AD974BRZ vs AD974BRSZ Karşılaştırma

Ayrıntılı yan yana karşılaştırma AD974BRZ tarafından Analog Devices ve AD974BRSZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Analog Devices
AD974BRSZ AD974BRSZ - 16-Bit 4-Channel ADC | Analog Devices

AD974BRSZ - 16-Bit 4-Channel ADC | Analog Devices

AD974BRSZ ✓ Aktif

Özellik Karşılaştırması

Parametre AD974BRZ AD974BRSZ
Marka Analog Devices Analog Devices
Kategori ADC/DAC ADC/DAC
Yaşam Döngüsü Durumu Aktif Aktif
ADC Type Successive-approximation switched-capacitor ADC —
Çözünürlük 16 bit 16 bit
Ölçekleme Oranı 200 kSPS —
Analog Input Channels 4 single-ended channels —
Input Multiplexer Integrated 4-channel analog multiplexer —
Besleme Gerilimi +5 V 5 V
Internal Reference +2.5 V —
Unipolar Input Range 1 0 V to +4 V —
Unipolar Input Range 2 0 V to +5 V —
Bipolar Input Range ±10 V —
Arayüz High-speed serial interface —
Maximum Power Dissipation 120 mW —
Power-Down Mode Supported Yes
Factory Calibration Factory calibrated to minimize linearity and offset errors —
Paket 28-pin SOIC, 0.295 inch / 7.50 mm width 28-pin SSOP
Montaj Türü Surface mount Surface mount
Lead-Free Status Lead free —
RoHS Durumu RoHS compliant [DATA_NEEDED: RoHS compliance status]
İşletim Sıcaklığı Aralığı [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Analog Input Impedance [DATA_NEEDED: analog input impedance] —
Product Type — 4-channel data-acquisition ADC
Maximum Sampling Rate — 200 ksps
Number of Analog Input Channels — 4 channels
Converter Architecture — Successive-approximation switched-capacitor ADC
Internal Reference Voltage — 2.5 V
Input Range 1 — 0 V to 4 V
Input Range 2 — 0 V to 5 V
Input Range 3 — -10 V to +10 V
Digital Interface — Serial interface
Analog Input Multiplexer — 4-channel internal multiplexer
Power Supply Count — 1
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Digital Input Logic Levels — [DATA_NEEDED: digital input logic levels]
Analog Input Input Impedance — [DATA_NEEDED: analog input impedance]
Total Unadjusted Error — [DATA_NEEDED: total unadjusted error]
Integral Nonlinearity — [DATA_NEEDED: integral nonlinearity]
Differential Nonlinearity — [DATA_NEEDED: differential nonlinearity]
Signal-to-Noise Ratio — [DATA_NEEDED: signal-to-noise ratio]
ENOB — [DATA_NEEDED: effective number of bits]
Typical Power Dissipation — [DATA_NEEDED: typical power dissipation]
Power-Down Current — [DATA_NEEDED: power-down current]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin