بەرهەمەکان (130+)

ADV7183BKSTZ - 10-Bit Multiformat Video Decoder | Analog Devices
ADV7183BKSTZ

ADV7183BKSTZ - 10-Bit Multiformat Video Decoder | Analog Devices

The Analog Devices ADV7183BKSTZ is a 10-bit NTSC, PAL, and SECAM video decoder IC with three integrated 54 MHz ADCs, 4:2:2 component video output, and an 80-lead LQFP package measuring 14 mm by 14 mm. It accepts standard analog baseband television signals and converts them into digital component-video data compatible with the CCIR601 and CCIR656 interface formats. An analog video decoder is an interface IC that bridges legacy composite or component television signals and digital video processing systems. Its signal path includes analog-to-digital conversion, automatic format and standard detection, color demodulation, timing recovery, and digital pixel output. The ADV7183BKSTZ belongs to the video-decoder hierarchy within interface converters, mixed-signal semiconductors, and broader video-processing systems. The principal features include automatic detection of NTSC, PAL, and SECAM standards, three 10-bit ADCs clocked from a single 27 MHz crystal, 4:2:2 component-video generation, and a flexible digital output interface. The B revision represented by this device improves performance for noisy or weak input signals and VCR locking while retaining the multiformat decoding architecture. Operation from a single 27 MHz crystal supports a compact analog front end without multiple independent sampling clocks. Internally, the decoder separates synchronization, luminance, and chroma processing before presenting digital component data. Automatic standard detection reduces configuration effort because the same decoder can accommodate multiple regional television systems. The three parallel converters sample the analog input channels consistently, while the clocking architecture supports a unified conversion and timing domain. Its digital interface can feed downstream frame buffers, image processors, scalers, recorders, or display controllers. Typical uses include analog surveillance-camera systems, video recorders, projectors, broadcast equipment, consumer television sets, and industrial vision equipment. It is particularly useful where an installation must accept NTSC, PAL, or SECAM composite input without requiring separate decoder hardware for each standard. The decoded output can be processed by a host FPGA, ASIC, image-processing pipeline, or dedicated video controller. Design the analog input path carefully because composite video performance depends on source impedance, termination, filtering, ground continuity, and connector layout. Keep the crystal and associated decoupling close to the device, follow the pin-description table for supply and ground assignment, and route high-speed digital outputs with controlled impedance. Verify timing, color, and synchronization behavior across every required television standard. This page combines the verified product identity, multiformat decoding capabilities, interface role, and application guidance with practical design notes. It also distinguishes the documented ADV7183B feature set from the earlier ADV7183 description and identifies the package and sourcing details needed for engineering review.

RFQ پەیوەندی
ADV7184BSTZ - 10-Bit SDTV Video Decoder | Analog Devices
ADV7184BSTZ

ADV7184BSTZ - 10-Bit SDTV Video Decoder | Analog Devices

The Analog Devices ADV7184BSTZ is a 10-bit multiformat SDTV video decoder that automatically detects and converts NTSC, PAL, and SECAM analog baseband signals into 4:2:2 component video data. It supports 16-bit or 8-bit CCIR 601 and CCIR 656 output formats and is packaged in an 80-lead LQFP measuring 14 x 14 mm. An analog video decoder is an interface IC that converts legacy composite, component, or RGB television signals into a digital representation for processing, recording, transmission, or display. Within the signal-conversion hierarchy, the ADV7184BSTZ functions as a video decoder IC, bridges analog video sources to digital video processors, and supports applications involving projectors, recorders, security systems, and professional video equipment. Key features include automatic detection of worldwide NTSC, PAL, and SECAM standards, simultaneous processing of CVBS and standard-definition RGB signals, and flexible digital output. Its 4:2:2 component data can be emitted as 16-bit or 8-bit CCIR 601/656, while synchronization information includes horizontal sync, vertical sync, and field timing. A 2-wire serial bidirectional port compatible with I2C provides register control and configuration. The device is fabricated using a 3.3 V CMOS process, integrating four analog-to-digital converters with digital decoding and output circuitry. The ADV7184 supports line-locked and clock-based systems, giving system designers flexibility in synchronizing decoded video to an external timing reference. Fast blank signal mixing allows overlay-related signal handling where the board and system requirements support that function. Typical applications include analog video capture for security cameras, projector input interfaces, broadcast and professional video monitoring, video recorders, and legacy audiovisual equipment requiring automatic standards detection. The decoder is especially useful when a system must accept several regional television standards while presenting the decoded signal through a standardized digital bus or parallel CCIR interface. PCB implementation requires careful treatment of analog and digital signals, solid grounding, controlled clock routing, and suitable decoupling. Follow the pin-description table and recommended application circuit in the manufacturer datasheet when assigning tracks, placing input components, and configuring the digital output interface. Confirm pin-level signal levels, timing, and interface voltage compatibility before production release. This product page consolidates the manufacturer's decoder capabilities with package, interface, lifecycle, sourcing, application, and replacement guidance. It also distinguishes true pin-compatible exchanges from related video decoders that require different packages, different features, or board-level redesign.

RFQ پەیوەندی
ADV7186BBCZ-T-RL - Video Decoder | Analog Devices | 196-CSPBGA
ADV7186BBCZ-T-RL

ADV7186BBCZ-T-RL - Video Decoder | Analog Devices | 196-CSPBGA

Analog Devices ADV7186BBCZ-T-RL is a single-chip multiformat video decoder and display processor designed for NTSC, PAL, and SECAM analog video systems. The device uses one 10-bit ADC in its analog front end, includes a flexible 24-bit pixel output interface, and provides an independent BT.656 output channel. Its control interface is analog-voltage based, and it is supplied in a 196-CSPBGA package measuring 12 x 12 mm. The -T variant provides an LCD timing controller, or TCON, output for display-panel timing and PWM backlight-control functions. A video decoder is an interface IC that converts composite or component analog video into digital pixel and timing data for processing, display, capture, or transmission. The ADV7186 belongs to the video-processing hierarchy, combining analog front-end conversion, video decoding, digital pixel output, and LCD timing control in one package. This integration can reduce the number of separate interface devices required in industrial imaging, broadcast equipment, surveillance systems, and embedded display designs. The ADV7186BBCZ-T-RL supports analog-video decoding for NTSC, PAL, and SECAM standards. Its analog front end uses a single high-speed, 10-bit ADC, while the output section provides a flexible 24-bit digital pixel interface and a separate BT.656 channel. The LCD timing controller supports timing requirements for LCD panels, and the integrated PWM backlight-control function is intended for compatible panel backlight systems. These functions distinguish the -T device from the base ADV7186BBCZ configuration. The target device does not include the LVDS receiver found on ADV7186BBCZ and ADV7186BBCZ-T, nor does it provide the LVDS transmitter found on ADV7186BBCZ. Instead, the -T version uses its TCON output in place of the LVDS transmitter output. The ADV7186BBCZ-TL variant is a reduced-function version that does not support external SDRAM, so it is not a function-for-function substitute for a design that depends on external memory. Typical applications include analog video capture for industrial vision systems, CCTV and surveillance display chains, broadcast and professional video equipment, automotive or embedded displays using analog sources, and LCD-panel interfaces requiring integrated timing and backlight control. Designers should confirm signal amplitudes, supported input resolutions, external-memory requirements, and panel timing before assigning the device to a specific product architecture. When laying out a 196-CSPBGA design, follow the manufacturer land pattern, ball assignments, and high-speed routing guidance. The analog input and digital output interfaces have different layout sensitivities, so keep analog traces short, provide a continuous ground reference, and control return paths beneath high-speed digital signals. Confirm the complete power, clock, and interface requirements against the ADV7186 datasheet before schematic release. This product summary consolidates the exact device identity, package information, supported video standards, interface features, family distinctions, and practical design considerations. It also identifies the closest same-family options and clarifies which variants alter LVDS, SDRAM, or external-memory behavior, helping engineers narrow PCB-compatible sourcing options without overlooking functional differences.

RFQ پەیوەندی
ADV7186WBBCZ-RL 10-Bit Video Decoder | Analog Devices
ADV7186WBBCZ-RL

ADV7186WBBCZ-RL 10-Bit Video Decoder | Analog Devices

Analog Devices ADV7186WBBCZ-RL is a single-chip, multiformat video decoder and display processor with a 10-bit analog-to-digital converter, integrated LVDS transmitter, and integrated LVDS receiver in a 196-CSPBGA package measuring 12 mm by 12 mm. The decoder accepts analog NTSC, PAL, and SECAM composite video, while its analog front end supports resolutions up to 800 × 600 pixels at 60 Hz. A video decoder is an interface IC that converts analog composite video into a digital video stream for subsequent processing, display, capture, or transmission. It belongs to the video-interface and display-processing hierarchy rather than the general-purpose signal-processing category. The ADV7186 combines analog video digitization, decoding, timing generation, and LVDS interface functions to reduce the component count required in automotive display and surveillance systems. The principal device features include a single 10-bit ADC, support for NTSC, PAL, and SECAM formats, an integrated LVDS transmitter, and an integrated LVDS receiver. The 196-CSPBGA package provides a high pin count for parallel and serialized video interfaces, supply connections, controls, and clock signals. Analog Devices identifies the ADV7186 family as not recommended for new designs, so engineers should evaluate current device options before starting new production programs. The ADV7186 analog front end digitizes composite video with one high-speed ADC and produces digital video data for downstream display or processing functions. Its integrated LVDS transmitter supports digital video transport over low-voltage differential signaling, while the LVDS receiver accepts a differential digital source. This combination is useful when a system must bridge legacy analog video inputs with modern digital display or processing architectures without implementing separate external interface devices. Typical uses include automotive passenger-information displays, rear-seat entertainment systems, navigation displays, industrial video panels, security cameras, and video observation equipment. In these systems, the decoder can accept composite video from cameras or legacy sources and provide digital video to a display controller, processor, or LVDS-connected panel. Design planning should begin with the manufacturer pin-description and reference-design material because the 196-CSPBGA layout requires careful high-speed routing, controlled impedance, solid grounding, and complete decoupling. Confirm the exact supported output format, clocking method, synchronization behavior, supply sequencing, and board-level timing budget before releasing a PCB. This page combines the exact product identity, lifecycle notice, supported video standards, interface functions, package information, application guidance, and verified same-package family references into a focused engineering resource for legacy video-decoder designs.

RFQ پەیوەندی
ADV7188BSTZ - 12-Bit 4-Channel Video Decoder | Analog Devices
ADV7188BSTZ

ADV7188BSTZ - 12-Bit 4-Channel Video Decoder | Analog Devices

Analog Devices ADV7188BSTZ is a multiformat SDTV video decoder IC with four internal ADCs, 12-bit video processing, and an 80-pin LQFP package measuring 14 mm by 14 mm. The device automatically detects and converts worldwide NTSC, PAL, and SECAM analog baseband television signals into 4:2:2 component-video data. Its digital output supports 20-bit, 16-bit, 10-bit, and 8-bit CCIR 601/CCIR 656 formats, providing a flexible interface for set-top boxes, video players, recorders, and related video equipment. A video decoder is an interface IC that converts composite or component analog video into digital pixel data for processing by a scaler, processor, display controller, or storage system. Within the signal-chain hierarchy, the ADV7188BSTZ sits between the analog tuner or video front end and the digital video pipeline. Its multiformat detection capability allows one decoder design to accommodate the major analog television standards used across broadcast, surveillance, industrial, and legacy consumer systems. The ADV7188BSTZ combines four ADC channels with a 12-bit decoding path. The manufacturer describes automatic NTSC, PAL, and SECAM detection, 4:2:2 component-video generation, and output word lengths of 20, 16, 10, or 8 bits. Fast Switch Overlay support adds an important system-level capability for applications that need to switch among video sources while maintaining stable decoding and output synchronization. The 80-LQFP package provides a conventional surface-mount footprint for complex mixed-signal video ICs. The interface uses CCIR 601 and CCIR 656 conventions to transfer decoded component-video data. CCIR 601 describes parallel digital-video formatting, while CCIR 656 commonly describes embedded-sync serial output. Selecting the appropriate operating mode is therefore central to matching the decoder to the downstream processor, serializer, or display pipeline. Configuration details, supported analog input arrangements, timing behavior, and electrical limits should be taken directly from the Analog Devices ADV7188 datasheet. Typical uses include analog set-top box front ends, video-player and recorder signal chains, surveillance equipment, industrial inspection systems, and broadcast-related test equipment. In each case, the decoder converts a selected analog composite video input into standardized digital component data. Designers should verify channel count, analog input routing, synchronization requirements, output format, clocking, supply rails, and PCB land-pattern requirements against the manufacturer datasheet before releasing a production layout. Layout is the primary implementation consideration because the device combines high-speed digital outputs with sensitive analog video inputs. Keep analog routing short and symmetrical, use a continuous ground reference plane, place decoupling capacitors close to the relevant supply pins, and maintain controlled return paths for clock and data signals. Review the recommended schematic, external component values, pin multiplexing, and unused-pin requirements in the manufacturer datasheet before component placement. This product record combines the verified device identity, package information, supported video standards, and output formats with practical selection, comparison, layout, and sourcing guidance. It is intended to help engineers identify whether the ADV7188BSTZ matches a multichannel, multistandard analog-video decoding requirement before beginning detailed schematic and PCB implementation.

RFQ پەیوەندی
ADV7189BBSTZ - 12-Bit Video Decoder | Analog Devices
ADV7189BBSTZ

ADV7189BBSTZ - 12-Bit Video Decoder | Analog Devices

The Analog Devices ADV7189BBSTZ is a high-performance 12-bit analog video decoder with noise-shaped video ADCs, supplied in an 80-lead LQFP package measuring 14 mm by 14 mm. It is designed to detect and convert standard analog baseband television signals into digital component-video data, making it suitable for set-top boxes, video players, recorders, and related television-processing equipment. The device supports a 3.15 V to 3.45 V analog operating-supply range and a 1.65 V to 2 V digital operating-supply range. A video decoder is an interface IC that converts analog luminance, chrominance, and synchronization information into digital pixels that a host processor, scaler, display controller, or video processor can use. The ADV7189BBSTZ belongs to the video-decoder category within interface ICs and combines analog front-end conversion with digital video-output processing. Its 12-bit conversion architecture is intended to preserve additional signal detail compared with lower-resolution decoder implementations while supporting widely deployed television standards. The key technical feature of the ADV7189BBSTZ is its use of noise-shaped video ADCs. Noise shaping redistributes quantization noise away from the most useful portion of the video bandwidth, allowing the decoder to achieve high effective resolution without requiring every output bit to provide equivalent visual improvement. The component supports programmable analog and digital interfaces and is intended for embedded video systems where analog composite or baseband video must be converted into a standardized digital data stream. Typical deployments include analog television input stages in set-top boxes, video-player and recorder products, television capture equipment, and industrial video panels. In these systems, the decoder can accept an analog television signal and present a digital component-video output to downstream processing logic. System partitioning should account for the separate analog and digital supply domains because the correct sequencing and voltage levels of both rails directly affect signal integrity and decoder operation. The 80-lead LQFP package exposes the analog inputs, digital video interface, power domains, control signals, reference connections, and support pins needed for a complete decoder implementation. Because this package has many dedicated connections, PCB layout should preserve controlled return paths around the analog front end while keeping digital clock and data routing away from sensitive input nodes. Designers should follow the manufacturer's pin-description table and reference circuit when assigning tracks and selecting bypass capacitance. This product page combines the manufacturer's product information, distributor package and supply details, documented decoder capabilities, and practical interface-design considerations. It also distinguishes the ADV7189B family's lifecycle position from the requirements of new designs, helping engineers assess whether the device remains appropriate for an existing platform or whether a redesign is preferable.

RFQ پەیوەندی
ADV7189BKSTZ - 12-Bit Video Decoder | Analog Devices
ADV7189BKSTZ

ADV7189BKSTZ - 12-Bit Video Decoder | Analog Devices

Analog Devices ADV7189BKSTZ is a high-performance 12-bit video decoder with three noise-shaped video ADCs, automatic analog-video format detection, and digital component-video output. It is packaged in an 80-pin LQFP measuring 14 x 14 mm and is intended for set-top boxes, video players, recorders, and other systems that accept composite or component analog video. A video decoder is an interface IC that converts analog baseband television signals into digital component-video data for subsequent processing, display, encoding, or recording. The ADV7189 family supports worldwide NTSC, PAL, and SECAM input formats. In the product hierarchy, the ADV7189BKSTZ belongs to the video decoder and analog-to-digital conversion categories within interface ICs and broader semiconductor signal-processing devices. The decoder uses three 12-bit ADCs with noise shaping to recover digitized video information. According to the Analog Devices product page, the device automatically detects and converts standard analog baseband television signals into 4:2:2 component-video data compatible with 20-, 16-, 10-, and 8-bit CCIR601/CCIR656 interfaces. This combination allows legacy analog-video sources to be connected to digital video processing pipelines without using separate converters for each color channel. Its integration reduces the number of discrete components required around the video input. The three internal ADCs, multi-standard format detection, and digital component-video output are particularly useful in consumer set-top boxes, video recorders, television equipment, industrial monitoring systems, and professional video conversion products. The 80-LQFP package also exposes the device's extensive analog, digital, power, and control connections rather than relying on an extremely small package that would complicate high-speed layout. Engineers should pay particular attention to analog signal integrity when planning the board. Composite inputs, component inputs, synchronization signals, reference voltages, and digital video outputs each require appropriate return paths and controlled impedance. Place the analog input network and supporting components close to the decoder, keep digital output routing away from sensitive analog nodes, and follow the decoupling and grounding arrangement shown in the manufacturer datasheet. This page combines the manufacturer product identity, distributor package information, lifecycle status, interface use cases, drop-in candidates, and PCB-design considerations in a form intended to accelerate component selection. It also distinguishes exact ordering-code variations from broadly related decoder families, helping designers verify package, pinout, signal format, and lifecycle requirements before committing a new design to production.

RFQ پەیوەندی
ADV7191KST - 6-Channel 10-Bit Video Encoder | Analog Devices
ADV7191KST

ADV7191KST - 6-Channel 10-Bit Video Encoder | Analog Devices

Analog Devices ADV7191KST is an integrated digital video encoder with six 10-bit DAC outputs and 54 MHz oversampling, packaged for professional analog-video signal conversion. It accepts digital CCIR-601 4:2:2 component video data in 8-bit or 16-bit format and produces standard analog baseband television signals compatible with NTSC, PAL B/D/G/H/I, PAL M, PAL N, and PAL-60 systems. The device combines a digital video encoding core with programmable luminance and chrominance filters plus multiple analog output channels. A video encoder is a signal-conversion integrated circuit that transforms digital component-video data into analog composite, component, or related baseband outputs. Within the broader semiconductor hierarchy, the ADV7191KST belongs to the video encoder and interface IC family, where it bridges digital video processing systems and legacy analog broadcast equipment. Its integrated DACs reduce the number of separate converters required in professional video signal paths. The principal features include six 10-bit DAC outputs, 54 MHz oversampling, support for 8-bit and 16-bit CCIR-601 4:2:2 input, and programmable luminance and chrominance filtering. The manufacturer describes the ADV7190 and ADV7191 as functionally equivalent, with the ADV7190 additionally incorporating the Macrovision Revision 7 anti-copy algorithm. The ADV7191 therefore favors systems that need the encoder architecture without that specific Macrovision feature. The converter is designed for digital-video equipment that must generate multiple analog television outputs while preserving programmable filtering control. Its 10-bit DAC resolution provides 1024 theoretical quantization levels per output, while 54 MHz oversampling supports filtered analog reconstruction. Because the six outputs are integrated, board designers can reduce external DAC count while retaining separate baseband signal paths where the application requires them. Typical uses include broadcast and studio video conversion, professional monitoring, video test and measurement equipment, industrial imaging, video-distribution racks, and legacy analog-video interfaces connected to digital processing. System-level qualification should include checking supported video timing, output bandwidth, synchronization behavior, and external analog-filter requirements against the manufacturer datasheet before releasing a production design. The most important design consideration is preserving the intended analog signal path. DAC output filtering, ground-plane continuity, power-supply decoupling, and clock or synchronization layout can materially affect output quality. Designers should follow the manufacturer’s recommended application circuit and verify their external component values rather than inferring values from this overview. This page consolidates the verified manufacturer description, source links, packaging constraints, drop-in alternatives, application guidance, and engineering trade-offs for engineers evaluating the ADV7191KST. It adds design-oriented context beyond a distributor listing while clearly separating verified facts from data requiring confirmation from the full datasheet.

RFQ پەیوەندی
ADV7194KST - 54 MHz Extended Video Encoder | Analog Devices
ADV7194KST

ADV7194KST - 54 MHz Extended Video Encoder | Analog Devices

Analog Devices ADV7194KST is an integrated professional extended-10 video encoder with 54 MHz oversampling, packaged in an 80-lead LQFP. It converts digital CCIR-601 4:2:2 component-video data at 8-, 10-, 16-, or 20-bit resolution into standard analog baseband television signals compatible with NTSC, PAL B/D/G/H/I, PAL N, and PAL-60. The encoder supports 8-, 10-, 16-, and 20-bit digital input widths and operates as a surface-mount video encoder IC. A video encoder is a signal-conversion semiconductor that transforms digital component-video data into a standardized analog television output. Within the broader signal-chain hierarchy, the ADV7194 belongs to video encoding and decoding ICs, multimedia processors, interface ICs, and ultimately semiconductors. Its digital inputs accept formatted CCIR-601 component-video streams, while its analog outputs recreate luminance and chrominance signals suitable for conventional broadcast, video-production, DVD, PC-video, and multimedia equipment. Key features include 54 MHz oversampling, support for eight input word lengths, and compatibility with multiple analog television systems. The available data identifies the device as a professional extended-10-bit encoder and confirms 80 terminals in an LQFP package. Its commercial temperature grade and square gull-wing package suit established professional video equipment designs. Exact clock frequency, analog output resolution, supply voltage, current consumption, and operating-temperature limits are not stated in the supplied source excerpts and should be confirmed against the manufacturer datasheet. Technically, the ADV7194 combines digital input processing with analog video synthesis. Its 54 MHz oversampling architecture provides additional sampling capability relative to the incoming CCIR-601 video data, while the supported 8-, 10-, 16-, and 20-bit formats permit integration with digital video sources having different word widths. The broad NTSC and PAL compatibility enables one encoder design to address several regional analog video standards without changing the digital source architecture. Typical uses include DVD and PC-video subsystems, professional broadcast equipment, video capture cards, multimedia appliances, digital-to-analog video conversion, and legacy analog-video test systems. It is most appropriate when a design already supplies CCIR-601 4:2:2 data and specifically requires composite or component-style analog television outputs. It is not a general-purpose image scaler, HDMI transmitter, or modern streaming-media codec. Designers should verify the exact pin assignments, synchronization requirements, supply rails, clocking scheme, DAC settling behavior, and output filtering recommendations from the complete manufacturer datasheet before layout release. The 80-pin LQFP also requires careful fanout and a stable ground-plane strategy. Digital video inputs should be routed away from sensitive analog outputs, with separate return paths and appropriately terminated clock and synchronization signals. This page combines verified manufacturer and distributor information with application guidance, comparison criteria, sourcing details, and practical design considerations. It is intended to help engineers evaluate the ADV7194KST quickly while preserving the distinction between confirmed source data and specifications requiring datasheet verification.

RFQ پەیوەندی
ADV7194KSTZ - 10-Bit Video Encoder | Analog Devices
ADV7194KSTZ

ADV7194KSTZ - 10-Bit Video Encoder | Analog Devices

Analog Devices ADV7194KSTZ is an integrated digital video encoder that converts CCIR-601 4:2:2 component video data into standard analog baseband television signals. The device accepts 8-, 10-, 16-, or 20-bit digital input, provides six 10-bit DAC channels, and uses 54 MHz oversampling. It is packaged in an 80-lead LQFP measuring 14 mm by 14 mm. A digital video encoder is an interface IC within the broader semiconductor hierarchy of video encoder, video interface, interface IC, and signal-processing semiconductor. Its role is to translate digital component-video data into the analog composite-video formats expected by conventional television equipment, set-top boxes, video processors, and other multimedia systems. The ADV7194KSTZ supports standard NTSC output as well as PAL B, D, G, H, I, N, and PAL-60 formats. According to the Analog Devices ADV7194 product page, its integrated architecture accepts CCIR-601 4:2:2 component data and produces a standard analog baseband television signal. This combination of multi-format compatibility and integrated six-channel 10-bit DAC output reduces the external signal-chain complexity of a digital-video-to-analog-video design. Professional extended-10 encoding with 54 MHz oversampling is the core performance feature identified for this device. Extended-10 operation provides additional processing headroom beyond a conventional eight-bit encoding path, while the six DAC channels correspond to the analog outputs required for composite video generation. The manufacturer describes the component as a video encoder IC for DVD, personal-computer video, and multimedia equipment. Typical applications include professional broadcast video conversion, DVD player output stages, personal-computer video equipment, set-top box video paths, video test and measurement systems, and legacy analog displays that accept composite baseband video. In these systems, the encoder can sit between a digital video processor and an analog television or video-processing input while handling format conversion within a single integrated package. The principal design consideration is interface verification. The CCIR-601 input width, synchronization requirements, pixel clock, supported output standard, DAC output topology, and power rails must be checked against the surrounding video pipeline before layout begins. The 80-lead LQFP also requires careful high-speed signal routing, solid ground-plane continuity, and decoupling close to the supply pins. This page consolidates the manufacturer product information, exact package details, cross-reference candidates, interface requirements, and practical PCB considerations for engineers evaluating ADV7194KSTZ implementations. It emphasizes what must be confirmed in the datasheet rather than treating unrelated encoder functions as automatically interchangeable.

RFQ پەیوەندی
ADV7195KSZ - Triple 11-Bit HD Video Encoder | Analog Devices
ADV7195KSZ

ADV7195KSZ - Triple 11-Bit HD Video Encoder | Analog Devices

Analog Devices ADV7195KSZ is a triple high-speed digital-to-analog video encoder with three 11-bit DAC channels in a 52-pin MQFP package. It operates from a 3.3 V analog and digital supply and converts YCrCb High Definition video into analog component HD video compatible with EIA770.1, EIA770.2, and EIA770.3. The device can also accept RGB data in 4:4:4 format and generate RGB outputs compatible with RS170 and RS343A. A video encoder is an interface IC that converts digitally represented video signals into analog component or RGB video suitable for conventional broadcast, studio, and professional video equipment. Within the broader signal-chain hierarchy, this device belongs to the video interface and encoder category, where digital pixel data is translated into legacy analog transmission formats. The ADV7195KSZ provides three synchronized 11-bit DACs, supporting Y, Cr, and Cb signal generation from digital YCrCb input. Its 3.3 V operating supply includes a specified 3.15 V to 3.45 V analog-supply range, while the factory characteristics in the manufacturer datasheet are stated over 0°C to 70°C with a maximum junction temperature of 110°C. The documented reference voltage is 1.235 V, with a typical 2470 ohm RSET resistor and 300 ohm output loading condition. The encoder supports EIA770.1, EIA770.2, and EIA770.3 component-video outputs as well as 4:4:4 RGB input. RS170 and RS343A-compatible RGB outputs broaden compatibility with professional and broadcast equipment. The manufacturer describes the device as a triple high-speed encoder for High Definition video, making digital source equipment, post-production systems, and legacy analog video bridges natural implementation areas. Designers should pay close attention to DAC output loading, reference and RSET component accuracy, digital-interface timing, and analog-output routing. The 52-pin surface-mount package also requires adequate PCB land-pattern fidelity and grounding because simultaneous high-speed digital processing and three analog output channels can introduce coupling if layout guidance is not followed. This page combines verified manufacturer information, distributor availability, pinout availability, application guidance, and strict drop-in replacement analysis to provide practical information beyond the basic datasheet specifications. Pricing reflects the verified distributor listing as of 2026-10-28, while lifecycle, pinout, and compliance details that were not explicitly verified remain clearly identified rather than inferred.

RFQ پەیوەندی
ADV7197KS - Triple 11-Bit HDTV Video DAC | Analog Devices
ADV7197KS

ADV7197KS - Triple 11-Bit HDTV Video DAC | Analog Devices

The Analog Devices ADV7197KS is a triple 11-bit high-speed digital-to-analog converter and HDTV video encoder packaged in a 52-pin PQFP. It accepts 10-bit YCrCb or RGB data, including 4:4:4 and 4:2:2 formats, and generates three analog component-video outputs compatible with EIA770.3. Its three DAC channels support output currents of 4.33 mA and 2.66 mA, while a serial bidirectional I2C control interface supports programmable operating modes. A video DAC is a semiconductor that converts digital pixel or component-video data into analog voltage or current signals for display, broadcast, projection, and video-processing equipment. The ADV7197 belongs to the broader digital-to-analog converter hierarchy, which includes video DACs, audio DACs, interface ICs, and signal-conversion semiconductors. In an HDTV signal chain, it bridges a digital video processor and an analog video output stage. Key features include three 11-bit DAC channels, support for 10-bit 4:4:4 YCrCb or RGB inputs, 10-bit 4:2:2 YCrCb input, programmable output modes, and operation from a +5 V or +3.3 V supply. The converter accepts HDTV data at 74.25 MHz or 74.1758 MHz, and its asynchronous timing mode accommodates other high-definition standards based on SMPTE274M or SMPTE296M. Technically, the ADV7197 integrates three separate high-speed video D/A converters with TTL-compatible inputs. Serial control over the bidirectional I2C port configures modes, while separate analog outputs support standard component-video generation. The architecture is intended for multimedia systems where multiple synchronized analog channels are required from one digital source. Typical applications include HDTV displays, projection systems, digital video equipment, high-resolution color graphics, image-processing systems, and instrumentation. In each case, the device serves as the final digital-to-analog conversion stage after video compression, scaling, or color processing. A key design consideration is signal integrity. The high-speed digital inputs, analog current outputs, clocking, and control bus require careful PCB partitioning and return-path planning. Designers should also preserve the device's specified supply range, input timing, output-current configuration, and external video-network implementation rather than assuming generic DAC pinout conventions. This page combines manufacturer specifications, observed distributor pricing, verified lifecycle information, and engineering selection guidance. It also distinguishes exact package/order variants from broader functional alternatives so obsolete designs can be migrated without conflating compatibility with mere feature similarity.

RFQ پەیوەندی
ADV7280AWBCPZ-M 10-Bit SDTV Video Decoder | Analog Devices
ADV7280AWBCPZ-M

ADV7280AWBCPZ-M 10-Bit SDTV Video Decoder | Analog Devices

The Analog Devices ADV7280AWBCPZ-M is a 10-bit, multiformat SDTV video decoder with a 4x oversampling architecture and integrated deinterlacer, packaged in a 32-lead LFCSP measuring 5 mm x 5 mm. It accepts standard analog baseband video and converts the selected composite or component signal into a YCrCb 4:2:2 video data stream. The device is programmed through a 2-wire serial interface that is I2C compatible and is fabricated using a 1.8 V CMOS process. A video decoder is an interface IC that translates legacy analog video signals into a digital pixel format that can be processed by an FPGA, ASIC, display controller, or image pipeline. In the wider electronics hierarchy, the ADV7280AWBCPZ-M belongs to the video interface IC family and ultimately sits within interface and signal-processing semiconductors. This conversion stage is useful when an existing analog video source must coexist with a modern digital display or embedded imaging system. The decoder provides 10-bit processing, 4x oversampled SDTV video decoding, and deinterlacing in one compact package. Its multiformat input capability allows the system to identify supported analog video sources automatically, while YCrCb 4:2:2 output supports digital video pipelines without requiring an RGB conversion at the analog input stage. The I2C-compatible control path simplifies configuration from a host processor or programmable logic device. The 32-LFCSP 5 x 5 mm package also supports compact, surface-mount board layouts, although its exposed thermal pad requires careful PCB layout and thermal management. The ADV7280-M family is intended for embedded analog-video processing in industrial, consumer, surveillance, and broadcast-related equipment. Typical signal-chain roles include decoding composite video, generating YCrCb pixel data for an FPGA scaler, and feeding a display pipeline. Because decoding and deinterlacing are combined, the device reduces the number of separate processing blocks required for interlaced standard-definition sources. Designers should still account for analog input conditioning, clocking, output timing, unused-pin treatment, and the package thermal pad when creating a production layout. A key design consideration is that the analog video input and digital output paths must be laid out as controlled-impedance and noise-sensitive structures. Keep analog traces short, provide the required bypass capacitance at the supply pins, connect the exposed pad to the recommended ground-plane thermal via pattern, and follow the manufacturer pin-description table for every signal and unused input. Use the manufacturer datasheet for the authoritative pinout, register definitions, timing diagrams, electrical limits, and application circuit because the complete pin list is not included on this page. This product page consolidates the manufacturer description, package information, programming method, lifecycle context, drop-in alternatives, application guidance, and engineering design notes into a single decision resource. It is intended to support component identification, PCB planning, firmware preparation, and replacement assessment rather than replace the full manufacturer datasheet.

RFQ پەیوەندی
ADV7280BCPZ - 10-Bit Video Decoder | Analog Devices
ADV7280BCPZ

ADV7280BCPZ - 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7280BCPZ is a 10-bit, four-times-oversampled analog video decoder with integrated deinterlacing, automatic NTSC, PAL, and SECAM detection, and ITU-R BT.656 digital video output. The device accepts composite and S-Video baseband video and is housed in a 32-lead LFCSP package measuring 5 mm by 5 mm. Its 10-bit processing, four-times oversampling, analog-to-digital conversion, and deinterlacing functions combine in one video interface IC. A video decoder converts analog baseband imagery into a digital stream that a processor, image pipeline, display controller, or video recorder can consume. Within the semiconductor hierarchy, the ADV7280BCPZ is a video decoder and video interface IC rather than a general-purpose processor. It supports worldwide analog video standards, including composite and S-Video sources, while producing digital data that conforms to the ITU-R BT.656 specification. Key capabilities include automatic multiformat detection, 10-bit digitization, four-times oversampling, and integrated deinterlacing. The digital interface includes pixel data, a line-locked clock, horizontal synchronization, and vertical synchronization or field indication. These functions support conversion of legacy analog video into a parallel digital format suitable for industrial imaging, broadcast equipment, security systems, video capture, and professional A/V installations. The ADV7280 family is designed for multiformat analog baseband decoding. Its oversampled conversion architecture helps reconstruct a stable digital representation before the deinterlacer generates progressive-frame output. The manufacturer documentation identifies ITU-R BT.656 as the output format and describes separate synchronization outputs for integrating the decoder with downstream digital video logic. Typical uses include CCTV camera capture, surveillance recording, industrial inspection, broadcast monitoring, video test equipment, and embedded analog-video conversion. System designers should budget for analog input filtering, stable clocking, correct synchronization routing, suitable output impedance, and power-supply decoupling. Review the pin-description and reference-circuit tables in the manufacturer datasheet before assigning tracks or laying out the analog input section. This page combines manufacturer device information, verified lifecycle guidance, packaging details, drop-in replacement analysis, application guidance, and design considerations to support faster component evaluation and board-level implementation.

RFQ پەیوەندی
ADV7280BCPZ-M 10-Bit SDTV Video Decoder | Analog Devices
ADV7280BCPZ-M

ADV7280BCPZ-M 10-Bit SDTV Video Decoder | Analog Devices

The Analog Devices ADV7280BCPZ-M is a 10-bit, four-times-oversampled SDTV video decoder with integrated deinterlacing, eight analog video inputs, and an I2C-compatible control interface. It is manufactured on a 1.8 V CMOS process and is available in a 32-lead LFCSP package measuring 5 mm by 5 mm. The ADV7280-M converts composite analog video signals into digital video data suitable for mobile-industry processor interface, or MIPI CSI-2, output. A video decoder is an interface IC that converts legacy analog composite video into a standardized digital representation for processing by a host processor, display controller, or embedded multimedia system. The ADV7280 family supports automatic conversion of NTSC, PAL, and SECAM composite baseband signals. In the ADV7280-M version, eight analog inputs expand channel flexibility compared with the four-input ADV7280, making the device useful for compact systems that monitor multiple camera or composite-video sources. The decoder provides 10-bit video processing and four-times oversampling, while its deinterlacer converts interlaced source material into progressive output suitable for digital display pipelines. Its I2C-compatible, two-wire bidirectional programming interface allows a host processor to configure operating modes and read status information. The 1.8 V CMOS implementation supports integration into space-constrained portable equipment, and the 5 mm square LFCSP package reduces board area compared with larger leaded decoder packages. The ADV7280-M is intended for analog video capture, image-processing modules, industrial monitoring, portable imaging equipment, consumer video interfaces, and embedded systems that need multiple composite-video inputs. Its digital output architecture allows decoded video to be transferred over a serial camera interface rather than through a parallel data bus, reducing board-routing pressure and supporting modern embedded processors. System designers should still budget careful treatment for analog signal integrity, synchronization, and power-supply noise. When laying out the board, place analog inputs and their protection or termination networks close to the LFCSP pins, keep high-speed MIPI traces short and properly referenced, and provide stable supply and ground planes. Verify exposed-pad soldering, analog and digital return paths, and thermal performance during assembly. Use the manufacturer datasheet and hardware reference manual to confirm register behavior, supported video standards, pin connections, and power sequencing. This page combines the manufacturer product information, interface characteristics, package details, engineering design guidance, and documented comparison options. It is intended to help engineers identify the correct decoder variant, plan a compatible replacement, and design a robust analog-to-digital video path.

RFQ پەیوەندی
ADV7280KCPZ-M 8-Input 10-Bit Video Decoder | Analog Devices
ADV7280KCPZ-M

ADV7280KCPZ-M 8-Input 10-Bit Video Decoder | Analog Devices

Analog Devices ADV7280KCPZ-M is a multiformat analog video decoder with eight analog inputs, 10-bit conversion, a 2-wire I2C-compatible control interface, and a 32-LFCSP 5 x 5 mm package. It automatically detects NTSC, PAL, and SECAM composite, S-Video, and component video signals, and the -M version produces an 8-bit YCrCb 4:2:2 stream over a MIPI CSI-2 interface. An analog video decoder is an interface IC that converts legacy baseband video into a digital representation for processing, display, recording, or transmission. It sits between analog composite or component inputs and a digital video pipeline, helping replace costly external analog-to-digital converters, decoders, and deinterlacing circuitry. The ADV7280KCPZ-M therefore belongs to the video decoder, data converter, interface IC, and semiconductor hierarchy. The eight-input configuration allows one decoder to manage multiple video sources without requiring a separate decoder for every channel. Automatic format detection reduces configuration effort across worldwide NTSC, PAL, and SECAM standards. Its 10-bit interface and 4:2:2 YCrCb output preserve chroma and luminance information in a compact digital format, while the I2C-compatible serial port supports register-based control from a host processor. The ADV7280-M architecture is fabricated in a 1.8 V CMOS process and supports conversion of eight single-ended analog video inputs into a digital video data stream. Its MIPI CSI-2 output is designed for direct connection to compatible embedded vision processors, camera modules, or media controllers. The 32-LFCSP package reduces board area, making the device suitable for compact portable and embedded equipment. Typical uses include automotive infotainment, industrial inspection, professional video conversion, surveillance systems, and legacy analog camera modernization. The -M variant is especially appropriate when a design needs more than four video inputs or requires a MIPI CSI-2 digital output. Designers should also account for the shared serial bus, video input routing, decoupling requirements, exposed-pad thermal management, and format-specific configuration in the manufacturer datasheet. The principal design trade-off is integration versus configuration complexity. Combining eight inputs, oversampled decoding, deinterlacing, color-space conversion, and MIPI output simplifies the external signal chain, but firmware must configure each input and validate timing for the intended video standard. Use the manufacturer pin-description table and reference application guidance when assigning tracks and grounding the exposed thermal pad. This page organizes the key specifications, package information, practical design considerations, application fit, and verified drop-in alternatives around the ADV7280KCPZ-M. It helps engineers compare channel count, package, output interface, and control requirements before committing the decoder to a board layout or production design.

RFQ پەیوەندی
ADV7280WBCPZ - 10-Bit Video Decoder | Analog Devices
ADV7280WBCPZ

ADV7280WBCPZ - 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7280WBCPZ is a 10-bit, four-times-oversampled SDTV video decoder with deinterlacing, automatic NTSC, PAL, and SECAM detection, and a 32-LFCSP 5 x 5 mm package. It accepts composite, S-Video, and component video and converts analog baseband signals into digital video data. Its principal digital output follows the 8-bit ITU-R BT.656 format, while its YCrCb 4:2:2 representation provides a structured color-space interface for downstream image-processing systems. The device also supports serial configuration through an I2C interface. A video decoder is an interface IC that translates analog baseband video into digital pixel data. In the broader signal-chain hierarchy, the ADV7280WBCPZ belongs to video interface ICs, codecs, and semiconductor signal-processing devices. Such decoders are commonly positioned after camera, broadcast, surveillance, or video-conversion equipment and before a digital processor, frame buffer, display controller, or encoder. Their primary function is to normalize multiple analog television formats into a digital interface suitable for further processing. The ADV7280 family provides automatic multiformat detection for worldwide NTSC, PAL, and SECAM signals. Four-times oversampling supports conversion of composite, S-Video, and component video, while the integrated deinterlacer addresses interlaced source material. The 10-bit conversion identifies the internal video-processing resolution, and the resulting 8-bit ITU-R BT.656 stream uses a conventional parallel pixel interface with a line-locked clock and synchronization outputs. Digital integration through I2C allows an embedded controller to configure and monitor the decoder rather than relying on a fixed hardware setup. The ADV7280WBCPZ also has an automotive-oriented ordering designation identified by the product listing as AEC-Q100. In a system-level design, this combination of multiformat detection, deinterlacing, digital output, and serial control reduces the need for separate decoder blocks and allows one device to support several analog video standards. Typical uses include automotive display systems, surveillance-video conversion, broadcast and professional video equipment, industrial camera interfaces, and embedded video capture. In these applications, the decoder can normalize an incoming composite or component signal, generate a stable digital pixel stream, and pass synchronization information to the downstream processor. The manufacturer datasheet identifies the output format as ITU-R BT.656, including a line-locked clock and synchronization signals. PCB implementation should preserve short, controlled analog video paths and provide a stable digital return path between the decoder and the following processor. Analog and digital supply rails should be decoupled according to the manufacturer application guidance, while the exposed-pad thermal design should be evaluated for the final board stack-up and enclosure. Because the device combines analog input conversion with digital timing, trace routing and return-path continuity directly affect picture quality. This page consolidates the ADV7280WBCPZ format support, interface architecture, package information, replacement analysis, and practical integration guidance. It is designed to help engineers compare the decoder with related Analog Devices video-interface options and build an interoperable analog-video acquisition path without overlooking software compatibility, package details, or thermal-layout requirements.

RFQ پەیوەندی
ADV7280WBCPZ-RL - 10-Bit 4x Oversampled SDTV Video Decoder | Analog Devices
ADV7280WBCPZ-RL

ADV7280WBCPZ-RL - 10-Bit 4x Oversampled SDTV Video Decoder | Analog Devices

The Analog Devices ADV7280WBCPZ-RL is a one-chip multiformat analog video decoder with a 10-bit, 4x oversampled ADC front end and an on-chip deinterlacer, delivered in a 32-lead LFCSP (5 mm x 5 mm) package with an exposed pad, supplied on tape and reel. It automatically detects NTSC, PAL and SECAM composite and S-Video baseband inputs and converts them to digital ITU-R BT.656 video data. A video decoder is an interface IC that sits between an analog video source - camera, CCTV DVR, set-top box analog front end or legacy broadcast chain - and a digital processor. In the product taxonomy it belongs to video interface ICs, a sub-class of interface ICs, which in turn are integrated circuits dedicated to moving and conditioning data between a sensor or source and a host processor. The decoder's job is sampling the analog waveform with adequate resolution and timing recovery, then serializing the result into a standard digital stream the host can consume. Key features of the ADV7280 family include automatic format detection without host intervention, a 10-bit ADC that delivers more headroom than 8-bit converters for color rendition and gradient smoothness, 4x oversampling that places analog Nyquist filtering and anti-alias behavior on-chip, and a line-locked clock (LLC) output plus horizontal and vertical synchronization outputs for downstream framing. The serial output is the standard ITU-R BT.656 format, so existing BT.656-capable SoCs, FPGAs and USB capture engines can be connected with minimal glue logic. Technically the device combines a differential-to-single-ended input stage, a 10-bit successive-approximation style ADC, an automatic gain control and chroma decoding path, a comb filter and motion-adaptive deinterlacer, and a digital output formatter. Because deinterlacing is performed on-chip, the host processor does not need field buffers, which reduces both system cost and software complexity. The part is designed for industrial temperature operation, and the family includes a portable/MIPI-oriented variant alongside the standard parallel BT.656 device described here. Typical uses include CCTV and security camera DVR front ends, video capture cards for PC and industrial PC systems, industrial vision equipment, professional and consumer broadcast and video-conferencing hardware, and automotive or industrial video-distribution modules that ingest legacy composite video while an FPGA or SoC performs scaling and encoding. A key design consideration is that the analog input stage determines image quality: correct termination, chroma and sync separation, and an unobstructed ground return to the composite or S-Video source matter as much as the converter itself. Place the analog traces short and away from high-speed digital and switching-supply nodes, keep the exposed pad solidly tied to ground with a solid thermal-via array, and follow the reference layout in the manufacturer datasheet for the crystal/clock and power-supply sections. This page consolidates manufacturer and distributor information into a single engineering view: verified specification summary, a package and footprint reference, pin-level design notes, drop-in and near-drop-in replacement options with quantified differences, and application guidance that goes beyond the headline data sheet entries.

RFQ پەیوەندی
ADV7281WBCPZ - 10-Bit SDTV Video Decoder | Analog Devices
ADV7281WBCPZ

ADV7281WBCPZ - 10-Bit SDTV Video Decoder | Analog Devices

The Analog Devices ADV7281WBCPZ is a 10-bit, 4-times-oversampled SDTV video decoder with four analog inputs and a 32-lead LFCSP package measuring 5 mm by 5 mm. It automatically detects composite, S-Video, and component video signals compatible with worldwide NTSC, PAL, and SECAM standards, then converts them into a digital YCrCb 4:2:2 video stream. A video decoder is an interface IC that translates legacy analog baseband video into a standardized digital representation for processing, display, capture, or transmission. Within the signal-chain hierarchy, the ADV7281 sits between an analog video source and a digital video processor. Its 4:2:2 chroma format reduces data rate relative to full 4:4:4 sampling while preserving the luma and chroma information required by many SDTV applications. The ADV7281 uses 4-times oversampling to improve decoding of analog video, and its 10-bit internal resolution supports detailed conversion of composite, S-Video, and component formats. Differential-input capability improves common-mode noise rejection when the source is balanced. The decoder also provides standard ITU-R BT.656 output through the P0-to-P7 data pins, together with a line-locked clock output for synchronization with downstream digital-video circuitry. The device includes four analog video inputs and two standard-to-bar diagnostic outputs. Automatic signal detection reduces the configuration burden in systems that must accept several video standards. According to the Analog Devices ADV7281 Data Sheet, Rev. B, the component accepts single-ended, pseudo-differential, or fully differential analog inputs and emits a digital video stream based on the ITU-R BT.656 specification. The manufacturer identifies the ADV7281 family as not recommended for new designs. Typical uses include SDTV video capture, industrial inspection equipment, broadcast monitoring, professional video conversion, security systems, and legacy video interface adapters. The ADV7281 is especially appropriate when an equipment designer must accept multiple analog video standards while presenting a conventional digital-video interface to an FPGA, ASIC, processor, or display controller. PCB implementation should prioritize short analog traces, controlled return paths, and separate routing for analog inputs and digital outputs. Follow the manufacturer's decoupling and input network recommendations, and use the line-locked clock and reference interfaces exactly as described in the datasheet. Differential routing is beneficial when using fully differential sources, while single-ended routing requires appropriately scaled termination and biasing networks. This page combines the manufacturer's device description with a focused replacement assessment, interface comparison, and practical implementation guidance. It helps engineers separate true pin-compatible options from related ADV7281 variants that differ in input count, automotive qualification, or temperature coverage before committing a new board revision.

RFQ پەیوەندی
ADV7281WBCPZ-MA 10-Bit Video Decoder | Analog Devices
ADV7281WBCPZ-MA

ADV7281WBCPZ-MA 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7281WBCPZ-MA is a 10-bit, 4-times-oversampled analog video decoder with a 32-LFCSP 5 x 5 mm package. It converts NTSC, PAL, and SECAM composite, S-Video, and component video into an 8-bit YCrCb 4:2:2 stream delivered through a MIPI CSI-2 interface. The decoder accepts single-ended, pseudo-differential, and fully differential analog inputs. An analog video decoder extracts digital luminance and chrominance data from legacy baseband video signals. Within the signal-chain hierarchy, it is a video interface IC rather than a display driver: the ADV7281 family digitizes composite, S-Video, or component sources so that a portable device, automotive display, industrial imaging system, or security-camera controller can process standard-definition video digitally. Automatic format detection reduces configuration effort across regional television standards. The ADV7281-MA family provides a 10-bit internal decoding path with 4-times oversampling and supports both single-ended and differential analog arrangements. Its control interface is a 2-wire bidirectional serial port compatible with I2C programming conventions. The manufacturer identifies the decoder as a 1.8 V CMOS device, while the listed operating supply ranges include 1.71 V to 1.89 V and 2.97 V to 3.63 V. The industrial temperature rating extends from -40 C to +105 C. Analog Devices states that the ADV7281-M and ADV7281-MA convert analog video into an 8-bit YCrCb 4:2:2 data stream for transmission over the Mobile Industry Processor Interface, commonly called MIPI CSI-2. This architecture preserves a compact digital transport between the decoder and an embedded video processor instead of requiring parallel pixel buses. The LFCSP package also provides a practical option for space-constrained portable equipment. Typical uses include automotive center displays, rear-view camera systems, portable media equipment, industrial control panels, security cameras, and consumer devices that must ingest legacy analog video. The decoder is particularly relevant where composite, S-Video, or component inputs coexist with a CSI-2 video pipeline and automatic NTSC, PAL, and SECAM recognition is valuable. For PCB design, treat analog video routing as a controlled-impedance signal path and keep the decoder, termination network, and supporting clock or decoupling components close to one another. Confirm the exact pin assignments, exposed-pad connection, supply sequencing, and external component recommendations in the manufacturer datasheet before fabrication. This product reference combines the manufacturer’s decoder architecture, supported video formats, interface characteristics, supply ranges, and package information with practical guidance for analog-video routing, power planning, firmware setup, and selecting an ADV7281-family alternative.

RFQ پەیوەندی
ADV7281WBCPZ-RL - 10-Bit SDTV Video Decoder | ADI
ADV7281WBCPZ-RL

ADV7281WBCPZ-RL - 10-Bit SDTV Video Decoder | ADI

The Analog Devices ADV7281WBCPZ-RL is a 10-bit, 4× oversampled SDTV video decoder with differential analog inputs and digital video output in a 32-lead LFCSP package measuring 5 mm × 5 mm × 0.75 mm. It accepts analog baseband video and produces YCrCb 4:2:2 pixel data according to the ITU-R BT.656 specification. A video decoder is an interface IC that converts legacy analog composite, S-Video, or component video into a digital pixel stream suitable for display, processing, or capture electronics. Within the signal-chain hierarchy, the ADV7281 belongs to the video interface IC category and bridges analog video sources to digital bus-oriented processing systems. The device automatically detects worldwide NTSC, PAL, and SECAM analog baseband signals. Its 8-bit parallel data output is carried on pins P0 through P7, while a line-locked clock provides the timing reference. A 2-wire I2C-compatible serial interface supports configuration and control. Differential inputs and oversampling support the decoder's role in professional video, broadcast, security, and industrial imaging equipment. Internally, the ADV7281 performs analog-to-digital conversion, decoding, color processing, and digital output formatting within one device. The datasheet describes diagnostic functionality through programmable reference comparison and slice-level controls, allowing a diagnostic signal to indicate when a monitored level is exceeded. Typical uses include SDTV video capture, broadcast monitoring, CCTV and surveillance camera interfaces, industrial imaging, video walls, and legacy video-to-digital equipment. The 32-LFCSP construction supports compact designs, while the exposed pad assists thermal performance when the board provides suitable copper area. For implementation, follow the manufacturer’s recommended analog input network, supply decoupling, clock connections, and exposed-pad layout. Differential input routing should be compact and appropriately terminated, and the I2C address and register configuration must be checked against the host controller before enabling normal video output. This page combines device-specific decoding capabilities, verified package and lifecycle information, same-family replacement options, interface comparisons, and practical PCB guidance to support faster component selection and implementation.

