LM2903QDG4 vs LM2903DG Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng LM2903QDG4 sa pamamagitan ng Texas Instruments at LM2903DG sa pamamagitan ng onsemi. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | LM2903QDG4 | LM2903DG |
|---|---|---|
| Brand | Texas Instruments | onsemi |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Comparator Type | Dual differential comparator | General purpose, differential |
| Number of Comparator Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Type ng Output | Open-collector | Open-collector, rail-to-rail output swing |
| Logic Compatibility | TTL, CMOS, and MOS compatible | — |
| Differential Input Type | Differential | — |
| Hanay ng Temperature na Operasyon | -40 °C to 125 °C | -40C to +105C |
| Packhaging | 8-pin SOIC, 3.90 mm width | SOIC-8 (D suffix), 8 pins |
| Uri ng Pagpapasok | Surface mount | Surface Mount |
| Single-Supply Operation | Supported | — |
| Dual-Supply Operation | Supported | — |
| Independent Comparators | 2 independent channels | — |
| Differential Input Voltage Range | ±36 V | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Standard Tape-and-Reel Quantity | [DATA_NEEDED: standard tape-and-reel quantity] | — |
| Number of Channels | — | 2 (dual independent comparators) |
| Supply Voltage Range (Single) | — | 2 V to 36 V |
| Supply Voltage Range (Split) | — | +/-1 V to +/-18 V |
| Input Offset Voltage (Typ) | — | 2 mV |
| Response Time / Propagation Delay | — | 1.3 us (typical) |
| Supply Current per Comparator | — | 0.4 mA (typical, largely independent of VCC) |
| Common-Mode Input Range | — | Includes ground (negative rail) in single-supply operation |
| Maximum Supply Voltage Rating | — | 36 V (V-suffix devices tested to 32 V) |
| Minimum VCC Above Common-Mode | — | 1.5 V |
| Description Category | — | Low Offset Voltage Dual Comparators |