Video ICs
بەرهەمەکان (130+)
ADV7179BCP - 10-Bit NTSC/PAL Video Encoder | Analog Devices
Analog Devices ADV7179BCP is a 10-bit chip-scale NTSC/PAL analog video encoder with three DAC outputs in a 40-LFCSP-WQ (6x6 mm) exposed-pad package. It accepts digital CCIR-601 4:2:2, 8-bit component-video data and converts it into a standard analog baseband television signal. Its identified operating supply is 3.3 V, with guaranteed timing specifications from 3.0 V to 3.6 V. A video encoder is a signal-conversion integrated circuit that transforms digital video into legacy analog composite or component output. In the product hierarchy, the ADV7179BCP is a video encoder, interface IC, signal-processing semiconductor, and communications-interface component. It bridges a digital video pipeline and displays or capture equipment that still require NTSC or PAL baseband signals. Key features include three 10-bit DACs, support for PAL and NTSC systems, a 40-LFCSP-WQ package with an exposed pad, and a stated operating temperature range of -40°C to +85°C. According to the Analog Devices ADV7174/ADV7179 data sheet, the timing specifications apply with a 3.3 V analog supply, a 1.235 V reference, and a 150 Ω RSET resistor. The encoder also supports WSS and CGMS-A data control generation. The digital input follows the CCIR-601 4:2:2, 8-bit component-video format, while the encoder generates synchronized analog baseband outputs. Output video frames are synchronized with incoming timing reference codes. Optionally, the device accepts or generates HSYNC, VSYNC, and FIELD timing signals, and those pulse widths and positions can be adjusted in master mode. Master and slave timing behavior therefore supports integration with different video timing sources. Typical uses include legacy broadcast and surveillance equipment, industrial inspection systems, video capture cards, camera interfaces, mobile or portable video products, and embedded systems requiring an analog NTSC or PAL output from a CCIR-601 digital-video source. The three DAC outputs support the device's role as a complete integrated encoder rather than a digital-only processing block. Designers should preserve the documented supply range, reference configuration, and external RSET value of 150 Ω. The exposed pad requires careful thermal and layout treatment so heat can leave the encoder package, while analog video outputs require suitable termination and trace-impedance control to avoid signal degradation. This page consolidates manufacturer functionality, verified pricing, lifecycle information, package details, and application-focused design guidance. It also distinguishes documented ADV7179 family alternatives from unrelated cross-package parts so engineers can evaluate replacement options without assuming that similar encoder functions guarantee pin-to-pin compatibility.
ADV7179BCP-REEL - 10-Bit NTSC/PAL Video Encoder | Analog Devices (Tape & Reel)
Analog Devices ADV7179BCP-REEL is a 10-bit chip-scale NTSC/PAL analog video encoder with three DAC outputs in a 40-LFCSP-WQ (6x6 mm) exposed-pad package. It accepts digital CCIR-601 4:2:2, 8-bit component-video data and converts it into a standard analog baseband television signal. Its identified operating supply is 3.3 V, with guaranteed timing specifications from 3.0 V to 3.6 V. A video encoder is a signal-conversion integrated circuit that transforms digital video into legacy analog composite or component output. In the product hierarchy, the ADV7179BCP-REEL is a video encoder, interface IC, signal-processing semiconductor, and communications-interface component. It bridges a digital video pipeline and displays or capture equipment that still require NTSC or PAL baseband signals. Key features include three 10-bit DACs, support for PAL and NTSC systems, a 40-LFCSP-WQ package with an exposed pad, and a stated operating temperature range of -40°C to +85°C. According to the Analog Devices ADV7174/ADV7179 data sheet, the timing specifications apply with a 3.3 V analog supply, a 1.235 V reference, and a 150 Ω RSET resistor. The encoder also supports WSS and CGMS-A data control generation. The digital input follows the CCIR-601 4:2:2, 8-bit component-video format, while the encoder generates synchronized analog baseband outputs. Output video frames are synchronized with incoming timing reference codes. Optionally, the device accepts or generates HSYNC, VSYNC, and FIELD timing signals, and those pulse widths and positions can be adjusted in master mode. Master and slave timing behavior therefore supports integration with different video timing sources. Typical uses include legacy broadcast and surveillance equipment, industrial inspection systems, video capture cards, camera interfaces, mobile or portable video products, and embedded systems requiring an analog NTSC or PAL output from a CCIR-601 digital-video source. The three DAC outputs support the device's role as a complete integrated encoder rather than a digital-only processing block. Designers should preserve the documented supply range, reference configuration, and external RSET value of 150 Ω. The exposed pad requires careful thermal and layout treatment so heat can leave the encoder package, while analog video outputs require suitable termination and trace-impedance control to avoid signal degradation. This page consolidates manufacturer functionality, verified pricing, lifecycle information, package details, and application-focused design guidance. It also distinguishes documented ADV7179 family alternatives from unrelated cross-package parts so engineers can evaluate replacement options without assuming that similar encoder functions guarantee pin-to-pin compatibility.
ADV7179BCPZ - NTSC/PAL Video Encoder | Analog Devices
Analog Devices ADV7179BCPZ is a chip-scale NTSC/PAL video encoder that converts digital CCIR-601 4:2:2 8-bit component-video data into a standard analog baseband television signal. It operates from a 3 V to 3.6 V supply, provides three 10-bit video DAC outputs, and is packaged in a 40-lead 6 mm × 6 mm LFCSP-VQ package. A video encoder is a signal-conversion IC that translates a digital video stream into a conventional analog composite or component-video output. The ADV7179 sits within the broader video-processing hierarchy of digital interface logic, video encoder, video converter IC, and signal-processing semiconductor. Its role is especially useful when a modern digital video pipeline must connect to displays, recorders, test equipment, or broadcast-style processing blocks that still accept analog baseband video. The device accepts 8-bit CCIR-601 4:2:2 component data and includes three 10-bit DACs for analog video generation. Its I2C-compatible, two-wire serial interface uses serial data and serial clock signals, allowing a microprocessor to configure operating modes. Two slave addresses support bus arrangements involving multiple peripherals. The integrated encoder supports NTSC and PAL standards and provides advanced power-management functionality for portable and mobile video equipment. The 40-lead LFCSP-VQ package uses a 6 mm × 6 mm land pattern and surface-mount assembly. Configuration is handled through the serial interface rather than a parallel control bus, reducing the number of host-controller connections required for programmable analog-video output. The three-DAC architecture provides separate analog outputs for component or related baseband-video functions while preserving a compact digital input architecture. Typical uses include digital cameras, mobile-phone video accessories, portable-video equipment, video-capture systems, professional analog-video monitoring, and broadcast-video test equipment. Because the converter accepts an established digital component-video format, it is particularly suitable for systems that already produce CCIR-601 data but require an NTSC or PAL analog output stage. Designers should verify the clocking, serial-interface levels, output topology, and external termination required by the target video standard. The analog output network, power-supply routing, exposed-pad connection, and multilayer board return paths must follow the manufacturer’s recommended application circuit. Adequate decoupling near the supply pins is essential for stable video generation. This page combines the manufacturer’s device identity, package information, operating-status guidance, and verified replacement guidance with engineering-focused application and design guidance. It also distinguishes genuine same-footprint alternatives from the broader redesign choices engineers should consider when maintaining an older analog-video design.
ADV7179BCPZ-REEL - NTSC/PAL Video Encoder | Analog Devices (Tape & Reel)
Analog Devices ADV7179BCPZ-REEL is a chip-scale NTSC/PAL video encoder that converts digital CCIR-601 4:2:2 8-bit component-video data into a standard analog baseband television signal. It operates from a 3 V to 3.6 V supply, provides three 10-bit video DAC outputs, and is packaged in a 40-lead 6 mm × 6 mm LFCSP-VQ package. A video encoder is a signal-conversion IC that translates a digital video stream into a conventional analog composite or component-video output. The ADV7179 sits within the broader video-processing hierarchy of digital interface logic, video encoder, video converter IC, and signal-processing semiconductor. Its role is especially useful when a modern digital video pipeline must connect to displays, recorders, test equipment, or broadcast-style processing blocks that still accept analog baseband video. The device accepts 8-bit CCIR-601 4:2:2 component data and includes three 10-bit DACs for analog video generation. Its I2C-compatible, two-wire serial interface uses serial data and serial clock signals, allowing a microprocessor to configure operating modes. Two slave addresses support bus arrangements involving multiple peripherals. The integrated encoder supports NTSC and PAL standards and provides advanced power-management functionality for portable and mobile video equipment. The 40-lead LFCSP-VQ package uses a 6 mm × 6 mm land pattern and surface-mount assembly. Configuration is handled through the serial interface rather than a parallel control bus, reducing the number of host-controller connections required for programmable analog-video output. The three-DAC architecture provides separate analog outputs for component or related baseband-video functions while preserving a compact digital input architecture. Typical uses include digital cameras, mobile-phone video accessories, portable-video equipment, video-capture systems, professional analog-video monitoring, and broadcast-video test equipment. Because the converter accepts an established digital component-video format, it is particularly suitable for systems that already produce CCIR-601 data but require an NTSC or PAL analog output stage. Designers should verify the clocking, serial-interface levels, output topology, and external termination required by the target video standard. The analog output network, power-supply routing, exposed-pad connection, and multilayer board return paths must follow the manufacturer’s recommended application circuit. Adequate decoupling near the supply pins is essential for stable video generation. This page combines the manufacturer’s device identity, package information, operating-status guidance, and verified replacement guidance with engineering-focused application and design guidance. It also distinguishes genuine same-footprint alternatives from the broader redesign choices engineers should consider when maintaining an older analog-video design.
ADV7179KCP - 10-Bit PAL/NTSC Video Encoder | Analog Devices
Analog Devices ADV7179KCP is an integrated 10-bit PAL/NTSC analog video encoder with three DAC outputs and advanced power management, supplied in a 40-pin LFCSP with an exposed pad. It accepts digital CCIR-601 4:2:2, 8-bit component video and converts YCrCb data into a standard analog baseband television signal. According to the manufacturer datasheet, the device supports ITU-R BT.601 and BT.656 digital video interfaces and worldwide PAL and NTSC output standards. A video encoder is an interface IC that translates digital image data into a format that can be consumed by analog displays, broadcast equipment, recording systems, or other downstream video hardware. Within the broader product hierarchy, ADV7179KCP is a video encoder, interface converter, and signal-processing semiconductor rather than a general-purpose processor. Its fixed-function architecture performs color conversion and video encoding locally, reducing the processing burden on the surrounding digital system. The principal documented features include 10-bit conversion, three integrated DAC channels, PAL and NTSC generation, YCrCb input, and support for both BT.601 and BT.656 digital interfaces. Advanced power management is another stated product feature and can be valuable in portable or intermittently operated video equipment. These features make the encoder suitable for professional video, broadcast, industrial imaging, security, and legacy digital-video equipment where an analog composite output is required. The 40-pin LFCSP exposed-pad package supports compact, surface-mount PCB construction. Its exposed thermal pad provides a direct heat-spreading path to the PCB, but correct land-pattern implementation and adequate copper area are essential. The package also places the converter close to its digital video source, which can reduce routing requirements compared with a discrete implementation. Exact pin names, supply ratings, output levels, timing limits, and operating-temperature limits were not included in the retrieved verified data and therefore require confirmation in the manufacturer datasheet before design release. Typical uses include conversion of digital camera or graphics output into analog PAL or NTSC video, test and measurement video sources, multimedia adapters, broadcast monitoring equipment, and industrial vision panels. In such systems, the encoder provides a straightforward bridge from a digital YCrCb source to an analog television signal. Existing equipment can be refreshed without replacing the downstream analog display or capture subsystem, provided signal timing, impedance, and synchronization remain compatible. The primary design consideration is validating the complete interface rather than only the encoder function. Confirm the digital bus mapping, BT.601 versus BT.656 mode, sync polarity, output amplitude, reference clock arrangement, and analog termination against the exact datasheet revision. Preserve the exposed-pad land pattern and use a continuous ground plane where the device guidance permits; incorrect thermal-pad soldering can impair both heat transfer and high-speed signal integrity. This page consolidates the verified description, package information, source links, practical application guidance, and qualification limits for ADV7179KCP. It also distinguishes documented facts from unavailable electrical details, helping engineers locate an analog PAL/NTSC encoding solution without mistributing unreferenced specifications or treating a general cross-reference result as proof of drop-in compatibility.
ADV7179KCP-REEL - 10-Bit PAL/NTSC Video Encoder | Analog Devices (Tape & Reel)
Analog Devices ADV7179KCP-REEL is an integrated 10-bit PAL/NTSC analog video encoder with three DAC outputs and advanced power management, supplied in a 40-pin LFCSP with an exposed pad. It accepts digital CCIR-601 4:2:2, 8-bit component video and converts YCrCb data into a standard analog baseband television signal. According to the manufacturer datasheet, the device supports ITU-R BT.601 and BT.656 digital video interfaces and worldwide PAL and NTSC output standards. A video encoder is an interface IC that translates digital image data into a format that can be consumed by analog displays, broadcast equipment, recording systems, or other downstream video hardware. Within the broader product hierarchy, ADV7179KCP-REEL is a video encoder, interface converter, and signal-processing semiconductor rather than a general-purpose processor. Its fixed-function architecture performs color conversion and video encoding locally, reducing the processing burden on the surrounding digital system. The principal documented features include 10-bit conversion, three integrated DAC channels, PAL and NTSC generation, YCrCb input, and support for both BT.601 and BT.656 digital interfaces. Advanced power management is another stated product feature and can be valuable in portable or intermittently operated video equipment. These features make the encoder suitable for professional video, broadcast, industrial imaging, security, and legacy digital-video equipment where an analog composite output is required. The 40-pin LFCSP exposed-pad package supports compact, surface-mount PCB construction. Its exposed thermal pad provides a direct heat-spreading path to the PCB, but correct land-pattern implementation and adequate copper area are essential. The package also places the converter close to its digital video source, which can reduce routing requirements compared with a discrete implementation. Exact pin names, supply ratings, output levels, timing limits, and operating-temperature limits were not included in the retrieved verified data and therefore require confirmation in the manufacturer datasheet before design release. Typical uses include conversion of digital camera or graphics output into analog PAL or NTSC video, test and measurement video sources, multimedia adapters, broadcast monitoring equipment, and industrial vision panels. In such systems, the encoder provides a straightforward bridge from a digital YCrCb source to an analog television signal. Existing equipment can be refreshed without replacing the downstream analog display or capture subsystem, provided signal timing, impedance, and synchronization remain compatible. The primary design consideration is validating the complete interface rather than only the encoder function. Confirm the digital bus mapping, BT.601 versus BT.656 mode, sync polarity, output amplitude, reference clock arrangement, and analog termination against the exact datasheet revision. Preserve the exposed-pad land pattern and use a continuous ground plane where the device guidance permits; incorrect thermal-pad soldering can impair both heat transfer and high-speed signal integrity. This page consolidates the verified description, package information, source links, practical application guidance, and qualification limits for ADV7179KCP-REEL. It also distinguishes documented facts from unavailable electrical details, helping engineers locate an analog PAL/NTSC encoding solution without mistributing unreferenced specifications or treating a general cross-reference result as proof of drop-in compatibility.
ADV7180BCPZ - 10-Bit SDTV Video Decoder | Analog Devices
The Analog Devices ADV7180BCPZ is a 10-bit, 4× oversampling SDTV video decoder with three analog video input channels, automatic NTSC, PAL, and SECAM detection, and an 8-bit ITU-R BT.656-compatible digital output. It accepts a 1.0 V analog input range and operates from a 1.8 V core supply, with 1.8 V to 3.3 V I/O capability, in a 40-LFCSP-VQ package measuring 6 mm by 6 mm. A video decoder converts composite, Y/C, or component analog video into digital pixel and timing data. The ADV7180BCPZ belongs to the video decoder hierarchy within mixed-signal and digital signal processing semiconductors. Its internal 10-bit ADC samples CVBS at 4× oversampling, Y/C at 2× oversampling, and YPrPb at 2× oversampling per channel. On-chip antialiasing filtering supports the three analog input channels, while automatic color-standard detection simplifies multistandard system configuration. The decoder produces 4:2:2 component video compatible with the 8-bit ITU-R BT.656 interface. Its digital output can connect to MPEG encoders, codecs, mobile video processors, and other compatible digital video devices. A two-wire serial microprocessor interface provides I2C-compatible control, allowing software or hardware configuration of the decoder without a large parallel control bus. ADV7180BCPZ is fabricated using a 1.8 V CMOS process and is designed for low power dissipation in space-constrained systems. The analog signal range is 1.0 V, while separate digital I/O supply capability permits interfacing with systems operating at 1.8 V or 3.3 V. The device also includes a full-featured VBI data slicer with teletext support, a power-down mode, and an ultralow sleep-mode current option. Typical applications include analog television capture, industrial video inspection, broadcast monitoring, set-top-box video input, security surveillance, and embedded multimedia systems. In each case, the three-channel analog front end and automatic NTSC, PAL, and SECAM detection simplify the signal chain while the BT.656 output provides a standardized digital interface. PCB implementation should preserve the analog and digital return paths specified by the manufacturer and place decoupling capacitors close to their respective supply pins. Because the LFCSP-VQ package is compact and has many fine-pitch connections, follow the land pattern and exposed-pad assembly guidance in the ADV7180 datasheet. The manufacturer identifies the ADV7180 family as not recommended for new designs, so long-lived or new production programs should confirm lifecycle and sourcing implications before committing the device to a new board. This page summarizes the decoder architecture, operating conditions, application fit, and replacement constraints. It also organizes pin-compatible alternatives, practical layout considerations, and key selection trade-offs that are not consolidated in a single manufacturer resource.
ADV7180BCPZ-REEL - 10-Bit SDTV Video Decoder | Analog Devices (Tape & Reel)
The Analog Devices ADV7180BCPZ-REEL is a 10-bit, 4× oversampling SDTV video decoder with three analog video input channels, automatic NTSC, PAL, and SECAM detection, and an 8-bit ITU-R BT.656-compatible digital output. It accepts a 1.0 V analog input range and operates from a 1.8 V core supply, with 1.8 V to 3.3 V I/O capability, in a 40-LFCSP-VQ package measuring 6 mm by 6 mm. A video decoder converts composite, Y/C, or component analog video into digital pixel and timing data. The ADV7180BCPZ-REEL belongs to the video decoder hierarchy within mixed-signal and digital signal processing semiconductors. Its internal 10-bit ADC samples CVBS at 4× oversampling, Y/C at 2× oversampling, and YPrPb at 2× oversampling per channel. On-chip antialiasing filtering supports the three analog input channels, while automatic color-standard detection simplifies multistandard system configuration. The decoder produces 4:2:2 component video compatible with the 8-bit ITU-R BT.656 interface. Its digital output can connect to MPEG encoders, codecs, mobile video processors, and other compatible digital video devices. A two-wire serial microprocessor interface provides I2C-compatible control, allowing software or hardware configuration of the decoder without a large parallel control bus. ADV7180BCPZ-REEL is fabricated using a 1.8 V CMOS process and is designed for low power dissipation in space-constrained systems. The analog signal range is 1.0 V, while separate digital I/O supply capability permits interfacing with systems operating at 1.8 V or 3.3 V. The device also includes a full-featured VBI data slicer with teletext support, a power-down mode, and an ultralow sleep-mode current option. Typical applications include analog television capture, industrial video inspection, broadcast monitoring, set-top-box video input, security surveillance, and embedded multimedia systems. In each case, the three-channel analog front end and automatic NTSC, PAL, and SECAM detection simplify the signal chain while the BT.656 output provides a standardized digital interface. PCB implementation should preserve the analog and digital return paths specified by the manufacturer and place decoupling capacitors close to their respective supply pins. Because the LFCSP-VQ package is compact and has many fine-pitch connections, follow the land pattern and exposed-pad assembly guidance in the ADV7180 datasheet. The manufacturer identifies the ADV7180 family as not recommended for new designs, so long-lived or new production programs should confirm lifecycle and sourcing implications before committing the device to a new board. This page summarizes the decoder architecture, operating conditions, application fit, and replacement constraints. It also organizes pin-compatible alternatives, practical layout considerations, and key selection trade-offs that are not consolidated in a single manufacturer resource.
ADV7180BSTZ - 10-Bit SDTV Video Decoder | Analog Devices
The Analog Devices ADV7180BSTZ is a 10-bit SDTV video decoder that automatically converts analog baseband television signals into 4:2:2 component digital video data. It supports NTSC, PAL, and SECAM standards, operates from a 1.8 V analog, PLL, and digital core supply with a 1.8 V to 3.3 V I/O range, and is packaged in a 64-lead LQFP measuring 10 mm by 10 mm. A video decoder is an integrated circuit that reconstructs digital luminance and chrominance data from composite or component analog video. Its role within the video signal chain is to perform analog-to-digital conversion, color demodulation, and filtering before passing standardized component data to an encoder, scaler, capture controller, or display processor. The ADV7180 supports worldwide analog television standards and produces data compatible with the 8-bit ITU-R BT.656 interface. Key features include a 10-bit ADC with 4× oversampling for composite video, 2× oversampling for Y/C mode, and 2× oversampling for YPrPb input. Three video input channels include on-chip antialiasing filtering. The decoder provides full-featured VBI data slicing with WST teletext support, automatic standard detection, a 2-wire I2C-compatible control interface, power-down operation, and an ultralow sleep mode. The ADV7180 architecture separates analog input conditioning, clock recovery, demodulation, and digital output stages. Its three-input architecture allows a single decoder to serve composite video and Y/C sources without changing the board layout. The 8-bit BT.656 output connects directly to many MPEG encoders, codecs, and mobile video processors. A 57.27 MSPS sampling capability supports standard-definition television conversion while the on-chip antialias filter reduces unwanted out-of-band energy before digitization. Typical applications include analog surveillance camera capture, video-in-a-video processing, industrial inspection equipment, consumer video conversion, mobile video accessories, and broadcast monitoring. The decoder is especially useful when an existing NTSC, PAL, or SECAM source must be interfaced to an ITU-R BT.656 encoder or digital video processor. Designers should pay particular attention to analog input termination, grounding, clock generation, I/O voltage compatibility, and register configuration. The 1.0 V analog input range leaves limited headroom for signal conditioning, so source amplitude and clamp levels must be checked against the input specification before PCB layout is released. This page organizes lifecycle status, electrical characteristics, package details, cross-reference candidates, and practical integration considerations. It also highlights the differences between the ADV7180 and the ADV7120, ADV7123, and MAX9526 families so that legacy and redesign decisions can be made with the correct technical trade-offs.
ADV7180BSTZ-REEL - 10-Bit SDTV Video Decoder | Analog Devices (Tape & Reel)
The Analog Devices ADV7180BSTZ-REEL is a 10-bit SDTV video decoder that automatically converts analog baseband television signals into 4:2:2 component digital video data. It supports NTSC, PAL, and SECAM standards, operates from a 1.8 V analog, PLL, and digital core supply with a 1.8 V to 3.3 V I/O range, and is packaged in a 64-lead LQFP measuring 10 mm by 10 mm. A video decoder is an integrated circuit that reconstructs digital luminance and chrominance data from composite or component analog video. Its role within the video signal chain is to perform analog-to-digital conversion, color demodulation, and filtering before passing standardized component data to an encoder, scaler, capture controller, or display processor. The ADV7180 supports worldwide analog television standards and produces data compatible with the 8-bit ITU-R BT.656 interface. Key features include a 10-bit ADC with 4× oversampling for composite video, 2× oversampling for Y/C mode, and 2× oversampling for YPrPb input. Three video input channels include on-chip antialiasing filtering. The decoder provides full-featured VBI data slicing with WST teletext support, automatic standard detection, a 2-wire I2C-compatible control interface, power-down operation, and an ultralow sleep mode. The ADV7180 architecture separates analog input conditioning, clock recovery, demodulation, and digital output stages. Its three-input architecture allows a single decoder to serve composite video and Y/C sources without changing the board layout. The 8-bit BT.656 output connects directly to many MPEG encoders, codecs, and mobile video processors. A 57.27 MSPS sampling capability supports standard-definition television conversion while the on-chip antialias filter reduces unwanted out-of-band energy before digitization. Typical applications include analog surveillance camera capture, video-in-a-video processing, industrial inspection equipment, consumer video conversion, mobile video accessories, and broadcast monitoring. The decoder is especially useful when an existing NTSC, PAL, or SECAM source must be interfaced to an ITU-R BT.656 encoder or digital video processor. Designers should pay particular attention to analog input termination, grounding, clock generation, I/O voltage compatibility, and register configuration. The 1.0 V analog input range leaves limited headroom for signal conditioning, so source amplitude and clamp levels must be checked against the input specification before PCB layout is released. This page organizes lifecycle status, electrical characteristics, package details, cross-reference candidates, and practical integration considerations. It also highlights the differences between the ADV7180 and the ADV7120, ADV7123, and MAX9526 families so that legacy and redesign decisions can be made with the correct technical trade-offs.
ADV7180KCP32Z - 10-Bit SDTV Video Decoder | Analog Devices
The Analog Devices ADV7180KCP32Z is a 10-bit, 4× oversampling standard-definition television video decoder with support for NTSC, PAL, and SECAM, an I2C control interface, and a serial ITU-R BT.656 output in a 32-LFCSP package measuring 5 mm by 5 mm. The device converts analog composite baseband video into digital component-video data for downstream encoders, codecs, mobile video processors, and digital camera systems. Its 10-bit processing provides 1024 digital code levels for each component channel, while automatic input-format detection simplifies system configuration. A video decoder is an interface IC that reconstructs digital luminance and chrominance information from an analog television composite signal. It sits between an analog video front end and a digital media pipeline. The ADV7180 family combines analog-to-digital conversion, demodulation, color decoding, and formatting into one device. This integration reduces the number of discrete signal-processing blocks required for standard-definition television, surveillance, image-capture, and legacy video-input applications. Principal features include automatic recognition of worldwide NTSC, PAL, and SECAM signals, 4× oversampling, and an 8-bit-compatible ITU-R BT.656 serial output. The serial interface can connect to MPEG encoders, video codecs, mobile video processors, and digital video processing blocks without requiring a separate external data-format converter. An I2C interface provides host access to device control functions. The compact 32-LFCSP package also supports space-constrained portable and embedded equipment designs. The decoder architecture is tailored to composite analog video rather than general-purpose image sensing. The internal conversion and demodulation stages produce synchronized component-video data, while the output stage presents that data in a standardized serial format. Because the ADV7180KCP32Z targets standard-definition formats, it is not a substitute for a high-definition or modern all-pixel image sensor. The system must provide a suitable analog video input, stable synchronization reference, correct I2C addressing, and power rails appropriate for the complete analog and digital sections. Typical applications include digital cameras, mobile phones, portable video equipment, video capture systems, and embedded multimedia products that still accept NTSC, PAL, or SECAM composite video. In these systems, the ADV7180KCP32Z converts the legacy composite input into a digital stream that a downstream codec, encoder, storage controller, or display pipeline can process. The 5 mm by 5 mm LFCSP footprint is particularly useful where analog video support must be added without occupying a large board area. PCB implementation requires careful treatment of the analog input, digital output, supply, and exposed-pad connections. The manufacturer ADV7180 schematic checklist should be used during design review to validate component values, net names, layer stack assumptions, and the final reference schematic. Maintain short return paths around the analog input and supply pins, and provide the decoupling and exposed-pad land pattern prescribed by the package drawing. This product page combines the manufacturer’s decoder capabilities, package information, lifecycle status, sourcing path, interface guidance, and application analysis into one engineering-oriented reference. It also distinguishes true package-compatible alternatives from broader functional equivalents so that designers can assess PCB reuse before changing an approved design.
ADV7180WBST48Z - 10-Bit SDTV Video Decoder | Analog Devices
Analog Devices ADV7180WBST48Z is a 10-bit, 4× oversampling SDTV video decoder with support for NTSC, PAL, and SECAM signals, supplied in a 48-LQFP 7 mm × 7 mm package. It converts standard analog baseband television signals into 4:2:2 component-video data and provides a serial ITU-R BT.656 output alongside I²C control. A video decoder is an interface IC that recovers digital pixel data from an analog composite or component video signal. Within the signal-chain hierarchy, the ADV7180 sits between an analog video input and downstream MPEG encoders, codecs, mobile video processors, or other digital video-processing equipment. Its primary purpose is to normalize regional analog television formats into a standardized digital-video representation. The decoder's 10-bit processing resolution provides the headline quantization level, while 4× oversampling supports the analog-to-digital conversion stage. Automatic input-format detection is designed to simplify decoding of NTSC, PAL, and SECAM sources. The serial ITU-R BT.656 output can connect to compatible downstream processors, and the I²C interface provides a standardized control path for configuration and device management. The ADV7180 family uses monolithic CMOS construction to combine analog decoding and digital output functionality with lower power dissipation than a discrete implementation. The ADV7180WBST48Z is packaged in a 48-lead LQFP measuring 7 mm × 7 mm, providing a conventional surface-mount option for industrial, consumer, and legacy video-processing equipment. Analog Devices marks the ADV7180 as not recommended for new designs, so it is primarily relevant to maintenance, repair, and previously designed systems. Typical uses include converting legacy analog television or surveillance-video sources into digital component data, supporting video capture in professional equipment, and interfacing analog broadcast standards with embedded video processors. The standardized 4:2:2 output format and BT.656 serial interface make the device useful when the downstream system already expects parallel-component-video timing. Designers should preserve the package's analog and digital supply arrangement, provide the decoupling and clocking required by the manufacturer application guidance, and verify signal amplitude and synchronization behavior before enabling output. Because the device is not recommended for new designs, new platforms should evaluate current decoding solutions unless compatibility with an existing ADV7180 circuit is mandatory. This product page brings together device specifications, lifecycle status, application guidance, package considerations, and a verified drop-in replacement assessment. It also distinguishes a functionally identical ordering option from true engineering alternatives, helping engineers decide when PCB reuse is justified and when a legacy decoder should remain in service.
ADV7180WBSTZ - 10-Bit SDTV Video Decoder | Analog Devices
Analog Devices ADV7180WBSTZ is a 10-bit, 4× oversampling SDTV video decoder that automatically detects and converts worldwide NTSC, PAL, and SECAM analog baseband television signals into 4:2:2 component video data. The device supports an I2C-compatible control interface and serial ITU-R BT.656 output in a 64-lead LQFP package measuring 10 mm by 10 mm. An analog video decoder is a signal-conversion integrated circuit that accepts legacy composite or component video and produces digital component data for subsequent image processing, encoding, capture, or display. Within the broader semiconductor hierarchy, the ADV7180 belongs to the video-processing IC category, uses an analog-to-digital conversion stage, and connects to host processors through a serial digital-video interface. Its ITU-R BT.656 output is designed for direct connection with suitable MPEG encoders, codecs, mobile video processors, and digital video systems. The manufacturer identifies several functional characteristics of the ADV7180 family. It automatically recognizes NTSC, PAL, and SECAM signals, supports full-featured VBI data slicing with teletext support, and includes a two-wire serial microprocessor interface compatible with I2C. The analog input signal range is 1.0 V. Separate 1.8 V analog, PLL, and digital supplies support low-voltage system design, while the digital I/O supply can operate from 1.8 V through 3.3 V. Power-down and ultralow sleep modes help reduce consumption when the video path is inactive. The ADV7180 converts standard-definition television signals into 4:2:2 component video data compatible with the 8-bit ITU-R BT.656 interface. Its 4× oversampling architecture supports accurate reconstruction of the incoming analog waveform before digital conversion. The parallel functional blocks include analog input conditioning, automatic standard detection, demodulation, digital conversion, output formatting, VBI processing, and host-register control. The I2C-compatible interface allows a system controller to configure operating registers and monitor decoder status. Typical uses include analog-video capture systems, video surveillance equipment, broadcast monitoring, industrial inspection equipment, consumer video conversion, and embedded multimedia platforms. A television signal enters the analog input section, passes through standard-detection and decoding circuitry, and leaves the device as serial component-video data for an encoder, codec, processor, or display controller. The decoder can therefore bridge an installed analog-video source to a modern digital video pipeline without requiring the downstream processor to perform analog demodulation. Designers should verify the analog input topology, clocking, supply sequencing, I/O voltage, and register configuration against the Analog Devices ADV7180 datasheet. Decoupling should follow the datasheet's recommended network, and the serial output routing must preserve signal integrity because video timing and impedance discontinuities can affect downstream capture reliability. The device also requires attention to thermal performance and the 1.0 V analog input range when designing the preceding amplifier or termination stage. This product page consolidates the confirmed ADV7180WBSTZ capabilities, package information, application guidance, design considerations, and qualified replacement information. It also distinguishes confirmed drop-in options from merely similar devices, helping engineers make PCB, firmware, and production decisions with fewer component-level assumptions.
ADV7181BBCPZ 10-Bit Multiformat Video Decoder | Analog Devices
Analog Devices ADV7181BBCPZ is an integrated multiformat SDTV video decoder and RGB graphics digitizer that converts analog baseband television signals into digital component-video data. The device supports NTSC, PAL, and SECAM inputs and produces 8-bit 4:2:2 component video compatible with the component-video interface used by digital video capture and processing systems. It is supplied in a 64-lead exposed-pad VFQFN package for surface-mount production. A video decoder is an interface IC that translates legacy composite or S-Video signals into a digital representation suitable for subsequent processing. In the broader semiconductor hierarchy, the ADV7181 belongs to the video decoder, analog-to-digital interface, signal-conversion, and interface-IC families. It is commonly associated with ITU-R BT.656-style digital video interfaces and converts analog television signals into component data that can be captured, processed, stored, or displayed. The ADV7181C family provides four 10-bit analog-to-digital converters sampling at 110 MHz. It offers six analog input channels, internal antialias filtering, and SCART fast-blank support. NTSC, PAL, and SECAM recognition allows one decoder design to accommodate multiple regional television standards. The manufacturer describes ADLLT, or Adaptive Digital Line Length Tracking, as a feature intended to improve digital video capture, processing, and display performance. Analog signal processing requires a 3.15 V to 3.45 V supply, while the associated digital interface operates from 1.65 V to 2 V according to the product information. Separating these supply domains supports integration with digital video processors that use lower interface voltages. The exposed thermal pad in the 64-VFQFN package provides a direct thermal path to the PCB, but careful layout is needed to distribute heat while preserving high-speed analog and digital signal integrity. Typical uses include digital television receivers, set-top boxes, video recorders, picture-in-picture systems, industrial monitoring equipment, and RGB graphics digitizers. These applications benefit from automatic detection of NTSC, PAL, and SECAM, broad analog input support, and conversion into digital component-video data. Designers should treat the analog input network, supply filtering, clocking, and digital video interface as one tightly coupled system. Place decoupling capacitors close to the relevant supply pins, keep sensitive analog traces away from the digital video outputs, and use a continuous ground reference. Validate the complete channel, timing, and synchronization behavior against the selected video standard. This product page combines the manufacturer description, package and lifecycle information, documented decoder features, application analysis, and replacement guidance to support design and sourcing decisions for the ADV7181BBCPZ.
ADV7181BBSTZ - 10-Bit Multiformat Video Decoder | Analog Devices
The Analog Devices ADV7181BBSTZ is a 10-bit, integrated multiformat SDTV video decoder and RGB graphics digitizer with four 110 MHz ADCs, six analog input channels, and a 64-lead LQFP package. It automatically detects NTSC, PAL, and SECAM analog baseband television signals and converts them into component-video data compatible with 8-bit or 16-bit CCIR601/CCIR656 interfaces. An integrated video decoder is a semiconductor that digitizes legacy analog television signals and reconstructs digital luminance and chrominance samples for subsequent processing. Within the interface-IC hierarchy, the ADV7181BBSTZ combines analog-to-digital conversion, synchronization, color decoding, and digital video output into one device. This reduces the component count and board complexity required by a discrete video-capture design. The principal features include four 10-bit ADCs operating at up to 110 MHz, six analog input channels, internal antialias filters, automatic multiformat detection, SCART fast-blank support, and support for NTSC, PAL, and SECAM decoding. Adaptive Digital Line Length Tracking, or ADLLT, provides the timing support needed for digital video capture, processing, and display systems operating with variable or imperfect source timing. The decoder accepts standard analog baseband composite video and produces 4:2:2 component data. Its four ADC paths provide the sampling resources required to digitize composite video while supporting multiple source connections. The B revision is described by Analog Devices as improving performance for noisy or weak signals, improving VCR locking capability, and adding decoder refinements compared with earlier ADV7181 revisions. Typical uses include professional broadcast video monitoring, video capture and conversion equipment, industrial vision panels, legacy multimedia systems, and displays that must accept NTSC, PAL, or SECAM sources. The six-channel analog interface also makes the device useful in systems that need flexible routing among several baseband video inputs. When laying out a design, treat analog video routing, grounding, and connector return paths as carefully as the digital video outputs. Keep the analog input network away from switching nodes and provide clean supply decoupling at the device. Confirm the required CCIR601 or CCIR656 interface mode, pixel clock, voltage levels, and supported synchronization standard before finalizing the FPGA or display controller configuration. This product record combines the Analog Devices decoder capabilities with package and cross-reference information, practical analog-video design guidance, application-oriented selection criteria, and a focused comparison of compatible ADV7181 family options. It is intended to accelerate engineering evaluation while preserving the distinction between confirmed device functions and parameters that still require manufacturer-document confirmation.
