AD974BRZ vs AD974BRSZ 比較

詳細並排比較 AD974BRZ 由 Analog Devices 與 AD974BRSZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Analog Devices
AD974BRZ AD974BRZ - 4-Channel 16-Bit 200kSPS ADC | Analog Devices

AD974BRZ - 4-Channel 16-Bit 200kSPS ADC | Analog Devices

AD974BRZ ✓ 啟用中
Analog Devices
AD974BRSZ AD974BRSZ - 16-Bit 4-Channel ADC | Analog Devices

AD974BRSZ - 16-Bit 4-Channel ADC | Analog Devices

AD974BRSZ ✓ 啟用中

規格比較

參數 AD974BRZ AD974BRSZ
品牌 Analog Devices Analog Devices
類別 ADC/DAC ADC/DAC
生命週期狀態 啟用中 啟用中
ADC Type Successive-approximation switched-capacitor ADC —
解析度 16 bit 16 bit
取樣率 200 kSPS —
Analog Input Channels 4 single-ended channels —
Input Multiplexer Integrated 4-channel analog multiplexer —
供應電壓 +5 V 5 V
Internal Reference +2.5 V —
Unipolar Input Range 1 0 V to +4 V —
Unipolar Input Range 2 0 V to +5 V —
Bipolar Input Range ±10 V —
介面 High-speed serial interface —
Maximum Power Dissipation 120 mW —
Power-Down Mode Supported Yes
Factory Calibration Factory calibrated to minimize linearity and offset errors —
封裝 28-pin SOIC, 0.295 inch / 7.50 mm width 28-pin SSOP
安裝類型 Surface mount Surface mount
Lead-Free Status Lead free —
RoHS 狀態 RoHS compliant [DATA_NEEDED: RoHS compliance status]
工作溫度範圍 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Analog Input Impedance [DATA_NEEDED: analog input impedance] —
Product Type — 4-channel data-acquisition ADC
Maximum Sampling Rate — 200 ksps
Number of Analog Input Channels — 4 channels
Converter Architecture — Successive-approximation switched-capacitor ADC
Internal Reference Voltage — 2.5 V
Input Range 1 — 0 V to 4 V
Input Range 2 — 0 V to 5 V
Input Range 3 — -10 V to +10 V
Digital Interface — Serial interface
Analog Input Multiplexer — 4-channel internal multiplexer
Power Supply Count — 1
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Digital Input Logic Levels — [DATA_NEEDED: digital input logic levels]
Analog Input Input Impedance — [DATA_NEEDED: analog input impedance]
Total Unadjusted Error — [DATA_NEEDED: total unadjusted error]
Integral Nonlinearity — [DATA_NEEDED: integral nonlinearity]
Differential Nonlinearity — [DATA_NEEDED: differential nonlinearity]
Signal-to-Noise Ratio — [DATA_NEEDED: signal-to-noise ratio]
ENOB — [DATA_NEEDED: effective number of bits]
Typical Power Dissipation — [DATA_NEEDED: typical power dissipation]
Power-Down Current — [DATA_NEEDED: power-down current]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價