SP485EEP-L vs ISL8485EIP بەراوردکردن
بەراوردکردنی وردی لایەن بە لایەن لە SP485EEP-L لەلایەن MaxLinear و ISL8485EIP لەلایەن Renesas Electronics. تایبەتمەندییە سەرەکییەکان، پارامیتەرە کارەباییەکان، پاکێجکردن، دۆخی چرخەی ژیان، نرخ و بەردەستبوون بەراورد بکە بۆ دیاریکردنی باشترین پێکھێنەر بۆ پێداویستییەکانی دیزاینەکەت.
بەراوردکردنی تایبەتمەندییەکان
| پارامەتر | SP485EEP-L | ISL8485EIP |
|---|---|---|
| براند | MaxLinear | Renesas Electronics |
| پۆل | Interface ICs | Interface ICs |
| دۆخی چرخەی ژیان | چالاک | چالاک |
| Product Type | Half-duplex RS-485/RS-422 transceiver | Single RS-485/RS-422 transceiver |
| Maximum Data Rate | 5 Mbps | 5 Mbps |
| ڤۆڵتیەی دابینکردن | 5 V | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Process Technology | BiCMOS | BiCMOS |
| ESD Protection, Human Body Model | Over ±15 kV | — |
| ESD Protection, IEC61000-4-2 Air Discharge | Over ±15 kV | — |
| مەودای پلەی گەرمیی کارکردن | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| پاکێج | 8-pin PDIP | 8-pin PDIP |
| جۆری دامەزراندن | Through-hole | Through-hole |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Power Consumption | Low-power operation | — |
| Enhanced ESD Performance | Yes | — |
| Legacy Pin Compatibility | Pin-to-pin compatible with Exar SP481 and SP485 devices | — |
| Delivery Format | Tube | — |
| دۆخی RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Transceivers | — | 1 transceiver |
| Communications Modes | — | RS-485 and RS-422 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Driver Output Protection | — | Short-circuit current limiting |
| Thermal Protection | — | On-chip thermal shutdown |
| ESD Protection | — | ±15 kV on each driver output and receiver input |
| ESD Latch-up Protection | — | Yes |
| Receiver Input Common-Mode Range | — | [DATA_NEEDED: receiver input common-mode range] |
| Maximum Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |