal pins, while analog and digital return currents should be routed carefully on mixed-signal boards. The 28-pin SSOP footprint is not interchangeable with leaded or differently pin-counted codecs without a PCB redesign. This product page consolidates verified distributor pricing, package information, converter performance, application guidance, and sourcing data. It also distinguishes verified CS4222-DS facts from parameters that still require confirmation, avoiding unsupported claims about equivalent codecs, exact pin functions, lifecycle guarantees, or unreported electrical limits.

RFQ پەیوەندی
CS4222-DSZ - 20-Bit Stereo Codec | Cirrus Logic | 4-Channel
CS4222-DSZ

CS4222-DSZ - 20-Bit Stereo Codec | Cirrus Logic | 4-Channel

Cirrus Logic CS4222-DSZ is a 20-bit stereo audio codec with four channels, integrated stereo analog-to-digital and stereo digital-to-analog converters, and a single +5 V power supply. The device uses delta-sigma conversion techniques and is housed in a 28-pin SSOP package. Its four-channel architecture supports simultaneous stereo ADC and DAC functions, while its audio volume control simplifies level management in mixed-signal audio equipment. An audio codec is a mixed-signal interface IC that converts audio between analog and digital representations. In the signal hierarchy, a codec combines an ADC, DAC, volume control, and associated interface functions into one device. The CS4222-DSZ belongs to the audio codec category within interface ICs, providing a compact bridge between analog audio circuitry and a digital audio system. The CS4222-DSZ provides 20-bit stereo conversion, two analog input channels, two analog output channels, and integrated volume control. It operates from a single +5 V supply, which can simplify analog power planning in equipment that does not use a negative analog rail. Delta-sigma conversion supports digital filtering of quantization noise, helping place the codec between source circuitry and downstream audio processing. As a four-channel part, the CS4222-DSZ can support a stereo playback and recording architecture. The integrated volume-control function can reduce the number of separate analog gain stages required in basic audio paths. Its interface and control details should be checked in the manufacturer datasheet before fixing clock, format, register, and digital-interface settings on the PCB. Typical uses include professional and consumer audio interfaces, multimedia equipment, sound cards, digital mixing equipment, and embedded audio systems. The single +5 V architecture is particularly useful where analog circuitry already operates around that rail. Systems requiring a different power plan may prefer another codec with matching supply and interface requirements. PCB design should preserve short, controlled analog paths and provide the decoupling and layout shown in the manufacturer datasheet. Keep analog input and output routing away from high-speed digital signals, use a continuous ground reference plane, and place bypass capacitors close to their supply pins. Confirm pin assignments and exposed connections before routing because the public product listing does not reproduce the complete pin-description table. This page organizes the verified product identity, package, converter architecture, sourcing data, engineering guidance, and confirmed cross-reference candidate for engineers evaluating the CS4222-DSZ. A qualified replacement should be checked against pinout, supply voltage, audio format, clocking, control registers, performance, and lifecycle requirements before PCB release.

RFQ پەیوەندی
CS4223-BS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic
CS4223-BS

CS4223-BS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic

The Cirrus Logic CS4223-BS is a 24-bit, 105 dB dynamic-range stereo audio codec with integrated analog-to-digital and digital-to-analog converters, operating from a single +5 V supply in a 28-pin SSOP package. The converter uses delta-sigma conversion techniques, and the CS4223-BS configuration is identified by distributor data as a stereo codec without volume control. An audio codec is an interface IC that converts analog sound signals into digital data and reconstructs digital audio into analog signals. A codec belongs to the broader interface IC and signal-conversion hierarchy, combining an ADC, DAC, digital audio interface, clocking, and associated analog support functions. This integration reduces the number of external converters required in CD players, DVD systems, automotive audio equipment, consumer electronics, and other stereo-audio systems. Key features include 24-bit audio resolution, a specified signal-to-noise ratio of 105 dB, stereo ADC and DAC channels, delta-sigma conversion, and single +5 V operation. The 105 dB rating provides a concrete measure of the converter noise floor relative to the full-scale signal, while 24-bit words provide sufficient numerical resolution for professional and consumer audio paths. The 28-pin SSOP surface-mount package supports compact, board-level implementations. The device accepts digital audio through its serial audio interface and uses external clocking and synchronization signals for deterministic conversion. Delta-sigma architectures reduce the need for high-precision conversion components inside the signal path, although board layout, grounding, supply decoupling, and clock signal integrity remain important. Analog and digital sections should be routed to minimize coupling from switching nodes and high-current return paths. Typical applications include stereo CD and DVD audio, home-theater equipment, automotive sound systems, digital mixing consoles, multimedia appliances, and other systems requiring simultaneous analog-to-digital and digital-to-analog conversion. The CS4223-BS is appropriate where a 24-bit stereo codec and 105 dB dynamic range are required from one +5 V supply. Because the verified listing identifies this -BS option as lacking volume control, systems requiring an internal volume-control function should verify that requirement before design-in. For a new PCB, place all decoupling capacitors close to their supply pins, use a low-inductance ground reference, and route clock and data traces away from analog inputs. The +5 V rail should be filtered if nearby switching converters create ripple or high-frequency noise. Legacy-product risk should also be evaluated because the available cross-reference data labels the CS4223 family as obsolete and recommends consulting manufacturer lifecycle information before committing to a production run.

RFQ پەیوەندی
CS4223-KS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic
CS4223-KS

CS4223-KS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4223-KS is a 24-bit, 105 dB stereo audio codec with integrated analog-to-digital and digital-to-analog converters, supplied in a 28-pin SSOP package. The device uses delta-sigma conversion, operates from a single +5 V power supply, and provides a 24-bit serial audio interface. It combines bidirectional stereo audio conversion in one package, reducing the number of separate converters required in a digital audio system. An audio codec is an interface integrated circuit that converts between analog audio signals and digital audio data. The CS4223 belongs to the broader codec hierarchy, which includes digital-to-analog converters, analog-to-digital converters, audio interface ICs, and signal-conversion semiconductors. In this device, stereo delta-sigma ADC and DAC sections share the same integrated package and serial digital audio connection. The primary verified performance features are 24-bit resolution, 105 dB dynamic range, stereo conversion, a 24-bit serial interface, operation from one +5 V supply, and low power consumption. These characteristics suit professional audio equipment, multichannel sound systems, consumer audio electronics, industrial monitoring, and embedded audio platforms where analog audio must be captured or reproduced using a digital signal path. The CS4223/4 family uses delta-sigma conversion techniques, allowing analog stereo signals and digital audio data to share a compact mixed-signal package. The CS4223-KS distributor description identifies this specific option as a 24-bit audio codec without volume control. That distinction is important because volume-control functionality must be verified in the manufacturer documentation before assuming equivalent behavior between CS4223 and CS4224 variants. Typical circuit roles include receiving digital audio data for conversion to stereo analog outputs and accepting stereo analog inputs for conversion to digital data. System designers must provide suitable input and output filtering, stable analog supply and ground distribution, correct serial-interface timing, and signal routing appropriate to the codec's application. The single +5 V supply simplifies rail planning, although analog and digital return-current paths still require careful PCB partitioning. Before layout, compare the exact CS4223-KS pinout and electrical limits against the selected schematic revision. The public search results identify the package as 28-pin SSOP, but they do not provide a complete verified pin table in the supplied data; no pin names are therefore inferred here. Likewise, sample rate, clock range, analog input and output range, and recommended external component values require confirmation in the manufacturer datasheet. This product page consolidates the verified distributor descriptions, manufacturer-family data, package information, and practical selection considerations for the CS4223-KS. It separates confirmed specifications from unavailable parameters and focuses comparison on genuine same-package family options rather than presenting unrelated codecs as drop-in replacements.

RFQ پەیوەندی
CS4223-KSR - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic (Tape & Reel)
CS4223-KSR

CS4223-KSR - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic (Tape & Reel)

Cirrus Logic CS4223-KSR is a 24-bit, 105 dB stereo audio codec with integrated analog-to-digital and digital-to-analog converters, supplied in a 28-pin SSOP package. The device uses delta-sigma conversion, operates from a single +5 V power supply, and provides a 24-bit serial audio interface. It combines bidirectional stereo audio conversion in one package, reducing the number of separate converters required in a digital audio system. An audio codec is an interface integrated circuit that converts between analog audio signals and digital audio data. The CS4223 belongs to the broader codec hierarchy, which includes digital-to-analog converters, analog-to-digital converters, audio interface ICs, and signal-conversion semiconductors. In this device, stereo delta-sigma ADC and DAC sections share the same integrated package and serial digital audio connection. The primary verified performance features are 24-bit resolution, 105 dB dynamic range, stereo conversion, a 24-bit serial interface, operation from one +5 V supply, and low power consumption. These characteristics suit professional audio equipment, multichannel sound systems, consumer audio electronics, industrial monitoring, and embedded audio platforms where analog audio must be captured or reproduced using a digital signal path. The CS4223/4 family uses delta-sigma conversion techniques, allowing analog stereo signals and digital audio data to share a compact mixed-signal package. The CS4223-KSR distributor description identifies this specific option as a 24-bit audio codec without volume control. That distinction is important because volume-control functionality must be verified in the manufacturer documentation before assuming equivalent behavior between CS4223 and CS4224 variants. Typical circuit roles include receiving digital audio data for conversion to stereo analog outputs and accepting stereo analog inputs for conversion to digital data. System designers must provide suitable input and output filtering, stable analog supply and ground distribution, correct serial-interface timing, and signal routing appropriate to the codec's application. The single +5 V supply simplifies rail planning, although analog and digital return-current paths still require careful PCB partitioning. Before layout, compare the exact CS4223-KSR pinout and electrical limits against the selected schematic revision. The public search results identify the package as 28-pin SSOP, but they do not provide a complete verified pin table in the supplied data; no pin names are therefore inferred here. Likewise, sample rate, clock range, analog input and output range, and recommended external component values require confirmation in the manufacturer datasheet. This product page consolidates the verified distributor descriptions, manufacturer-family data, package information, and practical selection considerations for the CS4223-KSR. It separates confirmed specifications from unavailable parameters and focuses comparison on genuine same-package family options rather than presenting unrelated codecs as drop-in replacements.

RFQ پەیوەندی
CS4224-BS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic
CS4224-BS

CS4224-BS - 24-Bit 105dB Stereo Audio Codec | Cirrus Logic

Cirrus Logic CS4224-BS is a 24-bit, 105 dB stereo audio codec with integrated analog-to-digital and digital-to-analog converters and volume control in a 28-pin SSOP package. The device combines a stereo 24-bit ADC and stereo 24-bit DAC, uses delta-sigma conversion techniques, and operates from a single +5 V power supply. An audio codec is a mixed-signal semiconductor that converts signals between the analog and digital domains. The CS4224 family belongs to the codec hierarchy, which includes audio codecs, interface ICs, data converters, and broader signal-processing semiconductors. Its integrated ADC and DAC reduce the number of external conversion components needed in professional audio, communications, and digital audio equipment. Key features include 24-bit conversion resolution, a stated 105 dB signal-to-noise characteristic, integrated volume control, stereo conversion channels, and operation from one +5 V supply. These characteristics make the device appropriate for audio capture and playback systems where a compact, dedicated codec is preferable to discrete converters. Its integrated volume function can simplify analog-level control, although system-level gain planning must prevent overload and preserve headroom. The CS4224-BS uses delta-sigma conversion to implement the analog-to-digital and digital-to-analog functions. According to the Cirrus Logic CS4224 family datasheet, the architecture is designed for high-performance 24-bit audio operation in a single integrated device. Exact interface timing, clock requirements, analog performance, input and output topology, and recommended external component values must be confirmed against the manufacturer datasheet before layout or firmware is finalized. Typical uses include digital audio consoles, multimedia and communications equipment, sound-card signal paths, and other stereo audio systems requiring simultaneous analog capture and playback. In such systems, the codec can sit between analog microphones or line-level sources and a digital audio processor, while digital program audio is converted back to analog for monitoring or amplification. Designers should follow the manufacturer pinout and reference connection exactly, paying particular attention to analog grounding, supply decoupling, clock routing, and the treatment of unused inputs and outputs. Because the verified product listing identifies the CS4224-BS as a 28-SSOP and describes it as a 24-bit, 105 dB codec with volume control, those details can be cited confidently; additional electrical values remain subject to the datasheet. This page consolidates the verified distributor identity, pricing reference, package information, family-level description, drop-in evidence, and practical design guidance. It also distinguishes confirmed specifications from parameters that still require verification, providing a more useful engineering record than an uncontextualized distributor listing.

RFQ پەیوەندی
CS4226-BQ 6-Channel Surround Sound Codec | Cirrus Logic
CS4226-BQ

CS4226-BQ 6-Channel Surround Sound Codec | Cirrus Logic

The Cirrus Logic CS4226-BQ is a six-channel surround-sound audio codec with stereo analog-to-digital conversion, six digital-to-analog channels, and independent volume control, supplied in a 44-pin TQFP package measuring 10 mm by 10 mm. It operates from a 4.75 V to 5.25 V supply and is specified across a -40 °C to +85 °C temperature range. The supported digital interfaces include I2C and SPI, while the verified device data identifies a sampling-frequency range of 4 kHz to 50 kHz. An audio codec is a mixed-signal integrated circuit that converts between analog audio signals and digital audio data. Within the semiconductor hierarchy, it is an interface IC and audio codec rather than a conventional amplifier or standalone converter. The CS4226 combines delta-sigma conversion stages, a stereo ADC path, six DAC channels, independent channel-volume functions, and digital control into one device for multichannel audio systems. The principal feature of the CS4226-BQ is its six-channel DAC architecture with independently selectable volume control for each output. This allows a multichannel system to balance individual speaker or surround channels in software. The device also provides a stereo ADC, an I2C/SPI control interface, and a frequency range suitable for conventional digital audio streams. Its single 5 V operating region simplifies analog and digital supply planning when the rest of the system uses a compatible rail. The CS4226 family uses delta-sigma conversion techniques rather than the R-2R ladder architecture associated with some high-end audio converters. Delta-sigma converters integrate a noise-shaping and digital-filtering process into the conversion path. The CS4226 datasheet identifies the component as a surround-sound codec, and its control-port listings include SCL/CCLK, SDA/CDOUT, AD1/CDIN, AD0/CS, LRCK, SCLK, and the six DAC data inputs and outputs. Typical uses include surround-sound decoding in home theater equipment, multichannel amplifier systems, active speaker electronics, AV receivers, and other equipment requiring several independently controlled digital audio outputs. A stereo source can be routed into the codec's digital conversion and processing architecture, while separate digital streams or channels can be assigned to the six DAC outputs. The device can also be paired with external amplifiers when the required output power exceeds the codec's signal-routing role. Designers should treat the CS4226-BQ as a mixed-signal device and preserve clean separation between analog and digital return currents. The 5 V supply must remain within the specified 4.75 V to 5.25 V range, and unused analog, digital, and control resources should be terminated according to the manufacturer datasheet. PCB layout, grounding, clocking, and supported data-format details must be confirmed from the complete CS4226 documentation before a production design is released. This page consolidates verified distributor and datasheet information, organizes the commercial and technical selection questions engineers commonly need, and explicitly identifies parameters that require confirmation from the manufacturer documentation. That distinction is important because the public search results verify the core codec identity, package, supply range, temperature range, interface types, and sampling range but do not expose every electrical, timing, pin-level, and lifecycle detail.

RFQ پەیوەندی
CS4226-BQZ 6-Channel Audio Codec | Cirrus Logic
CS4226-BQZ

CS4226-BQZ 6-Channel Audio Codec | Cirrus Logic

The Cirrus Logic CS4226-BQZ is a single-chip surround-sound audio codec with one stereo analog-to-digital converter, six digital-to-analog converters, and independently selectable volume control for every DAC channel. It operates from a single +5 V supply and is packaged in a 44-lead TQFP measuring 10 mm by 10 mm. The converters use delta-sigma conversion techniques, integrating the ADC, multi-channel DAC outputs, and output attenuation into one device. An audio codec is a mixed-signal integrated circuit that converts between analog audio and digital audio data. Its position in the signal chain is the interface between analog input circuitry and a digital audio processor. A codec may also include clocking, digital audio interfaces, gain control, and format conversion. The CS4226 belongs to the broader codec family and the Cirrus Logic multichannel audio converter product class. The principal feature of the CS4226-BQZ is its six-channel DAC arrangement. Each of the six digital-to-analog channels has its own volume control, allowing a system designer to attenuate individual surround channels without implementing six separate external attenuator networks. The single stereo ADC supports two analog input channels, making the codec suitable for systems that require both multichannel playback and stereo capture. The device uses delta-sigma conversion techniques for its stereo ADC and six DAC channels. This architecture supports compact implementation of multiple high-resolution audio outputs in a single package. The independent channel attenuation function is particularly useful in surround-sound systems where front, rear, center, subwoofer, and auxiliary channels may require different output levels. Typical applications include multichannel home theater receivers, surround-sound amplifier boards, DVD and Blu-ray player analog output stages, set-top boxes, digital television audio boards, and other consumer audio equipment requiring multiple DAC channels. Because the package exposes a substantial number of analog, digital, power, and ground connections, careful partitioning of analog and digital return currents is essential. Design the board so the analog output stages and passive components remain physically separated from high-current switching nodes and digital clock lines. Use the pin-description table in the manufacturer datasheet when assigning PCB nets, and confirm bypass-capacitor placement, analog ground handling, and output-load requirements against the device's recommended application circuit. This page organizes the available CS4226-BQZ technical information with engineering-focused design notes, specification markers for unavailable values, and sourcing guidance. It is intended to help engineers evaluate the codec before committing a 44-lead mixed-signal layout.

RFQ پەیوەندی
CS4226-KQZ 6-Channel Surround Sound Codec | Cirrus Logic
CS4226-KQZ

CS4226-KQZ 6-Channel Surround Sound Codec | Cirrus Logic

Cirrus Logic CS4226-KQZ is a single-chip surround sound audio codec with one stereo analog-to-digital converter and six digital-to-analog converter channels. It uses delta-sigma conversion techniques and operates from a +5 V supply. The device is packaged in a 44-pin TQFP measuring 10 mm by 10 mm, making it suitable for multichannel consumer audio, home-theater, automotive entertainment, and multimedia systems where several digital playback channels and one stereo capture path are required. The CS4226 is an audio codec rather than a general-purpose DSP. In a typical design, its digital audio interface connects to a host controller or audio processor, while the ADC path accepts a stereo analog input. The six DAC outputs provide independently controlled digital playback channels for surround-sound systems. According to the manufacturer description, the six DAC channels include independent volume control, allowing a system designer to establish different output levels for individual channels without implementing a separate external attenuator for every channel. Delta-sigma conversion is the key architectural feature of the CS4226. This approach converts quantized audio data using continuous-time and discrete-time filtering techniques, producing a digital-to-analog output suitable for multichannel audio reproduction. The same chip combines conversion and volume-control functions, reducing the number of separate audio ICs required in a surround-sound design. Compared with a system using discrete converter packages, the integrated codec can simplify board partitioning and reduce the number of interconnects. The CS4226-KQZ is identified in distributor listings as a six-channel audio volume-control and surround-sound codec in a 44-TQFP package. Its primary role is to accept digital audio data, perform conversion, and provide multiple analog output channels with independent level control. The exact sample-rate range, DAC and ADC resolution, analog input range, output signal-to-noise ratio, clock requirements, and recommended external component values should be confirmed in the Cirrus Logic CS4226 datasheet before finalizing a new PCB design. Because the codec integrates both conversion and channel-level control, board-level implementation depends on correct analog grounding, stable supply bypassing, and compliant routing of the digital and analog signals. Place the required decoupling capacitors close to the supply pins, keep analog output routing away from high-current digital paths, and follow the manufacturer’s reference layout for the exposed package and signal-return connections. Do not infer a replacement’s suitability from its codec description alone; verify pin assignment, clock interface, supply requirements, and channel mapping. This page consolidates the confirmed CS4226-KQZ product identity, package information, sourcing links, and design considerations into an engineering-oriented component reference. It also distinguishes confirmed manufacturer and distributor information from specifications that must be taken directly from the CS4226 datasheet.

RFQ پەیوەندی
CS4280-CM Audio Volume Control IC | Cirrus Logic | PCI
CS4280-CM

CS4280-CM Audio Volume Control IC | Cirrus Logic | PCI

Cirrus Logic CS4280-CM is a one-channel audio volume-control and power-management IC for PCI audio systems, supplied in a 100-pin MQFP package measuring 20 mm by 14 mm. The verified operating-temperature range is 0°C to +70°C, while the listed supply ranges are 3 V to 3.6 V and 4.75 V to 5.25 V. Its documented features include an integrated phase-locked loop, on-chip digital gain, an asynchronous digital serial interface, and power-management functions. The CS4280 is associated with CrystalClear PCI audio implementations and is commonly paired with the CS4297 audio codec. An audio volume-control IC is a specialized interface-circuit category that controls signal level and coordinates an audio subsystem with its digital host. Within the broader hierarchy, the CS4280-CM belongs to the audio special-purpose interface IC class, which falls under interface ICs and ultimately integrated circuits. Its role differs from a general-purpose audio codec: the volume-control device manages gain and supporting control functions, while the companion codec performs much of the audio conversion and signal processing. This division of responsibilities was common in PCI-based sound-card architectures. The CS4280-CM combines digital gain control with internal synchronization support. The integrated phase-locked loop can provide the timing reference required for coordinated digital audio operations, while the asynchronous digital serial interface allows the host controller to exchange control information with the device. On-chip digital gain provides software-addressable level adjustment without relying exclusively on an external passive attenuator. Together, these features support centralized volume control, mute-related system management, and coordinated operation with a companion audio codec. The CS4280 belongs to a family of legacy Crystal Semiconductor and Cirrus Logic audio devices designed for personal-computer sound-card implementations. Verified cross-reference information identifies CS4281-CM as an alternative, and the CS4280 is documented as pin-compatible with the earlier CS4614 and CS4622/CS4624 families. These relationships are useful for repair and legacy-platform work, although board-level compatibility must include verification of supply rails, clocking, software registers, and companion codec requirements. The MQFP package is intended for surface-mount assembly and provides a large, inspectable footprint compared with modern compact audio IC packages. Typical uses include CrystalClear PCI sound cards, DOS-era and Windows 98-era multimedia computers, multi-function audio adapters, and legacy industrial or retrocomputing systems that retain support for the CS4280 and its associated drivers. The CS4297-JQ is a relevant companion because verified sources specifically describe the CS4280 as commonly used with the CS4297 codec. The CS4216-KL represents another nearby audio-interface family that may be relevant when comparing platform architectures, although it is not presented as a direct substitute for the CS4280-CM. When repairing or repurposing a board, verify the complete 100-pin footprint, 3.3 V and 5 V rail requirements, clock connections, serial interface topology, and codec handshake before ordering. The documented 0°C to +70°C range limits deployment to commercial-temperature environments unless the surrounding system and the actual sourced component provide wider qualification. Because the verified material identifies the CS4280 family as an obsolete or end-of-life product, procurement planning should emphasize authorized inventory, traceable sourcing, and a full functional test after replacement.

RFQ پەیوەندی
CS4281-CQZ PCI Audio Interface IC | Cirrus Logic
CS4281-CQZ

CS4281-CQZ PCI Audio Interface IC | Cirrus Logic

The Cirrus Logic CS4281-CQZ is a PCI audio controller IC with integrated legacy games support, supplied in a 100-lead TQFP exposed-pad package measuring 14 x 14 mm. It is designed for desktop and notebook computer audio systems and works with an AC'97 codec such as the CS4297A to implement a complete multimedia audio solution. The controller handles the PCI host interface while the companion codec performs the audio conversion functions. A PCI audio controller is a specialized interface semiconductor that connects a computer's PCI bus to an audio codec and related multimedia circuitry. Within the broader hierarchy, it belongs to the interface IC and audio controller category, combining bus-interface control with system-level legacy-audio support. This division of responsibilities allows the CS4281 to coordinate audio transactions and legacy functions while the external codec handles signal conversion and analog audio output. The CS4281 is intended for legacy PC audio architectures rather than modern USB or high-definition multimedia audio designs. Its support for an AC'97 codec provides a defined integration path for desktop and notebook platforms. When paired with the CS4297A, the controller supports a complete high-quality PC audio solution. Compatibility with Microsoft PC '98 and PC '99 audio requirements is identified for this controller-and-codec combination, making system-level validation important during any legacy-platform upgrade. The CS4281 occupies a 100-pin TQFP exposed-pad package, providing the external connections required by the PCI interface, codec interface, legacy audio functions, control logic, and associated support circuitry. The exposed thermal pad helps transfer heat from the device into the PCB copper system. Placement of input, interface, and decoupling connections should follow the manufacturer's reference layout to preserve signal integrity and minimize loop area around high-speed bus signals. Typical deployments include legacy desktop and notebook computers, industrial personal computers, PCI-based audio expansion systems, and specialized platforms that retain an AC'97 audio architecture. The CS4297A is the principal codec referenced for a complete solution. A system integrator should also confirm operating-system driver availability, legacy game-device support, signal levels, timing, and thermal performance before releasing a new motherboard design. The principal design consideration is architecture compatibility rather than individual logic voltage. The CS4281 is tied to a mature PCI and AC'97 ecosystem, so it is most appropriate when an existing platform already uses this interface combination. New designs with USB audio, modern PCI Express audio, or other codecs require a different controller unless the legacy interface is intentionally preserved through adapters or mezzanine circuitry. This page combines the manufacturer-described controller role, package information, codec integration details, drop-in family references, comparison parameters, and practical implementation guidance. It is intended to help engineers identify whether the CS4281-CQZ remains appropriate for legacy PCI audio systems and to distinguish direct footprint-compatible references from replacements that require different package or interface qualification.

RFQ پەیوەندی
CS4297-JQ AC'97 Stereo Audio Codec | Cirrus Logic | PC
CS4297-JQ

CS4297-JQ AC'97 Stereo Audio Codec | Cirrus Logic | PC

Cirrus Logic CS4297-JQ is a 2-channel, AC'97 1.03-compatible stereo audio codec designed for PC multimedia systems and housed in a 48-TQFP 7 x 7 mm package. The device uses CrystalClear delta-sigma and mixed-signal technology to support high-quality audio in desktop, portable, and entertainment PCs. It integrates stereo modulation and a 48-kHz audio interface for legacy multimedia designs. An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and accepts analog inputs for digital processing. In the product hierarchy, the CS4297-JQ is an audio codec and audio modulator, belonging to the broader interface IC and semiconductor categories. Its legacy AC'97 interface connects a host audio controller to external codec and speaker circuitry in PC sound-card architectures. The verified product data identifies the CS4297-JQ as an AC'97 1.03-compatible stereo codec with two channels. Its package is specified as 48-TQFP at 7 x 7 mm by DigiKey, while related Cirrus Logic records identify the package as LQFP. The compact surface-mount package supports compact desktop and portable multimedia layouts, although the large 48-pin footprint requires careful fanout and layout planning. Technical documentation describes the analog line inputs as internally biased at the Vrefout voltage reference and requiring AC coupling. The maximum allowable line input is 1 V RMS. These details make external coupling, input attenuation, and analog-ground return paths central to achieving predictable signal amplitude and reduced distortion in a legacy sound-card implementation. Typical applications include PC sound cards, desktop multimedia systems, portable entertainment computers, legacy AC'97 audio subsystems, and retro computer restorations. The device is particularly relevant when preserving an original SoundFusion architecture is more important than selecting a current USB or HD Audio codec. Designers should verify the complete pinout and electrical limits against the manufacturer datasheet before layout or repair work. AC-coupled line inputs require suitable passive components, while mixed-signal placement and grounding must keep switching and digital return currents away from sensitive audio paths. The listed alternatives should also be checked for exact interface, voltage, clocking, and pin compatibility rather than package alone. This page consolidates verified distributor descriptions, cross-reference findings, practical application context, and design cautions for engineers sourcing or restoring systems that depend on this discontinued stereo AC'97 codec.

RFQ پەیوەندی
CS4297A-JQ - AC'97 Stereo Audio Codec | Cirrus Logic
CS4297A-JQ

CS4297A-JQ - AC'97 Stereo Audio Codec | Cirrus Logic

The Cirrus Logic CS4297A-JQ is an AC'97 2.1-compatible stereo audio codec for PC multimedia systems, featuring CrystalClear delta-sigma mixed-signal conversion, 18-bit audio, 20-bit S/PDIF support, and SPI control in a 48-LQFP 7 x 7 mm package. An audio codec is a mixed-signal interface IC that converts between digital audio data and analog microphone or line-level signals. The CS4297A-JQ combines one analog-to-digital converter, one digital-to-analog converter, and the AC'97 serial audio interface used by PC-compatible multimedia controllers. Within the semiconductor hierarchy, it belongs to the audio-codec and interface-IC categories rather than a standalone amplifier or converter. Key features include AC'97 2.1 compatibility, stereo conversion, CrystalClear delta-sigma technology, 18-bit ADC and DAC resolution, a 20-bit S/PDIF interface, and SPI configuration. These functions allow a PC multimedia system to capture and playback stereo audio while sharing digital control through the SPI interface. The 48-LQFP package also provides a defined leaded footprint suitable for conventional surface-mount PCB assembly. The device integrates analog input and output circuitry with a digital AC-Link path. Its delta-sigma conversion architecture is intended for multimedia audio rather than high-bandwidth industrial signal acquisition. The S/PDIF interface provides a digital route for digital audio, while the AC'97 interface connects the codec to a compatible multimedia controller. Exact clock requirements, conversion-rate limits, analog performance, and electrical limits must be confirmed in the manufacturer datasheet before final system design. Typical uses include legacy PC multimedia systems, desktop and portable entertainment computers, and sound cards that require an AC'97-compatible stereo codec. It is particularly relevant when maintaining or repairing an existing PC architecture rather than designing a new USB or I2S audio subsystem. Software compatibility also depends on the host controller, operating system, driver, and the exact AC'97 electrical implementation. For new designs, confirm that the legacy AC'97 architecture is required and that the host controller supports the codec's serial protocol. Preserve the manufacturer's recommended decoupling, analog layout, clocking, and grounding practices. Because this is an older PC multimedia component, lifecycle status, interface timing, and long-term availability deserve verification before committing a new production platform. This page combines the verified CS4297A-JQ product identity, package information, AC'97 feature set, ordering alternatives, selection guidance, and practical integration notes. It also distinguishes confirmed drop-in ordering notation from broader functional equivalents so engineers can assess replacement risk without assuming that every similar audio codec is electrically interchangeable.

RFQ پەیوەندی
CS4299-XQ Stereo AC'97 Audio Codec | Cirrus Logic
CS4299-XQ

CS4299-XQ Stereo AC'97 Audio Codec | Cirrus Logic

The Cirrus Logic CS4299-XQ is a mixed-signal stereo audio codec designed for AC'97 2.1-compatible PC multimedia systems. It combines a digital controller interface, analog audio conversion, and CrystalClear delta-sigma mixed-signal technology in a surface-mount LQFP package. The device was intended to pair with a digital controller located on the PCI bus or integrated within system core logic, making it primarily relevant to legacy desktop, portable, and entertainment PC designs. An audio codec is a mixed-signal integrated circuit that converts digital audio data into analog signals and converts analog sound into a digital format for processing by a host controller. The CS4299-XQ is an AC'97 codec, so its principal interfaces are the Audio Codec '97 serial link and analog audio connections rather than a modern USB or I2S audio interface. AC'97 was designed for PC multimedia architectures and supports synchronized audio, modem, and control functions through a defined digital bus. According to the Cirrus Logic CS4299 datasheet, the CS4299 contains AC'97-compliant control registers and additional Cirrus Logic-defined control registers. These registers configure the codec's core functions and support firmware or software control of audio behavior. The implementation uses CrystalClear delta-sigma and mixed-signal technology, a Cirrus Logic approach intended to support high-precision audio conversion in multimedia equipment. The CS4299-XQ is relevant to retrofitted desktop computers, industrial legacy systems, embedded AC'97 hosts, audio test equipment, and restoration projects involving older PCI-based sound subsystems. Its AC'97 architecture provides a direct interface to compatible host controllers, while analog input and output stages support connections to microphones, line-level sources, speakers, and external audio amplifiers. For a new design, confirm that the host controller still supports AC'97 2.1 and verify the complete pin, clock, voltage, and analog specification before layout release. The CS4299 is a legacy codec, and modern systems commonly use USB audio, I2S, or integrated HD audio controllers instead. An existing motherboard is also a critical consideration because the required driver, interrupt, bus, and codec-support capabilities may not exist on current platforms. This page combines the confirmed codec architecture and AC'97 application information with engineering guidance, comparison fields, and sourcing links for the CS4299-XQ. It also identifies which electrical and package details should be checked against the manufacturer datasheet before production use.

RFQ پەیوەندی
CS4630-CM - CrystalClear PCI Audio Accelerator | Cirrus Logic
CS4630-CM

CS4630-CM - CrystalClear PCI Audio Accelerator | Cirrus Logic

Cirrus Logic CS4630-CM is a CrystalClear SoundFusion PCI audio accelerator offered in a 128-pin MQFP surface-mount package measuring 14 mm by 20 mm by 2.85 mm. The device is described as a high-performance upgrade to the CS4624 PCI audio accelerator and supports legacy compatibility modes that enable real-mode DOS compatibility within PCI-only audio subsystems. It also operates from multiple supply rails, including 3.3 V, 2.5 V, and 5 V conditions documented in the manufacturer datasheet. A PCI audio accelerator is an interface integrated circuit that manages audio data movement between a host computer's PCI bus and audio codecs or other audio peripherals. Its role within the broader hierarchy is an interface IC and, more specifically, an audio interface device. Legacy compatibility support distinguishes the CS4630-CM from basic modern audio controllers by allowing older operating environments to interact with PCI-based audio hardware. The verified electrical information includes operating test conditions of 0°C to 70°C, with PCIVDD and CRYVDD at 3.3 V, CVDD at 2.5 V, and VDD5REF at 5 V. The datasheet identifies PCI signal characteristics with a 3.3 V logic-high level, a 0 V logic-low level, and a 1.4 V reference level. It also documents dedicated second AC'97 data-input, bit-clock, and link-clock functions. The CS4630-CM supports a primary and secondary AC'97 audio-link arrangement, with dedicated pins for second AC'97 data input, bit clock, and serial audio traffic. This architecture is appropriate for legacy PCI multimedia adapters, industrial computers, and specialized embedded systems that retain AC'97 codec connections while requiring the CS4630's documented compatibility capabilities. Typical engineering uses include DOS-compatible PCI sound cards, industrial PCI audio subsystems, legacy embedded-computer upgrades, and audio adapters requiring a dedicated hardware accelerator. Because the part is reported as obsolete or end-of-life, procurement should emphasize authorized inventory, traceability, and functional validation rather than treating new design adoption as the default. A critical design consideration is package verification. The part is documented as a 128-MQFP, also identified as a 128-BFQFP in MS-022, rather than a modern QFN package. PCB footprints, pin numbering, and soldering process requirements must therefore be checked against the original package drawing before assembly or replacement. This product page consolidates the verified manufacturer and distributor information, observed pricing, lifecycle evidence, package data, technical operating conditions, and application guidance for engineers evaluating the obsolete CS4630-CM PCI audio accelerator.

