SP485EEP-L vs ISL8485EIP तुलना
विस्तृत दोनों ओर की तुलना SP485EEP-L द्वारा MaxLinear और ISL8485EIP द्वारा Renesas Electronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | SP485EEP-L | ISL8485EIP |
|---|---|---|
| ब्रांड | MaxLinear | Renesas Electronics |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Half-duplex RS-485/RS-422 transceiver | Single RS-485/RS-422 transceiver |
| Maximum Data Rate | 5 Mbps | 5 Mbps |
| सप्लाई वोल्टेज | 5 V | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Process Technology | BiCMOS | BiCMOS |
| ESD Protection, Human Body Model | Over ±15 kV | — |
| ESD Protection, IEC61000-4-2 Air Discharge | Over ±15 kV | — |
| ऑपरेटिंग तापमान रेंज | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| पैकेज | 8-pin PDIP | 8-pin PDIP |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Power Consumption | Low-power operation | — |
| Enhanced ESD Performance | Yes | — |
| Legacy Pin Compatibility | Pin-to-pin compatible with Exar SP481 and SP485 devices | — |
| Delivery Format | Tube | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Transceivers | — | 1 transceiver |
| Communications Modes | — | RS-485 and RS-422 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Driver Output Protection | — | Short-circuit current limiting |
| Thermal Protection | — | On-chip thermal shutdown |
| ESD Protection | — | ±15 kV on each driver output and receiver input |
| ESD Latch-up Protection | — | Yes |
| Receiver Input Common-Mode Range | — | [DATA_NEEDED: receiver input common-mode range] |
| Maximum Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |