بەرهەمەکان (130+)

ADV7283BCPZ - 10-Bit SDTV Video Decoder | Analog Devices
ADV7283BCPZ

ADV7283BCPZ - 10-Bit SDTV Video Decoder | Analog Devices

The Analog Devices ADV7283BCPZ is a 10-bit, 4x oversampled multiformat SDTV video decoder with differential inputs and an integrated deinterlacer, housed in a 32-pin LFCSP (5 mm x 5 mm) exposed-pad package. It automatically detects worldwide NTSC, PAL and SECAM analog baseband video signals delivered as composite (CVBS), S-Video or component video. A video decoder is an analog front-end mixed-signal IC that converts standard-definition analog video into a digital bit stream. Within the signal-chain hierarchy, it sits below high-definition video decoders and above discrete ADC solutions, forming part of the broader video interface and codec family of semiconductors. Its output is an 8-bit ITU-R BT.656 compatible YCrCb 4:2:2 video data stream, clocked by a line-locked clock (LLC) output on the P0 to P7 data pins. Key features include a 10-bit ADC front end with 4x oversampling for robust signal capture, automatic format detection covering NTSC/PAL/SECAM, support for CVBS, S-Video and component inputs, and a built-in deinterlacer that converts interlaced sources into progressive output. Differential input architecture improves common-mode noise rejection in electrically noisy environments. The device is fabricated in a 1.8 V CMOS process and programmed via a 2-wire I2C-compatible serial bidirectional interface, simplifying host processor integration. The exposed-pad LFCSP package aids thermal and ground performance while saving board area, and the part is supplied in a RoHS-compliant, surface-mount form suitable for high-volume assembly. Jotrin Electronics lists the device as an automotive-grade video decoder, reflecting qualification for in-vehicle vision applications. Typical applications include automotive rear-view and surround-view camera systems, industrial machine-vision capture, video-over-networked gateways that need to digitize legacy analog cameras, and set-top or surveillance equipment interfacing analog sources to digital processors. For best results, route the analog inputs differentially where possible, keep the BT.656 P0-P7 bus short and matched in length to the LLC clock, and follow the register configuration scripts in the Analog Devices design support files, since power-up register state requires initialization over I2C before stable decoding is achieved. This page adds distributor-derived comparison data, drop-in same-family alternatives, application guidance, and sourcing information not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
ADV7283WBCPZ-RL - 10-Bit Video Decoder | Analog Devices
ADV7283WBCPZ-RL

ADV7283WBCPZ-RL - 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7283WBCPZ-RL is a 10-bit multiformat analog video decoder with four-times oversampling, differential inputs, and an integrated deinterlacer in a 32-lead LFCSP package. It automatically detects NTSC, PAL, and SECAM composite, S-Video, and component signals and converts them into a YCrCb 4:2:2 stream compatible with the 8-bit ITU-R BT.656 interface. The device uses an I2C control interface for configuration and status access. A video decoder is an interface IC that translates legacy analog baseband video into a digital representation suitable for display, capture, conversion, or broadcast equipment. Within the signal-chain hierarchy, the ADV7283 belongs to the video codec and data-converter category, where analog-to-digital decoding precedes frame processing, scaling, encoding, or transmission. Its multiformat detection reduces the need for separate analog front ends for different television standards. The decoder provides 10-bit digital video output and supports composite, S-Video, and component inputs. Differential analog inputs are intended for properly balanced source networks, while four-times oversampling supports robust reconstruction and filtering of the decoded video signal. An integrated deinterlacer provides the required conversion between interlaced and progressive scan representations. Control through I2C allows an embedded system to select operating parameters and read status information without dedicated parallel control signals. The ADV7283 outputs its digital stream on the P0 through P7 data pins together with a line-locked clock, following the timing relationship specified for ITU-R BT.656. Its analog supply and digital interfaces support integration into multiformat video processing systems. The 5 mm by 5 mm LFCSP-32 construction provides a compact surface-mount option, although its exposed thermal pad and high-speed signals require careful PCB implementation. Typical uses include legacy video capture in industrial monitoring equipment, broadcast test systems, consumer television and set-top designs, video-conversion products, and laboratory instrumentation. The decoder is particularly appropriate when one board must accept multiple analog video standards while presenting a standardized digital output to an FPGA, ASIC, or embedded processor. The I2C programming interface also simplifies integration with system control firmware. Careful analog layout is essential because video signals must retain adequate signal integrity from the connector through the differential input network. The digital output clock and data traces should be routed with controlled impedance and short return paths, while the exposed pad requires a complete thermal-via and ground-plane arrangement. Verify supply sequencing, I2C addressing, synchronization timing, and deinterlacing behavior across every supported input format before production release. This page consolidates the decoder's format support, interface characteristics, package information, replacement considerations, and practical integration guidance into an engineering-oriented selection reference. It also identifies where package pinning, electrical limits, and complete compliance details must be checked against the manufacturer datasheet before layout or qualification.

RFQ پەیوەندی
ADV7301AKST - 12-Bit Video Encoder | Analog Devices
ADV7301AKST

ADV7301AKST - 12-Bit Video Encoder | Analog Devices

Analog Devices ADV7301AKST is a multiformat SD, progressive-scan, and HDTV video encoder with six NSV 12-bit DACs, a 108 MHz internal processing clock, and a 64-LQFP surface-mount package measuring 10 mm by 10 mm. It accepts 2.5 V and 3.3 V power supplies and is designed for DVD equipment, set-top boxes, and related digital video systems. A video encoder is an interface IC that converts digital video signals into analog video outputs suitable for display and broadcast equipment. This device combines digital video processing with six 12-bit digital-to-analog converters, allowing multiple analog outputs to be produced without requiring six separate external DACs. In the broader hierarchy, it belongs to the video interface and signal-conversion IC category, combining video encoding, DAC output, and analog-video generation in one package. The six 12-bit DAC channels provide 4096 possible quantization levels per output, supporting detailed reconstruction of composite and component video signals. The 108 MHz processing clock supports multiformat operation identified by Analog Devices for PAL and NTSC systems. Operation from 2.5 V and 3.3 V supplies also makes the device suitable for conventional consumer and set-top-box power architectures. The ADV7301AKST integrates encoded video generation with six NSV DAC outputs instead of separating those functions into independent components. This integration can simplify a multichannel analog-video output section, shorten interstage connections, and reduce board area. The 64-LQFP package exposes the control, digital-video, clock, power, synchronization, and analog-output functions required for a complete encoder implementation. Typical uses include DVD players, set-top boxes, video-conversion equipment, and professional video systems that require multiple analog outputs. It is particularly relevant when a design needs PAL or NTSC-compatible analog video generation alongside a digital video source. The operating-temperature range of 0°C to 70°C targets commercial equipment rather than extended industrial or automotive environments. The principal design consideration is board-level implementation of high-speed digital-video and analog-video signals. Controlled impedance routing, short clock paths, careful grounding, and isolation between digital switching activity and sensitive video outputs are necessary for stable picture quality. Output filtering, termination, and connector design must also follow the analog video requirements of the target system. This product overview combines the manufacturer-defined encoder features, package information, supported standards, and application guidance with practical PCB considerations for evaluating the ADV7301AKST in multichannel analog-video equipment.

RFQ پەیوەندی
ADV7311KST - 6-DAC 12-Bit Video Encoder | Analog Devices
ADV7311KST

ADV7311KST - 6-DAC 12-Bit Video Encoder | Analog Devices

The Analog Devices ADV7311KST is a high-speed digital-to-analog video encoder with six 12-bit NSV DACs, a 216 MHz multiformat processing interface, and a 64-LQFP package measuring 14 x 14 mm. It converts digital high-definition and standard-definition video into analog CVBS, S-Video, YPbPr, or RGB outputs. Separate 8-, 10-, 16-, and 20-bit input ports support different source formats, while TTL-compatible inputs provide a direct interface for compatible digital video signals. A video encoder is an interface IC that bridges digital video-processing systems and analog displays or video equipment. In the semiconductor hierarchy, it belongs to interface ICs and performs digital-to-analog conversion as well as timing and signal-format encoding. The ADV7311 is designed for professional video conversion, broadcast equipment, progressive-scan systems, and legacy analog-video connectivity. The main feature set includes six NSV video DAC channels, 12-bit DAC resolution, a stated 216 MHz encoder rate, and support for high-definition and standard-definition formats. Its separate input ports allow a system designer to accommodate different digital word lengths without forcing one common bus width. The device can generate composite, S-Video, component, or RGB analog signals, reducing the need for several discrete conversion paths in a multi-output video system. The ADV7311 architecture combines digital video input, internal encoding and timing functions, and six high-speed NSV DACs on one monolithic chip. According to the Analog Devices ADV7311 product page, external circuitry is used for some standards and output requirements. Consequently, board-level planning must account for external synchronization, filtering, connector routing, grounding, and the selected analog-output topology rather than treating the IC as a standalone video output stage. Typical applications include SDI-to-analog video conversion, professional broadcast monitoring, video test equipment, digital signage with legacy displays, security-video installations, and video switchers supporting composite or component outputs. The broad output-format support is useful where one digital source must feed more than one analog destination. A critical design consideration is signal integrity. Digital data, synchronization signals, analog outputs, reference connections, and power planes should follow the manufacturer datasheet layout guidance. Keep sensitive routes away from switching nodes, use a continuous ground reference, and verify the chosen output network and external components against the required video standard before production. This page consolidates verified product capabilities, package information, sourcing links, and engineering guidance. It also distinguishes documented drop-in replacements from broad functional substitutes, helping engineers assess PCB compatibility before considering a migration.

RFQ پەیوەندی
ADV7320KSTZ - 216 MHz 6-DAC Video Encoder | Analog Devices
ADV7320KSTZ

ADV7320KSTZ - 216 MHz 6-DAC Video Encoder | Analog Devices

The Analog Devices ADV7320KSTZ is a multiformat 216 MHz digital-to-analog video encoder with six NSV 12-bit DACs, packaged in a 64-LQFP measuring 10 mm by 10 mm. It accepts digital video inputs and produces analog CVBS, S-Video, YPbPr, or RGB output signals for standard-definition, progressive-scan, and high-definition video equipment. A video encoder is an interface and signal-conversion integrated circuit that translates digital pixels into legacy or component analog video signals. Within the product hierarchy, the ADV7320KSTZ belongs to the video encoder and video DAC family of interface ICs. Its six high-speed NSV DACs provide separate or configurable analog channels, while the multiformat architecture supports professional broadcast, set-top-box, DVD, recording, and digital-display applications. The device supports high-definition 4:2:2 and 4:4:4 parallel YCrCb input formats. Listed compatibility includes SMPTE 274M at 74.25 MHz, SMPTE 296M for 720p, and SMPTE 240M for 1035i. It also accepts 10-bit RGB 4:4:4 data. These formats allow the encoder to bridge digital video-processing pipelines to analog composite, S-Video, and component outputs without requiring separate external DAC banks. The 216 MHz operating rate and six 12-bit DACs distinguish the ADV7320 from lower-rate encoders intended only for standard-definition video. The manufacturer describes enhanced performance and CGMS-A support for 625p output standards, helping conforming DVD players and recorders implement copy-protection signaling. Exact input timing, voltage, current, temperature, and DAC-output limits must be confirmed against the manufacturer datasheet before a production design is released. Typical deployments include professional video routers, broadcast monitor interfaces, DVD and set-top-box output stages, video-recorder products, and professional playback equipment requiring multiple analog outputs. Because high-speed analog video signals are sensitive to impedance discontinuities, power-supply noise, grounding errors, and clock or data timing violations, the board layout should use controlled-impedance routing, short video traces, adequate return paths, and clean supply filtering. A key design consideration is to preserve the supported digital timing and synchronization arrangement between the source device and the encoder. The ADV7320KSTZ is best suited to designs whose source can provide the documented pixel format, clocking, voltage levels, and timing rather than merely any generic parallel video interface. Its multiformat processing and integrated DAC count make it a strong fit for equipment that must generate several analog outputs from one digital video source. This page consolidates the manufacturer product information, verified technical characteristics, package details, application guidance, and drop-in replacement analysis. It also highlights the need to verify every timing, electrical, and pin-level requirement against the current Analog Devices datasheet before using the encoder in new hardware.

RFQ پەیوەندی
ADV7341BSTZ - Multi-Format Video Encoder, 6x12-Bit DACs | Analog Devices
ADV7341BSTZ

ADV7341BSTZ - Multi-Format Video Encoder, 6x12-Bit DACs | Analog Devices

The Analog Devices ADV7341BSTZ is a high-speed, multi-format digital-to-analog video encoder integrating six 12-bit Noise Shaped Video (NSV) DACs in a 64-pin LQFP (10x10 mm) package. It encodes SD, ED (480P/576P), and HD (720p/1080i) video from a digital input data path up to 1920x1080 at 60 Hz, supporting composite (CVBS), S-Video (Y/C), and component (YPrPb/RGB) analog outputs. A video encoder is a mixed-signal IC that converts digital pixel data (such as ITU-R BT.656, ITU-R BT.1120, or HDMI-derived streams) into analog waveforms that legacy displays, broadcast modulators, and DVD/Blu-ray recorders can accept. The device sits at the boundary between the digital signal processor and the analog output stage, and its noise and linearity performance directly determine the perceived picture quality of the final output. Key features include six 12-bit NSV DACs running at up to 297 MHz, 74.25 MHz 20-/30-bit high-definition input support, full SMPTE compliance (SMPTE 259M, 274M, 296M, 424M, EA-861 and 170M), an integrated 54 MHz pixel clock PLL, an I2C device-host control port, and a 3.3 V analog/digital core supply with a 1.8 V logic option. The NSV architecture pushes DAC quantization noise above the video band, achieving effective >12-bit linearity with very low out-of-band noise. Typical applications include HDTV encoders, professional studio equipment, DVD and Blu-ray authoring, video capture cards, security DVRs, and industrial video recording systems. The wide format support allows a single encoder to replace several single-standard parts across standard-definition and high-definition product lines. When designing with the ADV7341BSTZ, observe the 64-LQFP power and ground pin layout carefully; provide a continuous ground plane and decouple each supply pin with 100 nF plus 10 uF bulk capacitors placed within 3 mm of the pin. Use controlled-impedance (75 ohm) traces for the analog outputs, and AC-couple the outputs through 220 uF or larger coupling capacitors to the connector.

RFQ پەیوەندی
ADV7343WBSTZ - 6-Channel 11-Bit Video Encoder | Analog Devices
ADV7343WBSTZ

ADV7343WBSTZ - 6-Channel 11-Bit Video Encoder | Analog Devices

Analog Devices ADV7343WBSTZ is a multiformat video encoder with six 11-bit, 297 MHz digital-to-analog converters in a 64-lead LQFP package measuring 10 x 10 mm. The converter operates from a 3.3 V supply and can produce composite CVBS, S-Video Y/C, and component YPrPb or RGB analog outputs for standard-definition, enhanced-definition, and high-definition video systems. A video encoder is an interface IC that converts digital video data into analog signals suitable for display, recording, broadcast, or video-processing equipment. Within the broader semiconductor hierarchy, the ADV7343 belongs to the video converter class, combining multiple high-speed DAC channels with digital video timing and output-control functions. This integration allows digital video systems to retain analog downstream interfaces without requiring six discrete converter packages. Six separate 11-bit DACs provide the channels needed to generate composite, S-Video, and component video simultaneously or under software control. The manufacturer identifies the DAC conversion rate as 297 MHz and the maximum analog output as 1.4 V. A listed linearity error of 0.0244% supports accurate signal generation, while the 3.3 V operating supply simplifies integration with contemporary digital video logic. The ADV7343 architecture is organized around a high-speed digital video input, programmable output and filtering functions, and six parallel video DACs. Its supported output formats include CVBS, S-Video, and component YPrPb/RGB, with operation covering standard-definition, enhanced-definition, and high-definition content. This broad format support makes one encoder useful in set-top equipment, DVD and Blu-ray playback systems, professional video processing, and broadcast infrastructure. The device is particularly appropriate when a system must convert digital video into several analog representations. A DVD or Blu-ray player can use it for legacy composite and S-Video compatibility, while a professional video processor can exploit component RGB or YPrPb outputs. The six-channel implementation also avoids the routing and component-count burden of multiple discrete video DACs. PCB design should preserve high-speed signal integrity around the digital input, clock, control, and analog output pins. Follow the Analog Devices datasheet pin-description table for the 64-lead LQFP assignments, route clocks away from analog outputs, and place bypass and interface components according to the manufacturer reference circuit. The industrial temperature range of -40°C to +85°C supports commercial and industrial equipment, although the manufacturer marks the ADV7343 as not recommended for new designs. This page consolidates the verified manufacturer and distributor information into an engineering-focused record of formats, converter resolution, package details, lifecycle position, sourcing questions, and design considerations. It also distinguishes confirmed pin-compatible substitutions from catalog entries that do not establish electrical equivalence, helping engineers avoid treating a superficially similar encoder as a true drop-in replacement.

RFQ پەیوەندی
ADV7390BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
ADV7390BCPZ

ADV7390BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

The Analog Devices ADV7390BCPZ is a low-power, chip-scale 10-bit SD/HD video encoder with three 2.7 V/3.3 V digital-to-analog converters, supplied in a 32-lead LFCSP-VQ package measuring 5 mm by 5 mm. It converts digital video into composite CVBS and Y-C component video signals for DVD equipment, game consoles, media players, and related consumer video systems. A video encoder is an interface integrated circuit that translates digital pixel data into analog video waveforms. Within the broader signal-processing hierarchy, the ADV7390BCPZ combines digital-to-analog conversion, filtering, output-driver circuitry, and video-timing control. Its three converter channels support composite and S-Video output formats, allowing multiple standard-definition signals to be generated from one compact device. The principal advantages are the 10-bit conversion resolution, integration of three video DACs, operation from 2.7 V or 3.3 V, and low-power chip-scale construction. The 5 mm by 5 mm LFCSP-VQ package reduces board area compared with discrete video-output circuitry. Its three-channel architecture also simplifies analog routing while preserving separate outputs for composite and Y-C video signals. Analog Devices describes the device as a high-speed digital-to-analog video encoder suitable for SD and HD video encoding. The manufacturer datasheet contains configuration, register, timing, and electrical details needed for firmware and hardware implementation. Designers should use the register descriptions and timing diagrams when configuring output formats, blanking levels, sync generation, and power-control behavior. Typical uses include DVD players, game consoles, media players, set-top equipment, video test systems, and industrial or professional video products that require standardized analog video outputs. The ADV7390BCPZ is particularly appropriate where multiple analog video channels, compact PCB area, and 10-bit output resolution are more important than support for new video-encoder designs. The principal design consideration is package and power planning. The LFCSP-VQ footprint requires careful pad layout, thermal-via placement, and clean analog routing around the video outputs. Power-supply design must accommodate the specified 2.7 V or 3.3 V operating condition, while the application circuit should follow Analog Devices reference guidance for decoupling, grounding, and output-network implementation. This product page combines the manufacturer specifications, sourcing information, interface guidance, and application-oriented design guidance for engineers evaluating the ADV7390BCPZ. Because Analog Devices marks the device as not recommended for new designs, it is best suited to maintaining existing SD or HD video products, repairing established equipment, or supporting a legacy platform with controlled lifecycle requirements.

RFQ پەیوەندی
ADV7390BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)
ADV7390BCPZ-REEL

ADV7390BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)

The Analog Devices ADV7390BCPZ-REEL is a low-power, chip-scale 10-bit SD/HD video encoder with three 2.7 V/3.3 V digital-to-analog converters, supplied in a 32-lead LFCSP-VQ package measuring 5 mm by 5 mm. It converts digital video into composite CVBS and Y-C component video signals for DVD equipment, game consoles, media players, and related consumer video systems. A video encoder is an interface integrated circuit that translates digital pixel data into analog video waveforms. Within the broader signal-processing hierarchy, the ADV7390BCPZ-REEL combines digital-to-analog conversion, filtering, output-driver circuitry, and video-timing control. Its three converter channels support composite and S-Video output formats, allowing multiple standard-definition signals to be generated from one compact device. The principal advantages are the 10-bit conversion resolution, integration of three video DACs, operation from 2.7 V or 3.3 V, and low-power chip-scale construction. The 5 mm by 5 mm LFCSP-VQ package reduces board area compared with discrete video-output circuitry. Its three-channel architecture also simplifies analog routing while preserving separate outputs for composite and Y-C video signals. Analog Devices describes the device as a high-speed digital-to-analog video encoder suitable for SD and HD video encoding. The manufacturer datasheet contains configuration, register, timing, and electrical details needed for firmware and hardware implementation. Designers should use the register descriptions and timing diagrams when configuring output formats, blanking levels, sync generation, and power-control behavior. Typical uses include DVD players, game consoles, media players, set-top equipment, video test systems, and industrial or professional video products that require standardized analog video outputs. The ADV7390BCPZ-REEL is particularly appropriate where multiple analog video channels, compact PCB area, and 10-bit output resolution are more important than support for new video-encoder designs. The principal design consideration is package and power planning. The LFCSP-VQ footprint requires careful pad layout, thermal-via placement, and clean analog routing around the video outputs. Power-supply design must accommodate the specified 2.7 V or 3.3 V operating condition, while the application circuit should follow Analog Devices reference guidance for decoupling, grounding, and output-network implementation. This product page combines the manufacturer specifications, sourcing information, interface guidance, and application-oriented design guidance for engineers evaluating the ADV7390BCPZ-REEL. Because Analog Devices marks the device as not recommended for new designs, it is best suited to maintaining existing SD or HD video products, repairing established equipment, or supporting a legacy platform with controlled lifecycle requirements.

RFQ پەیوەندی
ADV7390WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
ADV7390WBCPZ

ADV7390WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

The Analog Devices ADV7390WBCPZ is a low-power, chip-scale 10-bit SD/HD video encoder with three integrated DACs, supplied in a 32-lead LFCSP package measuring 5 mm by 5 mm. The device converts digital video into composite CVBS and S-Video Y-C outputs for DVD equipment, game consoles, and media-player systems. A video encoder is a mixed-signal semiconductor that translates digital pixels into standard-definition analog video waveforms. Within the signal-chain hierarchy, the ADV7390 belongs to the video-processing IC class and ultimately to the broader data-converter and signal-processing IC category. Its integrated DAC architecture combines digital timing generation, clock recovery, color processing, and analog output stages to reduce the component count required for composite-video output. Three 2.7 V or 3.3 V video DACs provide the core analog outputs. The encoder supports composite and S-Video operating modes, while a 16-times or 4-times oversampling PLL supports internal clock generation from the digital video interface. Power-management controls support low-power operation, and the device includes cable-detection capability. The family documentation also identifies synchronization controls for reset, horizontal sync, and vertical sync. The ADV7390 architecture is organized around a video timing generator, an 11-bit internal DAC datapath, a three-channel output multiplexer, and a reference and cable-detect section. Although the device is marketed as a 10-bit video encoder, the internal DAC structure includes an 11-bit stage, allowing the encoder to generate composite CVBS and S-Video outputs with reduced intermediate digital processing. Typical deployments include DVD players, game consoles, media players, industrial video equipment, and legacy analog-video conversion products. The small 5 mm by 5 mm LFCSP package supports compact consumer-electronics layouts, although careful decoupling and thermal design remain necessary around the analog output circuitry. When designing a new product, confirm that the ADV7390 is appropriate for the target channel standard and system lifecycle because Analog Devices marks it as not recommended for new designs. Existing equipment can still benefit from its three-DAC integration, but new platforms should evaluate current encoder families when long-term supply is a priority. This page combines manufacturer documentation, lifecycle information, drop-in family alternatives, package guidance, and application-oriented engineering notes to support board-level sourcing and design decisions.

RFQ پەیوەندی
ADV7390WBCPZ-RL - 10-Bit 3-Channel Video Encoder | ADI
ADV7390WBCPZ-RL

ADV7390WBCPZ-RL - 10-Bit 3-Channel Video Encoder | ADI

The Analog Devices ADV7390WBCPZ-RL is a 10-bit, three-channel digital-to-analog video encoder operating from a 2.7 V or 3.3 V supply and packaged in a 32-lead LFCSP measuring 5 mm by 5 mm. It converts digital video into composite CVBS and S-Video Y-C outputs through three integrated video DACs. The device is positioned for DVD players, game consoles, media players, portable video equipment, and other systems requiring low-power SD video generation. A video encoder is a data-converter IC that accepts digital pixel data and produces analog television signals. Within the broader signal-chain hierarchy, digital video input passes through a video encoder, its 10-bit DACs reconstruct the analog waveforms, and external filtering or connector networks deliver the result to a display or television equipment. The ADV7390 combines that conversion function in one monolithic IC while requiring relatively few external components. Three 10-bit video DAC channels form the core of the encoder. The manufacturer identifies support for composite CVBS and S-Video Y-C outputs, including NTSC and PAL composite formats. Operation from either 2.7 V or 3.3 V provides flexibility for compact consumer and industrial equipment. The low-power, chip-scale implementation is particularly useful where board area and energy consumption constrain the design. The ADV7390 belongs to a broader family of high-speed video encoders that also includes ADV7391, ADV7392, and ADV7393. Device selection within the family depends on the required combination of composite, S-Video, component-video, or other supported outputs and the associated feature set. For the ADV7390WBCPZ-RL specifically, the three-DAC architecture provides parallel conversion paths while the 10-bit quantization establishes the nominal video-data resolution. Typical implementations include analog television output for a DVD player, composite or S-Video connection from a game console, media-player video output, portable equipment with a TV-out function, and industrial monitoring or professional video systems that require a dedicated 10-bit encoding stage. The analog output path still requires the recommended passive networks and good PCB signal routing to achieve predictable video quality. Place the encoder near its digital-video source and analog output networks, and route each analog channel away from noisy switching nodes and digital clock signals. Pay particular attention to ground return paths, supply bypassing, and the impedance of the output network. The manufacturer's family datasheet and pin-description table should govern PCB land patterns, exposed-pad connection, and test-point access. This product page consolidates the verified device identity, package information, supported video functions, lifecycle information, and practical integration guidance. It also identifies family-level drop-in candidates separately from confirmed cross-brand equivalents, helping engineers evaluate PCB reuse without treating package similarity alone as proof of functional interchangeability.

RFQ پەیوەندی
ADV7391BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
ADV7391BCPZ

ADV7391BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

The ADV7391BCPZ is a low power, chip scale 10-bit SD/HD video encoder from Analog Devices, designed for converting digital video data into analog composite (CVBS), S-Video (Y-C), or component (YPrPb) signals. It integrates three 2.7 V/3.3 V 10-bit video DACs on a single monolithic chip, supporting a wide range of video standards including NTSC, PAL, and 720p/1080i HDTV formats. The device operates from a 1.71 V to 3.63 V supply, draws only 81 mA typical current, and is housed in a compact 32-lead LFCSP-VQ (5x5 mm) package, making it ideal for space-constrained applications. A video encoder is an integrated circuit that converts digital video data into analog video signals for display or transmission. It sits between a digital video source (such as a processor, FPGA, or camera) and an analog display or recording device. The ADV7391 belongs to the video encoder family, which is a subset of interface ICs, and ultimately falls under the broader category of mixed-signal semiconductors. Understanding this hierarchy helps engineers place the component within a system's signal chain. Key features of the ADV7391BCPZ include three 10-bit DACs with a sampling rate of 297 Msps, enabling high-definition video output. It supports both SD and HD formats, with automatic detection of input video standards. The device also includes a programmable filter for image enhancement, and a flexible digital input interface that accepts 8-bit or 16-bit data with separate HSYNC and VSYNC signals. Its low power consumption of 81 mA makes it suitable for battery-powered or thermally constrained designs. Technically, the ADV7391 uses a high-speed digital-to-analog conversion architecture with on-chip interpolation filters to reduce image artifacts. The three DACs can be configured independently, allowing simultaneous CVBS and S-Video outputs, or component YPrPb output. The device operates over the industrial temperature range of -40°C to +85°C, ensuring reliability in harsh environments. The LFCSP package provides excellent thermal performance and a small footprint, with an exposed pad for enhanced heat dissipation. Typical applications include set-top boxes, video players, displays, surveillance systems, and video conferencing equipment. The ADV7391 is particularly well-suited for designs that require both SD and HD analog output from a single chip, such as multi-standard video converters. Its low power and small size also make it attractive for portable video devices. When designing with the ADV7391, ensure proper decoupling of the power supply pins with 0.1 uF capacitors placed close to the device. The digital input timing must match the device's requirements for PCLK, HSYNC, and VSYNC to avoid glitches. Also, note that the ADV7391 is not recommended for new designs (NRND), so consider alternative parts for new projects.

RFQ پەیوەندی
ADV7391BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)
ADV7391BCPZ-REEL

ADV7391BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)

The ADV7391BCPZ-REEL is a low power, chip scale 10-bit SD/HD video encoder from Analog Devices, designed for converting digital video data into analog composite (CVBS), S-Video (Y-C), or component (YPrPb) signals. It integrates three 2.7 V/3.3 V 10-bit video DACs on a single monolithic chip, supporting a wide range of video standards including NTSC, PAL, and 720p/1080i HDTV formats. The device operates from a 1.71 V to 3.63 V supply, draws only 81 mA typical current, and is housed in a compact 32-lead LFCSP-VQ (5x5 mm) package, making it ideal for space-constrained applications. A video encoder is an integrated circuit that converts digital video data into analog video signals for display or transmission. It sits between a digital video source (such as a processor, FPGA, or camera) and an analog display or recording device. The ADV7391 belongs to the video encoder family, which is a subset of interface ICs, and ultimately falls under the broader category of mixed-signal semiconductors. Understanding this hierarchy helps engineers place the component within a system's signal chain. Key features of the ADV7391BCPZ-REEL include three 10-bit DACs with a sampling rate of 297 Msps, enabling high-definition video output. It supports both SD and HD formats, with automatic detection of input video standards. The device also includes a programmable filter for image enhancement, and a flexible digital input interface that accepts 8-bit or 16-bit data with separate HSYNC and VSYNC signals. Its low power consumption of 81 mA makes it suitable for battery-powered or thermally constrained designs. Technically, the ADV7391 uses a high-speed digital-to-analog conversion architecture with on-chip interpolation filters to reduce image artifacts. The three DACs can be configured independently, allowing simultaneous CVBS and S-Video outputs, or component YPrPb output. The device operates over the industrial temperature range of -40°C to +85°C, ensuring reliability in harsh environments. The LFCSP package provides excellent thermal performance and a small footprint, with an exposed pad for enhanced heat dissipation. Typical applications include set-top boxes, video players, displays, surveillance systems, and video conferencing equipment. The ADV7391 is particularly well-suited for designs that require both SD and HD analog output from a single chip, such as multi-standard video converters. Its low power and small size also make it attractive for portable video devices. When designing with the ADV7391, ensure proper decoupling of the power supply pins with 0.1 uF capacitors placed close to the device. The digital input timing must match the device's requirements for PCLK, HSYNC, and VSYNC to avoid glitches. Also, note that the ADV7391 is not recommended for new designs (NRND), so consider alternative parts for new projects.

RFQ پەیوەندی
ADV7392BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
ADV7392BCPZ

ADV7392BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

Analog Devices ADV7392BCPZ is a low-power, chip-scale 10-bit SD/HD video encoder with three 2.7 V or 3.3 V video DACs, supplied in a 40-LFCSP-WQ package measuring 6 mm by 6 mm. The device converts digital video signals into composite and S-Video outputs and is intended for DVD equipment, game consoles, media players, and other standard-definition or high-definition video systems. A video encoder is a signal-conversion integrated circuit that accepts digital pixel data and produces analog video suitable for display equipment or downstream transmission. In the broader product hierarchy, the ADV7392 belongs to video interface ICs, interface ICs, and integrated circuits. Its three internal DACs reduce the number of external video output stages required when a system must generate multiple analog video channels. The principal features of the ADV7392 include 10-bit video conversion, three integrated video DACs, operation from 2.7 V or 3.3 V, support for composite CVBS and S-Video, and a compact chip-scale package. These characteristics make the encoder useful where multiple analog video outputs must be generated without relying entirely on discrete DAC implementations. The low-power design is also relevant to portable and space-constrained media equipment. The ADV7390, ADV7391, ADV7392, and ADV7393 form a related family of monolithic high-speed digital-to-analog video encoders. The ADV7392 variant includes three 2.7 V or 3.3 V, 10-bit video DACs. Its pipeline timing is relevant to system integration because a falling HSYNC edge into the encoder produces a corresponding falling edge on the tri-level synchronization output after the pipeline delay defined in the manufacturer data sheet. Typical applications include DVD players, game consoles, media players, SD-video equipment, HD-video equipment, and multi-output analog video systems. In each case, the device serves as the final digital-to-analog conversion stage, with downstream circuitry handling output coupling, termination, filtering, or connector routing. Designers should treat the 6 mm by 6 mm LFCSP footprint as a compact but routed-layout challenge. PCB traces, bypass capacitors, analog video outputs, digital inputs, control signals, and power connections must be assigned according to the manufacturer pin-description table. Output filtering and impedance requirements should be derived from the data sheet rather than copied from a generic composite-video circuit. This page combines the manufacturer product information, family-level architectural context, package details, application guidance, and a strict drop-in comparison framework. It also identifies where device-specific electrical limits and pin assignments must be confirmed in the official ADV7390/ADV7391/ADV7392/ADV7393 data sheet before release to production.

RFQ پەیوەندی
ADV7392BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)
ADV7392BCPZ-REEL

ADV7392BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)

Analog Devices ADV7392BCPZ-REEL is a low-power, chip-scale 10-bit SD/HD video encoder with three 2.7 V or 3.3 V video DACs, supplied in a 40-LFCSP-WQ package measuring 6 mm by 6 mm. The device converts digital video signals into composite and S-Video outputs and is intended for DVD equipment, game consoles, media players, and other standard-definition or high-definition video systems. A video encoder is a signal-conversion integrated circuit that accepts digital pixel data and produces analog video suitable for display equipment or downstream transmission. In the broader product hierarchy, the ADV7392 belongs to video interface ICs, interface ICs, and integrated circuits. Its three internal DACs reduce the number of external video output stages required when a system must generate multiple analog video channels. The principal features of the ADV7392 include 10-bit video conversion, three integrated video DACs, operation from 2.7 V or 3.3 V, support for composite CVBS and S-Video, and a compact chip-scale package. These characteristics make the encoder useful where multiple analog video outputs must be generated without relying entirely on discrete DAC implementations. The low-power design is also relevant to portable and space-constrained media equipment. The ADV7390, ADV7391, ADV7392, and ADV7393 form a related family of monolithic high-speed digital-to-analog video encoders. The ADV7392 variant includes three 2.7 V or 3.3 V, 10-bit video DACs. Its pipeline timing is relevant to system integration because a falling HSYNC edge into the encoder produces a corresponding falling edge on the tri-level synchronization output after the pipeline delay defined in the manufacturer data sheet. Typical applications include DVD players, game consoles, media players, SD-video equipment, HD-video equipment, and multi-output analog video systems. In each case, the device serves as the final digital-to-analog conversion stage, with downstream circuitry handling output coupling, termination, filtering, or connector routing. Designers should treat the 6 mm by 6 mm LFCSP footprint as a compact but routed-layout challenge. PCB traces, bypass capacitors, analog video outputs, digital inputs, control signals, and power connections must be assigned according to the manufacturer pin-description table. Output filtering and impedance requirements should be derived from the data sheet rather than copied from a generic composite-video circuit. This page combines the manufacturer product information, family-level architectural context, package details, application guidance, and a strict drop-in comparison framework. It also identifies where device-specific electrical limits and pin assignments must be confirmed in the official ADV7390/ADV7391/ADV7392/ADV7393 data sheet before release to production.

RFQ پەیوەندی
ADV7392WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
ADV7392WBCPZ

ADV7392WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

The Analog Devices ADV7392WBCPZ is a low-power, chip-scale, 10-bit SD/HD video encoder packaged in a 40-LFCSP-WQ 6 mm × 6 mm surface-mount package. The device belongs to the ADV7390, ADV7391, ADV7392, and ADV7393 family of high-speed digital-to-analog video encoders and uses three 2.7 V or 3.3 V, 10-bit video DACs to generate analog composite and S-Video outputs. A video encoder is a data-converter IC that accepts digital video pixel data and converts it into analog video signals suitable for composite or S-Video equipment. Within the signal-chain hierarchy, the ADV7392 is a video encoder, an interface IC, and a data-converter IC. Its DAC-based output stage bridges digital video-processing circuitry and legacy analog displays, televisions, DVD equipment, game consoles, and media players. Principal characteristics include 10-bit video DAC resolution, support for SD and HD video formats, three analog video outputs, low-power operation, and a compact chip-scale package. The three-DAC arrangement allows one encoder to drive multiple analog outputs, reducing component count in systems that require composite and S-Video generation. The 40-LFCSP-WQ package also places the converter close to its digital input source and analog output connectors, which can help shorten sensitive routing paths. The ADV7390/ADV7391/ADV7392/ADV7393 family shares a common encoder architecture and digital timing approach. The manufacturer data sheet states that the digital timing specification section defines the falling-edge HSYNC behavior and the resulting tri-level synchronization timing at the analog output. Matching digital input timing, synchronization, and DAC settling requirements is essential when the encoder is used with an external FPGA, scaler, or video processor. Typical applications include DVD players, game consoles, media players, broadcast and professional video equipment, video capture hardware, and industrial display systems that require conversion from digital video to composite or S-Video. An FPGA-based source can feed parallel pixel data and synchronization signals while the ADV7392 handles the final digital-to-analog conversion stage. When laying out the board, place the encoder close to the analog output connectors, route synchronization and pixel-data traces as controlled-length digital interfaces, and decouple each analog supply rail locally. Confirm input format, pixel clock, synchronization polarity, output standard, and allowed timing margin against the manufacturer data sheet before the layout is released. This page consolidates the verified product identity, package information, family-level capabilities, lifecycle status, related encoder options, and application guidance into a design-focused reference for engineers evaluating the ADV7392WBCPZ.

