AD974BRZ vs AD974BRSZ Perbandingan
Perbandingan bersamaan detil AD974BRZ dari Analog Devices dan AD974BRSZ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | AD974BRZ | AD974BRSZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Aktif | Aktif |
| ADC Type | Successive-approximation switched-capacitor ADC | — |
| Resolusi | 16 bit | 16 bit |
| Laju Pengambilan Sampel | 200 kSPS | — |
| Analog Input Channels | 4 single-ended channels | — |
| Input Multiplexer | Integrated 4-channel analog multiplexer | — |
| Tegangan Pemuat | +5 V | 5 V |
| Internal Reference | +2.5 V | — |
| Unipolar Input Range 1 | 0 V to +4 V | — |
| Unipolar Input Range 2 | 0 V to +5 V | — |
| Bipolar Input Range | ±10 V | — |
| Antarmuka | High-speed serial interface | — |
| Maximum Power Dissipation | 120 mW | — |
| Power-Down Mode | Supported | Yes |
| Factory Calibration | Factory calibrated to minimize linearity and offset errors | — |
| Paket | 28-pin SOIC, 0.295 inch / 7.50 mm width | 28-pin SSOP |
| Tipe Mounting | Surface mount | Surface mount |
| Lead-Free Status | Lead free | — |
| Status RoHS | RoHS compliant | [DATA_NEEDED: RoHS compliance status] |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Analog Input Impedance | [DATA_NEEDED: analog input impedance] | — |
| Product Type | — | 4-channel data-acquisition ADC |
| Maximum Sampling Rate | — | 200 ksps |
| Number of Analog Input Channels | — | 4 channels |
| Converter Architecture | — | Successive-approximation switched-capacitor ADC |
| Internal Reference Voltage | — | 2.5 V |
| Input Range 1 | — | 0 V to 4 V |
| Input Range 2 | — | 0 V to 5 V |
| Input Range 3 | — | -10 V to +10 V |
| Digital Interface | — | Serial interface |
| Analog Input Multiplexer | — | 4-channel internal multiplexer |
| Power Supply Count | — | 1 |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Digital Input Logic Levels | — | [DATA_NEEDED: digital input logic levels] |
| Analog Input Input Impedance | — | [DATA_NEEDED: analog input impedance] |
| Total Unadjusted Error | — | [DATA_NEEDED: total unadjusted error] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |
| Differential Nonlinearity | — | [DATA_NEEDED: differential nonlinearity] |
| Signal-to-Noise Ratio | — | [DATA_NEEDED: signal-to-noise ratio] |
| ENOB | — | [DATA_NEEDED: effective number of bits] |
| Typical Power Dissipation | — | [DATA_NEEDED: typical power dissipation] |
| Power-Down Current | — | [DATA_NEEDED: power-down current] |