ADM202JRWZ - 5V Dual RS-232 Transceiver | Analog Devices
MPN: ADM202JRWZ ✓ 啟用中ADM202JRWZ 概覽
An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a cable-based RS-232 port. It combines a line driver, which converts low-voltage digital signals into RS-232-compatible levels, with a receiver, which converts incoming RS-232 levels back into logic levels. Within the interface hierarchy, the ADM202JRWZ belongs to the RS-232 driver/receiver and transceiver class of data-communication interface ICs.
Key features include operation from one 5 V supply, two transmit and two receive channels, an efficient on-chip charge pump, and approximately ±10 V bipolar output levels. According to the Analog Devices product information, the device meets or exceeds the TIA/EIA-232-E and V.28 specifications. The small 0.1 µF charge-pump capacitors reduce external component size, while the integrated charge-pump circuit simplifies implementation of a working RS-232 port.
The ADM202 architecture separates the two communication directions, allowing full-duplex operation when the corresponding driver outputs and receiver inputs are connected to the same RS-232 lines. Fast driver slew rates support reliable data transmission, and the CMOS-compatible logic interface allows the device to connect directly to a host UART or other digital controller. The 16-SOIC package is suitable for conventional through-hole assembly and automated surface-mount production.
Typical uses include industrial serial consoles, instrumentation, data acquisition equipment, embedded-control systems, and legacy peripheral connections. Two transceiver channels can serve two RS-232 ports or connect to a multiport interface arrangement. The 5 V operating supply also simplifies integration with equipment designed around TTL/CMOS logic and a separate regulated 5 V rail.
PCB design should prioritize short charge-pump capacitor connections, a low-impedance ground return, and protection appropriate to the exposed connector environment. Keep sensitive receiver traces away from fast driver outputs and switching nodes, and follow the pin-description and decoupling guidance in the manufacturer datasheet when assigning tracks and grounding the device.
This product guide combines the manufacturer application details with package, purchasing, replacement, and implementation guidance for engineers evaluating the ADM202JRWZ. It emphasizes the verified 5 V, dual-channel, charge-pump, ±10 V, and 16-SOIC characteristics while separating confirmed information from specifications that still require datasheet confirmation.
直接替換替代品,適用於 ADM202JRWZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADM202JRWZ (相同外形與佔位) — 差異在於 Interface Standard, Product Type, Package, ESD Protection, Lead-Free Status.
ADM202JRN
✅ 直接替換聯絡詢價
查看資料表 →ADM202JRNZ
✅ 直接替換📋 參考替代品(不在目錄中)
MAX202IDG4
✅ 直接替換聯絡詢價
查看資料表 →ADM202JRWZ 規格
| Product Type | 2-channel RS-232 line driver/receiver transceiver |
| 供應電壓 | 5 V |
| Driver Channel Count | 2 channels |
| Receiver Channel Count | 2 channels |
| Duplex Mode | Full duplex |
| RS-232 Output Level | +10 V and -10 V |
| Charge-Pump Capacitor Value | 0.1 µF minimum |
| Logic Compatibility | CMOS |
| Interface Standard | TIA/EIA-232-E |
| Interface Standard | V.28 |
| 封裝 | 16-SOIC |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
| Lead-Free Status | Yes |
| Green Product Status | Yes |
ADM202JRWZ 16-soic 腳位配置指南
ADM202JRWZ(16-soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADM202JRWZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADM202JRWZ 適用於 6 應用s: Industrial Serial Console, Data Acquisition Equipment, Embedded Controller Interface, Test and Measurement Instrument, Legacy Peripheral Adapter, Communication Port Concentrator.
Industrial Serial Console
The ADM202JRWZ fits an industrial console that exchanges commands and diagnostic data over an RS-232 connection. Its single 5 V supply and two full-duplex channels allow one port to serve a control link while another handles status or service traffic. The integrated charge pump produces approximately +10 V and -10 V levels, and charge-pump capacitors as small as 0.1 µF support compact implementation. Place the device close to the connector and logic source, maintain a continuous ground return, and add external protection when the cable leaves the enclosure.
推薦
Data Acquisition Equipment
The ADM202JRWZ is useful in laboratory and industrial data-acquisition equipment that must communicate with older instruments through RS-232. Two transmit and two receive channels support full-duplex instrument control and measurement results without requiring separate driver and receiver packages. Operation from one 5 V rail simplifies the interface supply, while the approximately ±10 V charge-pump output matches the required bipolar RS-232 levels. Keep the analog and high-speed digital sections separated from receiver traces and use the connector entry as the location for any selected surge-protection network.
推薦
Embedded Controller Interface
The ADM202JRWZ connects a modern embedded controller to legacy RS-232 peripherals while retaining two independent communication channels. The CMOS-compatible logic side works with a 5 V controller environment, and the integrated charge pump eliminates the need for a separate negative power supply for the RS-232 levels. Its 16-SOIC package is also convenient for designs assembled with mixed through-hole and surface-mount equipment. Confirm the controller UART logic levels and timing, route each driver output away from sensitive receiver inputs, and preserve the ground reference across the complete cable path.
推薦
Test and Measurement Instrument
The ADM202JRWZ can provide a compact bidirectional RS-232 control port in test and measurement instruments. Two full-duplex channels allow commands and responses to coexist on one port while preserving separate signaling paths. The 5 V supply and 0.1 µF-compatible charge-pump capacitors simplify board partitioning, particularly in portable or rack-mounted equipment where component area is important. For laboratory use, check the exact operating-temperature limits and data-rate rating in the manufacturer datasheet, and select connector protection based on the cable length and grounding arrangement.
推薦
Legacy Peripheral Adapter
The ADM202JRWZ is appropriate for adapters that add an RS-232 port to a modern controller or embedded system. Its dual full-duplex architecture can support two peripheral connections when the host has enough UART resources, while the on-chip charge pump reduces the number of external power components. The 16-SOIC footprint is straightforward to assemble and inspect, but cable-side protection remains essential because the connector is exposed to electrostatic discharge and switching transients. Select the adapter components and serial timing so both ends of the link use compatible RS-232 settings.
推薦
Communication Port Concentrator
The ADM202JRWZ can support concentrated legacy communication ports in equipment where space and supply rails are limited. Two RS-232 channels in one 16-SOIC package reduce the footprint compared with separate line-driver and receiver ICs, and the single 5 V operating supply eases power architecture. Its approximately ±10 V output levels satisfy the cited TIA/EIA-232-E and V.28 requirements. In a multiport assembly, maintain independent signal routing, provide a low-impedance common ground, and consider line-driver enable control or power gating if unused ports must be isolated during system startup.
推薦
推薦產品摘要
工程參考資料,適用於 ADM202JRWZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADM202JRN | ADM202JRNZ | MAX202IDG4 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated |
| Package | 16-SOIC (RW) | 16-SOIC (RW) | 16-SOIC (RW) | 16-SOIC (RW) |
| Device Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Driver Channel Count | 2 channels | 2 channels | 2 channels | 2 channels |
| Receiver Channel Count | 2 channels | 2 channels | 2 channels | 2 channels |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
主要差異化特點
- Combines two complete RS-232 channels in one 16-SOIC package (對比MAX3221IPWR)
- Uses compact charge-pump capacitors (對比MAX202IDG4)
- Provides specified bipolar RS-232 levels from one supply (對比MAX202IDG4)
設計說明
Place the 0.1 µF-compatible charge-pump capacitors and required bypass capacitors directly beside their associated ADM202JRWZ pins. Keep these loops short because charge-pump switching current produces high-frequency current edges. Route the charge-pump and driver paths away from receiver inputs to minimize differential crosstalk and maintain reliable operation across the supported RS-232 data rate.
Assign the two driver outputs and two receiver inputs according to the manufacturer pin-description table before finalizing the PCB. Keep each RS-232 cable route away from clocks, switching regulators, and high-current return paths. Provide a low-impedance ground reference, and use the connector entry area for any selected ESD or surge-protection components so chassis and system-ground decisions remain controlled.
Do not assume that every 16-SOIC RS-232 transceiver is electrically interchangeable. Before replacing ADM202JRWZ with ADM202JRN, ADM202JRNZ, or MAX202IDG4, compare charge-pump capacitor values, logic thresholds, driver and receiver enable functions, data rate, operating temperature, and ESD rating. The Z suffix denotes a tape-and-reel ordering option and should not be interpreted as an electrical change.
合規資訊
The product record identifies ADM202JRWZ as RoHS-compliant, lead-free, and green. AEC-Q100 status is not stated for this RS-232 interface IC and is treated as not applicable rather than qualified.