LM324PWRG4 - Quad 1.2MHz Op Amp in 14-TSSOP | TI
MPN: LM324PWRG4 ✓ چالاکLM324PWRG4 گشتی
An operational amplifier is an analog integrated circuit that compares an input voltage with a feedback voltage and drives its output to reduce the difference between them. The LM324 family belongs to the broader hierarchy of operational amplifier, analog amplifier, linear amplifier, and analog signal-processing IC. Its four independent channels allow one package to provide gain, buffering, active filtering, comparisons, summing, and differential amplification where a quad arrangement reduces board area and component count.
The principal features of the LM324PWRG4 include four amplifier channels in one package, a 1.2 MHz gain-bandwidth product, operation from a single 3 V supply or split supplies up to ±16 V, and internal frequency compensation. The device is intended for general-purpose applications rather than precision or high-speed signal chains. Its electrically symmetrical input arrangement supports common circuit configurations, while its industry-standard quad architecture makes it suitable for legacy designs requiring easy migration between compatible implementations.
Each channel contains high-gain, frequency-compensated amplification suitable for closed-loop gains from unity upward. Internal compensation avoids the need for an external dominant-pole capacitor in typical closed-loop amplifier configurations. This makes the device useful for general-purpose amplifier blocks, filters, and signal-conditioning stages where the operating frequency remains comfortably below the 1.2 MHz gain-bandwidth product. Because it is not positioned as a low-noise, low-offset precision amplifier, applications with demanding accuracy or high-frequency settling should use a more specialized amplifier family.
Typical uses include industrial sensor interfaces, audio preamplification, transducer signal conditioning, active filtering, comparators with reference feedback, battery-powered equipment, and four-channel control or monitoring systems. The wide supply range allows operation from conventional 5 V and 12 V rails as well as higher industrial or automotive supply arrangements. Its TSSOP package also supports compact surface-mount construction when board area matters more than the size offered by larger SOIC packages.
For stable operation, connect bypassing capacitors close to the supply pins, keep feedback routing short, and avoid long input traces where noise pickup could affect signal integrity. Check input and output voltage limits, common-mode range, output-current capability, and operating-temperature requirements against the manufacturer datasheet for the specific grade. Do not assume that a quad amplifier with the same footprint has identical offset, noise, common-mode, or load-drive characteristics without checking each replacement part.
This product page combines the LM324PWRG4 identification, package information, source datasheets, drop-in candidate screening, practical application guidance, and side-by-side engineering comparisons to support faster component selection and replacement planning.
جێگرەوەکانی جێگۆڕکێ بۆ LM324PWRG4 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM324PWRG4 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Amplifier Type, RoHS Status, Package, Number of Channels, Package Type.
LM324PWR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM324PWG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM324PT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM324PWRG4 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Channels | 4 independent channels |
| Gain-Bandwidth Product | 1.2 MHz |
| Supply Voltage Range | 3 V to 32 V total |
| Split-Supply Operating Range | ±16 V |
| Supply Configuration | Single supply or split supply |
| Internal Frequency Compensation | Yes |
| Amplifier Gain | High-gain, internally compensated |
| Package Type | 14-pin TSSOP |
| جۆری دامەزراندن | Surface mount |
| پلەی گەرمیی کارکردن | Up to 70 °C |
ڕێنمایی ڕێکخستنی پینی LM324PWRG4 14-pin tssop
ڕێکخستنی پین بۆ LM324PWRG4 (پاکێجی 14-pin tssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LM324PWRG4.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LM324PWRG4 گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Signal Conditioning, Audio Preamplification, Active Filter and Tone Control, Battery-Powered Monitoring Equipment, Comparator and Threshold Control, Automotive and Industrial Control Interfaces.
Industrial Sensor Signal Conditioning
The LM324PWRG4 fits four-channel industrial sensor interfaces because it combines four independent, internally compensated amplifiers with a 1.2 MHz gain-bandwidth product in one 14-pin TSSOP package. Each channel can amplify a sensor output, establish a bias level, or drive a feedback-defined filter stage while operating from a 3 V to 32 V total supply. This integration reduces board area compared with four separate single-amplifier packages. For instrumentation signals close to the supply rails, verify the input common-mode range and output swing before fixing the gain. Place bypass capacitance at the supply pins, keep feedback traces short, and use the manufacturer pinout when routing all four channels.
پێشنیارکراو
Audio Preamplification
The LM324PWRG4 can implement four general-purpose gain stages for small audio signals because each channel offers high gain with internal frequency compensation and a 1.2 MHz gain-bandwidth product. A 5 V single supply is compatible with its 3 V to 32 V operating range, although a mid-supply reference may be needed for biased bipolar input signals. Keep each amplifier’s input and feedback loop physically compact to minimize oscillation and noise pickup. The device is appropriate for conventional low-bandwidth preamplifier paths rather than demanding high-fidelity stages requiring very low noise, wide output swing, or fast large-signal settling.
پێشنیارکراو
Active Filter and Tone Control
The LM324PWRG4 is suitable for multi-pole active-filter and tone-control circuits when the signal bandwidth remains well below its 1.2 MHz gain-bandwidth product. Four independently compensated channels allow two amplifier sections to form a second-order filter section, while the remaining channels can provide buffering or another filter stage. Resistor and capacitor tolerances, grounding, and the selected closed-loop gain determine the achievable response. Place filter components close to their associated pins and keep the feedback network compact. The LM324 is a general-purpose solution, so designs requiring very low offset, very low distortion, or tight temperature stability should consider a precision amplifier family instead.
پێشنیارکراو
Battery-Powered Monitoring Equipment
The LM324PWRG4 supports low-voltage monitoring systems because it can operate from a 3 V single supply and combines four amplifier channels in one package. The channels may form gain stages for current, voltage, temperature, or status signals while the common supply range allows operation across several battery-derived rails. Its 1.2 MHz gain-bandwidth product is more than adequate for many slow sensor signals and supervisory functions. Designers should account for input bias current, common-mode headroom, and output load at the lowest supply voltage. Stable references, short high-impedance input routes, and local supply bypassing are important for reducing measurement errors in portable equipment.
پێشنیارکراو
Comparator and Threshold Control
The LM324PWRG4 can implement threshold detection and hysteretic comparator functions when feedback is used to bias the non-inverting input relative to the inverting input. Its four independent channels provide a compact way to monitor several system thresholds while operating from a 3 V to 32 V total supply. Internal frequency compensation supports the standard closed-loop configurations, and the 14-pin TSSOP package simplifies dense surface-mount layouts. Output rise and fall behavior depends on load and device characteristics, so verify the datasheet limits before driving large loads. Keep the reference divider and feedback path short, and add local bypassing to minimize switching-induced false triggering.
پێشنیارکراو
Automotive and Industrial Control Interfaces
The LM324PWRG4 is suitable for low-frequency control and interface blocks where a wide 3 V to 32 V supply range and four-channel integration simplify board design. The channels can amplify actuator feedback, condition discrete sensor outputs, or implement control-loop error amplifiers in systems that do not require rail-to-rail input and output operation. The documented operating-temperature limit reaches 70 °C, so it should be selected only when that rating satisfies the final ambient and junction-temperature requirements. Check grounding, transient response, and supply noise carefully in control systems, and use the manufacturer pinout to preserve compatibility across revisions.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM324PWRG4 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM324PWR | LM324PWG4 | LM324PT |
|---|---|---|---|---|
| Package | 14-pin TSSOP | 14-pin TSSOP | 14-pin TSSOP | 14-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Number of Channels | 4 independent channels | 4 independent channels | 4 independent channels | 4 independent channels |
| Amplifier Type | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz |
| Supply Voltage Range | 3 V to 32 V total | 3 V to 32 V total | 3 V to 32 V total | 3 V to 32 V total |
| Split-Supply Range | ±16 V | ±16 V | ±16 V | ±16 V |
| Frequency Compensation | Internal | Internal | Internal | Internal |
جیاکەرەوە سەرەکییەکان
- Four independent general-purpose amplifiers share one compact package (بەراورد بەLM324PWR)
- Single- and split-supply operation supports flexible system rails (بەراورد بەLM324PWG4)
- Internally compensated channels simplify standard amplifier layouts (بەراورد بەLM324PT)
تێبینییەکانی دیزاین
Decouple each supply connection with a high-frequency ceramic capacitor placed as close as practical to the package, and add bulk capacitance near the power source when the board has long supply traces. The LM324PWRG4 accepts a 3 V to 32 V total supply, but the usable input and output range still depends on the selected rail. Verify common-mode headroom and output swing before fixing resistor values, especially in single-supply designs where a midpoint reference is used.
Keep each feedback network compact and route it directly between the relevant output and input pins. Avoid routing high-impedance inputs beside digital, switching, or clock traces because leakage and capacitive coupling can shift the small signals handled by a general-purpose amplifier. Use a continuous ground plane, provide an unobstructed return path for supply current, and configure unused channels according to the manufacturer guidance rather than allowing their inputs to float.
Do not treat a matching TSSOP footprint as proof of unconditional substitution. Confirm pin numbering, input and output assignments, supply limits, common-mode range, output swing, temperature grade, and ordering suffix for every candidate. The LM324PWR, LM324PWG4, and LM324PT are documented family or comparison candidates, but the G4 designation and production requirements should be checked against the approved bill of materials before release.
The 1.2 MHz gain-bandwidth product is a small-signal specification, so operating bandwidth and stability depend on closed-loop gain, noise gain, load, and board parasitics. Place feedback resistors and compensation components close to the relevant pins, avoid long high-impedance input paths, and probe the amplifier output with suitable loading. For signals approaching the upper operating range or requiring fast settling, evaluate a higher-bandwidth amplifier rather than extrapolating beyond the general-purpose LM324 performance.
زانیاری پابەندبوون
Compliance status must be confirmed for the exact LM324PWRG4 ordering code using the manufacturer product page and current material-compliance records.