Analog Devices

ADM202JRWZ - 5V Dual RS-232 Transceiver | Analog Devices

부품 번호: ADM202JRWZ ✓ 활성
5 V Vdss 16-SOIC Package
MOQ: 1 |

ADM202JRWZ 개요

Analog Devices ADM202JRWZ is a 2-channel, full-duplex RS-232 line driver/receiver pair designed to operate from a single 5 V supply. It supports two driver channels and two receiver channels, generates approximately +10 V and -10 V RS-232 output levels with an on-chip charge pump, and requires external charge-pump capacitors as small as 0.1 µF. The device is packaged in a 16-pin SOIC.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a cable-based RS-232 port. It combines a line driver, which converts low-voltage digital signals into RS-232-compatible levels, with a receiver, which converts incoming RS-232 levels back into logic levels. Within the interface hierarchy, the ADM202JRWZ belongs to the RS-232 driver/receiver and transceiver class of data-communication interface ICs.

Key features include operation from one 5 V supply, two transmit and two receive channels, an efficient on-chip charge pump, and approximately ±10 V bipolar output levels. According to the Analog Devices product information, the device meets or exceeds the TIA/EIA-232-E and V.28 specifications. The small 0.1 µF charge-pump capacitors reduce external component size, while the integrated charge-pump circuit simplifies implementation of a working RS-232 port.

The ADM202 architecture separates the two communication directions, allowing full-duplex operation when the corresponding driver outputs and receiver inputs are connected to the same RS-232 lines. Fast driver slew rates support reliable data transmission, and the CMOS-compatible logic interface allows the device to connect directly to a host UART or other digital controller. The 16-SOIC package is suitable for conventional through-hole assembly and automated surface-mount production.

Typical uses include industrial serial consoles, instrumentation, data acquisition equipment, embedded-control systems, and legacy peripheral connections. Two transceiver channels can serve two RS-232 ports or connect to a multiport interface arrangement. The 5 V operating supply also simplifies integration with equipment designed around TTL/CMOS logic and a separate regulated 5 V rail.

PCB design should prioritize short charge-pump capacitor connections, a low-impedance ground return, and protection appropriate to the exposed connector environment. Keep sensitive receiver traces away from fast driver outputs and switching nodes, and follow the pin-description and decoupling guidance in the manufacturer datasheet when assigning tracks and grounding the device.

This product guide combines the manufacturer application details with package, purchasing, replacement, and implementation guidance for engineers evaluating the ADM202JRWZ. It emphasizes the verified 5 V, dual-channel, charge-pump, ±10 V, and 16-SOIC characteristics while separating confirmed information from specifications that still require datasheet confirmation.

드롭인 대체품: ADM202JRWZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADM202JRWZ (동일 폼 팩터 및 풋프린트) — 차이점: Interface Standard, Product Type, Package, ESD Protection, Lead-Free Status.

Analog Devices
Interface Standard: TIA/EIA-232-E and V.28
Product Type: Dual RS-232 line driver/receiver pair
Package: 16-pin SOIC
비교 대상: ADM202JRWZ →
Texas Instruments
Interface Standard: TIA/EIA-232-F
Product Type: Dual RS-232 line driver/receiver transceiver
Package: 16-pin SOIC
비교 대상: ADM202JRWZ →
Texas Instruments
Interface Standard: EIA/TIA-232-F
Product Type: Dual RS-232 driver/receiver transceiver
ESD Protection: Exceeds 2,000 V human-body protection under the cited JESD condition
비교 대상: ADM202JRWZ →

ADM202JRN

✅ 드롭인
Analog Devices
📦 16-SOIC (RW)
Dual RS-232 line driver/receiver pair · 2 · 2 · 5 V · Approximately ±10 V · 0.1 µF · 120 kB/s · TIA/EIA-232-E and V.28

가격 문의

데이터시트 보기 →

ADM202JRNZ

✅ 드롭인
📦 16-SOIC (RW)
Same 5 V, 2/2 full-duplex RS-232 configuration and 16-SOIC package; verified 0% difference in identified channel count, supply voltage, and package

📋 참조 대체품 (카탈로그에 없음)

MAX202IDG4

✅ 드롭인
Texas Instruments
📦 16-SOIC (RW)
Dual RS-232 line driver/receiver transceiver · 5 V · 4.5 V to 5.5 V · 2 · 2 · 120 kbps · ±9 V · ±15 kV

가격 문의

데이터시트 보기 →

ADM202JRWZ 사양

Product Type 2-channel RS-232 line driver/receiver transceiver
공급 전압 5 V
Driver Channel Count 2 channels
Receiver Channel Count 2 channels
Duplex Mode Full duplex
RS-232 Output Level +10 V and -10 V
Charge-Pump Capacitor Value 0.1 µF minimum
Logic Compatibility CMOS
Interface Standard TIA/EIA-232-E
Interface Standard V.28
패키지 16-SOIC
실장 유형 Surface mount
RoHS 상태 Compliant
Lead-Free Status Yes
Green Product Status Yes

ADM202JRWZ 16-soic 핀 구성 가이드

ADM202JRWZ(16-soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ADM202JRWZ의 16-soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ADM202JRWZ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ADM202JRWZ 적합 용도: 6 애플리케이션s: Industrial Serial Console, Data Acquisition Equipment, Embedded Controller Interface, Test and Measurement Instrument, Legacy Peripheral Adapter, Communication Port Concentrator.

🏭

Industrial Serial Console

The ADM202JRWZ fits an industrial console that exchanges commands and diagnostic data over an RS-232 connection. Its single 5 V supply and two full-duplex channels allow one port to serve a control link while another handles status or service traffic. The integrated charge pump produces approximately +10 V and -10 V levels, and charge-pump capacitors as small as 0.1 µF support compact implementation. Place the device close to the connector and logic source, maintain a continuous ground return, and add external protection when the cable leaves the enclosure.

📊

Data Acquisition Equipment

The ADM202JRWZ is useful in laboratory and industrial data-acquisition equipment that must communicate with older instruments through RS-232. Two transmit and two receive channels support full-duplex instrument control and measurement results without requiring separate driver and receiver packages. Operation from one 5 V rail simplifies the interface supply, while the approximately ±10 V charge-pump output matches the required bipolar RS-232 levels. Keep the analog and high-speed digital sections separated from receiver traces and use the connector entry as the location for any selected surge-protection network.

🧩

Embedded Controller Interface

The ADM202JRWZ connects a modern embedded controller to legacy RS-232 peripherals while retaining two independent communication channels. The CMOS-compatible logic side works with a 5 V controller environment, and the integrated charge pump eliminates the need for a separate negative power supply for the RS-232 levels. Its 16-SOIC package is also convenient for designs assembled with mixed through-hole and surface-mount equipment. Confirm the controller UART logic levels and timing, route each driver output away from sensitive receiver inputs, and preserve the ground reference across the complete cable path.

🔧

Test and Measurement Instrument

The ADM202JRWZ can provide a compact bidirectional RS-232 control port in test and measurement instruments. Two full-duplex channels allow commands and responses to coexist on one port while preserving separate signaling paths. The 5 V supply and 0.1 µF-compatible charge-pump capacitors simplify board partitioning, particularly in portable or rack-mounted equipment where component area is important. For laboratory use, check the exact operating-temperature limits and data-rate rating in the manufacturer datasheet, and select connector protection based on the cable length and grounding arrangement.

🔌

Legacy Peripheral Adapter

The ADM202JRWZ is appropriate for adapters that add an RS-232 port to a modern controller or embedded system. Its dual full-duplex architecture can support two peripheral connections when the host has enough UART resources, while the on-chip charge pump reduces the number of external power components. The 16-SOIC footprint is straightforward to assemble and inspect, but cable-side protection remains essential because the connector is exposed to electrostatic discharge and switching transients. Select the adapter components and serial timing so both ends of the link use compatible RS-232 settings.

🌐

Communication Port Concentrator

The ADM202JRWZ can support concentrated legacy communication ports in equipment where space and supply rails are limited. Two RS-232 channels in one 16-SOIC package reduce the footprint compared with separate line-driver and receiver ICs, and the single 5 V operating supply eases power architecture. Its approximately ±10 V output levels satisfy the cited TIA/EIA-232-E and V.28 requirements. In a multiport assembly, maintain independent signal routing, provide a low-impedance common ground, and consider line-driver enable control or power gating if unused ports must be isolated during system startup.

What is the ADM202JRWZ?
The ADM202JRWZ is a 2-channel full-duplex RS-232 driver/receiver transceiver operating from a single 5 V supply. According to the Analog Devices product information, it provides two transmit and two receive channels, uses an on-chip charge pump, and generates approximately +10 V and -10 V RS-232 output levels in a 16-pin SOIC package.
What supply voltage does ADM202JRWZ require?
The ADM202JRWZ requires a single 5 V power supply. This simplifies its use in equipment that already generates a regulated 5 V rail for CMOS logic. The Analog Devices product information identifies the device as a 5 V RS-232 transceiver, while the manufacturer datasheet should be used for the complete operating-range and decoupling details.
Where can I download the ADM202JRWZ datasheet PDF?
The official ADM202 product page is the authoritative starting point for the ADM202JRWZ datasheet and technical documentation. It is located at https://www.analog.com/en/products/adm202.html. Use the manufacturer document for the exact pin descriptions, electrical limits, recommended capacitor values, and typical application circuit rather than relying on a third-party copy.
Where is the ADM202JRWZ pinout?
The ADM202JRWZ pinout is documented in the pin-description table of the Analog Devices ADM202 datasheet and corresponds to its 16-SOIC package. The verified product information identifies the package as 16-SOIC but does not reproduce every numbered terminal, so use the manufacturer pin table when assigning PCB tracks and connector nets.
What charge-pump capacitors does ADM202JRWZ require?
The ADM202JRWZ permits charge-pump capacitors as small as 0.1 µF. According to the Analog Devices product information, the on-chip charge-pump converter develops approximately ±10 V RS-232 output levels from the single 5 V supply. Follow the manufacturer datasheet for the exact capacitor connection, tolerance, and placement requirements.
What RS-232 standards does ADM202JRWZ meet?
The ADM202JRWZ meets or exceeds the TIA/EIA-232-E and V.28 specifications. According to the Analog Devices product information, these requirements cover the basic RS-232 interface behavior and voltage-level characteristics. Additional operating details, including data rate and slew-rate limits, should be confirmed in the manufacturer datasheet.
ADM202JRWZ vs MAX202IDG4: which is the better drop-in choice?
The ADM202JRWZ and MAX202IDG4 are both 2/2 full-duplex RS-232 transceivers in 16-SOIC packages, making them the closest like-for-like comparison identified for this design. The verified material confirms the shared channel configuration and package, but complete electrical differences require direct comparison of the two manufacturer datasheets before production substitution.
When should I choose ADM202JRWZ over MAX202IDG4?
Choose ADM202JRWZ when its Analog Devices datasheet performance, qualification, availability, and lifecycle status match the system requirements more closely than MAX202IDG4. Both devices provide a dual-channel full-duplex RS-232 interface in 16-SOIC, so the decision should be based on verified data-rate, protection, temperature, and supply-level limits rather than package compatibility alone.
Is ADM202JRWZ suitable for an industrial serial console?
The ADM202JRWZ is suitable for many industrial serial-console designs because it provides two full-duplex RS-232 channels from a single 5 V supply and supports compact 0.1 µF charge-pump capacitors. Environmental protection, isolation, connector surge exposure, and operating-temperature requirements should be handled separately and confirmed against the manufacturer datasheet.
What can replace ADM202JRWZ?
A direct replacement must use the same 16-SOIC footprint and preserve the 2-driver, 2-receiver, 5 V RS-232 function. ADM202JRN, ADM202JRNZ, and MAX202IDG4 are the closest identified candidates, but each still requires pin-by-pin and electrical verification. No alternative should be approved solely because it is described as a 16-SOIC transceiver.
What is the best Maxim equivalent for ADM202JRWZ?
MAX202IDG4 is the closest identified Maxim equivalent because it is listed in the same RS-232 transceiver comparison and also uses a 16-SOIC package. Before using it as a drop-in replacement, compare pin functions, charge-pump capacitor connections, logic thresholds, data rate, operating temperature, and protection ratings in the respective manufacturer datasheets.
Is ADM202JRWZ in stock and what is its lead time?
Current stock and lead time for ADM202JRWZ should be requested through the Request a Quote form on this page because channel inventory can change quickly. Manufacturer and distributor listings identify the component as available, but a listing alone does not establish a guaranteed quantity or delivery schedule for a specific production order.
Where can I buy ADM202JRWZ online?
Use the Request a Quote form on this page to request ADM202JRWZ availability, order quantity, and delivery information. The product is offered in 16-SOIC packaging, and the Z suffix identifies the tape-and-reel ordering configuration shown by the manufacturer and distributor records.
How much does ADM202JRWZ cost?
Use the Request a Quote form on this page for the current unit price and volume breaks for ADM202JRWZ. Pricing can vary with order quantity, package configuration, inventory, and market conditions, so a historical catalog amount should not be treated as a current quotation.
What are the key specifications of ADM202JRWZ that engineers should know?
The ADM202JRWZ is a 5 V, 2-channel full-duplex RS-232 transceiver in a 16-SOIC package. Its on-chip charge pump develops approximately +10 V and -10 V levels with charge-pump capacitors as small as 0.1 µF, and the device meets or exceeds TIA/EIA-232-E and V.28 specifications according to Analog Devices.

엔지니어링 참조 데이터: ADM202JRWZ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ADM202JRWZ for a compact 5 V design requiring two full-duplex RS-232 channels and approximately ±10 V charge-pump outputs. ADM202JRN and ADM202JRNZ are the closest same-family choices because they retain the identified 16-SOIC, 2/2 transceiver configuration; select them when their temperature grade, order suffix, or current product status better matches the production program. MAX202IDG4 is the closest identified cross-brand option with the same 16-SOIC and 2/2 arrangement, but its data rate, logic thresholds, protection, and charge-pump details must be checked directly before substitution. For a one-port design, MAX3221IPWR may be more appropriate because it uses fewer transceiver channels. None of these package-level similarities replaces a complete pinout, timing, electrical-limit, and application-circuit review.

대체품과의 비교

파라미터 이 제품 ADM202JRN ADM202JRNZ MAX202IDG4
Brand Analog Devices Analog Devices Analog Devices Maxim Integrated
Package 16-SOIC (RW) 16-SOIC (RW) 16-SOIC (RW) 16-SOIC (RW)
Device Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Driver Channel Count 2 channels 2 channels 2 channels 2 channels
Receiver Channel Count 2 channels 2 channels 2 channels 2 channels
Supply Voltage 5 V 5 V 5 V 5 V

주요 차별점

  • Combines two complete RS-232 channels in one 16-SOIC package (vs MAX3221IPWR)
  • Uses compact charge-pump capacitors (vs MAX202IDG4)
  • Provides specified bipolar RS-232 levels from one supply (vs MAX202IDG4)

설계 노트

Place the 0.1 µF-compatible charge-pump capacitors and required bypass capacitors directly beside their associated ADM202JRWZ pins. Keep these loops short because charge-pump switching current produces high-frequency current edges. Route the charge-pump and driver paths away from receiver inputs to minimize differential crosstalk and maintain reliable operation across the supported RS-232 data rate.

Assign the two driver outputs and two receiver inputs according to the manufacturer pin-description table before finalizing the PCB. Keep each RS-232 cable route away from clocks, switching regulators, and high-current return paths. Provide a low-impedance ground reference, and use the connector entry area for any selected ESD or surge-protection components so chassis and system-ground decisions remain controlled.

Do not assume that every 16-SOIC RS-232 transceiver is electrically interchangeable. Before replacing ADM202JRWZ with ADM202JRN, ADM202JRNZ, or MAX202IDG4, compare charge-pump capacitor values, logic thresholds, driver and receiver enable functions, data rate, operating temperature, and ESD rating. The Z suffix denotes a tape-and-reel ordering option and should not be interpreted as an electrical change.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The product record identifies ADM202JRWZ as RoHS-compliant, lead-free, and green. AEC-Q100 status is not stated for this RS-232 interface IC and is treated as not applicable rather than qualified.

관련 검색

ADM202JRWZ datasheet ADM202JRWZ datasheet pdf ADM202JRWZ pinout ADM202JRWZ 16-SOIC Analog Devices ADM202JRWZ ADM202JRWZ 5V RS-232 ADM202JRWZ dual RS-232 transceiver ADM202JRWZ equivalent ADM202JRWZ replacement ADM202JRWZ vs MAX202IDG4 ADM202JRWZ price ADM202JRWZ stock

관련 부품 & 용어

Analog Devices ADM202JRWZ ADM202JRN ADM202JRNZ MAX202IDG4 Maxim Integrated RS-232 transceiver line driver line receiver full duplex charge pump CMOS TIA/EIA-232-E V.28 16-SOIC SOIC family surface mount 5 V power supply industrial serial console data acquisition equipment embedded controller interface legacy peripheral adapter communication port concentrator RoHS lead-free electronics
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기