AD974BRZ vs AD974BRSZ Comparison

Detailed side-by-side comparison of AD974BRZ by Analog Devices and AD974BRSZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Analog Devices
AD974BRSZ AD974BRSZ - 16-Bit 4-Channel ADC | Analog Devices

AD974BRSZ - 16-Bit 4-Channel ADC | Analog Devices

AD974BRSZ ✓ Active

Specification Comparison

Parameter AD974BRZ AD974BRSZ
Brand Analog Devices Analog Devices
Category ADC/DAC ADC/DAC
Lifecycle Status Active Active
ADC Type Successive-approximation switched-capacitor ADC —
Resolution 16 bit 16 bit
Sampling Rate 200 kSPS —
Analog Input Channels 4 single-ended channels —
Input Multiplexer Integrated 4-channel analog multiplexer —
Supply Voltage +5 V 5 V
Internal Reference +2.5 V —
Unipolar Input Range 1 0 V to +4 V —
Unipolar Input Range 2 0 V to +5 V —
Bipolar Input Range ±10 V —
Interface High-speed serial interface —
Maximum Power Dissipation 120 mW —
Power-Down Mode Supported Yes
Factory Calibration Factory calibrated to minimize linearity and offset errors —
Package 28-pin SOIC, 0.295 inch / 7.50 mm width 28-pin SSOP
Mounting Type Surface mount Surface mount
Lead-Free Status Lead free —
RoHS Status RoHS compliant [DATA_NEEDED: RoHS compliance status]
Operating Temperature Range [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Analog Input Impedance [DATA_NEEDED: analog input impedance] —
Product Type — 4-channel data-acquisition ADC
Maximum Sampling Rate — 200 ksps
Number of Analog Input Channels — 4 channels
Converter Architecture — Successive-approximation switched-capacitor ADC
Internal Reference Voltage — 2.5 V
Input Range 1 — 0 V to 4 V
Input Range 2 — 0 V to 5 V
Input Range 3 — -10 V to +10 V
Digital Interface — Serial interface
Analog Input Multiplexer — 4-channel internal multiplexer
Power Supply Count — 1
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Digital Input Logic Levels — [DATA_NEEDED: digital input logic levels]
Analog Input Input Impedance — [DATA_NEEDED: analog input impedance]
Total Unadjusted Error — [DATA_NEEDED: total unadjusted error]
Integral Nonlinearity — [DATA_NEEDED: integral nonlinearity]
Differential Nonlinearity — [DATA_NEEDED: differential nonlinearity]
Signal-to-Noise Ratio — [DATA_NEEDED: signal-to-noise ratio]
ENOB — [DATA_NEEDED: effective number of bits]
Typical Power Dissipation — [DATA_NEEDED: typical power dissipation]
Power-Down Current — [DATA_NEEDED: power-down current]

Datasheets & Resources

Browse All Products Create BOM Request Quote