SP485EEP-L vs ISL8485EIP Сравнение
Подробное сравнение бок о бок SP485EEP-L от MaxLinear и ISL8485EIP от Renesas Electronics. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | SP485EEP-L | ISL8485EIP |
|---|---|---|
| Бренд | MaxLinear | Renesas Electronics |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Product Type | Half-duplex RS-485/RS-422 transceiver | Single RS-485/RS-422 transceiver |
| Maximum Data Rate | 5 Mbps | 5 Mbps |
| Напряжение питания | 5 V | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Process Technology | BiCMOS | BiCMOS |
| ESD Protection, Human Body Model | Over ±15 kV | — |
| ESD Protection, IEC61000-4-2 Air Discharge | Over ±15 kV | — |
| Диапазон рабочих температур | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Корпус | 8-pin PDIP | 8-pin PDIP |
| Тип монтажа | Through-hole | Through-hole |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Power Consumption | Low-power operation | — |
| Enhanced ESD Performance | Yes | — |
| Legacy Pin Compatibility | Pin-to-pin compatible with Exar SP481 and SP485 devices | — |
| Delivery Format | Tube | — |
| Статус RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Transceivers | — | 1 transceiver |
| Communications Modes | — | RS-485 and RS-422 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Driver Output Protection | — | Short-circuit current limiting |
| Thermal Protection | — | On-chip thermal shutdown |
| ESD Protection | — | ±15 kV on each driver output and receiver input |
| ESD Latch-up Protection | — | Yes |
| Receiver Input Common-Mode Range | — | [DATA_NEEDED: receiver input common-mode range] |
| Maximum Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |