AD974BRZ vs AD974BRSZ तुलना
विस्तृत दोनों ओर की तुलना AD974BRZ द्वारा Analog Devices और AD974BRSZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | AD974BRZ | AD974BRSZ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| ADC Type | Successive-approximation switched-capacitor ADC | — |
| रेज़ोल्यूशन | 16 bit | 16 bit |
| सैंपलिंग रेट | 200 kSPS | — |
| Analog Input Channels | 4 single-ended channels | — |
| Input Multiplexer | Integrated 4-channel analog multiplexer | — |
| सप्लाई वोल्टेज | +5 V | 5 V |
| Internal Reference | +2.5 V | — |
| Unipolar Input Range 1 | 0 V to +4 V | — |
| Unipolar Input Range 2 | 0 V to +5 V | — |
| Bipolar Input Range | ±10 V | — |
| इंटरफ़ेस | High-speed serial interface | — |
| Maximum Power Dissipation | 120 mW | — |
| Power-Down Mode | Supported | Yes |
| Factory Calibration | Factory calibrated to minimize linearity and offset errors | — |
| पैकेज | 28-pin SOIC, 0.295 inch / 7.50 mm width | 28-pin SSOP |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Lead-Free Status | Lead free | — |
| RoHS स्थिति | RoHS compliant | [DATA_NEEDED: RoHS compliance status] |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Analog Input Impedance | [DATA_NEEDED: analog input impedance] | — |
| Product Type | — | 4-channel data-acquisition ADC |
| Maximum Sampling Rate | — | 200 ksps |
| Number of Analog Input Channels | — | 4 channels |
| Converter Architecture | — | Successive-approximation switched-capacitor ADC |
| Internal Reference Voltage | — | 2.5 V |
| Input Range 1 | — | 0 V to 4 V |
| Input Range 2 | — | 0 V to 5 V |
| Input Range 3 | — | -10 V to +10 V |
| Digital Interface | — | Serial interface |
| Analog Input Multiplexer | — | 4-channel internal multiplexer |
| Power Supply Count | — | 1 |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Digital Input Logic Levels | — | [DATA_NEEDED: digital input logic levels] |
| Analog Input Input Impedance | — | [DATA_NEEDED: analog input impedance] |
| Total Unadjusted Error | — | [DATA_NEEDED: total unadjusted error] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |
| Differential Nonlinearity | — | [DATA_NEEDED: differential nonlinearity] |
| Signal-to-Noise Ratio | — | [DATA_NEEDED: signal-to-noise ratio] |
| ENOB | — | [DATA_NEEDED: effective number of bits] |
| Typical Power Dissipation | — | [DATA_NEEDED: typical power dissipation] |
| Power-Down Current | — | [DATA_NEEDED: power-down current] |