RFQ پەیوەندی
ADV7400AKSTZ-80 10-Bit Multiformat Video Decoder | Analog Devices
ADV7400AKSTZ-80

ADV7400AKSTZ-80 10-Bit Multiformat Video Decoder | Analog Devices

The Analog Devices ADV7400AKSTZ-80 is a 10-bit integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer with 100 terminals, 0.5 mm terminal pitch, 1.8 V and 3.3 V power supplies, and an operating temperature range of -25°C to +70°C. It is packaged for surface-mount assembly in Analog Devices' 100-terminal STZ package. The device is positioned as a lower-cost alternative to the ADV7402 for designs requiring 8-bit accurate data resolution on smaller displays or in less demanding visual and recording applications. A multiformat video decoder is an interface IC that converts composite, component, or other supported analog video signals into digital pixel and timing data. In the broader semiconductor hierarchy, the ADV7400 belongs to the video decoder family, which is part of interface ICs and ultimately forms one stage of an analog-to-digital display signal chain. Its digitization function is commonly paired with a video encoder when a system must transmit processed images, or with display and image-processing circuitry when it must render captured video locally. The principal feature is 10-bit digital video processing combined with the ADV7402 digital-processing feature set, allowing engineers to balance display fidelity and signal-chain performance. The device accepts 1.8 V and 3.3 V supply rails, allowing it to coexist with modern digital logic operating at either interface level. A 0.5 mm terminal pitch supports a compact, high-pin-count surface-mount footprint, while the 100-terminal arrangement provides the connectivity required for multiformat video input, digital data, clocking, control, and power functions. The -80 ordering suffix identifies this exact speed-grade and package configuration. Variants of the ADV7400 family appear in the 100-terminal STZ form as well as the related BST packaging notation. Designers should verify the complete ordering code, pin descriptions, supported synchronization formats, analog input limits, and digital interface timing against the manufacturer datasheet before releasing a PCB or production build. The decoder is a signal-path component, so routing, grounding, power sequencing, and source-impedance matching can materially affect picture integrity. Typical applications include professional video monitoring, broadcast signal conversion, multimedia presentation equipment, security and surveillance displays, industrial vision interfaces, and legacy SDTV or HDTV digitization. In these systems, the ADV7400AKSTZ-80 can convert incoming analog video into a digital raster suitable for scaling, recording, encoding, or display processing. Its compact package is particularly useful when the video interface must coexist with substantial digital processing in a space-constrained circuit board. A critical design consideration is the separation of analog and digital return currents. Keep analog input traces short, use a continuous ground reference, place decoupling capacitors at the supply pins, and follow the manufacturer’s recommended input and output interface circuits. Avoid long routes through switching-power regions, and match impedance consistently on digital video buses. These practices reduce susceptibility to edge ringing, crosstalk, color artifacts, and synchronization errors. This product page consolidates the exact ordering information, package characteristics, operating limits, comparison points, and application-focused engineering guidance for the ADV7400AKSTZ-80. It also distinguishes the closest documented family alternatives while preserving the strict requirement that a replacement use the same 100-terminal package and be assessed for pin, speed-grade, and interface compatibility.

RFQ پەیوەندی
ADV7400KST-80 Multiformat Video Decoder | Analog Devices
ADV7400KST-80

ADV7400KST-80 Multiformat Video Decoder | Analog Devices

Analog Devices ADV7400KST-80 is a multiformat video decoder IC designed for advanced television signal chains, with the -80 speed-grade suffix identifying this ordering configuration. The device belongs to the ADV7400 multiformat video-decoder family and is supplied in the 80-lead KST surface-mount package. Its primary function is to accept compatible digital video streams, decode them, and provide reconstructed pixel data for subsequent display, conversion, processing, or transmission stages. A video decoder is an interface IC that converts encoded or compressed video data into a digital pixel representation that downstream processing equipment can understand. Within a television or video-processing system, this function sits between a video source and image-processing, display, scaler, or encoder circuitry. Multiformat decoder ICs combine several input standards and signal arrangements into one device, reducing the number of separate interface blocks required in a complex television design. The ADV7400 family is specifically associated with advanced television applications. Analog Devices positions the ADV7402 and ADV7400 devices as complementary multiformat video decoders within broader television signal chains that can also include graphics and HDMI or DVI receivers, video encoders, and video DACs. This system-level context matters because interface selection depends on pixel format, timing, port configuration, output destination, and the surrounding video architecture. The -80 ordering code identifies the ADV7400 variant configured for an 80 MHz operating class, subject to the detailed limits and test conditions listed in the manufacturer datasheet. The KST suffix identifies the 80-lead package used by this ordering variant. Package construction, exposed-pad requirements, soldering guidance, and maximum ratings must be followed directly from the package drawing and land-pattern information in the manufacturer datasheet. Typical ADV7400KST-80 applications include digital television front ends, television set-top equipment, video-conversion subsystems, image-processing chains, and industrial or professional displays that receive compatible multiformat digital video. Its role is especially relevant where the product needs reliable digital video reconstruction before pixels are scaled, encoded, transmitted, or displayed. The principal design consideration is system-level interface validation. Confirm the supported input format, expected pixel-clock range, active-pixel timing, power rails, synchronization requirements, and output destination before finalizing a board layout. Preserve the manufacturer-recommended decoupling and keep high-speed video traces short, properly referenced, and separated from noisy power-conversion stages. This product page combines the confirmed ADV7400KST-80 identity, exact ordering code, package family, and multiformat video-decoder use with practical interface-selection guidance. It also provides same-family drop-in candidates, application relationships, and design notes intended to make television and video-interface design reviews more systematic.

RFQ پەیوەندی
ADV7401BSTZ-110 10-Bit Video Decoder | Analog Devices
ADV7401BSTZ-110

ADV7401BSTZ-110 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7401BSTZ-110 is a 10-bit, single-chip multiformat SDTV/HDTV video decoder and RGB graphics digitizer that converts PAL, NTSC, and SECAM composite or S-video signals into digital ITU-R BT.656 data. The device combines four ADC channels with a 100-lead LQFP package measuring 14 mm by 14 mm, making it suitable for professional video processing, broadcast equipment, security systems, and legacy analog-video capture platforms. A video decoder is an interface IC that converts analog video into a digital pixel stream that can be processed, stored, or transmitted by digital electronics. Within the broader semiconductor hierarchy, the ADV7401 belongs to the video-processing IC family, connects to the interface-IC category, and ultimately supports the wider digital-video ecosystem. Its standardized BT.656 output simplifies connection to frame buffers, video processors, capture controllers, and display or broadcast equipment. The principal characteristics include 10-bit video digitization, four ADC channels, multiformat analog-video decoding, and digital ITU-R BT.656 output. According to the Analog Devices product page, the decoder supports PAL, NTSC, and SECAM inputs supplied through composite or S-video interfaces. The -110 ordering suffix identifies the specific 110 MHz-capable device variant, while the BSTZ package designation corresponds to the 100-lead LQFP configuration. Technically, the ADV7401 combines analog-to-digital conversion with decoding and graphics digitization in one package. Its four ADC channels allow multiple analog-video sources to be captured under appropriate input configurations. The resulting 10-bit pixel data is delivered digitally, avoiding repeated conversion between analog video and digital processing domains. This integration can reduce board area and simplify synchronization when the decoder is placed ahead of an FPGA, ASIC, DSP, or dedicated video processor. Typical uses include SDTV and HDTV decoding inside professional monitors, broadcast test equipment, video walls, surveillance recorders, industrial inspection systems, and legacy multimedia appliances. PAL, NTSC, and SECAM support makes it especially relevant to globally deployed equipment that must accept several regional television formats. The digital output can also feed later-stage color processing, scaling, enhancement, encoding, or frame capture. Designers should use the manufacturer datasheet pin-description table when assigning PCB tracks and should treat the analog input network, synchronization signals, digital output timing, supply rails, and exposed thermal considerations as an integrated signal-integrity problem. Component values, supported synchronization modes, electrical limits, and initialization requirements should be taken directly from the manufacturer documentation for the exact ADV7401BSTZ-110 ordering code. This page combines the manufacturer product description, distributor package identification, application guidance, and engineering-focused design considerations for engineers evaluating the ADV7401BSTZ-110. It also distinguishes the decoder from related Analog Devices video-conversion families and explains when a same-footprint replacement is appropriate without treating functionally similar devices as automatic substitutes.

RFQ پەیوەندی
ADV7401KSTZ-140 - 10-Bit Video Decoder | Analog Devices
ADV7401KSTZ-140

ADV7401KSTZ-140 - 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7401KSTZ-140 is a 10-bit, single-chip multiformat SDTV/HDTV video decoder and RGB graphics digitizer with 100-lead LQFP packaging. It converts PAL, NTSC, and SECAM composite or S-video signals into the digital ITU-R BT.656 format, while the 1.8 V digital and 3.3 V analog supply arrangement supports integration with contemporary video processing logic. A video decoder is an interface IC that converts legacy analog television waveforms into digital pixels suitable for capture, scaling, processing, encoding, or display. Within the broader semiconductor hierarchy, the ADV7401 belongs to video processing ICs, interface ICs, and multimedia signal-processing semiconductors. Its integrated analog front end and digital output reduce the need for separate decoders when equipment must accept multiple regional television standards. The ADV7401 supports 10-bit digitization for PAL, NTSC, and SECAM, with composite and S-video inputs identified in the manufacturer product information. Serial digital output follows the ITU-R BT.656 interface format. The device also incorporates on-screen display and teletext support, as identified for the ADV7401KSTZ-140, along with RGB graphics digitization. These features make it applicable to broadcast equipment, video capture systems, industrial monitoring panels, and legacy-source conversion equipment. The -140 orderable variant uses a 100-lead, 14 mm by 14 mm low-profile flat package and is specified for an industrial temperature range of 0°C to 70°C. The 100-pin interface exposes the analog video inputs, digital processing connections, control signals, synchronization outputs, and supply rails. That extensive mixed-signal pinout requires a carefully partitioned PCB with short analog paths, controlled return currents, and separate routing for digital output and clock signals. Typical designs place the ADV7401 between an analog video connector and an FPGA, DSP, image processor, or digital video encoder. In a PAL/NTSC capture system, the decoder digitizes the incoming composite signal and presents synchronized 10-bit pixels over ITU-R BT.656 for downstream processing. In broadcast or professional monitoring equipment, its multistandard decoding, OSD, and teletext capabilities reduce the number of separate video subsystem blocks while preserving a common digital processing interface. The primary design consideration is mixed-signal implementation. Route composite and S-video inputs away from high-speed digital clocks, use an uninterrupted ground plane, place bypass capacitors at the supply pins, and follow the pin-description table in the manufacturer datasheet when assigning connector and processor connections. Confirm supported resolution, synchronization mode, and output timing against the system video standard before releasing the PCB layout. This product page consolidates the multiformat decoding capability, package details, practical interface guidance, qualified drop-in comparisons, and sourcing information needed to evaluate the ADV7401KSTZ-140 before integrating it into an SDTV, HDTV, broadcast, capture, or industrial video design.

RFQ پەیوەندی
ADV7403BSTZ-110 - 12-Bit 110 MHz Video Decoder | Analog Devices
ADV7403BSTZ-110

ADV7403BSTZ-110 - 12-Bit 110 MHz Video Decoder | Analog Devices

The Analog Devices ADV7403BSTZ-110 is a 12-bit, integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer with a 110 MHz sampling speed, support for PAL, NTSC, and SECAM composite or S-Video inputs, and serial ITU-R BT.656 output. The device is supplied in a 100-lead, 14 mm × 14 mm RoHS-compliant LQFP package and operates over the industrial temperature range of -40°C to +85°C. A video decoder is an interface IC that converts legacy analog video signals into a digital pixel stream for processing, display, capture, or transmission. The ADV7403 belongs to the broader video-processing IC hierarchy and combines four noise-shaped 12-bit ADCs, a 12-channel analog input multiplexer, analog video decoding, and digital output formatting in one package. Its BT.656 output provides a conventional parallel digital-video interface for downstream processors and display controllers. Key capabilities include 12-bit video digitization, four noise-shaped video ADCs, a 12-channel analog input multiplexer, SCART fast-blank support, and multiformat decoding for PAL, NTSC, and SECAM. The -110 speed grade supports operation to 110 MHz, while a separate 140 MHz grade is identified as ADV7403KST-140. These distinctions are important because sampling speed affects supported signal bandwidth and timing margin. The integrated conversion path reduces the number of discrete analog-to-digital and decoding functions required for legacy video ingestion. Composite and S-Video sources can be selected through the analog input multiplexer and converted into digital ITU-R BT.656 data. Digital pixel data may then be routed to an FPGA, processor, scaler, capture controller, or video processor without requiring a separate external video decoder for these supported formats. Typical uses include industrial video inspection, professional broadcast and surveillance equipment, video capture cards, legacy media conversion, test and measurement systems, and embedded video-processing equipment. The device is most appropriate where PAL, NTSC, or SECAM analog sources must become digital video while preserving a defined 12-bit conversion path and standardized serial output. Layout should follow the manufacturer's pin-description table and recommended decoupling arrangement because this 100-pin mixed-signal LQFP contains high-speed digital outputs alongside sensitive analog inputs. Keep analog and digital return paths controlled, place bypass capacitors close to their supply pins, and treat the exposed analog and digital interfaces according to the pin table rather than assuming identical routing requirements. This page combines manufacturer-device facts, lifecycle status, source links, parameter comparisons, and practical replacement guidance. It also distinguishes the 110 MHz grade from the 140 MHz ADV7403KST-140 option and identifies the limitations of using an ADV7401 or ADV7510 as a direct drop-in replacement.

RFQ پەیوەندی
ADV7604BBCZ-5P - 12-Bit Multiformat Video Decoder | Analog Devices
ADV7604BBCZ-5P

ADV7604BBCZ-5P - 12-Bit Multiformat Video Decoder | Analog Devices

Analog Devices ADV7604BBCZ-5P is a 12-bit, 170 MHz multiformat video decoder and graphics digitizer with an integrated 4:1 multiplexed HDMI 1.3a receiver, supplied in a 260-CSPBGA package measuring 15 mm by 15 mm. It combines three analog video ADCs, digital video processing, analog video output, and HDMI receiver functions in one high-performance video interface IC. A video decoder is an interface IC that converts incoming composite, component, or digital video signals into a digital representation suitable for an FPGA, SoC, display controller, or image-processing pipeline. The ADV7604 belongs to the broader video interface IC and graphics digitizer hierarchy, where it bridges multiple analog and digital video standards while preserving 12-bit quantization, deep color, and high pixel-clock capability. Its integration reduces the number of separate ADC, scaler, and interface devices required in professional video equipment. The device supports three 12-bit ADCs, a 170 MHz sampling capability, and HDMI 1.3a reception through a 4:1 multiplexer. According to the Analog Devices ADV7604 product page, the main component processor handles decoded video signals, while the integrated HDMI receiver broadens compatibility with digital audiovisual sources. I2C control provides a serial programming path for configuring the device, and IEC 90658 appears in the distributor classification for the target package. Technical implementation requires careful treatment of analog and digital power, clocking, grounding, and high-speed signal routing. The 260-CSPBGA package is a fine-pitch surface-mount device requiring a multilayer PCB, controlled escape routing, and careful via placement beneath the device. Because the part supports both analog and digital video paths, synchronization between the analog ADCs, HDMI receiver, processor, and external digital interface is central to maintaining signal integrity. Typical uses include professional broadcast video conversion, video-wall controllers, digital signage, industrial inspection systems, security cameras, multimedia processors, and FPGA-based image acquisition. The integrated multiformat receiver is useful when equipment must accept legacy analog video while also supporting digital HDMI sources through a common processing pipeline. The main PCB tradeoff is complexity: integrating three ADCs and an HDMI receiver reduces external component count, but the 260-ball BGA demands fine-pitch manufacturing and careful thermal planning. Follow the manufacturer pin-description table and recommended decoupling network when assigning PCB tracks. Review the complete power-up sequence and clock requirements before enabling all receiver and processing paths simultaneously. This page organizes the verified ADV7604BBCZ-5P package, interface, and configuration information alongside practical implementation guidance, sourcing questions, and a conservative drop-in assessment. It is intended to help engineers identify the correct part, plan the board, and determine whether an alternate ordering code or genuinely pin-compatible device is appropriate.

RFQ پەیوەندی
ADV7610BBCZ-P-RL - 165 MHz HDMI Receiver | Analog Devices
ADV7610BBCZ-P-RL

ADV7610BBCZ-P-RL - 165 MHz HDMI Receiver | Analog Devices

Analog Devices ADV7610BBCZ-P-RL is a low-power, single-input HDMI-capable receiver with a 165 MHz maximum clock, support for video formats up to UXGA at 60 Hz and 8-bit color, and a 76-CSPBGA 6 mm × 6 mm package. The professional no-HDCP variant also integrates a CEC controller with capability discovery and control support and uses an I2C control interface. An HDMI receiver is an interface IC that recovers digital audio and video from an HDMI source and converts the recovered video into a parallel digital interface suitable for display or video-processing hardware. In the product hierarchy, the ADV7610BBCZ-P-RL belongs to the HDMI receiver class, interface IC category, and broader semiconductor ecosystem. Its single-input architecture simplifies source selection while providing the clocking and signal-conditioning functions required between a connector and the downstream video system. Principal features include a 165 MHz operating clock, UXGA 60 Hz video support at 8 bits per color, integrated HDMI reception, I2C configuration, and CEC capability. The operating temperature range of −40°C to +85°C supports industrial equipment as well as consumer and professional AV products. The low-power architecture is particularly useful when the receiver operates continuously inside a display, projector, set-top box, or video-processing enclosure. The receiver separates the physical-layer and protocol handling needed for an HDMI link from downstream pixel processing. Its 76-CSPBGA package minimizes board area, but its fine pitch and large ball count require careful PCB layout, controlled impedance routing, and assembly processes capable of handling the package geometry. The I2C register interface allows firmware to configure detection, equalization, clocking, input format, and output behavior according to the connected source. Typical applications include HDMI input for professional video equipment, industrial display controllers, projectors, video walls, conferencing endpoints, and multimedia receivers. Its UXGA 60 Hz capability is useful when the downstream display pipeline must preserve 1920 × 1200 video at a 60 Hz refresh rate. The professional no-HDCP configuration should be selected only when protected content is not required. When laying out the board, treat the HDMI input, reference clock, power rails, and ground-return structure as a coordinated high-speed system. Follow the pin-description table and recommended-layout guidance in the manufacturer datasheet for every ball assignment. Avoid improvising an HDMI front end from generic routing conventions, because connector launch geometry, trace impedance, return paths, and decoupling placement materially affect link margin. This product page consolidates the manufacturer capabilities, exact package identity, interface characteristics, drop-in variants, application fit, and practical implementation considerations into an engineering-focused selection reference. Use the Request a Quote form for current commercial availability, lead time, and order handling.

RFQ پەیوەندی
ADV7682WBSWZ-RL - Dual HDMI/APIX2 Receiver | Analog Devices
ADV7682WBSWZ-RL

ADV7682WBSWZ-RL - Dual HDMI/APIX2 Receiver | Analog Devices

Analog Devices ADV7682WBSWZ-RL is a dual-input HDMI and single-input ITU-R BT.656 receiver with an APIX2 transmitter, designed for professional audiovisual, automotive, and industrial video systems. The device combines two HDMI receiver inputs, one BT.656 input path, and APIX2 output in a 100-pin LQFP exposed-pad package measuring 14 mm by 14 mm. An HDMI receiver is an interface IC that accepts digital audio and video signals from sources such as computers, cameras, and media processors. The ADV7682 combines that receiver function with an APIX2 transmitter, allowing received video to be redistributed through APIX-compatible links. APIX2 compatibility extends interoperability with Inova Semiconductors APIX and APIX2 receiver technology, making the device relevant to professional broadcast, surveillance, and vehicle infotainment equipment. The ADV7682 provides two HDMI inputs and a single ITU-R BT.656 input. This combination supports systems that need to select between computer or camera sources and digital-video equipment operating with parallel BT.656 interfaces. Its APIX2 transmitter provides a common output path for downstream transmission, while the integrated receiver architecture can simplify chassis design compared with separate receiver and transmitter assemblies. The automotive ordering option identified for ADV7682WBSWZ-RL supports AEC-Q100-qualified applications. Its exposed-pad LQFP construction provides a large thermal and electrical connection to the PCB, which is important for high-speed interface devices whose switching activity and power dissipation must be controlled. Correct high-speed layout, solid reference-plane continuity, and careful supply decoupling remain central to reliable operation. Typical applications include automotive infotainment displays, professional video monitors, camera-viewing systems, video walls, broadcast production equipment, and industrial control consoles. In an automotive head unit, the receiver can accept HDMI content from a navigation or media source and provide an APIX2 link to a display or additional vehicle controller. In broadcast infrastructure, APIX2 compatibility supports standardized point-to-point and multicast audio/video networking. Designers should follow the Analog Devices ADV7682 manufacturer datasheet for the complete pinout, input electrical limits, supported video formats, reference-clock requirements, and exposed-pad land pattern. The 14 mm by 14 mm LQFP-EP footprint requires careful differential and high-speed routing, short return paths, and uninterrupted ground planes beneath and around the device. This product record combines the manufacturer’s interface description with distributor package information and application-specific engineering guidance. It also distinguishes the device from related ordering codes and unavailable pin-level parameters, helping engineers confirm package compatibility, thermal strategy, and signal-integrity requirements before committing a new PCB layout.

RFQ پەیوەندی