LM2903QDG4 vs LM2903DG بەراوردکردن
بەراوردکردنی وردی لایەن بە لایەن لە LM2903QDG4 لەلایەن Texas Instruments و LM2903DG لەلایەن onsemi. تایبەتمەندییە سەرەکییەکان، پارامیتەرە کارەباییەکان، پاکێجکردن، دۆخی چرخەی ژیان، نرخ و بەردەستبوون بەراورد بکە بۆ دیاریکردنی باشترین پێکھێنەر بۆ پێداویستییەکانی دیزاینەکەت.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ چالاکبەراوردکردنی تایبەتمەندییەکان
| پارامەتر | LM2903QDG4 | LM2903DG |
|---|---|---|
| براند | Texas Instruments | onsemi |
| پۆل | Amplifier ICs | Amplifier ICs |
| دۆخی چرخەی ژیان | چالاک | چالاک |
| Comparator Type | Dual differential comparator | General purpose, differential |
| Number of Comparator Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| جۆری دەرچوون | Open-collector | Open-collector, rail-to-rail output swing |
| Logic Compatibility | TTL, CMOS, and MOS compatible | — |
| Differential Input Type | Differential | — |
| مەودای پلەی گەرمیی کارکردن | -40 °C to 125 °C | -40C to +105C |
| پاکێج | 8-pin SOIC, 3.90 mm width | SOIC-8 (D suffix), 8 pins |
| جۆری دامەزراندن | Surface mount | Surface Mount |
| Single-Supply Operation | Supported | — |
| Dual-Supply Operation | Supported | — |
| Independent Comparators | 2 independent channels | — |
| Differential Input Voltage Range | ±36 V | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | — |
| دۆخی RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Standard Tape-and-Reel Quantity | [DATA_NEEDED: standard tape-and-reel quantity] | — |
| Number of Channels | — | 2 (dual independent comparators) |
| Supply Voltage Range (Single) | — | 2 V to 36 V |
| Supply Voltage Range (Split) | — | +/-1 V to +/-18 V |
| Input Offset Voltage (Typ) | — | 2 mV |
| Response Time / Propagation Delay | — | 1.3 us (typical) |
| Supply Current per Comparator | — | 0.4 mA (typical, largely independent of VCC) |
| Common-Mode Input Range | — | Includes ground (negative rail) in single-supply operation |
| Maximum Supply Voltage Rating | — | 36 V (V-suffix devices tested to 32 V) |
| Minimum VCC Above Common-Mode | — | 1.5 V |
| Description Category | — | Low Offset Voltage Dual Comparators |