LM2903QDG4 vs LM2903DG Perbandingan
Perbandingan bersamaan detil LM2903QDG4 dari Texas Instruments dan LM2903DG dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2903QDG4 | LM2903DG |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual differential comparator | General purpose, differential |
| Number of Comparator Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Tipe Output | Open-collector | Open-collector, rail-to-rail output swing |
| Logic Compatibility | TTL, CMOS, and MOS compatible | — |
| Differential Input Type | Differential | — |
| Rentang Suhu Kerja | -40 °C to 125 °C | -40C to +105C |
| Paket | 8-pin SOIC, 3.90 mm width | SOIC-8 (D suffix), 8 pins |
| Tipe Mounting | Surface mount | Surface Mount |
| Single-Supply Operation | Supported | — |
| Dual-Supply Operation | Supported | — |
| Independent Comparators | 2 independent channels | — |
| Differential Input Voltage Range | ±36 V | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Standard Tape-and-Reel Quantity | [DATA_NEEDED: standard tape-and-reel quantity] | — |
| Number of Channels | — | 2 (dual independent comparators) |
| Supply Voltage Range (Single) | — | 2 V to 36 V |
| Supply Voltage Range (Split) | — | +/-1 V to +/-18 V |
| Input Offset Voltage (Typ) | — | 2 mV |
| Response Time / Propagation Delay | — | 1.3 us (typical) |
| Supply Current per Comparator | — | 0.4 mA (typical, largely independent of VCC) |
| Common-Mode Input Range | — | Includes ground (negative rail) in single-supply operation |
| Maximum Supply Voltage Rating | — | 36 V (V-suffix devices tested to 32 V) |
| Minimum VCC Above Common-Mode | — | 1.5 V |
| Description Category | — | Low Offset Voltage Dual Comparators |