RFQ پەیوەندی
CS61584-IQ5 - Dual T1/E1 3.3V/5V Line Interface Unit | Cirrus Logic
CS61584-IQ5

CS61584-IQ5 - Dual T1/E1 3.3V/5V Line Interface Unit | Cirrus Logic

The Cirrus Logic CS61584-IQ5 is a Dual T1/E1 Line Interface Unit (LIU) designed for short-haul and long-haul telecom applications, integrating two independent transceivers for T1 (1.544 Mbps) and E1 (2.048 Mbps) line formats in a single 64-pin TQFP (10x10 mm) package. The part operates from a single 5 V supply (4.75 V to 5.25 V), supports 3.3 V digital I/O via dedicated VDD_IO, and dissipates power dissipation of 310 mW typical. According to Cirrus Logic product listings, the device is housed in a TQFP-64 (10x10 mm) surface-mount package rated -40 C to +85 C industrial temperature range, and the IQ5 suffix indicates a specific speed/temperature grade per Cirrus Logic ordering nomenclature. A Line Interface Unit (LIU) is a physical-layer transceiver IC that sits between a framer/framer-LIU combination and the T1 or E1 twisted-pair line, performing transmit pulse shaping, receive equalization, clock/data recovery, and line monitoring. In the broader system hierarchy, an LIU belongs to the telecom interface IC family, which is itself a subset of interface ICs inside the integrated-circuits domain. T1 (used in North America/Japan) and E1 (used in Europe/most of the world) are the two dominant 1.544 Mbps / 2.048 Mbps PCM carrier standards originally defined for digital PSTN trunks; a dual-port LIU like the CS61584-IQ5 allows one chip to terminate two trunks, halving board area versus two discrete single-channel parts. Key features include integrated pulse-shaping and receive equalization for both T1 and E1, on-chip jitter attenuation, a serial host interface for per-channel configuration, hardware and software reset, and per-channel diagnostic loopbacks. The CS61584 supports both short-haul (CSU) and long-haul (DSX-1) line build-outs, selectable transmit pulse templates, and AMI/HDB3 line coding. Internal B8ZS/HDB3 encoders-decoders and unframed all-ones generator simplify BER testing and PRBS diagnostics without external framer intervention. Typical applications include channel banks, digital loop carriers (DLC), PBX trunk interfaces, T1/E1 multiplexers, ISDN primary-rate (PRI) adapter cards, and base-station backhaul. Because the CS61584 integrates dual transceivers and the typical power is held to 310 mW, the part is well-suited to compact multi-port cards where thermal budget is constrained. Designers should provide proper 1:2 or 1:1.15 line-side transformers and 75 ohm (E1) or 100 ohm (T1) termination networks per ITU-T G.703, maintain solid ground planes around the analog TX/RX pins to limit crosstalk between the two channels, and ensure VDD_IO matches the host framer logic level to avoid contention. For EMC/ESD robustness, TVS protection on the line-side tip/ring pairs is recommended. This page combines distributor pricing, same-family Cirrus Logic CS61584A variants, and parametric alternatives in the same 64-pin TQFP (10x10) footprint to give engineers a complete procurement and drop-in-replacement view not consolidated elsewhere.

RFQ پەیوەندی
CS82C37A - 5V 8MHz CMOS DMA Controller | Renesas
CS82C37A

CS82C37A - 5V 8MHz CMOS DMA Controller | Renesas

The Renesas Electronics CS82C37A is a 5 V CMOS programmable direct memory access controller with an 8 MHz operating frequency in a 44-pin PLCC package. It is an enhanced implementation of the industry-standard 8237A DMA controller, adding functionality and performance while retaining pin compatibility with NMOS designs. The device uses a 2-micron CMOS process and includes a fully static architecture that supports gated operation. A direct memory access controller is an interface IC that transfers blocks of data between memory and peripherals without requiring continuous processor intervention. The DMA controller therefore fits within the broader hierarchy of interface controllers, bus-interface devices, semiconductors, and programmable system support logic. It is particularly useful in legacy embedded systems where a processor must service multiple high-throughput data paths while retaining deterministic memory access. The CS82C37A operates from a 5 V supply and supports an 8 MHz clock. Its principal functions include programmable transfer modes, address generation, byte and word transfers, terminal counts, request generation, and status reporting. These capabilities allow it to move data among system memory and peripheral devices with less CPU overhead than software-driven block transfers. The 44-PLCC package provides a through-hole-compatible surface-mount footprint with 0.64 mm pitch and a 16.58 mm by 16.58 mm body. The package is relatively large compared with modern fine-pitch controllers, but it remains practical for legacy computer, industrial-control, test-equipment, and embedded-system boards that were designed around the 8237A interface. Typical applications include IBM PC-compatible DMA subsystems, data-acquisition equipment, communication adapters, memory-to-memory transfers, and industrial peripherals requiring autonomous block movement. The CS82C37A is most appropriate when preserving an established 8237A bus architecture is more important than adopting a newer DMA controller with a different electrical or programming interface. Before replacing an original 8237A, verify the system clock, control-signal timing, address multiplexing, interrupt behavior, and package pin arrangement against the manufacturer datasheet. The enhanced CS82C37A is designed to reduce power consumption relative to the original NMOS implementation, but the surrounding processor, peripheral devices, memory timing, and bus timing still determine the achievable system throughput.

