SP485EEP-L vs ISL8485EIP So sánh
So sánh chi tiết song song của SP485EEP-L bằng MaxLinear và ISL8485EIP bằng Renesas Electronics. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | SP485EEP-L | ISL8485EIP |
|---|---|---|
| Thương hiệu | MaxLinear | Renesas Electronics |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Half-duplex RS-485/RS-422 transceiver | Single RS-485/RS-422 transceiver |
| Maximum Data Rate | 5 Mbps | 5 Mbps |
| Điện áp cung cấp | 5 V | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Process Technology | BiCMOS | BiCMOS |
| ESD Protection, Human Body Model | Over ±15 kV | — |
| ESD Protection, IEC61000-4-2 Air Discharge | Over ±15 kV | — |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Hộp | 8-pin PDIP | 8-pin PDIP |
| Kiểu lắp đặt | Through-hole | Through-hole |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Power Consumption | Low-power operation | — |
| Enhanced ESD Performance | Yes | — |
| Legacy Pin Compatibility | Pin-to-pin compatible with Exar SP481 and SP485 devices | — |
| Delivery Format | Tube | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Transceivers | — | 1 transceiver |
| Communications Modes | — | RS-485 and RS-422 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Driver Output Protection | — | Short-circuit current limiting |
| Thermal Protection | — | On-chip thermal shutdown |
| ESD Protection | — | ±15 kV on each driver output and receiver input |
| ESD Latch-up Protection | — | Yes |
| Receiver Input Common-Mode Range | — | [DATA_NEEDED: receiver input common-mode range] |
| Maximum Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |