LM2903QDG4 vs LM2903DG तुलना
विस्तृत दोनों ओर की तुलना LM2903QDG4 द्वारा Texas Instruments और LM2903DG द्वारा onsemi. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ सक्रियविशेषता तुलना
| पैरामीटर | LM2903QDG4 | LM2903DG |
|---|---|---|
| ब्रांड | Texas Instruments | onsemi |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Comparator Type | Dual differential comparator | General purpose, differential |
| Number of Comparator Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| आउटपुट प्रकार | Open-collector | Open-collector, rail-to-rail output swing |
| Logic Compatibility | TTL, CMOS, and MOS compatible | — |
| Differential Input Type | Differential | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to 125 °C | -40C to +105C |
| पैकेज | 8-pin SOIC, 3.90 mm width | SOIC-8 (D suffix), 8 pins |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| Single-Supply Operation | Supported | — |
| Dual-Supply Operation | Supported | — |
| Independent Comparators | 2 independent channels | — |
| Differential Input Voltage Range | ±36 V | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Standard Tape-and-Reel Quantity | [DATA_NEEDED: standard tape-and-reel quantity] | — |
| Number of Channels | — | 2 (dual independent comparators) |
| Supply Voltage Range (Single) | — | 2 V to 36 V |
| Supply Voltage Range (Split) | — | +/-1 V to +/-18 V |
| Input Offset Voltage (Typ) | — | 2 mV |
| Response Time / Propagation Delay | — | 1.3 us (typical) |
| Supply Current per Comparator | — | 0.4 mA (typical, largely independent of VCC) |
| Common-Mode Input Range | — | Includes ground (negative rail) in single-supply operation |
| Maximum Supply Voltage Rating | — | 36 V (V-suffix devices tested to 32 V) |
| Minimum VCC Above Common-Mode | — | 1.5 V |
| Description Category | — | Low Offset Voltage Dual Comparators |