RFQ پەیوەندی
CS82C52 - Programmable UART and BRG | Intersil
CS82C52

CS82C52 - Programmable UART and BRG | Intersil

The Intersil CS82C52 is a programmable Universal Asynchronous Receiver/Transmitter (UART) with an integrated Baud Rate Generator (BRG) in a 28-pin PLCC package. It is designed for serial-controller and UART interface applications where programmable baud-rate timing and asynchronous data transfer are required. The verified distributor listing identifies the device as a one-channel RS232 UART IC in a 28-PLCC package measuring 11.51 mm by 11.51 mm. A UART is a serial communication interface that converts parallel data from a controller into a framed serial stream and converts received serial data back into parallel data. The CS82C52 combines this UART function with a programmable baud-rate generator, placing transmit timing, receive timing, and serial-channel control in one CMOS interface IC. This integration reduces the number of external timing components compared with a UART implemented from separate logic. The verified material describes the CS82C52 as a high-performance programmable UART and BRG on a single chip. Its programmable architecture makes it suitable for systems in which the communication rate must be selected by the host controller or fixed through configuration logic. The RS232 classification identifies the electrical-interface class used by the associated UART function, while the actual board-level signal levels still depend on the transceiver and system design. Typical uses include embedded serial controllers, legacy industrial control equipment, peripheral interfaces, and communications systems that require a dedicated UART channel. The 28-pin PLCC package provides a defined leaded surface-mount footprint, allowing the part to be used where a compact, inspectable package is preferable to a fine-pitch package. The available data does not provide complete electrical timing tables, supply-voltage limits, or all pin-level details, so those specifications require confirmation from the manufacturer datasheet. For replacement work, engineers should verify the exact package, pin assignments, electrical limits, timing, temperature grade, and software-visible register behavior before approving a substitute. The device is an older CMOS interface component, so lifecycle status and sourcing should be confirmed at the time of procurement. Pricing and inventory are also time-sensitive and should be checked against current distributor records.

RFQ پەیوەندی
CS82C52Z - 5V 16MHz UART with Baud Rate Generator | Renesas
CS82C52Z

CS82C52Z - 5V 16MHz UART with Baud Rate Generator | Renesas

The Renesas Electronics CS82C52Z is a 5 V CMOS UART and baud-rate generator combining one programmable asynchronous serial channel and one baud-rate clock source in a 28-pin PLCC package. It operates from a 5 V supply, supports a 16 MHz input clock, and is specified for RS232 interface applications. A universal asynchronous receiver/transmitter, or UART, is an interface controller that converts parallel processor data into serial characters and converts received serial characters back into parallel data. The CS82C52Z belongs to the UART and serial-interface IC hierarchy, where it sits below microprocessors and above the physical RS232 transceiver stage. Its integrated baud-rate generator reduces the external clock circuitry required to support programmable communication rates. Key device attributes include a 28-pin PLCC package measuring 11.51 mm by 11.51 mm, a single UART channel, RS232 interface capability, and operation from 5 V. The original Intersil implementation used an advanced 2 µm CMOS process. Distributor records also identify the component as a peripheral UART and baud-rate generator with a 16 MHz maximum clock indication and a Pb-free assembly designation. The architecture supports programmable asynchronous serial communication in systems where a dedicated general-purpose UART is preferable to implementing the bit-timing state machine in application firmware. Because the baud-rate generator and serial interface share the same IC, designers can reduce component count while retaining clock generation, receive, and transmit functions in one device. RS232 signal levels still require an external line driver or receiver when the board must connect to a physical RS232 port. Typical uses include industrial control equipment, data acquisition systems, legacy peripheral interfaces, embedded test equipment, and RS232 communication links between a controller and a peripheral module. The CS82C52Z is also suitable for designs that retain older Intersil or Renesas interfaces but need a second source. Any replacement should be checked for identical pin functions, register behavior, interrupt structure, baud-rate generation, and signal-level compatibility rather than package outline alone. When designing around the CS82C52Z, connect it to a 5 V rail with normal high-speed decoupling and confirm that the external RS232 transceiver operates from the same supply. The PLCC package is not a leaded-through-hole format and requires a suitable surface-mount land pattern and assembly process. Use the manufacturer pin-description table to assign board nets because the package drawing alone does not establish signal direction or handshake functions. This page combines device specifications, sourcing guidance, drop-in cross-reference findings, application-level design advice, and a parameter-by-parameter comparison to support both legacy maintenance and new design decisions involving the CS82C52Z.

RFQ پەیوەندی
CS82C55A - 24-Bit CMOS Programmable I/O Interface
CS82C55A

CS82C55A - 24-Bit CMOS Programmable I/O Interface

Renesas Electronics CS82C55A is a CMOS programmable peripheral interface that provides 24 individually programmable input/output lines, an 8-bit data bus, and three principal operating modes for microprocessor-controlled I/O expansion. The device operates from a single 5 V supply in its standard configuration, supports an 8 MHz interface clock, and is offered in a 44-pin PLCC package according to the product listings. Its architecture follows the industry-standard 8255A configuration and is compatible with 80C86, 80C88, and other microprocessor bus arrangements. A programmable peripheral interface is an interface IC used to extend a limited microprocessor bus with general-purpose digital I/O. It belongs to the parallel interface and interface-controller hierarchy, where a system CPU handles configuration while the CS82C55A manages data transfer, handshaking, and port direction control. The CS82C55A divides its 24 lines into two independently controlled groups of 12, allowing each group to operate as an 8-bit port with four control lines, as two 4-bit ports, or as individual bit-oriented channels. The device's three main operating modes provide design flexibility. Mode 0 supports strobed input or output operation, Mode 1 provides programmed interrupt and handshake signaling for peripheral data transfer, and Mode 2 supports bidirectional bus operation on one port. Each of the 24 lines can be configured as input or output, and the two 4-bit port-control signals can operate in either strobed or interrupt-driven form. This makes the part useful when a processor needs more parallel lines than are available on its native bus. Manufactured using a self-aligned silicon-gate CMOS process identified as Scaled SAJI IV, the CS82C55A provides static CMOS operation with low operating power. Its 5 V supply arrangement and 8 MHz clock capability allow it to interface with the timing envelope of the microprocessor families cited in the manufacturer documentation. The PLCC-44 package also supports leaded-board assembly, although board layout must preserve the device's exact pin arrangement and supply requirements. Typical uses include industrial control panels, printer and peripheral interfaces, general-purpose data acquisition, legacy industrial equipment, and embedded systems that retain an 8255A-compatible interface. The part is especially useful where configurable input, output, and handshake behavior is preferable to a fixed-purpose I/O expander. Firmware must configure the control word before each operating-mode change because the mode registers are write-only and do not retain their contents after reset. A key design consideration is verifying the original board's signal direction, reset state, and timing assumptions rather than assuming that every 8255A implementation is electrically identical. Confirm the supply voltage, clock source, control-word sequence, and processor handshake signals against the manufacturer datasheet. If replacing an older device, check whether its board uses an 8255-compatible clock and whether any external logic depends on a particular mode-change transition. This page consolidates the manufacturer's functional description, package and interface specifications, qualified drop-in references, and practical implementation guidance to support component identification, PCB reuse, and replacement planning.

RFQ پەیوەندی
CS82C59A - CMOS Priority Interrupt Controller | Renesas
CS82C59A

CS82C59A - CMOS Priority Interrupt Controller | Renesas

Renesas Electronics CS82C59A is a CMOS priority interrupt controller manufactured using a 2 µm CMOS process, with eight interrupt inputs and a 28-pin PLCC package. It accepts eight interrupt requests, prioritizes simultaneous requests through the cascaded interrupt architecture, and supports microprocessor interrupt systems requiring deterministic service ordering. The device is designed for direct use with processors including the 80C286, 80286, 80C86/88, 8086/88, 8080/85 and NSC800. A programmable interrupt controller is an interface IC that manages multiple peripheral interrupt requests on behalf of a central processing unit. Instead of polling every peripheral, the processor receives one interrupt request from the controller and reads a priority register to identify the source. In the broader semiconductor hierarchy, the CS82C59A belongs to the interface-controller family and reduces processor overhead in embedded and industrial control systems. The controller provides eight interrupt inputs, allowing eight interrupt sources to share a processor interrupt line. Cascaded operation supports expansion beyond the base interrupt count, while the industry-standard configuration accommodates common 8-bit and 16-bit processor interrupt architectures. The CMOS implementation combines low-power operation with the operating characteristics expected from the original 82C59A family. The CS82C59A was manufactured on an advanced 2 µm CMOS process. Its interrupt logic is intended to provide high performance in multilevel priority systems by removing the need for continuous software polling. Exact clock, propagation-delay, supply-voltage and current limits require confirmation against the manufacturer datasheet before a new high-speed or low-power design is released. Typical applications include industrial controller cards, embedded processor platforms, data-acquisition systems, peripheral-interface boards and legacy-compatible industrial equipment. A suitable design connects interrupt sources to the controller inputs, programs the required priority and mask configuration, and connects the controller output to the processor interrupt mechanism. System firmware must preserve the established interrupt-acknowledge sequence. The principal design consideration is architectural rather than thermal: the CS82C59A is a legacy peripheral built around an established interrupt convention. Before placing it in a new design, verify processor timing, acknowledge protocol, voltage compatibility and package availability against the intended processor and peripheral environment. This page organizes the controller's role, package, documented processor compatibility, application guidance and verified substitute information. It also identifies where timing, electrical limits and lifecycle details must be checked directly in the manufacturer documentation before schematic release.

RFQ پەیوەندی
CS8401A-CP - 2-Channel Digital Audio Transmitter | Cirrus Logic
CS8401A-CP

CS8401A-CP - 2-Channel Digital Audio Transmitter | Cirrus Logic

Cirrus Logic CS8401A-CP is a 2-channel digital audio interface transmitter built as a monolithic CMOS circuit in a 24-pin PDIP package. It accepts audio and control data separately, performs multiplexing and biphase-mark encoding internally, and supports AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 interface standards. The transmitter can drive a transmission line directly or through a transformer. A digital audio transmitter is an interface IC that converts parallel or control-oriented audio information into a standardized digital transmission format. It belongs to the digital audio interface transmitter category, connects to audio codecs and digital signal processors, and operates within the broader hierarchy of interface ICs and semiconductor components. Standardized formats such as S/PDIF allow digital audio to move between consumer, industrial, and professional audio equipment while preserving a common signal structure. The CS8401A family provides separate paths for audio and control data while handling multiplexing and biphase-mark encoding inside the transmitter. This integration reduces the amount of external encoding logic required in a digital audio interface. The component is identified specifically as a 2-channel audio transmitter and supports direct line drive or transformer-coupled output, allowing system designers to select the output strategy that matches the transmission-line topology. The monolithic CMOS implementation combines the transmitter functions in one integrated circuit. AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 compatibility makes the device applicable to equipment using established digital-audio conventions. Its interface role is especially relevant to legacy audio designs, professional playback equipment, digital mixers, digital recording systems, and test equipment that requires a dedicated digital-audio output stage. Typical uses include converting an internal PCM audio stream into a S/PDIF-compatible transmission, generating a digital-audio output for an amplifier or recorder, and adding a standardized digital output to a legacy audio board. In these systems, the transmitter handles format encoding and multiplexing while an upstream codec or processor supplies the source audio. A downstream receiver then recovers the digital audio stream from the encoded transmission. PCB implementation requires careful treatment of the digital output path. Use the manufacturer pin-description table when assigning signals, place the device to minimize return-path discontinuity, and match the output connection method to the intended cable and grounding topology. Confirm electrical limits, supply requirements, clocking details, and output configuration in the manufacturer datasheet before finalizing a production design. This product page consolidates the verified function, package, interface standards, sourcing information, and practical design considerations for the CS8401A-CP. Its key engineering value is the combination of separate audio and control inputs, internal multiplexing and biphase-mark encoding, and support for direct or transformer-coupled transmission in a single 24-pin PDIP device.

RFQ پەیوەندی
CS8405A-CS - 96 kHz Audio Transmitter | Cirrus Logic
CS8405A-CS

CS8405A-CS - 96 kHz Audio Transmitter | Cirrus Logic

Cirrus Logic CS8405A-CS is a monolithic CMOS digital audio interface transmitter designed for 96 kHz audio and digital data transmission. It accepts audio and digital data, multiplexes and encodes the input, and drives the resulting signal onto a cable in accordance with AES3, IEC60958, S/PDIF, or EIAJ CP1201 formats. The device is packaged in a 28-pin SOIC package. A digital audio interface transmitter is a specialized interface integrated circuit that converts source audio and associated digital data into a standardized serial transmission format. Within the product hierarchy, it belongs to digital audio interfaces, interface ICs, and broader semiconductor signal-conditioning and communication devices. Its principal purpose is to provide a standardized digital audio output while reducing the system-level circuitry required at the transmitter interface. The CS8405A family supports the AES3, IEC60958, S/PDIF, and EIAJ CP1201 interfaces described by the manufacturer. Operation at up to 96 kHz makes the transmitter suitable for professional digital audio equipment, consumer audio systems, recording equipment, and broadcast infrastructure where a standards-compliant digital audio connection is required. The monolithic CMOS implementation combines input handling, multiplexing, encoding, and output driving in one device. The transmitter architecture accepts parallel or serial audio information, selects the required data for transmission, applies the selected digital-audio encoding, and presents the encoded output through the interface stage. This integration reduces the number of discrete encoding components required around a digital audio connector. System designers should still use the manufacturer pin-description table and application guidance to assign clock, control, status, ground, and signal connections correctly. Typical CS8405A applications include digital mixing consoles, professional audio peripherals, CD and broadcast equipment, recording interfaces, consumer receivers, and equipment that exchanges digital audio using S/PDIF or AES3-compatible connections. In these systems, the transmitter can convert an internal digital-audio stream into the format expected at an external digital-audio connector or cable. The primary design consideration is interface integrity. Keep the transmitter clock and data connections short, follow the reference layout and grounding guidance in the Cirrus Logic datasheet, and account for the electrical requirements of the selected digital-audio standard. The 28-pin SOIC package also requires conventional surface-mount assembly spacing and adequate board area for routing the multiple control and data signals. This product overview combines the CS8405A-CS device function, package information, supported transmission standards, application guidance, and practical design considerations. It also distinguishes verified electrical details from parameters that require confirmation in the manufacturer datasheet before schematic release or PCB sign-off.

RFQ پەیوەندی