RFQ پەیوەندی
ADV7282AWBCPZ-M - 10-Bit Video Decoder | Analog Devices
ADV7282AWBCPZ-M

ADV7282AWBCPZ-M - 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7282AWBCPZ-M is a 10-bit, 4-times-oversampled SDTV video decoder with six analog inputs, three general-purpose outputs, differential-input support, and an I2C-compatible control interface. The device is packaged in a 32-lead LFCSP measuring 5 mm by 5 mm. According to the Analog Devices product page, it converts supported analog baseband video signals into an 8-bit YCrCb 4:2:2 data stream for transmission through a MIPI CSI-2 interface. A video decoder is an interface IC within the broader video-processing hierarchy. Its function is to digitize analog composite or component video, recover timing and chrominance information, and present structured digital pixel data to a host processor, image processor, display controller, or recording system. The ADV7282-M family supports single-ended, pseudo-differential, and fully differential analog input arrangements, providing flexibility when routing camera or video-converter outputs into an embedded system. Key features include 10-bit video resolution, four-times oversampling, six analog video inputs, three general-purpose outputs, and serial configuration through a 2-wire bidirectional interface compatible with I2C. The decoder uses a 1.8 V CMOS process. Its six-input architecture reduces the need for separate decoder devices when several camera channels, auxiliary video sources, or composite-video signals must be monitored through one host interface. Technical operation combines analog-to-digital conversion with decoding of standard analog baseband video formats. Oversampling increases the density of samples used during the conversion process, while YCrCb 4:2:2 output separates luminance from chroma and reduces the data rate required to transport video. The MIPI CSI-2 output provides a standardized connection to compatible processors and embedded vision platforms. Typical applications include automotive infotainment and surround-view systems, industrial machine vision, consumer navigation equipment, security cameras, medical imaging interfaces, and embedded displays. Differential inputs are especially useful when the source has a differential video architecture and the PCB must minimize noise coupling. The compact 32-lead LFCSP also supports space-constrained camera and display designs. Layout should preserve controlled-impedance routing for MIPI lanes, keep analog inputs away from switching nodes, and follow the Analog Devices reference-layout and decoupling guidance. Pay particular attention to exposed-pad thermal management, analog and digital return paths, and the input network selected for each video source. Confirm the exact input standard, synchronization method, timing, pin assignments, and system power sequence before releasing the PCB. This page organizes the device function, verified electrical facts, application guidance, package constraints, and directly related family options into an engineering-focused selection resource. It also distinguishes confirmed drop-in options from related variants so that footprint, software, ordering-code, and temperature-grade differences are considered before PCB reuse.

RFQ پەیوەندی
ADV7282WBCPZ - 10-Bit SDTV Video Decoder | Analog Devices
ADV7282WBCPZ

ADV7282WBCPZ - 10-Bit SDTV Video Decoder | Analog Devices

Analog Devices ADV7282WBCPZ is a 10-bit, 4-times-oversampled SDTV video decoder with differential analog inputs and a deinterlacer, packaged in a 32-LFCSP 5 x 5 mm surface-mount package. The device receives analog composite video and produces a digital video stream compliant with the ITU-R BT.656 specification. Its digital output uses the P0 through P7 data pins, while a line-locked clock provides the timing reference for the encoded pixel stream. The decoder also exposes serial I2C control, allowing an embedded processor to configure operating controls such as brightness, contrast, saturation, and hue. An SDTV video decoder is an interface IC that converts analog composite-video signals into a digital pixel stream for subsequent processing or display. In the broader device hierarchy, the ADV7282 belongs to video interfaces, interface ICs, and semiconductors. Its principal function is to sample incoming video, separate luminance and chrominance information, convert the analog representation into 10-bit digital data, and serialize that data according to a defined digital-video timing format. The ADV7282 provides 10-bit video decoding with 4-times oversampling, differential inputs, and an integrated deinterlacer. Its ITU-R BT.656 output uses eight parallel pixel-data pins and a line-locked clock. The I2C interface supports programmable video controls, including brightness, contrast, saturation, and hue. These features make the decoder suitable for analog video capture, broadcast and professional video equipment, security imaging, and legacy video interfaces requiring digital conversion. The ADV728x family architecture includes an adaptive five-line, two-dimensional comb filter designed to improve separation of chrominance and luminance from composite video. The filter automatically adapts its processing mode to the video standard and signal quality. This behavior is particularly useful when composite-video signals contain noise, color bleed, or other artifacts that must be separated before digital rendering. The family architecture is documented in the ADV7280/ADV7281/ADV7282/ADV7283 Hardware Reference Manual. Typical applications include SDTV video capture, professional broadcast equipment, surveillance systems, video test and measurement equipment, and embedded systems that need to retain an analog composite-video input while passing digital video to a processor or display pipeline. Differential inputs can simplify signal-chain design when the source supports balanced analog video, while the line-locked clock gives downstream digital-video logic a dedicated timing signal. Designers should follow the manufacturer pin-description table and recommended application circuit when assigning tracks, power, grounding, and signal-conditioning components. The analog and digital sections require careful layout because video decoding performance depends on clean differential input routing, controlled return paths, and stable supply references. The device is specifically marked by Analog Devices as not recommended for new designs, so it is most appropriate for maintenance, continuity, and previously qualified designs rather than new platform creation. This page consolidates the decoder identity, functional characteristics, lifecycle position, and design considerations into an engineer-focused reference. It also distinguishes genuine drop-in options from functionally similar devices that use different packages, preventing a nominal decoder substitution from becoming a hidden PCB-rework problem.

RFQ پەیوەندی
ADV7282WBCPZ-RL - 10-Bit SDTV Video Decoder | Analog Devices
ADV7282WBCPZ-RL

ADV7282WBCPZ-RL - 10-Bit SDTV Video Decoder | Analog Devices

The Analog Devices ADV7282WBCPZ-RL is a 10-bit, 4× oversampled SDTV video decoder with differential analog inputs and deinterlacing, housed in a 32-lead LFCSP package measuring 5 mm × 5 mm. The device converts analog video into digital video compliant with the ITU-R BT.656 specification and supports serial configuration through an I2C-compatible two-wire interface. Its 1.8 V CMOS implementation supports compact portable and embedded video systems. A video decoder is an interface IC that reconstructs digital pixel and timing information from an analog video signal. In the product hierarchy, the ADV7282 belongs to the video-interface family within interface ICs. It samples an incoming composite or component signal at four times the base video rate, performs the required decoding and deinterlacing functions, and presents a standardized digital video stream to a host processor, image pipeline, or display controller. Key features include 10-bit video digitization, 4× oversampling, differential inputs, integrated deinterlacer functionality, and an ITU-R BT.656 parallel output. The decoder provides eight video data outputs, P0 through P7, together with a line-locked clock output for synchronization with downstream digital-video circuitry. Configuration is performed through a bidirectional two-wire serial port compatible with I2C, allowing a host controller to adjust operating parameters without external programming devices. The ADV7282 is fabricated in a 1.8 V CMOS process and operates from a 2.8 V to 3.1 V analog supply and a 1.62 V to 1.8 V digital supply, depending on the specific device configuration. Its 32-LFCSP construction reduces board area compared with larger leaded packages while retaining the exposed thermal pad and ground-oriented land pattern used in space-constrained portable equipment. Analog Devices identifies the ADV7282 family as not recommended for new designs, so lifecycle planning should account for the device's mature platform status. Typical uses include SDTV video capture, camera and surveillance signal conditioning, portable media equipment, industrial video panels, and embedded display systems. Differential analog inputs are particularly useful when the source uses a balanced or noise-sensitive video connection, while the deinterlacer supports conversion of interlaced source material into digital frames for downstream processing. The 5 mm × 5 mm footprint also benefits compact portable products where connector and processor placement constrain the available board area. For new designs, evaluate the input bandwidth, synchronization, and deinterlacing requirements against the complete ADV7282 signal-chain requirements. Keep analog and digital return paths appropriately separated, follow the manufacturer's recommended decoupling and exposed-pad layout, and treat the I2C configuration address and register defaults as part of the firmware contract. Because the family is not recommended for new designs, confirm availability and product-change status before committing a production platform. This page combines the manufacturer's functional description with practical placement, interface, lifecycle, and drop-in comparison guidance. It highlights the relationship between the standard, mobile-oriented, and automotive-related ADV7282 variants while keeping package, interface, and lifecycle differences visible for engineering review.

RFQ پەیوەندی