ADV7181BCP - Multiformat Video Decoder | Analog Devices
The Analog Devices ADV7181BCP is a multiformat SDTV video decoder that automatically detects and converts NTSC, PAL, and SECAM analog baseband television signals into 8-bit precision 4:2:2 component-video data. The device integrates three 54 MHz, 9-bit ADCs clocked from a single 27 MHz crystal and is supplied in a 64-lead LFCSP-VQ package measuring 9 mm by 9 mm. It is intended for video capture, processing, and display systems that require automatic analog-format recognition. A video decoder is an interface IC within the broader video-processing hierarchy. It receives composite, S-Video, or supported component-video signals, digitizes the analog waveforms, extracts luminance and chrominance information, and presents the decoded result to a digital video pipeline. The ADV7181BCP therefore sits between legacy analog video sources and digital processors, displays, recorders, and transmission equipment. Key features include automatic NTSC, PAL, and SECAM detection, three integrated 9-bit ADCs, and a common 27 MHz crystal reference. The decoder supports the NTSC-M, NTSC-N, and NTSC-4.43 variants identified in the retrieved manufacturer information, along with PAL-B, PAL-D, PAL-G, PAL-H, PAL-I, PAL-M, and PAL-N. Its 8-bit 4:2:2 output provides a practical digital component-video interface for downstream processing. ADI describes the ADV7181 as a new-generation integrated video decoder using Adaptive Digital Line Length Tracking, or ADLLT. This technology is intended to improve digital video capture, processing, and display performance by automatically adapting the decoder to varying analog line lengths. The integrated ADCs reduce the number of separate data converters required in an analog-video front end while centralizing synchronization around one crystal source. Typical uses include SDTV capture equipment, set-top boxes, video recorders, industrial monitoring systems, broadcast processing, and consumer display products. In a composite-video design, the analog input is routed to the decoder and the resulting digital video is passed to a scaler, image processor, display controller, or storage device. Engineers must still verify voltage levels, timing, exposed-pad layout, analog input conditioning, and software-register compatibility against the manufacturer datasheet. A critical design consideration is that this highly integrated decoder does not eliminate the need for careful PCB implementation. Analog inputs should be routed away from digital clocks and switching nodes, while the exposed pad requires the datasheet-recommended thermal and electrical layout. Input filtering, grounding, power sequencing, and crystal-layout guidance should be followed directly rather than inferred from generic video-decoder practice. This page consolidates the verified manufacturer description, distributor availability information, same-family alternatives, comparison parameters, and practical selection guidance. It also distinguishes documented specifications from unresolved supply, electrical, timing, and lifecycle details rather than estimating missing values.
ADV7181BST Multiformat SDTV Video Decoder | Analog Devices
Analog Devices ADV7181BST is a multiformat standard-definition television video decoder IC that automatically detects NTSC, PAL, or SECAM analog baseband signals and converts them into 8-bit precision 4:2:2 component video data. It is supplied in a 64-lead LQFP surface-mount package and is designed for digital video capture, processing, and display systems requiring compatibility with worldwide analog television standards. An analog video decoder is an interface IC that recovers timing and separates luminance and chrominance information from a composite or component baseband video signal. Within the semiconductor hierarchy, the ADV7181BST is a video interface IC, decoder IC, and signal-processing semiconductor. Its decoded output uses the 4:2:2 component format and is compatible with 8-bit and 16-bit CCIR601 or CCIR656 digital video interfaces. The principal feature is automatic detection of NTSC, PAL, and SECAM standards, reducing the need for separate decoders or extensive manual mode configuration. The device accepts standard analog baseband television signals and produces digital component-video data suitable for subsequent scaling, processing, encoding, capture, or display. This combination makes it useful in professional video equipment, television receivers, video capture systems, surveillance equipment, industrial imaging systems, and legacy audiovisual installations. Analog Devices describes the ADV7181 as using ADLLT, or Adaptive Digital Line Length Tracking, technology. According to the manufacturer product information, this technology provides advantages for digital video capture, processing, and display applications. A more recent ADV7181B product page states that its B revision improves performance for noisy or weak signal inputs and improves VCR locking capability. Those revision-level improvements should not automatically be attributed to ADV7181BST without checking the exact ordering code and its datasheet revision. The ADV7181BST operates as a high-volume analog-to-digital video interface function. Designers must provide suitable analog input routing, stable supply rails, compliant clocking, and an appropriate digital output destination. Because this is a multiformat legacy-standard decoder rather than a modern compressed-video processor, it is most appropriate where an equipment block still receives NTSC, PAL, or SECAM baseband video and requires standardized digital component-video output. For implementation, pin assignment, supply voltage, clock requirements, and analog input configuration should be taken directly from the manufacturer documentation for the exact ADV7181BST ordering code. The available web information confirms the decoder function, supported standards, output format, digital-interface compatibility, package family, and ADLLT technology, but it does not provide a complete electrical characteristic table or verified operating limits. Those details should therefore be confirmed before schematic capture, timing design, or production release. This page synthesizes the verified manufacturer description, distributor pricing indication, package information, and drop-in-family comparison data to support engineering selection. It distinguishes confirmed ADV7181BST capabilities from unverified electrical parameters and highlights the limited number of pin-compatible replacements supported by the supplied cross-reference results.
ADV7181CBCPZ 10-Bit HDTV Video Decoder | Analog Devices
The Analog Devices ADV7181CBCPZ is a 10-bit integrated multiformat SDTV video decoder and RGB graphics digitizer with four 10-bit ADCs sampling up to 110 MHz, six analog input channels, and digital ITU-R BT.656 output. The device supports PAL, NTSC, and SECAM decoding from composite or S-Video sources and is housed in a 64-LFCSP-VQ surface-mount package measuring 9 mm by 9 mm. A video decoder is an interface IC that converts legacy analog baseband video into a digital representation suitable for processing by an FPGA, SoC, frame grabber, display controller, or video capture system. This device sits between external analog connectors and digital video logic, combining analog-to-digital conversion, color decoding, filtering, and standard detection. Its position in the signal chain makes it useful for legacy video compatibility within industrial control, broadcast, surveillance, conferencing, and professional display systems. The principal features include four 10-bit ADCs capable of sampling to 110 MHz, six analog input channels, SCART fast-blank support, internal antialias filters, and automatic handling of NTSC, PAL, and SECAM color standards. The 10-bit conversion resolution preserves fine luminance and chroma detail, while support for both composite and S-Video reduces the number of external signal-conditioning paths required in a multi-standard design. Technically, the ADV7181CBCPZ combines analog front-end sampling with digital color demodulation and output formatting. The product description identifies conversion into digital ITU-R BT.656 format, enabling connection to digital video processors using parallel or appropriately configured serialized digital interfaces. Internal antialias filtering helps constrain out-of-band energy before decoding, while fast-blank handling supports SCART-based source equipment. Typical applications include professional video monitoring, legacy broadcast equipment, industrial inspection, secure video systems, set-top and video-processing designs, and graphics-digitizing systems. The component is particularly appropriate when an existing PAL, NTSC, or SECAM installation must coexist with a modern digital video pipeline. Designers should follow the manufacturer datasheet for the exact 64-pin assignments, analog input routing, digital output mapping, supply sequencing, reference requirements, exposed-pad connection, and recommended decoupling. Signal integrity and layout are especially important around analog inputs, clocking, and digital outputs, so controlled-impedance routing and a quiet return path should be planned before layout release. This product record combines the manufacturer function description with package information, interface details, source-level selection guidance, and practical implementation considerations. It is intended to accelerate component identification, legacy-video architecture planning, and direct comparison with compatible Analog Devices decoder options.
ADV7181DBCPZ-RL 10-Bit Multiformat Video Decoder | Analog Devices
The Analog Devices ADV7181DBCPZ-RL is a 10-bit single-chip multiformat video decoder and graphics digitizer with four ADC inputs, supporting PAL, NTSC, and SECAM composite or S-Video signals and producing digital ITU-R BT.656 output. It is packaged in a 64-lead LFCSP-VQ surface-mount package measuring 9 mm by 9 mm. A video decoder is an interface IC that converts analog television signals into a standardized digital pixel stream. In the signal-chain hierarchy, it sits between composite or S-Video inputs and an FPGA, ASIC, display controller, or digital video processor. Its conversion stage, adaptive filtering, demodulation, and output formatting allow a compact system to process legacy broadcast video without implementing those functions in external discrete components. The ADV7181D supports PAL, NTSC, and SECAM decoding and accepts composite or S-Video input. Its digital interface produces ITU-R BT.656 data, while the advertised 10-bit digitization provides the key conversion resolution. The four ADC inputs add flexibility for multi-channel or multi-source capture, and the integrated decoder reduces component count in industrial monitoring, broadcast, professional video, and legacy conversion systems. The ADV7181D combines analog front-end conversion, multiformat demodulation, and digital output formatting in one device. Its digital supply range is 1.65 V to 2 V, while its analog supply range is 3.15 V to 3.45 V, allowing separate digital and analog rails in systems with independently regulated voltage domains. The exact operating-junction limits, clocking requirements, register set, and input performance must be confirmed from the manufacturer datasheet before layout is finalized. Typical uses include PAL or NTSC video capture, SECAM source conversion, industrial inspection equipment, video capture cards, surveillance systems, and professional video conversion. A suitable design must route the selected analog source into the correct ADC input, provide compatible clocking and digital interface connections, and configure the decoder registers for the intended standard and output format. PCB implementation requires careful separation of analog and digital supply paths, short analog traces, a solid ground plane, and low-impedance connections to the digital output interface. The exposed pad requires the manufacturer’s specified thermal-via and solder-land geometry. Use the Analog Devices pin-description table to assign all 64 package connections before schematic capture and PCB routing. This page organizes the confirmed decoding capabilities, supply requirements, package details, sourcing information, and drop-in alternatives into an engineering-oriented reference. It also highlights package, temperature-range, and automotive qualifications that should be checked against the complete manufacturer datasheet before production release.
ADV7182ABCPZ-RL - 10-Bit SDTV Video Decoder | Analog Devices
The Analog Devices ADV7182ABCPZ-RL is a 10-bit SDTV video decoder with differential inputs in a 32-LFCSP 5 x 5 mm package. It detects analog baseband video signals compatible with worldwide NTSC, PAL, and SECAM standards and converts them into 4:2:2 component-video data. The serial output supports the ITU-R BT.656 interface, while I2C provides configuration and control. A video decoder is an interface IC that converts composite or component analog video into digital pixel data for processing, display, capture, or transmission. In the system hierarchy, the ADV7182ABCPZ-RL belongs to the video decoder class of interface ICs and bridges legacy analog video sources with digital video processors, LCD controllers, video ASICs, and embedded imaging systems. The decoder automatically identifies NTSC, PAL, and SECAM analog baseband inputs, reducing the need for separate conversion paths. Its 10-bit conversion resolution preserves more amplitude detail than an 8-bit decoder, while the resulting YCbCr 4:2:2 stream provides the chroma subsampling commonly required by digital video interfaces. Differential inputs are intended for noise-rejecting connections from suitable analog front ends. The ADV7182A architecture uses a single 10-bit analog-to-digital converter and an on-chip differential input stage. It produces 8-bit-compatible ITU-R BT.656 data, and external horizontal sync, vertical sync, and field signals can supply timing references to LCD controllers and other video ASICs. I2C configuration supports integration into systems where register-based control is more practical than fixed hardware settings. Typical uses include industrial vision equipment, professional video conversion, surveillance systems, broadcast equipment, medical imaging interfaces, and legacy video capture products. The decoder is particularly useful when a system must accept several international analog video standards and present the result to a digital processing chain without deploying separate decoder boards for each format. Designers should follow the manufacturer datasheet for the 32-lead LFCSP land pattern, analog input routing, bypass and decoupling capacitors, clock requirements, and register initialization. Differential input layout, grounding, and connector isolation are especially important because video decoding performance can be affected by noise coupling and impedance mismatch. This page combines the Analog Devices product description, lifecycle designation, package and interface details, equivalent-family guidance, and engineering-oriented comparison information. It also explains where to obtain the datasheet and how to assess replacement options for redesigned or legacy video systems.
ADV7182BCPZ - 10-Bit SDTV Video Decoder | Analog Devices
Analog Devices ADV7182BCPZ is a 10-bit SDTV video decoder with differential inputs, automatic support for NTSC, PAL, and SECAM analog baseband video, and digital output through a serial ITU-R BT.656 interface. The device also uses an I2C control interface and is packaged in a 32-LFCSP measuring 5 mm by 5 mm. A video decoder is an interface IC that converts legacy composite or component analog video into a digital component-video stream. In the signal hierarchy, the ADV7182BCPZ belongs to the video processing and interface IC category, where it bridges analog audiovisual equipment and digital video processors. Its 4:2:2 component output can be routed into an image processor, video controller, display controller, or digital recording system. The principal features of the ADV7182BCPZ include a 10-bit conversion path, differential analog inputs, automatic detection of worldwide analog video standards, and an 8-bit ITU-R BT.656-compatible output. These characteristics make the decoder useful when a system must accept analog camera, broadcast, surveillance, or legacy consumer-video signals while presenting the resulting data to digital logic. The I2C interface supports configuration and control by a host processor. Analog Devices describes the ADV7182 as a versatile one-chip multiformat decoder that automatically detects standard analog baseband video. This simplifies the front end of a system because firmware can identify the incoming format rather than requiring a separate format-selection mechanism. The resulting YCbCr 4:2:2 component stream is compatible with digital video processing pipelines, although system-level timing, blanking, and synchronization must still be handled correctly. Typical applications include analog surveillance-camera interfaces, professional video conversion equipment, industrial inspection systems, video capture and recording products, broadcast monitoring equipment, and legacy audiovisual system upgrades. Differential inputs are particularly useful when the analog source can be connected with balanced routing, reducing susceptibility to ground-noise coupling in longer or noisier interconnects. The 5 mm by 5 mm LFCSP requires careful PCB layout to preserve signal integrity and thermal performance. Place input and digital-interface circuitry according to the manufacturer pin-description and application guidance, keep analog and digital return-current paths controlled, and provide the required bypass capacitors close to the supply pins. Because Analog Devices marks the ADV7182 family as not recommended for new designs, engineers should also evaluate current video-decoder options when starting a new platform rather than assuming this device is the best long-term choice. This page combines the verified ADV7182BCPZ product characteristics with practical interface guidance, drop-in candidate analysis, parameter comparisons, and design considerations. It distinguishes the verified function and package facts from information that must be confirmed in the manufacturer datasheet before schematic release or production qualification.
