بەرهەمەکان (130+)

ADV7800BSTZ-150 10-Bit Video Decoder | Analog Devices
ADV7800BSTZ-150

ADV7800BSTZ-150 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7800BSTZ-150 is a 10-bit, single-chip multiformat 3D comb filter, video decoder, and graphics digitizer in a 176-lead LQFP package measuring 24 x 24 mm. It converts PAL, NTSC, and SECAM composite or S-Video inputs into digital ITU-R BT.656 video, combining analog input conditioning, decoding, filtering, and digitization in one device. The -150 ordering code identifies the specified manufacturer configuration, while the supported video standards and digital output are the primary functional characteristics. A video decoder is an interface IC that converts analog television signals into digital pixel data suitable for display, capture, conversion, or embedded processing. Within the signal-chain hierarchy, the ADV7800BSTZ-150 acts as an analog-to-video interface between composite or S-Video sources and digital video-processing logic. Its integrated 3D comb filter and graphics digitizer reduce the number of separate signal-conditioning blocks required in legacy video equipment. The principal feature set includes 10-bit video processing, support for PAL, NTSC, and SECAM standards, conversion from composite or S-Video inputs, digital ITU-R BT.656 output, and integrated 3D comb filtering. These capabilities make the device appropriate for professional video conversion, broadcast-related equipment, video test systems, industrial imaging, and legacy audiovisual equipment requiring standardized digital video output. The wide 176-lead package supports extensive analog, digital, clock, power, and configuration connectivity. The component integrates several signal-processing stages in one package. Composite input decoding and S-Video handling precede digital pixel generation, while the 3D comb filter separates luminance and chrominance information and reduces cross-color artifacts. The graphics digitizer produces digital video data compliant with ITU-R BT.656, allowing the output to connect directly to digital video processors, scalers, capture systems, or display controllers when their electrical interfaces are compatible. Typical applications include PAL, NTSC, and SECAM video conversion; SDTV and HDTV-related interface equipment; broadcast monitoring; audiovisual test and measurement; digital video capture; and industrial systems that still accept legacy analog television formats. The manufacturer datasheet should be consulted for clocking, register programming, synchronization standards, supply requirements, analog input configuration, and exact digital-interface details before finalizing a board design. PCB implementation requires careful attention to analog and digital signal separation, clock routing, grounding, and decoupling around this large mixed-signal IC. Use the manufacturer’s recommended pin assignments and reference layouts, preserve continuous return paths beneath the package where applicable, and validate the complete composite or S-Video front end for noise, impedance matching, and connector isolation. This page provides a focused product view that combines the identified video functions, package information, purchasing workflow, practical design guidance, and a documented comparison with closely related ADV7800 and ADV7802 devices. It is intended to help engineers determine functional suitability before completing pin-level and timing validation with the official device documentation.

RFQ پەیوەندی
DLPC3479CZEZ - DLP Controller for DLP4710LC | Texas Instruments
DLPC3479CZEZ

DLPC3479CZEZ - DLP Controller for DLP4710LC | Texas Instruments

The Texas Instruments DLPC3479CZEZ is a DLP display and light controller for the DLP4710LC (0.47-inch 1080p) digital micromirror device (DMD), supplied in a 201-ball NFBGA (ZEZ) package measuring 13 mm x 13 mm. It provides high-speed, precision interface and steering between system electronics and the DMD for video display and light control applications, including 2xDLPC3479 dual-controller configurations. The device operates over the industrial -30C to +85C temperature range and is qualified for display and projection designs requiring pixel-accurate DMD control. A DLP controller (Digital Light Projection controller) is a mixed-signal ASIC that orchestrates illumination timing, micromirror bit-planes, video processing, and host command interface for a DLP digital micromirror device (DMD). DLP controllers sit at the apex of the DLP chipset hierarchy (DLP controller -> DMD driver -> DMD -> optical engine -> display system), and are required to bring up, sequence, and continuously refresh the MEMS micromirror array while maintaining pixel-level color and brightness accuracy across frame rates. Key features include support for the DLP4710LC 0.47-inch 1080p DMD, an integrated ARM Cortex host-side interface, integrated illumination driver interface, and high-speed DMD data path with deterministic latency. The device supports video display and light steering modes commonly used in industrial projection, 3D printing, 3D machine vision, and spectroscopy, while the 201-ball NFBGA provides the routing density required for the parallel DMD data bus at full HD resolution. The DLPC3479 uses a programmable microcontroller subsystem to manage DMD load, micromirror reset sequences, LED/laser light source timing, and host command protocol over I2C or SPI. The 2xDLPC3479 dual-controller topology (referenced in the TI datasheet) supports higher resolution or higher brightness configurations by pairing two controllers with a single DMD, enabling synchronized bit-plane generation for light control applications such as structured light, mask-less lithography, and exposure systems. Typical applications include 1080p portable projectors, industrial inspection cameras, structured-light 3D scanners, 3D printers, head-up displays, and medical imaging systems. The DLP4710LC chipset is also widely used in AR glasses, near-eye displays, and head-mounted displays where the small 0.47-inch panel format and DLP's high fill factor enable compact optical engines. When designing with this device, ensure the PCB layout follows the TI NFBGA-201 escape pattern and that the DMD high-speed data bus is length-matched per the DLPC3479 datasheet guidelines. The DLPC3479 must be paired with the DLP4710LC DMD; it is not a generic DLP controller and cannot be substituted with DLPC34xx controllers intended for other DMDs without re-validating the full chipset configuration and firmware load. This page synthesizes the TI DLPC3479 datasheet, current DigiKey/Mouser pricing as of 2026-10-07, drop-in alternatives within the DLP4710LC family, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
DS90C383MTD - 3.3V 24-Bit LVDS FPD-Link Transmitter | Texas Instruments
DS90C383MTD

DS90C383MTD - 3.3V 24-Bit LVDS FPD-Link Transmitter | Texas Instruments

The Texas Instruments DS90C383MTD is a 3.3 V programmable LVDS transmitter for 24-bit flat-panel display links, operating to 65 MHz and supplied in a 56-pin TSSOP package. The device is designed for point-to-point FPD-Link transmission between graphics engines and flat-panel display timing controllers, with programmable transmitter output, selectable strobe timing, and a single 3.3 V supply. According to the verified TI product and datasheet results, the DS90C383 family supports 20 MHz to 65 MHz shift-clock operation and is intended for XGA, SXGA, and related digital display interfaces. An LVDS FPD-Link transmitter is a specialized interface IC that converts low-voltage digital pixel data into a differential, low-voltage signaling stream suitable for reliable transfer over a cable or PCB trace. Its role in the display hierarchy is serializer interface: graphics data and synchronization signals enter the device, and differential LVDS outputs leave toward a receiver or display timing controller. This reduces signal count compared with parallel display signaling and helps support longer interconnects with low electromagnetic interference. The verified TI description identifies the DS90C383 as a 3.3 V programmable LVDS transmitter with a 24-bit FPD-Link and a 65 MHz maximum clock. The manufacturer datasheet search result also identifies DS90C383MTD as the 56-pin TSSOP ordering option and references DS90C383SLC as a separate ordering option. The device is associated with a chipset approach that pairs the transmitter with a compatible LVDS receiver. Reported feature material identifies programmable transmitter operation, selectable rising- or falling-edge strobe behavior, single-pixel-per-clock operation, XGA-ready support, and low-power-down consumption, although several detailed electrical limits are not included in the supplied verification text. The primary engineering role of the DS90C383MTD is therefore to serialize a parallel 24-bit display stream onto a small number of differential LVDS lanes while preserving clocking and data arrangement for a remote display receiver. Its 65 MHz capability corresponds to the maximum pixel-clock performance stated by TI and makes it appropriate for established small-panel and industrial display systems rather than current high-resolution high-refresh display links. Typical deployments include XGA-compatible flat-panel monitors, industrial HMI panels, embedded control displays, test equipment, and instrumentation. The transmitter should be paired with a receiver that supports the same FPD-Link data rate, lane count, clock polarity, and synchronization scheme. Designers must also verify connector and cable impedance, AC coupling where required by the link implementation, trace length matching, and the receiver's input capability. The key design consideration is that 65 MHz is the stated upper clock range, not a universal guarantee for every panel timing combination. Pixel-clock rate, blanking intervals, lane count, electrical loading, and receiver tolerance determine whether a particular display timing is supported. This page synthesizes the verified manufacturer and distributor information, identifies the practical replacement constraints, and separates documented facts from parameters that still require confirmation from the full manufacturer datasheet.

RFQ پەیوەندی
DS90CF383AMTD - 65MHz 24-Bit LVDS Transmitter | TI
DS90CF383AMTD

DS90CF383AMTD - 65MHz 24-Bit LVDS Transmitter | TI

Texas Instruments DS90CF383AMTD is a 3.3 V programmable LVDS transmitter for 24-bit flat panel display links, operating at a maximum transmit clock frequency of 65 MHz and packaged in a 56-pin TSSOP. It accepts 28 CMOS/TTL data bits and converts them into four differential LVDS data streams, while a fifth differential link carries the phase-locked transmit clock. A flat-panel-display transmitter is an interface IC that converts parallel digital pixels into a low-voltage differential signaling link suitable for transmission between a graphics controller and a display. In the product hierarchy, the DS90CF383AMTD belongs to the LVDS interface family, which forms part of display interface ICs and broader digital signal-processing semiconductors. Its differential outputs reduce signal-integrity and EMI challenges compared with single-ended parallel routing over longer cable or cable-like interconnects. The principal device features include four LVDS data outputs, one differential clock output, a 3 V to 3.6 V supply range, and support for a 65 MHz transmit clock. Every transmit-clock cycle samples 28 input bits, allowing 24 RGB data bits and three control bits to be transferred. The programmable architecture supports configured flat-panel interfaces while maintaining a fixed parallel input side and standardized LVDS output side. Technically, the transmitter combines a parallel CMOS/TTL input interface with a phase-locked clocking and differential-output architecture. The clock is transmitted in parallel with the pixel data so the receiving endpoint can recover a timing reference from the same physical link. Four data lanes each carry seven transmitted bits in the described operating format, while the separate clock lane supports synchronization across the complete display word. Typical applications include digital flat-panel monitors, industrial human-machine-interface panels, point-of-sale displays, medical imaging terminals, automotive navigation displays, and other graphics systems that transmit 24-bit RGB data over an LVDS FPD-Link connection. The device is most appropriate where the transmitter endpoint operates from 3.3 V and the receiving endpoint supports the corresponding LVDS clock and data interface. PCB implementation requires careful treatment of the 56-pin TSSOP and its differential outputs. Place power-supply decoupling capacitors close to the supply pins, maintain continuous reference planes beneath the device, and route each differential pair as a tightly coupled pair over a controlled impedance path. Decoupling and clock-quality evaluation should be performed on the assembled PCB because package parasitics and trace geometry affect signal integrity. This product page combines the manufacturer’s device description with practical application guidance, interface-selection context, and a traceable comparison framework. It focuses on the DS90CF383AMTD’s verified architecture and package characteristics rather than introducing functionally similar parts that have not been established as pin-to-pin drop-in replacements.

RFQ پەیوەندی
FT801Q-R - EVE Embedded Video Engine, 48-VQFN | Bridgetek
FT801Q-R

FT801Q-R - EVE Embedded Video Engine, 48-VQFN | Bridgetek

The Bridgetek FT801Q-R is an Embedded Video Engine (EVE) graphic controller IC housed in a 48-pin VQFN (7x7 mm) package, supplied on 2500-piece tape-and-reel. It targets embedded Human-Machine Interface (HMI) applications by integrating display, audio, and touch control into a single chip, operating from a 2.97V to 3.63V supply with a 30 MHz internal clock. An EVE (Embedded Video Engine) is a class of graphic controller that offloads display list rendering, widget drawing, and touch sensing from the host microcontroller, freeing the MCU to run application logic. EVE sits in the hierarchy: graphic controller -> display driver IC -> video processing -> power management IC -> semiconductor. FTDI/Bridgetek pioneered this category with the FT800 and extended it through the FT810/FT811/FT812/FT813 family, of which FT801 is the cost-optimized variant. Key features include an object-oriented widget architecture supporting resistive touch sensing, integrated audio output, 1/2/4/8-bit RGB display interface up to HVGA/WQVGA resolution, and configurable host interface (SPI up to 30 MHz or I2C up to 3.4 MHz). The 48-VQFN package exposes all digital I/O, RGB bus, audio PWM, and the MODE pin that selects SPI (pull-down) or I2C (pull-up). Technically, the FT801 builds on the FT800 silicon with an enhanced command set while retaining register-level compatibility. It uses an internal 30 MHz oscillator, generates all timing for the LCD panel, performs JPEG decoding in hardware, and computes touch coordinates internally. Power sequencing is straightforward with single 3.3V rail. Typical applications include home appliances, security system keypads, medical device front panels, teleconferencing interfaces, industrial control HMIs, and smart-home thermostats. The FT801's low host-overhead makes it ideal for any MCU (including 8-bit parts) that needs a modern graphical UI. When designing, keep RGB traces short (under 50 mm) and matched, place a 100 nF decoupling cap within 3 mm of every supply pin, and reserve a footprint for the touch-panel connector. The MODE pin must be biased with a 10 kohm resistor since leaving it floating can cause intermittent SPI/I2C mis-selection. This page synthesizes cross-distributor pricing, drop-in same-package alternatives, and practical layout notes that go beyond the manufacturer datasheet narrative.

RFQ پەیوەندی
FT812Q-T - EVE2 Video Controller IC, SPI, 56-QFN | Bridgetek
FT812Q-T

FT812Q-T - EVE2 Video Controller IC, SPI, 56-QFN | Bridgetek

The Bridgetek FT812Q-T is a second-generation Embedded Video Engine (EVE2) controller IC integrating graphics, audio, and resistive touch control into a single chip, packaged in a 56-pin VQFN-EP (8x8 mm). It targets high-resolution Human-Machine Interface (HMI) applications, featuring a 24-bit RGB parallel display interface and an SPI host interface operating up to 100 Mbps. An Embedded Video Engine (EVE) is a system-on-chip graphics controller that offloads rendering, widget composition, audio playback, and touch scanning from the host MCU. EVE controllers occupy a unique position in the embedded display hierarchy - sitting between simple character LCDs and full graphics SoCs - delivering high-quality HMIs without requiring a high-performance host processor or external frame buffer memory. Key features of the FT812Q-T include a built-in graphics engine supporting jpeg decoding and ASTC texture compression, a 1 MByte graphics RAM, integrated PWM audio output, and a resistive touch screen controller with hardware scanning. It supports display resolutions up to 1024x768 (HVGA+) via its programmable 24-bit RGB interface, with display sizes configurable up to 512x512 for the FT81x family. The device operates from a single 3.3V supply (2.97V to 3.63V) and is specified for the -40C to +85C industrial temperature range. From an architecture standpoint, the FT812Q-T combines an embedded graphics accelerator, a configurable display controller, audio DAC with class-D amplifier interface, and a touch engine into a single BGA-equivalent VQFN package. The 56-QFN-EP exposed pad provides thermal relief and a low-impedance ground return. Communication occurs through SPI at speeds up to 100 Mbps, allowing the host MCU to issue high-level display-list commands rather than pixel-by-pixel updates, dramatically reducing MCU firmware complexity and SPI bus traffic. Typical applications include point-of-sale terminals, industrial control panels, medical device HMIs, security systems, teleconferencing equipment, smart home control panels, and portable instrumentation displays. The wide operating voltage and temperature ranges suit industrial, medical, and security applications requiring reliable operation in harsh environments. When designing with the FT812Q-T, pay attention to PCB layout: route SPI traces as short 50-ohm impedance-controlled lines, place the 0.1uF decoupling capacitor within 3mm of the supply pin, and solder the exposed pad to a continuous ground plane for thermal dissipation and low-noise digital return paths. The EVE2 command protocol requires the host MCU firmware library from Bridgetek for proper display-list construction. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - including a 5-alternative comparison matrix from Bridgetek's FT81x family and cross-brand VQFN-56 competitors, plus an honest application-by-application fit analysis.

RFQ پەیوەندی
ISL59603IRZ-T7 - Adaptive Composite Video Equalizer | Renesas
ISL59603IRZ-T7

ISL59603IRZ-T7 - Adaptive Composite Video Equalizer | Renesas

The Renesas Electronics ISL59603IRZ-T7 is a single-channel MegaQ adaptive composite-video equalizer designed to compensate automatically for long Cat 5/6 or RG-59 cable runs, in a 20-QFN (4 x 4 mm) package. According to the verified distributor listing, it supports serial NTSC and PAL video equalization and is fully adaptive to cable lengths up to 1 mile, or 1600 m. A video equalizer compensates for amplitude loss, phase distortion, and frequency-dependent degradation introduced by coaxial or twisted-pair transmission media. The MegaQ family belongs to the broader signal-conditioning hierarchy: composite-video processing, analog equalization, video signal conditioning, and interface ICs. Automatic adaptation is especially useful in security installations, camera links, surveillance backbones, and professional video equipment where long cables would otherwise require manual preset adjustment. The verified product data identifies the ISL59603 as part of the ISL59601, ISL59602, ISL59603, ISL59604, and ISL59605 MegaQ family. These devices target progressively longer transmission distances: the family description states that the ISL59601 reaches 1000 feet, while the ISL59605 reaches 5300 feet. The ISL59603 position is specifically identified as the 1-mile, 1600 m version. This makes model selection distance-based rather than a generic package substitution. The ISL59603IRZ-T7 is packaged in a 20-QFN, 4 x 4 mm surface-mount package. QFN construction supports compact PCB layouts while providing exposed thermal and electrical land patterns under the device. Exact pin functions, supply limits, gain settings, operating temperature, and RoHS or REACH status are not present in the supplied verified snippets, so those values are retained as [DATA_NEEDED] rather than inferred. Typical applications include long-distance composite-video surveillance camera transmission, CCTV monitor connections, security-control rooms, and CAT 5/6 or RG-59 cable links. The adaptive architecture removes the need for user interaction after installation, helping maintain usable video quality across variable cable lengths and losses. The key design consideration is to verify the complete cable, connector, source, and load chain before assuming that an equalizer alone will correct every image defect. Use the manufacturer datasheet for pin assignment, recommended application circuitry, decoupling, and video-level constraints before layout is released. This page combines verified distributor identification, manufacturer family positioning, practical application guidance, and component-replacement constraints that are not normally presented together on a basic distributor listing.

RFQ پەیوەندی
LMH1226RTWT - 12G UHD Dual-Output Reclocker | Texas Instruments
LMH1226RTWT

LMH1226RTWT - 12G UHD Dual-Output Reclocker | Texas Instruments

The Texas Instruments LMH1226RTWT is a low-power dual-output 12G UHD reclocker supporting SMPTE video rates up to 11.88 Gbps and 10 GbE video over IP, housed in a 24-pin WQFN (4x5 mm) package. Typical power consumption is 214 mW, dropping to 16 mW in the absence of an input signal. A reclocker is a signal-conditioning device in the serial-digital-video signal chain: it extracts the clock from a degraded incoming data stream and retransmits the data with a clean, jitter-free clock, effectively regenerating the signal. Reclockers sit within the broader hierarchy of video interface ICs under linear/video processing semiconductors, bridging cable equalizers and cable drivers in broadcast and professional AV equipment. Key features include support for SMPTE data rates up to 11.88 Gbps (12G-SDI), 10 Gigabit Ethernet over IP, DVB-ASI, and AES10 (MADI) protocols. An adaptive board-trace equalizer at input IN1 is SFF-8431 compatible and handles both SMPTE and 10 GbE rates. The dual output drivers provide programmable de-emphasis to compensate board trace losses at the outputs. The reclocker attenuates high-frequency jitter to deliver the best signal integrity for Ultra HD 4K/8K video transport. With typical power consumption of only 214 mW and 16 mW in signal-absent mode, it suits dense, power-sensitive broadcast designs. The device is configured through SPI, and its high input jitter tolerance allows operation with degraded or long-reach incoming signals. Typical applications include 12G-SDI broadcast cameras and switchers, UHD video routers, 4K/8K video-over-IP infrastructure, and signal distribution amplifiers in professional AV systems. A key design consideration: the LMH1226 is pin compatible with the LMH1219 (a 12G-UHD cable equalizer with integrated reclocker), allowing PCB footprint reuse when a design needs equalization ahead of the reclocker. This page synthesizes distributor pricing context, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
MAX456CPL+ - 8x8 Video Crosspoint Switch | Analog Devices
MAX456CPL+

MAX456CPL+ - 8x8 Video Crosspoint Switch | Analog Devices

Analog Devices MAX456CPL+ is a monolithic CMOS 8 x 8 video crosspoint switch with eight video inputs, eight outputs, 64 T-switches, and eight internal unity-gain-stable output buffers. It supports a 250 V/µs slew rate and is packaged in a 40-pin through-hole dual in-line package. The matrix can route any input to any output, or distribute one input to multiple outputs. A video crosspoint switch is an electronically controlled routing matrix used to select and distribute video signals without changing their amplitude. The MAX456 belongs to the broader analog switch and multiplexer hierarchy, combining eight input channels, eight output channels, digitally controlled switching, and buffered outputs. This integration reduces the number of discrete routing components required in professional video, broadcast, surveillance, and industrial imaging equipment. The controlled matrix contains 64 T-switches that connect eight video inputs to selected output channels. Each matrix output is connected to an internal high-speed buffer that provides 250 V/µs slew performance and unity-gain stability. The buffered architecture helps the device maintain predictable signal behavior when a source is assigned to one output or broadcast to several outputs. The MAX456 is implemented in monolithic CMOS technology, supporting a compact crosspoint function compared with a board populated from separate analog switches and buffer amplifiers. Digital control allows the routing matrix to be changed during operation, making the device useful where source selection, signal monitoring, or programmable distribution is required. The exact control-interface timing, supply range, and electrical limits are identified in the manufacturer datasheet. Typical applications include professional video switching, broadcast routing, security-camera distribution, video test equipment, industrial imaging, and multimedia systems. The eight independent input and output channels allow compact systems to centralize source selection while retaining buffered outputs for downstream displays, recorders, or transmission equipment. Designers should use the pin-description and control-interface tables in the manufacturer datasheet when assigning PCB traces. Decoupling and signal-return routing should be treated as high-speed analog layout considerations because the device combines digital control with buffered video signals. The through-hole package also requires adequate board spacing and mechanically sound interconnects compared with a surface-mount implementation. This product page consolidates the manufacturer architecture description, package information, routing use cases, and drop-in comparison information to support faster component selection. It also highlights design checks that are not obvious from a distributor catalog entry, including output-buffer behavior, fan-out considerations, and the distinction between confirmed replacements and merely similar devices.

RFQ پەیوەندی
PI3VST01UE - VGA HPD Signal Generator | MSOP-8 | Diodes
PI3VST01UE

PI3VST01UE - VGA HPD Signal Generator | MSOP-8 | Diodes

The Diodes Incorporated (formerly Pericom) PI3VST01UE is a single-channel VGA Hot Plug Detect (HPD) signal generator IC housed in an 8-pin MSOP (Mini Small Outline Package). The device generates a buffered HPD logic signal used in legacy VGA connectors, supporting DisplayPort-to-VGA adapters, docking stations, and monitor-side hot-plug detection circuits where a clean, low-jitter logic-level assertion is required. Key features include a wide 3.0 V to 5.5 V single-rail supply range, CMOS/TTL-compatible HPD output, low quiescent current draw suitable for always-on bias rails, and an integrated pull-up on the HPD output pin per the VESA-recommended 1 kohm impedance. The MSOP-8 surface-mount package is footprint-compatible with standard industry pinouts and supports automated PCB assembly. The PI3VST01UE is a specialized analog mixed-signal interface IC belonging to the analog switch / special-purpose switch family (also classifiable as a video interface switch). Within the broader component taxonomy it sits under interface ICs, video ICs sub-category, semiconductor -> integrated circuit -> analog mixed-signal IC -> HPD signal generator. Its function is to provide electrical buffering and level translation of the HPD logic signal that source devices use to detect cable presence on VGA/DisplayPort output chains. Typical applications include DisplayPort-to-VGA adapters, video docking stations, monitor-side cable-presence detection on VGA inputs, KVM switches that must expose HPD to a graphics source, and legacy graphics cards that lack a native HPD output stage. It is also used in industrial video distribution equipment where hot-plug events must be regenerated cleanly to avoid host GPU re-enumeration glitches. When designing with this device, observe standard ESD precautions on the VGA DDC/HPD lines and decouple VCC with at least a 0.1 uF ceramic capacitor placed within 5 mm of the supply pin. The exposed pad on the MSOP-8 should be soldered to the PCB ground plane for thermal performance and pin-1 reference accuracy. This page synthesizes distributor pricing (DigiKey, Mouser, Octopart), package-level cross-references, drop-in alternatives, and PCB-level design notes into a single reference that is not duplicated on the manufacturer datasheet.

RFQ پەیوەندی
PI7C9X9208SLFDE - 8-Ch Video Decoder Bridge | Diodes
PI7C9X9208SLFDE

PI7C9X9208SLFDE - 8-Ch Video Decoder Bridge | Diodes

Diodes Incorporated PI7C9X9208SLFDE is a PCIe eight-channel video and audio decoder bridge with an LQFP package. The verified distributor listings identify the device as an IC for PCIe eight-channel video/audio decoding and describe the package as LQFP; other distributor records identify a 128-LQFP package measuring 14 mm by 14 mm. The available verified data does not provide the complete electrical timing table, operating-voltage range, clock requirements, or pin-level definitions. A video decoder bridge is an interface IC that receives digital video streams and associated audio or control data, converts or routes those streams into a system-facing interface, and helps bridge legacy display or multimedia paths to PCIe-based host systems. In the product hierarchy, this component belongs to video processing and interface ICs, with PCIe connectivity as its host-facing transport. It is intended for systems requiring eight-channel video/audio decoding rather than a general-purpose display controller. The PI7C9X9208SLFDE is specifically associated with PCIe eight-channel video/audio decoder functionality. Its LFDE ordering suffix is supplied exactly as shown by the verified distributor records, while the package evidence identifies a 128-pin LQFP. The supplied sources do not state whether the part is currently active, whether it is obsolete, or whether a particular lifecycle designation applies. It also does not provide verified pricing, stock, lead time, or a complete set of electrical limits. Typical design use is an embedded video system, digital signage controller, video capture appliance, or PCIe expansion card where multiple decoded video/audio channels must be transferred through a PCIe interface. The decoder should be validated against the host PCIe topology, display timing, audio routing, reference clock, and board-level signal-integrity requirements. Because the verified data does not specify those details, engineers should consult the manufacturer datasheet before finalizing clocking, lane configuration, termination, or firmware assumptions. The most important design consideration is to avoid treating distributor search snippets as a substitute for the complete datasheet. In particular, verify the supported input formats, output interface, electrical timing, reset requirements, power rails, package drawing, exposed-pad treatment, and absolute maximum ratings. PCB layout should preserve high-speed signal return paths and provide the required decoupling and grounding according to the complete manufacturer documentation. This page consolidates verified distributor identity, package information, sourcing links, and the available cross-reference context. It intentionally distinguishes confirmed facts from unavailable specifications rather than filling engineering gaps with assumptions.

RFQ پەیوەندی
S1D13517F00A100 - SVGA LCD Controller with SDRAM | Epson
S1D13517F00A100

S1D13517F00A100 - SVGA LCD Controller with SDRAM | Epson

The Epson S1D13517F00A100 is an external SDRAM LCD graphics controller IC supplied in a 128-pin QFP15 (14x14 mm) surface-mount package, supporting SVGA-class panels with Picture-in-Picture (PinP) and alpha-blending (a-Blend) overlay functions. It operates from a 2.5 V to 3.3 V supply range (CORE/PLLVDD = 2.5 V, IOVDD = 3.3 V), and supports an 8/16-bit indirect host interface while delivering high-bandwidth access to an external SDRAM display buffer of up to 16 MB. A video processing IC (also called a display controller, LCD controller, or graphics controller) is a semiconductor device that sits between a host processor and a flat-panel display, taking the host's drawing commands and rendering them into a refresh buffer that the panel can scan out. Within the broader hierarchy, it belongs to display driver ICs > video processing ICs > interface ICs > integrated circuits, and it is the typical bridge between an embedded MPU and an SVGA-resolution TFT LCD. Key features include SVGA (800x600) maximum resolution support, integrated 2D BitBLT engine, hardware Picture-in-Picture window compositing, 8/16-bit indirect host bus interface, support for up to 16 MB external SDRAM, and an operating temperature range of -40 C to +85 C suitable for industrial environments. The QFP15 128-pin package exposes a wide parallel host bus, RGB/TTL panel interface, and SDRAM control signals in a single footprint. The architecture combines a 16-bit internal data path, dedicated 2D acceleration for block moves and fills, and programmable timing generators for the panel. Compared to software-only frame-buffer approaches, the S1D13517F00A100 offloads the host CPU from scanout and composition duties, freeing MPU cycles for application code. Typical applications include industrial HMIs, point-of-sale terminals, medical instrument displays, in-vehicle information panels, and office automation equipment where an MPU must drive an SVGA TFT without burning CPU cycles on screen refresh. The PinP and alpha-blend features also support security/surveillance overlays on top of a primary video source. When designing with this part, place the external SDRAM on short, impedance-matched traces to minimize access latency, and use a four-layer PCB with a continuous ground plane under the QFP package to control switching noise on the parallel host bus. A bulk decoupling capacitor (>= 10 uF) plus a 0.1 uF ceramic near each VDD pin is recommended. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the Epson product datasheet, giving engineers a faster path to BOM selection for SVGA TFT designs.

RFQ پەیوەندی
S1D13706F00 - QVGA LCD Controller, 80KB SRAM, 100-TQFP | Epson
S1D13706F00

S1D13706F00 - QVGA LCD Controller, 80KB SRAM, 100-TQFP | Epson

The Epson S1D13706F00 is a color/monochrome QVGA LCD graphics controller with an embedded 80 KB SRAM display buffer, housed in a 100-pin TQFP (14x14 mm) package. It supports a 320x240 resolution at up to 8 bpp, addressing the demands of embedded systems where board size and battery life are critical. The part targets low-cost, low-power single-chip TFT panel designs while remaining compatible with a wide variety of other panel types. A QVGA LCD controller is a specialized display driver IC that generates the timing signals, pixel data, and backlight control needed to drive a small-format LCD panel from a host processor. Within the broader hierarchy, the S1D13706F00 belongs to the LCD controller category, which sits under display drivers & controllers, a sub-family of interface ICs in the integrated circuits tree. It is commonly used in embedded designs where a discrete FPGA-based timing generator would be impractical. Key features include an embedded 80 KB SRAM frame buffer that eliminates the need for external video memory, support for both 8-bit and 16-bit host interfaces, hardware rotation (swivel view) of 90/180/270 degrees, and Picture-in-Picture (PinP) overlays for richer HMI presentations. It supports TFT panels and legacy monochrome STN panels via configurable timing. Power consumption is optimized for battery-powered applications. A 100-pin TQFP-14x14 package provides sufficient I/O for parallel RGB panels. Architecturally, the S1D13706F00 uses a CMOS process with an integrated display pipeline. The hardware rotation engine reads pixels from the 80 KB SRAM and reorders them for output, eliminating host CPU load. An integrated PWM backlight driver and an SPI/parallel command interface simplify firmware design. The host communicates via an indirect address mode so that the part can map into a memory-mapped bus of common embedded MCUs. Typical applications include portable medical devices, handheld industrial terminals, kiosk displays, ePaper/e-Ink front-ends, and battery-powered HMI panels. Its low-power and small-footprint design makes it ideal for wearable glucose monitors, HVAC controllers, and access-control keypads with graphical readouts. The integrated PinP is valuable in split-screen UIs. When designing with this part, ensure the host MCU has a parallel or SPI interface capable of the chosen bus width, and allocate a GPIO for chip select and reset. Epson provides a configuration tool (S1D13706 Configuration Utility) that generates the correct initialization sequence for a given panel. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for sourcing and design.

RFQ پەیوەندی
SAA7111AHZ/V4 - Enhanced Video Input Processor LQFP-64 | NXP
SAA7111AHZ/V4

SAA7111AHZ/V4 - Enhanced Video Input Processor LQFP-64 | NXP

The NXP Semiconductors SAA7111AHZ/V4 is a pure 3.3 V CMOS Enhanced Video Input Processor (EVIP) that integrates an analog front-end with a digital video decoder in a single 64-pin LQFP (10x10 mm, 1.4 mm profile) surface-mount package. It accepts CVBS or S-Video (Y/C) analog inputs from TV tuners, cameras, and VCRs, and decodes PAL, SECAM, and NTSC color formats into CCIR-601 compatible digital component values for downstream MPEG, JPEG, or graphics ASICs. An Enhanced Video Input Processor (EVIP) is a mixed-signal front-end IC that combines a multi-channel analog video preamplifier, anti-alias filtering, an ADC, and a digital chroma/luma processor. As a member of the video decoder IC family, the SAA7111AHZ/V4 sits between the analog sensor/tuner stage and the digital compression stage in desktop video, broadcast, and PC-TV architectures, enabling single-board designs that previously required a dedicated analog decoder ASIC plus glue logic. Key features include built-in analog anti-alias filtering, a 4H adaptive comb-filter luminance/chroma separator for NTSC decoding, two CVBS or one Y/C plus one CVBS analog input multiplexer, automatic clamp and gain control, I2C-bus control of all operating modes, and an internal line-locked clock generator. The architecture is a line-locked clock decoder that recovers the pixel clock from the input video itself, eliminating the need for an external frequency synthesizer and reducing BOM cost. Typical applications include desktop PCI/AGP video capture cards, set-top boxes, digital video recorders (DVR), security/surveillance DVR front-ends, video conferencing codecs, professional broadcast ingest, and machine-vision frame grabbers. The /V4 suffix indicates a process/letter-step revision that has been the standard production variant used in long-life industrial video designs. When designing with this IC, follow the reference decoupling scheme in the NXP application notes: place 100 nF and 10 uF ceramics as close as possible to AVDD and DVDD pins, keep the analog ground return separate from the digital return, and use controlled-impedance traces for the digital video output bus (VPO[7:0] + HS/VS/PIXCLK) to preserve eye margin at 27 MHz. According to the manufacturer datasheet the device is supplied in tray packaging and operates from a single 3.3 V supply, drawing approximately 70 mA in active decode. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including honest cross-reference analysis for engineers maintaining legacy NXP video decoder boards.

RFQ پەیوەندی
SI2161-D-GM - DVB-T Video Demodulator | Silicon Laboratories
SI2161-D-GM

SI2161-D-GM - DVB-T Video Demodulator | Silicon Laboratories

The Silicon Laboratories SI2161-D-GM is a standalone DVB-T digital television video demodulator IC with a 36-pin VFQFN exposed-pad surface-mount package. It provides GPIO and I2C control interfaces and is designed for tuner applications in which a DVB-T demodulator is paired with an upstream tuner or analog front end. The SI2161-D-GM is associated with the Si2170, Si2171, and Si2172 hybrid tuner family and is suitable for television reception equipment, USB tuner modules, set-top systems, and other DVB-T reception products. A video demodulator is an interface-processing semiconductor that recovers digital transport-stream information from a modulated RF signal. In the broader device hierarchy, the SI2161-D-GM belongs to the video IC and demodulator category within interface ICs and, more broadly, integrated circuits. Its role is to accept the output of a tuner or analog front end, perform the required DVB-T demodulation, and expose status or configuration information through a host-controlled interface. The principal package and feature parameters are a 36-VFQFN exposed-pad configuration, a nominal 5 mm by 6 mm body, a surface-mount mounting method, DVB-T demodulation, and GPIO plus I2C host connectivity. The exposed pad supports heat transfer from the IC to the PCB, which is important in compact tuner and television designs. The part is also identified as lead-free and RoHS compliant. Its operating temperature range, supply-voltage limits, clock requirements, sensitivity, and maximum input frequency require confirmation from the manufacturer datasheet before a production design is released. The SI2161-D-GM is a demodulator rather than a complete tuner. Its analog front end is intended to work with compatible tuner silicon, including the Si2170, Si2171, and Si2172 family identified in the product documentation. This division of responsibility allows the demodulator to be selected independently from the RF tuner while preserving a known system architecture. Integration with the selected front end, crystal or clock source, supplies, reset circuitry, and I2C host driver determines the final reception performance. Typical installations include DVB-T television sets, set-top boxes, PC-connected tuner sticks, portable television products, and integrated tuner modules. In each case, the SI2161-D-GM handles DVB-T signal recovery while an upstream RF section performs tuning and analog signal conditioning. The I2C interface allows a system processor to configure registers and monitor demodulator status, while GPIO provides hardware signaling for functions such as reset, lock indication, or interrupt handling where supported by the application configuration. PCB implementation should follow the manufacturer land pattern and exposed-pad layout exactly. Place the decoupling network and clock components close to their associated pins, provide an uninterrupted ground reference beneath the exposed pad, and route high-speed or sensitive signals away from switching-supply and digital-return paths. Confirm thermal performance at the maximum ambient temperature and account for heat flow through the exposed pad, copper planes, vias, and enclosure rather than relying on the package rating alone. This page organizes the SI2161-D-GM package information, interface details, application guidance, design notes, and verified drop-in alternatives for engineers evaluating the device for a DVB-T receiver. It also identifies the electrical and lifecycle information that must be confirmed against the manufacturer datasheet before schematic release, PCB construction, or production qualification.

RFQ پەیوەندی
SI2165-D-GM - DVB-T/C Demodulator IC | Skyworks Solutions
SI2165-D-GM

SI2165-D-GM - DVB-T/C Demodulator IC | Skyworks Solutions

Skyworks Solutions SI2165-D-GM is a compact standalone DVB-T/C digital television demodulator IC with two 12-bit ADCs, operating from standard IF near 36 MHz, low-IF, or zero-IF tuner outputs. The device uses an I2C or serial host interface and is housed in a 36-pin QFN exposed-pad surface-mount package measuring approximately 5 mm by 6 mm. A digital television demodulator is an interface IC that recovers MPEG transport-stream data from a tuner analog output. In the television signal chain, an RF tuner first selects a channel and produces an intermediate-frequency signal; the demodulator then performs symbol recovery and channel decoding. The Si2165 occupies the baseband stage between a compatible TV tuner and a host processor, simplifying terrestrial and cable receiver designs. The Si2165 supports DVB-T, DVB-T/C, and DVB-H-oriented reception identified by Skyworks for its product family. Its analog front end contains two 12-bit ADCs with wide dynamic range, allowing direct connection to standard-IF, low-IF, or zero-IF tuners. This flexibility lets designers reuse the demodulator across metal-can tuner packages, tuner modules, and conventional RF front-end arrangements. The device was designed to complement the Si2170, Si2171, and Si2172 hybrid tuner families. Because its input architecture supports both approximately 36 MHz standard IF and low-IF or zero-IF signals, system partitioning can change without changing the downstream demodulator. The I2C and serial control paths provide host access to status, tuning-related information, and transport-stream configuration functions. Typical uses include free-to-air and pay-TV set-top boxes, integrated digital television receivers, PC-TV cards, portable media products, DVD and HDD personal video recorders, and cable or terrestrial television equipment. The compact exposed-pad package supports compact receiver hardware while its dual ADC architecture accommodates multiple tuner output styles. PCB implementation should prioritize short, controlled routing between the tuner and analog inputs, solid grounding under the exposed pad, and clean separation between sensitive RF-related traces and digital host-interface signals. Follow the manufacturer datasheet for the exact pin assignments, recommended decoupling network, clock requirements, signal-integrity limits, and exposed-pad land pattern rather than inferring connections from the general application description. This product page combines the Si2165 functional description with package, interface, compliance, and replacement information, plus practical guidance for evaluating the device in terrestrial television, cable, set-top box, and tuner-interface designs. It also distinguishes true pin-compatible options from related devices that cannot be installed on the same PCB footprint without redesign.

RFQ پەیوەندی
SN65DP159RGZT - 6-Gbps HDMI 2.0 Retimer | Texas Instruments
SN65DP159RGZT

SN65DP159RGZT - 6-Gbps HDMI 2.0 Retimer | Texas Instruments

The Texas Instruments SN65DP159RGZT is a 6-Gbps AC-coupled TMDS-to-HDMI level-shifter retimer IC in a 48-pin VQFN (RGZ 7x7 mm) package. It bridges DisplayPort dual-mode (DP++ 1.1) outputs to HDMI 2.0b sinks at data rates up to 6 Gbps per lane, with operating temperature rated from -40C to +85C. The retimer restores signal integrity across lossy cables and bandwidth-limited PCB traces. What is an HDMI retimer? An HDMI retimer (also called a signal conditioner or redriver-with-clock) is a mixed-signal interface IC that receives a degraded TMDS (Transition-Minimized Differential Signaling) stream, recovers its embedded clock, applies equalization and de-emphasis, and re-transmits a clean TMDS signal. Retimers sit in the signal chain hierarchy between TMDS redrivers (which only compensate channel loss) and full HDMI2.1 protocol converters (FRL). Compared with simple redrivers, retimers reduce both ISI jitter and random jitter, enabling HDMI 2.0b 4K60 8-bit signaling over longer cable runs. Key features include adaptive and fixed receiver equalization for ISI compensation, output swing/pre-emphasis/transition-density drive control, integrated I2C control with pass-through EDID/HDCP/HPD logic, and DisplayPort dual-mode 1.1 cable adapter support. The retimer operates from a single 3.3V supply and exposes configurable registers via I2C for sink-side tuning of the recovered link. Architecturally, the SNx5DP159 combines a CTLE (continuous-time linear equalizer) input stage, a CDR (clock-and-data recovery) PLL, and a TMDS driver with programmable pre-emphasis. The 48-pin RGZ package exposes all four TMDS lanes, the auxiliary/HEAC+/DDC pair, and full I2C-side configuration I/O. A smaller 40-pin RSB (WQFN) package version is also offered for space-constrained dongles. Typical applications include HDMI 2.0b dongles and adapters, set-top boxes, notebook and docking stations, 4K TVs and projectors, gaming consoles, and DP++ to HDMI adapters. The chip is also used in HDMI splitter/selector boards that need to clean up jittery inputs from long upstream cables. When designing with this device, place AC-coupling capacitors close to the TMDS input pins as required by HDMI, provide a clean 3.3V rail, and route the I2C lines with pull-ups. The HPD, DDC, and CEC paths must be level-shifted correctly when bridging between 3.3V and 5V HDMI logic. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes for the SN65DP159RGZT HDMI retimer that are not consolidated on any single manufacturer or distributor page.

RFQ پەیوەندی
STDP2650AD - HDMI 1.4 DisplayPort Converter | Kinetic Technologies
STDP2650AD

STDP2650AD - HDMI 1.4 DisplayPort Converter | Kinetic Technologies

The Kinetic Technologies STDP2650AD is an advanced DisplayPort-to-HDMI video converter IC with I2C and SPI control interfaces, supplied in an 81-BGA package measuring 8 mm by 8 mm. The converter is associated with HDMI 1.4 support and is intended for systems that need to translate DisplayPort video signals into HDMI-compatible outputs. Its I2C and SPI interfaces provide flexible configuration and control from a host processor, while the integrated converter function reduces the need for external display-format translation hardware. The verified product information identifies the STDP2650AD as a video converter IC in an 81-BGA (8x8) package. A DisplayPort-to-HDMI converter is a semiconductor in the video processing and display interface category. DisplayPort is a digital display interface commonly used to connect computers, graphics systems, and other video sources to monitors. HDMI is a separate digital audio and video interface widely used in consumer electronics, televisions, projectors, and displays. A converter such as the STDP2650AD bridges these interface ecosystems by accepting a DisplayPort input and producing an HDMI output, allowing source equipment and display equipment to operate with different connector standards. The principal verified features of the STDP2650AD are its DisplayPort-to-HDMI conversion function, HDMI 1.4 support, I2C control capability, SPI control capability, and 81-BGA package. The I2C and SPI interfaces allow firmware or system-control logic to configure the converter and manage display-related functions. The 8 mm by 8 mm BGA package supports compact integration on multilayer printed circuit boards, although high-density ball-grid-array assembly requires careful PCB layout, thermal management, and inspection processes. The STDP2650AD is suited to computer monitors, graphics-adapter output cards, docking stations, industrial display systems, digital signage, and audiovisual equipment where a DisplayPort source must connect to an HDMI sink. A design using this converter must account for DisplayPort link requirements, HDMI output characteristics, reference-clock and power-supply implementation, connector integration, and the signal-integrity demands of high-speed video links. The package also requires assembly methods capable of handling fine-pitch BGA connections and adequate thermal pathways. A principal design consideration is that the verified snippets do not provide the complete electrical limits, supported display resolutions, refresh rates, color formats, operating-temperature range, pinout, or reference-design details. Engineers should therefore use the manufacturer datasheet for those values and for the required external components. The converter should be selected only after confirming compatibility among the DisplayPort source, supported HDMI mode, sink capability, control firmware, and system power architecture. This page consolidates verified distributor listings, package information, interface capabilities, and practical integration guidance. It also documents where primary datasheet verification remains necessary, rather than presenting unverified electrical values as guaranteed specifications.

RFQ پەیوەندی
STDP2650ADT - HDMI 1.4 DisplayPort Converter | Kinetic Technologies
STDP2650ADT

STDP2650ADT - HDMI 1.4 DisplayPort Converter | Kinetic Technologies

The Kinetic Technologies STDP2650ADT is an advanced DisplayPort-to-HDMI video converter IC designed for HDMI 1.4 display conversion and modern digital display interfaces. The device operates from a 1.2 V to 3.3 V supply, supports I2C and SPI control interfaces, and is supplied in an 81-BGA 8 x 8 mm surface-mount package. It is intended for systems that need to translate DisplayPort source signals into HDMI-compatible output signals while preserving programmable control and video-conversion functionality. A DisplayPort-to-HDMI converter is a video interface IC that bridges two display standards. DisplayPort is primarily used by computers, docking stations, monitors, and embedded systems, while HDMI remains common in televisions, projectors, displays, and consumer AV equipment. The converter IC sits between a DisplayPort source and an HDMI sink, handling digital video conversion and associated control signaling. This makes the STDP2650ADT relevant to adapters, docking systems, industrial panels, commercial displays, and embedded video equipment. The verified product information identifies the STDP2650ADT as an HDMI 1.4 video converter with I2C and SPI configuration control. Its 1.2 V to 3.3 V operating supply supports integration with low-voltage digital systems, while the 81-BGA package provides a compact surface-mount solution for multilayer PCB designs. The package format is intended for high-density equipment where connector placement, EMI control, and signal routing determine whether a converter can be implemented reliably. Compared with passive DisplayPort-to-HDMI adapters, an active converter IC can support source negotiation, programmable operating parameters, and system-level control through I2C or SPI. The control interface allows firmware or system logic to identify supported display configurations and manage the converter within a larger video subsystem. Because the verified data does not provide resolution, refresh-rate, color-depth, propagation-delay, operating-temperature, or absolute-maximum details, those specifications should be confirmed in the manufacturer datasheet before release to production. Typical uses include USB-C and Thunderbolt docking stations, DisplayPort-to-HDMI adapters, industrial HMI panels, digital signage, projector interfaces, and embedded display products. In these applications, the converter reduces the need for a separate external adapter and enables a compact board-level implementation. The design must still account for connector compliance, display timing support, power sequencing, ground continuity, and the impedance-sensitive high-speed signal paths. The primary design consideration is that the converter does not remove the need for careful PCB implementation. DisplayPort and HDMI links are high-speed differential interfaces, so trace routing, connector launches, reference planes, and return paths directly affect signal integrity. The STDP2650ADT should be evaluated against the exact source and sink requirements, including HDMI version, supported display timing, HDCP requirements, audio behavior, and the target power architecture. This page consolidates the verified distributor descriptions, package and interface information, sourcing links, and engineering guidance for the STDP2650ADT. It distinguishes confirmed data from specifications that still require datasheet confirmation, helping designers make a faster initial component-selection decision without treating unverified parameters as guaranteed capabilities.

RFQ پەیوەندی
STDP4020AD - DisplayPort Receiver | Kinetic Technologies
STDP4020AD

STDP4020AD - DisplayPort Receiver | Kinetic Technologies

Kinetic Technologies STDP4020AD is a DisplayPort receiver IC with a 1.2 V to 3.3 V operating voltage range, I2C control, RGB and YCC video support, and a 164-LFBGA package measuring 12 mm by 12 mm. It converts DisplayPort input signals into configurable LVDS or LVTTL outputs for display and video-processing systems. The receiver supports 8-bit, 10-bit, and 12-bit color, with 12-bit operation limited to YCC 4:2:2 format. A DisplayPort receiver is an interface IC that terminates a DisplayPort source, recovers digital video data, and converts that data for display drivers, panels, scalers, or downstream processing logic. Within the interface hierarchy, the STDP4020AD belongs to the video interface IC class and ultimately the broader integrated-circuit and semiconductor categories. Its flexible output mapping allows one receiver design to interface with different display-controller and panel architectures. The STDP4020AD provides four LVDS output lanes and two 60-bit LVTTL output ports. According to the Kinetic Technologies datasheet, the quad-LVDS interface accepts video signals up to a 400 MHz pixel rate. Configurable lane and channel swapping simplifies PCB routing and helps match internal signal organization to the target display interface. RGB and YCC formats support integration with conventional digital-video pipelines. The device uses an I2C control interface for configuration and integration with a system controller. Its 1.2 V to 3.3 V operating range allows use within systems having separate low-voltage core and higher-voltage interface rails. Output color depth can be selected at 8 bits, 10 bits, or 12 bits, but the 12-bit mode supports YCC 4:2:2 only, making that distinction important when designing for full RGB operation. Typical uses include DisplayPort-to-LVDS conversion in commercial displays, industrial panel interfaces, docking systems, video walls, and embedded display controllers. The 164-LFBGA package supports compact designs but requires careful high-speed layout and a land pattern with fine-pitch escape routing. Thermal performance, power sequencing, connector geometry, and LVDS trace impedance should be evaluated together rather than treated as independent issues. A critical design step is validating DisplayPort input impedance and each LVDS or LVTTL output against the actual connector, panel, and timing requirements. Use the manufacturer's reference layout as the starting point, preserve continuous reference planes, control differential-pair geometry, and provide the documented input, output, and bypass capacitance. System designers should also confirm that the selected output format, color depth, lane mapping, and clocking arrangement match the downstream controller. This page consolidates the verified distributor and datasheet findings for the STDP4020AD, including package, interface, format, pixel-rate, and voltage information. It also distinguishes confirmed drop-in naming variants from unverified substitutes so engineers can make a compatibility decision without treating generic cross-reference results as proof of pin-level equivalence.

RFQ پەیوەندی
STDP4320BA - DisplayPort 1.2a Splitter | Kinetic Technologies
STDP4320BA

STDP4320BA - DisplayPort 1.2a Splitter | Kinetic Technologies

The Kinetic Technologies STDP4320BA is a high-speed DisplayPort 1.2a splitter integrated circuit with one dual-mode input port and two dual-mode output ports. The device routes DisplayPort, HDMI, or DVI video to two configurable outputs for docking stations, notebooks, video hubs, 4K2K televisions, monitor daisy chains, and digital signage systems. It is supplied in a 172-LFBGA package measuring 12 mm by 12 mm. A DisplayPort splitter is a semiconductor that accepts one high-speed video stream and distributes it across multiple display outputs. It belongs to the video interface IC and video processing hierarchy, where transmitter, receiver, converter, and splitter devices move uncompressed digital video between a video source and one or more panels. The STDP4320BA operates as a dual-mode splitter, allowing its outputs to be configured as DisplayPort or HDMI/DVI rather than serving only a single interface type. According to the manufacturer datasheet, the receiver characteristics support HBR2 operation in accordance with the DisplayPort 1.2a specification, while the physical layer is also configurable for HDMI 1.4 operation at data rates up to 3.2 Gbps. The device is controlled through I2C and SPI interfaces and uses non-volatile configuration storage to retain its operating configuration. The supplied operating-voltage range is 1.2 V to 3.3 V. Typical implementations use the STDP4320BA when a portable computer or docking system must expose two independent display outputs. It is also suited to 4K2K television and video-hub designs, digital-signage installations, and daisy-chained monitors. Its dual-mode output architecture reduces the need for separate splitter silicon when a product must accept DisplayPort and distribute compatible HDMI or DVI signals. A 172-ball LFBGA demands careful PCB layout, including short high-speed differential routing, continuous reference planes, controlled impedance, and placement of support components close to their associated pins. Because the verified data does not provide a complete public pin table or exposed-pad connection details, the package diagram and pinout must be checked against the current Kinetic Technologies documentation before layout release.

RFQ پەیوەندی
TDA19989BET/C1,557 - 150MHz HDMI 1.4 TX | NXP Semiconductors
TDA19989BET-C1557

TDA19989BET/C1,557 - 150MHz HDMI 1.4 TX | NXP Semiconductors

The NXP Semiconductors TDA19989BET/C1,557 is a 150 MHz pixel rate HDMI 1.4 transmitter video IC with 3 x 8-bit video inputs, HDCP 1.3 content protection, and CEC support, housed in a 64-pin TFBGA (4.5 x 4.5 mm) package. A video transmitter IC (also called an HDMI transmitter or video encoder) is an interface IC that converts a parallel digital video stream, such as ITU-R BT.656 or RGB data, into a serial TMDS (Transition Minimized Differential Signaling) signal compliant with HDMI or DVI standards. In the signal-chain hierarchy, it sits between a graphics source or video processor and the HDMI physical connector, performing serialization, encoding, and content-protection tasks required by the CEA-861B, HDMI 1.3a/1.4, and DVI 1.0 specifications. Key features include support for CEA-861B, DVI 1.0, HDMI v1.3a and HDMI 1.4 formats, HDCP 1.3 for encrypted content delivery, an I2C control interface, and ITU656 video input compatibility. The 150 MHz pixel rate supports video resolutions up to 1080p, while the 64-TFBGA footprint keeps board area to approximately 20.25 square millimeters for space-constrained designs. Architecturally, the TDA19989B family integrates TMDS serializers, an HDCP cipher engine, an audio return and CEC block, and flexible input multiplexing for three 8-bit video buses. The I2C register interface allows a host microcontroller to configure timing, audio, and protection parameters. The C/1,557 ordering suffix identifies the standard-rated commercial temperature grade in tape-and-reel packaging. Typical applications include set-top boxes, digital televisions and monitors, AV receivers, video projectors, and embedded systems that must output HDMI while processing ITU656 or RGB video internally. When designing with this device, provide a stable low-jitter TMDS reference clock and follow NXP layout guidance for 100-ohm differential impedance routing on the HDMI lanes; HDCP key handling also requires attention to firmware security practices. This page synthesizes distributor inventory data, drop-in alternative guidance, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
TDA19989BET/C1551 - 150MHz HDMI 1.4 Transmitter | NXP
TDA19989BET/C1551

TDA19989BET/C1551 - 150MHz HDMI 1.4 Transmitter | NXP

The NXP TDA19989BET/C1551 is a 150 MHz pixel rate HDMI 1.4 transmitter IC with HDCP 1.3 content protection and CEC support, housed in a 64-ball TFBGA (4.5 x 4.5 mm) package. It accepts parallel digital video (RGB/YCbCr, ITU656) and serializes it for HDMI or DVI output at pixel rates up to 150 MHz. An HDMI transmitter is a video interface IC that converts parallel or digital video bus data into the TMDS (Transition Minimized Differential Signaling) serial stream defined by the HDMI and DVI standards. Within the system hierarchy, it sits in the video signal chain between a graphics source (SoC, FPGA, or video processor) and the physical HDMI connector, and belongs to the broader class of interface ICs and video processing ICs. Key features include the 150 MHz pixel clock supporting 1080p60 video, compliance with CEA-861B, DVI 1.0, and HDMI v1.3a signaling with HDMI 1.4 capability, and integrated HDCP 1.3 cipher engine for protected content. An I2C host interface programs registers, controls the HDCP state machine, and reads EDID from the sink via DDC. CEC support enables consumer electronics control channel communication over the HDMI cable. Architecturally, the TDA19989 family combines input video formatting, TMDS serialization, audio embedding, infoframe generation, and HDCP encryption in a single low-power CMOS die. The 3 x 8-bit video input bus accepts RGB or YCbCr formats, while audio is accepted via I2S or S/PDIF-style inputs and multiplexed into the TMDS stream. Typical applications include set-top boxes, Blu-ray/DVD players, digital media adapters, automotive infotainment head units, and embedded boards with HDMI display outputs. Its compact 4.5 mm BGA suits space-constrained consumer and industrial designs. Designers should note that HDCP license agreements govern use of the cipher, and that the 64-TFBGA requires controlled-impedance TMDS routing on the PCB. Note the part is listed as obsolete by some sources, so verify lifecycle for new designs. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
THS7313PW - 3-Channel 6dB SDTV Video Amp | Texas Instruments
THS7313PW

THS7313PW - 3-Channel 6dB SDTV Video Amp | Texas Instruments

The Texas Instruments THS7313PW is a three-channel, low-power SDTV video amplifier with I2C control, selectable 6 dB gain, sag correction, 2:1 input multiplexing, and selectable input-bias modes. The device operates from a single 2.7 V to 5 V supply and is packaged in a 20-pin TSSOP (PW) package. It combines three video processing channels with digital configuration in one low-power integrated circuit. A video amplifier conditions analog composite video signals by providing gain, impedance buffering, bias control, and correction functions before the signal reaches an encoder, display interface, or video capture stage. The THS7313 belongs to the video-amplifier hierarchy within interface ICs and is intended for SDTV and related composite-video signal paths requiring controlled amplitude and multiple source selection. The principal features are three integrated video channels, 6 dB gain, 2:1 input multiplexing, sag correction, I2C-controlled configuration, and selectable input-bias modes. The 2:1 multiplexer allows each channel to select between two video inputs, reducing the number of external routing components when the source changes infrequently. I2C control supports programmable configuration while avoiding dedicated control pins for every parameter. The device is fabricated using Texas Instruments' complementary silicon-germanium BiCom-III process. This process supports the integration of high-speed analog video functions, low-power operation, and digital control in one monolithic device. Single-supply operation also simplifies PCB power planning in portable and space-constrained consumer equipment. Typical uses include SDTV set-top boxes, video scalers, digital video recorders, television sets, video game consoles, and other systems that process composite video. The three-channel architecture suits designs carrying red, green, and blue component signals or three separate composite-video channels. The integrated multiplexer is especially useful when each channel must accept one of two source signals. Designers should preserve the recommended input and output network, provide a stable low-noise supply, and verify I2C address and configuration settings before enabling signal routing. Because no complete pin-description table is reproduced here, use the manufacturer datasheet pin table and typical-application circuit when assigning tracks, terminating inputs, and placing bypass capacitors. This page consolidates the device identity, package information, verified commercial listing, candidate drop-in relationships, application guidance, and engineering considerations into a practical reference for evaluating the THS7313PW.

RFQ پەیوەندی