ADV7182WBCPZ - 10-Bit 4-Channel SDTV Video Decoder | Analog Devices
Analog Devices ADV7182WBCPZ is a 10-bit SDTV video decoder with differential inputs and four analog video input channels, converting worldwide NTSC, PAL, and SECAM composite, S-Video, and YPrPb component baseband signals into a 4:2:2 component video data stream, in a 32-LFCSP (5x5 mm) surface-mount package. A video decoder is a signal-chain IC inside the broader video processing hierarchy: composite or component analog video enters the device, is sampled by an internal analog-to-digital converter, demodulated and color-decoded, and is delivered as digital pixel data to a host processor, scaler, or encoder. Video decoders sit between legacy analog AV infrastructure and modern digital video pipelines, and they typically fall under interface and video processing ICs rather than generic data converters. Key features of the ADV7182 include one 10-bit ADC with 4x oversampling per channel for CVBS, Y/C, and YPrPb operation, four analog input channels with on-chip antialiasing filtering, and support for fully differential, pseudo-differential, and single-ended CVBS video inputs. Analog input range extends up to 4 V, and the decoded output is compatible with the 8-bit ITU-R BT.656 serial interface format. A host I2C interface provides register control, and the device automatically detects and locks to the incoming video standard. Architecturally, the device integrates analog front end, ADC, demodulator, color processing, and digital output in one silicon die, which removes the need for external sync separators and separate A/D stages. Automatic standard detection means the same board supports NTSC, PAL, and SECAM sources without firmware changes, and the 4:2:2 output format drops chroma resolution by half while preserving full luma detail, matching the expected data rate of the ITU-R BT.656 link. Typical applications include professional broadcast and studio equipment, industrial video inspection and machine vision cameras, security and surveillance camera control paths, automotive infotainment rear-view camera decoding, video walls and matrix switchers, and legacy CVBS-to-digital video gateways where an eight-bit digital output stream is required. A key design consideration is that the ADV7182 is flagged by Analog Devices as not recommended for new designs, so new programs should confirm the current recommended decoder family before committing to a new PCB footprint. The 32-LFCSP footprint also demands careful routing of the differential analog video inputs away from digital clocks and switching regulators. This page consolidates the manufacturer data sheet highlights, drop-in replacement options within the same 32-LFCSP footprint, interface and package guidance, and practical application notes so that engineers can qualify or replace the part without first rebuilding the full design context.
ADV7183AKST - Multiformat SDTV Video Decoder | Analog Devices
Analog Devices ADV7183AKST is a multiformat SDTV video decoder with three 10-bit ADCs, 54 MHz sampling capability, and a single 27 MHz crystal clock. It converts analog NTSC, PAL, and SECAM baseband television signals into 4:2:2 component digital video and is packaged in an 80-lead LQFP surface-mount package. The device supports 8-bit and 16-bit CCIR601 and CCIR656 output formats. An integrated video decoder converts legacy analog composite or component television signals into digital pixel data that processors, display controllers, recorders, and image-processing systems can process. In the signal-chain hierarchy, the ADV7183AKST combines analog-to-digital conversion, automatic video-standard detection, chroma decoding, filtering, and digital output into one integrated interface IC. This consolidation reduces the number of discrete signal-processing stages required around an analog video source. Three integrated 10-bit ADCs provide simultaneous digitizing capability for the analog input channels. Their 54 MHz sampling rate supports multiformat standard-definition television decoding, while automatic NTSC, PAL, and SECAM recognition simplifies source compatibility. A single 27 MHz crystal provides the timing reference for the integrated converters and digital processing. The decoder outputs 4:2:2 component data through a flexible digital interface supporting 16-bit and 8-bit CCIR601 or CCIR656 operation. The ADV7183A architecture is intended for systems requiring reliable conversion of composite or analog component video without a collection of separate decoder ICs. Automatic standard detection reduces firmware-dependent setup, and the 4:2:2 output preserves chroma information in a format commonly consumed by video processors. The digital output can be configured for frame-buffer capture, real-time scaling, recording, or embedded image processing. Its broad format support makes one decoder suitable for multiple television standards encountered in legacy equipment and regional analog broadcasts. Typical uses include analog broadcast receivers, projectors, security-camera DVR systems, video recorders, industrial monitoring equipment, and consumer television electronics. The device can also serve test and measurement systems that need to digitize standard-definition analog video for analysis. These applications benefit from the integrated three-ADC architecture and automatic format recognition, especially where board space and external component count are important. When designing around the ADV7183AKST, preserve the analog input bandwidth and isolation required by the selected television standard. Follow the manufacturer pin description and reference circuitry when assigning tracks, grounding, clocking, and digital interface connections. Keep sensitive analog inputs away from high-current switching paths, and use controlled impedance routing for the digital video outputs to reduce timing and reflection problems. This product page organizes the decoder function, verified electrical characteristics, family alternatives, interface considerations, and application guidance into an engineering-focused reference. It also distinguishes the ADV7183AKST from closely related ADV7183 and ADV7183A variants so designers can identify the correct ordering code without assuming that related decoder options are automatically interchangeable.
ADV7183BBSTZ - 10-Bit Multiformat Video Decoder | Analog Devices
Analog Devices ADV7183BBSTZ is a 10-bit multiformat NTSC, PAL, and SECAM analog video decoder with three integrated 54 MHz ADCs, an 8-bit 4:2:2 component-video output, and an 80-lead LQFP package measuring 14 x 14 mm. An integrated video decoder converts analog composite or component television signals into digital component-video data for subsequent processing by a video processor, display controller, capture system, or digital interface. The ADV7183B family automatically detects worldwide analog television standards, reducing the need for separate analog front-end components. Its output is compatible with 8-bit CCIR601 and CCIR656 digital video formats, while its flexible digital interface supports line-locked, clock-based systems. Key capabilities include automatic recognition of NTSC variants J, M, and 4.43; PAL variants B, D, G, H, I, M, and N; and SECAM. Three integrated 10-bit ADCs provide simultaneous analog-to-digital conversion, while a single 27 MHz crystal clocks the decoder. The B revision adds improved performance for noisy or weak input signals and better VCR locking capability compared with earlier ADV7183 behavior. The 8-bit 4:2:2 output represents luminance and chrominance information in a format compatible with CCIR601 and CCIR656 interfaces. This architecture is useful when an analog television source must be transferred into a digital processing chain without employing a separate set of external ADCs. The decoder also supports professional and consumer equipment that must accept multiple television standards through a common input stage. Typical applications include broadcast video equipment, tape-based sources, professional video systems, projectors, video recorders, and surveillance cameras. Automatic standard detection simplifies multi-format installations, while integrated ADCs reduce the component count and board area required around the analog input. The digital output can feed downstream logic when the host processor supports the applicable CCIR data format and timing. PCB implementation requires careful treatment of the analog inputs because composite video contains substantial high-frequency content. Keep analog traces short, provide a continuous ground reference, isolate noisy digital switching paths, and follow the recommended input filtering and component-placement guidance in the manufacturer datasheet. Confirm interface voltage levels, clocking, and synchronization requirements for the specific host processor before releasing the layout. This page organizes the ADV7183BBSTZ decoder capabilities, application guidance, package information, and procurement references into an engineering-focused selection resource. It also distinguishes documented device functions from interface decisions that remain specific to the end product, helping teams evaluate the decoder before beginning board-level implementation.